1
|
Abstract
Antibodies are considered the hallmark of the adaptive immune system in that they mediate various key biological functions, such as direct neutralization and recruitment of effector immune cells to eliminate invading pathogens. Antibodies exhibit several unique properties, including high diversity (enabling binding to a wide range of targets), high specificity and structural integrity. These properties and the understanding that antibodies can be utilized in a wide range of applications have motivated the scientific community to develop new approaches for antibody repertoire analysis and rapid monoclonal antibody discovery. Today, antibodies are key modules in the pharmaceutical and diagnostic industries. By virtue of their high affinity and specificity to their targets and the availability of technologies to engineer different antibodies to a wide range of targets, antibodies have become the most promising natural biological molecules in a range of biotechnological applications, such as: highly specific and sensitive nanobiosensors for the diagnostics of different biomarkers; nanoparticle-based targeted drug delivery systems to certain cells or tissues; and nanomachines, which are nanoscale mechanical devices that enable energy conversion into precise mechanical motions in response to specific molecular inputs. In this review, we start by describing the unique properties of antibodies, how antibody diversity is generated, and the available technologies for antibody repertoire analysis and antibody discovery. Thereafter, we provide an overview of some antibody-based nanotechnologies and discuss novel and promising approaches for the application of antibodies in the nanotechnology field. Overall, we aim to bridge the knowledge gap between the nanotechnology and antibody engineering disciplines by demonstrating how technological advances in the antibody field can be leveraged to develop and/or enhance new technological approaches in the nanotechnology field.
Collapse
Affiliation(s)
- Yaron Hillman
- School of Molecular Cell Biology and Biotechnology, George S. Wise Faculty of Life Sciences, Tel-Aviv University, Tel-Aviv 69978, Israel
| | | | | |
Collapse
|
2
|
Zhang P, Yang S, Pineda-Gómez R, Ibarlucea B, Ma J, Lohe MR, Akbar TF, Baraban L, Cuniberti G, Feng X. Electrochemically Exfoliated High-Quality 2H-MoS 2 for Multiflake Thin Film Flexible Biosensors. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2019; 15:e1901265. [PMID: 31034144 DOI: 10.1002/smll.201901265] [Citation(s) in RCA: 28] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/10/2019] [Revised: 04/13/2019] [Indexed: 06/09/2023]
Abstract
2D molybdenum disulfide (MoS2 ) gives a new inspiration for the field of nanoelectronics, photovoltaics, and sensorics. However, the most common processing technology, e.g., liquid-phase based scalable exfoliation used for device fabrication, leads to the number of shortcomings that impede their large area production and integration. Major challenges are associated with the small size and low concentration of MoS2 flakes, as well as insufficient control over their physical properties, e.g., internal heterogeneity of the metallic and semiconducting phases. Here it is demonstrated that large semiconducting MoS2 sheets (with dimensions up to 50 µm) can be obtained by a facile cathodic exfoliation approach in nonaqueous electrolyte. The synthetic process avoids surface oxidation thus preserving the MoS2 sheets with intact crystalline structure. It is further demonstrated at the proof-of-concept level, a solution-processed large area (60 × 60 µm) flexible Ebola biosensor, based on a MoS2 thin film (6 µm thickness) fabricated via restacking of the multiple flakes on the polyimide substrate. The experimental results reveal a low detection limit (in femtomolar-picomolar range) of the fabricated sensor devices. The presented exfoliation method opens up new opportunities for fabrication of large arrays of multifunctional biomedical devices based on novel 2D materials.
Collapse
Affiliation(s)
- Panpan Zhang
- Chair for Molecular Functional Materials, Department of Chemistry and Food Chemistry, School of Science, Technische Universität Dresden, Mommsenstr. 4, 01069, Dresden, Germany
- Center for Advancing Electronics Dresden (cfaed), Technische Universität Dresden, 01062, Dresden, Germany
| | - Sheng Yang
- Chair for Molecular Functional Materials, Department of Chemistry and Food Chemistry, School of Science, Technische Universität Dresden, Mommsenstr. 4, 01069, Dresden, Germany
- Center for Advancing Electronics Dresden (cfaed), Technische Universität Dresden, 01062, Dresden, Germany
| | - Roberto Pineda-Gómez
- Max Bergman Center of Biomaterials Dresden and Institute for Materials Science, Technische Universität Dresden, 01062, Dresden, Germany
| | - Bergoi Ibarlucea
- Center for Advancing Electronics Dresden (cfaed), Technische Universität Dresden, 01062, Dresden, Germany
- Max Bergman Center of Biomaterials Dresden and Institute for Materials Science, Technische Universität Dresden, 01062, Dresden, Germany
| | - Ji Ma
- Chair for Molecular Functional Materials, Department of Chemistry and Food Chemistry, School of Science, Technische Universität Dresden, Mommsenstr. 4, 01069, Dresden, Germany
- Center for Advancing Electronics Dresden (cfaed), Technische Universität Dresden, 01062, Dresden, Germany
| | - Martin R Lohe
- Chair for Molecular Functional Materials, Department of Chemistry and Food Chemistry, School of Science, Technische Universität Dresden, Mommsenstr. 4, 01069, Dresden, Germany
- Center for Advancing Electronics Dresden (cfaed), Technische Universität Dresden, 01062, Dresden, Germany
| | - Teuku Fawzul Akbar
- Max Bergman Center of Biomaterials Dresden and Institute for Materials Science, Technische Universität Dresden, 01062, Dresden, Germany
| | - Larysa Baraban
- Center for Advancing Electronics Dresden (cfaed), Technische Universität Dresden, 01062, Dresden, Germany
- Max Bergman Center of Biomaterials Dresden and Institute for Materials Science, Technische Universität Dresden, 01062, Dresden, Germany
| | - Gianaurelio Cuniberti
- Center for Advancing Electronics Dresden (cfaed), Technische Universität Dresden, 01062, Dresden, Germany
- Max Bergman Center of Biomaterials Dresden and Institute for Materials Science, Technische Universität Dresden, 01062, Dresden, Germany
| | - Xinliang Feng
- Chair for Molecular Functional Materials, Department of Chemistry and Food Chemistry, School of Science, Technische Universität Dresden, Mommsenstr. 4, 01069, Dresden, Germany
- Center for Advancing Electronics Dresden (cfaed), Technische Universität Dresden, 01062, Dresden, Germany
| |
Collapse
|
3
|
Xu M, Obodo D, Yadavalli VK. The design, fabrication, and applications of flexible biosensing devices. Biosens Bioelectron 2019; 124-125:96-114. [PMID: 30343162 PMCID: PMC6310145 DOI: 10.1016/j.bios.2018.10.019] [Citation(s) in RCA: 63] [Impact Index Per Article: 12.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/28/2018] [Revised: 09/29/2018] [Accepted: 10/09/2018] [Indexed: 12/13/2022]
Abstract
Flexible biosensors form part of a rapidly growing research field that take advantage of a multidisciplinary approach involving materials, fabrication and design strategies to be able to function at biological interfaces that may be soft, intrinsically curvy, irregular, or elastic. Numerous exciting advancements are being proposed and developed each year towards applications in healthcare, fundamental biomedical research, food safety and environmental monitoring. In order to place these developments in perspective, this review is intended to present an overview on field of flexible biosensor development. We endeavor to show how this subset of the broader field of flexible and wearable devices presents unique characteristics inherent in their design. Initially, a discussion on the structure of flexible biosensors is presented to address the critical issues specific to their design. We then summarize the different materials as substrates that can resist mechanical deformation while retaining their function of the bioreceptors and active elements. Several examples of flexible biosensors are presented based on the different environments in which they may be deployed or on the basis of targeted biological analytes. Challenges and future perspectives pertinent to the current and future stages of development are presented. Through these summaries and discussion, this review is expected to provide insights towards a systematic and fundamental understanding for the fabrication and utilization of flexible biosensors, as well as inspire and improve designs for smart and effective devices in the future.
Collapse
Affiliation(s)
- Meng Xu
- Department of Chemical and Life Science Engineering, Virginia Commonwealth University, 601 W Main Street, Richmond, VA 23284, USA
| | - Dora Obodo
- Department of Chemical and Life Science Engineering, Virginia Commonwealth University, 601 W Main Street, Richmond, VA 23284, USA
| | - Vamsi K Yadavalli
- Department of Chemical and Life Science Engineering, Virginia Commonwealth University, 601 W Main Street, Richmond, VA 23284, USA.
| |
Collapse
|
4
|
Promphet N, Rattanawaleedirojn P, Siralertmukul K, Soatthiyanon N, Potiyaraj P, Thanawattano C, Hinestroza JP, Rodthongkum N. Non-invasive textile based colorimetric sensor for the simultaneous detection of sweat pH and lactate. Talanta 2019; 192:424-430. [PMID: 30348413 DOI: 10.1016/j.snb.2020.128549] [Citation(s) in RCA: 44] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/26/2018] [Revised: 09/21/2018] [Accepted: 09/23/2018] [Indexed: 05/18/2023]
Abstract
A non-invasive textile-based colorimetric sensor for the simultaneous detection of sweat pH and lactate was created by depositing of three different layers onto a cotton fabric: 1.) chitosan, 2.) sodium carboxymethyl cellulose, and 3.) indicator dye or lactate assay. This sensor was characterized using field emission scanning electron microscopy and fourier transform infrared spectroscopy. Then, this sensor was used to measure pH and lactate concentration using the same sweat sample. The sensing element for sweat pH was composed of a mixture of methyl orange and bromocresol green while a lactate enzymatic assay was chosen for the lactate sensor. The pH indicator gradually shifted from red to blue as the pH increased, whereas the purple color intensity increased with the concentration of lactate in the sweat. By comparing these colors with a standard calibration, this platform can be used to estimate the sweat pH (1-14) and the lactate level (0-25 mM). Fading of the colors of this sensor was prevented by using cetyltrimethylammonium bromide (CTAB). The flexibility of this textile based sensor allows it to be incorporated into sport apparels and accessories hence potentially enabling real-time and continuous monitoring of sweat pH and lactate. This non-invasive sensing platform might open a new avenue for personal health monitoring and medical diagnosis as well as for determining of the physiological conditions of endurance athletes.
Collapse
Affiliation(s)
- Nadtinan Promphet
- Nanoscience and Technology Interdisciplinary Program, Graduate School, Chulalongkorn University, Phayathai Road, Pathumwan, Bangkok 10330, Thailand
| | - Pranee Rattanawaleedirojn
- Metallurgy and Materials Science Research Institute, Chulalongkorn University, Soi Chula 12, Phayathai Road, Pathumwan, Bangkok 10330, Thailand
| | - Krisana Siralertmukul
- Metallurgy and Materials Science Research Institute, Chulalongkorn University, Soi Chula 12, Phayathai Road, Pathumwan, Bangkok 10330, Thailand
| | - Niphaphun Soatthiyanon
- Metallurgy and Materials Science Research Institute, Chulalongkorn University, Soi Chula 12, Phayathai Road, Pathumwan, Bangkok 10330, Thailand
| | - Pranut Potiyaraj
- Metallurgy and Materials Science Research Institute, Chulalongkorn University, Soi Chula 12, Phayathai Road, Pathumwan, Bangkok 10330, Thailand
| | - Chusak Thanawattano
- National Electronics and Computer Technology Center (NECTEC), Pathumthani 12120, Thailand
| | - Juan P Hinestroza
- Department of Fiber Science, College of Human Ecology, Cornell University, Ithaca, NY 14850, United States
| | - Nadnudda Rodthongkum
- Metallurgy and Materials Science Research Institute, Chulalongkorn University, Soi Chula 12, Phayathai Road, Pathumwan, Bangkok 10330, Thailand.
| |
Collapse
|
5
|
Xu YJ, Su MM, Li HL, Liu QX, Xu C, Yang YS, Zhu HL. A fluorescent sensor for discrimination of HSA from BSA through selectivity evolution. Anal Chim Acta 2018; 1043:123-131. [DOI: 10.1016/j.aca.2018.09.010] [Citation(s) in RCA: 27] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/26/2018] [Revised: 09/03/2018] [Accepted: 09/05/2018] [Indexed: 01/20/2023]
|
6
|
Economou A, Kokkinos C, Prodromidis M. Flexible plastic, paper and textile lab-on-a chip platforms for electrochemical biosensing. LAB ON A CHIP 2018; 18:1812-1830. [PMID: 29855637 DOI: 10.1039/c8lc00025e] [Citation(s) in RCA: 67] [Impact Index Per Article: 11.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/24/2023]
Abstract
Flexible biosensors represent an increasingly important and rapidly developing field of research. Flexible materials offer several advantages as supports of biosensing platforms in terms of flexibility, weight, conformability, portability, cost, disposability and scope for integration. On the other hand, electrochemical detection is perfectly suited to flexible biosensing devices. The present paper reviews the field of integrated electrochemical bionsensors fabricated on flexible materials (plastic, paper and textiles) which are used as functional base substrates. The vast majority of electrochemical flexible lab-on-a-chip (LOC) biosensing devices are based on plastic supports in a single or layered configuration. Among these, wearable devices are perhaps the ones that most vividly demonstrate the utility of the concept of flexible biosensors while diagnostic cards represent the state-of-the art in terms of integration and functionality. Another important type of flexible biosensors utilize paper as a functional support material enabling the fabrication of low-cost and disposable paper-based devices operating on the lateral flow, drop-casting or folding (origami) principles. Finally, textile-based biosensors are beginning to emerge enabling real-time measurements in the working environment or in wound care applications. This review is timely due to the significant advances that have taken place over the last few years in the area of LOC biosensors and aims to direct the readers to emerging trends in this field.
Collapse
|
7
|
Teradal NL, Jelinek R. Carbon Nanomaterials in Biological Studies and Biomedicine. Adv Healthc Mater 2017; 6. [PMID: 28777502 DOI: 10.1002/adhm.201700574] [Citation(s) in RCA: 98] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2017] [Revised: 06/12/2017] [Indexed: 12/31/2022]
Abstract
The "carbon nano-world" has made over the past few decades huge contributions in diverse scientific disciplines and technological advances. While dramatic advances have been widely publicized in using carbon nanomaterials such as fullerenes, carbon nanotubes, and graphene in materials sciences, nano-electronics, and photonics, their contributions to biology and biomedicine have been noteworthy as well. This Review focuses on the use of carbon nanotubes (CNTs), graphene, and carbon quantum dots [encompassing graphene quantum dots (GQDs) and carbon dots (C-dots)] in biologically oriented materials and applications. Examples of these remarkable nanomaterials in bio-sensing, cell- and tissue-imaging, regenerative medicine, and other applications are presented and discussed, emphasizing the significance of their unique properties and their future potential.
Collapse
Affiliation(s)
- Nagappa L. Teradal
- Department of Chemistry and Ilse Katz Institute for Nanotechnology; Ben Gurion University of the Negev; Beer Sheva 84105 Israel
| | - Raz Jelinek
- Department of Chemistry and Ilse Katz Institute for Nanotechnology; Ben Gurion University of the Negev; Beer Sheva 84105 Israel
| |
Collapse
|
8
|
Farka Z, Juřík T, Kovář D, Trnková L, Skládal P. Nanoparticle-Based Immunochemical Biosensors and Assays: Recent Advances and Challenges. Chem Rev 2017; 117:9973-10042. [DOI: 10.1021/acs.chemrev.7b00037] [Citation(s) in RCA: 414] [Impact Index Per Article: 59.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Affiliation(s)
- Zdeněk Farka
- Central
European Institute of Technology (CEITEC), ‡Department of Biochemistry, Faculty
of Science, and §Department of Chemistry, Faculty of Science, Masaryk University, Kamenice 5, 625 00 Brno, Czech Republic
| | - Tomáš Juřík
- Central
European Institute of Technology (CEITEC), ‡Department of Biochemistry, Faculty
of Science, and §Department of Chemistry, Faculty of Science, Masaryk University, Kamenice 5, 625 00 Brno, Czech Republic
| | - David Kovář
- Central
European Institute of Technology (CEITEC), ‡Department of Biochemistry, Faculty
of Science, and §Department of Chemistry, Faculty of Science, Masaryk University, Kamenice 5, 625 00 Brno, Czech Republic
| | - Libuše Trnková
- Central
European Institute of Technology (CEITEC), ‡Department of Biochemistry, Faculty
of Science, and §Department of Chemistry, Faculty of Science, Masaryk University, Kamenice 5, 625 00 Brno, Czech Republic
| | - Petr Skládal
- Central
European Institute of Technology (CEITEC), ‡Department of Biochemistry, Faculty
of Science, and §Department of Chemistry, Faculty of Science, Masaryk University, Kamenice 5, 625 00 Brno, Czech Republic
| |
Collapse
|
9
|
Kumar S, Rani R, Dilbaghi N, Tankeshwar K, Kim KH. Carbon nanotubes: a novel material for multifaceted applications in human healthcare. Chem Soc Rev 2017; 46:158-196. [DOI: 10.1039/c6cs00517a] [Citation(s) in RCA: 263] [Impact Index Per Article: 37.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
Remarkable advances achieved in modern material technology, especially in device fabrication, have facilitated diverse materials to expand the list of their application fields.
Collapse
Affiliation(s)
- Sandeep Kumar
- Department of Bio and Nano Technology
- Guru Jambheshwar University of Science and Technology
- Hisar
- India
| | - Ruma Rani
- Department of Bio and Nano Technology
- Guru Jambheshwar University of Science and Technology
- Hisar
- India
| | - Neeraj Dilbaghi
- Department of Bio and Nano Technology
- Guru Jambheshwar University of Science and Technology
- Hisar
- India
| | - K. Tankeshwar
- Department of Bio and Nano Technology
- Guru Jambheshwar University of Science and Technology
- Hisar
- India
- Department of Physics
| | - Ki-Hyun Kim
- Department of Civil & Environmental Engineering
- Hanyang University
- Seoul 04763
- Republic of Korea
| |
Collapse
|
10
|
Mostafalu P, Nezhad AS, Nikkhah M, Akbari M. Flexible Electronic Devices for Biomedical Applications. ACTA ACUST UNITED AC 2016. [DOI: 10.1007/978-3-319-32180-6_16] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
11
|
Haarindraprasad R, Hashim U, Gopinath SC, Perumal V, Liu WW, Balakrishnan S. Fabrication of interdigitated high-performance zinc oxide nanowire modified electrodes for glucose sensing. Anal Chim Acta 2016; 925:70-81. [DOI: 10.1016/j.aca.2016.04.030] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/30/2015] [Revised: 03/16/2016] [Accepted: 04/15/2016] [Indexed: 11/17/2022]
|
12
|
Tu MC, Chen HY, Wang Y, Moochhala SM, Alagappan P, Liedberg B. Immunosensor based on carbon nanotube/manganese dioxide electrochemical tags. Anal Chim Acta 2014; 853:228-233. [PMID: 25467463 DOI: 10.1016/j.aca.2014.09.050] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/09/2014] [Revised: 09/22/2014] [Accepted: 09/26/2014] [Indexed: 10/24/2022]
Abstract
This article reports on carbon nanotube/manganese dioxide (CNT-MnO2) composites as electrochemical tags for non-enzymatic signal amplification in immunosensing. The synthesized CNT-MnO2 composites showed good electrochemical activity, electrical conductivity and stability. The electrochemical signal of CNT-MnO2 composites coated glassy carbon electrode (GCE) increased by nearly two orders of magnitude compared to bare GCE in hydrogen peroxide (H2O2) environment. CNT-MnO2 composite was subsequently validated as electrochemical tags for sensitive detection of α-fetoprotein (AFP), a tumor marker for diagnosing hepatocellular carcinoma. The electrochemical immunosensor demonstrated a linear response on a log-scale for AFP concentrations ranging from 0.2 to 100 ng mL(-1). The limit of detection (LOD) was estimated to be 40 pg mL(-1) (S/N=3) in PBS buffer. Further measurements using AFP spiked plasma samples revealed the applicability of fabricated CNT-MnO2 composites for clinical and diagnostic applications.
Collapse
Affiliation(s)
- Meng-Che Tu
- School of Materials Science and Engineering, Nanyang Technological University, Nanyang Avenue, 639798, Singapore; Center for Biomimetic Sensor Science, 50 Nanyang Drive, 637553, Singapore
| | - Han-Yi Chen
- School of Materials Science and Engineering, Nanyang Technological University, Nanyang Avenue, 639798, Singapore; Tum Create, 1 Create Way #10-02 Create Tower, 138602, Singapore
| | - Yuxi Wang
- Tum Create, 1 Create Way #10-02 Create Tower, 138602, Singapore
| | | | - Palaniappan Alagappan
- School of Materials Science and Engineering, Nanyang Technological University, Nanyang Avenue, 639798, Singapore; Center for Biomimetic Sensor Science, 50 Nanyang Drive, 637553, Singapore
| | - Bo Liedberg
- School of Materials Science and Engineering, Nanyang Technological University, Nanyang Avenue, 639798, Singapore; Center for Biomimetic Sensor Science, 50 Nanyang Drive, 637553, Singapore.
| |
Collapse
|
13
|
Wujcik EK, Wei H, Zhang X, Guo J, Yan X, Sutrave N, Wei S, Guo Z. Antibody nanosensors: a detailed review. RSC Adv 2014. [DOI: 10.1039/c4ra07119k] [Citation(s) in RCA: 60] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
|
14
|
Azoubel S, Magdassi S. Controlling adhesion properties of SWCNT-PET films prepared by wet deposition. ACS APPLIED MATERIALS & INTERFACES 2014; 6:9265-9271. [PMID: 24921668 DOI: 10.1021/am501488p] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
Due to their unique properties, carbon nanotubes (CNTs) have been used as thin electrodes in plastic optoelectronic devices. In many applications, it is required that CNT electrodes be transparent, conductive and flexible, and most importantly, mechanically stable with good adhesion to the polymeric substrate. In this paper, we report on achieving SWCNT transparent and conductive films with excellent adhesion to polyethylene terephthalate, without any binder, by a simple and rapid post-treatment process. It was found that the best adhesion was achieved upon treating the films with acetic acid and formic acid, and with solutions containing 1-70% HNO3. Morphological evaluations indicate the unique adhesion due to the SWCNT becoming partly embedded within the polymeric substrate during the post-treatment process, thus yielding flexible conductive films with high transparency.
Collapse
Affiliation(s)
- Suzanna Azoubel
- Casali Institute of Applied Chemistry, Institute of Chemistry, The Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem , 91904 Jerusalem, Israel
| | | |
Collapse
|
15
|
Saito N, Haniu H, Usui Y, Aoki K, Hara K, Takanashi S, Shimizu M, Narita N, Okamoto M, Kobayashi S, Nomura H, Kato H, Nishimura N, Taruta S, Endo M. Safe clinical use of carbon nanotubes as innovative biomaterials. Chem Rev 2014; 114:6040-79. [PMID: 24720563 PMCID: PMC4059771 DOI: 10.1021/cr400341h] [Citation(s) in RCA: 140] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/26/2013] [Indexed: 02/06/2023]
Affiliation(s)
- Naoto Saito
- Institute
for Biomedical Sciences, Shinshu University, Asahi 3-1-1, Matsumoto 390-8621, Japan
| | - Hisao Haniu
- Department
of Orthopaedic Surgery, Shinshu University
School of Medicine, Asahi
3-1-1, Matsumoto 390-8621, Japan
| | - Yuki Usui
- Department
of Orthopaedic Surgery, Shinshu University
School of Medicine, Asahi
3-1-1, Matsumoto 390-8621, Japan
- Research Center for Exotic Nanocarbons, and Faculty of Engineering, Shinshu University, Wakasato 4-17-1, Nagano 380-8553, Japan
| | - Kaoru Aoki
- Department
of Orthopaedic Surgery, Shinshu University
School of Medicine, Asahi
3-1-1, Matsumoto 390-8621, Japan
| | - Kazuo Hara
- Department
of Orthopaedic Surgery, Shinshu University
School of Medicine, Asahi
3-1-1, Matsumoto 390-8621, Japan
| | - Seiji Takanashi
- Department
of Orthopaedic Surgery, Shinshu University
School of Medicine, Asahi
3-1-1, Matsumoto 390-8621, Japan
| | - Masayuki Shimizu
- Department
of Orthopaedic Surgery, Shinshu University
School of Medicine, Asahi
3-1-1, Matsumoto 390-8621, Japan
| | - Nobuyo Narita
- Department
of Orthopaedic Surgery, Shinshu University
School of Medicine, Asahi
3-1-1, Matsumoto 390-8621, Japan
| | - Masanori Okamoto
- Department
of Orthopaedic Surgery, Shinshu University
School of Medicine, Asahi
3-1-1, Matsumoto 390-8621, Japan
| | - Shinsuke Kobayashi
- Department
of Orthopaedic Surgery, Shinshu University
School of Medicine, Asahi
3-1-1, Matsumoto 390-8621, Japan
| | - Hiroki Nomura
- Department
of Orthopaedic Surgery, Shinshu University
School of Medicine, Asahi
3-1-1, Matsumoto 390-8621, Japan
| | - Hiroyuki Kato
- Department
of Orthopaedic Surgery, Shinshu University
School of Medicine, Asahi
3-1-1, Matsumoto 390-8621, Japan
| | - Naoyuki Nishimura
- R&D
Center, Nakashima Medical Co. Ltd., Haga 5322, Kita-ku, Okayama 701-1221, Japan
| | - Seiichi Taruta
- Research Center for Exotic Nanocarbons, and Faculty of Engineering, Shinshu University, Wakasato 4-17-1, Nagano 380-8553, Japan
| | - Morinobu Endo
- Research Center for Exotic Nanocarbons, and Faculty of Engineering, Shinshu University, Wakasato 4-17-1, Nagano 380-8553, Japan
| |
Collapse
|
16
|
Ding L, Bond AM, Zhai J, Zhang J. Utilization of nanoparticle labels for signal amplification in ultrasensitive electrochemical affinity biosensors: A review. Anal Chim Acta 2013; 797:1-12. [DOI: 10.1016/j.aca.2013.07.035] [Citation(s) in RCA: 79] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/29/2013] [Revised: 07/08/2013] [Accepted: 07/14/2013] [Indexed: 12/11/2022]
|
17
|
Yue X, Pang S, Han P, Zhang C, Wang J, Zhang L. Carbon nanotubes/carbon paper composite electrode for sensitive detection of catechol in the presence of hydroquinone. Electrochem commun 2013. [DOI: 10.1016/j.elecom.2013.07.016] [Citation(s) in RCA: 30] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/26/2022] Open
|