Facile fabrication of AgNPs/(PVA/PEI) nanofibers: High electrochemical efficiency and durability for biosensors

Label-free electrochemical immunosensor for detection of insulin-like growth factor-1 (IGF-1) using a specific monoclonal receptor on electrospun Zein-based nanofibers/rGO-modified electrode

A novel electrochemical immunosensor was developed for ultrasensitive determination of the hormone insulin-like growth factor 1 (IGF-1) based on immobilization of a specific monoclonal antibody on the electrospun nanofibers of Polyacrylonitrile (PAN)/Zein-reduced graphene oxide (rGO) nanoparticle. The nanofibers deposited on glassy carbon electrode (GCE) showed good electrochemical behaviors with synergistic effects between PAN, Zein, and rGO. PAN/Zein nanofibers were used due to flexibility, high porosity, good mechanical strength, high specific surface area, and flexible structures, while rGO nanoparticles were used to improve the detection sensitivity and anti-IGF-1 immobilizing. Different characterization techniques were applied consisting of FE-SEM, FT-IR, and EDS for the investigation of morphological features and nanofiber size. The redox reactions of [Fe(CN)6]4-/3- on the modified electrode surface were probed for studying the immobilization and determination processes, using differential pulse voltammetry (DPV) and cyclic voltammetry (CV). Under optimal conditions, LOD (limit of detection) and LOQ (limit of quantification) were obtained as 55.72 fg/mL and 185.73 fg/mL respectively, and sensitivity was acquired 136.29 μA/cm2.dec. Moreover, a wide linear range was obtained ranging from 1 pg/mL to 10 ng/mL for IGF-1. Furthermore, the proposed method was applied for the analysis of IGF-1 in several human plasma samples with acceptable results, and it also exhibited high selectivity, stability, and reproducibility.

Detection of receptor tyrosine kinase-orphan receptor-2 using an electrochemical immunosensor modified with electrospun nanofibers comprising polyvinylpyrrolidone, soy, and gold nanoparticles

An electrochemical immunosensing platform was developed for the detection of receptor tyrosine kinase-orphan receptor-2 (ROR2) at a glassy carbon electrode (GCE) modified with the electrospun nanofiber containing polyvinylpyrrolidone (PVP), soy, and Au nanoparticles (AuNPs). The PVP/soy/AuNP nanofiber exhibited good electrochemical behavior due to synergistic effects between PVP, soy, and AuNPs. The PVP/soy in the modified film provided good mechanical strength, high porosity, flexible structures, and high specific surface area. On the other hand, the presence of AuNPs effectively improved conductivity, as well as the immobilization of anti-ROR2 on the modified GCE, leading to enhanced sensitivity. Various characterization approaches such as FE-SEM, FTIR, and EDS were used for investigating the morphological and structural features, and the elemental composition. The designed immunosensor performance was investigated using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and differential pulse voltammetry (DPV). Under optimum conditions with a working potential range from -0.2 to 0.6 V (vs. SCE), sensitivity, linear range (LR), limit of detection (LOD), and correlation coefficient (R2) were acquired at 122.26 μA/cm2 dec, 0.01-1000 pg/mL, 3.39 fg/mL, and 0.9974, respectively. Furthermore, the determination of ROR2 in human plasma samples using the designed immunosensing platform was examined and exhibited satisfactory results including good selectivity against other proteins, reproducibility, and cyclic stability.

Green Synthesized Silver Nanoparticles: A Potential Antibacterial Agent, Antioxidant, and Colorimetric Nanoprobe for the Detection of Hg2+ Ions

Silver nanoparticles (AgNPs) prepared by green synthesis have a lot of potentials in various fields. Among them, as an antioxidant, antibacterial agent, and nanoprobe for the colorimetric detection of mercury (Hg2+) ions is thought to be the most important. The antibacterial, antioxidant, and colorimetric sensing potential of the greenly produced AgNPs utilizing Piper chaba stem extract are all predicted in this investigation. By using the disc diffusion method, the antibacterial activity of greenly produced AgNPs are assessed, and the findings are measured from the zone of inhibition (ZOI). It is revealed that the Staphylococcus aureus, Micrococcus spp., Escherichia coli, and Pseudomonas aeruginosa bacterial strains are significantly resisted by the greenly produced AgNPs. The antioxidant activity test of AgNPs reveals a considerable impact on free radical scavenging having the inhibitory concentration (IC 50) is 1.13 mL (equivalent to 0.45 mg mL-1). Also, with a low limit of detection of 28 ppm, the resulting AgNPs are used as highly selective and economical colorimetric sensors for Hg2+ detection. The study's findings support the hypothesis that Piper chaba stems can serve as a source for the production of AgNPs with high antibacterial and antioxidant activity and usefulness for simple colorimetric readings of Hg2+.

Advancements in Nanofiber-Based Electrochemical Biosensors for Diagnostic Applications

Biosensors are analytical tools that can be used as simple, real-time, and effective devices in clinical diagnosis, food analysis, and environmental monitoring. Nanoscale functional materials possess unique properties such as a large surface-to-volume ratio, making them useful for biomedical diagnostic purposes. Nanoengineering has resulted in the increased use of nanoscale functional materials in biosensors. Various types of nanostructures i.e., 0D, 1D, 2D, and 3D, have been intensively employed to enhance biosensor selectivity, limit of detection, sensitivity, and speed of response time to display results. In particular, carbon nanotubes and nanofibers have been extensively employed in electrochemical biosensors, which have become an interdisciplinary frontier between material science and viral disease detection. This review provides an overview of the current research activities in nanofiber-based electrochemical biosensors for diagnostic purposes. The clinical applications of these nanobiosensors are also highlighted, along with a discussion of the future directions for these materials in diagnostics. The aim of this review is to stimulate a broader interest in developing nanofiber-based electrochemical biosensors and improving their applications in disease diagnosis. In this review, we summarize some of the most recent advances achieved in point of care (PoC) electrochemical biosensor applications, focusing on new materials and modifiers enabling biorecognition that have led to improved sensitivity, specificity, stability, and response time.

Construction of a Silver Nanoparticle Complex and its Application in Cancer Treatment

Nanomedicine has been used in tumor treatment and research due to its advantages of targeting, controlled release and high absorption rate. Silver nanoparticle (AgNPs), with the advantages of small particle size, and large specific surface area, are of great potential value in suppressing and killing cancer cells. Methods: AgNPs–polyethyleneimine (PEI) –folate (FA) (AgNPs–PF) were synthesised and characterised by several analytical techniques. The ovarian cancer cell line Skov3 was used as the cell model to detect the tumor treatment activity of AgNPs, AgNPs–PF and AgNPs+ AgNPs–PF. Results: Results shown that AgNPs–PF were successfully constructed with uniform particle size of 50–70 nm. AgNPs, AgNPs–PF, AgNPs–PF+ AgNPs all showed a certain ability to inhibit cancer cell proliferation, increase reactive oxygen species and decrease the mitochondrial membrane potential. All AgNPs, AgNPs–PF, AgNPs+ AgNPs–PF promoted DNA damage in Skov3 cells, accompanied by the generation of histone RAD51 and γ-H2AX site, and eventually leading to the apoptosis of Skov3 cells. The combination of AgNPs–PF and AgNPs had a more pronounced effect than either material alone. Conclusion: This study is to report that the combination of AgNPs+ AgNPs–PF can cause stronger cytotoxicity and induce significantly greater cell death compared to AgNPs or AgNPs–PF alone in Skov3 cells. Therefore, the combined application of drugs could be the best way to cancer treatment.

Customization of Conductive Elastomer Based on PVA/PEI for Stretchable Sensors

Conductive, stretchable, environmentally-friendly, and strain-sensitive elastomers are attracting immense research interest because of their potential applications in various areas, such as human-machine interfaces, healthcare monitoring, and soft robots. Herein, a binary networked elastomer is reported based on a composite hydrogel of polyvinyl alcohol (PVA) and polyethyleneimine (PEI), which is demonstrated to be ultrastretchable, mechanically robust, biosafe, and antibacterial. The mechanical stretchability and toughness of the hydrogels are optimized by tuning the constituent ratio and water content. The optimal hydrogel (PVA₂ PEI₁ -75) displays an impressive tensile strain as high as 500% with a corresponding tensile stress of 0.6 MPa. Furthermore, the hydrogel elastomer is utilized to fabricate piezoresistive sensors. The as-made strain sensor displays seductive capability to monitor and distinguish multifarious human motions with high accuracy and sensitivity, like facial expressions and vocal signals. Therefore, the elastomer reported in this study holds great potential for sensing applications in the era of the Internet of Things (IoTs).

Synthesis, Characterization and Electrical Conductivity of Silver Doped Polyvinyl Acetate/Graphene Nanocomposites: A Novel Humidity Sensor

In the present study, we have synthesized conducting polymer nanocomposites consist of silver nanoparticles (AgNPs), graphene, and polyvinyl acetate (PVAc) emulsion. The synthesized nanocomposite was characterized by UV/Vis, FT-IR, XRD, TGA, and SEM techniques. SEM images showed that AgNPs and graphene sheets are well dispersed in the PVAc matrix. The electrical conductivities of the nanocomposites were examined using the impedance analyzer instrument. It was ascertained that polymer composite containing silver nanoparticles and graphene exhibit higher conductivities. The PVAc-AgNPs/Graphene nanocomposite was also used as potential conducting materials for humidity measurement.

Co3O4 based non-enzymatic glucose sensor with high sensitivity and reliable stability derived from hollow hierarchical architecture

Inspired by kinetics, the design of hollow hierarchical electrocatalysts through large-scale integration of building blocks is recognized as an effective approach to the achievement of superior electrocatalytic performance. In this work, a hollow, hierarchical Co₃O₄ architecture (Co₃O₄ HHA) was constructed using a coordinated etching and precipitation (CEP) method followed by calcination. The resulting Co₃O₄ HHA electrode exhibited excellent electrocatalytic activity in terms of high sensitivity (839.3 μA mM^-1 cm^-2) and reliable stability in glucose detection. The high sensitivity could be attributed to the large specific surface area (SSA), ample unimpeded penetration diffusion paths and high electron transfer rate originating from the unique two-dimensional (2D) sheet-like character and hollow porous architecture. The hollow hierarchical structure also affords sufficient interspace for accommodation of volume change and structural strain, resulting in enhanced stability. The results indicate that Co₃O₄ HHA could have potential for application in the design of non-enzymatic glucose sensors, and that the construction of hollow hierarchical architecture provides an efficient way to design highly active, stable electrocatalysts.

Electrospun Chitosan-Gelatin Biopolymer Composite Nanofibers for Horseradish Peroxidase Immobilization in a Hydrogen Peroxide Biosensor

A biosensor based on chitosan-gelatin composite biopolymers nanofibers is found to be effective for the immobilization of horseradish peroxidase to detect hydrogen peroxide. The biopolymer nanofibers were fabricated by an electrospining technique. Upon optimization of synthesis parameters, biopolymers nanofibers, an average of 80 nm in diameter, were obtained and were then modified on the working electrode surface. The effects of the concentration of enzyme, pH, and concentration of the buffer and the working potential on the current response of the nanofibers-modified electrode toward hydrogen peroxide were optimized to obtain the maximal current response. The results found that horseradish peroxidase immobilization on chitosan-gelatin composite biopolymer nanofibers had advantages of fast response, excellent reproducibility, high stability, and showed a linear response to hydrogen peroxide in the concentration range from 0.1 to 1.7 mM with a detection limit of 0.05 mM and exhibited high sensitivity of 44 µA∙mM-1∙cm-2. The developed system was evaluated for analysis of disinfectant samples and showed good agreement between the results obtained by the titration method without significant differences at the 0.05 significance level. The proposed strategy based on chitosan-gelatin composite biopolymer nanofibers for the immobilization of enzymes can be extended for the development of other enzyme-based biosensors.

Recent Advances in Electrospun Nanofiber Interfaces for Biosensing Devices

Electrospinning has emerged as a very powerful method combining efficiency, versatility and low cost to elaborate scalable ordered and complex nanofibrous assemblies from a rich variety of polymers. Electrospun nanofibers have demonstrated high potential for a wide spectrum of applications, including drug delivery, tissue engineering, energy conversion and storage, or physical and chemical sensors. The number of works related to biosensing devices integrating electrospun nanofibers has also increased substantially over the last decade. This review provides an overview of the current research activities and new trends in the field. Retaining the bioreceptor functionality is one of the main challenges associated with the production of nanofiber-based biosensing interfaces. The bioreceptors can be immobilized using various strategies, depending on the physical and chemical characteristics of both bioreceptors and nanofiber scaffolds, and on their interfacial interactions. The production of nanobiocomposites constituted by carbon, metal oxide or polymer electrospun nanofibers integrating bioreceptors and conductive nanomaterials (e.g., carbon nanotubes, metal nanoparticles) has been one of the major trends in the last few years. The use of electrospun nanofibers in ELISA-type bioassays, lab-on-a-chip and paper-based point-of-care devices is also highly promising. After a short and general description of electrospinning process, the different strategies to produce electrospun nanofiber biosensing interfaces are discussed.

Electrospinning design of functional nanostructures for biosensor applications

We summarize the recent advances in the electrospinning fabrication of hybrid polymer nanofibers decorated with functionalized nanoscale building blocks (NBBs) to obtain biosensors with better performances.

Fabrication of ascorbyl palmitate loaded poly(caprolactone)/silver nanoparticle embedded poly(vinyl alcohol) hybrid nanofibre mats as active wound dressings via dual-spinneret electrospinning

AP loaded PCL/AgNP embedded PVA hybrid nanofibre mats were prepared through dual-spinneret electrospinning, which altogether contributed to wound healing.

Graphene oxide directed in-situ deposition of electroactive silver nanoparticles and its electrochemical sensing application for DNA analysis

The development of high-performance biosensing platform is heavily dependent on the recognition property of the sensing layer and the output intensity of the signal probe. Herein, we present a simple and highly sensitive biosensing interface for DNA detection on the basis of graphene oxide nanosheets (GONs) directed in-situ deposition of silver nanoparticles (AgNPs). The fabrication process and electrochemical properties of the biosensing interface were probed by electrochemical techniques and scanning electron microscopy. The results indicate that GONs can specifically adsorb at the single-stranded DNA probe surface, and induces the deposition of highly electroactive AgNPs. Upon hybridization with complementary oligonucleotides to generate the duplex DNA on the electrode surface, the GONs with the deposited AgNPs will be liberated from the sensing interface due to the inferior affinity of GONs and duplex DNA, resulting in the reduction of the electrochemical signal. Such a strategy combines the superior recognition of GONs toward single-stranded DNA and double-stranded DNA, and the strong electrochemical response of in-situ deposited AgNPs. Under optimal conditions, the biosensor can detect target DNA over a wide range from 10 fM to 10 nM with a detection limit of 7.6 fM. Also, the developed biosensor shows outstanding discriminating ability toward oligonucleotides with different mismatching degrees.

Hydrogen-bond-mediated in situ fabrication of AgNPs/agar/PAN electrospun nanofibers as reproducible SERS substrates

Reproducibility in surface enhanced Raman scattering (SERS) measurements is a challenge. This work developed a facile way to make highly dispersed uniform silver nanoparticles (AgNPs) loaded in the agar/polyacrylonitrile (PAN) nanofibers by the coupling the electrospinning technology from metal complex-containing polymer solution and in situ photoreductive technique. Agar, as hydrophilic component, was introduced into the electrospinning solution considering that its abundant hydroxyl group sites could greatly improve the contents of silver ions in the polymers because of the rich silver ion chelated with the hydroxyl group, whereas hydrophilic agar was integrated with hydrophobic PAN by -OH···N≡C- hydrogen bonds as a bridge. Meanwhile, the in situ photoreductive reaction was made under different light irradiations such as desk lamp, 365 nm UV-lamp, and 254 nm UV-lamp. High yield of stable AgNPs with highly uniform and dispersion are available in the agar/PAN nanofibers after the in situ photoreductive reaction, supplying the possibility of reproducible SERS signals. To identify that concept of proof, a facile approach for the determination of malachite green (MG) in three environmental practical samples was demonstrated by using the composite nanofibrous material irradiated by 365 nm UV-lamp, giving the minimum detection concentration of MG as low as 0.1 μmol/L with a good linear response ranging from 0.1-100 μmol/L (R(2) = 0.9960).

Facile and green fabrication of electrospun poly(vinyl alcohol) nanofibrous mats doped with narrowly dispersed silver nanoparticles

Submicrometer-scale poly(vinyl alcohol) (PVA) nanofibrous mats loaded with aligned and narrowly dispersed silver nanoparticles (AgNPs) are obtained via the electrospinning process from pure water. This facile and green procedure did not need any other chemicals or organic solvents. The doped AgNPs are narrowly distributed, 4.3±0.7 nm and their contents on the nanofabric mats can be easily tuned via in situ ultraviolet light irradiation or under preheating conditions, but with different particle sizes and size distributions. The morphology, loading concentrations, and dispersities of AgNPs embedded within PVA nanofiber mats are characterized by transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, ultraviolet-visible spectra, X-ray photoelectron spectroscopy, and X-ray diffraction, respectively. Moreover, the biocidal activities and cytotoxicity of the electrospun nanofiber mats are determined by zone of inhibition, dynamic shaking method, and cell counting kit (CCK)-8 assay tests.