High loading Pt nanoparticles on functionalization of carbon nanotubes for fabricating nonenzyme hydrogen peroxide sensor

A ferrocene-based hydrogel as flexible electrochemical biosensor for oxidative stress detection and antioxidation treatment

Real-time sensing of reactive oxygen species (ROS) and timely scavenging of excessive ROS in physiological environments are critically important in the diagnosis and prevention of ROS-related diseases. To solve the mismatch problem between conventional rigid ROS biosensors and biological tissues in terms of both modulus and composition, here, we present a flexible ferrocene-based hydrogel biosensor designed for oxidative stress detection and antioxidation treatment. The hydrogel was fabricated through a supramolecular assembly of ferrocene-grafted polyethylenimine (PEI-Fc), sodium alginate (SA), and polyvinyl alcohol (PVA). Multiple non-covalent interactions, including electrostatic interactions between PEI-Fc and SA, hydrophobic interactions and π-π stacking among ferrocene groups, and the PVA crystalline domain, synergistically improve the mechanical properties of the PVA/SA/PEI-Fc hydrogel. The flexible PVA/SA/PEI-Fc hydrogel biosensor exhibited a broad detection range for hydrogen peroxide (H2O2), from 0 to 120 μM, using the differential pulse voltammetry method. Furthermore, the hydrogel demonstrated effective ROS scavenging and oxygen generation performance, desirable biocompatibility, and satisfactory antibacterial activity, making it suitable for biological interfaces. In vitro studies revealed that the PVA/SA/PEI-Fc hydrogel could monitor H2O2 concentration in the proximity of inflammatory cells, and effectively scavenge ROS to protect cells from oxidative stress damage. This all-in-one multifunctional hydrogel, integrating both sensing and treatment functions, holds great promise for clinical applications in the diagnosis and management of ROS-related diseases.

Electrochemical Sensors for the Detection of Reactive Oxygen Species in Biological Systems: A Critical Review

Reactive oxygen species (ROS) involving superoxide anion, hydrogen peroxide and hydroxyl radical play important role in human health. ROS are known to be the markers of oxidative stress associated with different pathologies including neurodegenerative and cardiovascular diseases, as well as cancer. Accordingly, ROS level detection in biological systems is an essential problem for biomedical and analytical research. Electrochemical methods seem to have promising prospects in ROS determination due to their high sensitivity, rapidity, and simple equipment. This review demonstrates application of modern electrochemical sensors for ROS detection in biological objects (e.g., cell lines and body fluids) over a decade between 2011 and 2021. Particular attention is paid to sensors materials and various types of modifiers for ROS selective detection. Moreover, the sensors comparative characteristics, their main advantages, disadvantages and their possibilities and limitations are discussed.

Synthesis of SDS-Modified Pt/Ti3C2Tx Nanocomposite Catalysts and Electrochemical Performance for Ethanol Oxidation

It is well-known that platinum (Pt) is still the preferred material of anode catalyst in ethanol oxidation, however, the prohibitive high cost and CO poisoning of Pt metal impede the commercialization of fuel cells. Therefore, improving the utilization rate of catalysts and reduce the cost of catalyst become one of the most concerned focus in the construction of fuel cells. In this work, the Pt-based catalysts are synthesized by using different content of sodium dodecyl sulfate (SDS) modified-Ti₃C₂T_x support, and the dispersion regulation function of SDS modified-Ti₃C₂T_x supported on Pt nanoparticles is investigated. The structure, composition and morphology of different catalysts are characterized by X-ray diffraction (XRD), X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and high-resolution TEM, respectively. It is found that the Pt nanoparticles in pure Ti₃C₂T_x surface are serious aggregated and show poor dispersion, whereas the Pt nanoparticles in SDS modified-Ti₃C₂T_x have a better dispersion. The electrochemical results revealed that SDS modified-Ti₃C₂T_x supported Pt nanoparticles has higher electrocatalytic activity and stability in both acidic and alkaline ethanol oxidation when the dosage of SDS increases to 100 mg. These findings indicate that the SDS-Ti₃C₂T_x/Pt catalysts show a promising future of potential applications in fuel cells with modification of Ti₃C₂T_x support.

Synthesis of a hierarchically structured Fe3O4–PEI nanocomposite for the highly sensitive electrochemical determination of bisphenol A in real samples

In this work, a novel, highly sensitive and cost-effective sensing electrode was fabricated for the sensitive detection of bisphenol A in milk and water samples.

Organic Electrochemical Transistor for in Situ Detection of H2O2 Released from Adherent Cells and Its Application in Evaluating the In Vitro Cytotoxicity of Nanomaterial

Detection of hydrogen peroxide (H₂O₂) produced by living cells is very significant to fully understand its roles in cellular physiology, as well as providing reliable diagnosis of pathological conditions. However, in situ detection of H₂O₂ released from adherent cells in cellular culture medium is still insufficiently achieved. Here, we report an electrochemical platform for in situ detection of H₂O₂ produced by adherent cells in cellular culture medium. It is based on the use of organic electrochemical transistor (OECT) fabricated on a flexible poly(ethylene terephthalate) substrate and Transwell support. A screen-printed carbon paste electrode was modified with carbon nanotubes and platinum nanoparticles and served as the gate of the device. Under optimal conditions, this device exhibits good modulation and sensitivity. It works in the 0.5 μM to 0.1 mM H₂O₂ concentration range and has a 0.2 μM detection limit. The cells were seeded and grew on the Transwell membrane. Upon being stimulated by N-formylmethionyl-leucyl-phenylalanine peptide, H₂O₂ produced by the adherent cells diffused into the bottom chamber of the Transwell and was in situ detected by OECT. Moreover, evaluating in vitro cytotoxicity of the nanomaterial using the OECT-Transwell platform was realized. This simple electrochemical platform would be of great interest for in vitro cytotoxicity, cellular physiology study, and diagnosis of pathological conditions.

Synthesis, Characterization, and Biomedical Applications of an Alkylated Quercetin-Gadolinium Complex

Flavonoids and their derivatives have been extensively studied for their pharmaceutical applications due to their antioxidant and anti-inflammatory properties. The coordination complexes of several flavonoids have demonstrated DNA binding ability that can confer anticancer properties. The structure of the flavonoid has a pronounced influence on its pharmacological properties. Herein we report the synthesis and characterization of alkylated quercetin and its complex with gadolinium. The structure of the complex was confirmed using spectroscopic techniques. The ability of the gadolinium-alkylated quercetin complex to serve as a magnetic contrast agent was compared with gadolinium-quercetin complex. The quercetin-gadolinium complex was found to exhibit better contrast property with a relaxivity of 0.2952 μg mL^-1 s^-1 when compared to the gadolinium complex of alkylated quercetin. This difference primarily arises due to the greater hydrophobicity of the alkylated quercetin complex that restricts access of water. However, the alkylated quercetin was found to exhibit better enzyme mimic activity as the metal ion served as a redox center that enabled quantification of hydrogen peroxide in the concentration range 50-450 μM within 5 s with a sensitivity of 64 nA/μM and limit of detection of 7.3 μM. The better sensing performance of the alkylated quercetin-gadolinium complex, reported here for the first time, when compared to quercetin-gadolinium complex can be attributed to the enhanced electroactive area on the working electrode.

Recent uses of carbon nanotubes & gold nanoparticles in electrochemistry with application in biosensing: A review

The innovation of nanoparticles assumes a critical part of encouraging and giving open doors and conceivable outcomes to the headway of new era devices utilized as a part of biosensing. The focused on the quick and legitimate detecting of specific biomolecules using functionalized gold nanoparticles (Au NPs), and carbon nanotubes (CNTs) has turned into a noteworthy research enthusiasm for the most recent decade. Sensors created with gold nanoparticles or carbon nanotubes or in some cases by utilizing both are relied upon to change the very establishments of detecting and distinguishing various analytes. In this review, we will examine the current utilization of functionalized AuNPs and CNTs with other synthetic mixes for the creation of biosensor prompting to the location of particular analytes with low discovery cutoff and quick reaction.

Electrochemical nonenzymatic sensing of glucose using advanced nanomaterials

An overview (with 376 refs.) is given here on the current state of methods for electrochemical sensing of glucose based on the use of advanced nanomaterials. An introduction into the field covers aspects of enzyme based sensing versus nonenzymatic sensing using nanomaterials. The next chapter cover the most commonly used nanomaterials for use in such sensors, with sections on uses of noble metals, transition metals, metal oxides, metal hydroxides, and metal sulfides, on bimetallic nanoparticles and alloys, and on other composites. A further section treats electrodes based on the use of carbon nanomaterials (with subsections on carbon nanotubes, on graphene, graphene oxide and carbon dots, and on other carbonaceous nanomaterials. The mechanisms for electro-catalysis are also discussed, and several Tables are given where the performance of sensors is being compared. Finally, the review addresses merits and limitations (such as the frequent need for working in strongly etching alkaline solutions and the need for diluting samples because sensors often have analytical ranges that are far below the glucose levels found in blood). We also address market/technology gaps in comparison to commercially available enzymatic sensors. Graphical Abstract Schematic representation of electrochemical nonenzymatic glucose sensing on the nanomaterials modified electrodes. At an applied potential, the nanomaterial-modified electrodes exhibit excellent electrocatalytic activity for direct oxidation of glucose oxidation.

Construction of an ultrasensitive non-enzymatic sensor to investigate the dynamic process of superoxide anion release from living cells

In this work, a novel non-enzymatic superoxide anion (O₂•^-) sensor was constructed based on Ag nanoparticles (NPs) / poly (amidoamine) (PAMAM) dendrimers and used to investigate the dynamic process of O₂•^- release from living cells. The AgNPs/PAMAM nanohybrids were characterized by transmission electron microscopy (TEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The fabricated electrode exhibited excellent catalytic activity toward the reaction of O₂•^- with a super low detection limit (LOD) of 2.530 × 10^-13M (S/N = 3) and wide linear range of 8 orders of magnitude. It could fulfill the requirement of real-time measurement O₂•^- released from living cells. Furthermore, zymosan was chosen as the stimulant to induce O₂•^- generation from cancer cells (rat adrenal medulla pheochromocytoma cell (PC12)). The electrochemical experiment results indicated that the levels of intracellular O₂•^- depended on the amount of Zymosan. A large amount of O₂•^- generated in the living cells by added heavy stimulant could damage cells seriously. More importantly, a vitro simulation experiment confirmed the role of superoxide dismutase (SOD) for the first time because it could maintain the O₂•^- concentration at a normal physiological range. These findings are of great significance for evaluating the metabolic processes of O₂•^- in the biological system, and this work has the tremendous potential application in clinical diagnostics to assess oxidative stress.

Electrochemical hydrogen peroxide sensor based on carbon supported Cu@Pt core-shell nanoparticles

The Cu@Pt/C nanocomposites have been synthesized via two-step reduction method. Electrochemical observations showed that the Cu@Pt/C had better electrocatalytic activity for the reduction of hydrogen peroxide than Pt/C, with a wide linear range between 0.50μM and 32.56mM, a high sensitivity of 351.3μAmM^-1cm^-2, and a low detection limit of 0.15μM (signal/noise=3). Furthermore, the sensor based on Cu@Pt/C has potential applications due to its excellent long-time stability, good reproducibility and acceptable selectivity.

Synergetic signal amplification of multi-walled carbon nanotubes-Fe3O4 hybrid and trimethyloctadecylammonium bromide as a highly sensitive detection platform for tetrabromobisphenol A

In this work, we fabricated an electrochemical sensor based on trimethyloctadecylammonium bromide and multi-walled carbon nanotubes-Fe₃O₄ hybrid (TOAB/MWCNTs-Fe₃O₄) for sensitive detection of tetrabromobisphenol A (TBBPA). The nanocomposite was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR) techniques. The electrochemical behaviors of TBBPA on TOAB/MWCNTs-Fe₃O₄ composite film modified glassy carbon electrode (GCE) were investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) method. The experimental results indicated that the incorporation of MWCNTs-Fe₃O₄ with TOAB greatly enhanced the electrochemical response of TBBPA. This fabricated sensor displayed excellent analytical performance for TBBPA detection over a range from 3.0 nM to 1000.0 nM with a detection limit of 0.73 nM (S/N = 3). Moreover, the proposed electrochemical sensor exhibited good reproducibility and stability, and could be successfully applied to detect TBBPA in water samples with satisfactory results.

Constructing a novel 8-hydroxy-2'-deoxyguanosine electrochemical sensor and application in evaluating the oxidative damages of DNA and guanine

8-Hydroxy-2'-deoxyguanosine (8-OHdG) is commonly identified as a biomarker of oxidative DNA damage. In this work, a novel and facile 8-OHdG sensor was developed based on the multi-walled carbon nanotubes (MWCNTs) modified glassy carbon electrode (GCE). It exhibited good electrochemical responses toward the oxidation of 8-OHdG, and the linear ranges were 5.63×10(-8)-6.08×10(-6)M and 6.08×10(-6)-1.64×10(-5)M, with the detection limit of 1.88×10(-8)M (S/N=3). Moreover, the fabricated sensor was applied for the determination of 8-OHdG generated from damaged DNA and guanine, respectively, and the oxidation currents of 8-OHdG increased along with the damaged DNA and guanine within certain concentrations. These results could be used to evaluate the DNA damage, and provide useful information on diagnosing diseases caused by mutation and deficiency of the immunity system.

Graphene and tricobalt tetraoxide nanoparticles based biosensor for electrochemical glutamate sensing

An amperometric biosensor based on tricobalt tetraoxide nanoparticles (Co₃O₄), graphene (GR), and chitosan (CS) nanocomposite modified glassy carbon electrode (GCE) for sensitive determination of glutamate was fabricated. Scanning electron microscopy was implemented to characterize morphology of the nanocomposite. The biosensor showed optimum response within 25 s at pH 7.5 and 37 °C, at +0.70 V. The linear working range of biosensor for glutamate was from 4.0 × 10^-6 to 6.0 × 10^-4 M with a detection limit of 2.0 × 10^-6 M and sensitivity of 0.73 μA/mM or 7.37 μA/mMcm². The relatively low Michaelis-Menten constant (1.09 mM) suggested enhanced enzyme affinity to glutamate. The glutamate biosensor lost 45% of its initial activity after three weeks.

Recent advances in graphene-based nanomaterials for fabricating electrochemical hydrogen peroxide sensors

Due to the large specific surface area, extraordinary mechanical flexibility, chemical stability, and superior electrical and thermal conductivities, graphene (G)-based materials have recently opened up an exciting field in the science and technology of two-dimensional (2D) nanomaterials with continuously growing academic and technological impetus. In the past several years, graphene-based materials have been well designed, synthesized, and investigated for sensing applications. In this review, we discuss the synthesis and application of graphene-based 2D nanomaterials for the fabrication of hydrogen peroxide (H₂O₂) electrochemical sensors. In particular, graphene-based nanomaterials as immobilization matrix of heme proteins for the fabrication of enzymatic H₂O₂ electrochemical biosensors is first summarized. Then, the application of graphene-based electrocatalysts (metal-free, noble-metals and non-noble metals) in constructing non-enzymatic H₂O₂ electrochemical sensors is discussed in detail. We hope that this review is helpful to push forward the advancement of this academic issue (189 references).

Preparation of polyoxometalate stabilized gold nanoparticles and composite assembly with graphene oxide: enhanced electrocatalytic performance

P₅W₃₀ stabilized Au nanoparticles and graphene oxide were fabricated to form composite films exhibiting good electrocatalytic activity for H₂O₂ reduction.

PdCo alloy nanoparticle-embedded carbon nanofiber for ultrasensitive nonenzymatic detection of hydrogen peroxide and nitrite

PdCo alloy nanoparticle-embedded carbon nanofiber (PdCo/CNF) prepared by electrospinning and thermal treatment was employed as a high-performance platform for the determination of hydrogen peroxide and nitrite. The as-obtained PdCo/CNF were characterized by transmission electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction. Electrochemical impedance spectroscopy, cyclic voltammetry and differential pulse voltammetry were employed to investigate the electrochemical behaviors of the resultant biosensor. The proposed PdCo/CNF-based biosensor showed excellent analytical performances toward hydrogen peroxide (detection limit: 0.1 μM; linear range: 0.2 μM-23.5 mM) and nitrite (detection limit: 0.2 μM; linear range: 0.4-30 μM and 30-400 μM). The superior analytical properties could be attributed to the synergic effect and firmly embedment of well-dispersed PdCo alloy nanoparticles. These attractive electrochemical properties make this robust electrode material promising for the development of effective electrochemical sensors.

Real-time monitoring of H2O2 release from single cells using nanoporous gold microelectrodes decorated with platinum nanoparticles

We present a self-supported nanoporous gold/PtNPs microelectrode with the sub-nanomolar sensitivity to detect H₂O₂ release from single cells.

Hierarchical polystyrene@reduced graphene oxide–Pt core–shell microspheres for non-enzymatic detection of hydrogen peroxide

A non-enzymatic electrochemical sensor based on polystyrene@reduced graphene oxide (RGO)–Pt core–shell microspheres was developed for sensitive detection of hydrogen peroxide (H₂O₂).

A ternary nanocomposite electrode of polyoxometalate/carbon nanotubes/gold nanoparticles for electrochemical detection of hydrogen peroxide

In this work, a nanocomposite film electrode containing polyoxometalate (POM) clusters K₆P₂W₁₈O₆₂ (P₂W₁₈), carbon nanotubes (CNTs) and Au nanoparticles (AuNPs) was fabricated by a layer-by-layer self-assembly technique.

A novel electrochemical hydrogen peroxide biosensor based on hemoglobin capped gold nanoclusters–chitosan composite

In this work, the first direct electrochemistry of Hb-AuNCs and its electrocatalysis towards H₂O₂ in a biosensing system has been reported.