Fluorescent carbon nanoparticles for the fluorescent detection of metal ions

Engineered microbubbles decorated with red emitting carbon nanoparticles for efficient delivery and imaging

Altering the route of uptake by the cells is an attractive strategy to overcome drug-receptor adaptation problems. Carbon nanoparticles (CNPs) with emission beyond tissue autofluorescence for imaging biological tissues were used to study the phenomenon of uptake by the cells. In this regard, red-emitting carbon nanoparticles (CNPs) were synthesized and incorporated onto lipid microbubbles (MBs). The CNPs showed red emissions in the range of 640 nm upon excitation with 480 nm wavelength of light. Atomic force microscopic and confocal microscopic images showed the successful loading of CNPs onto the MB. Carbon nanoparticle loaded microbubbles (CNP-MBs) were treated with NIH 3 T3 cells at different concentrations. Confocal microscopic imaging studies confirm the presence of CNPs inside the treated cells. Cytotoxicity studies revealed that the CNPs showed minimal toxicity towards cells after loading onto MBs. The CNPs are usually taken up by the cells through the clathrin-mediated (CME) pathway, but when loaded onto MBs, the mechanism of uptake of CNPs is altered, and the uptake by the cells was observed even in the presence of inhibitors for the CME pathway. Loading CNPs onto MBs resulted in the uptake of CNPs by the cell through micropinocytosis and sonophoresis in the presence of ultrasound. The in vivo uptake CNP-MBs were performed in Danio rerio (Zebrafish larvae). This study provides insights into altering the uptake pathway through reformulation by loading nanoparticles onto MBs.

A highly sensitive and selective fluorescent biosensor for breast cancer derived exosomes using click reaction of azide-CD63 aptamer and alkyne-polymer dots

Exosomes have gained recognition as valuable reservoirs of biomarkers, holding immense potential for early cancer detection. Consequently, there is a pressing need for the development of an economical and highly sensitive exosome detection methodology. In this work, we present a fluorescence method for breast cancer-derived exosome detection based on Cu-triggered click reaction of azide-modified CD63 aptamer and alkyne functionalized Pdots. The detection threshold for the exosomes obtained from the breast cancer serum was determined to be 6.09 × 107 particles per μL, while the measurable range spanned from 6.50 × 107 to 1.30 × 109 particles per μL. The employed methodology achieved notable success in accurately distinguishing breast cancer patients from healthy individuals through serum analysis. The application of this method showcases the significant potential for early exosome analysis in the clinical diagnosis of breast cancer patients.

Carbon quantum dots of ginsenoside Rb1 for application in a mouse model of intracerebral Hemorrhage

After intracerebral hemorrhage (ICH) occurs, the overproduction of reactive oxygen species (ROS) and iron ion overload are the leading causes of secondary damage. Removing excess iron ions and ROS in the meningeal system can effectively alleviate the secondary damage after ICH. This study synthesized ginsenoside Rb1 carbon quantum dots (RBCQDs) using ginsenoside Rb1 and ethylenediamine via a hydrothermal method. RBCQDs exhibit potent capabilities in scavenging ABTS + free radicals and iron ions in solution. After intrathecal injection, the distribution of RBCQDs is predominantly localized in the subarachnoid space. RBCQDs can eliminate ROS and chelate iron ions within the meningeal system. Treatment with RBCQDs significantly improves blood flow in the meningeal system, effectively protecting dying neurons, improving neurological function, and providing a new therapeutic approach for the clinical treatment of ICH.

A comprehensive exploration of tartrazine detection in food products: Leveraging fluorescence nanomaterials and electrochemical sensors: Recent progress and future trends

Azo dyes are widely used as food coloring agents because of their affordability and stability. Examples include brilliant blue, carmoisine, sunset yellow, allura red, and tartrazine (Tar), etc. Notably, Tar is often utilized in hazardous food goods. They are frequently flavoured and combined with food items, raising the likelihood and danger of exposure. Therefore, detecting Tar in food is crucial to prevent health risks. Fluorescence nanomaterials and electrochemical sensors, known for their high sensitivity, affordability, simplicity, and speed, have been widely adopted by researchers for Tar detection. This comprehensive paper delves into the detection of Tar in food products. It extensively covers the utilization of advanced carbon-based nanomaterials, including CDs, doped CDs, and functionalized CDs, for sensitive Tar detection. Additionally, the paper explores the application of electrochemical sensors. The paper concludes by addressing current challenges and prospects, emphasizing efforts to enhance sensitivity, and selectivity for improved food safety.

A Ratio Fluorescence Method Based on Dual Emissive Copper Nanoclusters for the Detection of Vanillin

In this study, a novel double-emission fluorescence probe at 340 and 400 nm was synthesized by one-pot method using phenylalanine (Phe) and ascorbic acid (AA) as stabilizing and reducing agents. It was found that the fluorescence intensity of the probe at 400 nm could be controlled by controlling the temperature within a certain range, and the ratio of double-emission fluorescence probe could be further regulated. Under the optimal conditions, the fluorescence intensity at 340 nm decreased significantly, while it only showed a slight decrease at 400 nm, which constituted the ratio fluorescence probe. The synthesized fluorescence probe showed good linearity in the range of 0.2-32 μM, and its detection limit was 63.4 nM. Moreover, the method was successfully employed to determine VA in vanilla drink and perfumes, and corresponding results were consistent with those of HPLC.

Readily soluble cellulose-based fluorescent probes for the detection and removal of Fe3+ ion

Cellulose is an economical, biodegradable, widely available, and eco-friendly natural macromolecule. But its utilization has been restricted due to its insolubility in water and common organic solvents. In this work, soluble fluorescent probes based on cellulose were synthesized. Firstly, the primary hydroxyl group in glucose units was reacted with SOCl2 to introduce Cl and obtain chloro-cellulose (Cell-Cl). This operation breaks down the regular structure and hydrogen bonding of the original cellulose, enabling it to dissolve in DMSO. Secondly, the Cell-Cl reacted with CS2 and 2-mercaptobenzothiazole to obtain a cellulose-based macromolecular RAFT reagent (Cell-CTA). Finally, the fluorescent monomers which bears -C=C- and naphthalimide, and methacrylic acid (MAA) were grafted onto the main chain of cellulose through RAFT polymerization. Thus, cellulose-based readily soluble macromolecular fluorescent probes were obtained. The cellulose-based probes can specifically recognize Fe3+ in pure water and can be recycled and regenerated. Additionally, the cellulose-based probes exhibit remarkable adsorption and separation properties for Fe3+ ions. The modification of cellulose decreases its crystallinity and introduces hydrophilic groups and fluorophores, which enables cellulose to be soluble in both pure water and the organic solvent DMSO. This work expands the application range of cellulose-based copolymers.

Carbon nanoprobe derived from Nyctanthes arbor-tristis flower: Unveiling the surface defect-derived fluorescence

Dual Emissive (green and blue) Carbon dots (C-Dots) aka g-CD and b-CD were synthesized using flowers of Nyctanthes arbortristis as the sole precursor via hydrothermal method without the aid of any external passivating agent. In the present report, the effect of time and temperature on the hydrothermal reaction was evaluated in order to modulate the surface defects that could lead to dual emissions. To gauge the nature, size, morphology, and optoelectronic characteristics, the C-Dots were characterized using high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), UV-Vis spectroscopy and Fluorescence spectroscopy. The fluorescence studies of both the Carbon Dots revealed their excitation-dependent emission characteristics with the bathochromic shift. Furthermore, both g-CD and b-CD could effectively be utilized as efficient fluorescent probes for the selective and sensitive detection of Fe3+. These fluorescent nanoprobes could selectively detect Fe3+ over a wide range of concentrations (3 µM to 100 µM) with limit of detection (LOD) as low as 0.06 µM and 0.70 µM respectively. These tuneable Carbon Dots having wider solubilities would open a new avenue as Nanosensors for real-time applications.

Quantum dots: a tool for the detection of explosives/nitro derivatives

Nitro derivatives are considered as major environmental pollutants and issues of health concern. In current times, a variety of methods and techniques have been utilized for the sensing of these nitro derivatives. In view of this, the remarkable fluorescence properties of quantum dots (QDs) provide a great opportunity to detect these nitro derivatives. This review highlighted the recent reports of QDs as the sensing material for these nitro derivative explosives. Different modifications in QDs using physical and chemical approaches can be used to improve their sensing output. Various interaction mechanisms have been discussed between QDs and nitro derivatives to change their fluorescence properties. Finally, the current challenges and the perspective for the forthcoming future are provided in the concluding section. We hope this review will be beneficial in guiding the utilization of QDs in sensing applications.

Simultaneous detection of As(III/V), Cr(III/VI), and Fe(II/III) by a sensor array based on the morphology regulation of CeO2 oxidase

To develop a convenient method for simultaneous detection of As(III/V), Cr(III/VI), and Fe(II/III), three morphologies of CeO2 oxidase have been prepared. Based on the difference in oxidase activity and binding ability with substrate TMB of CeO2 of different morphologies, a 3 (Signal unit) × 6 (Target number) × 5 (Repetition) sensor array was constructed to realize simultaneous detection of six variable valence metal ions As(III/V), Cr(III/VI), and Fe(II/III). The lowest detection limit of the array for metal ions was 1.68 µg/L. The analysis of environmental samples with multiple metal ions (binary and ternary mixtures) co-existing has confirmed that the sensor array can achieve simultaneous qualitative and quantitative results for composite samples. This study not only revealed the influencing factors of crystal morphology regulation on oxidase activity, but also provided a scheme for the morphology detection of easily convertible metal ions in the field through the construction of the sensor array.

Low Cu(II) Concentration Detection Based on Fluorescent Detector Made from Citric Acid and Urea

Carbon quantum dots (CQD) are an advanced fluorescent material, which has attracted more and more attention in theoretical research and practical applications. To obtain stable CQDs with high fluorescence characteristics for detecting trace metal ions in water, nitrogen-doped carbon quantum dots (N-CQDs) based fluorescent sensors were synthesized by the hydrothermal method, using citric acid and urea as source. Transmission electron microscopy (TEM) images showed that the synthesized N-CQDs maintained a narrow particle size distribution bellow 10 nm, and its average size was 3.07 nm. Fourier transform infrared spectroscopy (FT-IR) indicated that abundant hydroxyl and carboxyl functional groups existed on N-CQDs surface, which helped N-CQDs highly disperse in water. In addition, UV-vis spectroscopy and photoluminescence demonstrated that the N-CQDs obtained a 10.27% of quantum yield (QY) with relatively high and stable fluorescence performance. As a fluorescent sensor, the N-CQDs showed a fluorescence "ON-OFF" mechanism during the Cu2+ detection, which was induced from the electrons transition in surface functional groups. The final N-CQDs exhibited a wide linear relationship between fluorescence response and concentration of Cu2+ in range of 0.3-0.7 μM with a detection limit of 0.071 μM. Furthermore, the detection of Cu2+ in the simulating surface water (by adding interfering metal ions in purified water) and the tap water (from municipal water in Beijing) were used to verify N-CQDs practical application.

Turning food waste into value-added carbon dots for sustainable food packaging application: A review

Carbon dots (CDs) are a recent addition to the nanocarbon family, encompassing both crystalline and amorphous phases. They have sparked significant research interest due to their unique electrical and optical properties, remarkable biocompatibility, outstanding mechanical characteristics, customizable surface chemistry, and negligible cytotoxicity. Their current applications are mainly limited to flexible photonic and biomedical devices, but they have also garnered attention for their potential use in intelligent packaging. The conversion of food waste into CDs further contributes to the concept of the circular economy. It provides a comprehensive overview of emerging green technologies, energy-saving reactions, and cost-effective starting materials involved in the synthesis of CDs. It also highlights the unique properties of biomass-derived CDs, focusing on their structural performance, cellular toxicity, and functional characteristics. The application of CDs in the food industry, including food packaging, is summarized in a concise manner. This paper sheds light on the current challenges and prospects of utilizing CDs in the packaging industry. It aims to provide researchers with a roadmap to tailor the properties of CDs to suit specific applications in the food industry, particularly in food packaging.

Fluorescence Sensing Mechanisms of Versatile Graphene Quantum Dots toward Commonly Encountered Heavy Metal Ions

Graphene quantum dots (GQDs) have received tremendous attention as fluorescent probes for detection of diverse heavy metal ions (HMIs). Nevertheless, the fluorescence sensing mechanisms of versatile GQDs with respect to different HMIs remain elusive. Herein, the fluorescence sensing behaviors and mechanisms of GQDs with amino and carboxyl groups toward commonly encountered Cr6+, Fe3+, Cu2+, Cr3+, Mn2+, Co2+, Ni2+, Zn2+, Cd2+, and Hg2+ under different pH conditions are systemically explored. The results show that the fluorescence of GQDs can be enhanced by Zn2+/Cd2+ and quenched by other HMIs at pH 5.8, while it can be enhanced by HMIs except Cr6+/Fe3+/Cu2+ at pH 2.0. Systematic studies verify that the fluorescence quenching/enhancing is mediated by the synergistic effect of the inner filter effect (IFE) and the photoinduced electron transfer (PET) or metal orbital-controlled chelation-quenched/enhanced fluorescence (CHQF/CHEF) effect. The strong and weak IFEs of Cr6+/Fe3+ and Cr3+/Cu2+, respectively, are one of the reasons for the fluorescence quenching, while other HMIs have no IFE. Moreover, the PET effect caused by the interaction of GQDs with Hg2+ at pH 5.8 and the CHQF/CHEF effect caused by the interaction of GQDs with other HMIs are also crucial for fluorescence quenching/enhancing. The findings suggest that the pH condition, the existing forms of functional groups on GQDs, and the complexation states of HMIs in aqueous systems dominate the PET and CHQF/CHEF effects. The elucidating of the fluorescence sensing mechanisms of GQDs toward different HMIs paves the way for developing versatile sensing platforms for monitoring of HMI contamination.

Assessment of biomass-derived carbon dots as highly sensitive and selective templates for the sensing of hazardous ions

Access to safe drinking water and a hygienic living environment are the basic necessities that encourage healthy living. However, the presence of various pollutants (especially toxic heavy metal ions) at high concentrations in water renders water unfit for drinking and domestic use. The presence of high concentrations of heavy-metal ions (e.g., Pb2+, Hg2+, Cr6+, Cd2+, or Cu2+) greater than their permissible limits adversely affects human health, and increases the risk of cancer of the kidneys, liver, skin, and central nervous system. Therefore, their detection in water is crucial. Due to the various benefits of "green"-synthesized carbon-dots (C-dots) over other materials, these materials are potential candidates for sensing of toxic heavy-metal ions in water sources. C-dots are very small carbon-based nanomaterials that show chemical stability, magnificent biocompatibility, excitation wavelength-dependent photoluminescence (PL), water solubility, simple preparation strategies, photoinduced electron transfer, and the opportunity for functionalization. A new family of C-dots called "carbon quantum dots" (CQDs) are fluorescent zero-dimensional carbon nanoparticles of size < 10 nm. The green synthesis of C-dots has numerous advantages over conventional chemical routes, such as utilization of inexpensive and non-poisonous materials, straightforward operations, rapid reactions, and renewable precursors. Natural sources, such as biomass and biomass wastes, are broadly accepted as green precursors for fabricating C-dots because these sources are economical, ecological, and readily/extensively accessible. Two main methods are available for C-dots production: top-down and bottom-up. Herein, this review article discusses the recent advancements in the green fabrication of C-dots: photostability; surface structure and functionalization; potential applications for the sensing of hazardous anions and toxic heavy-metal ions; binding of toxic ions with C-dots; probable mechanistic routes of PL-based sensing of toxic heavy-metal ions. The green production of C-dots and their promising applications in the sensing of hazardous ions discussed herein provides deep insights into the safety of human health and the environment. Nonetheless, this review article provides a resource for the conversion of low-value biomass and biomass waste into valuable materials (i.e., C-dots) for promising sensing applications.

Carbon quantum dots for fluorescent detection of nitrite: A review

NO₂^- is commonly found in foods and the environment, and excessive intake of NO₂^- poses serious hazards to human health. Thus, rapid and accurate assay of NO₂^- is of considerable significance. Traditional instrumental approaches for detection of NO₂^- faced with limitations of expensive instruments and complicated operations. Current gold standards for sensing NO₂^- are Griess assay and 2,3-diaminonaphthalene assay, which suffer from slow detection kinetics and bad water solubility. The newly emerged carbon quantum dots (CQDs) exhibit integrated merits including easy fabrication, low-cost, high quantum yield, excellent photostability, tunable emission behavior, good water solubility and low toxicity, which make CQDs be widely applied to fluorescent assay of NO₂^-. In this review, synthetic strategies of CQDs are briefly presented. Advances of CQDs for fluorescent detection of NO₂^- are systematically highlighted. Lastly, the challenges and perspectives in the field are discussed.

Analyte-triggered cascade signal amplification strategy for highly sensitive detection of iodate in table salt with dual-readout signals

A novel and highly sensitive upconversion fluorescence and colorimetric dual readout iodate (IO₃^-) nanosensor system was constructed by using both the outstanding optical performance of NaYF₄:Yb, Tm upconversion nanoparticles (UCNPs) and the analyte-triggered cascade signal amplification (CSA) technique. The construction of the sensing system consisted of three processes. First, IO₃^- oxidized o-phenylenediamine (OPD) to diaminophenazine (OPDox), while IO₃^- was reduced to I₂. Second, the generated I₂ can further oxidize OPD to OPDox. This mechanism has been verified by ¹H NMR spectra titration analysis and HRMS measurement, which effectively improves the selectivity and sensitivity of the measurement of IO₃^-. Third, the generated OPDox can effectively quench the fluorescence of UCNPs via the inner filter effect (IFE), realize analyte-triggered CSA, and allow quantitative determination of IO₃^-. Under the optimized conditions, the fluorescence quenching efficiency showed a good linear relationship to IO₃^- concentration in the range of 0.06-100 μM, and the detection limit reached 0.026 μM (3RSD/slope). Moreover, this method was applied to detect IO₃^- in table salt samples, yielding satisfactory determination results with excellent recoveries (95.5-105%) and high precision (RSD <5.5%). These results suggest that the dual-readout sensing strategy with well-defined response mechanisms has promising application prospects in physiological and pathological studies.

Luminescent Guests Encapsulated in Metal-Organic Frameworks for Portable Fluorescence Sensor and Visual Detection Applications: A Review

Metal-organic frameworks (MOFs) have excellent applicability in several fields and have significant structural advantages, due to their open pore structure, high porosity, large specific surface area, and easily modifiable and functionalized porous surface. In addition, a variety of luminescent guest (LG) species can be encapsulated in the pores of MOFs, giving MOFs a broader luminescent capability. The applications of a variety of LG@MOF sensors, constructed by doping MOFs with LGs such as lanthanide ions, carbon quantum dots, luminescent complexes, organic dyes, and metal nanoclusters, for fluorescence detection of various target analyses such as ions, biomarkers, pesticides, and preservatives are systematically introduced in this review. The development of these sensors for portable visual fluorescence sensing applications is then covered. Finally, the challenges that these sectors currently face, as well as the potential for future growth, are briefly discussed.

Green synthesized fluorescent carbon dots from oak apple for detection of efavirenz

In this study, a facile synthesis of fluorescence carbon dots (CDs) from local oak apple (O-CDs) in the mountainous region of Zagros was performed through hydrothermal treatment. The characterization of O-CDs was carried out by SEM, TEM, FTIR, EDX, Mapping, lain scan, and AFM, respectively. In addition, the fluorescence of CDs was quenched by efavirenz with a linear concentration of 10 to 450 μM, associated with the limit of detection of 3 μM. Subsequently, the CDs were successfully applied for efavirenz probing in blood plasma environment.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10854-023-09929-z.

Ultra-trace detection and efficient adsorption removal of multiple water-soluble volatile organic compounds by fluorescent sensor array

Due to the extremely low concentration, complex composition and easy to be converted into each other in water and air of water-soluble volatile organic compounds (VOCs), it is a great challenge to the traditional detection technology, pollution control and traceability, etc. Therefore, developing a convenient, swift and on-site detection method for simultaneous quantification of multiple VOCs is highly anticipated. In this paper, a multifunctional sensor array with adsorption and sensing of VOCs has been constructed by four fluorescence channels of small-sized Eu@Uio-66 and Tb@Uio-66. Due to the obvious cross-reactive characteristics between 4 fluorescence channels and VOCs, the sensor array could detect 8 VOCs simultaneously with all detection limits as low as ppb level. In addition, the detection results of sensor array for actual water samples coexisting with multiple VOCs confirmed that it has strong anti-interference performance and could be used for simultaneous detection of multiple VOCs in real water. The construction of sensor array with VOC adsorption function not only helps to reduce the detection limit of VOCs benefiting from the pre-concentration of materials, but also has significant value to reduce the harmfulness of pollutants. Predictably, this work is of great significance for VOC traceability, analysis of ecotoxicological effects and monitoring of pollution distribution characteristics.

Detection of Indigo Carmine dye in juices via application of photoluminescent europium-doped carbon dots from tannic acid

Indigo Carmine is a hazardous dye and produces an allergic action for humans despite the excessive use of the dye in several industrial fields. A sensitive and simple fluorescent assay for determining Indigo Carmine relying on quenching of the fluorescent europium-doped carbon dots by the action of inner filter effect was developed. This sensing platform involved the preparation of europium-doped carbon dots from the hydrothermal carbonization of tannic acid and europium chloride, which was used as fluorescent reagent with a distinctive excitation/emission wavelength at 307/340 nm. Both excitation and emission fluorescence of prepared carbon dots can be successfully quenched by adding Indigo Carmine dye. The developed spectrofluorimetric method exhibits good linearity with the concentration of Indigo Carmine dye in the range of 1.5 to 10.0 μg/ml and provided a limit of detection (LOD) value of 0.40 μg/ml. Furthermore, the prepared carbon nanoparticles were identified and characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR), and ultraviolet (UV)-spectrophotometer techniques. In addition, the developed detecting approach was applied to determine Indigo Carmine in juice samples with acceptable recovery.

Red emitting fluorescent carbon nanoparticles to track spatio-temporal dynamics of endocytic pathways in model neuroblastoma neurons

One of the biggest challenges limiting the biological applications of fluorescent carbon-based nanoparticles is their capacity to emit in the red region of the spectrum and simultaneously maintaining the smaller size. These two parameters always go in inverse proportion, thus lagging their applications in biological imaging. Endocytic pathways play important roles in regulating major cellular functions such as cellular differentiation. The Spatio-temporal dynamics of endocytic pathways adopted by various ligands (including nanoparticles) over longer durations in cellular differentiation remain unstudied. Here we have used red-emitting fluorescent carbon nanoparticles to study the endocytic pathways in neuronal cells at different stages of differentiation. These small-sized, bright, red-emitting carbon nanoparticles (CNPs) can be internalized by live cells and imaged for extended periods, thus capturing the Spatio-temporal dynamics of endocytic pathways in model SH-SY5Y derived neuroblastoma neurons. We find that these nanoparticles are preferably taken up via clathrin-mediated endocytosis and follow the classical recycling pathways at all the stages of neuronal differentiation. These nanoparticles hold immense potential for their size, composition, surface and fluorescence tunability, thus maximizing their applications in spatio-temporally tracking multiple cellular pathways in cells and tissues simultaneously.

A Ratiometric Probe Based on Carbon Dots and Calcein & Eu3+ for the Fluorescent Detection of Sodium Tripolyphosphate

Sodium tripolyphosphate, a food additive, is applied broadly in food industry. However, excessive accumulation of sodium tripolyphosphate can result in electrolyte abnormality of the body. Therefore, it is of great importance to investigate an effective method for the detection of sodium tripolyphosphate. In this work, nitrogen-doped carbon dots (NCDs) with constant fluorescence were fabricated using a domestic microwave oven. A ratiometric fluorescent probe was constructed in which NCDs were as internal standard, calcein & Eu³⁺ were as the detection signal. The fluorescence of calcein at 515 nm was quenched by Eu³⁺, whereas the emission peak of NCDs at 446 nm was almost unchanged. Additionally, the fluorescence of calcein was recovered because of the strong interaction of sodium tripolyphosphate and Eu³⁺. The linear range for sodium tripolyphosphate was 0.5-6 µmol/L with detection limit of 0.12 µmol/L. Furthermore, the ratiometric fluorescent probe was applied for sodium tripolyphosphate detection in real milk samples.

MoS2 quantum dots as fluorescent probe for methotrexate detection

Herein, we developed a unique fluorescence biosensor for methotrexate assay based on MoS₂ quantum dots, which were synthesized in one step using sodium molybdate and cysteine as raw materials. The fluorescence of MoS₂ QDs could be quenched when encountered with methotrexate, which was attributed to the inner filter effect (IFE). Furthermore, this present IFE-based method showed the linearity between the MoS₂ QDs fluorescence intensity and the methotrexate concentration in the range of 0.05-1 μM with the LOD of 42 nM. The practical applicability of this strategy was successfully demonstrated by detecting methotrexate in real samples. Results indicated that the proposed method could be a promising sensing platform for methotrexate analysis.

Recent Advanced in MXene Research toward Biosensor Development

MXene is a rapidly emerging group of two-dimensional (2D) multifunctional nanomaterials, drawing huge attention from researchers of a broad scientific field. Reporting the synthesis of MXene was the following breakthrough in 2D materials following the discovery of graphene. MXene is considered the most recent developments of materials, including transition metal carbonitrides, nitrides, and carbides synthesized by etching or mechanical-based exfoliation of selective MAX phases. MXene has a plethora of prodigious properties such as unique interlayer spacing, high ion and electron transport, large surface area, excellent thermal and electrical conductivity, exceptional volumetric capacitance, thermal shock, and oxidation resistance, easily machinable and inherently hydrophilic, and biocompatibility. Owing to the abundance of tailorable surface function groups, these properties can be further enhanced by surface functionalization with covalent and non-covalent modifications via numerous surface functionalization methods. Therefore, MXene finds their way to a plethora of applications in numerous fields including catalysis, membrane separation, energy storage, sensing, and biomedicine. Here, the focus is on reviewing the structure, synthesis techniques, and functionalization methods of MXene. Furthermore, MXene-based detection platforms in different sensing applications are survived. Great attention is given to reviewing the applications of MXene in the detection of biomolecules, pathogenic bacteria and viruses, cancer biomarkers food contaminants and mycotoxins, and hazardous pollutants. Lastly, the future perspective of MXene-based biosensors as a next-generation diagnostics tool is discussed. Crucial visions are introduced for materials science and sensing communities to better route while investigating the potential of MXene for creating innovative detection mechanisms.

Carbon quantum dots: An environmentally friendly and valued approach to sludge disposal

Sewage sludge, produced daily and inherent to urban development, presents problems of disposal that are still challenging today. Its disposal still offers palliative solutions, where the final destination is generally in landfills or, restrictively, to use in agriculture. The synthesis of carbon quantum dots (CQDs) from sewage sludge is a better alternative to use the stock of organic material present in the sludge. The present work aims to produce Carbon quantum dots (CQDs) using principles of green chemistry and to use an alternative raw material intrinsic stock of carbon present in sewage sludge, making its final disposal more sustainable. The material obtained has a core structure mainly composed of sp² carbon and nitrogen. The surface functional groups containing sulfur, nitrogen, and oxygen of CQDs were investigated using FTIR and TG/DSC coupled FTIR techniques. The CQDs showed a luminescence decay time equivalent to fluorescent compounds and with satisfying quantum yield since no passive/oxidizing agent or material purification process was used. The photoluminescence spectroscopy analysis showed that the CDQs excitation λ_max was at 360 nm and caused a λ_max emission at 437 nm (CQDs^a) and 430 nm (CQDs^b). The CQDs obtained showed sizes of 9.69 ± 2.64 nm (CQDs^a) and 10.92 ± 2.69 nm (CQDs^b). In vitro experiments demonstrated the uptake of CQDs by the endothelial cell line EAhy 926 and their nontoxicity. However, the production of CQDs can be used for the sustainable disposal of sewage sludge.

Metal-organic frameworks as a therapeutic strategy for lung diseases

Lung diseases remain a global burden today. Lower respiratory tract infections alone cause more than 3 million deaths worldwide each year and are on the rise every year. In particular, with coronavirus disease raging worldwide since 2019, we urgently require a treatment for lung disease. Metal organic frameworks (MOFs) have a broad application prospect in the biomedical field due to their remarkable properties. The unique properties of MOFs allow them to be applied as delivery materials for different drugs; diversified structural design endows MOFs with diverse functions; and they can be designed as various MOF-drug synergistic systems. This review concentrates on the synthesis design and applications of MOF based drugs against lung diseases, and discusses the possibility of preparing MOF-based inhalable formulations. Finally, we discuss the chances and challenges of using MOFs for targeting lung diseases in clinical practice.

A visible-light-responsive DiSCn(3)-type fluorescent probe for the rapid, sensitive, and specific detection of tin(II) ions in aqueous solution

Visible-light-excited fluorescent probes with excellent water solubility are of significant research importance in the biomedical field. In this work, a series of visible-light-responsive carbocyanine fluorescent compounds [DiSCn(3)] are synthesized from 2-methylbenzothiazole and are employed as fluorescent probes for detecting tin(II) ions. Upon addition of tin(II) ions to an aqueous solution of compounds DiSCn(3)-3 and 4, both exhibit considerable changes in their absorption and fluorescent intensity, respectively. These spectral changes may correspond to the binding between tin(II) ions and the sulfur atom in the benzothiazole unit to form a metal complex. This indicates that DiSCn(3)-3 and 4 can be used as promising fluorescent chemical sensors for detecting tin(II) ions in aqueous solution via visible-light excitation.

Screening of multifunctional fruit carbon dots for fluorescent labeling and sensing in living immune cells and zebrafishes

Nine kinds of carbon dots (CDs) were synthesized by using fruits with different varieties as carbon sources; meanwhile, the fluorescence characteristics, quantum yield, and response ability to different metal ions and free radicals were systematically studied. These CDs showed similar excitation and emission spectral ranges (λ_ex ≈ 345 nm, λ_em ≈ 435 nm), but very different fluorescence quantum yield (QY), in which orange and cantaloupe CDs have the highest QY around 0.25 and green plum CDs showed the lowest quantum yield around 0.1. Interestingly, the fluorescence of all of these CDs can be significantly quenched by hydroxyl radical (•OH) and iron ion (Fe³⁺); however, these CDs showed very different response characteristics to other metal ions (e.g., Co²⁺, Ni²⁺, Cu²⁺, Ce³⁺, Mn²⁺, Ag⁺, and Fe²⁺). Through in-depth analysis, we found some interesting patterns of the influence of carbon sources on the fluorescence characteristics of CDs. Finally, by using white pitaya CDs as fluorescence probe, we realized sensing of Fe³⁺ and •OH with limits of detection (LOD) of 19.4 μM and 0.7 μM, respectively. Moreover, the CDs were also capable for sensitive detection in immune cells and even in zebrafishes. Our work can provide valuable guidance for the rational design of functional CDs for biological applications.

Ultrafast synthesized monometallic nanohybrids as an efficient quencher and recognition antenna of upconversion nanoparticles for the detection of xanthine with enhanced sensitivity and selectivity

Upconversion nanoparticles (UCNPs) have shown great promise in bioanalytical applications owing to their excellent optical properties. Generally, most analytical applications are based on the fluorescence resonance energy transfer (FRET) principle to quench the fluorescence of UCNPs. However, each UCNP contains thousands of emission center ions, and most of them exceed the FRET critical distance, which hinders FRET efficiency and leads to a low signal-to-background ratio (SBR). Herein, a novel nanoprobe for the detection of Xanthine (XA) based on inner filter effects (IFE) and cascade signal amplification strategy was constructed by decorating UCNP with trypsin-chymotrypsin-stabilized gold nanoparticles-gold nanoclusters (Try-chy-AuNPs-AuNCs) monometallic nanohybrids. The Try-chy-AuNPs-AuNCs prepared by ultrafast (3 min) and green synthesis method have efficient upconversion fluorescence quenching ability (the quenching efficiency up to 90.9%), which can effectively improve the SBR of the probe, so as to improve the sensitivity. In addition, the Try-chy-AuNPs-AuNCs have a unique spatial structure, which can effectively prevent the interaction between large-size biothiol (glutathione) and the probe, thus improving its selectivity. Besides, combined with the excellent optical performance of UCNPs and cascaded signal amplification strategy, the sensitivity of the probe can be further improved. Under the optimized conditions, the linear response range of the probe was obtained from 0.05 to 50 μM, 0.06-80 μM and with the low detection limit of 22.6 nM and 26.3 nM for H₂O₂ and XA, respectively. Meanwhile, the developed method has been further applied to the detection of XA in human serum with satisfactory results.

PVDF/SiO2-g-CDs blended membrane for fluorescence detection and adsorption of metal ions

The preparation method of PVDF/SiO₂-g-CDs blended membrane was that the silanized modified carbon dots (CDs) were grafted onto the PVDF/SiO₂ blended membrane surface. The surface composition, morphology, hydrophilicity, fluorescence performance and metal ions adsorption performance of PVDF/SiO₂-g-CDs blended membrane were studied. The fluorescence quenching effect of the membrane with Hg²⁺ and Fe³⁺ was obvious. The quenching mechanism was the complexation of metal ions with the functional groups of CDs including -NH₂, -OH and -COOH. The optical detection limits of PVDF/SiO₂-g-CDs blended membrane for Hg²⁺ was 1.6 nM in the linear range of 0.0025-20 μM, and the optical detection limits for Fe³⁺ was 2.1 μM in the linear range of 0.5-5000 μM. The maximum adsorption capacity of PVDF/SiO₂-g-CDs blended membrane for Fe³⁺ was 47.04 mg·g^-1. The adsorption of the membrane conformed to the pseudo-second-order kinetics and Langumir model, and belonged to monolayer chemical adsorption on the membrane surface. Through adsorption thermodynamic analysis, adsorption was a spontaneous endothermic process. The recovery rate of fluorescence and adsorption capacity could still be maintained above 82% after five cycles. The PVDF/SiO₂-g-CDs blended membrane had the ability to regenerate. In summary, the PVDF/SiO₂-g-CDs blended membrane had the dual functions of detecting and adsorbing metal ions, and had broad application prospects in sewage treatment.

Carbon Dots: An Excellent Fluorescent Probe for Contaminant Sensing and Remediation

Pollution-induced degradation of the environment is a serious problem for both developing and developed countries. Existing remediation methods are restricted, necessitating the development of novel remediation technologies. Nanomaterials with unique characteristics have recently been developed for remediation. Quantum dots (QDs) are semiconductor nanoparticles (1-10 nm) with optical and electrical characteristics that differ from bigger particles owing to quantum mechanics, making them intriguing for sensing and remediation applications. Carbon dots (CDs) offer better characteristics than typical QDs, such as, CdSe QDs in terms of contaminant sensing and remediation. Non-toxicity, chemical inertness, photo-induced electron transfer, good biocompatibility, and adjustable photoluminescence behavior are all characteristics of CDs. CDs are frequently made from sustainable raw materials as they are cost-effective, environmentally compactable, and excellent in reducing waste generation. The goal of this review article is to briefly describe CDs fabrication methods, to deeply investigate the criteria and properties of CDs that make them suitable for sensing and remediation of contaminants, and also to highlight recent advances in their use in sensing and remediation of contaminants.

Detection of Fe3+ and Hg2+ Ions by Using High Fluorescent Carbon Dots Doped With S And N as Fluorescence Probes

In this paper, carbon quantum dots (N-S-CDs) containing sulfur and nitrogen were synthesized using citric acid and thiourea. The average particle size of N-S-CDs is 8 nm. The N-S-CDs surface contains various of functional groups, which has good water solubility. The fluorescence quantum yield of N-S-CDs is as high as 36.8%. N-S-CDs emits strong blue fluorescence in aqueous solution and has good photostability in neutral and alkaline NaCl solution. N-S-CDs has unique selectivity and high sensitivity to Fe³⁺ and Hg²⁺ ions, and the lowest detection limits are 1.4 μM and 0.16 μM, respectively. Under the interference of other metal ions, Fe³⁺ and Hg²⁺ ions can still effectively and stably quench the fluorescence of N-S-CDs. In addition, in the detection of actual samples, N-S-CDs can effectively detect Fe³⁺ and Hg²⁺ ions in tap water and lake water.

Preparation and Characterization of Photoluminescent Graphene Quantum Dots from Watermelon Rind Waste for the Detection of Ferric Ions and Cellular Bio-Imaging Applications

Graphene quantum dots (GQDs) were synthesized using watermelon rind waste as a photoluminescent (PL) agent for ferric ion (Fe3+) detection and in vitro cellular bio-imaging. A green and simple one-pot hydrothermal technique was employed to prepare the GQDs. Their crystalline structures corresponded to the lattice fringe of graphene, possessing amide, hydroxyl, and carboxyl functional groups. The GQDs exhibited a relatively high quantum yield of approximately 37%. Prominent blue emission under UV excitation and highly selective PL quenching for Fe3+ were observed. Furthermore, Fe3+ could be detected at concentrations as low as 0.28 μM (limit of detection), allowing for high sensitivity toward Fe3+ detection in tap and drinking water samples. In the bio-imaging experiment, the GQDs exhibited a low cytotoxicity for the HeLa cells, and they were clearly illuminated at an excitation wavelength of 405 nm. These results can serve as the basis for developing an environment-friendly, simple, and cost-effective approach of using food waste by converting them into photoluminescent nanomaterials for the detection of metal ions in field water samples and biological cellular studies.

A review on I–III–VI ternary quantum dots for fluorescence detection of heavy metals ions in water: optical properties, synthesis and application

Ternary I–III–VI quantum dots used in the fluorescence detection of heavy metals ions in water.

Application of carbon dots and their composite materials for the detection and removal of radioactive ions: A review

Radioactive ions with high-heat release or long half-life could cause long-term influence on environment and they might enter the food chain to damage human body for their toxicity and radioactivity. It is of great importance to develop methods and materials to detect and remove radioactive ions. Carbon dots and their composite materials has been applied widely in many fields due to their plentiful raw materials, facile synthesis and functional process, unique optical property and abundant functional groups. This comprehensive review focuses on the preparation of CDs and composite materials for the detection and adsorption of radioactive ions. Firstly, the recent-developed synthetic methods for CDs were summarized briefly, including hydrothermal/solvothermal, microwave, electrochemistry, microplasma, chemical oxidation methods, focusing on the influence of CDs properties. Secondly, the synthetic methods for CDs composite materials were classified to four categories and summarized generally. Thirdly, the application of CDs for radioactive ions detection and adsorption were explored and concluded including uranium, iodine, europium, strontium, samarium et al. Finally, the detection and adsorption mechanism for radioactive ions were searched and the perspective and outlook of CDs for detection and adsorption radioactive ions have been proposed based on our understanding.