Detection of T4 polynucleotide kinase activity based on cationic conjugated polymer-mediated fluorescence resonance energy transfer

Detection of Streptavidin Based on Terminal Protection and Cationic Conjugated Polymer-Mediated Fluorescence Resonance Energy Transfer

In this paper, a fast and simple strategy for sensitive detection of streptavidin (SA) was proposed based on terminal protection of small molecule-linked DNA and cationic conjugated polymer-mediated fluorescence resonance energy transfer (FRET). In principle, we designed a biotin-labelled DNA probe (P1) as the recognitive probe of SA, along with a complementary DNA probe (P2) to form double-stranded DNA (dsDNA) with P1. SYBR Green I (SG I) as a fluorescent dye was further used to specifically bind to dsDNA to emit stronger fluorescence. The cationic poly[(9,9-bis(6′-N,N,N-triethy-lammonium)hexyl) fluorenylene phenylene dibromide] (PFP) acted as the donor to participate in the FRET and transfer energy to the recipient SG I. In the absence of SA, P1 could not hybridize with P2 to form dsDNA and was digested by exonuclease I (Exo I); thus, only a weak FRET signal would be observed. In the presence of SA, biotin could specifically bind to SA, which protected P1 from Exo I cleavage. Then, P1 and P2 were hybridized into dsDNA. Therefore, the addition of SG I and PFP led to obvious FRET signal due to strong electrostatic interactions. Then, SA can be quantitatively detected by monitoring FRET changes. As the whole reagent reaction was carried out in 1.5 mL EP and detected in the colorimetric dish, the operation process of the detection system was relatively simple. The response time for each step was also relatively short. In this detection system, the linear equation was obtained for SA from 0.1 to 20 nM with a low detection limit of 0.068 nM (S/N = 3). In addition, this strategy has also achieved satisfactory results in the application of biological samples, which reveals the application prospect of this method in the future.

β-Lactoglobulin amyloid fibril-templated gold nanoclusters for cellular multicolor fluorescence imaging and colorimetric blood glucose assay

β-Lactoglobulin amyloid fibril (BLGF)-capped gold nanoclusters (Au NCs) with red, green and blue emissions were fabricated via pH-dependent reduction strategy. The BLGF-Au NCs exhibited 3.2 times enhancement of fluorescence (λex = 500 nm, λem = 684 nm), a significant 42 nm red shift, a 11.57% quantum yield and a 1.4 μs decay time compared with native β-lactoglobulin (BLG)-stabilized Au NCs. Meanwhile, the multicolor Au NCs were employed for cell imaging via incubation with A549 cells for 14 h. According to the Michaelis-Menten equation, the kinetic parameters of the BLGF-Au NCs showed a lower Km value (66 μmol L-1) for 3,3,5,5-tetramethylbenzidine (TMB) and a higher vmax (3.74 × 10-8 M s-1) for H2O2, which are comparable with other artificial nanoenzymes and natural peroxidases. Based on the highly intrinsic peroxidase-like activity of the BLGF-Au NCs, a colorimetric method was developed for glucose determination with a detection limit of 1.5 μmol L-1 by determining the variation of the absorption at 652 nm, ranging from 5 to 100 μmol L-1. In addition, the glucose assay method also revealed a 101.02 to 104.16% recovery in a real human serum sample.

A versatile fluorometric in situ hybridization method for the quantitation of hairpin conformations in DNA self-assembled monolayers

As the performance of hairpin DNA (hpDNA)-based biosensors is highly dependent on the yield of stem-loop (hairpin) conformations, we report herein a versatile fluorometric in situ hybridization protocol for examining hpDNA self-assembled monolayers (SAMs) on popularly used biochip substrates. Specifically, the ratio of fluorescence (FL) intensities of hpDNA SAMs (in an array format) before and after hybridization was adopted as the key parameter for performing such a determination. Upon confirming the existence of mixed and tunable DNA conformations in binary deposition solutions and efficient hybridization of the hairpin strands with the target DNA via gel electrophoresis assays, we tested the fluorometric protocol for determining the coverages of hpDNA in hpDNA/ssDNA SAMs prepared on gold; its accuracy was validated by Exonuclease I (Exo I)-assisted electrochemical quantitation. To further confirm its versatility, this FL protocol was adopted for quantifying hairpin conformations formed on glass and polycarbonate (PC) substrates. The molar ratios of surface-tethered hairpin conformations on the three different substrates were all found to be proportional to but less than those in the binary deposition solutions, and were dependent on the substrate morphology. The findings reported herein are beneficial for the construction of highly efficient DNA hairpin-based sensing surfaces, which essentially facilitates the creation of hpDNA-based biosensors with optimal detection performance.

Exonuclease III-assisted signal amplification strategy for sensitive fluorescence detection of polynucleotide kinase based on poly(thymine)-templated copper nanoparticles

A sensitive and label-free fluorometric method has been developed for the determination of polynucleotide kinase (PNK) activity, by employing exonuclease III (Exo III)-assisted cyclic signal amplification and poly(thymine)-templated copper nanoparticles (polyT-CuNPs). In the presence of PNK, cDNA with 5'-hydroxyl termini was phosphorylated and then hybridized with tDNA to form the cDNA/tDNA duplex, which subsequently triggered the λ exonuclease cleavage reaction, eventually resulting in the release of tDNA. The released tDNA could unfold the hairpin structure of HP DNA to generate partially complementary duplex (tDNA/HP DNA), wherein the HP DNA possessed T-rich sequences (T30) and tDNA recognition sequence. With the help of Exo III digestion, the tDNA was able to initiate the cycle for the generation of T-rich sequences, the template for the formation of fluorescent CuNPs. Conversely, the cDNA could not be cleaved by λ exonuclease without PNK and individual HP DNA could not be hydrolyzed by Exo III. The T-rich sequence was caged in HP DNA, resulting in a weak fluorescence signal. Under optimized conditions, the fluorescence intensity was linearly correlated to a concentration range of 0.001 to 1 U mL-1 with a low detection limit of 2 × 10-4 U mL-1. Considering the intriguing analytical performance, this approach could be explored to screen T4 PNK inhibitors and hold promising applications in drug discovery and disease therapy.

Isothermal cross-boosting extension–nicking reaction mediated exponential signal amplification for ultrasensitive detection of polynucleotide kinase

A novel nucleic acid-based isothermal signal amplification strategy, named cross-boosting extension–nicking reaction (CBENR) is developed and successfully used for rapid and ultrasensitive detection of polynucleotide kinase (PNK) activity.

Ratio fluorescence analysis of T4 polynucleotide kinase activity based on the formation of a graphene quantum dot-copper nanocluster nanohybrid

In this work, a ratio fluorescence method was developed for T4 polynucleotide kinase (PNK) activity analysis based on the formation of a dual-emitting graphene quantum dot-copper nanocluster (GQD-CuNC) nanohybrid. An amino capped single-strand DNA (ssDNA) was firstly used to modify GQDs (GQD-ssDNA) and then hybridize with its complementary DNA strand to form double-stranded DNA functionalized GQDs (GQD-dsDNA). The dsDNA of GQD-dsDNA can act as an effective template for the preparation of CuNCs with fluorescence emission at 594 nm. When the dsDNA of GQD-dsDNA was phosphorylated through T4 PNK and subsequently degraded via λ exonuclease (λ exo) to produce mononucleotides and GQD-ssDNA, the formation of fluorescence CuNCs in GQD-CuNCs was blocked due to the lack of an effective dsDNA substrate, during which the fluorescence of GQDs at 446 nm in the nanohybrid was mostly not influenced. Thus, with the CuNCs serving as the reporter and GQDs as the reference signal, T4 PNK activity can be monitored through the change in the fluorescence intensity ratio (F₅₉₄/F₄₄₆) in the range of 0.01-10 U mL^-1 with a detection limit (LOD) of 0.0037 U mL^-1. Furthermore, the practicality of this T4 PNK activity analysis strategy in a complex sample was tested in cell lysates.

A DNA functionalized porphyrinic metal-organic framework as a peroxidase mimicking catalyst for amperometric determination of the activity of T4 polynucleotide kinase

An electrochemical method is described for the sensitive detection of the activity of the enzyme T4 polynucleotide kinase (PNK) by using a DNA functionalized porphyrinic metal-organic framework (L/(Fe-P)n-MOF). In the presence of PNK, the hairpin oligonucleotide (HP1) becomes phosphorylated, and the trigger is released by lambda exonuclease (λ exo). The trigger DNA hybridizes with hairpin probe (immobilized on the gold electrode) to form a nicking endonuclease cleavage site. Thus, a single-strand capture probe is employed to hybridize with L/(Fe-P)n-MOF. The (Fe-P)n-MOF is a peroxidase mimicking material with high catalytic efficiency. By using this amplification strategy, an electrochemical signal is procured that allows for the determination of T4 PNK in the 1.0 mU·mL^-1 to 1.0 U·mL^-1 with a detection limit of 0.62 mU·mL^-1. The method is selective and can be used to screen for enzyme inhibitors. Conceivably, the (Fe-P)n-MOF can also be used to detect other analytes via its peroxidase-mimicking activity. Graphical abstract Schematic presentation of T4 polynucleotide kinase (PNK) detection. Two hairpin DNAs (HP) and a porphyrinic metal-organic framework with peroxidase-mimicking activity are used. The detection limit is 0.62 mU mL^-1 with enzyme assisted signal amplification. This method is selective and can be used to screen for enzyme inhibitors.

A modified exponential amplification reaction (EXPAR) with an improved signal-to-noise ratio for ultrasensitive detection of polynucleotide kinase

We reported a modified exponential amplification reaction strategy and applied it to design an ultrasensitive biosensor for the detection of endogenous polynucleotide kinase activity at single-cell level.

Fluorescent Probes of DNA Repair

DNA repair is now understood to play a key role in a variety of disease states, most notably cancer. Tools for studying DNA have typically relied on traditional biochemical methods which are often laborious and indirect. Efforts to study the biology and therapeutic relevance of DNA repair pathways can be limited by such methods. Recently, specific fluorescent probes have been developed to aid in the study of DNA repair. Fluorescent probes offer the advantage of being able to directly assay for DNA repair activity in a simple, mix-and-measure format. This review will summarize the distinct classes of probe designs and their potential utility in varied research and preclinical settings.

Detection of T4 Polynucleotide Kinase via Allosteric Aptamer Probe Platform

As a vital enzyme in DNA phosphorylation and restoration, T4 polynucleotide kinase (T4 PNK) has aroused great interest in recent years. Therefore, numerous strategies have been established for highly sensitive detection of T4 PNK based on diverse signal amplification techniques. However, they often need sophisticated design, a variety of auxiliary reagents and enzymes, or cumbersome manipulations. We have designed a new kind of allosteric aptamer probe (AAP) consisting of streptavidin (SA) aptamer and the complementary DNA (cDNA) for simple detection of T4 PNK without signal amplification and with minimized interference in complex biological samples. When the 5'-terminus of the cDNA is phosphorylated by T4 PNK, the cDNA is degraded by lambda exonuclease to release the fluorescein amidite (FAM)-labeled SA aptamer, which subsequently binds to streptavidin beads. The enhancement of the fluorescence signal on SA beads can be detected precisely and easily by a microscope or flow cytometer. Our method performs well in complex biological samples as a result of the enrichment of the signaling molecules on beads, as well as simple manipulations to discard the background interference and nonbinding molecules. Without signal amplification techniques, our AAP method not only avoids complicated manipulations but also decreases the time required. With the advantages of ease of operation, reliability, and robustness for T4 PNK detection in buffer as well as real biological samples, the AAP has great potential for clinical diagnostics, inhibitor screening, and drug discovery.

Competition-derived FRET-switching cationic conjugated polymer-Ir(III) complex probe for thrombin detection

A novel, label-free and convenient strategy for thrombin assay has been developed based on the fluorescence resonance energy transfer (FRET) from a cationic conjugated polymer (CCP) to Ir(III) complex. The energy donor (CCP) and acceptor (Ir(III) complex) were taken into close proximity through π-π stacking interaction and electrostatic interaction, leading to the occurrence of FRET. However, the introduction of the thrombin aptamer upset the status and blocked the FRET process, but afterwards the reappearance of FRET phenomenon was confirmed by the special binding interaction between aptamer and thrombin, thus achieving the quantitative detection of thrombin. This assay could detect thrombin as low concentration as about 0.05pM and provided a highly specific selectivity among other nonspecific proteins. Moreover, the strategy may allow our platform to provide similar sensitivity toward different targets in an aptamer-structure-independent manner. Furthermore, the assay can be used to detect thrombin in diluted real urine or serum samples with a satisfactory recovery, implying its great potential for rapid detection of thrombin in the clinic.

Assembly of neutral conjugated polymers with layered double hydroxide nanosheets by the layer-by-layer method

This article reports that the neutral conjugated polymers (NCPs) can also be assembled with exfoliated MgAl-layered double hydroxide (LDH) nanosheets to form the ordered inorganic/organic hybrid ultrathin films via the LbL assembly technique.

Thioflavin T as an Efficient G-Quadruplex Inducer for the Highly Sensitive Detection of Thrombin Using a New Föster Resonance Energy Transfer System

We report a new Föster resonance energy transfer (FRET) system that uses a special dye, thioflavin T (ThT), as an energy acceptor and a water-soluble conjugated polymer (CP) with high fluorescence as an energy donor. A simple, label-free, and sensitive strategy for the detection of thrombin in buffer and in diluted serum was designed based on this new system using ThT as an efficient inducer of the G-quadruplex. The difference between the blank and the positive samples was amplified due to distinctive FRET signals because thrombin has little effect on the intercalation of ThT into the G-quadruplex. In the absence of the target, ThT induces the aptamer to form a G-quadruplex and intercalates into it with strong fluorescence. The electrostatic attractions between the negatively charged G-quadruplex and positively charged CP allow a short donor-acceptor distance, resulting in a high FRET signal. However, in the presence of the target, the aptamer forms a G-quadruplex-thrombin complex first, followed by the intercalation of ThT into the G-quadruplex. A long distance exists between the donor and acceptor due to the strong steric hindrance from the large-sized thrombin, which leads to a low FRET signal. Compared with previously reported strategies based on the FRET between the CP and dye, our strategy is label-free, and the sensitivity was improved by an order of magnitude. Our strategy also shows the advantages of being simple, rapid (about 50 min), sensitive, label-free, and low-cost in comparison to strategies based on the FRET between quantum dots and dyes.

A poly(ADP-ribose) polymerase-1 activity assay based on the FRET between a cationic conjugated polymer and supercharged green fluorescent protein

A label-free strategy for PARP-1 activity assay and inhibitors assessment has been developed based on the FRET between a cationic conjugated polymer (CCP) and supercharged green fluorescent protein (scGFP).

A sensitive immobilization-free electrochemical assay for T4PNK activity based on exonuclease III-assisted recycling

This work develops a novel, immobilization-free, simple and sensitive electrochemical platform for the detection of T4PNK activity based on λ-exo and exonuclease III-assisted signal amplification.

Label-free fluorescence light-up detection of T4 polynucleotide kinase activity using the split-to-intact G-quadruplex strategy by ligation-triggered and toehold-mediated strand displacement release

A label-free, fluorescence light-up detection method for T4 polynucleotide kinase activity has been developed using the split-to-intact G-quadruplex strategy.