Fluorescence analysis of 6-mercaptopurine with the use of a nano-composite consisting of BSA-capped Au nano-clusters and core–shell Fe3O4–SiO2 nanoparticles

A novel turn-on fluorescence sensor based on the Nd (III) complex for the ultrasensitive detection of 6-mercaptopurine

6-mercaptopurine (6MP) is a chemotherapeuticdrug widely used for treating inflammatory bowel diseases and several cancers. Nevertheless, determining and monitoring its concentration in the human body is highly important because over or under-doses of 6MP can lead to critical health issues. In this paper, we have developed a turn-on fluorescent probe for the determination of the anticancer drug 6-mercaptopurine (6-MP) based on coordination complex [Nd (Anth)3 (H2O)3]. [Nd (Anth)3 (H2O)3] has been synthesized through a simple precipitation process taking the stoichiometric ratio of Nd (III) nitrate hexahydrate and 2-aminobenzoic acid (2-ABA), commonly known as anthranilic acid (Anth). The synthesis and structure have been investigated and validated by different characterizations like UV-visible spectroscopy, FT-IR, HRMS, XPS, and SEM. The synthesized complex displayed excellent fluorescence properties, and the fluorescence intensity was enhanced with the addition of 6MP in the form of a [Fe (6MP)3]2+ mixed complex (Fe-6MP), which is formed by dissolving it in FeCl3. The fabricated sensors displayed the best linear response in a wide range of concentrations from 2.55 μM to 45.51 μM of 6MP. The lower limit of detection (LOD) of the developed sensor was found to be 0.26 μM with a linear correlation coefficient (R2) of 0.99. The synthesized probe gives an acceptable response for the sensing of 6MP in the presence of several interfering agents.

I2/I--mediated fluorescence quenching of an Ag+-doped gold nanocluster-based immunoassay for sensitive detection of Escherichia coli O157:H7 in milk

Escherichia coli O157:H7 is a type of hazardous bacteria in the field of food safety. A sensitive and effective method is urgently needed to detect it, avoiding enormous harm for the human health. In this study, we synthesized stable Ag⁺-doped gold nanoclusters (Ag-AuNC) with a fluorescence intensity 4.8 times stronger than that of AuNC. It was further demonstrated that Ag⁰ existing in the AuNC core and a fraction of Ag⁺ anchored on the AuNC shell eliminated the surface defects and improved the luminescent properties of AuNC. A combination of I₂ and I^- was used to quench fluorescence-enhanced Ag-AuNC, which was first applied in ELISA for detecting E. coli O157:H7 to improve the sensitivity. In the presence of E. coli O157:H7, the biotinylated anti-E. coli O157:H7 mAb and streptavidin-alkaline phosphatase would be immobilized and catalyze l-ascorbic acid 2-phosphate sesquimagnesium salt hydrate to produce ascorbic acid. After addition of KIO₃, I₂/I^- were generated. The I₂ could trigger oxidative etching of Ag-AuNC and I^- could combine with Ag⁺ to decrease the Ag⁺ concentration of Ag-AuNC, which resulted in fluorescence quenching of Ag-AuNC. Under optimal conditions, the linear range of I₂/I^--mediated fluorescence quenching of Ag-AuNC-based immunoassay for detecting E. coli O157:H7 was 3.3 × 10³ to 10⁶ cfu/mL, with a detection limit of 9.2 × 10² cfu/mL, 10.7-fold lower than that of the traditional ELISA. The proposed immunoassay exhibits excellent sensitivity, specificity, recovery, and accuracy, which is useful for quantitative detection of E. coli O157:H7 in food safety.

A dual colorimetric and fluorometric sensor based on N, P-CDs and shape transformation of AgNPrs for the determination of 6-mercaptopurine

In this study, we designed a dual colorimetric and fluorometric sensor by using nitrogen and phosphor doped carbon dots (N, P-CDs) and Ag nanoprisms (AgNPrs) to detect 6-mercaptopurine (6-MP). For this purpose, we applied the AgNPrs/I^- mixture to establish a shape transformation based colorimetric method for the detection of 6-MP. The assay mechanism of colorimetric method was based on etching and protecting effect of I^- and 6-MP on the AgNPrs. In the presence of I^-, as an etching agent, the solution color altered from blue to purple and the position of AgNPrs' local surface plasmon resonance (LSPR) peak shifted to the blue wavelengths. This phenomenon was assigned to the morphological change of AgNPrs. In the presence of 6-MP, AgNPrs were protected from etching by I^-, so the LSPR peak position and solution color of AgNPrs remained unchangeable. Furthermore, the fluorescence intensity of N, P-CDs decreased with adding AgNPrs/I^- due to the spectral overlap between etched AgNPrs and N, P-CDs. The CDs' quenched fluorescence was restored in the presence of 6-MP, as a result of the protecting effect of 6-MP on the AgNPrs. These facts have been applied to develop a dual sensor for the determination of 6-MP at the range of 10-500 nM and 30-500 nM by colorimetric and fluorometric detection methods. The detection limits were obtained 10 and 4 nM for fluorometric and colorimetric methods, respectively. The developed sensor was utilized for dual signal analysis of 6-MP in human serum samples with satisfactory results.

Recent advances and applications of cyclodextrins in magnetic solid phase extraction

Cyclodextrins (CDs) as a family of cyclic oligosaccharides are toroidal with a hydrophobic interior and a hydrophilic exterior. They are well-known for their ability to form host-guest inclusion complexes with different compounds. They are used as chiral stationary phases in high performance liquid chromatography (HPLC) and gas chromatography (GC) or as chiral reagents in the background electrolyte of capillary electrophoresis (CE). In recent years, they have been used for modification of sorbents or as sorbents in solid phase extraction (SPE) procedures. Magnetic solid-phase extraction (MSPE), as a new type of SPE procedure, has received considerable attention due to its rapid phase separation process as compared to traditional extraction mode. This review covers the synthesis of CD-based magnetic sorbents (such as immobilization of CDs onto the different supports, production of nanosponges, and making hybrid substances with nanomaterials) and the use of these compounds in MSPE of different analytes from biological, environmental, and food samples. Also, prospects of CD-based sorbents for sample pre-treatment are also proposed.

A magnetic phosphorescence molecularly imprinted polymers probe based on manganese-doped ZnS quantum dots for rapid detection of trace norfloxacin residual in food

This paper reports the development of a novel probe based on magnetic room-temperature phosphorescence quantum dots with molecularly imprinted polymers (MQD-MIPs) for the rapid detection of trace norfloxacin (NFX) residual in complex food matrix. The highly selective probe was constructed by surface molecular imprinting technology using magnetic materials (Fe₃O₄ nanoparticles) as core, Mn-doped ZnS quantum dots (Mn-ZnS QDs) as phosphorescent materials, NFX as template, 3-aminopropyltriethoxysilane as functional monomer, and tetraethoxysilane as crosslinking agent. The as-obtained MQD-MIPs were characterized in detail by transmission electron microscopy, scanning electron microscopy, X-ray powder diffraction, Fourier transform infrared spectrometry, and vibrating sample magnetometer. A magnetic strength of 37.64 emu g^-1 was recorded. Also, the probe displayed excellent room temperature phosphorescence properties with excitation/emission peaks at 300/590 nm. Under the optimized conditions, the detection time was less than 40 min, phosphorescence intensity varied linearly with concentration from 1 to 90 μg·L^-1, and detection limit reached as low as 0.80 μg·L^-1. Furthermore, the MQD-MIPs-based probe successfully detected norfloxacin residues in spiked fish and milk samples with recoveries of 90.92-111.53% and RSD <7%, outperforming the standard control method-HPLC-FLD (recoveries of 85.89-118.28%).

Clustered Regularly Interspaced Short Palindromic Repeats-Mediated Surface-Enhanced Raman Scattering Assay for Multidrug-Resistant Bacteria

Antimicrobial resistance and multidrug resistance are slower-moving pandemics than the fast-spreading coronavirus disease 2019; however, they have potential to cause a much greater threat to global health. Here, we report a clustered regularly interspaced short palindromic repeats (CRISPR)-mediated surface-enhanced Raman scattering (SERS) assay for multidrug-resistant (MDR) bacteria. This assay was developed via a synergistic combination of the specific gene-recognition ability of the CRISPR system, superb sensitivity of SERS, and simple separation property of magnetic nanoparticles. This assay detects three multidrug-resistant (MDR) bacteria, species Staphylococcus aureus, Acinetobacter baumannii, and Klebsiella pneumoniae, without purification or gene amplification steps. Furthermore, MDR A. baumannii-infected mice were successfully diagnosed using the assay. Finally, we demonstrate the on-site capture and detection of MDR bacteria through a combination of the three-dimensional nanopillar array swab and CRISPR-mediated SERS assay. This method may prove effective for the accurate diagnosis of MDR bacterial pathogens, thus preventing severe infection by ensuring appropriate antibiotic treatment.

A novel hybrid fluorescence probe sensor based on metal-organic framework@carbon quantum dots for the highly selective detection of 6-mercaptopurine

In the present study, MIL-101(Fe) and amine-carbon quantum dots (CQDs) were combined via a post-synthetic modification (PSM) method; thus, a novel MIL-101(Fe)@amine-CQD hybrid fluorescent probe sensor for the detection of 6-mercaptopurine (6-MP) was synthesized. Amine-CQDs as a fluorescent material can convert the bonding interaction between MIL-101(Fe) and 6-MP into recognizable fluorescence signals, and MIL-101 (Fe) as an adsorbent can pre-concentrate 6-MP. Hereupon, this new sensor demonstrates high selectivity and sensitivity towards the detection of 6-MP. The addition of 6-MP to this probe quenches the fluorescence signal at 599 nm. In this study, factors such as pH, response time, and concentration of MIL-101(Fe)@amine-CQDs were optimized by the one-factor-at-a-time (OFAT) method. Under optimal conditions, the relationship between the fluorescence enhancement factor and the concentration of 6-MP for this sensor in the range of 0.1667-1.0000 μg L^-1 was linear (R² = 0.9977, n = 3). The limit of detection and limit of quantitation were 55.70 ng L^-1 and 202.06 ng L^-1, respectively, which are better than similar techniques. The repeatability of intra-day and inter-day was 2.4% and 4.7%, respectively. This fluorescent sensor was employed to determine 6-MP in real samples and exhibited acceptable results.

Ratiometric fluorescent nanoprobe based on CdTe/SiO2/folic acid/silver nanoparticles core-shell-satellite assembly for determination of 6-mercaptopurine

A sensitive and robust fluorescent assay of 6-MP is described which relies on the facile assembly of a fluorescence nanoprobe by design of silica nanosphere encapsulated CdTe quantum dots (CdTe QDs) as scaffold, coupling with chemically tethered folic acid (FA)-protected silver nanoparticles (AgNPs) that function as responsive element. In this way a stable ternary core-shell-satellite nanostructure with dual-emission signals can be established. On binding to the target molecules, 6-MP, FA molecules initially occupied by AgNPs are liberated to give dose-dependent fluorescence emission, which can further form a self-calibration ratiometric fluorescence assay using CdTe QDs as an internal reference. The nanoprobe color vividly changes from red to blue, enabling the direct visual detection. The linear concentration range is 0.15~50 μM with the detection limit of 67 nM. By virtue of the favorable selectivity and robust assays, the nanoprobe was applied to 6-MP detection in urine samples, with recoveries from 97.3 to 106% and relative standard deviations (RSD) less than 5%. Graphical abstract.

A Facile Colorimetric Sensor for 6-Mercaptopurine Based on Silver Nanoparticles

A facile colorimetric method was developed for detecting 6-mercaptopurine (6-MP) using silver nanoparticles (AgNPs). The addition of 6-MP to AgNPs led to the aggregation of AgNPs with a color change from yellow to brown. The ratio between the absorbance at 394 and 530 nm (A394/A530) was used for a quantitative analysis of 6-MP. A linear range of 0 - 0.5 μM was obtained with a detection limit of 10 nM. The developed method is cost-effective and simple.

Magnetic solid phase extraction based on poly(β-cyclodextrin-ester) functionalized silica-coated magnetic nanoparticles (NPs) for simultaneous extraction of the malachite green and crystal violet from aqueous samples

In this research, an efficient sorbent based on poly(β-cyclodextrin-ester)-functionalized silica-coated magnetic nanoparticles (MNPs-CDP) was prepared and used for magnetic solid-phase extraction of the malachite green (MG) and crystal violet (CV) from water samples prior to their determination by high-performance liquid chromatography-ultra violet detection (HPLC-UV). The synthesized nanoparticles were characterized by the field emission-scanning electron microscopy (FE-SEM) and Fourier transform infrared spectroscopy (FT-IR). Of course, the factors, which could influence the extraction efficiency like pH, sorbent amount, salt content, extraction time, desorption time, eluent type, and volume and sample volume, were optimized by response surface methodology. Then, for both of MG and CV, good linearity (0.1-200 μg L^-1, r² ≥ 0.99) was achieved under the optimized conditions. The limits of detection (LODs) and the limits of quantification (LOQs), for both of MG and CV, were 0.03 μg L^-1 and 0.1 μg L^-1, respectively. Precision of the method expressed as the relative standard deviations (RSDs) at concentration level of 100 μg L^-1 was 5.6 and 4.2 for MG and CV, respectively. Ultimately, usability of proposed method was investigated by analysis of CV and MG in tap water, fish pond water, and the lake water, and the satisfactory recoveries were obtained in the range of 92-100.5%.

Noble Metal Nanostructured Materials for Chemical and Biosensing Systems

Nanomaterials with unique physical and chemical properties have attracted extensive attention of scientific research and will play an increasingly important role in the future development of science and technology. With the gradual deepening of research, noble metal nanomaterials have been applied in the fields of new energy materials, photoelectric information storage, and nano-enhanced catalysis due to their unique optical, electrical and catalytic properties. Nanostructured materials formed by noble metal elements (Au, Ag, etc.) exhibit remarkable photoelectric properties, good stability and low biotoxicity, which received extensive attention in chemical and biological sensing field and achieved significant research progress. In this paper, the research on the synthesis, modification and sensing application of the existing noble metal nanomaterials is reviewed in detail, which provides a theoretical guidance for further research on the functional properties of such nanostructured materials and their applications of other nanofields.

Synthesis of a Novel Magnetically Retrievable Nanocomposite with Au Nanocatalysts for Hydration Reaction

Developing efficient catalysts with good recyclability is of great importance for its practical applications. In this study, a novel magnetically retrievable nanocomposite (Au-SiO2@Fe3O4-RGO) was synthesized for catalyzing hydration reaction. Active Au nanoparticles are deposited on core-shell SiO2@Fe3O4, which are further supported by a two-dimensional reduced graphene oxide (RGO) platform. The prepared Au-SiO2@Fe3O4-RGO was proven to be efficient as well as recyclable. An excellent catalytic performance, with 97% yield towards the hydration of phenylacetylene, was achieved for the catalyst in dioxane. Remarkably, the catalyst can be readily recycled through magnetic separation and achieved superior catalyst recovery and stability after seven cycles without any metal leaching. This work provides a strategy to fabricate recyclable and durable catalysts for industrial applications.

Dual-signal-amplified electrochemiluminescence biosensor for microRNA detection by coupling cyclic enzyme with CdTe QDs aggregate as luminophor

In this work, a dual-signal-amplified electrochemiluminescence (ECL) biosensor was proposed for the first time to detect microRNAs (miRNAs) based on cyclic enzyme and seeded-watermelon-like mesoporous nanospheres (mSiO₂@CdTe@SiO₂, mSQS NSs). mSQS NSs were successfully fabricated by inlaying the CdTe quantum dots (QDs) into the mesoporous silica (mSiO₂) and future coating the surface with the silica layer. The obtained mSQS NSs contained tens of QDs and exhibited much stronger ECL signal than single QDs. The ECL biosensor achieved firstly signal amplification by using mSQS NSs to label the functional oligonucleotide probe (DNA-F) as enhanced ECL signal probes. Well-dispersed Fe₃O₄@Au nanoparticles were prepared as immobilization matrices to load hairpin-structured DNA probe (DNA-P). When the target miRNAs were present, hairpin DNA undertook conformation changes. Meanwhile, RNA/DNA duplexes was formed which cleaved by duplex-specific nuclease (DSN) to release miRNAs. Target miRNAs were cycled to hybridize with hairpin DNA, which achieved secondly signal amplification of the ECL biosensor. Thereafter, the complementarily parts between DNA-F and the rest DNA-P generated conjugates. The obtained conjugates would be collected on the surface of the electrode by effecting of magnet. Under the optimal conditions, the developed biosensor showed a wide linear range from 0.1 pM to 100 pM with a low detection limit of 33 fM (S/N = 3). The results of detection for the stability, specificity and reproducibility of ECL biosensor were outstanding. Simultaneously, the potential application of ECL biosensor was verified by using biosensor in serum sample.

Nonenzymatic Amperometric Aptamer Cytosensor for Ultrasensitive Detection of Circulating Tumor Cells and Dynamic Evaluation of Cell Surface N-Glycan Expression

Dynamic assessment of glycan expression on the cell surface and accurate determination of circulating tumor cells are increasingly imperative for cancer diagnosis and therapeutics. Herein, a unique and versatile nonenzymatic sandwich-structured electrochemical cytosensor was developed. The cytosensor was constructed based on a cell-specific aptamer, the lectin-functionalized porous core-shell palladium gold nanoparticles (Pd@Au NPs). To establish the cytosensor, amine-modified-SYL3C aptamer was first attached to the surface of aminated Fe₃O₄@SiO₂ nanoparticles (Fe₃O₄@SiO₂-NH₂ NPs) through cross-linked reaction via glutaraldehyde. Besides, in terms of noncovalent assembly of concanavalin A on Pd@Au NPs, a lectin-functionalized nanoprobe was established. This nanoprobe had the capabilities of both the specific carbohydrate recognition and the current signal amplification in view of the Pd@Au NPs as the electrocatalyst for the reduction of hydrogen peroxide (H₂O₂). Herein, we used MCF-7 cells as a model target, and the constructed cytosensor showed a low detection limit (down to three cells), a wide linear detection ranging from 100 to 1 × 10⁶ cells mL^-1. The established method sensitively realized the detection of the amount of cell and exact evaluation of glycan expression on cell surface, demonstrating great application prospects.

A signal-decreased electrochemical immunosensor for the sensitive detection of LAG-3 protein based on a hollow nanobox-MOFs/AuPt alloy

In this work, hollow nanobox metal-organic framework (HNM) nanocomposites were synthesised and utilised for the first time in a signal decreased electrochemical immunosensor for the ultrasensitive quantitative determination of lymphocyte activation gene-3 (LAG-3) protein, which is a newly discovered biomarker. With the aid of signal materials, namely, SiO₂-tagged anti-LAG-3 antibody (SiO₂-Ab₂) and the biotin-streptavidin system, the sensor can achieve signal amplification. Encapsulation of tin dioxide-functionalised reduced graphene oxide (rGO-SnO₂) and gold and platinum alloys (AuPt alloys) onto the surface of hollow nanobox metal-organic frameworks (MOFs) was performed to prepare rGO-SnO₂/hollow nanobox-MOFs/AuPt alloys (rGO-SnO₂/HNMs/AuPt) as the matrix. SiO₂-Ab₂, which is used as the signal-decreased label, can be utilised to enhance the distinction of the electrochemical signal after the specific recognition between antibodies and antigens, owing to its large steric hindrance property. In this sensor, this proposed sandwich immunosensor can achieve a high sensitivity, especially in the presence of low concentrations of the LAG-3 protein. Under optimal conditions, this sandwich-designed immunosensor exhibited a sensitive detection of the LAG-3 protein from concentrations of 0.01 ng mL^-1 to 1 μg mL^-1, with a lower detection limit of 1.1 pg mL^-1 (based on 3σ). We proposed that this ultrasensitive biosensor can be utilised for the detection of the LAG-3 protein in early clinical tumour diagnosis.

Photovoltage response of (XZn)Fe2O4-BiFeO3 (X=Mg, Mn or Ni) interfaces for highly selective Cr3+, Cd2+, Co2+ and Pb2+ ions detection

High-photostability fluorescent (XZn)Fe₂O₄ (X=Mg, Mn or Ni) embedded in BiFeO₃ spinel-perovskite nanocomposites were successfully fabricated via a novel bio-induced phase transfer method using shewanella oneidensis MR-1. These nanocomposites have the near-infrared fluorescence response (XZn or Fe)-O-O-(Bi) interfaces (785/832nm), and the (XZn)Fe₂O₄/BiFeO₃ lattices with high/low potentials (572.15-808.77meV/206.43-548.1meV). Our results suggest that heavy metal ion (Cr³⁺, Cd²⁺, Co²⁺ and Pb²⁺) d↓ orbitals hybridize with the paired-spin X-Zn-Fe d↓-d↓-d↑↓ orbitals to decrease the average polarization angles (-29.78 to 44.71°), qualitatively enhancing the photovoltage response selective potentials (39.57-487.84meV). The fluorescent kinetic analysis shows that both first-order and second-order equilibrium adsorption isotherms are in line and meet the Langmuir and Freundlich modes. Highly selective fluorescence detection of Co²⁺, Cr³⁺ and Cd²⁺ can be achieved using Fe₃O₄-BiFeO₃ (Langmuir mode), (MgZn)Fe₂O₄-BiFeO₃ and (MnZn)Fe₂O₄-BiFeO₃ (Freundlich mode), respectively. Where the corresponding max adsorption capacities (q_max) are 1.5-1.94, 35.65 and 43.7 multiple, respectively, being more competitive than that of other heavy metal ions. The present bio-synthesized method might be relevant for high-photostability fluorescent spinel-perovskite nanocomposites, for design of heavy metal ion sensors.

Designed biocompatible nano-inhibitor based on poly(β-cyclodextrin-ester) for reduction of the DEHP migration from plasticized PVC

The easy migration of di(2-ethylhexyl) phthalate (DEHP) from the plasticized PVC (P-PVC) poses a serious threat to human health and the ecosystems. Thus, its control migration from the P-PVC products is very important. In this work, a poly(β-cyclodextrin-ester) network (β-CDP) was synthesized via reaction of β-cyclodextrin with 3,3',4,4'-benzophenone tetracarboxylic dianhydride. As a potential inhibitor for reduction of the DEHP migration, the β-CDP was grafted to Fe₃O₄ nanoparticles. Poly(β-cyclodextrin-ester) functionalized Fe₃O₄ nanoparticles (MNP-CDP) has been used in PVC/DEHP system as a reactive nano-inhibitor to reduce DEHP migration. Thermal stability and mechanical properties of obtained films were investigated. DEHP migration tests of the P-PVC films were also carried out by using Gas chromatography. It was found that by incorporating the small amounts of nano-inhibitor in PVC/DEHP system, the migration of DEHP effectively reduced from the P-PVC samples about 65% without any serious changes in mechanical and thermal properties of the P-PVC films.

Mechanism of Fluorescence Enhancement of Biosynthesized XFe2O4-BiFeO3 (X = Cr, Mn, Co, or Ni) Membranes

Ferrites-bismuth ferrite is an intriguing option for medical diagnostic imaging device due to its magnetoelectric and enhanced near-infrared fluorescent properties. However, the embedded XFO nanoparticles are randomly located on the BFO membranes, making implementation in devices difficult. To overcome this, we present a facile bio-approach to produce XFe₂O₄-BiFeO₃ (XFO-BFO) (X = Cr, Mn, Co, or Ni) membranes using Shewanella oneidensis MR-1. The perovskite BFO enhances the fluorescence intensity (at 660 and 832 nm) and surface potential difference (-469 ~ 385 meV and -80 ~ 525 meV) of the embedded spinel XFO. This mechanism is attributed to the interfacial coupling of the X-Fe (e^- or h⁺) and O-O (h⁺) interfaces. Such a system could open up new ideas in the design of environmentally friendly fluorescent membranes.

Fluorescence Probe Based on an Amino-Functionalized Fluorescent Magnetic Nanocomposite for Detection of Folic Acid in Serum

A new fluorescence probe constructed with a multifunctional nanocomposite, Fe₃O₄-ZnS:Mn²⁺/SiO₂-NH₂, was successfully synthesized and then used to detect folic acid in real serum samples. The nanocomposite was characterized by fluorescence spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray powder diffraction, and physical property measurement system. With the addition of analyte, the Fe₃O₄-ZnS:Mn²⁺/SiO₂-NH₂ composite and folic acid formed a new complex because cross-linking of the amino and carboxyl groups participated in the condensation reaction. Then, the energy of quantum dots was transferred to the complex and led to quenching of the fluorescence. Moreover, the fluorescence intensity decreased significantly as the concentration of folic acid increased, and the fluorescence quenching ratio F₀/F was related to the folic acid concentration in the range from 0.1 to 5 μg mL^-1. This method was used for detecting folic acid in real serum samples and gave recoveries in the range of 89.0%-96.0%, with relative standard deviations of 1.2%-3.9%. The detection limit was 9.6 ng mL^-1 (S/N = 3). These satisfactory and simple results showed the great potential of this fluorescence probe in the field of pharmaceutical analysis.

Electrochemical immunosensor for N6-methyladenosine detection in human cell lines based on biotin-streptavidin system and silver-SiO2 signal amplification

N6-methyladenosine (m6A), a kind of RNA methylation form and important epigenetic event, plays crucial roles in many biological progresses. Thus it is essential to quantitatively detect m6A in complicated biological samples. Herein, a simple and sensitive electrochemical method was developed for m6A detection using N6-methyladenosine-5'-triphosphate (m6ATP) as detection target molecule. In this detection strategy, anti-m6A antibody was selected as m6A recognition and capture reagent, silver nanoparticles and amine-PEG3-biotin functionalized SiO₂ nanospheres (Ag@SiO₂) was prepared and used as signal amplification label, and phos-tag-biotin played a vital role of "bridge" to link m6ATP and Ag@SiO₂ through the two forms of specific interaction between phosphate group of m6ATP and phos-tag, biotin and streptavidin, respectively. Under the optimal experimental conditions, the immunosensor presented a wide linear range from 0.2 to 500nM and a low detection limit of 0.078nM (S/N=3). The reproducibility and specificity were acceptable. Moreover, the developed method was also validated for detect m6A content in human cell lines. Importantly, this detection strategy provides a promising immunodetection platform for ribonucleotides and deoxyribonucleotides with the advantages of simplicity, low-costing, specificity and sensitivity.

Synthesizing a nano-composite of BSA-capped Au nanoclusters/graphitic carbon nitride nanosheets as a new fluorescent probe for dopamine detection

A strong red fluorescent nanocomposite, consisting of graphite-like carbon nitride nanosheets (g-C₃N₄ NSs) and serum albumin-capped Au nanoclusters (AuNCs), was synthesized. Dopamine (DA) can quench the red fluorescence of the nanocomposite, based on the Forster resonance energy transfer (FRET) mechanism. In this quenching process, the energy is transferred from the fluorescent g-C₃N₄ NSs-AuNCs to the oxidized DA quinine molecules (DA is easily oxidated to form DA quinine in air). The red fluorescence emission at 420 nm decreases dramatically and the quenching ratio (F₀ - F)/F₀ is linearly related to the concentration of DA in the range of 0.05-8.0 μmol L^-1 with a detection limit of 0.018 μmol L^-1 (S/N = 3). Additionally, this sensor has a potential of application to assay the DA in the real samples, such as human serum and human urine.

A sandwich-type electrochemical immunosensor for carcinoembryonic antigen based on signal amplification strategy of optimized ferrocene functionalized Fe₃O₄@SiO₂ as labels

A sandwich-type electrochemical immunosensor was developed for sensitive detection of carcinoembryonic antigen (CEA) by using ferroferric oxide@silica-amino groups (Fe3O4@SiO2-NH2) as carriers and gold nanoparticles-graphene oxide (GO-AuNPs) as platform. The Fe3O4@SiO2-NH2 surface was used as linked reagents for co-immobilization of ferrocenecarboxylic acid (Fc-COOH) and secondary anti-CEA (Ab2) to prepare the signal probe, and it also could hasten the decomposition of hydrogen peroxide (H2O2) to amplify signals. Differential pulse voltammetry (DPV) was successfully used to quantify CEA. Under the optimized conditions, the designed immunosensor shows an excellent analytical performance wide dynamic response range of CEA concentration from 0.001 ng mL(-1) to 80 ng mL(-1) with a relatively low detection limit of 0.0002 ng mL(-1) (S/N=3), and high specificity and good reproducibility. The proposed immunosensor was successfully used to determine CEA in spiked human serum samples.

A sensitive electrochemical aptasensor for multiplex antibiotics detection based on high-capacity magnetic hollow porous nanotracers coupling exonuclease-assisted cascade target recycling

A multiplex electrochemical aptasensor was developed for simultaneous detection of two antibiotics such as chloramphenicol (CAP) and oxytetracycline (OTC), and high-capacity magnetic hollow porous nanotracers coupling exonuclease-assisted target recycling was used to improve sensitivity. The cascade amplification process consists of the exonuclease-assisted target recycling amplification and metal ions encoded magnetic hollow porous nanoparticles (MHPs) to produce voltammetry signals. Upon the specific recognition of aptamers to targets (CAP and OTC), exonuclease I (Exo I) selectively digested the aptamers which were bound with CAP and OTC, then the released CAP and OTC participated new cycling to produce more single DNA, which can act as trigger strands to hybrid with nanotracers to generate further signal amplification. MHPs were used as carriers to load more amounts of metal ions and coupling with Exo I assisted cascade target recycling can amplify the signal for about 12 folds compared with silica based nanotracers. Owing to the dual signal amplification, the linear range between signals and the concentrations of CAP and OTC were obtained in the range of 0.0005-50 ng mL(-1). The detection limits of CAP and OTC were 0.15 and 0.10 ng mL(-1) (S/N=3) which is more than 2 orders lower than commercial enzyme-linked immunosorbent immunoassay (ELISA) method, respectively. The proposed method was successfully applied to simultaneously detection of CAP and OTC in milk samples. Besides, this aptasensor can be applied to other antibiotics detection by changing the corresponding aptamer. The whole scheme is facile, selective and sensitive enough for antibiotics screening in food safety.