In-situ assembly of biocompatible core-shell hierarchical nanostructures sensitized immunosensor for microcystin-LR detection

A disposable immunosensor array using cellulose paper assembled chemiresistive biosensor for simultaneous monitoring of mycotoxins AFB1 and FB1

Due to the common contamination of multiple mycotoxins in food, which results in stronger toxicity, it is particularly important to simultaneously test for various mycotoxins for the protection of human health. In this study, a disposable immunosensor array with low-cost was designed and fabricated using cellulose paper, polydimethylsiloxane (PDMS), and semiconducting single-walled carbon nanotubes (s-SWCNTs), which was modified with specific antibodies for mycotoxins AFB1 and FB1 detection. The strategy for fabricating the immunosensor array with two individual channels involved a two-step protocol starting with the form of two kinds of carbon films by depositing single-wall carbon nanotubes (SWCNTs) and s-SWCNTs on the cellulose paper as the conductive wire and sensing element, followed by the assembly of chemiresistive biosensor with SWCNTs strip as the wire and s-SWCNTs as the sensing element. After immobilizing AFB1-bovine serum albumin (AFB1-BSA) and FB1-bovine serum albumin (FB1-BSA) separately on the different sensing regions, the formation of mycotoxin-BSA-antibody immunocomplexes transfers to electrochemical signal, which would change with the different concentrations of free mycotoxins. Under optimal conditions, the immunosensor array achieved a limit of detection (LOD) of 0.46 pg/mL for AFB1 and 0.34 pg/mL for FB1 within a wide dynamic range from 1 pg/mL to 20 ng/mL. Furthermore, the AFB1 and FB1 spiked in the ground corn and wheat extracts were detected with satisfactory recoveries, demonstrating the excellent practicality of this established method for simultaneous detection of mycotoxins.

Development of an Open Droplet Microchannel-Based Magnetosensor for Immunofluorometric Assay of Trimethoprim in Chicken and Pork Samples with a Wide Linear Range

Trimethoprim (TMP), functioning as a synergistic antibacterial agent, is utilized in diagnosing and treating diseases affecting livestock and poultry. Human consumption of the medication indirectly may lead to its drug accumulation in the body and increase drug resistance due to its prolonged metabolic duration in livestock and poultry, presenting significant health hazards. Most reported immunoassay techniques, such as ELISA and immunochromatographic assay (ICA), find it challenging to achieve the dual advantages of high sensitivity, simplicity of operation, and a wide detection range. Consequently, an open droplet microchannel-based magnetosensor for immunofluorometric assay (OMM-IFA) of trimethoprim was created, featuring a gel imager to provide a signal output derived from the highly specific antibody (Ab) targeting trimethoprim. The method exhibited high sensitivity in chicken and pork samples, with LODs of 0.300 and 0.017 ng/mL, respectively, and a wide linear range, covering trimethoprim's total maximum residue limits (MRLs). Additionally, the spiked recoveries in chicken and pork specimens varied between 81.6% and 107.9%, maintaining an acceptable variation coefficient below 15%, aligning well with the findings from the ultraperformance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) technique. The developed method achieved a much wider linear range of about 5 orders of magnitude of 10-2-103 levels with grayscale signals as the output signal, which exhibited high sensitivity, excellent applicability and simple operability based on magnetic automation.

Split aptamer-based sandwich-type ratiometric biosensor for dual-modal photoelectrochemical and electrochemical detection of 17β-estradiol

BACKGROUND

As one of the most potent environmental estrogens, 17β-estradiol (E2), which can be enriched into organisms through the food chain and cause harmful biological effects in humans, has been frequently detected in the water environment of the world. High performance liquid chromatography (HPLC) and gas chromatograohy-mass spectrometry (GC/MS) have been widely used for quantification of E2. Despite excellent accuracy, tedious pretreatment and expensive instruments result in their limited application. It is clear that there is an urgent need to establish simple, sensitive and accurate methods for the determination of E2.

RESULTS

A split aptamer-based sandwich-type ratiometric biosensor based on split aptamer was developed by coupling photoelectrochemical and electrochemical assays for E2 detection. For analysis, the two fragments of split aptamer recognized E2 by forming sandwich structure, which triggered hybridization chain reaction (HCR) to produce double-stranded DNA (dsDNA) with CdTe quantum dots (QDs) labeled hairpin DNA. The resultant dsDNA can further absorb methylene blue (MB) to sensitize CdTe QDs for an enlarged photocurrent (IPEC) and output a redox current of IMB, and both of them acted as response signals for detection; [Fe(CN)6]3-/4- probe produced redox current of I[Fe(CN)6]3-/4- as reference signal. Using IMB/I[Fe(CN)6]3-/4- and IPEC/I[Fe(CN)6]3-/4- as yardsticks, the developed split aptamer-based sandwich-type ratiometric biosensor provides two linear ranges of 0.1-5000 pg mL-1 for IMB/I[Fe(CN)6]3-/4- and 0.1-10000 pg mL-1 for IPEC/I[Fe(CN)6]3-/4- with detection limits of 0.06 pg mL-1 and 0.02 pg mL-1, respectively.

SIGNIFICANCE

These results of the biosensor are benefiting from the coupling of photoelectrochemical (PEC) and electrochemical (EC) assays as well as the unique cooperative recognition mechanism of split aptamer. This method not only enabled the biosensor to be successfully applied to the determination of E2 in lake water, but also broadens the prospects for the realization of sensitive and accurate detection of E2.

Biosensors based on core-shell nanoparticles for detecting mycotoxins in food: A review

Mycotoxins are toxic metabolites produced by fungi in the process of infecting agricultural products, posing serious threat to the health of human and animals. Thus, sensitive and reliable analytical techniques for mycotoxin detection are needed. Biosensors equipped with antibodies or aptamers as recognition elements and core-shell nanoparticles (NPs) for the pre-treatment and detection of mycotoxins have been extensively studied. By comparison with monocomponent NPs, core-shell nanostructures exhibit unique optical, electric, magnetic, plasmonic, and catalytic properties due to the combination of functionalities and synergistic effects, resulting in significant improvement of sensing capacities in various platforms, such as surface-enhanced Raman spectroscopy, fluorescence, lateral flow immunoassay and electrochemical sensors. This review focused on the development of core-shell NPs based biosensors for the sensitive and accurate detection of mycotoxins in food samples. Recent developments were categorised and summarised, along with detailed discussion of advantages and shortcomings. The future potential of utilising core-shell NPs in food safety testing was also highlighted.

Shape-specific MOF-derived Cu@Fe-NC with morphology-driven catalytic activity: Mimicking peroxidase for the fluorescent- colorimetric immunosignage of ochratoxin

Ochratoxin A (OTA), which has strong hepatotoxicity and nephrotoxicity, can accumulate in the human body through the food chain; thus, the selective and effective detection of OTA is urgently required for food security. Nanozymes with hyperfine size and shape control have attracted attention because of their controllable structure and intrinsic activity. Herein, CuFe-bimetal coordinated N-doped carbon (Cu@Fe-NC) with morphology-driven peroxidase-mimicking activity was synthesized using Cu₂O with specific polygonal cubes and fully exposed {111} crystalline facets as the template to produce a CuFe-bimetallic metal organic framework (MOF) and further treating CuFe-MOF with high-temperature pyrolysis. N-doping can confer electronegativity to exhibit high affinity, while the large surface area of the porous carbon support can facilitate rapid adsorption-desorption equilibrium. Using the peroxidase-mimicking Cu@Fe_0.5-NC as a carrier, a versatile immunoassay for the detection of OTA was implemented based on the ratiometric fluorescence and the localized surface plasmon resonance peak shift, achieving a detection limit of 0.52 ng/L in the range of 0.001-10 μg/L. Therefore, the strategy of enhancing enzyme-mimicking activity using specific shapes and crystalline facets may open new avenues for food and environmental analysis.

Photoelectrochemical and visual dual-mode sensor for efficient detection of Cry1Ab protein based on the proximity hybridization driven specific desorption of multifunctional probe

Currently, the development of sensitive and visual strategy for Cry1Ab detection, particularly using a switchable dual-mode detection system based on a single component, remains a great challenge. Here, a photoelectrochemical (PEC) and visual dual-mode sensor was designed for Cry1Ab detection based on a proximity hybridization driven multifunctional probe. In the presence of Cry1Ab, specific desorption of the antibody-DNA conjugate was achieved via sufficient proximity hybridization, leading to the selective release of the multifunctional signal probe, i.e., antibody-labeled single-stranded DNA-gold nanoparticles (Ab₁-S1-AuNPs). The released Ab₁-S1-AuNPs reduced the photocurrent signal and produced a colored response, thereby achieving PEC and visual dual-mode detection based on a single component. Owing to the different signal generation mechanisms, two independent signals were obtained simultaneously, which provided self-verification to improve reliability and accuracy. Taking advantage of the PEC sensitive detection and visual prediction, the dual-mode sensor achieved efficient detection of the Cry1Ab protein. The developed sensor was successfully used to determine Cry1Ab in corn, wheat, and soil samples with satisfactory results. This method offers a promising biosensing platform for the on-site detection of Cry1Ab protein.

A novel ratiometric electrochemical aptasensor for highly sensitive detection of carcinoembryonic antigen

A novel ratiometric electrochemical aptasensor was proposed for carcinoembryonic antigen (CEA) detection based on exonuclease III (Exo III)-assisted recycling and rolling circle amplification (RCA) strategies. A thiolated ferrocene-labeled hairpin probe 2 (Fc-HP2) was fixed on the gold nanoparticles (AuNPs)-modified gold electrode (AuE) surface through Au-S bonds. The presence of CEA led to the release of trigger, which hybridized with the 3'-protruding of hairpin probe 1 (HP1) and triggered the Exo III cleavage reaction, accompanied by the releasing of trigger and generation of new DNA fragment which was used for the successive hybridization with Fc-HP2. After the Exo III cleavage process, the remaining Fc-HP2 fragments hybridized as primers with the RCA template to initiate the RCA process, and long single-stranded polynucleotides were produced for methylene blue (MB) binding. Such changes resulted in the signal of Fc (I_Fc) decreased and that of MB (I_MB) increased, achieving a linear relationship between I_MB/I_Fc and logarithm of CEA concentrations ranging from 1.0 pg mL^-1 to 100.0 ng mL^-1 with a detection limit of 0.59 pg mL^-1. Additionally, the developed aptasensor had been successfully applied to detect CEA in human serum samples. Therefore, the proposed strategy might provide a new platform for clinical detections of CEA.

Engineering the Signal Transduction between CdTe and CdSe Quantum Dots for in Situ Ratiometric Photoelectrochemical Immunoassay of Cry1Ab Protein

Controllable modulation of a response mode is extremely attracting to fabricate biosensor with programmable analytical performances. Here, we reported a proof-of-concept ratiometric photoelectrochemical (PEC) immunoassay of Cry1Ab protein based on the signal transduction regulation at the sensing interface. A sandwich-type PEC structure was designed so that gold nanorods sensitized quantum dots to fix primary antibody (Au NRs/QDs-Ab₁) and methylene blue sensitized QDs to combine a second antibody (MB/QDs-Ab₂), which served as photoelectric substrate and signal amplifier, respectively. Unlike common recognition element, such a sandwich-type PEC structure allowed for the in situ generation of two specific response signals. For analysis, Cry1Ab captured by Au NRs/QDs-Ab₁ led to a decreased photocurrent (I_Cry1Ab), while the subsequently anchored MB/QDs-Ab₂ produced another photocurrent (I_MB). Noteworthy, by taking advantage of the different energy band gaps of QDs, varying locations of CdTe and CdSe QDs could realize different signal transduction strategies (i.e., Mode 1 and Mode 2). Investigations on data analysis of I_Cry1Ab and I_MB via different routes demonstrated the superior analytical performances of ratiometry (Mode 1). Consequently, the ratiometric PEC immunosensor offered a linear range of 0.01-100 ng mL^-1 with a detection limit of 1.4 pg mL^-1. This work provides an efficient strategy for in situ collection of multiple photocurrents to design ratiometric PEC sensors.

Sensitive Identification of Microcystin-LR via a Reagent-Free and Reusable Electrochemical Biosensor Using a Methylene Blue-Labeled Aptamer

We report a methylene blue (MB)-modified electrochemical aptamer (E-AB) sensor for determining microcystin-LR (MC-LR). The signal transduction of the sensor was based on changes in conformation and position of MB induced by the binding between MC-LR and the modified aptamer probe. In the absence of MC-LR, an aptamer probe was considered partially folded. After combining aptamer and MC-LR, the configuration of the aptamer probe changed and facilitated the electron transfer between MB and the electrode surface. As a result, an increased current response was observed. We optimized the parameters and evaluated the electrochemical performance of the sensor using square wave voltammetry (SWV). MC-LR was measured from 1.0 to 750.0 ng/L with a detection limit of 0.53 ng/L. The reliability of the method was verified by the determination of MC-LR in environmental real samples, such as pond water and tap water. Moreover, we demonstrated that this reagent-less biosensor could be regenerated and reused after rinsing with deionized water with good accuracy and reproducibility. As a reusable and regenerable E-AB sensor, this rapid, reagent-free, and sensitive sensing platform will facilitate routine monitoring of MC-LR in actual samples.

Ratiometric electrochemical aptasensor for the sensitive detection of carcinoembryonic antigen based on a hairpin DNA probe and exonuclease I-assisted target recycling

A novel ratiometric electrochemical aptasensor was constructed for the detection of carcinoembryonic antigen (CEA) based on a hairpin DNA (hpDNA) probe and exonuclease Ⅰ (Exo Ⅰ)-assisted target recycling amplification strategy. A thiolated methylene blue (MB)-labeled hpDNA as the internal control element was fixed on the surface of the gold nanoparticles (AuNPs)-modified gold electrode (AuE) through Au-S bonds. A ferrocene (Fc)-modified aptamer DNA (Fc-Apt) was partially hybridized with hpDNA to form a Fc-Apt/hpDNA duplex. Due to the specific recognition of Fc-Apt to CEA, the presence of CEA caused dissociation of Fc-Apt from the duplex, and further triggered the degradation process of Exo Ⅰ and recycling of CEA. Hence, the Fc tags were released from the electrode surface and the oxidation peak current of Fc (I_Fc) decreased while that of MB (I_MB) remained stable owing to the distance between MB tags and the electrode unchanged. A linear relationship was observed between I_Fc/I_MB and the logarithm of CEA concentration from 10 pg mL^-1 to 100 ng mL^-1 with a detection limit of 1.9 pg mL^-1. Moreover, the developed aptasensor had been applied to detect CEA in diluted human serum with satisfactory results, indicating its great potential in practical applications.

Preparation of Fe3O4@PDA@Au@GO Composite as SERS Substrate and Its Application in the Enrichment and Detection for Phenanthrene

In this study, highly active Fe₃O₄@PDA@Au@GO surface-enhanced Raman spectroscopy (SERS) active substrate was synthesized for application in the enrichment and detection of trace polycyclic aromatic hydrocarbons (PAHs) in the environment. The morphology and structure were characterized by transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD) and UV–visible absorption spectrum (UV–vis spectra). The effect of each component of Fe₃O₄@PDA@Au@GO nanocomposites on SERS was explored, and it was found that gold nanoparticles (Au NPs) are crucial to enhance the Raman signal based on the electromagnetic enhancement mechanism, and apart from enriching the PAHs through π–π interaction, graphene oxide (GO) also generates strong chemical enhancement of Raman signals, and polydopamine (PDA) can prevent Au from shedding and agglomeration. The existence of Fe3O4 aided the quick separation of substrate from the solutions, which greatly simplified the detection procedure and facilitated the reuse of the substrate. The SERS active substrate was used to detect phenanthrene in aqueous solution with a detection limit of 10⁻⁷ g/L (5.6 × 10⁻¹⁰ mol/L), which is much lower than that of ordinary Raman, it is promising for application in the enrichment and detection of trace PAHs.

An intermolecular hydrogen-bond-induced quench-type Ru(dcbpy)32+/TPA electrochemiluminescence system by nitrogen-doped carbon quantum dots

Here, we show that nitrogen-doped carbon quantum dots (NCQDs) strongly inhibits the anodic electrochemiluminescence (ECL) signal of a tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) (Ru(dcbpy)₃²⁺)/tripropylamine (TPA) aqueous system. To determine the ECL-quenching mechanism, we used photoluminescence spectroscopy, UV-Visible absorption spectroscopy and dynamic simulation technology. Quenching of the ECL signal of Ru(dcbpy)₃²⁺/TPA by NCQDs was predominantly attributed to the interaction between Ru(dcbpy)₃²⁺ and NCQDs rather than that between TPA and NCQDs. Specifically, when Ru(dcbpy)₃²⁺ and NCQDs were in aqueous solution together, the carboxyl (-COOH) groups of Ru(dcbpy)₃²⁺ were in contact with oxygen- and nitrogen-containing groups on the surface of NCQDs and formed intermolecular hydrogen bonds. This process involved energy transfer from the excited-state Ru(dcbpy)₃²⁺ to the intermolecular hydrogen bonds, thus resulting in a decrease in the Ru(dcbpy)₃²⁺ ECL signal. On this basis, a quenching-type ECL sensor for the quantification of NCQDs was fabricated. The sensor had a wide linear range and an estimated detection limit of 0.0012 mg mL^-1, as well as excellent stability and selectivity. Satisfactory recoveries of 97.0-99.5% were obtained using the ECL sensor to quantify NCQDs in tap water. NCQDs could potentially be used as a quenching probe of Ru(dcbpy)₃²⁺ to construct various biosensors with widespread applications in the sensing field.

Recent developments in the methods of quantitative analysis of microcystins

Cyanotoxins are produced by the toxic cyanobacterial species present in algal blooms formed in water bodies due to nutrient over-enrichment by human influences and natural environmental conditions. Extensive studies are available on the most widely encountered cyanotoxins, microcystins (MCs) in fresh and brackish water bodies. MC contaminated water poses severe risks to human health, environmental sustainability, and aquatic life. Therefore, commonly occurring MCs should be monitored. Occasionally, detection and quantification of these toxins are difficult due to the unavailability of pure standards. Enzymatic, immunological assays, and analytical techniques like protein phosphatase inhibition assay, enzyme-linked immunosorbent assay, high-performance liquid chromatography, liquid chromatography-mass spectrometry, and biosensors are used for their detection and quantification. There is no single method for the detection of all the different types of MCs; therefore, various techniques are often combined to yield reliable results. Biosensor development offered a problem-solving approach in the detection of MCs due to their high accuracy, sensitivity, rapid response, and portability. In this review, an endeavor has been made to uncover emerging techniques used for the detection and quantification of the MCs.

Open Surface Droplet Microfluidic Magnetosensor for Microcystin-LR Monitoring in Reservoir

Establishing rapid, simple, and in situ detection of microcystin-LR (MC-LR) in drinking water sources is of significant importance for human health. To ease the situation that current methods cannot address, an open surface droplet microfluidic magnetosensor was designed and validated to quantify MC-LR in reservoir water, which is capable of (1) MC-LR isolation via MC-LR antibody-conjugated magnetic beads, (2) parallel and multistep analytical procedures in 15-array power-free and reusable active droplet microfluidic chips, (3) immunoassay incubation and fluorescence excitation within a miniaturized multifunctional 3D-printing optosensing accessory, and (4) signal read-out and data analysis by a user-friendly Android app. The proposed smartphone-based fluorimetric magnetosensor exhibited a low limit of detection of 1.2 × 10^-5 μg/L in the range of 10^-4 μg/L to 100 μg/L. This integrated and high throughput platform was utilized to draw an MC-LR contamination map for six reservoirs distributed in the Pearl River delta, Guangdong Province. It promises to be a simple and successful quantification method for MC-LR field detection, bringing many benefits to rapid on-site screening.

Multifunctional Magnetic-Fluorescent Nanoparticle: Fabrication, Bioimaging, and Potential Antibacterial Applications

Magnetic-fluorescent nanoparticles integrating imaging and therapeutic capabilities have unparalleled advantages in the biomedical applications. Apart from the dual ability of unique biomolecular fluorescent recognition and magnetic modes, the nanoparticle also endows combined effective therapies with high physiological stability, long-term imaging, rapid response time, and excellent circulation ability. Herein, we developed a carboxyl-functionalized magnetic nanoparticle that was further functionalized by polydopamine (PDA) and Schiff base ligand (3-aminopyridine-2-carboxaldehyde N(4)-methylthiosemicarbazone, HL) to form multilayered coating single nanoparticles (Fe₃O₄@PDA@HL). Our work showed that the aggregation-induced emission (AIE) effect could be produced by embedding In³⁺ into the Fe₃O₄@PDA@HL nanostructure, which offered a new opportunity for utilization as a fluorescent detection and therapeutic platform. Cellular fluorescent imaging experiments provided bacterial cell biodistribution, demonstrating their excellent luminescent performance, magnetic aggregation, and separation capability. We simultaneously confirmed that the synergistic antibacterial effect was closely related to both Fe₃O₄@PDA@HL and In³⁺, leading to the disruption of membrane integrity and the leakage of intracellular components, thus inducing bacterial death. This approach presented in our work could promote the development of future bioimaging and clinical therapy applications.

CdS quantum dots/Au nanoparticles/ZnO nanowire array for self-powered photoelectrochemical detection of Escherichia coli O157:H7

In this paper, the hydrothermally grown ZnO nanowire array (NWs) was modified by Au nanoparticles (NPs) and CdS quantum dots (QDs) to construct a high-performance photoelectrochemical (PEC) electrode. The aligned ZnO NWs, which decorated Au NPs and CdS QDs have the effective light absorption range from UV to visible region. This hybrid structure provided a self-powered PEC electrode with a favorable energy-band configuration for fast charge separation and transportation. Meanwhile, the Au NPs and CdS QDs also made increase of the surface area to improve the immobilization of the analytes. After assembling aptamer as recognition element, this composite nanoarray was further developed as a self-powered PEC biosensor by synergizing above multiple enhancement factors. The PEC aptasensor exhibited a rapid response in a wide linear range of 10-10⁷ CFU/mL with the detection limit as low as 1.125 CFU/mL to Escherichia coli O157:H7 (E. coli O157:H7). This approach would offer an alternative PEC transduction for fast environment monitoring and clinical diagnosis related to pathogenic bacteria.

Glypican-3 (GPC3) targeted Fe3O4 core/Au shell nanocomplex for fluorescence/MRI/photoacoustic imaging-guided tumor photothermal therapy

Low binding affinity and lack of therapy functions limit tumor targeting peptide applications in the biomedical field. Herein, we successfully modified a previous phage display derived Glypican-3 (GPC3) binding peptide (GBP) on the surface of a Fe₃O₄ Core/Au shell nanocomplex (FANP) to improve GBP binding affinity and enhance FANP tumor photothermal therapy (PTT) efficacy. As a result, GBP-FANP showed improved avidity to GPC-3 (Apparent K_d = 396.3 ± 70.8 nM) compared to that of GPB (Apparent K_d = 735.2 ± 53.6 nM). After intravenous administration, GBP-FANP was found specifically accumulated in GPC-3 positive HepG2 tumors and peaked at 24 h post-injection as observed by magnetic resonance imaging (MRI)/photoacoustic (PA)/fluorescent imaging. Moreover, HepG2 tumors that received GBP-FANP treatment were significantly inhibited with laser irradiation (630 nm, 1 W cm^-2, 10 min). In conclusion, our present strategy provides a way of improving peptide ligand avidity with nanotechnology for cancer theranostics applications.

A Comprehensive Review: Development of Electrochemical Biosensors for Detection of Cyanotoxins in Freshwater

Cyanobacteria harmful algal blooms are increasing in frequency and cyanotoxins have become an environmental and public concern in the U.S. and worldwide. In this Review, the majority of reported studies and developments of electrochemical affinity biosensors for cyanotoxins are critically reviewed and discussed. Essential background information about cyanobacterial toxins and electrochemical biosensors is combined with the rapidly moving development of electrochemical biosensors for these toxins. Current issues and future challenges for the development of useful electrochemical biosensors for cyanotoxin detection that meet the demands for applications in field freshwater samples are discussed. The major aspects of the entire review article in a prescribed sequence include (i) the state-of-the-art knowledge of the toxicity of cyanotoxins, (ii) important harmful algal bloom events, (iii) advisories, guidelines, and regulations, (iv) conventional analytical methods for determination of cyanotoxins, (v) electrochemical transduction, (vi) recognition receptors, (vii) reported electrochemical biosensors for cyanotoxins, (viii) summary of analytical performance, and (ix) recent advances and future trends. Discussion includes electrochemical techniques and devices, biomolecules with high affinity, numerous array designs, various detection approaches, and research strategies in tailoring the properties of the transducer-biomolecule interface. Scientific and engineering aspects are presented in depth. This review aims to serve as a valuable source to scientists and engineers entering the interdisciplinary field of electrochemical biosensors for detection of cyanotoxins in freshwaters.

Aptamer based ratiometric electrochemical sensing of 17β-estradiol using an electrode modified with gold nanoparticles, thionine, and multiwalled carbon nanotubes

Gold nanoparticles (AuNPs) with a size of ~3 nm were placed on a thionine-multiwalled carbon nanotube (Thi-CNTs) conjugate to form a novel AuNP-Thi-CNTs nanocomposite. Its morphology and composition were characterized by transmission electron microscopy, atomic force microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The nanocomposite was placed on an electrode and used as a redox-active signaling interface to fabricate a ratiometric electrochemical aptasensor for 17β-estradiol (E2). The potentiostatic insertion method was applied to insert an aptamer against E2 into a thin alkane monolayer to warrant an adequate distance between aptamers. The aptamer against E2 acts as both a collector and separator to specifically bind E2. The electrode displays two peak signals (at +0.50 V vs. SCE for E2; and at -0.32 V for Thi) which increase and decrease, respectively, in the 12 pM to 60 nM E2 concentration range. Therefore, the current ratio can be used to reliably, reproducibly, and sensitively quantify the concentration of E2. Graphical abstract Schematic presentation of a novel AuNP-Thi-CNTs nanocomposite. AuNP-Thi-CNTs showed good electrocatalytic oxidation to E2. AuNP-Thi-CNTs was used as self-redox signal interface to fabricate aptasensor. Dual signals of extrinsic E2 and inner Thi was applied to monitor the concentration of E2.

Magnetic nanoparticles for smart electrochemical immunoassays: a review on recent developments

This review (with 129 refs) summarizes the progress in electrochemical immunoassays combined with magnetic particles that was made in the past 5 years. The specifity of antibodies linked to electrochemical transduction (by amperometry, voltammetry, impedimetry or electrochemiluminescence) gains further attractive features by introducing magnetic nanoparticles (MNPs). This enables fairly easy preconcentration of analytes, minimizes matrix effects, and introduces an appropriate label. Following an introduction into the fundamentals of electrochemical immunoassays and on nanomaterials for respective uses, a large chapter addresses method for magnetic capture and preconcentration of analytes. A next chapter discusses commonly used labels such as dots, enzymes, metal and metal oxide nanoparticles and combined clusters. The large field of hybrid nanomaterials for use in such immunoassays is discussed next, with a focus on MNPs composites with various kinds of graphene variants, polydopamine, noble metal nanoparticles or nanotubes. Typical applications address clinical markers (mainly blood and urine parameters), diagnosis of cancer (markers and cells), detection of pathogens (with subsections on viruses and bacteria), and environmental and food contaminants as toxic agents and pesticides. A concluding section summarizes the present status, current challenges, and highlights future trends. Graphical abstract Magnetic nanoparticles (MNP) with antibodies (Ab) capture and preconcentrate analyte from sample (a) and afterwards become magnetically (b) or immunospecifically (c) bound at an electrode. Signal either increases due to the presence of alabel (b) or decreases as the redox probe is blocked (c).

A polyoxometalate-modified magnetic nanocomposite: a promising antibacterial material for water treatment

A polyoxometalate-modified magnetic nanocomposite integrates the double antibacterial effects of both Fe₃O₄ and polyoxometalate, rendering it a promising candidate as an antimicrobial material.

Electrochemical Biosensing of Algal Toxins in Water: The Current State-of-the-Art

Due to increasing stringency of water legislation and extreme consequences that failure to detect some contaminants in water can involve, there has been a strong interest in developing electrochemical biosensors for algal toxin detection during the past decade, evidenced by literature increasing from 2 journal papers pre-2009 to 24 between 2009 and 2018. In this context, this review has summarized recent progress of successful algal toxin detection in water using electrochemical biosensing techniques. Satisfactory detection recoveries using real environmental water samples and good sensor repeatability and reproducibility have been achieved, along with some excellent limit-of-detection (LOD) reported. Recent electrochemical biosensor literature in algal toxin detection is compared and discussed to cover three major design components: (1) biorecognition elements, (2) electrochemical read-out techniques, and (3) sensor electrodes and signal amplification strategy. The recent development of electrochemical biosensors has provided one more step further toward quick in situ detection of algal toxins in the contamination point of the water source. In the end, we have also critically reviewed the current challenges and research opportunities regarding electrochemical biosensors for algal toxin detection that need to be addressed before they attain commercial viability.

Dual-Modal Split-Type Immunosensor for Sensitive Detection of Microcystin-LR: Enzyme-Induced Photoelectrochemistry and Colorimetry

Microcystins, the lethal cyanotoxins from Microcystis aeruginosa, can inhibit the activity of protein phosphatase and promote liver tumors. Herein, a dual-modal split-type immunosensor was constructed to detect microcystin-LR (MC-LR), based on the photocurrent change of CdS/ZnO hollow nanorod arrays (HNRs) and the blue shift of the surface plasmon resonance peak from Au nanobipyramids@Ag. By using mesoporous silica nanospheres as the carrier to immobilize secondary antibody and DNA primer, a hybridization chain reaction was adopted to capture alkaline phosphatase, while its catalytic reaction product, ascorbic acid, exhibited dual functions. The detailed mechanism was investigated, showing that ascorbic acid can not only act as the electron donor to capture the holes in CdS/ZnO-HNRs, leading to the increase photocurrent, but also as the reductant to form silver shells on Au nanobipyramids, generating multiply vivid color variations and blue shifts. Compared with the traditional photoelectrochemical immunosensor or colorimetric method for MC-LR, a more accurate and reliable result can be obtained, due to different mechanisms and independent signal transduction. Therefore, this work can not only propose a new dual-modal immunosensor for MC-LR detection but also provide innovative inspiration for constructing sensitive, accurate, and visual analysis for toxins.

Fabrication of graphene film composite electrochemical biosensor as a pre-screening algal toxin detection tool in the event of water contamination

In this work, we fabricated a novel graphene film composite biosensor for microcystin-LR detection as an alternative to time-consuming, expensive, non-portable and often skills-demanding conventional methods of analysis involved in water quality monitoring and assessment. Excellent linear correlation (R² = 0.99) of the electron-transfer resistance was achieved over a wide range of microcystin-LR (MC-LR) concentration, i.e. 0.005–10 μg/L. As-prepared graphene film composite biosensors can specifically detect MC-LR with remarkable sensitivity and detection limit (2.3 ng/L) much lower than the World Health Organization (WHO) provisional guideline limit of microcystin-LR concentration (i.e. 1 μg/L) in different water sources. Their great potential can be attributed to large active surface area of graphene film and efficient charge transfer process enabled by their high conductivity. Developed graphene film composite biosensors were also successfully applied to determination of MC-LR in several environmental water samples with high detection recovery, which offers a promising possibility of large-scale manufacture of sensor tips due to their macroscopic free-standing nature, the scalable fabrication route and easily tunable size.

Photocatalytic degradation of microcystin-LR with a nanostructured photocatalyst based on upconversion nanoparticles@TiO2 composite under simulated solar lights

In this work, we prepared advanced upconversion nanoparticle coated with TiO₂ photocatalysts (NaYF₄:Yb,Tm@TiO₂) to utilize not only UV energy but also the large portion of NIR energy in order to improve the utilization efficiency of solar lights. The MC-LR (10 μg/mL) degradation rate can be approached 100% within 30 min at the concentration of NaYF₄:Yb,Tm@TiO₂ 0.4 mg/mL and initial pH value 4, while 61%, using pure TiO₂ (P25) under simulated solar lights. The reaction processes were studied and fitted with the pseudo-first-order kinetic model. Highly reactive hydroxyl radicals (•OH) were found to be the major reactive species. Meanwhile, seven degradation intermediates of MC-LR were examined by liquid chromatography/mass spectrometry and the degradation mechanism was analyzed. The main degradation pathways were proposed based on the molecular weight of the intermediates and the reaction mechanism are hydroxylation on the diene bonds and the aromatic ring of Adda. The products were evaluated to be nontoxic based on the construction of the intermediates. This study demonstrated that the NIR energy can be used as the driving source for photocatalysis besides the UV and the NIR-responsed photocatalysis had a high-efficiency and potential for MC-LR degradation.

Interaction of single-walled carbon nanotubes and saxitoxin: Ab initio simulations and biological responses in hippocampal cell line HT-22

Saxitoxins (STXs) are potent neurotoxins that also induce cytotoxicity through the generation of reactive oxygen species. Carbon nanotubes (CNTs) are nanomaterials that can promote a Trojan horse effect, facilitating the entry of toxic molecules to cells when adsorbed to nanomaterials. The interaction of pristine single-walled (SW)CNTs and carboxylated (SWCNT-COOH) nanotubes with STX was evaluated by ab initio simulation and bioassays using the cell line HT-22. Cells (5 × 10⁴  cells/mL) were exposed to SWCNT and SWCNT-COOH (5 μg mL^-1 ), STX (200 μg L^-1 ), SWCNT+STX, and SWCNT-COOH+STX for 30 min or 24 h. Results of ab initio simulation showed that the interaction between SWCNT and SWCNT-COOH with STX occurs in a physisorption. The interaction of SWCNT+STX induced a decrease in cell viability. Cell proliferation was not affected in any treatment after 30 min or 24 h of exposure (p > 0.05). Treatment with SWCNT-COOH induced high reactive oxygen species levels, an effect attenuated in SWCNT-COOH+STX treatment. In terms of cellular oxygen consumption, both CNTs when coexposed with STX antagonize the toxin effect. Based on these results, it can be concluded that the results obtained in vitro corroborate the semiempirical evidence found using density functional theory ab initio simulation. Environ Toxicol Chem 2017;36:1728-1737. © 2016 SETAC.

A novel fluorescent aptasensor for ultrasensitive detection of microcystin-LR based on single-walled carbon nanotubes and dapoxyl

To assure water safety and protect human health, precise and simple analytical approaches are highly desired to determine low concentrations of microcystin-leucine-arginine (MC-LR), a toxin, in both water and serum samples. Herein, a simple, rapid and accurate aptamer-based fluorescent sensor was used for selective recognition of MC-LR, based on single-walled carbon nanotubes (SWNTs) as immobilizers, dapoxyl as a fluorescent dye, DAP-10 as a specific aptamer for dapoxyl and unmodified MC-LR aptamer (Apt) as a sensing ligand. The sensing method was developed to produce a remarkable fluorescence intensity difference in the absence and presence of MC-LR. Moreover, the Apt was used without any modification. In the absence of MC-LR, the dapoxyl could bind to DAP-10, leading to a strong fluorescence intensity. In the presence of MC-LR, DAP-10 bound to the surface of SWNTs, resulting in a very weak fluorescence intensity. Under optimized conditions, the presented fluorescent analytical approach showed high selectivity toward MC-LR with a limit of detection (LOD) of 138 pM. This new method indicated excellent analytical performance for MC-LR detection in tap water and serum samples with LODs of 135 and 168 pM, respectively.

A rolling circle amplification signal-enhanced immunosensor for ultrasensitive microcystin-LR detection based on a magnetic graphene-functionalized electrode

Construction of a rolling circle amplification signal-enhanced immunosensor for ultrasensitive microcystin-LR detection by using a magnetic graphene functionalized electrode.