Paper-based biosensor relying on flower-like reduced graphene guided enzymatically deposition of polyaniline for Pb2+ detection

Cellulose Structures as a Support or Template for Inorganic Nanostructures and Their Assemblies

Cellulose is the most abundant natural polymer and deserves the special attention of the scientific community because it represents a sustainable source of carbon and plays an important role as a sustainable energent for replacing crude oil, coal, and natural gas in the future. Intense research and studies over the past few decades on cellulose structures have mainly focused on cellulose as a biomass for exploitation as an alternative energent or as a reinforcing material in polymer matrices. However, studies on cellulose structures have revealed more diverse potential applications by exploiting the functionalities of cellulose such as biomedical materials, biomimetic optical materials, bio-inspired mechanically adaptive materials, selective nanostructured membranes, and as a growth template for inorganic nanostructures. This article comprehensively reviews the potential of cellulose structures as a support, biotemplate, and growing vector in the formation of various complex hybrid hierarchical inorganic nanostructures with a wide scope of applications. We focus on the preparation of inorganic nanostructures by exploiting the unique properties and performances of cellulose structures. The advantages, physicochemical properties, and chemical modifications of the cellulose structures are comparatively discussed from the aspect of materials development and processing. Finally, the perspective and potential applications of cellulose-based bioinspired hierarchical functional nanomaterials in the future are outlined.

Recent advances of environmental pollutants detection via paper-based sensing strategy

Paper has become one of the most promising substrates for building low-cost and powerful sensing platforms due to its self-pumping ability and compatibility with multiple patterning methods. Paper-based sensors have been greatly developed in the field of environmental monitoring. In this review, we introduced the research and application of paper-based sensors in environmental monitoring, focusing on the deposition and patterning methods of building paper-based sensors, and summarized the applications of detecting environmental pollutants, including metal ions, anions, explosives, neurotoxins, volatile organic compounds, and small molecules. In addition, the development prospects and challenges of promoting paper-based sensors are also discussed. The current review will provide references for the construction of portable paper-based sensors, and has implications for the field of on-site real-time detection of the environment.

An ultrasensitive biosensor for dual-specific DNA based on deposition of polyaniline on a self-assembled multi-functional DNA hexahedral-nanostructure

Kras and Braf are major oncogenes. The mutation of Kras codon 12 or Braf V600E can lead to ovarian carcinoma. The detection of oncogene-related DNAs and their mutations offers solution for early diagnosis of ovarian cancer. Herein, a size-tunable multi-functional DNA hexahedral-nanostructure (DHN) has been rationally designed and modified on the electrode to response to Kras and Braf DNA. The size of DHN is controlled via polyadenines (polyA). The complete self-assembly of DHN depends on the presence of both target DNAs and two assistant probes. Meanwhile, a HRP-mimicking DNAzyme forms in DHN, which catalyzes the polymerization of aniline. The produced polyaniline is utilized as the output signal through differential pulse voltammetry (DPV). The biosensor shows the linear range from 100 fM to 1 μM, with the detection limit of 48.7 fM for Kras gene; and the linear range from 100 fM to 100 nM, with the detection limit of 44.1 fM for Braf gene, respectively. Since the current response depends on both gene sequences, the high specificity of the biosensor endows it to operate in an "OR"-type logic gate to discriminate the mutation of both genes. When Kras codon 12 or Braf V600E mutation happens, the response decreases significantly due to the incomplete formation of DNAzyme in DHN. The practicability of the biosensor has been verified through challenging human serum samples. Thus, it has great potential for clinical diagnosis of ovarian cancer through simultaneous detection of Kras and Braf genes and their mutations.

Enabling Molecular Gapping and Bridging on a Biosensing Surface via Electrochemical Cross-Linking and Cleavage

Protein detection in complicated biological samples requires robust design and a rigorous rinsing process. Many recently developed artificial targeting probes, however, often do not possess antibody-like binding strength that enables them to endure harsh biosensing conditions, and the classic 2-to-1 sandwich binding pattern is unavailable for many targets, often necessitating a complicated indirect signal conversion mechanism. Here, an attempt is made to provide innovative "covalent" solutions to such problems by employing peptide reactivity to form a covalent and robust biosensing structure upon target binding. Both the cross-coupling and cleavage of peptide chains are employed to achieve the classic 2-to-1 binding when only one targeting probe is available. Specifically, a targeting probe against the protein and a signaling probe are coimmobilized onto the sensing interface. The ratio between the two probes and their surface density is modulated so that direct cross-linking between the two immobilized probes is suppressed by the average distance between two such probes. Upon protein binding, the protein molecule may bridge that gap by itself. The signaling probe can carry any motif of signal amplification. And here a Cu-ion-complexed motif, which can exhibit peroxidase-like activity upon electrochemical agitation, is employed multipurposely as the catalyst for cross-linking, cleavage, and signal amplification. Three nonhomologous target proteins can be sensitively quantified in serum-spiked samples and clinical sample detection of one of them is also successful; these results suggest the potential of the proposed method in future clinical applications.

Advances in functional nucleic acid based paper sensors

This article provides an extensive review of paper-based sensors that utilize functional nucleic acids, particularly DNA aptamers and DNAzymes, as recognition elements.

Biotoxic trace metal ion detection by enzymatic inhibition of a glucose biosensor based on a poly(brilliant green)-deep eutectic solvent/carbon nanotube modified electrode

A highly sensitive glucose oxidase (GOx) electrochemical biosensor for the determination of the biotoxic trace metal ions Hg²⁺, Cd²⁺, Pb²⁺ and Cr^VI by enzyme inhibition has been developed. GOx was immobilized on a novel sensing platform consisting of poly(brilliant green) films formed by potential cycling electropolymerization in sulfuric acid doped ethaline deep eutectic solvent on multiwalled carbon nanotube modified glassy carbon electrodes. Polymer films produced in this medium presented more uniform morphology and better electrochemical sensing properties than those prepared in aqueous solution. The inhibitor concentration necessary to give 50% inhibition, I₅₀, was used for the determination of the type of reversible inhibition, and the relationship between I₅₀ and the inhibition constant K_i is discussed. The new biosensor was successfully used for the determination of biotoxic trace metal ions with a nanomolar limit of detection, lower than in the literature, very good repeatability, stability and selectivity, and was applied successfully to detection of the toxic trace metal species in milk samples.

A simple paper-based aptasensor for ultrasensitive detection of lead (II) ion

In this study, a simple paper-based aptasensor has been developed for the ultrasensitive detection of lead (Pb²⁺) ion within about 10 min. The aptasensor has been successfully designed by taking advantages of the Förster Resonance Energy Transfer (FRET) process and the super fluorescence quenching property of graphene oxide (GO) sheet. The sensing mechanism of the aptasensor is based on the conformational switch of the Pb²⁺-specific aptamer from a random coil to a G-quadruplex structure. An injection of Pb²⁺ on the paper-based platform induces the release of the specific aptamer from the GO surface that recovers the fluorescence emission. Under the optimal experimental conditions, there is a good linear relationship between the fluorescence recovery and the Pb²⁺concentration in the ranges of 5-70 pM and 0.07-20 nM. Moreover, the aptasensing array exhibits a high sensitivity to Pb²⁺ with an ultra-low detection limit of 0.5 pM. The developed aptasensor has been successfully applied to determine Pb²⁺ in tap water, lake water, milk, and human blood serum. The paper-based aptasensor can be efficiently utilized to detect other metal ions and biological molecules by substituting target specific aptamer.

Simultaneous detection and determination of mercury (II) and lead (II) ions through the achievement of novel functional nucleic acid-based biosensors

The serious threats of mercury (Hg²⁺) and lead (Pb²⁺) ions for the public health makes it important to achieve the detection methods of the ions with high affinity and specificity. Metal ions usually coexist in some environment and foodstuff or clinical samples. Therefore, it is very necessary to develop a fast and simple method for simultaneous monitoring the amount of metal ions, especially when Hg²⁺ and Pb²⁺ coexist. DNAzyme-based biosensors and aptasensors have been highly regarded for this purpose as two main groups of the functional nucleic acid (FNA)-based biosensors. In this review, we summarize the recent achievements of functional nucleic acid-based biosensors for the simultaneous detection of Hg²⁺ and Pb²⁺ ions in two main optical and electrochemical groups. The tremendous interest in utilizing the various nanomaterials is also highlighted in the fabrication of the FNA-based biosensors. Finally, some results are presented based on the advantages and disadvantages of the studied FNA-based biosensors to compare their validation.

Ultrasensitive Enzyme-free Biosensor by Coupling Cyclodextrin Functionalized Au Nanoparticles and High-Performance Au-Paper Electrode

Microfluidic paper-based analytical device (μPAD), originally developed for improving healthcare in developing countries, presents a simple yet powerful platform for performing low-cost and portable diagnostic devices. Here, we report an enzyme-free μPAD for the detection of two tumor markers. First, a porous structure of gold nanoparticle (AuNP)-modified paper working electrode (Au-PWE), with a feature of all-round conductivity and plenty of active sites favoring biological ligand attachment, was fabricated as a sensor substrate. Next, cyclodextrin functionalized AuNPs (CD@AuNPs) as dual mimicking enzyme were prepared to load secondary antibodies or peptide. On one sample zone, in the presence of carcinoembryonic antigen (CEA), CD@AuNPs could be introduced into the Au-PWE through a sandwich immunoreaction, boosting the electrochemical signal of o-phenylenediamine (o-PD) via the trigger of a cascade catalysis reaction toward glucose and o-PD, eventually resulting in the sensitive detection of CEA. On another working zone, with the introduction of another target prostate-specific antigen (PSA), peptide cleavage took place, which further led to CD@AuNPs being released from Au-PWE, and then, the variation of electrochemical signals was recorded for the detection of PSA. We demonstrated, using the device, that the detection of CEA and PSA clinically had high sensitivity, wide linear ranges, and low detection limits. We believe that our work provides a promising platform for point-of-care testing, especially in resource-limited regions.

QCM-nanomagnetic beads biosensor for lead ion detection

A QCM biosensor combined with NMBs has been proposed for Pb²⁺detection with a lower detection limit of 0.3 pM.

Using the Rubik's Cube to directly produce paper analytical devices for quantitative point-of-care aptamer-based assays

In this article, we describe a facile method named as Rubik's Cube stamping (RCS) for equipment-free fabrication of microfluidic paper-based analytical devices (μPADs). RCS is inspired by the worldwide ubiquitous RC toy and requires no specialized electric equipment other than a classical six-faced RC that is assembled with home-made small iron components. It can pattern various rosin microstructures in paper simply by either using different functional faces of the modified RC or applying its internal pivot mechanism to adjust the components' patterning forms on one functional face. Such a versatile stamping method is quite simple and inexpensive, and thus holds potential for producing rosin-patterned μPADs by untrained users in resource-limited environments such as small laboratories and private clinics, or even at home and in the field. Moreover, a set of one-channel devices are fabricated to design a point-of-care aptamer-based assay with near sample-in-answer-out capability that integrates enzymatic reactions for robust yet efficient signal amplification and a personal glucometer for portable, user-friendly, rapid and quantitative readout. Its utility is well demonstrated with the sensitive and specific detection of adenosine as a model target in buffer samples and undiluted human urine within several minutes. With the advantages of low cost, simplicity, portability, rapidity, and aptamer variety, this general point-of-care assay system reported here may find broad applications including home healthcare, field-based environmental monitoring or food analysis and emergency situations.

DNAzyme sensors for detection of metal ions in the environment and imaging them in living cells

The on-site and real-time detection of metal ions is important for environmental monitoring and for understanding the impact of metal ions on human health. However, developing sensors selective for a wide range of metal ions that can work in the complex matrices of untreated samples and cells presents significant challenges. To meet these challenges, DNAzymes, an emerging class of metal ion-dependent enzymes selective for almost any metal ion, have been functionalized with fluorophores, nanoparticles and other imaging agents and incorporated into sensors for the detection of metal ions in environmental samples and for imaging metal ions in living cells. Herein, we highlight the recent developments of DNAzyme-based fluorescent, colorimetric, SERS, electrochemical and electrochemiluminscent sensors for metal ions for these applications.

Nanomaterials-modified cellulose paper as a platform for biosensing applications

Recently, paper substrates have attracted tremendous interest from both academia and industry. Not only is paper highly abundant and portable, it is lightweight, disposable, easy-to-use, and can be rolled or folded into 3D configurations. More importantly, with a unique porous bulk structure and rough and absorptive surface properties, the construction of nanomaterials-functionalized cellulose has enabled cellulose paper to be applied for point-of-care (POC) paper devices with reasonably good performance at low cost. In this review, the latest advances in the modification of nanomaterials on paper cellulose are summed up. To begin with, the attractive properties of paper-based analytical devices are described. Then, fabricating methods for the functionalization of cellulose with diverse materials, including noble metals, bimetals, metal oxides, carbon nanomaterials, and molecular imprinting polymer nanoparticles, as well as their applications, are introduced in detail. Finally, the current critical issues, challenges, and future prospectives for exploring a paper-based analytical system based on nanomaterials-modified cellulose are discussed. It is believed that more strategies will be developed in the future to construct nanomaterials-functionalized cellulose, paving the way for the mass production of POC paper devices with a satisfactory performance.

Mesoscopic behaviour of multi-layered graphene: the meaning of supercapacitance revisited

The double layer capacitive phenomena is just a particular case of a more general quantum mechanical approach, wherein the electrochemical capacitance is central hence governing the super-capacitance phenomenology in general.

Enzymatic oligomerization and polymerization of arylamines: state of the art and perspectives

The literature concerning the oxidative oligomerization and polymerization of various arylamines, e.g., aniline, substituted anilines, aminonaphthalene and its derivatives, catalyzed by oxidoreductases, such as laccases and peroxidases, in aqueous, organic, and mixed aqueous organic monophasic or biphasic media, is reviewed. An overview of template-free as well as template-assisted enzymatic syntheses of oligomers and polymers of arylamines is given. Special attention is paid to mechanistic aspects of these biocatalytic processes. Because of the nontoxicity of oxidoreductases and their high catalytic efficiency, as well as high selectivity of enzymatic oligomerizations/polymerizations under mild conditions-using mainly water as a solvent and often resulting in minimal byproduct formation-enzymatic oligomerizations and polymerizations of arylamines are environmentally friendly and significantly contribute to a "green" chemistry of conducting and redox-active oligomers and polymers. Current and potential future applications of enzymatic polymerization processes and enzymatically synthesized oligo/polyarylamines are discussed.

Efficient On-Off Ratiometric Fluorescence Probe for Cyanide Ion Based on Perturbation of the Interaction between Gold Nanoclusters and a Copper(II)-Phthalocyanine Complex

A new ratiometric fluorescent sensor was developed for the sensitive and selective detection of cyanide ion (CN(-)) in aqueous media. The ratiometric sensing system is based on CN(-) modulated recovery of copper(II) phthalocyanine (Cu(PcTs)) fluorescence signal at the expense of diminished fluorescence intensity of gold nanoclusters (AuNCs). Preliminary experiments revealed that the AuNCs and Cu(PcTs) possess a turn-off effect on each other, the interaction of which being verified through studying their interactions by principle component analysis (PCA) and multivariate cure resolution-alternating least-squares (MCR-ALS) methods. In the presence of CN(-) anion, the AuNCs and Cu(PcTs) interaction was perturbed, so that the fluorescence of Cu (PcTs), already quenched by AuNCs, was found to be efficiently recovered, while the fluorescence intensity of AuNCs was quenched via the formation of a stable [Au(CN)2](-) species. The ratiometric variation of AuNCs and Cu(PcTs) fluorescence intensities leads to designing a highly sensitive probe for CN(-) ion detection. Under the optimal conditions, CN(-) anion was detected without needing any etching time, over the concentration range of 100 nM-220 μM, with a detection limit of 75 nM, which is much lower than the allowable level of CN(-) in water permitted by the World Health Organization (WHO). Moreover, the detection of CN(-) was developed based on the CN(-) effects on the blue and red florescent colors of Cu(PcTs) and AuNCs, respectively. The designed probe displays a continuous color change from red to blue by addition of CN(-), which can be clearly observed by the naked eye in the range of 7-350 μM, under UV lamp. The prepared AuNCs/Cu(PcTs) probe was successfully utilized for the selective and sensitive determination of CN(-) anion in two different types of natural water (Rodbal dam and rainwater) and also in blood serum as a biological sample.