Recent advances in graphene-based nanomaterials for fabricating electrochemical hydrogen peroxide sensors

Graphene-Enhanced Refreshable Metasurface Expands Analytes of THz Label-Free Sensing and Achieves Picogram Limit of Detection

THz sensing offers unique advantages including strong penetrability, low photon energy, and specific recognition of biomolecules and chemicals. However, current label-free THz sensors all operate below 1 THz, severely limiting applications as many drugs and chemicals vibrate at higher THz frequencies. Moreover, the THz detection of analytes at picogram levels is challenging. Here, a modern graphene-enhanced THz metasurface label-free sensor is presented. Its tunable resonance from ∼1.8 to 2.6 THz matches the fingerprint resonant frequencies of various analytes not currently detectable by label-free THz sensing. Quantitative detection of trace 1,3-DNB (absorbing at ∼2.52 THz) is first achieved with a maximum reflectance sensitivity of ∼10% pmol-1 and a detection limit of 42 pg. The sensor can also be refreshed, minimizing cost and being more environmentally friendly. Our strategy expands application scenarios of label-free THz sensing, enhancing its potential in fields such as the pharmaceutical industry, environmental monitoring, and security.

Multi-responsive biosensor prepared based on MXene and PDEA-HRP binary architecture films for H2O2 detection and logic gate construction

The quantitative detection of H2O2 is of great significance for preventing the occurrence of diseases. In this work, an electrochemical biosensor for detecting H2O2 was constructed through a step-by-step modification method. The PDEA-HRP/MXene/PG biosensor (PDEA = poly(N,N-dimethyl acrylamide), HRP = horseradish peroxidase, PG = pyrolytic graphite) was prepared with two-dimensional metal carbide (MXene) nano materials as the inner layer and PDEA-HRP hydrogel as the outer layer for the detection of H2O2. Due to the excellent conductivity and biocompatibility of MXene materials, the prepared PDEA-HRP/MXene/PG biosensors have high sensitivity, wide linear range, and good repeatability. The results indicated that under optimal conditions, the prepared biosensor can detect H2O2 concentration within a linear range of 0.04 mM ∼ 1.80 mM, with the detection limit of 1.08 × 10-3 mM (S/N = 3). The detection effect was good in actual samples. In addition, based on the switching properties of PDEA-HRP hydrogel under different conditions, combined with the characteristics of MXene nanomaterials. This study also constructed several biomolecule electrocatalytic logic gate systems, including binary 5-Input/5-Output logic gate network, 2-to-4 decoder, and a ternary AND logic gates.

Hydrogel patch doped with nanoenzyme for SERS detection of hydrogen peroxide in complex body fluids

Abnormally elevated levels of H2O2 in body fluids are strongly correlated with various diseases, particularly cancers. Consequently, there is a significant need to develop a simple and efficient method for direct detection of H2O2 in body fluids. This study presents an economical and feasible hydrogel patch doped with nanoenzyme, specifically gold nanoparticles assembled on the surface of magnetic nanoparticles (Au@Fe3O4 NPs), as a sensing platform for H2O2 in complex body fluids. The hydrogel surface-enhanced Raman spectroscopy (SERS) patch demonstrates ultra-high sensitivity for H2O2 in vitro with a detection limit of 10 nM, which is attributed to the excellent catalytic efficiency of Au@Fe3O4 NPs and the rich distribution of SERS "hot spots" on the nanoenzyme. Notably, the hydrogel SERS patch exhibits superior specificity, repeatability, and background-free detection of H2O2 in complex body fluids without pre-treatment. Importantly, the H2O2 levels within cancerous cells were observed to gradually increase during the cell death process, as measured using the hydrogel SERS patch developed for practical application. This SERS patch provides a promising, cost-effective strategy for H2O2 detection in complex samples such as body fluids, food, and environmental samples in future applications.

Preparation of ultra-sensitive and selective hydrogen peroxide-based colorimetric sensor using highly exfoliated g-C3N4 nanosheets with peroxidase-like activity

A highly sensitive, portable, rapid, and accurate colorimetric sensing method is presented. It is based upon exfoliated g-C3N4 nanosheets (E-g-C3N4 NSs), having peroxidase nanozyme-like properties. The as-prepared catalyst (E-g-C3N4 NSs) tends to oxidize the colorless tetramethyl-benzidine (TMB) into oxidized-TMB in the presence of hydrogen peroxide (H2O2) generating a dark blue color and corresponding ultraviolet visible-spectral changes following a Michaelis-Menten kinetic. The prepared colorimetric sensor exhibited response within the range 0.001-0.450 μM having R2 value of 0.999 and a detective limit (LOD) of 0.15 ± 0.04 nM. Furthermore, the sensor also displayed outstanding selectivity, ample stability (10 weeks), and excellent practicability in real sample applications. All these outstanding properties were highly attributed to the large surface area with exposed actives sites, high surface energy, and large conductive structure of E-g-C3N4 NSs. For comparison of the catalytic study, we have also explored the sensing mechanism of B-g-C3N4, using the same optimized experimental conditions. Resultantly, we concluded that the proposed sensor (E-g-C3N4 NSs) will gain considerable attention for on-site environmental and health monitoring in future endeavor.

DNA Framework-Templated Synthesis of Copper Cluster Nanozyme with Enhanced Activity and Specificity

Nanozymes have been developed to overcome the inherent limitations of natural enzymes, such as their low stability and high cost. However, their efficacy has been hindered by their relatively low specificity and activity. Here, we demonstrate the self-assembly of individual copper nanoclusters (CuNCs) via a simple yet fast (10 min) DNA nanosheet (DNS)-templated method, enhancing the peroxidase-like activity and specificity of CuNCs. Furthermore, we demonstrate the successful assembly of CuNCs on different DNA nanostructures by atomic force microscopy (AFM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The resulting micron-scale ultrathin DNA nanosheet-templated CuNCs (DNS@CuNCs) exhibit exceptional catalytic activity, with a specific activity reaching 1.79 × 103 U mg-1. Investigation into the catalytic process reveals that the enhanced activity and specificity arise from disparities in active intermediate content before and after CuNCs assembly. Significantly, the DNS@CuNCs-based biosensor demonstrates remarkable anti-interference capabilities, enabling the detection of H2O2 in undiluted human serum for the first time with a detection limit of 0.99 μM.

Investigating the electronic properties of edge glycine/biopolymer/graphene quantum dots

This study systematically investigated four types of graphene quantum dots (GQDs) AHEX, ZTRI, ZHEX, and ATRI, and their interactions with glycine to form GQD-glycine complexes. Utilizing density functional theory (DFT) and the PM6 semiempirical method, the study analyzed electronic properties and structure-activity relationships. Global reactivity indices were calculated using Koopmans' theorem, and quantitative structure-activity relationship (QSAR) parameters were assessed via SCIGRESS 0.3. The study further explored interactions using density of states (DOS) and quantum theory of atoms in molecules (QTAIM) analyses. Key findings revealed that glycine interaction significantly increased the total dipole moment (TDM) and decreased the HOMO/LUMO energy gap (ΔE) for the GQD-glycine complexes. Notably, ZTRI/glycine showed a TDM of 4.535 Debye and a reduced ΔE of 0.323 eV, indicating enhanced reactivity. Further interactions with cellulose, chitosan, and sodium alginate identified the ZTRI/glycine/sodium alginate composite as the most reactive, with a TDM of 8.020 Debye and the lowest ΔE of 0.200 eV. This composite also exhibited the highest electrophilicity index (56.421) and lowest chemical hardness (0.145 eV), underscoring its superior reactivity and stability. DOS analysis revealed that biomolecules contributed the most to molecular orbitals, with carbon atoms contributing the least. QTAIM analysis confirmed the greater stability of the ZTRI/glycine/sodium alginate complex compared to other studied composites. These results highlight the enhanced reactivity and stability of GQDs when interacting with glycine and sodium alginate.

Macromolecule-Nanoparticle-Based Hybrid Materials for Biosensor Applications

Biosensors function as sophisticated devices, converting biochemical reactions into electrical signals. Contemporary emphasis on developing biosensor devices with refined sensitivity and selectivity is critical due to their extensive functional capabilities. However, a significant challenge lies in the binding affinity of biosensors to biomolecules, requiring adept conversion and amplification of interactions into various signal modalities like electrical, optical, gravimetric, and electrochemical outputs. Overcoming challenges associated with sensitivity, detection limits, response time, reproducibility, and stability is essential for efficient biosensor creation. The central aspect of the fabrication of any biosensor is focused towards forming an effective interface between the analyte electrode which significantly influences the overall biosensor quality. Polymers and macromolecular systems are favored for their distinct properties and versatile applications. Enhancing the properties and conductivity of these systems can be achieved through incorporating nanoparticles or carbonaceous moieties. Hybrid composite materials, possessing a unique combination of attributes like advanced sensitivity, selectivity, thermal stability, mechanical flexibility, biocompatibility, and tunable electrical properties, emerge as promising candidates for biosensor applications. In addition, this approach enhances the electrochemical response, signal amplification, and stability of fabricated biosensors, contributing to their effectiveness. This review predominantly explores recent advancements in utilizing macrocyclic and macromolecular conjugated systems, such as phthalocyanines, porphyrins, polymers, etc. and their hybrids, with a specific focus on signal amplification in biosensors. It comprehensively covers synthetic strategies, properties, working mechanisms, and the potential of these systems for detecting biomolecules like glucose, hydrogen peroxide, uric acid, ascorbic acid, dopamine, cholesterol, amino acids, and cancer cells. Furthermore, this review delves into the progress made, elucidating the mechanisms responsible for signal amplification. The Conclusion addresses the challenges and future directions of macromolecule-based hybrids in biosensor applications, providing a concise overview of this evolving field. The narrative emphasizes the importance of biosensor technology advancement, illustrating the role of smart design and material enhancement in improving performance across various domains.

Flexible Graphene Paper Modified Using Pt&Pd Alloy Nanoparticles Decorated Nanoporous Gold Support for the Electrochemical Sensing of Small Molecular Biomarkers

The exploration into nanomaterial-based nonenzymatic biosensors with superb performance in terms of good sensitivity and anti-interference ability in disease marker monitoring has always attained undoubted priority in sensing systems. In this work, we report the design and synthesis of a highly active nanocatalyst, i.e., palladium and platinum nanoparticles (Pt&Pd-NPs) decorated ultrathin nanoporous gold (NPG) film, which is modified on a homemade graphene paper (GP) to develop a high-performance freestanding and flexible nanohybrid electrode. Owing to the structural characteristics the robust GP electrode substrate, and high electrochemically catalytic activities and durability of the permeable NPG support and ultrafine and high-density Pt&Pd-NPs on it, the resultant Pt&Pd-NPs-NPG/GP electrode exhibits excellent sensing performance of low detection limitation, high sensitivity and anti-interference capability, good reproducibility and long-term stability for the detection of small molecular biomarkers hydrogen peroxide (H2O2) and glucose (Glu), and has been applied to the monitoring of H2O2 in different types of live cells and Glu in body fluids such as urine and fingertip blood, which is of great significance for the clinical diagnosis and prognosis in point-of-care testing.

Simultaneous detection of norepinephrine and 5-hydroxytryptophan using poly-alizarin/multi-walled carbon nanotubes-graphene modified carbon fiber microelectrode array sensor

Multi-walled carbon nanotubes, graphene and alizarin polymer composites coated carbon fiber microelectrode array sensor (p-AZ/MWCNT-GR/CFMEA) was constructed and used for the simultaneous detection of norepinephrine (NE) and 5-hydroxytryptophan (5-HT). The morphology and structural characteristics of sensor are characterized using scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction. Its electrochemical behavior has been studied with cyclic voltammetry and electrochemical impedance spectroscopy. The sensor exhibits excellent electrochemical activity for the oxidation of NE and 5-HT, two well separated oxidation peaks with the peak potential difference of 220 mV are observed on the cyclic voltammogram. NE and 5-HT both show two electrons and two protons electrochemical reaction on the p-AZ/MWCNT-GR/CFMEA. Under the optimized experiment conditions, the linear ranges of the sensor for NE and 5-HT are 0. 08- 8 μM and 0. 1-20 μM with detection limits of 4. 22 nM and 14. 2 nM (S/N = 3), respectively. In addition, the microsensor array show good reproducibility, stability and selectivity for the determination of NE and 5-HT. Finally, the p-AZ/MWCNT-GR/CFMEA is applied to the simultaneous detection of NE and 5-HT in human serum samples and macrophages.

An Overview of Electrochemical Sensors Based on Transition Metal Carbides and Oxides: Synthesis and Applications

Sensors play vital roles in industry and healthcare due to the significance of controlling the presence of different substances in industrial processes, human organs, and the environment. Electrochemical sensors have gained more attention recently than conventional sensors, including optical fibers, chromatography devices, and chemiresistors, due to their better versatility, higher sensitivity and selectivity, and lower complexity. Herein, we review transition metal carbides (TMCs) and transition metal oxides (TMOs) as outstanding materials for electrochemical sensors. We navigate through the fabrication processes of TMCs and TMOs and reveal the relationships among their synthesis processes, morphological structures, and sensing performance. The state-of-the-art biological, gas, and hydrogen peroxide electrochemical sensors based on TMCs and TMOs are reviewed, and potential challenges in the field are suggested. This review can help others to understand recent advancements in electrochemical sensors based on transition metal oxides and carbides.

Carbon dots-based fluorescence enhanced probe for the determination of glucose

In this work, a novel "turn-on" fluorescence sensor for the detection of H2O2 and glucose was developed based on green fluorescent carbon dots (CDs). The CDs was newly prepared by a facile one-pot hydrothermal method with Eosin Y and branched polyethylenimine as precursors. Interestingly, in the presence of H2O2 and HRP, the fluorescence of the CDs enhanced significantly with a red-shift emission due to their "aggregation". Meanwhile, the oxidation of glucose catalyzed by glucose oxidase could generate H2O2. Thus, a simple sensing system based on the CDs as fluorescent probes was constructed for H2O2 and glucose determination, avoiding the fluorescence quenching and subsequent recovery process in conventional turn-on strategy. The method showed good selectivity and sensitivity for glucose sensing with the detection limit of 0.12 μM. The method was further applied to glucose detection in real samples. The obtained results demonstrated the simplicity, selectivity and practicality of the method. This work expands the carbon nanomaterials with fluorescence emission enhancement properties. It provides a new and direct "turn-on" strategy for H2O2 and glucose detection, which could be a simple and effective tool for screening biological substances involved in H2O2-generation reaction.

Co-assembly of graphene/polyoxometalate films for highly electrocatalytic and sensing hydroperoxide

Graphene oxide (GO) films mixed with polyethylenimine (PEI) were prepared by a layer-by-layer assembly (LBL) method, in which the GO component is then converted to reduced GO (rGO) in situ through an electron transfer interaction with a polyoxometalate (POM) that is assembled on the outer surface. With this, devices were manufactured by spreading composite films of (PEI/rGO)_n-POM with different numbers of PEI/rGO layers on ITO substrates. Cyclic voltammetry (CV) reveals that the catalytic activity for H₂O₂ of (PEI/rGO)_n-POM films was significantly higher than that of similar films of (PEI/GO)_n/PEI/POM manufactured LBL with the same number of layers, although the catalyst POM content of (PEI/rGO)_n-POM was only half that of (PEI/GO)_n/PEI/POM. The catalytic activity of (PEI/rGO)_n-POM films first increases and then decreases as the number of PEI/rGO layers increases. The result shows that (PEI/rGO)₃-POM films with three PEI/rGO layers exhibit the highest efficiency. Amperometric measurements of the (PEI/rGO)₃-POM films showed improved current response, high sensitivity, wide linear range, low detection limit, and fast response for H₂O₂ detection. The enhanced catalytic property of (PEI/rGO)_n-POM films is attributed to the electron transfer interaction and electrostatic interaction between POM and rGO.

Innovations in the synthesis of graphene nanostructures for bio and gas sensors

Sensors play a significant role in modern technologies and devices used in industries, hospitals, healthcare, nanotechnology, astronomy, and meteorology. Sensors based upon nanostructured materials have gained special attention due to their high sensitivity, precision accuracy, and feasibility. This review discusses the fabrication of graphene-based biosensors and gas sensors, which have highly efficient performance. Significant developments in the synthesis routes to fabricate graphene-based materials with improved structural and surface properties have boosted their utilization in sensing applications. The higher surface area, better conductivity, tunable structure, and atom-thick morphology of these hybrid materials have made them highly desirable for the fabrication of flexible and stable sensors. Many publications have reported various modification approaches to improve the selectivity of these materials. In the current work, a compact and informative review focusing on the most recent developments in graphene-based biosensors and gas sensors has been designed and delivered. The research community has provided a complete critical analysis of the most robust case studies from the latest fabrication routes to the most complex challenges. Some significant ideas and solutions have been proposed to overcome the limitations regarding the field of biosensors and hazardous gas sensors.

The Biomass of Pig-Blood-Derived Carbon as a Novel Electrode Material for Hydrogen Peroxide Electrochemical Sensing

In the work, a pig-blood-derived mesoporous carbon (BC) was prepared as a novel Fe-N-C material for the electrochemical sensor to detect hydrogen peroxide. Because of the unique nanostructure of Fe-BCs with rough surface structure, hierarchical pores, and high graphitization degree, the Fe-BCs, as a kind of advanced electrode material, exhibited remarkable performance in electrocatalysis. The sensor based on Fe-BCs exhibited an extra-long range from c and a detection limit of 0.046 μM (S/N = 3). The synthesis of low-cost, advanced carbon-based electrode materials from environmentally friendly pig blood for electrochemical sensor construction is a promising approach.

Electrochemical detection of hydrogen peroxide using micro and nanoporous CeO2 catalysts

In this research work, focus has been made on a glassy carbon electrode (GCE) modified commercial micro and synthesized nano-CeO₂ for the detection of hydrogen peroxide (H₂O₂). Firstly, CeO₂ nanoleaves were prepared by solvothermal route. Both commercially available micro CeO₂ and synthesized nano-CeO₂ structures were analyzed by different characterization techniques. The Raman spectra of synthesized nano CeO₂ has more oxygen vacancies than micro CeO₂. SEM images revealed that the synthesized CeO₂ acquired leaf-like morphology. The catalyst nano CeO₂ offered mesoporosity from nitrogen adsorption-desorption isotherms with massive sites of activation for increasing efficiency. Experiments on determining H₂O₂ using micro CeO₂ or nano-CeO₂/GCE was conducted using cyclic voltammetry (CV) and amperometry. Enhanced H₂O₂ reduction peak current with lower potential was observed in nano-CeO₂/GCE. The influence of scan rate and H₂O₂ concentration on the performance of nano-CeO₂/GCE were also studied. The obtained results have indicated that nano-CeO₂/GCE showed improved electrochemical sensing behavior towards the reduction of H₂O₂ than micro-CeO₂/GCE and bare GCE. A linear relationship was obtained over 0.001 μM-0.125 μM concentration of H₂O₂, with good sensitivity 141.96 μA μM^-1 and low detection limit of 0.4 nM. Hence, the present nano-CeO₂ system will have a great potential with solvothermal synthesis approach in the development of electrochemical sensors.

Electrochemical Quantification of H2O2 Released by Airway Cells Growing in Different Culture Media

Quantification of oxidative stress is a challenging task that can help in monitoring chronic inflammatory respiratory airway diseases. Different studies can be found in the literature regarding the development of electrochemical sensors for H2O2 in cell culture medium to quantify oxidative stress. However, there are very limited data regarding the impact of the cell culture medium on the electrochemical quantification of H2O2. In this work, we studied the effect of different media (RPMI, MEM, DMEM, Ham's F12 and BEGM/DMEM) on the electrochemical quantification of H2O2. The used electrode is based on reduced graphene oxide (rGO) and gold nanoparticles (AuNPs) and was obtained by co-electrodeposition. To reduce the electrode fouling by the medium, the effect of dilution was investigated using diluted (50% v/v in PBS) and undiluted media. With the same aim, two electrochemical techniques were employed, chronoamperometry (CH) and linear scan voltammetry (LSV). The influence of different interfering species and the effect of the operating temperature of 37 °C were also studied in order to simulate the operation of the sensor in the culture plate. The LSV technique made the sensor adaptable to undiluted media because the test time is short, compared with the CH technique, reducing the electrode fouling. The long-term stability of the sensors was also evaluated by testing different storage conditions. By storing the electrode at 4 °C, the sensor performance was not reduced for up to 21 days. The sensors were validated measuring H2O2 released by two different human bronchial epithelial cell lines (A549, 16HBE) and human primary bronchial epithelial cells (PBEC) grown in RPMI, MEM and BEGM/DMEM media. To confirm the results obtained with the sensor, the release of reactive oxygen species was also evaluated with a standard flow cytometry technique. The results obtained with the two techniques were very similar. Thus, the LSV technique permits using the proposed sensor for an effective oxidative stress quantification in different culture media and without dilution.

Bacterial Peroxidase on Electrochemically Reduced Graphene Oxide for Highly Sensitive H2 O2 Detection

Peroxidase enzymes enable the construction of electrochemical sensors for highly sensitive and selective quantitative detection of various molecules, pathogens and diseases. Herein, we describe the immobilization of a peroxidase from Bacillus s. (BsDyP) on electrochemically reduced graphene oxide (ERGO) deposited on indium tin oxide (ITO) and polyethylene terephthalate (PET) layers. XRD, SEM, AFM, FT-IR and Raman characterization of the sensor confirmed its structural integrity and a higher enzyme surface occupancy. The BsDyP-ERGO/ITO/PET electrode performed better than other horseradish peroxidase-based electrodes, as evinced by an improved electrochemical response in the nanomolar range (linearity 0.05-280 μM of H2 O2 , LOD 32 nM). The bioelectrode was mechanically robust, active in the 3.5-6 pH range and exhibited no loss of activity upon storage for 8 weeks at 4 °C.

Fabrication of Au/Fe3O4/RGO based aptasensor for measurement of miRNA-128, a biomarker for acute lymphoblastic leukemia (ALL)

Due to their high sensitivity, simplicity, portability, self-contained, and low cost, the development of electrochemical biosensors is a beneficial way to diagnose and anticipate many types of cancers. An electrochemical nanocomposite-based aptasensor is fabricated for the determination of miRNA-128 concentration as the acute lymphoblastic leukemia (ALL) biomarker for the first time. The aptamer chains were immobilized on the surface of the glassy carbon electrode (GCE) through gold nanoparticles/magnetite/reduced graphene oxide (AuNPs/Fe3O4/RGO). Fast Fourier transform infrared (FTIR), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and transmission electron microscopy (TEM) were used to characterize synthesized nanomaterials. Cyclic voltammetry (CV), square wave voltammetry (SWV), and electrochemical impedance spectroscopy (EIS) were used to characterize the modified GCE in both label-free and labeled methods. The results indicate that the modified working electrode has high selectivity and for miRNA-128 over other biomolecules. The hexacyanoferrate redox system typically operated at around 0.3 V (vs. Ag/AgCl), and the methylene blue redox system ran at about 0 V, were used as an electrochemical probe. The detection limit and linear detection range for hexacyanoferrate and methylene blue are 0.05346 fM, 0.1-0.9 fM, and 0.005483 fM, 0.01-0.09 fM, respectively. The stability and diffusion control analyses were performed as well. In both label-free and labeled methods, the modified electron showed high selectivity for miRNA-128. The use of methylene blue as a safer redox mediator caused miRNA-128 to be detected with greater accuracy at low potentials in PBS media. The findings also show the substantial improvement in detection limit and linearity by using reduced graphene oxide-magnetite-gold nanoparticles that can be verified by comparing with previous studies on the detection of other miRNAs.

Detection of Few Hydrogen Peroxide Molecules Using Self-Reporting Fluorescent Nanodiamond Quantum Sensors

Hydrogen peroxide (H₂O₂) plays an important role in various signal transduction pathways and regulates important cellular processes. However, monitoring and quantitatively assessing the distribution of H₂O₂ molecules inside living cells requires a nanoscale sensor with molecular-level sensitivity. Herein, we show the first demonstration of sub-10 nm-sized fluorescent nanodiamonds (NDs) as catalysts for the decomposition of H₂O₂ and the production of radical intermediates at the nanoscale. Furthermore, the nitrogen-vacancy quantum sensors inside the NDs are employed to quantify the aforementioned radicals. We believe that our method of combining the peroxidase-mimicking activities of the NDs with their intrinsic quantum sensor showcases their application as self-reporting H₂O₂ sensors with molecular-level sensitivity and nanoscale spatial resolution. Given the robustness and the specificity of the sensor, our results promise a new platform for elucidating the role of H₂O₂ at the cellular level.

Recent Advances in Electrochemical Sensing of Hydrogen Peroxide (H2O2) Released from Cancer Cells

Cancer is by far the most common cause of death worldwide. There are more than 200 types of cancer known hitherto depending upon the origin and type. Early diagnosis of cancer provides better disease prognosis and the best chance for a cure. This fact prompts world-leading scientists and clinicians to develop techniques for the early detection of cancer. Thus, less morbidity and lower mortality rates are envisioned. The latest advancements in the diagnosis of cancer utilizing nanotechnology have manifested encouraging results. Cancerous cells are well known for their substantial amounts of hydrogen peroxide (H₂O₂). The common methods for the detection of H₂O₂ include colorimetry, titration, chromatography, spectrophotometry, fluorimetry, and chemiluminescence. These methods commonly lack selectivity, sensitivity, and reproducibility and have prolonged analytical time. New biosensors are reported to circumvent these obstacles. The production of detectable amounts of H₂O₂ by cancerous cells has promoted the use of bio- and electrochemical sensors because of their high sensitivity, selectivity, robustness, and miniaturized point-of-care cancer diagnostics. Thus, this review will emphasize the principles, analytical parameters, advantages, and disadvantages of the latest electrochemical biosensors in the detection of H₂O₂. It will provide a summary of the latest technological advancements of biosensors based on potentiometric, impedimetric, amperometric, and voltammetric H₂O₂ detection. Moreover, it will critically describe the classification of biosensors based on the material, nature, conjugation, and carbon-nanocomposite electrodes for rapid and effective detection of H₂O₂, which can be useful in the early detection of cancerous cells.

Prussian Blue/Carbon Nanotube Sensor Spread with Gelatin/Zein Glaze: A User-Friendly Modification for Stable Interference-Free H2O2 Amperometry

We report the production and characterization of effective amperometric sensors for cathodic hydrogen peroxide (H₂O₂) detection. The proposed electrodes involve a combination of a H₂O₂-signaling Prussian Blue (PB)/carbon nanotube (CNT) layer with a glaze of the biopolymers gelatin (top) and zein (beneath) for protection against PB leakage. The sandwich-type sensor was constructed through simple "drop and dry" steps with (1) suspensions of the CNTs in a soluble PB solution, (2) zein in ethanol, and (3) gelatin in water, applied sequentially to the carbon working electrode disk of a screen-printed carbon electrode (SPCE) platform. The PB in the signaling layer acted as the electrocatalyst for H₂O₂ reduction at -150 mV vs Ag/AgCl/3 M KCl, enabling cathodic H₂O₂ amperometry with good target proportionality. Calibration trials confirmed the linearity of the response up to 700 μM (R² > 0.998), with a sensitivity of 0.425 μA μM^-1 cm^-2 and a practical detection limit of 1 μM. Quantification of H₂O₂ in model and real samples with gelatin-zein-PB/CNT-SPCEs had a recovery of close to 100% of the true value. Since they are easily and cheaply made and yield accurate target assessments, gelatin-zein-PB/CNT-SPCEs are an ideal tool for electrochemical H₂O₂ analyses in human body fluids, health care products, and samples from industries that use H₂O₂ as a bleach and germicide. Workers with little experience in sensor fabrication and limited funding will particularly benefit from utilization of the proposed H₂O₂ probes, which as well as being used in H₂O₂ testing also have a potential application as the transducer unit of oxidase-based biosensors with amperometric H₂O₂ readout.

EDTA derived graphene supported porous cobalt hexacyanoferrate nanospheres as a highly electroactive nanocomposite for hydrogen peroxide sensing

Developed a highly electroactive graphene and porous cobalt hexacyanoferrate nanosphere (Gr/P-CoHCF-NSPs) composite for H2O2 sensing by using EDTA chelation strategy.

Highly sensitive non-enzymatic hydrogen peroxide monitoring platform based on nanoporous gold via a modified solid-phase reaction method

In this work, nanoporous gold (NPG) fabricated using a modified solid-phase reaction method was developed as an electrocatalyst for the nonenzymatic detection of hydrogen peroxide (H2O2). The NPG morphology and structure were characterized by scanning electron microscopy and high-resolution transmission electron microscopy. The fabricated NPG exhibited a nanoporous framework with numerous structural defects. The NPG-based amperometric H2O2 sensor had a good selectivity, reproducibility, and low detection limit (0.3 μM) under near physiological conditions (pH = 7.4). The sensitivities of this sensor over concentration ranges of 0.002-5 mM and 5-37.5 mM were 159 and 64 μA mM-1 cm-2, respectively. These results indicate that the developed NPG is a promising material for the electrochemical sensing of H2O2.

2D/3D Copper-Based Metal-Organic Frameworks for Electrochemical Detection of Hydrogen Peroxide

Metal-organic frameworks (MOFs) have been extensively used as modified materials of electrochemical sensors in the food industry and agricultural system. In this work, two kinds of copper-based MOFs (Cu-MOFs) with a two dimensional (2D) sheet-like structure and three dimensional (3D) octahedral structure for H2O2 detection were synthesized and compared. The synthesized 2D and 3D Cu-MOFs were modified on the glassy carbon electrode to fabricate electrochemical sensors, respectively. The sensor with 3D Cu-MOF modification (HKUST-1/GCE) presented better electrocatalytic performance than the 2D Cu-MOF modified sensor in H2O2 reduction. Under optimal conditions, the prepared sensor displayed two wide linear ranges of 2 μM-3 mM and 3-25 mM and a low detection limit of 0.68 μM. In addition, the 3D Cu-MOF sensor exhibited good selectivity and stability. Furthermore, the prepared HKUST-1/GCE was used for the detection of H2O2 in milk samples with a high recovery rate, indicating great potential and applicability for the detection of substances in food samples. This work provides a convenient, practical, and low-cost route for analysis and extends the application range of MOFs in the food industry, agricultural and environmental systems, and even in the medical field.

Highly active iron-nitrogen-boron-carbon bifunctional electrocatalytic platform for hydrogen peroxide sensing and oxygen reduction

An iron-nitrogen-boron-carbon (Fe-N-B-C) bifunctional electrocatalyst was prepared by means of a facile one-step hydrothermal reduction of graphene oxide using dimethylamine borane as doping agent. In addition, hemins were efficiently anchored during doping/reducing process on this modified graphene. The as-prepared Fe-N-B-C electro-catalyst showed enhanced response as regards its potential for reduction of H₂O₂ and O₂. In view of its catalytic activity, this Fe-N-B-C material was tested for the determination of H₂O₂ with a chronoamperometry method, obtaining a detection limit as low as 0.055 μM, which is better than that of some Hemin-N-C materials. Regarding O₂ reduction reaction, a study performed using a rotating disk electrode indicated that this material exhibits a positive onset potential (0.90V vs. RHE), high selectivity (4e^- process), high limiting-current density (4.75 mA cm^-2) and strong resistance against the crossover-effect from methanol in alkaline medium, making it to be the promising candidate as alternative for commercial Pt/C catalysts. These results could have commercial and environmental relevance and would deserve further complementary investigation.

Cu-MOF/hemin: a bionic enzyme with excellent dispersity for the determination of hydrogen peroxide released from living cells

The stability, repeatability and sensitivity of an electrochemical biosensor material are closely connected with the dispersibility of metal organic frameworks (MOFs) in aqueous media. Herein, a nanocomposite based on Cu-MOF/hemin, which is not only highly water-soluble but also simple and efficient in synthesis, was used for the construction of a non-enzymatic sensor to detect hydrogen peroxide (H₂O₂). The Cu-MOF/hemin was characterized via scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS)-mapping, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and thermal gravimetric analysis (TGA), which indicate that hemin and the Cu-MOF were successfully combined. As a H₂O₂ electrochemical biomimetic enzyme, the Cu-MOF/hemin exhibited excellent electrocatalytic performance, which was confirmed by the electrochemical experiments and chromogenic reactions, and the possible mechanism of the reactions has been deduced. The electrochemical sensor based on the biomimetic enzyme exhibited an extended linear detection range from 0.01-5.0 mM (R = 0.998), low detection limit of 4.14 μM, and high selectivity and stability under the optimized conditions. More importantly, the practical application ability of the sensor was verified by the test of H₂O₂ in human serum samples and it could be used for the real-time detection of H₂O₂ released from living cells with satisfactory results. Therefore, this novel nanocomposite has certain potential in preparing electrochemical sensing platforms for nonenzymatic biosensing and provides a new method for clinical diagnosis and real-time monitoring.

A nanostructured microfluidic device for plasmon-assisted electrochemical detection of hydrogen peroxide released from cancer cells

Non-invasive liquid biopsies offer hope for a rapid, risk-free, real-time glimpse into cancer diagnostics. Recently, hydrogen peroxide (H₂O₂) was identified as a cancer biomarker due to its continued release from cancer cells compared to normal cells. The precise monitoring and quantification of H₂O₂ are hindered by its low concentration and the limit of detection (LOD) in traditional sensing methods. Plasmon-assisted electrochemical sensors with their high sensitivity and low LOD make a suitable candidate for effective detection of H₂O₂, yet their electrical properties need to be improved. Here, we propose a new nanostructured microfluidic device for ultrasensitive, quantitative detection of H₂O₂ released from cancer cells in a portable fashion. The fluidic device features a series of self-organized gold nanocavities, enhanced with graphene nanosheets having optoelectrical properties, which facilitate the plasmon-assisted electrochemical detection of H₂O₂ released from human cells. Remarkably, the device can successfully measure the released H₂O₂ from breast cancer (MCF-7) and prostate cancer (PC3) cells in human plasma. Briefly, direct amperometric detection of H₂O₂ under simulated visible light illumination showed a superb LOD of 1 pM in a linear range of 1 pM-10 μM. We thoroughly studied the formation of self-organized plasmonic nanocavities on gold electrodes via surface and photo-electrochemical characterization techniques. In addition, the finite-difference time domain (FDTD) simulation of the electric field demonstrates the intensity of charge distribution at the nanocavity structure edges under visible light illumination. The superb LOD of the proposed electrode combining gold plasmonic nanocavities and graphene sheets paves the way for the development of non-invasive plasmon-assisted electrochemical sensors that can effectively detect low concentrations of H₂O₂ released from cancer cells.

β-Cyclodextrin functionalized 3D reduced graphene oxide composite-based electrochemical sensor for the sensitive detection of dopamine

A three-dimensional reduced graphene oxide nanomaterial with β-cyclodextrin modified glassy carbon electrode (3D-rGO/β-CD/GCE) was constructed and used to detect the electrochemical behavior of dopamine (DA). The nanocomposite materials were characterized by scanning electron microscopy (SEM), infrared spectrometry (FT-IR), Raman spectrogram and thermogravimetric analysis (TGA), which showed that β-CD was well modified on 3D graphene with a porous structure. The electrochemical properties of different modified electrodes were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), proving the highest electron transfer rate of the 3D-rGO/β-CD modified electrode. The experimental conditions such as scan rate, pH, enrichment time and layer thickness were optimized. Under the best experimental conditions, DA was detected by differential pulse voltammetry (DPV) by 3D-rGO/β-CD/GCE with excellent electrocatalytic ability and satisfactory recognition ability, resulting in a wide linear range of 0.5-100 μM and a low detection limit (LOD) of 0.013 μM. The modified electrode based on 3D-rGO/β-CD nanocomposites is promising in the field of electrochemical sensors due to its high sensitivity and other excellent properties.

Application of an electrochemical sensor using copper oxide nanoparticles/polyalizarin yellow R nanocomposite for hydrogen peroxide

In this study, copper oxide nanoparticles (CuONPs) were prepared by a simple chemical method and then characterized by scanning electron microscope (SEM). A novel electrochemical sensor for hydrogen peroxide (H₂O₂) analysis was prepared by immobilizing copper oxide nanoparticles and polyalizarin yellow R (PYAR) on bare glassy carbon electrode (PAYR/CuONPs/GCE). The electrocatalytical behavior of the proposed electrochemical sensor was also studied by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). Based on the results, the PAYR/CuONP nanocomposite had significant electrocatalytic oxidation and reduction properties for the detection and determination of H₂O₂. Some parameters such as linear range, sensitivity, and detection limit for reduction peak were obtained as 0.1-140 μM, 1.4154 μA cm^-2 μM^-1, and 0.03 μM, respectively, by the DPV technique. Some advantages of this electrode were having widespread linear range, low detection limit, and, most importantly, ability in simultaneous oxidation and reduction of H₂O₂ at two applied potentials.

SERR Spectroelectrochemistry as a Guide for Rational Design of DyP-Based Bioelectronics Devices

Immobilised dye-decolorizing peroxidases (DyPs) are promising biocatalysts for the development of biotechnological devices such as biosensors for the detection of H2O2. To this end, these enzymes have to preserve native, solution properties upon immobilisation on the electrode surface. In this work, DyPs from Cellulomonas bogoriensis (CboDyP), Streptomyces coelicolor (ScoDyP) and Thermobifida fusca (TfuDyP) are immobilised on biocompatible silver electrodes functionalized with alkanethiols. Their structural, redox and catalytic properties upon immobilisation are evaluated by surface-enhanced resonance Raman (SERR) spectroelectrochemistry and cyclic voltammetry. Among the studied electrode/DyP constructs, only CboDyP shows preserved native structure upon attachment to the electrode. However, a comparison of the redox potentials of the enzyme in solution and immobilised states reveals a large discrepancy, and the enzyme shows no electrocatalytic activity in the presence of H2O2. While some immobilised DyPs outperform existing peroxidase-based biosensors, others fail to fulfil the essential requirements that guarantee their applicability in the immobilised state. The capacity of SERR spectroelectrochemistry for fast screening of the performance of immobilised heme enzymes places it in the front-line of experimental approaches that can advance the search for promising DyP candidates.