Development of new peptide-based receptor of fluorescent probe with femtomolar affinity for Cu(+) and detection of Cu(+) in Golgi apparatus

Semi-quantitative and visual detection of Cu2+ and glyphosate in real samples and living cells using fluorescent and colorimetric dual-signals peptide-based probe

The excessive emission of copper ions (Cu2+) and the abuse of glyphosate (Glyp) have caused serious harm to the ecological environment and human health, so it is important to develop a fast and convenient method for the analysis of Cu2+ and glyphosate to ensure environmental and food safety. Herein, a dual-signals peptide-based probe (FASRH) with fluorescent and colorimetric was prepared using 5-carboxyl fluorescein modified tetrapeptide (Ala-Ser-Arg-His-NH2). FASRH was successfully used to recognize Cu2+ as a fluorescence "on-off" probe, forming the FASRH-Cu2+ complex with non-fluorescence. As a new promising cascade probe, FASRH-Cu2+ complex probe has high selectivity (only Glyp), good sensitivity (50.2 nM), good anti-interference ability and wide pH range (7.0-11.0) for the detection of glyphosate by ligand replacement method. In addition, the recognizable color changed markedly under 365 nm UV light and natural light. Notably, FASRH not only achieved accurate monitoring of Cu2+ and glyphosate in two real water samples, but also successfully applied to detect Cu2+ and glyphosate in live Hacat cells based on low cytotoxicity. Moreover, it is worth noting that FASRH-impregnated test strips exhibited significant fluorescence and colorimetric color changes for Cu2+ and glyphosate via naked eye. Furthermore, smartphone-assisted FASRH was used for the portable detection of Cu2+ and glyphosate based on the advantages of simplicity, low cost and fast response.

Ratiometric peptide-based fluorescent probe with large Stokes shift for detection of Hg2+ and S2- and its applications in cells imaging and smartphone-assisted recognition

In this work, a new ratiometric fluorescent probe DKA was synthesized based on the double sides of lysine backbone conjugated with alanine and dansyl groups. DKA exhibited fluorescence ratiometric response for Hg2+ with high sensitivity (13.4 nM), specific selectivity (only Hg2+), strong anti-interference ability (no interference), fast recognition (within 60 s) and wide pH range (5-10). The stoichiometry of binding of DKA and Hg2+ was determined to be 1:1 via Job's plot, ESI-HRMS and 1HNMR titration analysis. Subsequently, the in situ formation of DKA-Hg2+ complex was used for highly selective detection of S2- as a novel fluorescence "on-off" probe, and the lowest detection limit for S2- was 12.9 nM. In addition, DKA possessed excellent cells permeation and low toxicity, and fluorescence imaging of Hg2+ and S2- was performed in living Hacat cells. Most importantly, the digital imaging using a smartphone color recognition APP indicated that DKA could semi-quantitatively and visually detected Hg2+ and S2- without expensive equipment.

Fluorescent probes for targeting the Golgi apparatus: design strategies and applications

The Golgi apparatus is an essential organelle constructed by the stacking of flattened vesicles, that is widely distributed in eukaryotic cells and is dynamically regulated during cell cycles. It is a central station which is responsible for collecting, processing, sorting, transporting, and secreting some important proteins/enzymes from the endoplasmic reticulum to intra- and extra-cellular destinations. Golgi-specific fluorescent probes provide powerful non-invasive tools for the real-time and in situ visualization of the temporal and spatial fluctuations of bioactive species. Over recent years, more and more Golgi-targeting probes have been developed, which are essential for the evaluation of diseases including cancer. However, when compared with systems that target other important organelles (e.g. lysosomes and mitochondria), Golgi-targeting strategies are still in their infancy, therefore it is important to develop more Golgi-targeting probes. This review systematically summarizes the currently reported Golgi-specific fluorescent probes, and highlights the design strategies, mechanisms, and biological uses of these probes, we have structured the review based on the different targeting groups. In addition, we highlight the future challenges and opportunities in the development of Golgi-specific imaging agents and therapeutic systems.

A dual-signals fluorometric and colorimetric peptide-based probe for Cu(II) and glyphosate detection and its application for bioimaging and water testing

A novel dual-signal fluorometric and colorimetric probe FMDH (5-FAM-Met-Asp-His-NH2), incorporating a tripeptide (Met-Asp-His-NH2) linked to 5-carboxyfluorescein (5-FAM), was firstly synthesised. FMDH demonstrated exceptional selectivity and sensitivity, rapid response, wide pH response range and robust anti-interference capabilities for monitoring Cu2+. This was achieved through a distinctive naked-eye colorimetric and fluorescent quenching behaviour. A good linearity within the range of 0-3 μM (R2 = 0.9914) was attained, and the limit of detection (LOD) for Cu2+ was 47.4 nM. Furthermore, the FMDH-Cu2+ ensemble responded to glyphosate with notable selectivity and sensitivity. A good linear correlation (R2 = 0.9926) was observed at the lower concentration range (2.4-7.8 μM) and achieving a detection limit as low as 29.9 nM. The response time of FMDH with Cu2+ and glyphosate were less than 20 s, and the pH range of 7-11 that was suitable for practical application under physiological pH conditions. MTT assays confirmed that FMDH offers good permeability and low toxicity, facilitating successful application in imaging analysis of Cu2+ and glyphosate in living cells and zebrafish. In addition, FMDH was employed in the detection of these analytes in real water samples. Cost-effective, highly sensitive and easily prepared FMDH-impregnated test strips were developed for the efficient visual detection of Cu2+ and glyphosate under 365 nm UV light. Increasing concentrations of Cu2+ and glyphosate resulted in notable colour changes under 365 nm UV light, enabling visual semi-quantitative analysis via a smartphone colour-analysis App.

Small-Molecule Fluorescent Probes for Binding- and Activity-Based Sensing of Redox-Active Biological Metals

Although transition metals constitute less than 0.1% of the total mass within a human body, they have a substantial impact on fundamental biological processes across all kingdoms of life. Indeed, these nutrients play crucial roles in the physiological functions of enzymes, with the redox properties of many of these metals being essential to their activity. At the same time, imbalances in transition metal pools can be detrimental to health. Modern analytical techniques are helping to illuminate the workings of metal homeostasis at a molecular and atomic level, their spatial localization in real time, and the implications of metal dysregulation in disease pathogenesis. Fluorescence microscopy has proven to be one of the most promising non-invasive methods for studying metal pools in biological samples. The accuracy and sensitivity of bioimaging experiments are predominantly determined by the fluorescent metal-responsive sensor, highlighting the importance of rational probe design for such measurements. This review covers activity- and binding-based fluorescent metal sensors that have been applied to cellular studies. We focus on the essential redox-active metals: iron, copper, manganese, cobalt, chromium, and nickel. We aim to encourage further targeted efforts in developing innovative approaches to understanding the biological chemistry of redox-active metals.

Recent Advancements and Future Prospects in NBD-Based Fluorescent Chemosensors: Design Strategy, Sensing Mechanism, and Biological Applications

In recent years, the field of Supramolecular Chemistry has witnessed tremendous progress owing to the development of versatile optical sensors for the detection of harmful biological analytes. Nitrobenzoxadiazole (NBD) is one such scaffold that has been exploited as fluorescent probes for selective recognition of harmful analytes and their optical imaging in various cell lines including HeLa, PC3, A549, SMMC-7721, MDA-MB-231, HepG2, MFC-7, etc. The NBD-derived molecular probes are majorly synthesized from the chloro derivative of NBD via nucleophilic aromatic substitution. This general NBD moiety ligation method to nucleophiles has been leveraged to develop various derivatives for sensing analytes. NBD-derived probes are extensively used as optical sensors because of remarkable properties like excellent stability, large Stoke's shift, high efficiency and stability, visible excitation, easy use, low cost, and high quantum yield. This article reviewed NBD-based probes for the years 2017-2023 according to the sensing of analyte(s), including cations, anions, thiols, and small molecules like hydrogen sulfide. The sensing mechanism, designing of the probe, plausible binding mechanism, and biological application of chemosensors are summarized. The real-time application of optical sensors has been discussed by various methods, such as paper strips, molecular logic gates, smartphone detection, development of test kits, etc. This article will update the researchers with the in vivo and in vitro biological applicability of NBD-based molecular probes and challenges the research fraternity to design, propose, and develop better chemosensors in the future possessing commercial utility.

Small Molecule Optical Probes for Detection of H2S in Water Samples: A Review

Hydrogen sulfide (H2S) is closely linked to not only environmental hazards, but also it affects human health due to its toxic nature and the exposure risks associated with several occupational settings. Therefore, detection of this pollutant in water sources has garnered immense importance in the analytical research arena. Several research groups have devoted great efforts to explore the selective as well as sensitive methods to detect H2S concentrations in water. Recent studies describe different strategies for sensing this ubiquitous gas in real-life water samples. Though many of the designed and developed H2S detection approaches based on the use of organic small molecules facilitate qualitative/quantitative detection of the toxic contaminant in water, optical detection has been acknowledged as one of the best, attributed to the simple, highly sensitive, selective, and good repeatability features of the technique. Therefore, this review is an attempt to offer a general perspective of easy-to-use and fast response optical detection techniques for H2S, fluorimetry and colorimetry, over a wide variety of other instrumental platforms. The review affords a concise summary of the various design strategies adopted by various researchers in constructing small organic molecules as H2S sensors and offers insight into their mechanistic pathways. Moreover, it collates the salient aspects of optical detection techniques and highlights the future scope for prospective exploration in this field based on the limitations of the existing H2S probes.

A novel Cu(II)-assisted peptide fluorescent probe for highly sensitive detection of glyphosate in real samples: real application in test strips and smartphone

Glyphosate (Glyp) is an organophosphorus herbicide, and its abuse causes potential harm to the environment and human health. Thus, the development of simple and portable methods for rapid and visual detection of glyphosate is of great importance. Herein, we successfully developed a new fluorescent probe L with dansyl fluorophore as a fluorescent dye and tetrapeptide (Ala-Ser-Arg-His-NH2) as a recognition group. According to the design, L exhibited a specific fluorescence quenching response to Cu2+ and formed an L-Cu2+ ensemble with a molecular ratio of 2:1, demonstrating a limit of detection (LOD) as low as 12.04 nM. Interestingly, the L-Cu2+ ensemble as a relay response probe exhibited a specific fluorescence "off-on" response to glyphosate without interference from other pesticides and anions based on the strong complexation of glyphosate and Cu2+. The LOD of the L-Cu2+ ensemble for glyphosate was calculated as 12.59 nM. Additionally, the results of three recovery experiments with real samples showed that L has good practicability and accuracy in detecting glyphosate. Test strips were also fabricated to achieve facile detection of glyphosate to demonstrate the practical application potential of the L-Cu2+ ensemble. The L-Cu2+ ensemble was integrated with a smartphone for semi-quantification of glyphosate in a field environment under a 365 nm UV lamp.

Current and Future of "Turn-On" Based Small-Molecule Copper Probes for Cuproptosis

Increasing evidence shows that abnormal copper (Cu) metabolism is highly related to many diseases, such as Alzheimer's disease, Wilson's disease, hematological malignancies and Menkes disease. Very recently, cuproptosis, a Cu-dependent, programmed cell death was firstly described by Tsvetkov et al. in 2022. Their findings may provide a new perspective for the treatment of related diseases. However, the concrete mechanisms of these diseases, especially cuproptosis, remain completely unclear, the reason of which may be a lack of reliable tools to conduct highly selective, sensitive and high-resolution imaging of Cu in complex life systems. So far, numerous small-molecular fluorescent probes have been designed and utilized to explore the Cu signal pathway. Among them, fluorescence turn-on probes greatly enhance the resolution and accuracy of imaging and may be a promising tool for research of investigation into cuproptosis. This review summarizes the probes developed in the past decade which have the potential to study cuproptosis, focusing on the design strategies, luminescence mechanism and biological-imaging applications. Besides, we put forward some ideas concerning the design of next-generation probes for cuproptosis, aiming to tackle the main problems in this new field. Furthermore, the prospect of cuproptosis in the treatment of corresponding diseases is also highlighted.

A novel fluorescent probe based on a tripeptide-Cu(II) complex system for detection of histidine and its application on test strips and smartphone

Herein, we reported a novel peptide-based fluorescent probe DSSH for highly selective and sensitive detections of both Cu²⁺ and _l-histidine (_l-His). DSSH exhibited different color changes and fluorescence "on-off" response toward Cu²⁺ with a 2:1 binding stoichiometry, and the limit of detection (LOD) for Cu²⁺ was calculated to be 22.9 nM. The in situ formed DSSH-Cu²⁺ ensemble showed obvious fluorescence "off-on" response to _l-His based on replacement reaction with Cu²⁺, as well as the discernable color changes under 365 nm UV lamp irradiation with "naked eye". The specificity of Cu²⁺/_l-His interactions allowed _l-His to be determined without interference from other amino acids, and the detection limit of DSSH-Cu²⁺ ensemble response to _l-His was determined as 25.7 nM. Notably, DSSH was successfully applied for detecting Cu²⁺ and _l-His in RKO living cells owing to its remarkable fluorescence behavior and low cytotoxicity. Test strips experiments suggested that DSSH can recognize Cu²⁺ and _l-His together by a remarkable fluorescence change. More importantly, smartphone was combined with _l-His solutions of different concentrations and converted into digital values through RGB channels, which was successfully used for semi-quantitative identification of _l-His, and the limit of detection (LOD) was 0.97 μM.

Development of a Fluorescein-Based Probe with an "Off-On" Mechanism for Selective Detection of Copper (II) Ions and Its Application in Imaging of Living Cells

Copper is a common metallic element that plays an extremely essential role in the physiological activities of living organisms. The slightest change in copper levels in the human body can trigger various diseases. Therefore, it is important to accurately and efficiently monitor copper ion levels in the human body. Recent studies have shown that fluorescent probes have obvious advantages in bioimaging and Cu²⁺ detection. Therefore, a novel Cu²⁺ probe (N2) was designed and synthesized from fluorescein, hydrazine hydrate and 5-p-nitrophenylfurfural that is sensitive to and can detect Cu²⁺ within 100 s. The response mechanism of the N2 probe to Cu²⁺ was studied by several methods such as Job's plots and MS analysis, which showed that the Cu²⁺ and the N2 probe were coordinated in a complexation ratio of 1:1. In addition, compared with other cations investigated in this study, the N2 probe showed excellent selectivity and sensitivity to Cu²⁺, exhibiting distinct fluorescence absorption at 525 nm. Furthermore, in the equivalent range of 0.1-1.5, there is a good linear relationship between Cu²⁺ concentration and fluorescence intensity, and the detection limit is 0.10 μM. It is worth mentioning that the reversible reaction between the N2 probe and Cu²⁺, as well as the good biocompatibility shown by the probe in bioimaging, make it a promising candidate for Cu²⁺ biosensor applications.

Rational Design of Organelle-Targeted Fluorescent Probes: Insights from Artificial Intelligence

Monitoring the physiological changes of organelles is essential for understanding the local biological information of cells and for improving the diagnosis and therapy of diseases. Currently, fluorescent probes are considered as the most powerful tools for imaging and have been widely applied in biomedical fields. However, the expected targeting effects of these probes are often inconsistent with the real experiments. The design of fluorescent probes mainly depends on the empirical knowledge of researchers, which was inhibited by limited chemical space and low efficiency. Herein, we proposed a novel multilevel framework for the prediction of organelle-targeted fluorescent probes by employing advanced artificial intelligence algorithms. In this way, not only the targeting mechanism could be interpreted beyond intuitions but also a quick evaluation method could be established for the rational design. Furthermore, the targeting and imaging powers of the optimized and synthesized probes based on this methodology were verified by quantitative calculation and experiments.

Progress in the Development of Biosensors Based on Peptide-Copper Coordination Interaction

Copper ions, as the active centers of natural enzymes, play an important role in many physiological processes. Copper ion-based catalysts which mimic the activity of enzymes have been widely used in the field of industrial catalysis and sensing devices. As an important class of small biological molecules, peptides have the advantages of easy synthesis, excellent biocompatibility, low toxicity, and good water solubility. The peptide-copper complexes exhibit the characteristics of low molecular weight, high tenability, and unique catalytic and photophysical properties. Biosensors with peptide-copper complexes as the signal probes have promising application prospects in environmental monitoring and biomedical analysis and diagnosis. In this review, we discussed the design and application of fluorescent, colorimetric and electrochemical biosensors based on the peptide-copper coordination interaction.

Peptide-based colorimetric and fluorescent dual-functional probe for sequential detection of copper(Ⅱ) and cyanide ions and its application in real water samples, test strips and living cells

A novel dual-functional peptide probe FLH based on fluorescent "on-off-on" strategy and colorimetric visualization method was designed and synthesized. This new probe exhibited highly selective and rapid detection of Cu²⁺ with significant fluorescent "turn-off" response, with a visible colorimetric change from yellow to orange. The combination ratio of FLH to Cu²⁺ (1:1) was determined using ESI-HRMS spectra and Job's plot. The fluorescent emission showed a good linear response (R² = 0.9986) with a low detection limit of 1.5 nM. In addition, the FLH-Cu²⁺ complex displayed colorimetric changes and a fluorescent "off-on" response toward CN^- over a wide pH range from 7 to 12. This detection behavior was observed within 20 s, with a limit of detection (LOD) for CN^- at 12.7 nM. Based on stability and accuracy, FLH was next developed as dual-functional test strips, and was also successfully applied to detect Cu²⁺ and CN^- in two actual water samples. More importantly, the cytotoxicity studies indicated that FLH had good biocompatibility and low toxicity, and was successfully utilized for monitoring Cu²⁺ and CN^- in living cells through fluorescence imaging.

A novel peptide-based fluorescent probe with a large stokes shift for rapid and sequential detection of Cu2+ and CN- in aqueous systems and live cells

A novel fluorescent probe (DSD) was reasonably designed and synthesized with dansyl-labeled dipeptide (Dan-Ser-Asp-NH₂). DSD featured remarkably large Stokes shift (230 nm) and perfect water solubility, and exhibited high selectivity and rapid recognition toward Cu²⁺via fluorescence quenching. The detection limit of DSD for Cu²⁺ was 2.4 nM, indicated that DSD has excellent sensitivity. In addition, the stoichiometry between DSD and Cu²⁺ were detected as 1:1 by fluorescence titration, Job's plot and ESI-HRMS data. As designed, DSD-Cu²⁺ system was able to sequentially detect CN^- according to the displacement approach with fluorescence "off-on" response, and the detection limit for CN^- was calculated to be 41.9 nM. Specifically, the response time of DSD with Cu²⁺ and CN^- was less than 40 s, which rendered it suitable for real time detection in actual water samples. In addition, with the alternate addition of Cu²⁺ and CN^-, the reversible cycles could be repeated for at least 10 times, indicated that DSD was a promising reversibility probe. DSD showed low toxicity and good biocompatibility, and was successfully applied to detect Cu²⁺ and CN^- in living cells.

A dual-functional colorimetric and fluorescent peptide-based probe for sequential detection of Cu2+ and S2- in 100% aqueous buffered solutions and living cells

Highly sensitive and selectivite detection of copper ions (Cu²⁺) and hydrogen sulfide (H₂S) have become important research topics due to the potential harmful impacts of these chemicals to human health and the environment. In this study, we report the synthesis of a dual-functional peptide-based probe L (FITC-AhxSerSerHis), designed to mimic a copper-sulfur metalloprotein, and capable of continuous detection of Cu²⁺ and S^2- based on colorimetric and fluorescent methods. The new probe L displayed excellent "turn off" fluorescence response and good selectivity for Cu²⁺ ions via a modification of the tripeptide and fluorescein isothiocyanate group, and produced an obvious color change visible to the naked eye. Furthermore, as an excitable probe, the L-Cu complex could continuously detect S^2- with high selectivity and sensitivity in 100% aqueous buffered solutions. The detection limits for fluorescence titration measurements, calculated using the equation 3σ/k, were 76.7 nM (Cu²⁺) and 27.2 nM (S^2-), which were well below U.S. EPA safety levels. In addition, L could be cycled to alternately detect Cu²⁺ and S^2-, thereby making it a promising reversible probe. Moreover, L was successfully applied to monitoring Cu²⁺ and S^2- in live RKO cells through fluorescence imaging, exhibiting low cytotoxicity and good cell permeability.

An unprecedented polyhydroxycarboxylic acid ligand bridged multi-EuIII incorporated tellurotungstate and its luminescence properties

The first polyhydroxycarboxylic acid ligand bridged multi-EuIII-incorporated tellurotungstate K14H10[Eu4(H2O)4W6(H2glu)4O12(B-α-TeW9O33)4]·60H2O (H6glu = d-gluconic acid) (1) was synthesized via an organic ligand-driven self-assembly strategy. The polyhydroxycarboxylic acid ligand bridged tetrameric polyoxoanion [Eu4(H2O)4W6(H2glu)4O12(B-α-TeW9O33)4]24- in 1 can be viewed as an aggregation of four trivacant Keggin [B-α-TeW9O33]8- fragments and an innovative heterometallic [Eu4(H2O)4W6(H2glu)4O12]8+ cluster, in which four high-coordinate polyhydroxy flexible H2glu4- ligands chelate W and Eu centers through carboxyl and hydroxyl groups, giving rise to a heterometallic cluster. The hexagonal packing of the tetrameric polyoxoanions in 1 along the c axis provides excellent porous channels, which greatly increases the specific surface area of the whole framework and may be of benefit for fluorescence sensing in aqueous solution. 1 can function as a "turn-off" luminescence sensor to detect Cu2+ ions in aqueous solution. The limit of detection (LOD) of the 1-sensor is 8.82 × 10-6 mM, which is the lowest among the reported polyoxometalate-based fluorescence sensors. As for the Cu2+-quenching system, it can function as an "off-on" sensor to detect cysteine in an aqueous system, affording a LOD of 1.75 × 10-4 mM. This work opens up an avenue to broaden the applications of polyoxometalate-based materials in the optical intelligence detection field.

A water-soluble peptide fluorescent chemosensor for detection of cadmium (II) and copper (II) by two different response modes and its application in living LNcap cells

A novel peptide-based fluorescent chemosensor (DGC) based on dansyl-appended dipeptide (Gly-Cys-NH₂) was synthesized using SPPS technology. DGC exhibited highly sensitive detection of Cadmium (II) ions in 100% aqueous solutions through fluorescent "turn on" response and the detection limits of 14.5 nM. On the other hand, the fluorescence of DGC was almost completely quenched with fast response time when the addition of Cu²⁺ ions to DGC solutions, the detection limits for Cu²⁺ was 26.3 nM. In addition, the 2:1 binding stoichiometry of DGC with Cd²⁺ and Cu²⁺ were confirmed by Job's plot, fluorescent titration and HR-MS data. More importantly, MTT assays and fluorescence imaging experiments suggested that DGC has outstanding membrane permeability and hypotoxicity, and could be an efficient fluorescent chemosensor for Cd²⁺ and Cu²⁺ detection by two different response modes in living LNcap cells.

A sequential and reversibility fluorescent pentapeptide probe for Cu(II) ions and hydrogen sulfide detections and its application in two different living cells imaging

In this study, we report a sequential and reversibility fluorescent probe (DP5) based on pentapeptide conjugated with dansyl groups using the solid phase peptide synthesis (SPPS) technology. DP5 showed immediate "turn off" response toward Cu²⁺ ions at an excitation wavelength of 330 nm with detection limits of 23.5 nM. The 2:1 binding ratio between DP5 and Cu²⁺ were confirmed using Job's plot method and fluorescence titration study, and DP5-Cu complex was observed with an association constant of 6.76 × 10⁸ M^-2. As designed, DP5-Cu complex as a promising analytical probe exhibited highly selective for H₂S detection in aqueous solutions. The detection limit for H₂S was obtained to be 17.2 nM, and lower than EPA and WHO guidelines. In addition, the reversibility and cyclicity were imparted to the DP5 during the detection of Cu²⁺ and H₂S, and cycle effect is very good. Furthermore, DP5 displayed better biocompatibility and low biotoxicity, and sequential fluorescence "on-off-on" responses of DP5 to Cu²⁺ and H₂S were successfully applied in two different living cells.

Porphyrinic Probe for Fluorescence "Turn-On" Monitoring of Cu+ in Aqueous Buffer and Mitochondria

A zinc(II) porphyrin derivative (ZPSN) was designed and synthesized, and this probe exhibited rapid, selective and reversible binding to Cu⁺ for fluorescence monitoring in pure aqueous buffer. The detection mechanism is based on Cu⁺-activated disruption of axial coordination between the pyridyl ligand and the zinc center, which changes the molecular geometry and inhibits intramolecular electron transfer (ET), leading to fluorescence enhancement of the probe. The proposed sensing mechanism was supported by UV-vis spectroscopy/fluorescence spectral titration, NMR spectroscopy, mass spectrometry, and time-resolved fluorescence decay studies. The dissociation constant was calculated to be 6.53 × 10^-11 M. CLSM analysis strongly suggested that ZPSN could penetrate live cells and successfully visualize Cu⁺ in mitochondria. This strategy may establish a design and offer a potential building block for construction of other metal sensors based on a similar mechanism.

Highly sensitive and selective light-up fluorescent probe for monitoring gallium and chromium ions in vitro and in vivo

Here reported an NBDT sensor could be effectively responsive to gallium and chromium for bio-imaging in vivo.

A dansyl-based fluorescent probe for the highly selective detection of cysteine based on a d-PeT switching mechanism

A novel fluorescent probe DN-C for detection of cysteine (Cys) based on d-PeT switching mechanism was reported.