Carbon nanotube modification of microbial fuel cell electrodes

Enhancing electrokinetics and desalination efficiency through catalysts and electrode modifications in microbial desalination cells

Microbial desalination cells (MDCs) are considered as a sustainable technology for water desalination, wastewater treatment, and power generation. However, this neoteric technology suffers from different challenges, including sluggish oxygen reduction reaction and poor electron transfer from microbes to electrodes, ultimately leading to less power generation and desalination efficiency. This review delves into the intricate roles of both abiotic and biocatalysts in enhancing performance of MDCs through ion removal and charge transfer mechanisms. Detailed discussions highlight the comparative advantages and limitations of different catalyst types and insights into electrode modifications to optimise catalytic activity and biofilm formation. Further, recent advancements in electrode engineering, including surface coatings and integration of nanomaterial, geared towards enhancing efficiency of MDC and performance stability are discussed. Finally, future recommendations are provided, focusing on innovative catalyst designs, material integration, and considerations for scale-up and commercialisation, thereby offering a comprehensive roadmap for the continued advancement of MDC.

Implementation of cytochrome c proteins and carbon nanotubes hybrids in bioelectrodes towards bioelectrochemical systems applications

Multiheme cytochrome c (Cyt c) can function as a redox protein on electrode to accomplish bioelectrocatalysis. However, the direct electron transfer (DET) between the redox site of Cyt c and electrode is low due to the large coupling distance. A close proximity or a connection pathway from the deeply buried active site to the protein surface can be established by modifying the electrode with carbon nanotubes (CNTs) to improve the DET. Therefore, the isolated Cyt c has been assembled or casted with CNTs by various processes to form Cyt c-CNTs bioelectrodes that can be further applied to biosensing and bioanalysis. These strategies can be transplanted to the fabrication of biofilm-CNTs based electrodes by complexing the out membrane (OM) Cyt c of natural electricigen with CNTs to realize the application of the electrochemical properties of "in vivo" Cyt c to bioelectrochemical systems (BESs). This review intends to highlight the preparation strategies of bioelectrodes that have been well studied in electrochemical biosensors and improving approaches of the DET from the CNTs surface to Cyt c in their hybrids. The efficient fabrication processes of the biofilm-CNTs based electrodes that can be considered as "in vivo" Cyt c-CNTs based electrodes for BES designs are also summarized, aiming to provide an inspiration source and a reference to the related studies of BES downstream.

N-Doped Carbon Nanowire-Modified Macroporous Carbon Foam Microbial Fuel Cell Anode: Enrichment of Exoelectrogens and Enhancement of Extracellular Electron Transfer

Microbial fuel cell (MFC) performance is affected by the metabolic activity of bacteria and the extracellular electron transfer (EET) process. The deficiency of nanostructures on macroporous anode obstructs the enrichment of exoelectrogens and the EET. Herein, a N-doped carbon nanowire-modified macroporous carbon foam was prepared and served as an anode in MFCs. The anode has a hierarchical porous structure, which can solve the problem of biofilm blockage, ensure mass transport, favor exoelectrogen enrichment, and enhance the metabolic activity of bacteria. The microscopic morphology, spectroscopy, and electrochemical characterization of the anode confirm that carbon nanowires can penetrate biofilm, decrease charge resistance, and enhance long-distance electron transfer efficiency. In addition, pyrrolic N can effectively reduce the binding energy and electron transfer distance of bacterial outer membrane hemin. With this hierarchical anode, a maximum power density of 5.32 W/m3 was obtained, about 2.5-fold that of bare carbon cloth. The one-dimensional nanomaterial-modified macroporous anodes in this study are a promising strategy to improve the exoelectrogen enrichment and EET for MFCs.

Living electrochemical biosensing: Engineered electroactive bacteria for biosensor development and the emerging trends

Bioelectrical interfaces made of living electroactive bacteria (EAB) provide a unique opportunity to bridge biotic and abiotic systems, enabling the reprogramming of electrochemical biosensing. To develop these biosensors, principles from synthetic biology and electrode materials are being combined to engineer EAB as dynamic and responsive transducers with emerging, programmable functionalities. This review discusses the bioengineering of EAB to design active sensing parts and electrically connective interfaces on electrodes, which can be applied to construct smart electrochemical biosensors. In detail, by revisiting the electron transfer mechanism of electroactive microorganisms, engineering strategies of EAB cells for biotargets recognition, sensing circuit construction, and electrical signal routing, engineered EAB have demonstrated impressive capabilities in designing active sensing elements and developing electrically conductive interfaces on electrodes. Thus, integration of engineered EAB into electrochemical biosensors presents a promising avenue for advancing bioelectronics research. These hybridized systems equipped with engineered EAB can promote the field of electrochemical biosensing, with applications in environmental monitoring, health monitoring, green manufacturing, and other analytical fields. Finally, this review considers the prospects and challenges of the development of EAB-based electrochemical biosensors, identifying potential future applications.

Microfluidic membraneless microbial fuel cells: new protocols for record power densities

The main hurdle in leveraging microfluidic advantages in membraneless MFCs is their low electrode area-normalized power. For nearly a decade, maximum power densities have remained stagnant, while at the same time macrosystems continue to gather pace. To bridge this growing gap, we showcase a strategy that focuses on (i) technology improvements, (ii) establishment of record areal power densities, and (iii) presentation of different normalization methods that complement areal power densities and enable direct comparisons across all MFC scales. Using a pure-culture Geobacter sulfurreducens electroactive biofilm (EAB) in a new membraneless MFC that adheres to the strategy above, we observed optimal anode colonization, resulting in the highest recorded electrode areal power density for a microfluidic MFC of 3.88 W m-2 (24.37 kW m-3). We also consider new power normalization methods that may be more appropriate for comparison to other works. Normalized by the wetted cross-section area between electrodes accounts for constraints in electrode/electrolyte contact, resulting in power densities as high as 8.08 W m-2. Alternatively, we present a method to normalize by the flow rate to account for acetate supply, obtaining normalized energy recovery values of 0.025 kW h m-3. With these results, the performance gap between micro- and macroscale MFCs is closed, and a road map to move forward is presented.

Nitrobenzene reduction promoted by the integration of carbon nanotubes and Geobacter sulfurreducens

Electron shuttles (ES) can mediate long-distance electron transfer between extracellular respiratory bacteria (ERB) and the surroundings. However, the effects of graphite structure in ES on the extracellular electron transfer (EET) process remain ambiguous. This work investigated the function of graphite structure in the process of nitrobenzene (NB) degradation by Geobacter sulfurreducens PCA, in which highly aromatic carbon nanotubes (CNTs) was studied as a typical ES. The results showed that the addition of 1.5 g L^-1 of CNTs improved the NB biodegradation up to 81.2%, plus 18.8% NB loss due to the adsorption property of CNTs, achieving complete removal of 200 μM NB within 9 h. The amendment of CNTs greatly increased the EET rate, indicating that graphite structure exhibited excellent electron shuttle performance. Furthermore, Raman spectrum proved that CNTs obtained better graphite structure after 90 h of cultivation with strain PCA, resulting in higher electrochemical performance. Also, CNTs was perceived as the "Contaminant Reservoir", which alleviated the toxic effect of NB and shortened the distance of EET process. Overall, this work focused on the effects of material graphite structure on the EET process, which enriched the understanding of the interaction between CNTs and ERB, and these results might promote their application in the in-situ bioremediation of nitroaromatic-polluted environment.

Microbial Fuel Cell Construction Features and Application for Sustainable Wastewater Treatment

A microbial fuel cell (MFC) is a system that can generate electricity by harnessing microorganisms' metabolic activity. MFCs can be used in wastewater treatment plants since they can convert the organic matter in wastewater into electricity while also removing pollutants. The microorganisms in the anode electrode oxidize the organic matter, breaking down pollutants and generating electrons that flow through an electrical circuit to the cathode compartment. This process also generates clean water as a byproduct, which can be reused or released back into the environment. MFCs offer a more energy-efficient alternative to traditional wastewater treatment plants, as they can generate electricity from the organic matter in wastewater, offsetting the energy needs of the treatment plants. The energy requirements of conventional wastewater treatment plants can add to the overall cost of the treatment process and contribute to greenhouse gas emissions. MFCs in wastewater treatment plants can increase sustainability in wastewater treatment processes by increasing energy efficiency and reducing operational cost and greenhouse gas emissions. However, the build-up to the commercial-scale still needs a lot of study, as MFC research is still in its early stages. This study thoroughly describes the principles underlying MFCs, including their fundamental structure and types, construction materials and membrane, working mechanism, and significant process elements influencing their effectiveness in the workplace. The application of this technology in sustainable wastewater treatment, as well as the challenges involved in its widespread adoption, are discussed in this study.

The material-microorganism interface in microbial hybrid electrocatalysis systems

This review presents a comprehensive summary of the material-microorganism interface in microbial hybrid electrocatalysis systems. Microbial hybrid electrocatalysis has been developed to combine the advantages of inorganic electrocatalysis and microbial catalysis. However, electron transfer at the interfaces between microorganisms and materials is a very critical issue that affects the efficiency of the system. Therefore, this review focuses on the electron transfer at the material-microorganism interface and the strategies for building efficient microorganism and material interfaces. We begin with a brief introduction of the electron transfer mechanism in both the bioanode and biocathode of bioelectrochemical systems to understand the material-microorganism interface. Next, we summarise the strategies for constructing efficient material-microorganism interfaces including material design and modification and bacterial engineering. We also discuss emerging studies on the bio-inorganic hybrid electrocatalysis system. Understanding the interface between electrode/active materials and the microorganisms, especially the electron transfer processes, could help to drive the evolution of material-microorganism hybrid electrocatalysis systems towards maturity.

Functional Nanomaterial-Modified Anodes in Microbial Fuel Cells: Advances and Perspectives

Microbial fuel cell (MFC) is a promising approach that could utilize microorganisms to oxidize biodegradable pollutants in wastewater and generate electrical power simultaneously. Introducing advanced anode nanomaterials is generally considered as an effective way to enhance MFC performance by increasing bacterial adhesion and facilitating extracellular electron transfer (EET). This review focuses on the key advances of recent anode modification materials, as well as the current understanding of the microbial EET process occurring at the bacteria-electrode interface. Based on the difference in combination mode of the exoelectrogens and nanomaterials, anode surface modification, hybrid biofilm construction and single-bacterial surface modification strategies are elucidated exhaustively. The inherent mechanisms may help to break through the performance output bottleneck of MFCs by rational design of EET-related nanomaterials, and lead to the widespread application of microbial electrochemical systems.

3D Composite PDMS/MWCNTs Aerogel as High-Performing Anodes in Microbial Fuel Cells

Porous 3D composite materials are interesting anode electrodes for single chamber microbial fuel cells (SCMFCs) since they exploit a surface layer that is able to achieve the correct biocompatibility for the proliferation of electroactive bacteria and have an inner charge transfer element that favors electron transfer and improves the electrochemical activity of microorganisms. The crucial step is to fine-tune the continuous porosity inside the anode electrode, thus enhancing the bacterial growth, adhesion, and proliferation, and the substrate's transport and waste products removal, avoiding pore clogging. To this purpose, a novel approach to synthetize a 3D composite aerogel is proposed in the present work. A 3D composite aerogel, based on polydimethylsiloxane (PDMS) and multi-wall carbon nanotubes (MWCNTs) as a conductive filler, was obtained by pouring this mixture over the commercial sugar, used as removable template to induce and tune the hierarchical continuous porosity into final nanostructures. In this scenario, the granularity of the sugar directly affects the porosities distribution inside the 3D composite aerogel, as confirmed by the morphological characterizations implemented. We demonstrated the capability to realize a high-performance bioelectrode, which showed a 3D porous structure characterized by a high surface area typical of aerogel materials, the required biocompatibility for bacterial proliferations, and an improved electron pathway inside it. Indeed, SCMFCs with 3D composite aerogel achieved current densities of (691.7 ± 9.5) mA m^-2, three orders of magnitude higher than commercial carbon paper, (287.8 ± 16.1) mA m^-2.

General aspects and novel PEMss in microbial fuel cell technology: A review

The current scenario of energy production is mostly shifted towards sustainable renewable energy sources. Other than the energy production from natural resources such as sun, wind and water, microbial fuel cell system (MFC) has earned attraction in recent times. These microbial fuel cell systems are bioelectrochemical cell that possesses a unique ability to generate power as well as treats wastewater simultaneously. In this paper, an overview of the microbial fuel cell system and the effect of significant components on the performance of microbial fuel cell systems are reviewed. Firstly, the importance of the MFC system in power generation, its components, the working principle and various configurations of the MFC were briefly introduced. Biofilm plays a major role in the MFC system. Thus the importance of bio film, bio film formation and characterization techniques are summarised. Further, the review mainly addresses the mechanism of conventional and novel membrane materials on the performance of the MFC system. In addition, special emphasis on ceramic-based materials in the MFC system is presented. Finally, recent applications of the MFC systems are discussed.

Carbon nanotubes accelerates the bio-induced vivianite formation

Vivianite widely existed in digested sludge and activated sludge as a potential phosphate resource recovered from wastewater treatment plants (WWTPs). As an important product of extracellular electron transfer (EET) and biological iron reduction, the production of vivianite can be enhanced by conductive materials. Carbon nanotubes (CNTs) with excellent electrical conductivity have been reported to promote electron transfer, which was applied in wastewater treatment to accelerate the degradation of the contaminants. However, the impact of CNTs on vivianite formation was barely reported. In this study, the iron reduction, vivianite recovery, and the biotoxicity of CNTs were investigated in order to determine the influence of CNTs towards the vivianite production. The enhancement of vivianite production after CNTs adding reached up to 17 % by promoting the electron transfer between dissimilative iron-reducing bacteria (DIRB) and Fe(III). However, at the initial stage (0-24 h), Fe(III) reduction efficiency decreased by 81 % after inoculating with sewage sludge, which was attributed to CNTs destroying of the cell membrane (as indicated by SEM, CLSM and AFM analysis). The biotoxicity of CNTs stimulated DIRB to secret extracellular polymeric substances (EPS) and form bio-flocs to resist the physical puncture. After 48 h, the proportion of living DIRB in 1000 mg/L CNTs batch increased to 98 %, which was 79 % higher than 12 h. As a result, the vivianite recovery of raw sewage with 1000 mg/L CNTs increased to 44 ± 1 %, which was 33 % higher than that in the CNT-0.

3D Hierarchical Co8FeS8-FeCo2O4/N-CNTs@CF with an Enhanced Microorganisms-Anode Interface for Improving Microbial Fuel Cell Performance

Microbial fuel cells (MFCs) are promising ecofriendly techniques for harvesting bioenergy from organic and inorganic matter. Currently, it is challenging to design MFC anodes with favorable microorganism attachment and fast extracellular electron transfer (EET) rate for high MFC performance. Here we prepared N-doped carbon nanotubes (NCNTs) on carbon felt (CF) and used it as a support for growing hierarchical Co₈FeS₈-FeCo₂O₄/NCNTs core-shell nanostructures (FeCo/NCNTs@CF). We observed improved wettability, specific areal capacitance, and diffusion coefficient, as well as small charge transfer resistance compared with bare CF. MFCs equipped with FeCo/NCNTs@CF displayed a power density of 3.04 W/m² and COD removal amount of 221.0 mg/L/d, about 47.6 and 290.1% improvements compared with that of CF. Biofilm morphology and 16s rRNA gene sequence analysis proved that our anode facilitated the enrichment growth of exoelectrogens. Flavin secretion was also promoted on our hierarchical elelctrode, effectively driving the EET process. This work disclosed that hierarchical nanomaterials modified electrode with tailored physicochemical properties is a promising platform to simultaneously enhance exoelectrogen attachment and EET efficiency for MFCs.

Modular configurations of living biomaterials incorporating nano-based artificial mediators and synthetic biology to improve bioelectrocatalytic performance: A review

Currently, the industrial application of bioelectrochemical systems (BESs) that are incubated with natural electrochemically active microbes (EABs) is limited due to inefficient extracellular electron transfer (EET) by natural EABs. Notably, recent studies have identified several novel living biomaterials comprising highly efficient electron transfer systems allowing unparalleled proficiency of energy conversion. Introduction of these biomaterials into BESs could fundamentally increase their utilization for a wide range of applications. This review provides a comprehensive assessment of recent advancements in the design of living biomaterials that can be exploited to enhance bioelectrocatalytic performance. Further, modular configurations of abiotic and biotic components promise a powerful enhancement through integration of nano-based artificial mediators and synthetic biology. Herein, recent advancements in BESs are synthesized and assessed, including heterojunctions between conductive nanomaterials and EABs, in-situ hybrid self-assembly of EABs and nano-sized semiconductors, cytoprotection in biohybrids, synthetic biological modifications of EABs and electroactive biofilms. Since living biomaterials comprise a broad range of disciplines, such as molecular biology, electrochemistry and material sciences, full integration of technological advances applied in an interdisciplinary framework will greatly enhance/advance the utility and novelty of BESs. Overall, emerging fundamental knowledge concerning living biomaterials provides a powerful opportunity to markedly boost EET efficiency and facilitate the industrial application of BESs to meet global sustainability challenges/goals.

Cedar Wood-Based Biochar: Properties, Characterization, and Applications as Anodes in Microbial Fuel Cell

In this study, the relationship between pyrolysis temperature of woody biomass and physicochemical properties of derived biochar was investigated for microbial fuel cell (MFC) application. Physical and chemical properties of biochar were characterized for different pyrolysis temperatures. Results showed that biochar obtained at 400 °C was not conductor, while biochars prepared at 600 °C, 700 °C, and 900 °C exhibited decreased electrical resistivity of (7 ± 6) × 10³ Ω.m, (1.8 ± 0.2) Ω.m, and (16 ± 3) × 10^-3 Ω.m, respectively. Rising pyrolysis temperature from 400 to 700 °C exhibited honeycomb-like macroporous structures of biochar with an increase in the specific surface area from 310 to 484 m².g^-1. However, the production of biochar at 900 °C reduced its specific surface area to 136 m².g^-1 and caused the loss of the ordered honeycomb structure. MFCs using anodes based on biochar prepared at 900 °C produced maximum power densities ((9.9 ± 0.6) mW.m^-2) higher than that obtained with biochar pyrolyzed at 700 °C ((5.8 ± 0.1) mW.m^-2) and with conventional carbon felt anodes ((1.9 ± 0.2) mW.m^-2). SEM images of biochar-based anodes indicated the clogging of macropores in honeycomb structure of biochar prepared at 700 °C by growth of electroactive biofilms, which might impede the supply of substrate and the removal of metabolites from the inside of the electrode. These findings highlight that electrical conductivity of biochar is the major parameter for ensuring efficient anodes in microbial fuel cell application. Schematic representation of cedar wood-based biochar and its application as anode in MFC.

Enhanced performance of novel carbon nanotubes - sulfonated poly ether ether ketone (speek) composite proton exchange membrane in mfc application

Sulfonated poly ether ether ketone (SPEEK) nanocomposite proton exchange membrane (PEM) was prepared by incorporating multi-walled carbon nanotubes (CNT) at different weight percentages for microbial fuel cell (MFC) applications. Physico-chemical, thermal, mechanical and morphological characteristics of the prepared CNT-SPEEK composite membranes were analyzed using various techniques. Further, the water uptake capacity, Ion exchange capacity (IEC) and MFC performance of the CNT-SPEEK composite membranes were evaluated and compared with the pristine SPEEK membrane. Results show that incorporation of CNTs in SPEEK membranes exhibited a better water uptake capacity (34.18%-36.02%) and IEC (1.94-2.15 meq/g) compared to the SPEEK membrane. Improvement in membrane properties resulted in 2-fold higher power density compared to SPEEK membrane. Composite membrane with 0.75% CNT-SPEEK produced the higher power density (1.77 W/m²) in comparison with all the membranes evaluated. Chemical oxygen demand (COD) removal efficiency values of the MFC with SPEEK composite membranes were also found to be around 90%. Overall, the results reveal that CNT-SPEEK composite membrane as a potential PEM for MFC applications.

Review on Material and Design of Anode for Microbial Fuel Cell

Microbial Fuel Cell (MFC) is a bio-electrochemical system that generates electricity by anaerobic oxidation of substrates. An anode is the most critical component because the primary conversion of wastewater into electrons and protons takes place on the surface of the anode, where a biofilm is formed. This paper describes the essential properties of the anode and classifies its types according to the material used to make it. Anode material is responsible for the flow of electrons generated by the microorganism; hence biocompatibility and conductivity can considered to be the two most important properties. In this paper, the various modification strategies to improve the performance of anodes of MFC are explained through the review of researchers’ published work in this field. The shape and size of the anode turned out to be very significant as the microbial growth depends on the available surface area. The attachment of biofilm on the surface of an anode largely depends on the interfacial surface chemistry. Methods for improving MFC performance by altering the anode material, architecture, biocompatibility, and longevity are discussed with a future perspective giving special importance to the cost.

NiCo Alloy Nanoparticles on a N/C Dual-Doped Matrix as a Cathode Catalyst for Improved Microbial Fuel Cell Performance

The cathode material properties of the microbial fuel cell (MFC) have a quite important effect on their power generation capacity. Excellent oxygen reduction reaction (ORR) performance is the key to obtaining the remarkable capability of MFC. In this study, a series of catalysts are successfully prepared by a simple step-by-step hydrothermal, in situ growth, solution polymerization, and pyrolysis procedure. Here, the NiCo nanoparticles loading on nitrogen/carbon dual-doped matrix annealing at 800 °C (NiCo@DNC-800) under Ar shows good ORR activity with a maximum power density of 2325.60 ± 41.96 mW m^-2 in the case of the 2 mg cm^-2 minimal catalyst loading, and which is about 2.16 times more than that achieved by 20% Pt/C (1074.21 ± 39.36 mW m^-2 ). The unique N/C duel-doped matrix provides more graphitic-N and pyridinic-N that can reduce the resistance of electron diffusion and transport, together with the synergistic catalysis of NiCo active sites improving the oxygen reduction reaction performance of MFC greatly. In addition, the NiCo@DNC-800 cathode catalyst demonstrates that composite materials have great application potential in water pollution treatment and new green energy strategies.

Magnetized manganese-doped watermelon rind biochar as a novel low-cost catalyst for improving oxygen reduction reaction in microbial fuel cells

Microbial fuel cells (MFCs) are promising equipment for water treatment and power generation. The catalyst used in the oxygen reduction reaction (ORR) at the cathode is a critical factor for efficacy of MFCs. Therefore, it is important to develop cost-effective cathode catalysts to enhance application of MFCs. In the current study, a novel cathode catalyst was developed, which was annealed with watermelon rind as raw material and transition metals including iron, and manganese were introduced. The 700Mn/Fe@WRC catalyst, which was annealed at 700 °C, exhibited excellent electrochemical performance. The high relative content of pyridine nitrogen caused by the inherent nitrogen element of the watermelon rind and the high content of iron and manganese elements introduced resulted in increase in electrochemical surface area to 657.6 m²/g. The number of electrons transferred ORR was 3.96, indicating that ORR occurs through a four-electron pathway. The maximum power density of MFCs was 399.3 ± 7.4 mW/m² with a fitting total internal resistance of 15.242 Ω, and the removal efficiency of COD was 97.1 ± 1.2%. The cost of the 700Mn/Fe@WRC catalyst was approximately 0.15 $/g, which is significantly lower compared with Pt/C (33.0 $/g). Experimental verification showed that the 700Mn/Fe@WRC prepared using the economical watermelon rind biochar (WRC) is an excellent substitute for non-precious metal catalysts used in MFCs.

Evaluation of power generation and treatment efficiency of dairy wastewater in microbial fuel cell using TiO2 - SPEEK as proton exchange membrane

The aim of this study is to synthesise SPEEK composite proton exchange membrane with the addition of TiO₂ nanofillers for microbial fuel cell application. SPEEK composite membrane with varying weight percentage of TiO₂ (2.5, 5, 7.5 and 10%) was prepared to study the effect of TiO₂ concentration on membrane performance_. Synthesized composite membranes were subjected to various characterization studies such as FT-IR, XRD, Raman spectroscopy, TGA, UTM and SEM. Physico-chemical properties of membrane such as water uptake capacity, ion exchange capacity and thickness were also analyzed. 5% TiO₂ - SPEEK composite membrane exhibited the higher water uptake capacity value and Ion exchange capacity value of 31% and 1.71 meq/g respectively. Performance of the MFC system with TiO₂ - SPEEK membranes were evaluated and compared with the pristine SPEEK and Nafion membrane. 5% TiO₂ - SPEEK membrane produced the higher power density (1.22 W/m²) and voltage (0.635 V) than the other membranes investigated. Efficacy of MFC in wastewater treatment was evaluated based on the chemical oxygen demand (COD), total organic carbon content and turbidity. Biofilm growth over the surface of the electrodes was also analyzed using scanning electron microscopy.

Tuning of Electrode Surface for Enhanced Bacterial Adhesion and Reactions: A Review on Recent Approaches

The study of bacterial adhesion and its consequences has great significance in different fields such as marine science, renewable energy sectors, soil and plant ecology, food industry, and the biomedical field. Generally, the adverse effects of microbial surface interactions have attained wide visibility. However, herein, we present distinct approaches to highlight the beneficial aspects of microbial surface interactions for various applications rather than deal with the conventional negative aspects or prevention strategies. The surface microbial reactions can be tuned for useful biochemical or bio-electrochemical applications, which are otherwise unattainable through conventional routes. In this context, the present review is a comprehensive approach to highlight the basic principles and signature parameters that are responsible for the useful microbial-electrode interactions. It also proposes various surface tuning strategies, which are useful for tuning the electrode characteristics particularly suitable for the enhanced bacterial adhesion and reactions. The tuning of surface characteristics of electrodes is discussed with a special reference to the Microbial Fuel Cell as an example.

Carbon nanotubes mediating nano α-FeOOH reduction by Shewanella putrefaciens CN32 to enhance tetrabromobisphenol A removal

Carbon nanotubes (CNTs) mediation of the reduction of nano goethite (α-FeOOH) by Shewanella putrefaciens CN32 to improve the removal efficiency of tetrabromobisphenol A (TBBPA) was investigated in this study. The results showed that CNTs effectively promoted the biological reduction of α-FeOOH by strengthening the electron transfer process between Shewanella putrefaciens CN32 and α-FeOOH. After α-FeOOH was reduced to Fe(II), the adsorbed Fe(II) accounted for approximately 69.07% of the total Fe(II). And the secondary mineral vivianite was formed during the reduction of α-FeOOH, which was determined by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). The vivianite (Fe^II₃(PO₄)₂·8H₂O) was formed by the reaction of PO₄^3- and Fe(II). The degradation effect of TBBPA was the best at pH 8. CNT-α-FeOOH reduced the toxicity of TBBPA to CN32 and had good stability and reusability. The byproduct bisphenol A was detected which indicated that the degradation pathway of TBBPA involved reductive debromination. Electrochemical experiments and EPR analysis showed that the electron transfer capacities (ETC) of CNTs was an important factor in the removal of TBBPA, and it may greatly depend on semiquinone radicals (CO). This study provided a new method and theoretical support for the removal of TBBPA in the environment.

Microbial Fuel Cell: Recent Developments in Organic Substrate Use and Bacterial Electrode Interaction

A new bioelectrochemical approach based on metabolic activities inoculated bacteria, and the microbial fuel cell (MFC) acts as biocatalysts for the natural conversion to energy of organic substrates. Among several factors, the organic substrate is the most critical challenge in MFC, which requires long-term stability. The utilization of unstable organic substrate directly affects the MFC performance, such as low energy generation. Similarly, the interaction and effect of the electrode with organic substrate are well discussed. The electrode-bacterial interaction is also another aspect after organic substrate in order to ensure the MFC performance. The conclusion is based on this literature view; the electrode content is also a significant challenge for MFCs with organic substrates in realistic applications. The current review discusses several commercial aspects of MFCs and their potential prospects. A durable organic substrate with an efficient electron transfer medium (anode electrode) is the modern necessity for this approach.

Microbial Electrochemical Systems: Principles, Construction and Biosensing Applications

Microbial electrochemical systems are a fast emerging technology that use microorganisms to harvest the chemical energy from bioorganic materials to produce electrical power. Due to their flexibility and the wide variety of materials that can be used as a source, these devices show promise for applications in many fields including energy, environment and sensing. Microbial electrochemical systems rely on the integration of microbial cells, bioelectrochemistry, material science and electrochemical technologies to achieve effective conversion of the chemical energy stored in organic materials into electrical power. Therefore, the interaction between microorganisms and electrodes and their operation at physiological important potentials are critical for their development. This article provides an overview of the principles and applications of microbial electrochemical systems, their development status and potential for implementation in the biosensing field. It also provides a discussion of the recent developments in the selection of electrode materials to improve electron transfer using nanomaterials along with challenges for achieving practical implementation, and examples of applications in the biosensing field.

Coordinated response of Au-NPs/rGO modified electroactive biofilms under phenolic compounds shock: Comprehensive analysis from architecture, composition, and activity

Electroactive biofilms (EABs) can be integrated with conductive nanomaterials to boost extracellular electron transfer (EET) for achieving efficient waste treatment and energy conversion in bioelectrochemical systems. However, the in situ nanomaterial-modified EABs of mixed-culture, and their response under environmental stress are rarely revealed. Here, two nanocatalyst-decorated EABs were established by self-assembled Au nanoparticles-reduced graphene oxide (Au-NPs/rGO) in mixed-biofilms with different maturities, then their multi-property were analyzed under long-term phenolic shock. Results showed that the power density of Au-NPs/rGO decorated EABs was significantly enhanced by 28.66-42.82% due to the intensified EET pathways inside biofilms. Meanwhile, the electrochemical and catalytic performance of EABs were controllably regulated by 0.3-3.0 g/L phenolic compounds, which, however, resulted in differential alterations in their architecture, composition, and viability. EABs originated with higher maturity displayed more compact structure, lower thickness (110 μm), higher biomass (8.67 mg/cm²) and viability (0.85-0.91), endowing it better antishock ability to phenolic compounds. Phenolic-shock also induced the heterogeneous distribution of extracellular polymeric substances in terms of both spatial and bonding degrees of the decorated EABs, which could be regarded as an active response to strike a balance between self-protection and EET under environmental pressure. Our findings provide a broader understanding of microbe-electrode interactions in the micro-ecology interface and improve their performance in the removal of complex contaminants for sustainable remediation and new-energy development.

Bacteria-affinity aminated carbon nanotubes bridging reduced graphene oxide for highly efficient microbial electrocatalysis

Bioelectrochemical systems (BESs) exhibit great potential for simultaneous wastewater treatment and energy recovery. However, the efficiency of microbial electrocatalysis is fundamentally limited by the high resistance and poor biocompatibility of electrode materials. Herein, we construct a novel "binder-free" 3D biocompatible bioelectrode consists of 1D aminated carbon nanotubes (CNTs-NH₂) and 2D conductive reduced graphene oxide (rGO) nanosheets through one-step electrodeposition. As expected, the maximum current density reached to 3.25 ± 0.03 mA cm^-2 with the rGO@CNTs-NH₂ electrode, which is 4.33-fold higher than that of a bare rGO (0.75 ± 0.01 mA cm^-2), and is among the best performance reported for three-dimensional electrodes. The high microbial electrocatalytic activity is mainly attributed to the excellent performance of electron transfer and bacterial colonization, which originates from the 3D interconnecting scaffold, fast 1D CNTs "e-bridge" and positively charged surface.

Application of advanced anodes in microbial fuel cells for power generation: A review

Microbial fuel cells (MFCs) the most extensively described bioelectrochemical systems (BES), have been made remarkable progress in the past few decades. Although the energy and environment benefits of MFCs have been recognized in bioconversion process, there are still several challenges for practical applications on large-scale, particularly for relatively low power output by high ohmic resistance and long period of start-up time. Anodes serving as an attachment carrier of microorganisms plays a vital role on bioelectricity production and extracellular electron transfer (EET) between the electroactive bacteria (EAB) and solid electrode surface in MFCs. Therefore, there has been a surge of interest in developing advanced anodes to enhance electrode electrical properties of MFCs. In this review, different properties of advanced materials for decorating anode have been comprehensively elucidated regarding to the principle of well-designed electrode, power output and electrochemical properties. In particular, the mechanism of these materials to enhance bioelectricity generation and the synergistic action between the EAB and solid electrode were clarified in detail. Furthermore, development of next generation anode materials and the potential modification methods were also prospected.

Recent Advances in Anodes for Microbial Fuel Cells: An Overview

The recycling and treatment of wastewater using microbial fuel cells (MFCs) has been attracting significant attention as a way to control energy crises and water pollution simultaneously. Despite all efforts, MFCs are unable to produce high energy or efficiently treat pollutants due to several issues, one being the anode's material. The anode is one of the most important parts of an MFC. Recently, different types of anode materials have been developed to improve the removal rate of pollutants and the efficiency of energy production. In MFCs, carbon-based materials have been employed as the most commonly preferred anode material. An extensive range of potentials are presently available for use in the fabrication of anode materials and can considerably minimize the current challenges, such as the need for high quality materials and their costs. The fabrication of an anode using biomass waste is an ideal approach to address the present issues and increase the working efficiency of MFCs. Furthermore, the current challenges and future perspectives of anode materials are briefly discussed.

Investigation of CNT/PPy-Modified Carbon Paper Electrodes under Anaerobic and Aerobic Conditions for Phenol Bioremediation in Microbial Fuel Cells

The study presents the comparative bioelectrochemical treatment of phenol in anodic and cathodic compartments of four identical dual chambered microbial fuel cells (MFCs) with bare and multiwalled carbon nanotube/polypyrrole (MWCNT/PPy)-coated electrodes, respectively. It was observed that systems performing biocathodic treatment of phenol performed better as compared to the systems performing bioanodic treatment. The maximum power densities for bioanodic phenol treatment using bare and coated electrodes were found to be 469.038 and 560.719 mW/m2, while for biocathodic treatment, they were observed to be 604.804 and 650.557 mW/m2, respectively. The MFCs performing biocathodic treatment of phenol consistently showed higher chemical oxygen demand removal efficiency, Coulombic efficiency, and power density and indicated the better performance of the biocathodic bare (B-MFC) and coated (C-MFC) MFCs as compared to the bioanodic B-MFC and C-MFC. UV/vis spectrophotometry revealed that the MWCNT/PPy-coated carbon paper worked significantly better in the treatment of phenol with admirable treatment obtained within a week of the experiment as compared to the system with bare carbon paper. Cyclic voltammetry asserted better electrochemical activity of the MFC systems with coated electrodes in the treatment of phenol. The electrochemical impedance spectroscopy data also supported the better performance of biocathodic phenol treatment with lower internal and charge transfer resistances. The scanning electron microscopy images confirmed the active biofilm formation on the electrode surface. The study indicates MFC as a viable option for the treatment of recalcitrant chemical compounds with energy recovery.

Biofouling effects on the performance of microbial fuel cells and recent advances in biotechnological and chemical strategies for mitigation

The occurrence of biofouling in MFC can cause severe problems such as hindering proton transfer and increasing the ohmic and charge transfer resistance of cathodes, which results in a rapid decline in performance of MFC. This is one of the main reasons why scaling-up of MFCs has not yet been successfully accomplished. The present review article is a wide-ranging attempt to provide insights to the biofouling mechanisms on surfaces of MFC, mainly on proton exchange membranes and cathodes, and their effects on performance of MFC based on theoretical and practical evidence. Various biofouling mitigation techniques for membranes are discussed, including preparation of antifouling composite membranes, modification of the physical and chemical properties of existing membranes, and coating with antifouling agents. For cathodes of MFC, use of Ag nanoparticles, Ag-based composite nanoparticles, and antifouling chemicals is outlined in considerable detail. Finally, prospective techniques for mitigation of biofouling are discussed, which have not been given much previous attention in the field of MFC research. This article will help to enhance understanding of the severity of biofouling issues in MFCs and provides up-to-date solutions. It will be beneficial for scientific communities for further strengthening MFC research and will also help in progressing this cutting-edge technology to scale-up, using the most efficient methods as described here.

In situ generation of H2O2 using MWCNT-Al/O2 system and possible application for glyphosate degradation

Hydrogen peroxide (H₂O₂), as a green oxidant, has been widely applied into advanced oxidation processes (AOPs) for the degradation of toxic organic pollutants. The in situ generation of H₂O₂ can not only improve the storage and transportation safety of H₂O₂ but also reduce the capital and operation costs. In the present work, a novel system, i.e., multi-walled carbon nanotube‑aluminum (MWCNT-Al) composite was used to in situ generate H₂O₂ through micro-electrolysis. The MWCNT-Al composite was characterized and optimized. The accumulation concentration of H₂O₂ reached 947 mg/L at the initial pH of 9.0, the MWCNT-Al composite dosage of 8 g/L and oxygen gas flow rate of 400 mL/min after 60 min. The in situ generation of H₂O₂ was achieved by MWCNT-Al/O₂ system, mainly owing to the direct contact between Al⁰ and MWCNT in MWCNT-Al composite, which accelerated the transfer of electrons from Al⁰ to O₂, as well as the excellent electrocatalytic activity of MWCNT toward the two-electron reduction of oxygen. When H₂O₂ in situ generation technology was used in peroxone process (O₃/H₂O₂ process) to degrade glyphosate in aqueous solution, the removal efficiency of TOC and total phosphorus was 68.35% and 73.27%, respectively. Finally, the possible mechanism of in situ generation of H₂O₂ in MWCNT-Al/O₂ system was temporarily proposed.

Controlled Layer-By-Layer Deposition of Carbon Nanotubes on Electrodes for Microbial Fuel Cells

Carbon nanotubes (CNTs) and polyelectrolyte poly(allylamine hydrochloride) (PAH) composite modified indium tin oxide (ITO) electrodes, by a layer-by-layer (LBL) self-assembly technique, was evaluated as an anode for microbial fuel cells (MFCs). The bioelectrochemistry of Shewanella loihica PV-4 in an electrochemical cell and the electricity generation performance of MFCs with multilayer (CNTs/PAH)n-deposited ITO electrodes as an anode were investigated. Experimental results showed that the current density generated on the multilayer modified electrode increased initially and then decreased as the deposition of the number of layers (n = 12) increased. Chronoamperometric results showed that the highest peak current density of 34.85 ± 2.80 mA/m2 was generated on the multilayer (CNTs/PAH)9-deposited ITO electrode, of which the redox peak current of cyclic voltammetry was also significantly enhanced. Electrochemical impedance spectroscopy analyses showed a well-formed nanostructure porous film on the surface of the multilayer modified electrode. Compared with the plain ITO electrode, the multilayered (CNTs/PAH)9 anodic modification improved the power density of the dual-compartment MFC by 29%, due to the appropriate proportion of CNTs and PAH, as well as the porous nanostructure on the electrodes.

Bidirectional extracellular electron transfers of electrode-biofilm: Mechanism and application

The extracellular electron transfer (EET) between microorganisms and electrodes forms the basis for microbial electrochemical technology (MET), which recently have advanced as a flexible platform for applications in energy and environmental science. This review, for the first time, focuses on the electrode-biofilm capable of bidirectional EET, where the electrochemically active bacteria (EAB) can conduct both the outward EET (from EAB to electrodes) and the inward EET (from electrodes to EAB). Only few microorganisms are tested in pure culture with the capability of bidirectional EET, however, the mixed culture based bidirectional EET offers great prospects for biocathode enrichment, pollutant complete mineralization, biotemplated material development, pH stabilization, and bioelectronic device design. Future efforts are necessary to identify more EAB capable of the bidirectional EET, to balance the current density, to evaluate the effectiveness of polarity reversal for biocathode enrichment, and to boost the future research endeavors of such a novel function.

Electrochemical performance and microbial community analysis in air cathode microbial fuel cells fuelled with pyroligneous liquor

Microbial fuels cells (MFCs) have been applied for the degradation of pyroligneous liquor (PL) derived from apple tree branches, at different concentrations. The substrate removal, electrochemical properties, and microbial community characteristics were analysed to evaluate the performance of MFCs. Maximum current density (1.94 A/m²), coulombic efficiency (28%), and phenol removal rate (84%) were achieved with MFCs fed with PL at the optimal concentration of 1 g chemical oxygen demand (COD)/L. The polarisation test, cyclic voltammetry, and electrochemical impedance of the electrode redox reaction further explained how the addition of PL could stimulate formation of the electrochemically active biofilm, at the optimal concentration of 1 g COD/L. The microbial community of the anodic biofilm demonstrated that MFCs fed with 1 g COD/L had the highest relative abundance of the typical electrogenic bacteria Geobacter (33%), followed by Sphaerochaeta (6%) and Clostridium (4%). The results revealed that syntrophic interaction of these functional microorganisms contributed significantly to the PL degradation and electrical current generation.

Effects of Polymer Matrices and Carbon Nanotubes on the Generation of Electric Energy in a Microbial Fuel Cell

The anode of a microbial fuel cell (MFC) was formed on a graphite electrode and immobilized Gluconobacter oxydans VKM-1280 bacterial cells. Immobilization was performed in chitosan, poly(vinyl alcohol) or N-vinylpyrrolidone-modified poly(vinyl alcohol). Ethanol was used as substrate. The anode was modified using multiwalled carbon nanotubes. The aim of the modification was to create a conductive network between cell lipid membranes, containing exposed pyrroloquinoline quinone (PQQ)-dependent alcoholdehydrogenases, and the electrode to facilitate electron transfer in the system. The bioelectrochemical characteristics of modified anodes at various cell/polymer ratios were assessed via current density, power density, polarization curves and impedance spectres. Microbial fuel cells based on chitosan at a matrix/cell volume ratio of 5:1 produced maximal power characteristics of the system (8.3 μW/cm²) at a minimal resistance (1111 Ohm cm²). Modification of the anode by multiwalled carbon nanotubes (MWCNT) led to a slight decrease of internal resistance (down to 1078 Ohm cm²) and to an increase of generated power density up to 10.6 μW/cm². We explored the possibility of accumulating electric energy from an MFC on a 6800-μF capacitor via a boost converter. Generated voltage was increased from 0.3 V up to 3.2 V. Accumulated energy was used to power a Clark-type biosensor and a Bluetooth transmitter with three sensors, a miniature electric motor and a light-emitting diode.

One-year operation of 1000-L modularized microbial fuel cell for municipal wastewater treatment

This study constructed a 1000 L modularized MFC system, the largest volume so far, to treat practical municipal wastewater. This MFC system was operated under two different water flow connections in two municipal wastewater treatment plants (MWTP) for more than one year to test their treating abilities for wastewater with both low (average 80 mg L^-1) and high initial COD concentration (average 250 mg L^-1). The COD concentration in the effluent from the MFC system remained below 50 mg L^-1 with a removal rate of 70-90%, which stably met the level A of the first class in discharge standard of pollutants for MWTP of China. A maximum power density of 125 W m^-3 (7.58 W m^-2) was generated when the MFC system was fed with artificial wastewater, while it lay in a range of 7-60 W m^-3 (0.42-3.64 W m^-2) when treating municipal wastewater. The energy recovery of 0.033 ± 0.005 kWh per m³ of municipal wastewater was achieved, with a hydraulic retention time (HRT) of 2 h.

Quick start-up and performance of microbial fuel cell enhanced with a polydiallyldimethylammonium chloride modified carbon felt anode

It is of significant importance to simultaneously shorten the start-up time and enhance the electricity generation performance for practical application of microbial fuel cell (MFC). In this paper, the polydiallyldimethylammonium chloride (PDDA) modified carbon felt (PDDA-CF) electrode was prepared and used as the anode of PDDA-MFC. The anode significantly enhanced the start-up speed and electricity generation and dye wastewater degradation performances of the PDDA-MFC. The start-up time of PDDA-MFC is only 9 h, which is only 7.5% that of the unmodified carbon felt anode MFC (CF-MFC). The charge transfer resistance, the maximum output voltage and the maximum output power density of PDDA-MFC were 9.7 Ω, 741 mV and 537.8 mW m^-2 respectively, which were 70.3% lower than, 1.7 times and 3.3 times greater than those of CF-MFC respectively. In addition, the color and chemical oxygen demand (COD) removal rates of Reactive Brilliant Red X-3B for PDDA-MFC reached 95.94% and 64.24% at 24 h respectively, which were 41.5% and 51.2% higher than those of CF-MFC respectively. Due to the electrostatic attraction of PDDA, the adhesion and metabolic mass transfer rate of exoelectrogens are accelerated, thus the PDDA-CF electrode has excellent electrochemical properties and bio-affinity. This paper provides a new idea to enhance the start-up speed and performance of MFC simultaneously.