Urinary p-cresol diagnosis using nanocomposite of ZnO/MoS2 and molecular imprinted polymer on optical fiber based lossy mode resonance sensor

Molecularly Imprinted Polymer-Based Sensors Integrated with Transition Metal Dichalcogenides (TMDs) and MXenes: A Review

Molecularly imprinted polymer (MIP)-based electrochemical sensors have been extensively researched due to their higher sensitivity, quick response, and operational ease. To develop more advanced sensing devices with enhanced properties, MIPs have been integrated with two-dimensional (2D) layered materials such as transition metal dichalcogenides (TMDs) and MXenes. These 2D materials have unique electronic properties and an extended surface area, making them promising sensing materials that can improve the performance of MIPs. In this review article, we describe the methods used for the synthesis of TMDs and MXenes integrated MIP-based electrochemical sensors. Furthermore, we have provided a critical review of a wide range of analytes determined through the application of these electrochemical sensors. We also go over the influence of TMDs and MXenes on the binding kinetics and adsorption capacity which has enhanced binding recognition and sensing abilities. The combination of TMDs and MXenes with MIPs shows promising synergy in the development of highly efficient recognition materials. In the future, these sensors could be explored for a wider range of applications in environmental remediation, drug delivery, energy storage, and more. Finally, we address the challenges and future perspectives of using TMDs and MXenes integrated MIPs. We conclude with a focus on future development and the scope of integrating these materials in sensing technology.

A photoelectrochemical aptasensor for tetracycline based on the self-assembly of 2D MoS2 on a 3D ZnO/Au/ITO electrode

Two-dimensional (2D) layered MoS2 has good dispersion and adsorption properties, but being a narrow bandgap semiconductor limits its application in photoelectric sensing. In this study, a homogeneous photoelectrochemical sensor based on three-dimensional (3D) ZnO/Au/2D MoS2 is proposed for the ultrasensitive detection of tetracycline (TET). MoS2 is uniformly embedded on the 3D ZnO/Au surface by ordered self-assembly. The physical method of π-π interaction of MoS2 replaces the conventional use of chemically modifying aptamers on the electrode material surface. Under optimal conditions, this method has been successfully applied to the detection of TET in milk, honey, pig kidney and pork samples with reliable results. We believe that this study presents a method for the preparation of sensing carriers and target detection with great potential for application.

Sensing Approaches Exploiting Molecularly Imprinted Nanoparticles and Lossy Mode Resonance in Polymer Optical Fibers

In this work, two different lossy mode resonance (LMR) platforms based on plastic optical fibers (POFs) are developed and tested in a biochemical sensing scenario. The LMR platforms are based on the combination of two metal oxides (MOs), i.e., zirconium oxide (ZrO2) and titanium oxide (TiO2), and deposited on the exposed core of D-shaped POF chips. More specifically, two experimental sensor configurations were obtained by swapping the mutual position of the Mos films over to the core of the D-shaped POF probe. The POF-LMR sensors were first characterized as refractometers, proving the bulk sensitivities. Then, both the POF-LMR platforms were functionalized using molecularly imprinted nanoparticles (nanoMIPs) specific for human transferrin (HTR) in order to carry out binding tests. The achieved results report a bulk sensitivity equal to about 148 nm/RIU in the best sensor configuration, namely the POF-TiO2-ZrO2. In contrast, both optical configurations combined with nanoMIPs showed an ultra-low detection limit (fM), demonstrating excellent efficiency of the used receptor (nanoMIPs) and paving the way to disposable POF-LMR biochemical sensors that are easy-to-use, low-cost, and highly sensitive.

Soft molecularly imprinted nanoparticles with simultaneous lossy mode and surface plasmon multi-resonances for femtomolar sensing of serum transferrin protein

The simultaneous interrogation of both lossy mode (LMR) and surface plasmon (SPR) resonances was herein exploited for the first time to devise a sensor in combination with soft molecularly imprinting of nanoparticles (nanoMIPs), specifically entailed of the selectivity towards the protein biomarker human serum transferrin (HTR). Two distinct metal-oxide bilayers, i.e. TiO₂-ZrO₂ and ZrO₂-TiO₂, were used in the SPR-LMR sensing platforms. The responses to binding of the target protein HTR of both sensing configurations (TiO₂-ZrO₂-Au-nanoMIPs, ZrO₂-TiO₂-Au-nanoMIPs) showed femtomolar HTR detection, LODs of tens of fM and K_Dapp ~ 30 fM. Selectivity for HTR was demonstrated. The SPR interrogation was more efficient for the ZrO₂-TiO₂-Au-nanoMIPs configuration (sensitivity at low concentrations, S = 0.108 nm/fM) than for the TiO₂-ZrO₂-Au-nanoMIPs one (S = 0.061 nm/fM); while LMR was more efficient for TiO₂-ZrO₂-Au-nanoMIPs (S = 0.396 nm/fM) than for ZrO₂-TiO₂-Au-nanoMIPs (S = 0.177 nm/fM). The simultaneous resonance monitoring is advantageous for point of care determinations, both in terms of measurement's redundancy, that enables the cross-control of the measure and the optimization of the detection, by exploiting the individual characteristics of each resonance.

Removal of p-cresol using wash waters from lipopeptide production

This work shows the efficiency of wash waters from lipopeptide production as a remediation strategy to treat urban water samples contaminated with p-cresol. The harvesting step in surfactin production involved a centrifugation step, generating a major soluble fraction and a fraction that is adsorbed to the biomass. The adsorbed fraction was recovered by washing steps. These wash waters containing lipopeptides (mostly surfactins), were successfully used to adsorb and solubilize p-cresol. The method of decontamination applied to an artificially contaminated natural water was monitored using a biosensor based on laccase/magnetic nanoparticles. Given the amount of surfactin within the wash water, the removal of p-cresol from artificially contaminated water was approximately 46.0%. This result confirms the successful and sustainable application of surfactin-rich wash waters to remove p-cresol from artificially contaminated natural water. The adsorption mechanism is potentially based on a multi-layer adsorption process, considering Langmuir and Freundlich adsorption isotherms.

A review of Optical Point-of-Care devices to Estimate the Technology Transfer of These Cutting-Edge Technologies

Despite the remarkable development related to Point-of-Care devices based on optical technology, their difficulties when used outside of research laboratories are notable. In this sense, it would be interesting to ask ourselves what the degree of transferability of the research work to the market is, for example, by analysing the relation between the scientific work developed and the registered one, through patent. In this work, we provide an overview of the state-of-the-art in the sector of optical Point-of-Care devices, not only in the research area but also regarding their transfer to market. To this end, we explored a methodology for searching articles and patents to obtain an indicator that relates to both. This figure of merit to estimate this transfer is based on classifying the relevant research articles in the area and the patents that have been generated from these ones. To delimit the scope of this study, we researched the results of a large enough number of publications in the period from 2015 to 2020, by using keywords "biosensor", "optic", and "device" to obtain the most representative articles from Web of Science and Scopus. Then, we classified them according to a particular classification of the optical PoC devices. Once we had this sampling frame, we defined a patent search strategy to cross-link the article with a registered patent (by surfing Google Patents) and classified them accordingly to the categories described. Finally, we proposed a relative figure called Index of Technology Transference (IoTT), which estimates to what extent our findings in science materialized in published articles are protected by patent.

A highly selective molecularly imprinted electrochemical sensor with anti-interference based on GO/ZIF-67/AgNPs for the detection of p-cresol in a water environment

p-Cresol is a harmful phenolic substance that can cause serious effects on human health even at a low concentration in water. Therefore, the detection of p-cresol in a water environment is particularly important. In this paper, a novel zeolite imidazolate framework-67 (ZIF-67) material with regular morphology was prepared on the surface of graphene oxide doped with silver nanoparticles. The composite was modified on the glassy carbon electrode surface to increase the specific surface area, accelerate the electron transfer rate, enhance the current response and improve the performance of electrochemical sensors. Furthermore, a layer of p-cresol-molecularly imprinted polymer was prepared on the surface of the modified electrode by electropolymerization for the selective, rapid and sensitive detection of p-cresol, which greatly improved the specific recognition of p-cresol. Under optimal conditions, the prepared sensor had a good linear range of 1.0 × 10^-10 M to 1.0 × 10^-5 M with a detection limit as low as 5.4 × 10^-11 M, and it presented excellent reproducibility, stability and selectivity. Moreover, the sensor was successfully applied for the detection of trace p-cresol in a real water environment, providing a reliable assay for sensitive, rapid and selective detection of p-cresol in complex samples.

Cost-Effective Fiber Optic Solutions for Biosensing

In the last years, optical fiber sensors have proven to be a reliable and versatile biosensing tool. Optical fiber biosensors (OFBs) are analytical devices that use optical fibers as transducers, with the advantages of being easily coated and biofunctionalized, allowing the monitorization of all functionalization and detection in real-time, as well as being small in size and geometrically flexible, thus allowing device miniaturization and portability for point-of-care (POC) testing. Knowing the potential of such biosensing tools, this paper reviews the reported OFBs which are, at the moment, the most cost-effective. Different fiber configurations are highlighted, namely, end-face reflected, unclad, D- and U-shaped, tips, ball resonators, tapered, light-diffusing, and specialty fibers. Packaging techniques to enhance OFBs' application in the medical field, namely for implementing in subcutaneous, percutaneous, and endoscopic operations as well as in wearable structures, are presented and discussed. Interrogation approaches of OFBs using smartphones' hardware are a great way to obtain cost-effective sensing approaches. In this review paper, different architectures of such interrogation methods and their respective applications are presented. Finally, the application of OFBs in monitoring three crucial fields of human life and wellbeing are reported: detection of cancer biomarkers, detection of cardiovascular biomarkers, and environmental monitoring.

Surface modified chitosan-silica nanocomposite porous thin film based multi-parametric optical glucose sensor

In this work, a multi-parametric optical sensor based on chitosan-silica nanocomposite (CSNC) porous thin film has been developed for effective detection of glucose in pathological range. The CSNC films were surface functionalized with Glucose Oxidase enzyme via Glutaraldehyde crosslinking chains for better attachment of enzyme molecules on thin film surface. FESEM and FTIR were performed for morphological and compositional characterisation of the composite films. Five interlinked optical parameters, i.e., transmittance (T), reflectance (R), internal scattering (IS), surface scattering (SS) and output power (OP) were measured simultaneously using image processing environment for cost efficiency of the system. Effect of surface functionalization on individual parameter response was studied. It was observed that without surface functionalization only two parameters change significantly, while surface functionalization enables all five parameters. For lower and higher glucose concentration (< 17 mM and > 17 mM), IS and SS were found to be maximum sensitive among the five parameters, respectively. Maximum sensitivity of 1.2 mM^-1 in IS and 1 mM^-1 in SS were observed for surface functionalized samples. The sensor showed good sensitivity, selectivity and reproducibility in the dynamic range of 3-30 mM and LOD of the sensor was found to be 0.76 mM. CSNC sensors were found suitable for single-time use and as mass production is possible with little amount of composite solution (250 sensors with just 10-ml composite solution), the sensor fabrication method is very much cost efficient. Image processing-based multi-parametric sensing is a novel field itself and detailed study of surface modified CSNC glucose sensors utilizing such sensing system is a unique work having potential to significantly contribute in the field of multi-parametric label-free optical biosensor research.

Specific and quantitative detection of bacteria based on surface cell imprinted SERS mapping platform

Non-specificity and poor quantitative ability are the main challenges in surface-enhanced Raman scattering (SERS) technique, especially for the detection of bacteria in real samples. In this study, we presented a surface cell imprinted SERS mapping platform which is competent for the specific and quantitative detection of bacteria. The platform based on the fabrication of a surface cell imprinted substrate (SCIS) by which Escherichia coli (E. coli) can be captured and labelled by SERS tags which produces strong characteristic signal to indicate the capture of targets. We highlighted the specificity of this platform in the detection of E. coli, by comparing the performances toward Salmonella paratyphoid A, Bacillus subtilis, Enterococcus faecalis and Staphylococcus aureus. Upon integrating with SERS mapping technique, the platform displayed good quantitative ability toward E. coli with a wide linear range from 10² to 10⁸ CFU/mL and a low detection limit of ∼1.35 CFU/mL. Moreover, this novel SERS analysis platform was proved to be effective for E. coli detection in real probiotic beverage and chicken breast meat samples. By fabricating different SCISs, this platform can be replicated for the detection of other bacteria, which provides a promising application for real sample testing.

A Ratiometric Fiber Optic Sensor Based on CdTe QDs Functionalized with Glutathione and Mercaptopropionic Acid for On-Site Monitoring of Antibiotic Ciprofloxacin in Aquaculture Water

A ratiometric fluorescence fiber-optical sensor system (RFFS) merging a Y-type optical fiber spectrometer and CdTe QDs composite functionalized with glutathione and mercaptopropionic acid (GMPA@CdTe-QDs) for highly selective and on-site detection of ciprofloxacin (CIP) in environmental water samples was designed. Our preliminary results suggested that the red fluorescence of the synthesized GMPA@CdTe-QDs was effectively quenched by CIP. Based on this, the RFFS/GMPA@CdTe-QDs system was successfully fabricated and used for highly selective and rapid detection of CIP on site in the concentration range from 0 to 45 μM with the detection limit of 0.90 μM. The established method exhibited good interference resistance to the analogues of CIP and provided a great potential platform for real-time detection of CIP residues in environmental water. In addition, the fluorescence quenching mechanism of GMPA@CdTe-QDs by CIP was also investigated by means of temperature effect, fluorescence lifetime, ultraviolet (UV) visible absorption, and fluorescent spectra. Our results suggested clearly that the red fluorescence of GMPA@CdTe-QDs was quenched by CIP via the photoinduced electron-transfer (PET) mode.

2D Material-Based Optical Biosensor: Status and Prospect

The combination of 2D materials and optical biosensors has become a hot research topic in recent years. Graphene, transition metal dichalcogenides, black phosphorus, MXenes, and other 2D materials (metal oxides and degenerate semiconductors) have unique optical properties and play a unique role in the detection of different biomolecules. Through the modification of 2D materials, optical biosensor has the advantages that traditional sensors (such as electrical sensing) do not have, and the sensitivity and detection limit are greatly improved. Here, optical biosensors based on different 2D materials are reviewed. First, various detection methods of biomolecules, including surface plasmon resonance (SPR), fluorescence resonance energy transfer (FRET), and evanescent wave and properties, preparation and integration strategies of 2D material, are introduced in detail. Second, various biosensors based on 2D materials are summarized. Furthermore, the applications of these optical biosensors in biological imaging, food safety, pollution prevention/control, and biological medicine are discussed. Finally, the future development of optical biosensors is prospected. It is believed that with their in-depth research in the laboratory, optical biosensors will gradually become commercialized and improve people's quality of life in many aspects.

Recent Developments in Plasmonic Sensors of Phenol and Its Derivatives

Many scientists are increasingly interested in on-site detection methods of phenol and its derivatives because these substances have been universally used as a significant raw material in the industrial manufacturing of various chemicals of antimicrobials, anti-inflammatory drugs, antioxidants, and so on. The contamination of phenolic compounds in the natural environment is a toxic response that induces harsh impacts on plants, animals, and human health. This mini-review updates recent developments and trends of novel plasmonic resonance nanomaterials, which are assisted by various optical sensors, including colorimetric, fluorescence, localized surface plasmon resonance (LSPR), and plasmon-enhanced Raman spectroscopy. These advanced and powerful analytical tools exhibit potential application for ultrahigh sensitivity, selectivity, and rapid detection of phenol and its derivatives. In this report, we mainly emphasize the recent progress and novel trends in the optical sensors of phenolic compounds. The applications of Raman technologies based on pure noble metals, hybrid nanomaterials, and metal–organic frameworks (MOFs) are presented, in which the remaining establishments and challenges are discussed and summarized to inspire the future improvement of scientific optical sensors into easy-to-operate effective platforms for the rapid and trace detection of phenol and its derivatives.

Water Pollutants p-Cresol Detection Based on Au-ZnO Nanoparticles Modified Tapered Optical Fiber

In this work, a localized plasmon-based sensor is developed for para-cresol (p-cresol) - a water pollutant detection. A nonadiabatic [Formula: see text] of tapered optical fiber (TOF) has been experimentally fabricated and computationally analyzed using beam propagation method. For optimization of sensor's performance, two probes are proposed, where probe 1 is immobilized with gold nanoparticles (AuNPs) and probe 2 is immobilized with the AuNPs along with zinc oxide nanoparticles (ZnO-NPs). The synthesized metal nanomaterials were characterized by ultraviolet-visible spectrophotometer (UV-vis spectrophotometer) and transmission electron microscope (HR-TEM). The nanomaterials coating on the surface of the sensing probe were characterized by a scanning electron microscope (SEM). Thereafter, to increase the specificity of the sensor, the probes are functionalized with tyrosinase enzyme. Different solutions of p-cresol in the concentration range of [Formula: see text] - [Formula: see text] are prepared in an artificial urine solution for sensing purposes. Different analytes such as uric acid, β -cyclodextrin, L-alanine, and glycine are prepared for selectivity measurement. The linearity range, sensitivity, and limit of detection (LOD) of probe 1 are [Formula: see text] - [Formula: see text], 7.2 nm/mM (accuracy 0.977), and [Formula: see text], respectively; and for probe 2 are [Formula: see text] - [Formula: see text], 5.6 nm/mM (accuracy 0.981), and [Formula: see text], respectively. Thus, the overall performance of probe 2 is quite better due to the inclusion of ZnO-NPs that increase the biocompatibility of sensor probe. The proposed sensor structure has potential applications in the food industry and clinical medicine.

Transition metal dichalcogenides to optimize the performance of peptide-imprinted conductive polymers as electrochemical sensors

Molecularly imprinted polymer (MIP)-based electrochemical sensors for the protein α-synuclein (a marker for Parkinson's disease) were developed using a peptide epitope from the protein. MIPs doped with various concentrations and species of transition metal dichalcogenides (TMDs) to enhance conductivity were electropolymerized with and without template molecules. The current during the electropolymerization was compared with that associated with the electrochemical response (at 0.24~0.29 V vs. ref. electrode) to target peptide molecules in the finished sensor. We found that this relationship can aid in the rational design of conductive MIPs for the recognition of biomarkers in biological fluids. The sensing range and limit of detection of TMD-doped imprinted poly(AN-co-MSAN)-coated electrodes were 0.001-100 pg/mL and 0.5 fg/mL (SNR = 3), respectively. To show the potential applicability of the MIP electrochemical sensor, cell culture medium from PD patient-specific midbrain organoids generated from induced pluripotent stem cells was analyzed. α-Synuclein levels were found to be significantly reduced in the organoids from PD patients, compared to those generated from age-matched controls. The relative standard deviation and recovery are less than 5% and 95-115%, respectively. Preparation of TMD-doped α-synuclein (SNCA) peptide-imprinted poly(AN-co-MSAN)-coated electrodes.

Preparation, characterization, and application of soluble liquid crystalline molecularly imprinted polymer in electrochemical sensor

A novel soluble molecularly imprinted polymer (SMIP) without chemical cross-linker was successfully synthesized. The quinine (QN), which the structure was similar to the template, was chosen as the immobile template to improve the affinity of MIP. 4-Methyl phenyl dicyclohexyl ethylene (MPDE) was used as the liquid crystal (LC) monomer to increase the rigid of the composite. The cooperative effect of QN and MPDE was demonstrated by comparing with the conventional MIP, which synthesized without QN and MPDE. The polymerization conditions of SMIP including the ratio of MAA to MPDE, template to functional monomer, and HQN to QN were also optimized. Moreover, the characterizations of the SMIP were investigated by the transmission electron microscopy (TEM), field emission scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and nitrogen adsorption. In binding behavior, the SMIP presented the maximum adsorption capacity (0.37 ± 0.06 mmol/g) and imprinting factor (3.44 ± 0.25). And above all, the obtained polymer exhibited the solubility in the organic solution. In addition, the proposed SMIP as the electrochemical sensor exhibited a significant conductivity and sensitivity with the detection limit of 0.33 μM for HQN, the recoveries for the sample analysis varied from 97.4 to 100.8%, and the intra-day precision and inter-day precision were within 5.5% and 12.5%, respectively. It turned out that the SMIP had demonstrated more excellent potential than the traditional insoluble MIP in the development of the membrane-based electrochemical sensors.Graphical abstract.

Molecular Imprinted Polymers Coupled to Photonic Structures in Biosensors: The State of Art

Optical sensing, taking advantage of the variety of available optical structures, is a rapidly expanding area. Over recent years, whispering gallery mode resonators, photonic crystals, optical waveguides, optical fibers and surface plasmon resonance have been exploited to devise different optical sensing configurations. In the present review, we report on the state of the art of optical sensing devices based on the aforementioned optical structures and on synthetic receptors prepared by means of the molecular imprinting technology. Molecularly imprinted polymers (MIPs) are polymeric receptors, cheap and robust, with high affinity and selectivity, prepared by a template assisted synthesis. The state of the art of the MIP functionalized optical structures is critically discussed, highlighting the key progresses that enabled the achievement of improved sensing performances, the merits and the limits both in MIP synthetic strategies and in MIP coupling.

A Comprehensive Review: Materials for the Fabrication of Optical Fiber Refractometers Based on Lossy Mode Resonance

Lossy mode resonance based sensors have been extensively studied in recent years. The versatility of the lossy mode resonance phenomenon has led to the development of sensors based on different configurations that make use of a wide range of materials. The coating material is one of the key elements in the performance of a refractometer. This review paper intends to provide a global view of the wide range of coating materials available for the development of lossy mode resonance based refractometers.

In situ fabrication of aloe-like Au-ZnO micro/nanoarrays for ultrasensitive biosensing of catechol

Currently, the large-scale and controllable fabrication of nanostructures on substrates remains a great challenge for further practical applications. In this work, a novel 3D aloe-like Au-ZnO nanocomposite was designed for in situ synthesis on an ITO substrate, achieving real-time detection of trace catechol (CC) in water. A seed-assisted hydrothermal approach was proposed to control the crystal distribution and growth direction to build a ZnO aloe-like architecture. To eliminate the natural weak conductivity of ZnO, Au nanoparticles were further deposited on all ZnO arrays to construct Au-ZnO micro/nanostructures. The synergetic effects derived from the aloe-like ZnO with a large specific area and Au nanoparticles with high conductivity resulted in both high electrocatalysis and fast electron transfer in enzymatic reactions. After laccase immobilization, the as-prepared biosensor exhibited specific recognition of catechol among other dihydroxybenzenes and phenol with an ultrahigh sensitivity of 131 μA mM^-1, as well as an extremely wide linear range from 75 nM to 1100 μM and an ultralow detection limit of 25 nM. In addition, in the detection of real lake samples, this biosensor showed satisfactory anti-interference ability and provided reliable assay results.

Sandwich-Like Sensor for the Highly Specific and Reproducible Detection of Rhodamine 6G on a Surface-Enhanced Raman Scattering Platform

Nonspecificity and low reproducibility are always the main challenges in surface-enhanced Raman scattering (SERS) detection, especially for testing real samples. In this study, we developed a sandwich-like sensor (AuA-pMIP) to detect rhodamine 6G (R6G) by integrating a porous molecularly imprinted polymer (pMIP) with a well-ordered AuNP array (AuA). To form a uniformly distributed hot spot, AuA was fabricated at an oil-water interface and was subsequently fixed between pMIP and a support slide. Finite-difference time-domain simulation indicated that the enhanced electric field covered a distance of ∼2 μm above the AuA, in which the pMIP provided effective mass-transfer channels and sufficient specific binding sites for target molecules. High specificity for AuA-pMIP in R6G detection was demonstrated by comparing the SERS performance of R6G on AuA-pMIP with that of its structural analogues on the same sensor. Remarkably, the stable sandwich-like structure allowed us to achieve a recyclable SERS sensor with high reproducibility. Finally, AuA-pMIP displayed excellent specificity and sensitivity toward R6G in a test based on a real orange juice sample. This study presents a promising method to achieve real sample testing on a SERS platform.

Doping of transition metal dichalcogenides in molecularly imprinted conductive polymers for the ultrasensitive determination of 17β-estradiol in eel serum

Molecularly imprinted polymers (MIPs) have been developed to replace antibodies for the recognition of target molecules (such as antigens), and have been integrated into electrochemical sensing approaches by polymerization onto an electrode. Electrochemical sensing is inexpensive and flexible, and has demonstrated utility in point-of-care devices. In this work, several 2D (conductive) materials were employed to improve the performance of MIP sensors. Screen-printed electrodes were coated by the electropolymerization of aniline and metanilic acid, commingled with target molecules and various 2D materials. Tungsten disulfide (WS₂) with an average particle size of 2 μm was found to increase the sensitivity of detection of molecularly imprinted conductive polymer-coated electrodes to 17β-estradiol. As estradiol concentrations are important to eel aquaculture, we screened eel serum samples to determine their 17β-estradiol concentrations, which were found to be in the range 28.2 ± 3.6 to 73.0 ± 11.6 pg/mL after dilution. These results were in agreement with measurements using commercial immunoanalysis.

Functional nano-catalyzed pyrolyzates from branch of Cinnamomum camphora

Cinnamomum camphora is an excellent tree species for construction of forest construction of Henan Province, China. The diverse bioactive components of nano-catalyzed pyrolyzates form cold-acclimated C. camphora branch (CCB) in North China were explored. The raw powder of CCB treated with nano-catalyst (Ag, NiO, ¹/₂Ag + ¹/₂NiO) were pyrolyzed at two temperatures (550 °C and 700 °C), respectively. The main pyrolyzates are bioactive components of bioenergy, biomedicines, food additive, spices, cosmetics and chemical, whose total relative contents at 550 °C pyrolyzates are higher than those at 700 °C pyrolyzates. There are abundant components of spices and biomedicine at 550 °C pyrolyzates, while more spices and food additive at 700 °C pyrolyzates. At 550 °C, the content of biomedicine components reaches the highest by ¹/₂Ag + ¹/₂NiO nanocatalysis, while the contents of spices and food additive components reach the highest by NiO nanocatalysis. At 700 °C, the content of bioenergy components reaches the highest by ¹/₂Ag + ¹/₂NiO nanocatalysis, and the content of cosmetics components reaches the highest by Ag nanocatalysis. The findings suggested that the branch of the cold-acclimated C. camphora have the potential to develop into valued-added products of bioenergy, biomedicine, cosmetics, spices and food additive by nanocatalysis.

Lossy Mode Resonance-Based Glucose Sensor with High-κ Dielectric Film

In the past, high-κ dielectrics gained much attention because of the constant demand for increasingly smaller semiconductors. At the same time, in the field of optical sensing, high-κ dielectrics are key materials. This study presents the experimental investigations on a lossy mode resonance-based optical planar waveguide (LMROPW) sensor coated with a high-κdielectric of an indium tin oxide (ITO) layer. Two types of sensing structures were fabricated by coating (i) only a single-layer ITO (or bared LMROPW) and (ii) an ITO layer with glucose probes onto the optical planar waveguide (or boronic LMROPW) to detect glucose molecules. The sensing characteristics of these two types of sensors toward the surrounding analyte were determined using different concentrations of glucose solutions. It was found that the bared LMROPW sensor is only suitable for a higher concentration of glucose; the boronic LMROPW sensor with glucose probes on ITO could be applied to a lower-concentration solution to monitor glucose adsorption onto the sensing surface. Furthermore, with the advantages of a simple structure, easy alignment, and suitable production, the LMROPW sensor with a high-κ dielectric surface could be applied in clinical testing and diagnostics.

Molecularly Imprinted Polymer-Based Hybrid Materials for the Development of Optical Sensors

We report on the development of new optical sensors using molecularly imprinted polymers (MIPs) combined with different materials and explore the novel strategies followed in order to overcome some of the limitations found during the last decade in terms of performance. This review pretends to offer a general overview, mainly focused on the last 3 years, on how the new fabrication procedures enable the synthesis of hybrid materials enhancing not only the recognition ability of the polymer but the optical signal. Introduction describes MIPs as biomimetic recognition elements, their properties and applications, emphasizing on each step of the fabrication/recognition procedure. The state of the art is presented and the change in the publication trend between electrochemical and optical sensor devices is thoroughly discussed according to the new fabrication and micro/nano-structuring techniques paving the way for a new generation of MIP-based optical sensors. We want to offer the reader a different perspective based on the materials science in contrast to other overviews. Different substrates for anchoring MIPs are considered and distributed in different sections according to the dimensionality and the nature of the composite, highlighting the synergetic effect obtained as a result of merging both materials to achieve the final goal.

Synthesis and Applications of Molecularly Imprinted Polymers Modified TiO₂ Nanomaterials: A Review

Titanium dioxide (TiO₂) nanomaterials have caused a widespread concern in the past several decades for their bulk characteristics and potential applications in many different areas. Lately, the combination between molecularly imprinted polymers (MIPs) and TiO₂ nanomaterials have been proven to improve the relative adsorption capacity, selectivity and accelerate the rate of mass transfer of analyte which is not possible using TiO₂ alone. Considering the unique performance of the MIPs modified TiO₂ nanomaterials, this review intends to give an overview of the recent progresses in the development of MIPs modified TiO₂ nanomaterials, the potential applications of their tailor-made characteristics. The limitations and challenges in this practically promising nanomaterials have also been raised and summarized. By means of the points raised in this article, we would like to provide some assistance for further development of preparation methodologies and the expansion of some potential applications in the field of MIPs modified TiO₂ nanomaterials.

Rapid detection of Escherichia coli using fiber optic surface plasmon resonance immunosensor based on biofunctionalized Molybdenum disulfide (MoS2) nanosheets

The molybdenum disulfide (MoS₂) nanosheets functionalized fiber optic surface plasmon resonance (SPR) immunosensor has been reported for the sensitive detection of Escherichia coli (E. coli). The MoS₂ nanosheets were prepared by chemical exfoliation method. The synthesised nanostructures were characterized for their structural, morphological and optical properties. The E. coli monoclonal antibodies were successfully immobilized on the MoS₂ functionalized sensing platform via hydrophobic interactions. An alternative method simplifying the antibodies immobilization process by functionalization of 2D nanomaterial (MoS₂ nanosheets) for rapid (~15 mins) bacterial quantification is presented in this study. The immunosensor uses wavelength interrogation method and a strong linear relationship (R² = 0.994) was observed between spectral response of immunosensor and different concentration of E. coli. The nonspecificity and cross-reactivity studies of the developed immunosensor were investigated with detection of Salmonella Typhimurium and Staphylococcus aureus. To demonstrate the practical application, spiked samples of water and orange juice were analysed with acceptable recovery results. The label-free immunosensor exhibits better performance, detection limit (94 CFU/mL), high sensitivity (2.9 nm/1000 CFU mL^-1; 3135 nm/RIU) and profound specificity as compared to conventional fiber optic SPR sensor (detection limit: 391 CFU/mL, sensitivity: 0.6 nm/1000 CFU mL^-1; 1646 nm/RIU). This sensing platform shows promising applications in regular water and food quality monitoring for various pathogenic microorganisms.

A targeted metabolomic protocol for quantitative analysis of volatile organic compounds in urine of children with celiac disease

Volatile organic compounds (VOCs) in biological samples have gained popularity for disease monitoring and diagnosis. Celiac disease (CD) is one of the many prevalent health conditions which are challenging to diagnose. The aim of this study was to optimize a solid phase microextraction followed by gas chromatography-mass spectrometry, for quantitative analysis of a wide range of VOCs in the urine of patients with CD. Multivariate design of experiment was used to optimize the extraction conditions for the analysis of 15 urinary VOCs. Based on the performed experiments, extraction using 2.98 g of sodium chloride and 21 μL of 6 M hydrochloric acid for 15 min at 30 °C, using a CAR/PDMS fiber in headspace mode was found to be the most effective procedure for the analysis of the selected biomarkers. It was also demonstrated that the proposed method could distinguish between children with CD and healthy children based on the profile of VOCs. It is believed that quantitative analysis of these biomarkers will extend our understanding of CD and could be used for monitoring in patients under treatment.