Novel tungsten phosphide embedded nitrogen-doped carbon nanotubes: A portable and renewable monitoring platform for anticancer drug in whole blood

Artificial enzyme innovations in electrochemical devices: advancing wearable and portable sensing technologies

With the rapid evolution of sensing technologies, the integration of nanoscale catalysts, particularly those mimicking enzymatic functions, into electrochemical devices has surfaced as a pivotal advancement. These catalysts, dubbed artificial enzymes, embody a blend of heightened sensitivity, selectivity, and durability, laying the groundwork for innovative applications in real-time health monitoring and environmental detection. This minireview penetrates into the fundamental principles of electrochemical sensing, elucidating the unique attributes that establish artificial enzymes as foundational elements in this field. We spotlight a range of innovations where these catalysts have been proficiently incorporated into wearable and portable platforms. Navigating the pathway of amalgamating these nanoscale wonders into consumer-appealing devices presents a multitude of challenges; nevertheless, the progress made thus far signals a promising trajectory. As the intersection of materials science, biochemistry, and electronics progressively intensifies, a flourishing future seems imminent for artificial enzyme-infused electrochemical devices, with the potential to redefine the landscapes of wearable health diagnostics and portable sensing solutions.

An electrochemical sensor based on synergistic enhancement effects between nitrogen-doped carbon nanotubes and copper ions for ultrasensitive determination of anti-diabetic metformin

Metformin (MET) is the primary medicine for type II diabetes, which produces carcinogenic byproducts during chlorine disinfection, so the detection of MET in aqueous environment is crucial. In this work, an electrochemical sensor based on nitrogen-doped carbon nanotubes (NCNT) has been constructed for ultrasensitive determination of MET in the presence of Cu(II) ions. The excellent conductivity and rich π-conjugated structure of NCNT facilitate the electron transfer rate of fabricated sensor and benefit the adsorption of cation ions. Cu(II) ions can chelate with MET to form MET-Cu(II) complex, which are easily accumulated on the surface of NCNT through cation-π interaction. Attributing to the synergistic enhancement effects of NCNT and Cu(II) ions, the fabricated sensor exhibits excellent analytical performances with a low detection limit of 9.6 nmol L^-1, high sensitivity of 64.97 A mol^-1 cm^-2 and wide linear range of 0.3-10 μmol L^-1. The sensing system has been successfully applied for rapid (20 s) and selective determination of MET in real water samples with satisfactory recoveries (90.2 %-108.8 %). This study provides a robust strategy for MET detection in aqueous environment and holds great promise for rapid risk assessment and early warning of MET.

Electrochemical Biosensors for Whole Blood Analysis: Recent Progress, Challenges, and Future Perspectives

Whole blood, as one of the most significant biological fluids, provides critical information for health management and disease monitoring. Over the past 10 years, advances in nanotechnology, microfluidics, and biomarker research have spurred the development of powerful miniaturized diagnostic systems for whole blood testing toward the goal of disease monitoring and treatment. Among the techniques employed for whole-blood diagnostics, electrochemical biosensors, as known to be rapid, sensitive, capable of miniaturization, reagentless and washing free, become a class of emerging technology to achieve the target detection specifically and directly in complex media, e.g., whole blood or even in the living body. Here we are aiming to provide a comprehensive review to summarize advances over the past decade in the development of electrochemical sensors for whole blood analysis. Further, we address the remaining challenges and opportunities to integrate electrochemical sensing platforms.

Electrochemistry as a Powerful Tool for Investigations of Antineoplastic Agents: A Comprehensive Review

Cancer is most frequently treated with antineoplastic agents (ANAs) that are hazardous to patients undergoing chemotherapy and the healthcare workers who handle ANAs in the course of their duties. All aspects related to hazardous oncological drugs illustrate that the monitoring of ANAs is essential to minimize the risks associated with these drugs. Among all analytical techniques used to test ANAs, electrochemistry holds an important position. This review, for the first time, comprehensively describes the progress done in electrochemistry of ANAs by means of a variety of bare or modified (bio)sensors over the last four decades (in the period of 1982-2021). Attention is paid not only to the development of electrochemical sensing protocols of ANAs in various biological, environmental, and pharmaceutical matrices but also to achievements of electrochemical techniques in the examination of the interactions of ANAs with deoxyribonucleic acid (DNA), carcinogenic cells, biomimetic membranes, peptides, and enzymes. Other aspects, including the enantiopurity studies, differentiation between single-stranded and double-stranded DNA without using any label or tag, studies on ANAs degradation, and their pharmacokinetics, by means of electrochemical techniques are also commented. Finally, concluding remarks that underline the existence of a significant niche for the basic electrochemical research that should be filled in the future are presented.

Laser-scribed Graphene Electrodes Functionalized with Nafion/Fe3O4 Nanohybrids for the Ultrasensitive Detection of Neurotoxin Drug Clioquinol

The analysis of pharmaceutical active ingredients plays an important role in quality control and clinical trials because they have a significant physiological effect on the human body even at low concentrations. Herein, a flexible three-electrode system using laser-scribed graphene (LSG) technology, which consists of Nafion/Fe₃O₄ nanohybrids immobilized on LSG as the working electrode and LSG counter and reference electrodes on a single polyimide film, is presented. A Nafion/Fe₃O₄/LSG electrode is constructed by drop coating a solution of Nafion/Fe₃O₄, which is electrostatically self-assembled between positively charged Fe₃O₄ and negatively charged Nafion on the LSG electrode and is used for the first time to determine a neurotoxicity drug (clioquinol; CQL) in biological samples. Owing to their porous 3D structure, an enriched surface area at the active edges and polar groups (OH, COOH, and -SO₃H) in Nafion/Fe₃O₄/LSG electrodes resulted in excellent wettability to facilitate electrolyte diffusion, which gave ∼twofold enhancement in electrocatalytic activity over LSG electrodes. The experimental parameters affecting the analytical performance were investigated. The quantification of clioquinol on the Nafion/Fe₃O₄/LSG electrode surface was examined using differential pulse voltammetry and chronoamperometry techniques. The fabricated sensor displays preferable sensitivity (17.4 μA μM^-1 cm^-2), a wide linear range (1 nM to 100 μM), a very low detection limit (0.73 nM), and acceptable selectivity toward quantitative analysis of CQL. Furthermore, the reliability of the sensor was checked by CQL detection in spiked human blood serum and urine samples, and satisfactory recoveries were obtained.

Simultaneous and selective electrochemical sensing of methotrexate and folic acid in biological fluids and pharmaceutical samples using Fe3O4/ppy/Pd nanocomposite modified screen printed graphite electrode

The purpose of this study was to fabricate an electrochemical sensor for the detection of methotrexate and folic acid based on a screen-printed graphite electrode (SPGE) modified with prepared iron oxide (Fe₃O₄)/polypyrrole (ppy)/Palladium (Pd) nanocomposite. Transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FT-IR) techniques were employed to characterize the Fe₃O₄/ppy/Pd nanocomposite. The produced modifier was used to induce a remarkable electrocatalytic impact relative to the oxidation of methotrexate, which caused the potential peak shift to a less positive amount (from 800 mV to about 500 mV) and improved the peak current (from 5.3 μA to about 16 μA). Methotrexate peak current was linearly dependent on its concentration from 0.03100.0 μM and the limit of detection (LOD) was estimated at 7.0 nM. The methotrexate and folic acid were co-detected by the proposed sensor. The experimental results indicated that the oxidation peaks of methotrexate and folic acid were separated about 200 mV in phosphate buffer solution (PBS) at pH 7.0. Fe₃O₄/ppy/Pd/SPGE was successfully able to detect methotrexate and folic acid in pharmaceutical and biological samples with excellent recovery.

Carbon nanotubes in biomedical applications: current status, promises, and challenges

In the past decade, there has been phenomenal progress in the field of nanomaterials, especially in the area of carbon nanotubes (CNTs). In this review, we have elucidated a contemporary synopsis of properties, synthesis, functionalization, toxicity, and several potential biomedical applications of CNTs. Researchers have reported remarkable mechanical, electronic, and physical properties of CNTs which makes their applications so versatile. Functionalization of CNTs has been valuable in modifying their properties, expanding their applications, and reducing their toxicity. In recent years, the use of CNTs in biomedical applications has grown exponentially as they are utilized in the field of drug delivery, tissue engineering, biosensors, bioimaging, and cancer treatment. CNTs can increase the lifespan of drugs in humans and facilitate their delivery directly to the targeted cells; they are also highly efficient biocompatible biosensors and bioimaging agents. CNTs have also shown great results in detecting the SARS COVID-19 virus and in the field of cancer treatment and tissue engineering which is substantially required looking at the present conditions. The concerns about CNTs include cytotoxicity faced in in vivo biomedical applications and its high manufacturing cost are discussed in the review.

Recent Advances in Portable Biosensors for Biomarker Detection in Body Fluids

A recent development in portable biosensors allows rapid, accurate, and on-site detection of biomarkers, which helps to prevent disease spread by the control of sources. Less invasive sample collection is necessary to use portable biosensors in remote environments for accurate on-site diagnostics and testing. For non- or minimally invasive sampling, easily accessible body fluids, such as saliva, sweat, blood, or urine, have been utilized. It is also imperative to find accurate biomarkers to provide better clinical intervention and treatment at the onset of disease. At the same time, these reliable biomarkers can be utilized to monitor the progress of the disease. In this review, we summarize the most recent development of portable biosensors to detect various biomarkers accurately. In addition, we discuss ongoing issues and limitations of the existing systems and methods. Lastly, we present the key requirements of portable biosensors and discuss ideas for functional enhancements.

A novel three-dimensional network of CuCr2O4/CuO nanofibers for voltammetric determination of anticancer drug methotrexate

Considering the importance of measuring anticancer drugs, a carbon paste electrode (CPE) modified with CuCr₂O₄/CuO nanofibers in the presence of hydrophobic ionic liquid (IL) was fabricated for methotrexate (MTX) sensing. CuCr₂O₄/CuO nanofibers were prepared by electrospinning method. Then, the morphology and structure of the nanofibers were studied by scanning electron microscopy, thermal analysis, X-ray diffraction, energy-dispersive X-ray, map analysis, and FT-IR spectroscopy. The electrochemical behavior of MTX at CuCr₂O₄/CuO/IL/CPE surface was studied using cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy. After optimization of the experimental parameters, the prepared sensor showed a low detection limit of 25 nM MTX, based on signal-to-noise (S/N = 3), and it can determine in a wide range of 0.1-300 μM in Britton-Robinson buffer solution at pH 2.5. The modified electrode was used to determine MTX concentration in blood and urine samples with good recoveries of 94.1-104.3. This sensor has several advantages such as low cost, easy preparation, high-performance speed and high sensitivity, selectivity, stability, and repeatability. Graphical abstract Scheme of preparation of CuCr₂O₄/CuO nanofibers by electrospinning method and design of a carbon past electrode using prepared nanofibers (CuCr₂O₄/CuO/IL/CPE). This electrode was used for methotrexate determination in plasma and urine samples using differential pulse voltammetry.

Ultrafine Co3O4 nanolayer-shelled CoWP nanowire array: a bifunctional electrocatalyst for overall water splitting

The development of bifunctional electrocatalysts based on highly efficient non-noble metals is pivotal for overall water splitting. Here, a composite electrode of Co₃O₄@CoWP is synthesized, where an ultrathin layer composed of Co₃O₄ nanoparticles is grown on CoWP nanowires supported on a carbon cloth (CC). The Co₃O₄@CoWP/CC electrode exhibits excellent electrocatalytic activity and improved kinetics towards both the oxygen and hydrogen evolution reactions (OER and HER). The Co₃O₄@CoWP/CC electrode achieves a current density of 10 mA cm⁻² at a low overpotential of 269 mV for the OER and −10 mA cm⁻² at 118 mV for the HER in 1.0 M KOH solution. The voltage applied to a two-electrode water electrolyzer for overall water splitting, while employing the Co₃O₄@CoWP/CC electrode as both an anode and a cathode, in order to reach a current density of 10 mA cm⁻², is 1.61 V, which is better than that for the majority of reported non-noble electrocatalysts. Moreover, the Co₃O₄@CoWP/CC electrode exhibits good stability over 24 h with slight attenuation. The electrode benefits from the enhanced adsorption of oxygen intermediates on Co₃O₄ during the OER, the increased ability for water dissociation and the optimized H adsorption/desorption ability of CoWP nanowires during the HER. This study provides a feasible approach for cost-effective and high-performance non-noble metal bifunctional catalysts for overall water electrolysis.

A hierarchical 3D self-supporting CoWP nanowire array shelled with an ultrathin Co₃O₄ nanolayer on carbon cloth (Co₃O₄@CoWP/CC) exhibits superior overall water electrolysis capability.

Recent advances in the use of carbon nanotubes as smart biomaterials

Carbon nanotubes (CNTs) have remarkable mechanical, thermal, electronic, and biological properties due to their particular atomic structure made of graphene sheets that are rolled into cylindrical tubes. Due to their outstanding properties, CNTs have been used in several technological fields. Currently, the most prominent research area of CNTs focuses on biomedical applications, using these materials to produce hybrid biosensors, drug delivery systems, and high performance composites for implants. Although a great number of research studies have already shown the advantages of CNT-based biomedical devices, their clinical use for in vivo application has not been consummated. Concerns related to their toxicity, biosafety, and biodegradation still remain. The effect of CNTs on the human body and the ecosystem is not well established, especially due to the lack of standardization of toxicological tests, which generate contradictions in the results. CNTs' toxicity must be clarified to enable the medical use of these exceptional materials in the near future. In this review, we summarize recent advances in developing biosensors, drug delivery systems, and implants using CNTs as smart biomaterials to identify pathogens, load/deliver drugs and enhance the mechanical and antimicrobial performance of implants.