Highly sensitive and specific on-site detection of serum cocaine by a low cost aptasensor

Label-free SERS-ML detection of cocaine trace in human blood plasma

The widespread consumption of cocaine poses a significant threat to modern society. The most effective way to combat this problem is to control the distribution of cocaine, based on its accurate and sensitive detection. Here, we proposed the detection of cocaine in human blood plasma using a combination of surface enhanced Raman spectroscopy and machine learning (SERS-ML). To demonstrate the efficacy of our proposed approach, cocaine was added into blood plasma at various concentrations and drop-deposited onto a specially prepared disposable SERS substrate. SERS substrates were created by deposition of metal nanoclusters on electrospun polymer nanofibers. Subsequently, SERS spectra were measured and as could be expected, the manual distinguishing of cocaine from the spectra proved unfeasible, as its signal was masked by the background signal from blood plasma molecules. To overcome this issue, a database of SERS spectra of cocaine in blood plasma was collected and used for ML training and validation. After training, the reliability of proposed approach was tested on independently prepared samples, with unknown for SERS-ML cocaine presence or absence. As a result, the possibility of rapid determination of cocaine in blood plasma with a probability above 99.5% for cocaine concentrations up to 10-14 M was confirmed. Therefore, it is evident that the proposed approach has the ability to detect trace amounts of cocaine in bioliquids in an express and simple manner.

Stepwise Au decoration-assisted double signal amplified lateral flow strip for ultrasensitive detection of morphine in fingerprint sweat

Point-of-care testing (POCT) of morphine (MOP) without invasion of privacy is of critical importance for law-enforcement departments to realize on-site rapid screening. In this study, ultrasensitive and non-invasive screening of MOP residues in the fingerprint sweat was easily realized by stepwise Au decoration-assisted double signal amplification and antibody-saving strategies on lateral flow strip (LFS). The construction of LFS was not intrinsically changed compared with traditional LFS except the labeling material on conjugation pad for enhanced signal reporting. The gold nanoparticle-seeded SiO2 was adopted as the labeling materials in place of traditional gold nanoparticles, which acted as the first-round signal amplification and ready for second-round gold deposition-assisted amplification. And the second-round amplification could be completed in just 10 s, which did not alter the intrinsic simplicity of LFS for rapid and on-site screening. With the designed signal amplification principle of LFS, target MOP in the fingerprint sweat can be effectively transferred to the LFS for analysis without invasion of privacy. As low as 0.5 pg MOP in fingerprint sweat can be visually judged with this double signal amplified LFS, the sensitivity of which has been improved at least 10-fold compared with traditional Au-labeled LFS, guaranteeing accurate screening of trace MOP in the fingerprint sweat. Of great importance, the consumption of valuable antibody can be reduced to just 1/20, which greatly reduces the cost of high-throughput screening. This stepwise Au decoration-assisted double signal amplified LFS holds great potential in the ultrasensitive screening of trace analytes in various fields and further widens the application scope of lateral flow strips.

Two-Dimensional Conductive Metal-Organic Framework for Small-Molecule Sensing in Aqueous Solution

Two-dimensional (2D) conductive metal-organic frameworks (cMOFs) have emerged as powerful transducers for electrochemical sensing. However, electrochemical sensing in aqueous solutions remains at a very early stage for 2D cMOFs. Herein, the interfacial capacitances of a 2D cMOF are utilized for electrochemical sensing for the first time. Various redox-innocent compounds along with redox-active compounds in aqueous solutions are successfully detected based on the responses of two capacitance peaks at low voltages. The quantitative sensitivity to ascorbic acid is even an order of magnitude higher than the previous voltammetric method. Further investigation demonstrates that the responses are rooted in the pseudocapacitances of the 2D cMOF, i.e., the transitions among the multiple redox states of the ligands. The analytes are suggested to alert the d-p conjugation and exchange electrons with the 2D cMOF. These deep insights in response mechanisms represent an important step for promoting the application of 2D cMOFs in chemical sensing.

The Establishment of a Tobramycin-Responsive Whole-Cell Micro-Biosensor Based on an Artificial Ribozyme Switch

In this study, a tobramycin concentration-dependent whole-cell micro-biosensor (tob-HHAz) was constructed by fusing a tobramycin aptamer with a hammerhead ribozyme (HHR) from Schistosoma mansoni. The biosensor was obtained by integrating all the modules into one complete RNA sequence, which was easily introduced into E. coli without suffering from harsh external environments. Three independent tobramycin-sensitive RNA structures were identified via high-throughput screening in vivo and were further verified in vitro to undergo the desired self-cleavage reaction. The computation prediction of the RNA structure was performed to help analyze the mechanisms of various conformations by performing a qualitative and rapid detection of tobramycin in practical samples; two sensors exhibited high responsiveness to spiked milk, with a detection limit of around 40 nM, which is below the EU's antibiotic maximum residual level. One of the structures provides a linear range from 30 to 650 nM with a minimum detection limit of 30 nM and showed relatively good selectivity in spiked urine. This study is the first in which in vivo screening was combined with computation analysis to optimize the pivotal structure of sensors. This strategy enables researchers to use artificial ribozyme-based biosensors not only for antibiotic detection but also as a generally applicable method for the further detection of substances in living cells.

Microfluidic nanodevices for drug sensing and screening applications

The outbreak of pandemics (e.g., severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2 in 2019), influenza A viruses (H1N1 in 2009), etc.), and worldwide spike in the aging population have created unprecedented urgency for developing new drugs to improve disease treatment. As a result, extensive efforts have been made to design novel techniques for efficient drug monitoring and screening, which form the backbone of drug development. Compared to traditional techniques, microfluidics-based platforms have emerged as promising alternatives for high-throughput drug screening due to their inherent miniaturization characteristics, low sample consumption, integration, and compatibility with diverse analytical strategies. Moreover, the microfluidic-based models utilizing human cells to produce in-vitro biomimetics of the human body pave new ways to predict more accurate drug effects in humans. This review provides a comprehensive summary of different microfluidics-based drug sensing and screening strategies and briefly discusses their advantages. Most importantly, an in-depth outlook of the commonly used detection techniques integrated with microfluidic chips for highly sensitive drug screening is provided. Then, the influence of critical parameters such as sensing materials and microfluidic platform geometries on screening performance is summarized. This review also outlines the recent applications of microfluidic approaches for screening therapeutic and illicit drugs. Moreover, the current challenges and the future perspective of this research field is elaborately highlighted, which we believe will contribute immensely towards significant achievements in all aspects of drug development.

Advances in riboswitch-based biosensor as food samples detection tool

Food safety has always been a hot issue of social concern, and biosensing has been widely used in the field of food safety detection. Compared with traditional aptamer-based biosensors, aptamer-based riboswitch biosensing represents higher precision and programmability. A riboswitch is an elegant example of controlling gene expression, where the target is coupled to the aptamer domain, resulting in a conformational change in the downstream expression domain and determining the signal output. Riboswitch-based biosensing can be extensively applied to the portable real-time detection of food samples. The numerous key features of riboswitch-based biosensing emphasize their sustainability, renewable, and testing, which promises to transform engineering applications in the field of food safety. This review covers recent developments in riboswitch-based biosensors. The brief history, definition, and modular design (regulatory mode, reporter, and expression platform) of riboswitch-based biosensors are explained for better insight into the design and construction. We summarize recent advances in various riboswitch-based biosensors involving theophylline, malachite green, tetracycline, neomycin, fluoride, thrombin, naringenin, ciprofloxacin, and paromomycin, aiming to provide general guidance for the design of riboswitch-based biosensors. Finally, the challenges and prospects are also summarized as a way forward stratagem and signs of progress.

An ultrasensitive detection platform for cocaine: Aptasensing strategy in capillary tube

Cocaine as a detrimental addictive drug threats human health through inducing heart problem, blood pressure, anxiety, immunodeficiency, paranoia, and organ damage. Thus, the quantification of cocaine in the biological samples by a simple, high specificity, and fast method is highly urgent to decrease the harmful effect of the misuse of this drug. In this study, we constructed a novel fluorescent aptasensor by combining the fluorescein (FAM)-modified specific aptamer and AuNPs in a capillary tube as the sensing substrate for the first time. The presence of cocaine recovered the fluorescence response of the aptasensor through interaction with the aptamer and differentiation of the aptamer@AuNPs complex. By fluorescence microscopy imaging of the aptasensor substrate and its quantitative analysis, a remarkable linear range from 100 pM to 600 µM and the ultra-low limit of detection (LOD) as 0.31 pM were achieved for the target detection. Cocaine was successfully quantified in the real samples (human serum and urine) by using the aptasensor. The aptasensor is simple, easy-to-use, favorable applicability, and cost-effective; and to the best of our knowledge, it is the first use of the capillary tube as a sensing platform just by using about 3 μl of the samples. It is also an easy-to-carry tool, promising for the on-site target detection. Besides, it can be a portable device for monitoring cocaine by using a handheld single-beam fluorescence microscope. It can be an appropriate detection tool in forensic science and medicine.

Nanobiosensors for detection of opioids: A review of latest advancements

Opioids are generally used as analgesics in pain treatment. Like many drugs, they have side effects when overdosing and causeaddiction problems.Illegal drug use and misuse are becoming a major concern for authorities worldwide; thus, it is critical to have precise procedures for detecting them in confiscated samples, biological fluids, and wastewaters. Routine blood and urine tests are insufficient for highly selective determinations and can cause cross-reactivities. For this purpose, nanomaterial-based biosensors are great tools to determine opioid intakes, continuously monitoring the drugs with high sensitivity and selectivity even at very low sample volumes.Nanobiosensors generally comprise a signal transducer nanostructure in which a biological recognition molecule is immobilized onto its surface. Lately, nanobiosensors have been extensively utilized for the molecular detection of opioids. The usage of novel nanomaterials in biosensing has impressed biosensing studies. Nanomaterials with a large surface area have been used to develop nanobiosensors with shorter reaction times and higher sensitivity than conventional biosensors. Colorimetric and fluorescence sensing methods are two kinds of optical sensor systems based on nanomaterials. Noble metal nanoparticles (NPs), such as silver and gold, are the most frequently applied nanomaterials in colorimetric techniques, owing to their unique optical feature of surface plasmon resonance. Despite the progress of an extensive spectrum of nanobiosensors over the last two decades, the future purpose of low-cost, high-throughput, multiplexed clinical diagnostic lab-on-a-chip instruments has yet to be fulfilled. In this review, a concise overview of opioids (such as tramadol and buprenorphine, oxycodone and fentanyl, methadone and morphine) is provided as well as information on their classification, mechanism of action, routine tests, and new opioid sensing technologies based on various NPs. In order to highlight the trend of nanostructure development in biosensor applications for opioids, recent literature examples with the nanomaterial type, target molecules, and limits of detection are discussed.

Nanoarchitectonics for Abused-Drug Biosensors

Rapid, accessible, and highly accurate biosensors for the detection of addictive and abused drugs are needed to reduce the adverse personal and societal impacts of addiction. Modern sensors that utilize next-generation technologies, e.g., nanobiotechnology and nanoarchitectonics, have triggered revolutionary progress in the field as they allow accurate detection and tracking of trace levels of major classes of drugs. This paper reviews advances in the field of biosensors for the detection of commonly abused drugs, both prescribed such as codeine and morphine, and illegal narcotics like cocaine.

Capacitive Aptasensor Coupled with Microfluidic Enrichment for Real-Time Detection of Trace SARS-CoV-2 Nucleocapsid Protein

The pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has lasted for almost 2 years. Stemming its spread has posed severe challenges for clinical virus detection. A long turnaround time, complicated operation, and low accuracy have become bottlenecks in developing detection techniques. Adopting a direct antigen detection strategy, we developed a fast-responding and quantitative capacitive aptasensor for ultratrace nucleocapsid protein detection based on a low-cost microelectrode array (MEA) chip. Employing the solid-liquid interface capacitance with a sensitivity of picofarad level, the tiny change on the MEA surface can be definitively detected. As a result, the limit of detection reaches an ultralow level of femtogram per milliliter in different matrices. Integrated with efficient microfluidic enrichment, the response time of this sensor from the sample to the result is shortened to 15 s, completely meeting the real-time detection demand. Moreover, the wide linear range of the sensor is from 10-5 to 10-2 ng/mL, and a high selectivity of 6369:1 is achieved. After application and evaluation in different environmental and body fluid matrices, this sensor and the detection method have proved to be a label-free, real-time, easy-to-operate, and specific strategy for SARS-CoV-2 screening and diagnosis.

Optimization of ACEK-enhanced, PCB-based biosensor for highly sensitive and rapid detection of bisphenol a in low resource settings

In this study, we developed a low-cost and easy-to-use capacitive biosensor employing printed-circuit-board (PCB)-based technique for electrode fabrication and a specific alternative current (AC) signal for AC Electrokinetics (ACEK) effect excitation. Fast, accurate, and highly sensitive detection and quantification of bisphenol A (BPA) was achieved. An easy characterization of the biofunctionalization process is introduced by measuring interfacial capacitance which is simple and superior to most of methods currently in use. The frequency and amplitude of the AC signal used for capacitive interrogation were optimized to achieve maximum interfacial capacitance and maximum sensitivity. To evaluate the performance of the developed biosensor, its operation was compared with in-house microfabricated and commercially available electrodes. The limit-of-detection (LOD) obtained using the PCB-based electrodes was found to be at least one order of magnitude lower than that obtained with the commercial and in-house microfabricated electrodes. The linear range for BPA detection was wide from 1 fM to 10 pM with an LOD of 109.5 aM and sample to result in 20s. The biosensor operation was validated by spike-and-recovery tests of BPA using commercial food samples. Thus, the platform has a potential as an on-site detection of bisphenol A in low-resource settings.

A disposable aptasensor based on a gold-plated coplanar electrode array for on-site and real-time determination of Cu2

Copper ion (Cu²⁺) is an important cofactor for many enzymes in human body. Either excessive or deficient Cu²⁺ in the body may cause serious dysfunctions and diseases. So sensitive determination of Cu²⁺ in environmental samples is of more significance for evaluation and control of Cu²⁺ intake. Based on a low-cost gold-plated coplanar electrode array, a disposable aptasensor is developed with an ultra-sensitive indicator of interfacial capacitance. Modified with a specially isolated DNA aptamer for Cu²⁺, this sensor achieves a high selectivity of 1207: 1 against non-target ions. To realize real-time response, alternating-current electrothermal effect is integrated into the capacitance measuring process to efficiently enrich the trace Cu²⁺. This sensor reaches a limit of detection of 2.97 fM, with a linear range from 5.0 fM to 50 pM. The response time is only 15 s, which can meet the real-time detection requirement. On-site test of practical samples is also realized using the disposable sensor combined with a handheld inductance/capacitance/resistance meter. This sensor with its portable test system provides a cost-efficient solution for on-site, real-time and sensitive detection of Cu²⁺, showing great application value in environment monitoring.

Interactions of the Cocaine and Quinine Aptamer with Gold Nanoparticles under the Dilute Biosensor and Concentrated NMR Conditions

The cocaine aptamer was later found to bind quinine with an even higher affinity. In this work, we used a fluorescently labeled aptamer named MN4 to study its adsorption by gold nanoparticles (AuNPs), and the subsequent displacement by the nonlabeled aptamer and by quinine. Without washing, 14% of the preadsorbed MN4 strands were displaced by 4000-fold excess of free MN4, whereas no displacement was observed after washing, suggesting that washing removed weakly adsorbed aptamers. In a previous paper, rapid exchange was observed with NMR by directly mixing AuNPs and concentrated MN4, and our work has unified the dilute and concentrated aptamer conditions. The difference is attributable to the conformation of the adsorbed aptamer, where dilute aptamers are adsorbed in a collapsed state with a much higher affinity to AuNPs. In addition, the preadsorbed MN4 aptamer cannot be desorbed by adding quinine, indicating that direct desorption-based fluorescent sensors cannot be made. Finally, based on the similar color responses to both the aptamer and its nonbinding mutants, the label-free colorimetric detection method cannot be directly applied for the detection of quinine. This work indicated that different experimental conditions need to be carefully compared to have a unified understanding of aptamer/AuNP systems.

Enhancing affinity-based electroanalytical biosensors by integrated AC electrokinetic enrichment-A mini review

Biosensors play a central role in moving diagnostics to being on-site or decentralized. Affinity biosensor, an important category of biosensors, has important applications in clinical diagnosis, pharmaceuticals, immunology, and other fields. Affinity biosensors rely on specific binding between target analytes and biological ligands such as antibodies, nucleic acids, or other receptors to generate measurable signals. Oftentimes the target analytes in practical samples are of low abundance in a complex matrix. Traditional affinity biosensors mainly rely on random diffusion of analytes in solution to conjugate with biorecognition elements on the sensor surface of electrodes. The process may take hours or even days, which is not conducive to rapid and sensitive detection of biosensors. Therefore, it is strongly desired to incorporate an enrichment mechanism for target analytes into biosensor-based detection. AC electrokinetic (ACEK) effect can realize rapid enrichment of analytes by application of AC electric fields, which holds great promise for achieving high sensitivity, low detection limit, and rapid turnaround. This article reviews the studies of affinity biosensors integrated with ACEK enrichment in the past decade, and summarizes the latest detection methods, detection devices and applications, hoping to provide some insights and references for researchers in related fields.

A Sensitive and Specific Genomic RNA Sensor for Point-of-Care Screening of Zika Virus from Serum

This work presents a sensitive and specific single-step RNA sensor for Zika virus (ZIKV) in serum. Using AC electrokinetics (ACEK)-enhanced capacitive sensing technology, ZIKV genomic RNA (gRNA) can be directly detected from serum. The sensors are interdigitated electrodes modified with oligonucleotide probes complementary to the conserved regions of ZIKV gRNA. The ACEK capacitive sensing applies an optimized AC excitation signal over the sensor, which induces ACEK microfluidic enrichment of analytes and also simultaneously performs real-time monitoring of hybridization of ZIKV gRNA on the sensor surface. Hence, the sensing procedures are simple with rapid turn-around time and good specificity and sensitivity. A series of experiments are conducted to optimize the sensor performance. The performance of the sensor is investigated for three different probes, two functionalization buffers, and different hybridization buffers. With the optimized sensing protocol, this method can detect spiked ZIKV gRNA from human serum within 30 s and reach a limit of detection of 78.8 copies/μL in analytical samples and as low as 287.5 copies/μL in neat serum. The sensors can successfully differentiate between the RNAs of the ZIKV and dengue virus, two viruses with similar transmission paths and symptoms. The sensor is simple to use and requires no labeling or sophisticated process typically involved in a polymerase chain reaction, hybridization chain reaction, or nucleic acid sequence-based amplification.

Rapid and Sensitive Detection of miRNA Based on AC Electrokinetic Capacitive Sensing for Point-of-Care Applications

A sensitive and efficient method for microRNAs (miRNAs) detection is strongly desired by clinicians and, in recent years, the search for such a method has drawn much attention. There has been significant interest in using miRNA as biomarkers for multiple diseases and conditions in clinical diagnostics. Presently, most miRNA detection methods suffer from drawbacks, e.g., low sensitivity, long assay time, expensive equipment, trained personnel, or unsuitability for point-of-care. New methodologies are needed to overcome these limitations to allow rapid, sensitive, low-cost, easy-to-use, and portable methods for miRNA detection at the point of care. In this work, to overcome these shortcomings, we integrated capacitive sensing and alternating current electrokinetic effects to detect specific miRNA-16b molecules, as a model, with the limit of detection reaching 1.0 femto molar (fM) levels. The specificity of the sensor was verified by testing miRNA-25, which has the same length as miRNA-16b. The sensor we developed demonstrated significant improvements in sensitivity, response time and cost over other miRNA detection methods, and has application potential at point-of-care.

Real-time, selective, and low-cost detection of trace level SARS-CoV-2 spike-protein for cold-chain food quarantine

Due to the friendly temperature for virus survival, SARS-CoV-2 is frequently found in cold-chain foods, posing a serious threat to public health. Utilizing an interdigitated microelectrode chip modified with an antibody probe and integrating dielectrophoresis enrichment with interfacial capacitance sensing, a strategy is presented for the detection of trace level spike-protein from SARS-CoV-2. It achieves a limit of detection as low as 2.29 × 10^-6 ng/mL in 20 s, with a wide linear range of 10^-5-10^-1 ng/mL and a selectivity of 234:1. The cost for a single test can be controlled to ~1 dollar. This strategy provides a competitive solution for real-time, sensitive, selective, and large-scale application in cold-chain food quarantine.

Rapid and Sensitive Point of Care Detection of MRSA Genomic DNA by Nanoelectrokinetic Sensors

Biosensors have shown great potential in realizing rapid, low cost, and portable on-site detection for diseases. This work reports the development of a new bioelectronic sensor called AC electrokinetics-based capacitive (ABC) biosensor, for the detection of genomic DNA (gDNA) of methicillin-resistant Staphylococcus aureus (MRSA). The ABC sensor is based on interdigitated microelectrodes biofunctionalized with oligonucleotide probes. It uses a special AC signal for direct capacitive monitoring of topological change on nanostructured sensor surface, which simultaneously induces dielectrophoretic enrichment of target gDNAs. As a result, rapid and specific detection of gDNA/probe hybridization can be realized with high sensitivity. It requires no signal amplification such as labeling, hybridization chain reaction, or nucleic acid sequence-based amplification. This method involves only simple sample preparation. After optimization of nanostructured sensor surface and signal processing, the ABC sensor demonstrated fast turnaround of results (~10 s detection), excellent sensitivity (a detection limit of 4.7 DNA copies/µL MRSA gDNA), and high specificity, suitable for point of care diagnosis. As a bioelectronic sensor, the developed ABC sensors can be easily adapted for detections of other infectious agents.

Recent developments in electrochemical detection of illicit drugs in diverse matrices

Drug abuse is a global problem, requiring an interdisciplinary approach. Discovery, production, trafficking, and consumption of illicit drugs have been constantly growing, leading to heavy consequences for environment, human health, and society in general. Therefore, an urgent need for rapid, sensitive, portable and easy-to-operate detection methods for numerous drugs of interest in diverse matrices, from police samples, biological fluids and hair to sewage water has risen. Electrochemical sensors are promising alternatives to chromatography and spectrometry. Last decades, electrochemical sensing of illegal drugs has experienced a very significant growth, driven by improved transducers and signal amplifiers helping to improve the sensitivity and selectivity. The present review summarizes recent advances (last 10 years) in electrochemical detection of the most prevailing illicit drugs (such as cocaine, heroin, and (meth)amphetamine), their precursors and derivatives in different matrices. Various electrochemical sensors making use of different transducers with their (dis)advantages were discussed, and their sensitivity and applicability were critically compared. In those cases where natural or synthetic recognition elements were included in the sensing system to increase specificity, selected recognition elements, their immobilization, working conditions, and analytical performance were discussed. Finally, an outlook is presented with suggestions and recommendations for future developments.

Nanomaterial-based aptamer sensors for analysis of illicit drugs and evaluation of drugs consumption for wastewater-based epidemiology

The abuse of illicit drugs usually associated with dramatic crimes may cause significant problems for the whole society. Wastewater-based epidemiology (WBE) has been demonstrated to be a novel and cost-effective way to evaluate the abuse of illicit drugs at the community level, and has been used as a routine method for monitoring and played a significant role for combating the crimes in some countries, e.g. China. The method can also provide temporal and spatial variation of drugs of abuse. The detection methods mainly remain on the conventional liquid chromatography coupled with mass spectrometry, which is extremely sensitive and selective, however needs advanced facility and well-trained personals, thus limit it in the lab. As an alternative, sensors have emerged to be a powerful analytical tool for a wide spectrum of analytes, in particular aptamer sensors (aptasensors) have attracted increasing attention and could act as an efficient tool in this field due to the excellent characteristics of selectivity, sensitivity, low cost, miniaturization, easy-to-use, and automation. In this review, we will briefly introduce the context, specific assessment process and applications of WBE and the recent progress of illicit drug aptasensors, in particular focusing on optical and electrochemical sensors. We then highlight several recent aptasensors for illicit drugs in new technology integration and discuss the feasibility of these aptasensor for WBE. We will summarize the challenges and propose our insights and opportunity on aptasensor for WBE to evaluate community-wide drug use trends and public health.

Direct Detection of Low-Molecular-Weight Compounds in 2D and 3D Aptasensors by Biolayer Interferometry

The direct biolayer interferometry (BLI) measurement of low-molecular-weight (LMW) analytes (<200 Da) still represents a challenge, in particular, when low receptor densities are used. BLI is a powerful optical technique for the label-free, real-time characterization and quantification of biomolecular interactions at interfaces. We demonstrate herein that the quantification of biomolecular recognition is possible by BLI using either 2D-like or 3D platforms for aptamer ligand immobilization. The influence of the aptamer density on the interaction was evaluated and compared for the two sensor architectures. Despite the LMW of the analyte, BLI monitoring led to signals that are exploitable for affinity and kinetic studies, even at low aptamer density. We demonstrate that the immobilization format as well as the aptamer density has a crucial influence on the determination of the recognition parameters.

Aptasensors for Point-of-Care Detection of Small Molecules

Aptamers, a group of nucleic acids which can specifically bind to a target molecule, have drawn extensive interest over the past few decades. For analytics, aptamers represent a viable alternative to gold-standard antibodies due to their oligonucleic nature combined with advantageous properties, including higher stability in harsh environments and longer shelf-life. Indeed, over the last decade, aptamers have been used in numerous bioanalytical assays and in various point-of-care testing (POCT) platforms. The latter allows for rapid on-site testing and can be performed outside a laboratory by unskilled labor. Aptamer technology for POCT is not limited just to medical diagnostics; it can be used for a range of applications, including environmental monitoring and quality control. In this review, we critically examine the use of aptamers in POCT with an emphasis on their advantages and limitations. We also examine the recent success of aptasensor technology and how these findings pave the way for the analysis of small molecules in POCT and other health-related applications. Finally, the current major limitations of aptamers are discussed, and possible approaches for overcoming these challenges are presented.

A review: Recent advances in ultrasensitive and highly specific recognition aptasensors with various detection strategies

One of the most studied topics in analytical chemistry and physics is to develop bio-sensors. Aptamers are small single-stranded RNA or DNA oligonucleotides (5-25 kDa), which have advantages in comparison to their antibodies such as physicochemical stability and high binding specificity. They are able to integrate with proteins or small molecules, including intact viral particles, plant lectins, gene-regulation factor, growth factors, antibodies and enzymes. The aptamers have reportedly shown some unique characteristics, including long shelf-life, simple modification to provide covalent bonds to material surfaces, minor batch variation, cost-effectiveness and slight denaturation susceptibility. These features led important efforts toward the development of aptamer-based sensors, known as apta-sensors classified into optical, electrical and mass-sensitive based on the signal transduction mode. This review provided a number of current advancements in selecting, development criteria, and aptamers application with the focus on the effect of apta-sensors, specifically for disease-associated analyses. The review concentrated on the current reports of apta-sensors that are used for evaluating different food and environmental pollutants.

Molecularly Imprinted Nanoparticles Based Sensor for Cocaine Detection

The development of a sensor based on molecularly imprinted polymer nanoparticles (nanoMIPs) and electrochemical impedance spectroscopy (EIS) for the detection of trace levels of cocaine is described in this paper. NanoMIPs for cocaine detection, synthesized using a solid phase, were applied as the sensing element. The nanoMIPs were first characterized by Transmission Electron Microscopy (TEM) and Dynamic Light Scattering and found to be ~148.35 ± 24.69 nm in size, using TEM. The nanoMIPs were then covalently attached to gold screen-printed electrodes and a cocaine direct binding assay was developed and optimized, using EIS as the sensing principle. EIS was recorded at a potential of 0.12 V over the frequency range from 0.1 Hz to 50 kHz, with a modulation voltage of 10 mV. The nanoMIPs sensor was able to detect cocaine in a linear range between 100 pg mL-1 and 50 ng mL-1 (R2 = 0.984; p-value = 0.00001) and with a limit of detection of 0.24 ng mL-1 (0.70 nM). The sensor showed no cross-reactivity toward morphine and a negligible response toward levamisole after optimizing the sensor surface blocking and assay conditions. The developed sensor has the potential to offer a highly sensitive, portable and cost-effective method for cocaine detection.

Serologic Diagnosis of Taenia Solium Cysticercosis through Linear Unmixing Analysis of Biosignals from ACEK Capacitive Sensing Method

Cysticercosis is a parasitic infection caused by adult tapeworms, and it constantly plagues the livelihoods of people from subsistence farming communities in developing countries. Diagnosis of Cysticercosis typically requires both central nervous system imaging and serological testing. The most common methods in serological testing are Enzyme-linked Immunosorbent Assay (ELISA) and Enzyme Immuno-electrotransfer Blot (EITB). Both ELISA and EITB methods are excessively time-consuming and labor-intensive. Recent research indicates that a shorter assay time and/or higher sensitivity can be achieved by integrating alternate current electrokinetics (ACEK) with biosensing. However, the raw time-series data is very noisy and the size of the dataset is extremely small, which would bring two potential challenges. On one hand, traditional statistical methods cannot extract features robust enough for high sensitivity as well as high specificity. On the other hand, the small data size limits the usage of automatic feature extractors such as deep neural networks. In this paper, we propose a linear unmixing based approach by exploiting the possibility that the time-series biological signals can be represented as linear combinations of source signals. This paper makes distinctive contributions to the field of bio-signal by introducing the unmixing model from the image processing domain to the time-series domain. Experimental results on the classification of Cysticercosis using 123 samples demonstrate the robustness and superior performance of the linear unmixing method over other conventional classifiers in handling small datasets.

An interdigitated microelectrode based aptasensor for real-time and ultratrace detection of four organophosphorus pesticides

With increasing industrialization of food production, residues of organophosphorus pesticides (OPs) are more frequently found in the environment including rivers, lakes and soils. Extended exposure to OPs, even at a level below 1 nM, may lead to liver and central nervous system damages in humans and animals, while existing detection methods are not sensitive enough to detect OPs at trace levels. We presented a simple-to-use aptasensor to rapidly detect broad-spectrum OPs with high sensitivity. DNA aptamer was modified on the surface of a micro interdigitated electrode chip, and AC electrokinetics was employed to accelerate the binding of OP molecules to the aptamer probe. The sensing strategy directly measured the interfacial capacitance whose change rate was adopted as a quantitative indicator of recognition events, with a sample to result detection time of 30 s. This aptasensor had a wide linear range of (fM ~ nM), and the detection limit reached (0.24-1.67) fM for four highly-toxic OPs, with good specificity. It still showed good activity after being stored in non-refrigerated environment for at least 14 days. This aptasensor as well as the detection method offer a promising solution for on-site and real-time sensitive OP detection.

Simple, Fast And Highly Sensitive Detection Of Gram-Negative Bacteria By A Novel Electrical Biosensor

This work presents a rapid, low-cost, highly sensitive and specific capacitive sensor for detection of Gram negative bacteria in a field setting. Recognition of Gramnegative bacteria is based on specific detection of lipopolysaccharides (LPS) by LPS-specific aptamer probe immobilized on electrode sensors. An inhomogeneous AC electric field is applied on sensor electrodes and induces positive dielectrophoresis that attracts LPS particles to the sensor electrodes for rapid detection. The same AC signal is also used to detect the binding reactions occurred on the sensor surface. The AC signal was optimized, and the binding between LPS and the specific aptamer was demonstrated. The detection limit reaches as low as 4.9 fg/mL for free LPS molecules and 53 #/mL of bacteria within a 30s' response time, meeting the needs of onsite bacteria detection.

Band Electrodes in Sensing Applications: Response Characteristics and Band Fabrication Methods

This Review surveys the fabrication methods reported for both single microband electrodes and microband electrode arrays and their uses in sensing applications. A theoretical section on band electrodes provides background information on the structure of band electrodes, their diffusional profiles, and the types of voltammetric behavior observed. A short section summarizes the currently available commercial microband electrodes. A section describing recent (10 years) sensing applications using band electrode is also presented.

Electrochemical sensing of cocaine in real samples based on electrodeposited biomimetic affinity ligands

A selective electrochemical sensor for direct detection of cocaine was developed based on molecularly imprinted polymers electropolymerized onto graphene-modified electrodes. Palladium nanoparticles were integrated in the sensing layer for the benefit of enhancing the communication between the imprinted sites and the electrode and improving their homogeneous distribution. The molecularly imprinted polymer was synthesized by cyclic voltammetry using p-aminobenzoic acid as a high affinity monomer selected by computational modeling, and cocaine as a template molecule. Experimental parameters related to the electrochemical deposition of palladium nanoparticles, pH, composition of the electropolymerization mixture, extraction and rebinding conditions were studied and optimized. Under optimized conditions, the oxidation peak current varied linearly with cocaine concentration in the range of 100-500 μM, with a detection limit of 50 μM (RSD 0.71%, n = 3). The molecularly imprinted sensor was able to detect cocaine in saliva and river water with good recoveries after sample pretreatment and was successfully applied for screening real street samples for cocaine.

Rapid detection of trace Cu2+ using an l-cysteine based interdigitated electrode sensor integrated with AC electrokinetic enrichment

Copper is an indispensable trace element for human health. Too much or too little intake of copper ion (Cu²⁺ ) can lead to its own adverse health conditions. Therefore, detection of Cu²⁺ is always of vital importance. In this work, a simple sensor was developed for rapid detection of trace Cu²⁺ in water, in which L-cysteine (Cys) as a molecular probe was self-assembled on a gold interdigital electrode to form a monolayer for specific capture of Cu²⁺ . The interfacial capacitance of interdigital electrode was detected to indicate the target adsorption level under an AC signal working as the excitation to induce directed movement and enrichment of Cu²⁺ to the electrode surface. This sensor reached a limit of detection of 4.14 fM and a satisfactory selectivity against eight other ions (Zn²⁺ , Hg²⁺ , Pb²⁺ , Cd²⁺ , Mg²⁺ , Fe²⁺ , As³⁺ , and As⁵⁺ ). Testing of spiked tap water was also performed, demonstrating the sensor's usability. This sensor as well as the detection method shows a great application potential in fields such as environmental monitoring and medical diagnosis.

A nanoporous gold-based electrochemical aptasensor for sensitive detection of cocaine

The increasing application of aptamers in bioassays has triggered a lot of research interest for development of highly sensitive and selective sensing platforms. Herein, we report on the design of a sensitive cocaine biosensor by immobilizing the 5′-disulfide-functionalized end of an aptamer sequence on a nanoporous gold (NPG) electrode followed by the conjugation of its 3′-amino-functionalized end to 2,5-dihydroxybenzoic acid (DHBA) as the redox probe. In the presence of cocaine, the aptamer undergoes a conformational change from an open unfolded state to a closed conformation, which reduces the distance between DHBA and the electrode surface, resulting in the enhanced electron-transfer efficiency. Using square wave voltammetric method and under the optimal conditions, the cocaine aptasensor presented two linear responses in the concentration ranges between 0.05–1 and 1–35 μM, with an excellent detection limit of 21 nM. The proposed aptasensor provides a simple and low-cost method for cocaine detection with good reproducibility and accuracy. Furthermore, it could be regarded as a general model to investigate the unique function of aptamer-functionalized nanostructured electrodes to stablish highly advanced electrochemical biosensors for various target analytes of diagnostic importance.

The increasing application of aptamers in bioassays has triggered a lot of research interest for development of highly sensitive and selective sensing platforms.

Rapid, highly sensitive detection of Gram-negative bacteria with lipopolysaccharide based disposable aptasensor

Gram-negative bacteria are one of the most common microorganisms in the environment. Their differential detection and recognition from Gram-positive bacteria has been attracting much attention over the years. Using Escherichia coli (E. coli) as a model, we demonstrated on-site detection of Gram-negative bacteria by an AC electrokinetics-based capacitive sensing method using commercial microelectrodes functionalized with an aptamer specific to lipopolysaccharides. Dielectrophoresis effect was utilized to enrich viable bacteria to the microelectrodes rapidly, achieving a detection limit of 10² cells/mL within a 30 s' response time. The sensor showed a negligible response to Staphylococcus aureus (S. aureus), a Gram-positive species. The developed sensor showed significant advantages in sensitivity, selectivity, cost, operation simplicity, and response time. Therefore, this sensing method has shown great application potential for environmental monitoring, food safety, and real-time diagnosis.