Highly stable and regenerative graphene–diamond hybrid electrochemical biosensor for fouling target dopamine detection

Magnetic MOF composites for the electrocatalysis and biosensing of dopamine released from living cells

Metal-organic frameworks (MOFs) with fit ligands and metals can be integrated into electrochemical biosensors for the detection of various biomolecules. In this study, we have synthesized novel magnetic MOF composites as electrocatalysts and constructed a novel biosensor for electrochemical detection of dopamine. The composites named Fe3O4@ZIF-8@AuNPs-COOH are synthesized through layer-by-layer assembly. They exhibit excellent stability and cooperative catalytic activity. In addition, green recycling is readily achieved through magnetizing/demagnetizing the electrode. The large specific surface area and ordered porous structures of the magnetic MOFs ensure good dispersion of gold nanoparticles, while the carboxyl group efficiently shields other redox-active interfering substances. The proposed electrochemical biosensor accomplishes the sensitive detection of dopamine in human serums and living cells. This study broadens the application of MOFs in electrochemical biosensing, validates the feasibility of biosensors for in vivo analysis, and provides new insights into green sensing.

Alkaline liquid-derived NaxTi11.5MoVOx/C-40 material with controlled electron transfer rate for sensitive electrochemical detection of dopamine

The neurotransmitter dopamine (DA) is associated with many physiological and pathological processes, so the importance of low detection limits and high sensitivity analysis cannot be overstated, especially for early disease detection. Here, 2 M NaOH aqueous solution is used to precipitate metal ions in an ethanol solution containing carbon black (CB), and then nanocomposite catalysts (NaxTi11.5MoVOx/C-40 (40 denoted as 40 mg CB)) were obtained by calcining the precipitation. When used for DA detection, NaxVOx acts as the main active site for electrochemical oxidation of DA and NaxTi11.5MoOx plays a role in facilitating the binding of DA to the active site and stabilizing the active site. The NaxTi11.5MoVOx/C-40 electrochemical biosensor has a limit of detection (LOD) of 0.003 μM with a linear range of 0.005-51.665 μM for DA. This sensor can be used to sensitively identify the concentration of DA in human blood and urine. Catalysts containing varying amounts of CB exhibit diverse electron transfer rates, and surprisingly, we found that the appropriate electron transfer rate is optimal for the detection of low concentrations of DA. Because the performance of the electrochemical biosensors is affected by both the activity of the catalysts and the accuracy of the electrochemical testing instrumentation. To better explain this phenomenon, we propose the concept of resolution (Rn) and present the formula to derive it, offering a new approach to evaluating the performance of electrochemical biosensors.

Preparation of Molecularly Imprinted Cysteine Modified Zinc Sulfide Quantum Dots Based Sensor for Rapid Detection of Dopamine Hydrochloride

By combining surface molecular imprinting technology with cysteine-modified ZnS quantum dots, an elegant, molecularly imprinted cysteine-modified Mn²⁺: ZnS QDs (MIP@ZnS QDs) based fluorescence sensor was successfully developed. The constructed fluorescence sensor is based on a molecularly imprinted polymer (MIP) coated on the surface cysteine-modified ZnS quantum dots and used for rapid fluorescence detection of dopamine hydrochloride. The MIP@ZnS quantum dots possess the advantages of rapid response, high sensitivity, and selectivity for the detection of dopamine hydrochloride molecules. Experimental results show that the adsorption equilibrium time of MIP@ZnS QDs for dopamine hydrochloride molecules is 12 min, and it can selectively capture and bind dopamine in the sample with an imprinting factor of 29.5. The fluorescence quenching of MIP@ZnS QDs has a good linear (R² = 0.9936) with the concentration of dopamine hydrochloride ranged from 0.01 to 1.0 μM, and the limit of detection is 3.6 nM. In addition, The MIP@ZnS QDs demonstrate good recyclability and stability and are successfully employed for detection of dopamine hydrochloride in urine samples with recoveries was 95.2% to 103.8%. The proposed MIP@ZnS QDs based fluorescent sensor provides a promising approach for food safety detection and drug analysis.

Highly Sensitive and Selective Dopamine Determination in Real Samples Using Au Nanoparticles Decorated Marimo-like Graphene Microbead-Based Electrochemical Sensors

A sensitive and selective electrochemical dopamine (DA) sensor has been developed using gold nanoparticles decorated marimo-like graphene (Au NP/MG) as a modifier of the glassy carbon electrode (GCE). Marimo-like graphene (MG) was prepared by partial exfoliation on the mesocarbon microbeads (MCMB) through molten KOH intercalation. Characterization via transmission electron microscopy confirmed that the surface of MG is composed of multi-layer graphene nanowalls. The graphene nanowalls structure of MG provided abundant surface area and electroactive sites. Electrochemical properties of Au NP/MG/GCE electrode were investigated by cyclic voltammetry and differential pulse voltammetry techniques. The electrode exhibited high electrochemical activity towards DA oxidation. The oxidation peak current increased linearly in proportion to the DA concentration in a range from 0.02 to 10 μM with a detection limit of 0.016 μM. The detection selectivity was carried out with the presence of 20 μM uric acid in goat serum real samples. This study demonstrated a promising method to fabricate DA sensor-based on MCMB derivatives as electrochemical modifiers.

Lignosulfonate in situ-modified reduced graphene oxide biosensors for the electrochemical detection of dopamine

Lignosulfonate (LS), a biomass by-product from sulfite pulping and the paper-making industry, which has many excellent characteristics, such as renewable, environmentally friendly, amphiphilic nature, and especially the abundant content of hydrophilic functional groups in its architecture, making it highly reactive and can be used as a sensitive material in sensors to show changes in electrical signals. Herein, we report a one-step in situ method to fabricate lignosulfonate-modified reduced graphene oxide (LS-rGO) green biosensors, which can be used for the sensitive electrochemical detection of dopamine without interference from uric acid and ascorbic acid. The modified LS molecular layers act as chemical-sensing layers, while the rGO planar sheets function as electric-transmitting layers in the as-assembled dopamine biosensors. After the in situ-decoration of the LS modifier, the sensing performance of LS-rGO for the detection of dopamine was much higher than that of the pure rGO electrode, and the highest current response of the biosensor toward dopamine greatly improved from 11.2 μA to 52.07 μA. The electrochemical sensitivity of the modified biosensor was optimized to be 0.43 μA μM-1, and the detection limit was as low as 0.035 μM with a wide linear range (0.12-100 μM), which is better than that of most previously reported metal- and organic-based modified graphene electrodes. The newly designed biosensor has unique advantages including rapid, stable, sensitive and selective detection of dopamine without interference, providing a facile pathway for the synthesis of green resource-derived sensing materials instead of the traditional toxic and expensive modifiers.

Optimization of electrochemical activation of persulfate by BDD electrodes for rapid removal of sulfamethazine

Boron-doped diamond electrodes have been employed for the removal of sulfamethazine (SMZ) from water by electrochemical activation of persulfate (EO/BDD-PS). A set of experiments with a central composite design (CCD) was conducted to optimize the operating parameters such as persulfate dose, solution pH, and current density by response surface methodology (RSM). The experimental results indicated a rapid degradation of SMZ even at high initial concentrations. For instance, complete degradation of 50 mg L^-1 of SMZ was attained after 15 min at the optimum operating conditions (persulfate loading = 0.40 g L^-1, pH = 4, and current density = 21 mA cm^-2). The oxidation mechanism of EO/BDD-PS process was studied based on the reactive oxidant species (ROS) revealing that both (OH) and contributed to the degradation of SMZ in the EO/BDD-PS system. Furthermore, the oxidation pathway has been proposed by the suspect screening and tandem mass spectrometry analysis. The performance of EO/BDD-PS showed faster SMZ degradation than electro-Fenton and anodic oxidation processes using the same BDD electrochemical reactor under the same conditions. Furthermore, we provided a cost estimation study revealing that a full-scale application of the EO/BDD-PS system for the treatment of similar contaminated water costs about $2.23 m^-3.

Determination of dopamine based on a temperature-sensitive PMEO2MA and Au@rGO-MWCNT nanocomposite-modified electrode

First, the nanocomposite Au@rGO-MWCNT was synthesized by a hydrothermal method. Next, a temperature-controlled composite sensing film was prepared by composite modification of poly(2-(2-methoxyethoxy)ethyl methacrylate) (PMEO₂MA) and Au@rGO-MWCNT on a glassy carbon electrode (GCE). This sensor was shown to exhibit good temperature sensitivity and reversibility to dopamine. When the testing temperature is lower than the lower critical solution temperature (LCST) of the polymer, the PMEO₂MA chain is in a stretched state, which increases the distance between the Au@rGO layers and leads to the inability of MWCNTs in one layer to contact another Au@rGO layer and to low conductivity. Therefore, in this state, dopamine cannot detect an electrochemical signal, and it is termed an "off" state. When the temperature is higher than the LCST of the polymer, the PMEO₂MA chain shrinks, allowing the MWCNTs to make contact with another layer of Au@rGO; the electron transfer rate of the modified film increases, and the electrochemical behavior of dopamine turns to an "on" state. Moreover, the sensor has a wide detection range (0.1 to 9.0 μM and 9.0 to 239.0 μM), and the limit of detection of dopamine is as low as 30 nM. This method has been successfully applied to the determination of dopamine in human serum samples. The on-off sensor provides a new avenue for the application of temperature-sensitive polymers.

Mixed sp2-sp3 Nanocarbon Materials: A Status Quo Review

Carbon nanomaterials with a different character of the chemical bond-graphene (sp2) and nanodiamond (sp3)-are the building bricks for a new class of all-carbon hybrid nanomaterials, where the two different carbon networks with sp3 and sp2 hybridization coexist, interacting and even transforming into one another. The extraordinary physiochemical properties defined by the unique electronic band structure of the two border nanoallotropes ensure the immense application potential and versatility of these all-carbon nanomaterials. The review summarizes the status quo of sp2 - sp3 nanomaterials, including graphene/graphene-oxide-nanodiamond composites and hybrids, graphene/graphene-oxide-diamond heterojunctions, and other sp2-sp3 nanocarbon hybrids for sensing, electronic, and other emergent applications. Novel sp2-sp3 transitional nanocarbon phases and architectures are also discussed. Furthermore, the two-way sp2 (graphene) to sp3 (diamond surface and nanodiamond) transformations at the nanoscale, essential for innovative fabrication, and stability and chemical reactivity assessment are discussed based on extensive theoretical, computational and experimental studies.

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.

Perylene diimide/MXene-modified graphitic pencil electrode-based electrochemical sensor for dopamine detection

The synthesis of novel architecture comprising perylene diimide (PDI)-MXene (Ti₃C₂T_X)-integrated graphitic pencil electrode for electrochemical detection of dopamine (DA) is reported. The good electron passage between PDI-MXene resulted in an unprecedented nano-adduct bearing enhanced electrocatalytic activity with low-energy electronic transitions. The anionic groups of PDI corroborated enhanced active surface area for selective binding and robust oxidation of DA, thereby decreasing the applied potential. Meanwhile, the MXene layers acted as functional conducive support for PDI absorption via strong H-bonding. The considerable conductivity of MXene enhanced electron transportation thus increasing the sensitivity of sensing interface. The inclusively engineered nano-adduct resulted in robust DA oxidation with ultra-sensitivity (38.1 μAμM^-1cm^-2), and low detection limit (240 nM) at very low oxidation potential (-0.135 V). Moreover, it selectively signaled DA in the presence of physiological interferents with wide linearity (100-1000 μM). The developed transducing interface performed well in human serum samples with RSD (0.1 to 0.4%) and recovery (98.6 to 100.2%) corroborating the viability of the practical implementation of this integrated system. Graphical abstract Schematic illustration of the oxidative process involved on constructed sensing interface for the development of a non-enzymatic dopamine sensor.

A Nanometer-Sized Graphite/Boron-Doped Diamond Electrochemical Sensor for Sensitive Detection of Acetaminophen

A boron-doped diamond (BDD) has been widely used as an outstanding electrode for constructing high-performance electrochemical biosensors. In this paper, we fabricated a novel electrode combined of nanometer-sized graphite-BDD film (NG-BDD) by chemical vapor deposition. The nanometer-sized graphite (NG) is formed on the (111) facet of BDD via converting an sp³ diamond structure to an sp² graphitic phase at high temperature in boron-rich ambient. The electrode was characterized by means of scanning electron microscopy, Raman spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. This NG-BDD was performed as an electrode of electrochemical biosensor to detect trace acetaminophen (APAP) accurately. Cyclic voltammetry and differential normal pulse voltammetry are used to investigate the overall performance of the electrochemical device. The sensor has a linear electrochemical response to APAP in the concentration range of 0.02-50 μM, and the detection limit is estimated to be as low as 5 nM. The research has resulted in a solution of constructing a reusable NG-BDD sensor to detect APAP with stability and show potential in extensive application.

Biosensors for wastewater-based epidemiology for monitoring public health

Public health is attracting increasing attention due to the current global pandemic, and wastewater-based epidemiology (WBE) has emerged as a powerful tool for monitoring of public health by analysis of a variety of biomarkers (e.g., chemicals and pathogens) in wastewater. Rapid development of WBE requires rapid and on-site analytical tools for monitoring of sewage biomarkers to provide immediate decision and intervention. Biosensors have been demonstrated to be highly sensitive and selective tools for the analysis of sewage biomarkers due to their fast response, ease-to-use, low cost and the potential for field-testing. This paper presents biosensors as effective tools for wastewater analysis of potential biomarkers and monitoring of public health via WBE. In particular, we discuss the use of sewage sensors for rapid detection of a range of targets, including rapid monitoring of community-wide illicit drug consumption and pathogens for early warning of infectious diseases outbreaks. Finally, we provide a perspective on the future use of the biosensor technology for WBE to enable rapid on-site monitoring of sewage, which will provide nearly real-time data for public health assessment and effective intervention.

Current strategies with sensing technologies to eliminate stress cardiomyopathy

Stress cardiomyopathy refers weakening of heart muscle due to the continuous stress. Generally, the severe status of stress cardiomyopathy has been revealed after damaging the muscles and measured by the physical changes in the heart system. To overcome this issue, biosensor can be used, which could eliminate the late identification stress cardiomyopathy. With biosensors, different stress markers such as epinephrine, dopamine, catecholamine, α-amylase, norepinephrine, serotonin and cortisol have been identified by a wide range of developments. These biosensors are available from laboratory to industry at the ranges of nano to macrodevices. To merge with the identification of stress cardiomyopathy, the above strategies might be utilized properly and can aid to reduce the stress-related problems. This overview gleaned the currently available biosensing methods and the associated biomarkers at various stages of the developments and implementations of stress cardiomyopathy.

Intertwined Carbon Nanotubes and Ag Nanowires Constructed by Simple Solution Blending as Sensitive and Stable Chloramphenicol Sensors

Chloramphenicol (CAP) is a harmful compound associated with human hematopathy and neuritis, which was widely used as a broad-spectrum antibacterial agent in agriculture and aquaculture. Therefore, it is significant to detect CAP in aquatic environments. In this work, carbon nanotubes/silver nanowires (CNTs/AgNWs) composite electrodes were fabricated as the CAP sensor. Distinguished from in situ growing or chemical bonding noble metal nanomaterials on carbon, this CNTs/AgNWs composite was formed by simple solution blending. It was demonstrated that CNTs and AgNWs both contributed to the redox reaction of CAP in dynamics, and AgNWs was beneficial in thermodynamics as well. The proposed electrochemical sensor displayed a low detection limit of up to 0.08 μM and broad linear range of 0.1-100 μM for CAP. In addition, the CNTs/AgNWs electrodes exhibited good performance characteristics of repeatability and reproducibility, and proved suitable for CAP analysis in real water samples.

Recent Advances in Electrochemical Sensors for the Detection of Biomolecules and Whole Cells

Electrochemical sensors are considered an auspicious tool to detect biomolecules (e.g., DNA, proteins, and lipids), which are valuable sources for the early diagnosis of diseases and disorders. Advances in electrochemical sensing platforms have enabled the development of a new type of biosensor, enabling label-free, non-destructive detection of viability, function, and the genetic signature of whole cells. Numerous studies have attempted to enhance both the sensitivity and selectivity of electrochemical sensors, which are the most critical parameters for assessing sensor performance. Various nanomaterials, including metal nanoparticles, carbon nanotubes, graphene and its derivatives, and metal oxide nanoparticles, have been used to improve the electrical conductivity and electrocatalytic properties of working electrodes, increasing sensor sensitivity. Further modifications have been implemented to advance sensor platform selectivity and biocompatibility using biomaterials such as antibodies, aptamers, extracellular matrix (ECM) proteins, and peptide composites. This paper summarizes recent electrochemical sensors designed to detect target biomolecules and animal cells (cancer cells and stem cells). We hope that this review will inspire researchers to increase their efforts to accelerate biosensor progress-enabling a prosperous future in regenerative medicine and the biomedical industry.

Metal Nanoparticles for Electrochemical Sensing: Progress and Challenges in the Clinical Transition of Point-of-Care Testing

With the rise in public health awareness, research on point-of-care testing (POCT) has significantly advanced. Electrochemical biosensors (ECBs) are one of the most promising candidates for the future of POCT due to their quick and accurate response, ease of operation, and cost effectiveness. This review focuses on the use of metal nanoparticles (MNPs) for fabricating ECBs that has a potential to be used for POCT. The field has expanded remarkably from its initial enzymatic and immunosensor-based setups. This review provides a concise categorization of the ECBs to allow for a better understanding of the development process. The influence of structural aspects of MNPs in biocompatibility and effective sensor design has been explored. The advances in MNP-based ECBs for the detection of some of the most prominent cancer biomarkers (carcinoembryonic antigen (CEA), cancer antigen 125 (CA125), Herceptin-2 (HER2), etc.) and small biomolecules (glucose, dopamine, hydrogen peroxide, etc.) have been discussed in detail. Additionally, the novel coronavirus (2019-nCoV) ECBs have been briefly discussed. Beyond that, the limitations and challenges that ECBs face in clinical applications are examined and possible pathways for overcoming these limitations are discussed.

Detection of pollutants in water bodies: electrochemical detection or photo-electrochemical detection?

The massive discharge of pollutants including endocrine-disrupting chemicals (EDCs), heavy metals, pharmaceuticals and personal care products (PPCPs) into water bodies is endangering the ecological environment and human health, and needs to be accurately detected. Both electrochemical and photo-electrochemical detection methods have been widely used for the detection of these pollutants, however, which one is better for the detection of different environmental pollutants? In this feature article, different electrochemical and photo-electrochemical detection methods are summarized, including the principles, classification, common catalysts, and applications. By summarizing the advantages and disadvantages of different detection methods, this review provides a guide for other researchers to detect pollutants in water bodies by using electrochemical and photo-electrochemical analysis.

G-quadruplex based biosensor: A potential tool for SARS-CoV-2 detection

G-quadruplex is a non-canonical nucleic acid structure formed by the folding of guanine rich DNA or RNA. The conformation and function of G-quadruplex are determined by a number of factors, including the number and polarity of nucleotide strands, the type of cations and the binding targets. Recent studies led to the discovery of additional advantageous attributes of G-quadruplex with the potential to be used in novel biosensors, such as improved ligand binding and unique folding properties. G-quadruplex based biosensor can detect various substances, such as metal ions, organic macromolecules, proteins and nucleic acids with improved affinity and specificity compared to standard biosensors. The recently developed G-quadruplex based biosensors include electrochemical and optical biosensors. A novel G-quadruplex based biosensors also show better performance and broader applications in the detection of a wide spectrum of pathogens, including SARS-CoV-2, the causative agent of COVID-19 disease. This review highlights the latest developments in the field of G-quadruplex based biosensors, with particular focus on the G-quadruplex sequences and recent applications and the potential of G-quadruplex based biosensors in SARS-CoV-2 detection.

Fluorometric detection of dopamine based on 3-aminophenylboronic acid-functionalized AgInZnS QDs and cells imaging

Herein, cysteine capped AgInZnS QDs (Cys-AIZS QDs) with a large stoke shift and excellent biocompatibility were synthesized by a one-step aqueous method, followed by modified with 3-aminophenylboronic acid (APBA). Dopamine (DA) as an important neurotransmitter in brain can lead to significantly decrease in the fluorescence intensity of 3-aminophenylboronic acid-functionalized Cys-AIZS QDs (APBA-AIZS QDs) in a large concentration range of 1.5-900 μM. Good linearity can be obtained in the range of 15-120 μM, with a limit of detection (LOD) of 0.65 μM. Moreover, Cys-AIZS QDs and APBA-AIZS QDs were applied to living cells imaging, and Cys-AIZS QDs were applied to the co-localization with lysosomes, indicative of the feasibility of intracellular detection.

Single-atom doping of MoS2 with manganese enables ultrasensitive detection of dopamine: Experimental and computational approach

Two-dimensional transition metal dichalcogenides (TMDs) emerged as a promising platform to construct sensitive biosensors. We report an ultrasensitive electrochemical dopamine sensor based on manganese-doped MoS2 synthesized via a scalable two-step approach (with Mn ~2.15 atomic %). Selective dopamine detection is achieved with a detection limit of 50 pM in buffer solution, 5 nM in 10% serum, and 50 nM in artificial sweat. Density functional theory calculations and scanning transmission electron microscopy show that two types of Mn defects are dominant: Mn on top of a Mo atom (MntopMo) and Mn substituting a Mo atom (MnMo). At low dopamine concentrations, physisorption on MnMo dominates. At higher concentrations, dopamine chemisorbs on MntopMo, which is consistent with calculations of the dopamine binding energy (2.91 eV for MntopMo versus 0.65 eV for MnMo). Our results demonstrate that metal-doped layered materials, such as TMDs, constitute an emergent platform to construct ultrasensitive and tunable biosensors.

Stable Electrochemical Determination of Dopamine by a Fluorine-Terminated {001}-Exposed TiO2 Single Crystal Sensor

Photochemical oxidation is able to effectively regenerate the fouled electrode in electrochemical pollutant monitoring, while its regeneration capacity is limited by the surface-bound hydroxyl radical speciation with low activity and mobility, which is attributed to the dissociated water adsorption on hydrophilic metal oxides. In this work, fluorine-terminated {001}-exposed TiO₂ single crystals (F-TiO₂) are rationally designed to construct an Au-based electrochemical sensor (Au/F-TiO₂) for dopamine (DA) detection in different matrices. The Au/F-TiO₂ sensor exhibits an efficient and stable detection capacity in both environmental and biological samples. A superior photochemical regeneration capacity is obtained on the Au/F-TiO₂ electrode with much reduced matrix effects under UV irradiation. Spectral observation, crystallographic analysis, pollutant degradation performance, radical inhibition, and surface enhanced Raman scattering tests reveal that both the fluorine-terminated surface chemical features and the bulk-free radical speciation are mainly responsible for the superior photochemical regeneration capacity of the Au/F-TiO₂ electrode. Even for the real biological samples, a stable electrochemical DA detection is also achieved on the Au/F-TiO₂ sensor. Our work establishes a new approach to refine electrochemical sensors for stable monitoring and provides a robust photoactive electrode substrate with high efficiency and low cost for practical applications.

Tetrakis(4-aminophenyl) ethene-doped perylene microcrystals with strong electrochemiluminescence for biosensing applications

A facile and economic method for the inhibition of ACQ effect was developed by doping of non-planar moleculars ETTA into Pe MCs, which exhibited almost 10 times stronger ECL signal in aqueous phase compared to that of pure Pe MCs.

Nature of the Synergistic Effect of N and S Co-Doped Graphene for the Enhanced Simultaneous Determination of Toxic Pollutants

N-doped graphene (NG), S-doped graphene (SG), and N and S co-doped graphene nanocatalysts with different doping sequences (N-SG and S-NG) are successfully synthesized by a facile low-temperature hydrothermal method. By changing the synthetic sequence, S-NG significantly increases the electron transport rate of the sensor and the electrocatalytic ability compared to NG, SG, and N-SG due to the optimal proportion of doping element content and suitable N- and S-bonding configurations. The origin of the synergistic effect of N and S co-doped graphene is confirmed. Traces of S doping greatly enhance the electrochemical performance. The large volume of S-O_x groups may prevent the analytes from approaching the catalytic sites of the sensing materials due to a steric hindrance effect. S-NG, which possesses less S-O_x groups, exhibits better performance than N-SG. Pyridinic N plays an important role in enhancing the electrochemical activity and conductivity. The simultaneous determination of aniline (AN), p-phenylenediamine (PPD), and nitrobenzene (NB) as typical toxic pollutants is performed by employing the S-NG nanoarchitecture. The detection limits (S/N = 3) for AN, PPD, and NB are 0.023, 0.051, and 0.216 μM, respectively. In addition, the S-NG sensors also have excellent anti-interference, stability, and reproducibility. The precise control and synthesis of multiheteroatoms into graphene represent a promising strategy to enhance the electrocatalytic performance in energy and environmental fields.

Impact of nano-morphology, lattice defects and conductivity on the performance of graphene based electrochemical biosensors

Diverse properties of graphenic materials have been extensively explored to determine properties that make good electrochemical nanomaterial-based biosensors. These are reviewed by critically examining the influence of graphene nano-morphology, lattice defects and conductivity. Stability, reproducibility and fabrication are discussed together with sensitivity and selectivity. We provide an outlook on future directions for building efficient electrochemical biosensors.

Signal Output of Triboelectric Nanogenerator at Oil-Water-Solid Multiphase Interfaces and its Application for Dual-Signal Chemical Sensing

A liquid-solid contact triboelectric nanogenerator (TENG) based on poly(tetrafluoroethylene) (PTFE) film, a copper electrode, and a glass substrate for harvesting energy in oil/water multiphases is reported. There are two distinctive signals being generated, one is from the contact electrification and electrostatic induction between the liquid (water/oil) and the PTFE film (V_TENG and I_TENG ); and the other is from the electrostatic induction in the copper electrode by the oil/water interfacial charges (ΔV_interface and I_interface ), which is generated only when the liquid-solid contact TENG is inserted across the oil/water interface. The two signals show interesting opposite changing trends that the V_TENG and I_TENG decrease while the oil/water interfacial signals of ΔV_interface and I_interface increase after coating a layer of polydopamine on the surfaces of PTFE and glass via self-polymerization. As an application of the observed phenomena, both the values of I_TENG and I_interface have a good linear relationship versus the natural logarithm of the concentration of the dopamine. Based on this, the first self-powered dual-signal detection of dopamine using TENG is demonstrated.

Single-Step Formation of Ni Nanoparticle-Modified Graphene-Diamond Hybrid Electrodes for Electrochemical Glucose Detection

The development of accurate, reliable devices for glucose detection has drawn much attention from the scientific community over the past few years. Here, we report a single-step method to fabricate Ni nanoparticle-modified graphene–diamond hybrid electrodes via a catalytic thermal treatment, by which the graphene layers are directly grown on the diamond surface using Ni thin film as a catalyst, meanwhile, Ni nanoparticles are formed in situ on the graphene surface due to dewetting behavior. The good interface between the Ni nanoparticles and the graphene guarantees efficient charge transfer during electrochemical detection. The fabricated electrodes exhibit good glucose sensing performance with a low detection limit of 2 μM and a linear detection range between 2 μM–1 mM. In addition, this sensor shows great selectivity, suggesting potential applications for sensitive and accurate monitoring of glucose in human blood.

Electrochemically reduced graphene oxide and gold nanoparticles on an indium tin oxide electrode for voltammetric sensing of dopamine

The authors describe an electrochemical dopamine sensor that is based on the use of electrochemically co-reduced graphene oxide (Er-GO) and gold nanoparticles (AuNPs) on an indium-tin oxide (ITO) electrode. The synergistic effects of Er-GO and Er-AuNPs promote electron transport in the modified ITO. This results in an excellent performance for voltammetric sensing of dopamine (DA). Under the optimum conditions and a typical working potential of -0.05 V (vs. Ag/AgCl), the ITO electrode has a linear response in the 0.02-200 μM DA concentration range and a low detection limit of 15 nM. The sensor also showed a good selectivity over ascorbic acid and uric acid. The feasibility of the method was studied by analyzing DA in cerebrospinal fluid of rats. Graphical abstract Schematic presentation of one-step electrochemical co-reduction of graphene oxide (GO) and gold nanoparticles (AuNPs) on an ITO electrode for voltammetric sensing of dopamine.

Loading of AgNPs onto the surface of boron nitride nanosheets for determination of scopoletin in Atractylodes macrocephala

In this work, silver nanoparticles prepared by a molten salt method were deposited onto the surface of hexagonal boron nitride nanosheet (NS/AgNP) to from a composite. The synthesized nanocomposite was applied for surface modification of screen-printed electrode (SPE). The modified electrode showed a superior performance for electrochemical detection of scopoletin. The electrochemical behaviour of NS/AgNP/SPE was studied in detail. An electrocatalytic oxidation was observed and used for analytical determination of scopoletin concentration. The response of the proposed electrochemical sensing platform was linear over a wide detection range of 2 μM to 0.45 mM with a low limit of detection (LOD) of 0.89 μM. The NS/AgNP/SPE also showed excellent reproducibility and anti-interference property. In addition, the proposed scopoletin sensor was successfully used for the determination of scopoletin in Atractylodes macrocephala herb samples.

High Sensitive Immunoelectrochemical Measurement of Lung Cancer Tumor Marker ProGRP Based on TiO₂-Au Nanocomposite

Progastrin-releasing peptide (ProGRP), which is known to be highly specific and sensitive to small cell lung cancer (SCLC), has been proven to be a valuable substitute for neuron-specific enolase in SCLC diagnostics and monitoring, especially in its early stages. The detection of ProGRP levels also facilitates a selection of therapeutic treatments. For the fabrication of our proposed biosensor, titanium (IV) oxide microparticles were first used, followed by dispersing gold nanoparticles into chitosan and immobilizing them onto a carbon paste electrode (CPE) surface. The developed immunosensor exhibits a much higher biosensing performance in comparison with current methods, when it comes to the detection of ProGRP. Therefore, the proposed CPE/TiO₂/(CS+AuNPs)/anti-ProGRP/BSA/ProGRP is excellent for the development of a compact diagnostics apparatus.

Electrochemical dopamine sensor based on the use of a thermosensitive polymer and an nanocomposite prepared from multiwalled carbon nanotubes and graphene oxide

An electrochemical dopamine sensor with a temperature-controlled switch was constructed by using a mixture of thermo-sensitive block copolymers (type tBA-PDEA-tBA), graphene oxide (GO) and multi-walled carbon nanotubes (MWCNTs). If the temperature is below 26 °C, the polymer on the glassy carbon electrode (GCE) is stretched, the distance between the MWCNTs is large, and the charge transfer resistance (R_ct) of the composite also is large. In the presence of dopamine, the electron transfer at the electrode is strongly retarded and in the "off" state. At above 38 °C, the polymer is shrunk and the R_ct is much smaller. The presence of dopamine results in a rapid electron transfer at the GCE, and this is referred to as the "on" state. At temperatures between 26 and 38 °C, the polymer shrinks slightly and has a "spring-like" state. There is a linear relationship between the response current (typically measured at a potential as low as 0.16 V vs. Ag/AgCl) and temperature. The response to dopamine is linear in the 0.06 to 4.2 μM and 4.2 to 18.2 μM concentration range, and the detection limit is 42 nM. Conceivably, this approach provides a novel approach towards the design of electrochemical sensors based on the use of thermo-sensitive polymers. Graphical abstract Schematic presentation of reversible and temperature-controlled electrochemical response of dopamine on the thermo-sensitive block copolymers (tBA-PDEA-tBA) / multi-walled carbon nanotubes (MWCNTs) / graphene oxide (GO) / glassy carbon electrode (GCE).

Facile synthesis of highly ordered mesoporous Fe3O4 with ultrasensitive detection of dopamine

Dopamine (DA) detection is significant for the prevention of unfavorable neuronal illness. However, the detection of DA with low concentration still face tremendous challenges. In this study, highly ordered mesoporous Fe₃O₄ materials were synthesized as a biosensor by using mesoporous silica KIT-6 with different aging temperature as hard template. The ordered mesoporous Fe₃O₄ with high surface area modified glassy carbon electrode shows the high sensitivity for detecting DA. Fe₃O₄-40 mesoporous material modified electrode has the highest catalytic activity to DA with a sensitivity of 0.053 nA nM^-1 and a detection limit of 0.8 nM (S/N = 3). The results indicating that the mesoporous Fe₃O₄ material modified electrode exhibits high sensitivity to determine DA at low levels, which can be used for DA real-time monitoring in neutral biological media.