Label-free photoelectrochemical immunosensor for NT-proBNP detection based on La-CdS/3D ZnIn2S4/Au@ZnO sensitization structure

Self-powered photochemical cathode aptamer sensor based on ZnIn2S4 photoanode and Cu2O@Ag@Ag3PO4 photocathode for the sensitive detection of Hg2

A self-powered photoelectrochemical (PEC) aptamer sensor based on ZnIn2S4 as the photoanode and Cu2O@Ag@Ag3PO4 as the sensing cathode is designed for the detection of Hg2+. An indium tin oxide (ITO) electrode modified with ZnIn2S4 was used instead of a platinum (Pt) counter electrode to provide an obviously stable photocurrent signal. The suitable band gap width of ZnIn2S4 can generate photogenerated electrons well. The unique hydrangea structure of ZnIn2S4 can enhance light absorption and accelerate the separation and transfer of photocarriers. At the same time, Cu2O@Ag@Ag3PO4 with excellent electrical conductivity further enhances the photocurrent provided by the ZnIn2S4 photoanode. Because the reducing substances in the biological medium can change the photoanode characteristics of the photoanode interface, the separation of the photoanode and the sensing bicathode is beneficial to improve the anti-interference ability of the sensor. Under optimized conditions, the PEC aptamer sensor realizes the detection of Hg2+ (1 mM-1 fM), and the detection limit is 0.4 fM. In addition, the constructed self-powered PEC sensor has good selectivity, repeatability, and stability, which provides a new idea for the design of the PEC aptamer sensor platform.

17β-estradiol biosensors based on different bioreceptors and their applications

17β-Estradiol (E2) is a critical sex steroid hormone, which has significant effects on the endocrine systems of both humans and animals. E2 is also believed to play neurotrophic and neuroprotective roles in the brain. Biosensors present a powerful tool to detect E2 because of their small, efficient, and flexible design. Furthermore, Biosensors can quickly and accurately obtain detection results with only a small sampling amount, which greatly meets the detection of the environment, food safety, medicine safety, and human body. This review focuses on previous studies of biosensors for detecting E2 and divides them into non-biometric sensors, enzyme biosensors, antibody biosensors, and aptamer biosensors according to different bioreceptors. The advantages, disadvantages, and design points of various bioreceptors for E2 detection are analyzed and summarized. Additionally, applications of different bioreceptors of E2 detection are presented and highlight the field of environmental monitoring, food and medicine safety, and disease detection in recent years. Finally, the development of E2 detection by biosensor is prospected.

Advanced Nanomaterial-Based Biosensors for N-Terminal Pro-Brain Natriuretic Peptide Biomarker Detection: Progress and Future Challenges in Cardiovascular Disease Diagnostics

Cardiovascular diseases (CVDs) represent a significant challenge in global health, demanding advancements in diagnostic modalities. This review delineates the progressive and restrictive facets of nanomaterial-based biosensors in the context of detecting N-terminal pro-B-type natriuretic peptide (NT-proBNP), an indispensable biomarker for CVD prognosis. It scrutinizes the escalation in diagnostic sensitivity and specificity attributable to the incorporation of novel nanomaterials such as graphene derivatives, quantum dots, and metallic nanoparticles, and how these enhancements contribute to reducing detection thresholds and augmenting diagnostic fidelity in heart failure (HF). Despite these technological strides, the review articulates pivotal challenges impeding the clinical translation of these biosensors, including the attainment of clinical-grade sensitivity, the substantial costs associated with synthesizing and functionalizing nanomaterials, and their pragmatic deployment across varied healthcare settings. The necessity for intensified research into the synthesis and functionalization of nanomaterials, strategies to economize production, and amelioration of biosensor durability and ease of use is accentuated. Regulatory hurdles in clinical integration are also contemplated. In summation, the review accentuates the transformative potential of nanomaterial-based biosensors in HF diagnostics and emphasizes critical avenues of research requisite to surmount current impediments and harness the full spectrum of these avant-garde diagnostic instruments.

Biosensors for natriuretic peptides in cardiovascular diseases. A review

Heart failure (HF) is a complex clinical syndrome associated with high rates of morbidity and mortality. Over the years, it has been crucial to find accurate biomarkers capable of doing a precise monitor of HF and provide an early diagnosis. Of these, it has been established an important role of natriuretic peptides in HF assessment. Moreover, the development of biosensors has been garnering interest as new diagnostic medical tools. In this review we first provide a general overview of HF, its pathogenesis, and diagnostic features. We then discuss the role of natriuretic peptides in heart failure by characterizing them and point out their potential as biomarkers. Finally, we adress the evolution of biosensors development and the available natriuretic peptides biosensors for disease monitoring.

Polyacrylic acid/polyethylene glycol hybrid antifouling interface for photoelectrochemical immunosensing of CYFRA 21-1 based on TiO2/PpIX/Ag@Cu2O composite

A photoelectrochemical (PEC) transducer based on composite TiO₂/PpIX/Ag@Cu₂O was prepared for the detection of CYFRA 21-1. TiO₂ nanomaterials were synthesized by hydrothermal method. TiO₂/PpIX/Ag@Cu₂O composites were obtained by combining protoporphyrin Ⅸ (PpIX) molecules and Ag@Cu₂O on TiO₂. This composite material has strong absorption in visible light region and excellent photoelectric chemical properties. Ascorbic acid (AA) is a good electron donor, which can remove photogenerated holes in liquid environment to inhibit the recombination of photogenerated electrons and hole pairs, thus enhancing the photocurrent and improving its stability. The results showed that the sensor can quantitatively test CYFRA 21-1 in the range of 0.1 pg/mL∼100 ng/mL. The photoelectric chemical sensor has the advantages of high sensitivity, low detection line limit and wide linear range.

Shape dependency of gold nanorods through TMB2+-mediated etching for the visual detection of NT-proBNP

Heart failure (HF) is a major public health problem triggered by heart circulation disorders. Early detection and diagnosis are conducive to the prevention and treatment of HF. Hence, it is necessary to establish a simple and sensitive method to monitor the diagnostic biomarkers of HF. The N-terminal B-type natriuretic peptide precursor (NT-proBNP) is acknowledged as a sensitive biomarker. In this study, a visual detection method for NT-proBNP was developed based on the oxidized 3,3',5,5'-tetramethylbenzidine (TMB2+)-mediated etching of gold nanorods (AuNRs) and double-antibody-sandwich ELISA. The etching color for different amounts of NT-proBNP was obvious and significant differences could be ascertained based on the blue-shift of the longitudinal localized surface plasmon resonance (LLSPR) of the AuNRs. The results could be observed by the naked eye. The constructed system showed a concentration range from 6 to 100 ng mL-1 and a low detection limit of 6 ng mL-1. This method exhibited negligible cross-reactivity toward other proteins, and the recoveries of the samples ranged from 79.99% to 88.99%. These results demonstrated that the established method is suitable for the simple and convenient detection of NT-proBNP.

Signal-On Near-Infrared Photoelectrochemical Aptasensors for Sensing VEGF165 Based on Ionic Liquid-Functionalized Nd-MOF Nanorods and In-Site Formation of Gold Nanoparticles

The low photon energy and deep penetrating ability of near-infrared (NIR) light make it an ideal light source for a photoelectrochemical (PEC) immunosensing system. Absorption wavelengths of the metal-organic frameworks (MOFs) can be regulated by adjusting the metal ions and the conjugation degree of the ligands. Herein, an ionic liquid with a large conjugated structure was synthesized and was used as a ligand to coordinate with Nd ions to prepare Nd-MOF nanorods with a band gap of 1.26 eV. The Nd-MOF rods show a good photoabsorption property from 200 to 980 nm. A PEC platform was constructed by using Nd-MOF nanorods as the photoelectroactive element. A detachable double-stranded DNA labeled with alkaline phosphatase (ALP), which is specific to VEGF165, was immobilized onto the PEC sensing interface. After blocking unspecific active sites with bovine albumin, an NIR PEC aptasensing system was developed for VEGF165 detection. After being incubated in a mixture of VEGF165, l-ascorbic acid 2-phosphate (magnesium salt hydrate) (AAP), and chloroauric acid, the aptamers for VEGF165 were detached from the PEC aptasensing interface, thus resulting in the decrease of the charge-transfer resistance and the increase of the photocurrent response. The shedding of the aptamers also makes the ALP approach the electrode surface, thus catalyzing the reduction of AAP to produce ascorbic acid (AA). Subsequently, AA reduces in situ chloroauric acid to produce AuNPs on the Nd-MOF-based sensing interface. With the excellent conductivity and localized surface plasmon resonance effect, the AuNPs can accelerate the separation of electron-hole pairs generated from Nd-MOF nanorods, thus promoting the photoelectric conversion efficiency and achieving signal amplification. Under optimized conditions, the PEC responses were linearly related to the VEGF165 concentrations in the range of 0.01-100 ng mL^-1 and exhibit a low detection limit of 3.51 pg mL^-1 (S/N = 3). VEGF165 in human serum samples was detected by the NIR PEC aptasensor. Their concentrations were found to be well consistent with that obtained from ELISA. Furthermore, the PEC aptasensor demonstrated recoveries from 96.07 to 103.8%. The relative standard deviations were within 5%, indicating good accuracy and precision. The results further verify its practicability for clinical diagnosis.

CoNi-RGO and NiCo2S4-ZIF/g-C3N4 signal amplified electrochemical immunosensors for sensitive detection of CYFRA 21-1

Herein, a signal amplified electrochemical immunosensor for the sensitive detection of cytokeratin 19 fragments (CYFRA 21-1) in human serum was discussed. The CoNi-RGO was used as a substrate for the sensor with excellent specific surface area and strong electrical conductivity, which enables more efficient attachment of antibodies. The introduction of the bimetallic sulfide NiCo₂S₄ composite ZIF material provides strong catalytic performance for the immunosensor. It is worth noting that, in addition to these satisfactory advantages, these two materials also show amazing signal amplification capacity. When the immunosensor works, the increase in electrical impedance decreases the electron transfer rate, making the electrochemical signal change obvious. The signal enhancement of immunosensors was emphasized by the marker during construction, and the experimental results were satisfactory. The proposed signal enhanced immunosensor had a linear relationship in the range of 0.001-10 ng/mL for CYFRA 21-1, and the minimum detection limit was 0.33 pg/mL for △I = 95.22 + 23.27 lg c. This demonstrates that the electrochemical immunosensor we constructed is successful and has a great developing potential.

Electroanalytical point-of-care detection of gold standard and emerging cardiac biomarkers for stratification and monitoring in intensive care medicine - a review

Determination of specific cardiac biomarkers (CBs) during the diagnosis and management of adverse cardiovascular events such as acute myocardial infarction (AMI) has become commonplace in emergency department (ED), cardiology and many other ward settings. Cardiac troponins (cTnT and cTnI) and natriuretic peptides (BNP and NT-pro-BNP) are the preferred biomarkers in clinical practice for the diagnostic workup of AMI, acute coronary syndrome (ACS) and other types of myocardial ischaemia and heart failure (HF), while the roles and possible clinical applications of several other potential biomarkers continue to be evaluated and are the subject of several comprehensive reviews. The requirement for rapid, repeated testing of a small number of CBs in ED and cardiology patients has led to the development of point-of-care (PoC) technology to circumvent the need for remote and lengthy testing procedures in the hospital pathology laboratories. Electroanalytical sensing platforms have the potential to meet these requirements. This review aims firstly to reflect on the potential benefits of rapid CB testing in critically ill patients, a very distinct cohort of patients with deranged baseline levels of CBs. We summarise their source and clinical relevance and are the first to report the required analytical ranges for such technology to be of value in this patient cohort. Secondly, we review the current electrochemical approaches, including its sub-variants such as photoelectrochemical and electrochemiluminescence, for the determination  of important CBs highlighting the various strategies used, namely the use of micro- and nanomaterials, to maximise the sensitivities and selectivities of such approaches. Finally, we consider the challenges that must be overcome to allow for the commercialisation of this technology and transition into intensive care medicine.

Ultrasensitive dynamic light scattering immunosensing platform for NT-proBNP detection using boronate affinity amplification

Herein, we reported a new dynamic light scattering (DLS) immunosensing technology for the rapid and sensitive detection of glycoprotein N-terminal pro-brain natriuretic peptide (NT-proBNP). In this design, the boronate affinity recognition based on the interaction of boronic acid ligands and cis-diols was introduced to amplify the nanoparticle aggregation to enable highly sensitive DLS transduction, thereby lowering the limit of detection (LOD) of the methodology. After covalently coupling with antibodies, magnetic nanoparticles (MNPs) were employed as the nanoprobes to selectively capture trace amount of NT-proBNP from complex samples and facilitate DLS signal transduction. Meanwhile, silica nanoparticles modified with phenylboronic acid (SiO₂@PBA) were designed as the crosslinking agent to bridge the aggregation of MNPs in the presence of target NT-proBNP. Owing to the multivalent and fast affinity recognition between NT-proBNP containing cis-diols and SiO₂@PBA, the developed DLS immunosensor exhibited charming advantages over traditional immunoassays, including ultrahigh sensitivity with an LOD of 7.4 fg mL⁻¹, fast response time (< 20 min), and small sample consumption (1 μL). The DLS immunosensor was further characterized with good selectivity, accuracy, precision, reproducibility, and practicability. Collectively, this work demonstrated the promising application of the designed boronate affinity amplified-DLS immunosensor for field or point-of-care testing of cis-diol-containing molecules.

We developed a new DLS immunosensing technology for the rapid and sensitive detection of glycoprotein NT-proBNP.

The boronate affinity recognition amplified nanoparticle aggregation was designed to enable highly sensitive DLS transduction.

The fabricated DLS immunosensor exhibited ultrahigh sensitivity with an LOD of 7.4 fg mL⁻¹, fast response time (< 20 min), and small sample consumption (1 μL).

This boronate affinity amplified-DLS immunosensor has broad prospects for field or point-of-care testing of cis-diol-containing molecules.

Recent Advances of Nanostructured Materials for Photoelectrochemical Bioanalysis

Nowadays, the emerging photoelectrochemical (PEC) bioanalysis has drawn intensive interest due to its numerous merits. As one of its core elements, functional nanostructured materials play a crucial role during the construction of PEC biosensors, which can not only be employed as transducers but also act as signal probes. Although both chemical composition and morphology control of nanostructured materials contribute to the excellent analytical performance of PEC bioassay, surveys addressing nanostructures with different dimensionality have rarely been reported. In this review, according to classification based on dimensionality, zero-dimensional, one-dimensional, two-dimensional, and three-dimensional nanostructures used in PEC bioanalysis are evaluated, with an emphasis on the effect of morphology on the detection performances. Furthermore, using the illustration of recent works, related novel PEC biosensing patterns with promising applications are also discussed. Finally, the current challenges and some future perspectives in this field are addressed based on our opinions.

A Label-Free Electrochemical Immunosensor for CEA Detection on a Novel Signal Amplification Platform of Cu2S/Pd/CuO Nanocomposites

Carcinoembryonic antigen (CEA) is regarded as one of the crucial tumor markers for colorectal cancer. In this study, we developed the snowflake Cu₂S/Pd/CuO nanocomposite to construct an original label-free electrochemical immunosensor for the ultrasensitive detection of CEA levels. The nanocomposite of cuprous sulfide (Cu₂S) with Pd nanoparticles (Pd NPs) was synthesized through an in situ formation of Pd NPs on the Cu₂S. Cuprous sulfide (Cu₂S) and CuO can not only be used as a carrier to increase the reaction area but also catalyze the substrate to generate current signal. Palladium nanoparticles (Pd NPs) have excellent catalytic properties and good biocompatibility, as well as the ability of excellent electron transfer. The immunosensor was designed using 5 mmol/L H₂O₂ as the active substrate by optimizing the conditions with a detection range from 100 fg/ml to 100 ng/ml and a minimum detection limit of 33.11 fg/ml. The human serum was detected by electrochemical immunoassay, and the results were consistent with those of the commercial electrochemical immunosensor. Therefore, the electrochemical immunosensor can be used for the detection of human serum samples and have potential value for clinical application.

Ultrasensitive Double-Channel Microfluidic Biosensor-Based Cathodic Photo-electrochemical Analysis via Signal Amplification of SOD-Au@PANI for Cardiac Troponin I Detection

Interesting double-channel microfluidic chip integration with a sandwich-type cathodic photo-electrochemical (PEC) biosensor is utilized for ultrasensitive and efficient detection of cardiac troponin I (cTnI) based on a signal amplification strategy. The Pd nanoparticles loading on the I-doped bismuth oxybromide with oxygen vacancies (Pd/I:BiOBr-OVs) as a sensing platform can effectively enhance cathodic photocurrent response by improving the visible light absorption ability with I doping, facilitating the efficiency separation of photogenerated electron-hole pairs with OVs, and increasing the electron-transfer rate with Pd loading, where the photogenerated electron could be captured by dissolved O₂ to boost generation of a superoxide anion radical (^•O₂^-). To further enhance the PEC response, a novel superoxide dismutase loaded on gold@polyaniline (SOD-Au@PANI) as a signal amplification label is developed for incubating the detection antibody (dAb). It is particularly noteworthy that SOD can effectively catalyze dismutation of the ^•O₂^- to produce H₂O₂ and O₂, and Au@PANI with a good reduction and catalytic property can catalyze the produced H₂O₂ into H₂O and O₂. Then, the produced O₂ that has been dissolved or adsorbed can capture more photogenerated electrons, resulting in more electron-hole pairs to separate, so as to the cathodic photocurrent signal of this system which can be amplified more significantly. Therefore, a signal amplification cathodic PEC biosensor is prepared for sensitively detecting cTnI, in which a good linearity ranging from 0.1 pg/mL to 100 ng/mL with a low detection limit of 0.042 pg/mL is obtained. Furthermore, the proposed biosensor exhibits excellent sensitivity and high selectivity, which could be extended to detect other disease markers in biological analysis and early disease diagnosis.

Hollow performances quenching label of Au NPs@CoSnO3 nanoboxes-based sandwich photoelectrochemical immunosensor for sensitive CYFRA 21-1 detection

In this work, a fire-new "signal-off" type photoelectrochemical (PEC) immunosensor based on bismuth sulfide/iodine doped bismuth oxychloride (Bi₂S₃/I:BiOCl) heterostructure as a platform and Au nanoparticles loaded hollow CoSnO₃ nanoboxes (Au NPs@CoSnO₃) as quenching label was designed, for sensitive detection of CYFRA 21-1. The I:BiOCl with flower-like structure could supply high specific surface area for loading nanometer materials. Then, Bi₂S₃ was formed in-situ by S^2- adsorption on the surface of I:BiOCl by dangling bond of Bi³⁺, but did not change the flower-like structure of I:BiOCl. Then, n-type Bi₂S₃ and p-type I:BiOCl heterostructure showed good photoelectric behavior by providing an additional electric field to accelerate electron-hole separation. Furthermore, the production process of the heterostructure was simple, fast, low temperature, and without complex raw materials. The Au NPs@CoSnO₃ with good photocatalytic activity could strongly compete with Bi₂S₃/I:BiOCl for electron donor of ascorbic acid (AA). Meanwhile, the CoSnO₃ with hollow structure made the quenching effect more significant by the light-scattering effect that enhanced the light absorption capacity and shorten distance of carrier transport. Under optimal conditions, this proposed strategy displayed the low detection limit of 30 fg/mL, with a high linearity range from 100 fg/mL to 100 ng/mL for tumor markers CYFRA 21-1. Simultaneously, it also exhibited excellent specificity and acceptable stability, which might provide a new perspective for the fabrication of other PEC immunosensors with heterostructure simple synthesis and hollow materials.

Multi-function PtCo nanozymes/CdS nanocrystals@graphene oxide luminophores and K2S2O8/H2O2 coreactants-based dual amplified electrochemiluminescence immunosensor for ultrasensitive detection of anti-myeloperoxidase antibody

Background

Anti-myeloperoxidase antibody (anti-MPO) is an important biomarker for anti-neutrophil cytoplasm antibody (ANCA)-associated vasculitides (AAVs). However, the complicated operation procedures and insufficient sensitivity of conventional anti-MPO detection methods limit their application in monitoring efficacy of AAVs in clinical diagnosis. Herein, a dual amplified electrochemiluminescence (ECL) immunosensor based on multi-function PtCo nanozymes/CdS nanocrystals@graphene oxide (PtCo/CdS@GO) luminophores and K₂S₂O₈/H₂O₂ coreactants has been fabricated for ultrasensitive detection of anti-MPO.

Results

PtCo/CdS@GO luminophores as novel signal amplification labels and nanocarriers to load rabbit anti-mouse IgG were synthesized by co-doping with Pt and Co nanozymes simultaneously with several considerable advantages, including astonishing peroxidase-like catalytic activity, high-efficiency luminescence performance and superior stability in aqueous solutions. Meanwhile, upon the K₂S₂O₈/H₂O₂ coreactants system, benefiting from the efficient peroxidase-like activity of the PtCo/CdS@GO toward H₂O₂, massive of transient reactive intermediates could react with K₂S₂O₈, thus obtaining higher ECL emission. Therefore, the developed ECL immunosensor for anti-MPO detection displayed good analytical performance with good concentration linearity in the range of 0.02 to 1000 pg/mL and low detection limit down to 7.39 fg/mL.

Conclusions

The introduction of multi-function PtCo/CdS@GO luminophores into the established ECL immunoassay not only was successfully applied for specific detection of anti-MPO in clinical serum samples, but also provided a completely new concept to design other high-performance luminophores. Meaningfully, the ECL immunoassay strategy held wide potential for biomarkers detection in clinical diagnosis.

Graphic abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-00968-4.

A signal amplification of p DNA@Ag2S based photoelectrochemical competitive sensor for the sensitive detection of OTA in microfluidic devices

In this work, a signal amplification competitive-type photoelectrochemical system comprised of bismuth sulfide/bismuth oxyiodide/zinc oxide (Bi₂S₃/BiOI/ZnO) nano-array as platform and Ag₂S-modified aptamers probe DNA (p DNA@Ag₂S) as competition content for rapid and sensitive detection of OTA in microfluidic devices. The BiOI nano-array was first growth on surfaces of ZnO by a simple electrodeposited method, which provided large specific surface area and high stability to solve distribution of sensing platform and loose of combination of sensing substrate. Then, the Bi₂S₃ could be in-situ growth by self-sacrificial part Bi³⁺ of BiOI to form heterojunction without destroying the structure of the nano-array. A strong photocurrent intensity was acquired by the Bi₂S₃/BiOI/ZnO modified onto indium tin oxide (ITO) electrode, due to its good matching cascade band-edge levels could improve efficient separation of photo-generated e^-/h⁺ pairs. After immobilizing with the capture DNA (c DNA) and the sequential hybridization of p DNA@Ag₂S, the photocurrent intensity reduced obviously because part photo-generated electron transformed to Ag₂S rather than Bi₂S₃/BiOI/ZnO electrode. Subsequently, the photocurrent intensity increased evident when immobilized the target OTA, owing to the OTA could bind the p DNA@Ag₂S to form the specific-complex that were released from the electrode surface. Under optimal conditions, the prepared PEC microfluidic sensor exhibited a linear concentration of OTA from 0.01 pg/mL to 200 ng/mL with a low detection limit of 0.0035 pg/mL (S/N = 3). Furthermore, it achieved high sensitivity, good specificity, and acceptable stability and further provided an efficient method for sensitive detection of other target mycotoxins in practical application.

A self-powered photoelectrochemical cathodic aptasensor for the detection of 17β-estradiol based on FeOOH/In2S3 photoanode

In this work, a novel self-powered photoelectrochemical (PEC) aptasensor integrated photoanode and photocathode for the accurate and selective detection of 17β-estradiol (E₂) was proposed for the first time. FeOOH/In₂S₃ heterojunction was built initially and used as a substitute for platinum (Pt) counter electrode. The matched band gap edge of FeOOH and In₂S₃ facilitated the transfer of photo-generate electrons to photoanode, while the holes left in the valence band of photocathode (CuInS₂) can be attracted by the electrons flowed from the photoanode, which reduced the recombination of electron-hole pairs and promote the cathodic photocurrent. Under optimal conditions, the constructed cathodic aptasensor of E₂ presented linear scope in 10 fg/mL-1 μg/mL with detection limit of 3.65 fg/mL. Besides, the cathodic aptasensor exhibited admiring selectivity, stability and reproducibility. This work verified that the cathodic photocurrent response can be regulated by the corresponding photoanode which provided a new design thought for PEC aptasensor on the basis of p-type semiconductor.

A dual mode photoelectrochemical sensor for nitrobenzene and L-cysteine based on 3D flower-like Cu2SnS3@SnS2 double interfacial heterojunction photoelectrode

In this work, 3D hierarchical Cu₂SnS₃@SnS₂ flower assembled from nanopetals with sandwich-like Cu₂SnS₃-SnS₂-Cu₂SnS₃ double interfacial heterojunction was successfully designed and synthesized on fluoride doped tin oxide (FTO) for photoelectrochemical (PEC) sensor by in situ electrodeposition p-type Cu₂SnS₃ nanoparticles on both inner and outer surfaces of n-type SnS₂ nanopetals. The unique double interfacial heterojunction simultaneously combines 3D flower-like architectures to drastically increase the light trapping and absorption in visible-near infrared range (Vis-NIR), and dramatically inhibites the charge carrier recombination, which is crucial for boosting the PEC activity. Benefitting from the shape and compositional merits, the Cu₂SnS₃@SnS₂ heterojunction possess dual-mode signal by controlling the electrodeposition time to manipulate the composition ratio of Cu₂SnS₃ and SnS₂. The Cu₂SnS₃@SnS₂/FTO electrode not only exhibits excellent photoeletro-reduction capacity for ultra-sensitive sensing trace persistent organic pollutant (nitrobenzene, NB), but also presents photoeletro-oxidization activity for high selective detection of L-cysteine (L-Cys) without any auxiliary enzyme under the light illumination. Dual mode sensor displayed superb performance for the detection of NB/L-Cys, showing a wide linear range from 100 pM to 300 μM/10 nM to 100 μM and a low detection limit (3S/N) of 68 pM/8.5 nM, respectively. Such a tunable double interfacial heterojunction design opened up new avenue for constructing multifunction PEC sensing platform.

A photoelectrochemical aptasensor for the detection of 17β-estradiol based on In2S3 and CdS co-sensitized cerium doped TiO2

In₂S₃ and CdS co-sensitized Ce doped TiO₂ optimized the transmission path of electrons.

Recent Progress of Biomarker Detection Sensors

Early cancer diagnosis and treatment are crucial research fields of human health. One method that has proven efficient is biomarker detection which can provide real-time and accurate biological information for early diagnosis. This review presents several biomarker sensors based on electrochemistry, surface plasmon resonance (SPR), nanowires, other nanostructures, and, most recently, metamaterials which have also shown their mechanisms and prospects in application in recent years. Compared with previous reviews, electrochemistry-based biomarker sensors have been classified into three strategies according to their optimizing methods in this review. This makes it more convenient for researchers to find a specific fabrication method to improve the performance of their sensors. Besides that, as microfabrication technologies have improved and novel materials are explored, some novel biomarker sensors-such as nanowire-based and metamaterial-based biomarker sensors-have also been investigated and summarized in this review, which can exhibit ultrahigh resolution, sensitivity, and limit of detection (LoD) in a more complex detection environment. The purpose of this review is to understand the present by reviewing the past. Researchers can break through bottlenecks of existing biomarker sensors by reviewing previous works and finally meet the various complex detection needs for the early diagnosis of human cancer.

A novel approach to photoelectrochemical immunoassay for procalcitonin on the basis of SnS2/CdS

A label-free photoelectrochemical (PEC) immunoassay system based on the one-step synthesis of SnS₂/CdS nanocomposites is successfully constructed for sensitively analyzing procalcitonin (PCT).

Photoelectrochemical competitive immunosensor for 17β-estradiol detection based on ZnIn2S4@NH2-MIL-125(Ti) amplified by PDA NS/Mn:ZnCdS

A competitive-type PEC immunosensor for 17β-estradiol (E₂) detection was successfully fabricated using ZnIn₂S₄@NH₂-MIL-125(Ti) composite as matrix. The excellent PEC behavior of ZnIn₂S₄@NH₂-MIL-125(Ti) composite could be attributed to that the Ti⁴⁺-Ti³⁺ intervalence cycles in the titanium oxo-cluster of NH₂-MIL-125(Ti) as well as the matching energy level between ZnIn₂S₄ and NH₂-MIL-125(Ti) promote the migration and separation of photocarrier. Besides, polydopamine (PDA) with abundant amino- and quinone-groups was selected to further improve the PEC signals and capture antibody, which implement through the covalent bonding of PDA and BSA-E₂ or carboxyl-group functionalized Mn:ZnCdS QDs in the competitive-type strategy. Concretely, the quinone functional groups in PDA film was applied to immobilize BSA-E₂ through Michael reactions, and the PDA nanosphere loaded Mn:ZnCdS quantum dot (PDA NS/Mn:ZnCdS QDs) was used as antibodies' labels to amplify PEC signals. After PDA NS/Mn:ZnCdS-anti-E₂ immobilized on the modified electrode, a remarkable increase of photocurrent signal was observed owing to the specific bonding of antigen and antibody. Based on the competitive binding of PDA NS/Mn:ZnCdS-anti-E₂ with either free E₂ or bovine serum albumin (BSA)-E₂ causing the change of the photocurrent signal, the standard sample free E₂ could be accuracy detect. Under optimal conditions, the competitive-type PEC immunosensor exhibited the linear range from 0.0005 ng/mL to 20 ng/mL and a limit detection of 0.3 pg/mL (S/N = 3). Meanwhile, the acceptable stability, selectivity and reproducibility of the proposed PEC immunosensing platform indicating the promising detection of small molecular environmental pollutants.

An electrochemiluminescence immunosensor for the N-terminal brain natriuretic peptide based on the high quenching ability of polydopamine

A sandwich-type electrochemiluminescence (ECL) immunosensor for the N-terminal brain natriuretic peptide (NT-proBNP) is described. The assay is based on the quenching of the ECL of graphite-like carbon nitride (g-C₃N₄) by polydopamine (PDA). Two-dimensional g-C₃N₄ is grown in-situ on titanium dioxide nanoflowers (TiO₂ NFs). The macroporous structure of the NFs enhances the interfacial stability of g-C₃N₄, and also promotes the ECL reaction of g-C₃N₄ with the co-reactant. The introduction of gold nanoparticles into the matrix further enhances the ECL and facilitates the immobilization of capture antibodies. The nanoquencher used to label the secondary antibody is synthesized by catalytic polymerization of dopamine in the presence of bimetallic NiPd nanoparticles. The nanoquencher preserves the high reactivity of polydopamine and quenches the ECL of the g-C₃N₄/TiO₂ system. Compared to other methods, the detection limit for NT-proBNP is decreased to 50 fg∙mL^-1. Graphical abstract Schematic presentation of the electrochemiluminescence (ECL) process of the immunosensor: titanium dioxide nanoflowers@graphite-like carbon nitride-gold nanoparticles (TiO₂ NFs@g-C₃N₄-Au) as luminophor, and polydopamine (PDA) as nanoquencher.

Photoelectrochemical biosensor for CEA detection based on SnS2-GR with multiple quenching effects of Au@CuS-GR

A novel signal on-off type photoelectrochemical (PEC) biosensing system was designed for sensitive detection of carcinoembryonic antigen (CEA) based on tin disulfide nanosheets loaded on reduced graphene cxide (SnS₂-GR) as the photoactive material and gold nanoparticles coated on reduced graphene oxide-functionalized copper sulfide (Au@CuS-GR) for signal amplification. It's the first time for SnS₂-GR was exploited as a sensing matrix. Here, the photocurrent signals of SnS₂ were amplified attributed to the sensitization effect of graphene. As signal amplifier, Au@CuS-GR could quench the photocurrents of SnS₂-GR not only through the p-n type semiconductor quenching effect as well as the steric hindrance effect, but also as peroxidase mimetics to catalyze the oxidation of 4-Chloro-1-naphthol (4-CN) to produce insoluble product on the electrode surface. Based on the multiple signal amplification ability of Au@CuS-GR, CEA was detected sensitively with a linear range from 0.1 pg mL^-1 to 10 ng mL^-1 and limit of detection down to 59.9 fg mL^-1 (S/N = 3). Meanwhile, the PEC biosensor displayed excellent performance in the assay of human serum sample, showing good application prospects for various target analysis.

AuCu xO-Embedded Mesoporous CeO2 Nanocomposites as a Signal Probe for Electrochemical Sensitive Detection of Amyloid-Beta Protein

A sandwich-type electrochemical immunosensor for detecting amyloid-beta protein was fabricated based on Au NP-functionalized reduced graphene oxide (Au@rGO) as an effective sensing platform and AuCu _xO-embedded mesoporous CeO₂ (AuCu _xO@m-CeO₂) nanocomposites as the catalytic matrix. The AuCu _xO@m-CeO₂ composites were obtained by adjusting the amount of m-CeO₂ in the reaction to expose enormous active sites. Also, AuCu _xO@m-CeO₂ was applied as a matrix to immobilize antibodies by forming bridged bonds between m-CeO₂ and carboxyl functional groups of antibodies without additional agents. Furthermore, AuCu _xO with prominent catalytic activities dramatically improved the performance of the fabricated immunosensor. Also, the morphology, structure, and electronic state of the surface were characterized by SEM, XRD, TEM, and XPS. In addition, the immunosensor demonstrated a wide linear range of 100 fg mL^-1 to 10 ng mL^-1. This study may provide a way for sensitively detecting various biomarkers.

A novel sandwich-type photoelectrochemical immunosensor based on Ru(bpy)32+ and Ce-CdS co-sensitized hierarchical ZnO matrix and dual-inhibited polystyrene@CuS-Ab2 composites

A novel and sensitive sandwich-type photoelectrochemical (PEC) immunosensor was developed for the quantitative detection of β-amyloid protein (Aβ). A ITO electrode was sequentially coated with hierarchical porous zinc oxide (ZnO) microspheres with a large specific area, sensitized with tris(bipyridine)ruthenium(II) ion (Ru(bpy)₃²⁺) to achieve high visible light absorption, and modified with cerium-doped cadmium sulfide (Ce-CdS) nanoparticles to enhance the PEC response. Under the stimulation of visible light and ascorbic acid as an efficient electron donor, the photoelectric signal of ZnO/Ru(bpy)₃²⁺/Ce-CdS was 70 times that of pure ZnO. The amino-functionalized polystyrene (PS) microspheres coated with copper sulfide (CuS) was linked with a secondary antibody (Ab₂) for the first time for the Aβ detection by the immunosensor. The good insulation and steric resistance of the as-prepared polystyrene@CuS-Ab₂ (PS@CuS-Ab₂) composite significantly weakened the photocurrent response of the immunosensor in the specific immune recognition. Under the optimal conditions, the quantitative detection of Aβ was achieved within the range of 0.001-100 ng/mL with the detection limit of 0.37 pg/mL. In addition, the PEC immunosensor is easy to make, stable and selective, which has provided a good experimental platform for the detection of disease biomarkers.

An amplification label of core–shell CdSe@CdS QD sensitized GO for a signal-on photoelectrochemical immunosensor for amyloid β-protein

Core–shell CdSe@CdS QDs conjugated with GO can enhance the photocurrent intensity.