Au nanoparticles functionalized 3D-MoS2 nanoflower: An efficient SERS matrix for biomolecule sensing

High-throughput and high-sensitive direct detection for pathogenic bacteria of urinary tract infections mediated by block-based design of flexible non-metallic composite SERS substrate

It remains a huge challenge to realize a high-throughput direct detection for pathogenic bacteria with high-sensitivity in practice. Here, we develop a typical two-dimensional (2D) composite semiconductor of BP@MoS2 with special synergistic chemical enhancement-mediated surface-enhanced Raman scattering (SERS) activity. The relative proportion of MoS2 and BP was rationally adjusted in the hydrothermal reaction to screen a composite sample with high charge transfer efficiency. Furthermore, the optimal BP@MoS2 nanocomposites were integrated with polydimethylsiloxane (PDMS) film based on a hydrophilic-hydrophobic scheme to improve the collection and on-site monitoring capability of SERS substrate. Unlike the conventional detection chip, this hydrophilic-hydrophobic model could facilitate the block design of active areas on the PDMS matrix, which was benefit for the high-throughput detection. More importantly, this SERS substrate was applied to directly monitor urinary tract pathogens of Escherichia coli, facilitating satisfactory recoveries between 90% and 110%. Overall, the as-proposed PDMS-BP@MoS2 SERS substrate exhibited advantages in the collection, quantification, and high-throughput fingerprint recognition of pathogenic bacteria, offering a new avenue for the clinical detection.

Ultrasensitive detection of contaminants in milk using a novel NMS-Ag modified water-resistant paper substrate

Rapid and precise detection of harmful substances in food products is essential for ensuring public health and safety. This study introduces a novel surface-enhanced Raman spectroscopy (SERS) substrate, composed of a molybdenum disulfide‑silver nanocomposite, applied to flexible, water-resistant filter paper for detecting melamine and bisphenol A (BPA) in milk. Optimized molybdenum disulfide (NMS) nanoflowers (NFs) were synthesized through hydrothermal methods and high-temperature annealing, then modified with silver (Ag) nanoparticles to form the NMS-Ag nanocomposite (NMSA6). This substrate greatly enhances the Raman signal, achieving an enhancement factor of approximately 1.49 × 107 and a detection limit as low as 10-11 M for simultaneous multi-component analysis. Finite-difference time-domain (FDTD) simulations confirm the enhancement mechanism. The NMSA6 substrate demonstrates remarkably low detection limits for BPA and melamine, facilitating the analysis of various hazardous substances. These findings highlight the substrate's potential for highly sensitive, label-free detection, presenting a viable tool for food safety monitoring.

Surface encapsulation of ZIF-8 on Ag nanoparticles modified cotton swab for highly rapid and selective surface-enhanced Raman spectroscopy analysis of glucose and lactic acid in human sweat

Herein, ZIF-8 shell encapsulated Ag nanoparticles decorated cotton swab (CS@Ag@ZIF-8) was firstly designed and prepared for highly rapid and selective surface-enhanced Raman spectroscopy (SERS) analysis of glucose and lactic acid in human sweat. The CS not only act as support matrix for Ag modification and ZIF-8 encapsulation, but also provide great potential in-situ analysis of human sweat with low cost. The as-developed CS@Ag@ZIF-8 shows high SERS activity owing the good adsorption of ZIF-8 shell and electromagnetic enhancement of AgNPs. The 4-mercaptophenylboronic acid (4-MPBA) and 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB) with limits of detection (LOD) of 1.0 and 10.0 ng/L can be reached, as well as enhancement factor of 108 level. In addition, the good stability and repeatability of CS@Ag@ZIF-8 can be obtained in various conditions. The recognition probes based on 4-MPBA and DTNB modified CS@Ag@ZIF-8 were fabricated for rapid and selective detection of glucose and lactic acid in human sweat. The promising linearity in range of 0.1-100.0 μmol/L and 0.1-50.0 mmol/L with LOD of 0.04 μmol/L and 0.03 mmol/L for glucose and lactic acid were achieved, respectively. The detection errors between commercial meter and developed method was in range of -6.4 to 6.0 %. Our results provide a promising strategy in fabrication of portable SERS substrates with satisfied performance for rapid, selective and in-situ quantification of biomolecules in complex biological samples.

The LOD paradox: When lower isn't always better in biosensor research and development

Biosensor research has long focused on achieving the lowest possible Limits of Detection (LOD), driving significant advances in sensitivity and opening up new possibilities in analysis. However, this intense focus on low LODs may not always meet the practical needs or suit the actual uses of these devices. While technological improvements are impressive, they can sometimes overlook important factors such as detection range, ease of use, and market readiness, which are vital for biosensors to be effective in real-world applications. This review advocates for a balanced approach to biosensor development, emphasizing the need to align technological advancements with practical utility. We delve into various applications, including the detection of cancer biomarkers, pathology-related biomarkers, and illicit drugs, illustrating the critical role of LOD within these contexts. By considering clinical needs and broader design aspects like cost-effectiveness, sustainability, and regulatory compliance, we argue that integrating technical progress with practicality will enhance the impact of biosensors. Such an approach ensures that biosensors are not only technically sound but also widely useable and beneficial in real-world applications. Addressing the diverse analytical parameters alongside user expectations and market demands will likely maximize the real-world impact of biosensors.

Development and Biomedical Application of Non-Noble Metal Nanomaterials in SERS

Surface-enhanced Raman scattering (SERS) is vital in many fields because of its high sensitivity, fast response, and fingerprint effect. The surface-enhanced Raman mechanisms are generally electromagnetic enhancement (EM), which is mainly based on noble metals (Au, Ag, etc.), and chemical enhancement (CM). With more and more studies on CM mechanism in recent years, non-noble metal nanomaterial SERS substrates gradually became widely researched and applied due to their superior economy, stability, selectivity, and biocompatibility compared to noble metal. In addition, non-noble metal substrates also provide an ideal new platform for SERS technology to probe the mechanism of biomolecules. In this paper, we review the applications of non-noble metal nanomaterials in SERS detection for biomedical engineering in recent years. Firstly, we introduce the development of some more common non-noble metal SERS substrates and discuss their properties and enhancement mechanisms. Subsequently, we focus on the progress of the application of SERS detection of non-noble metal nanomaterials, such as analysis of biomarkers and the detection of some contaminants. Finally, we look forward to the future research process of non-noble metal substrate nanomaterials for biomedicine, which may draw more attention to the biosensor applications of non-noble metal nanomaterial-based SERS substrates.

Innovative and versatile surface-enhanced Raman spectroscopy-inspired approaches for viral detection leading to clinical applications: A review

The evolution of analytical techniques has opened the possibilities of accurate analyte detection through a straightforward method and short acquisition time, leading towards their applicability to identify medical conditions. Surface-enhanced Raman spectroscopy (SERS) has long been proven effective for rapid detection and relies on SERS spectra that are unique to each specific analyte. However, the complexity of viruses poses challenges to SERS and hinders further progress in its practical applications. The principle of SERS revolves around the interaction among substrate, analyte, and Raman laser, but most studies only emphasize the substrate, especially label-free methods, and the synergy among these factors is often ignored. Therefore, issues related to reproducibility and consistency of results, which are crucial for medical diagnosis and are the main highlights of this review, can be understood and largely addressed when considering these interactions. Viruses are composed of multiple surface components and can be detected by label-free SERS, but the presence of non-target molecules in clinical samples interferes with the detection process. Appropriate spectral data processing workflow also plays an important role in the interpretation of results. Furthermore, integrating machine learning into data processing can account for changes brought about by the presence of non-target molecules when analyzing spectral features to accurately group the data, for example, whether the sample corresponds to a positive or negative patient, and whether a virus variant or multiple viruses are present in the sample. Subsequently, advances in interdisciplinary fields can bring SERS closer to practical applications.

High-Performance Broadband Self-Driven Photodetector Based on MoS2/Cs2CuBr4 Heterojunction

Few-layer transition metal dichalcogenides and perovskites are both promising materials in high-performance optoelectronic devices. Here, we developed a self-driven photodetector by creating a heterojunction between few-layer MoS2 and lead-free perovskite Cs2CuBr4. The detector shows a unique property of very high sensitivity in a broad spectral range of 400 to 800 nm with response speed in a millisecond order. Current-voltage characteristics of the heterojunction device show rectifying behavior, in contrast to the ohmic behavior of the MoS2-based device. The rectifying behavior is attributed to the type II band alignment of the MoS2/Cs2CuBr4 heterojunction. The device shows a broadband (400 to 800 nm) photodetection with very high responsivity reaching up to 2.8 × 104 A/W and detectivity of 1.6 × 1011 Jones at a bias voltage of 3 V. The detector can also operate in self-bias mode with sufficient response. The photocurrent, photoresponsivity, detectivity, and external quantum efficiency of the device are found to be dependent on the illumination power density. The response time of the device is found to be ∼32 and ∼79 ms during the rise and fall of the photocurrent. The work proposes a MoS2/Cs2CuBr4 heterostructure to be a promising candidate for cost-effective, high-performance photodetector.

Ultrasensitive detection of zearalenone based on electrochemiluminescent immunoassay with Zr-MOF nanoplates and Au@MoS2 nanoflowers

In this work, an effective competitive-type electrochemiluminescence (ECL) immunosensor was constructed for zearalenone determination by using Zr-MOF nanoplates as the ECL luminophore and Au@MoS2 nanoflowers as the substrate material. Zr-MOF have an ultra-thin sheet-like structure that accelerates the transfer of electrons, ions and co-reactant intermediates, which exhibited strong and stable anodic luminescence. The three-dimensional Au@MoS2 nanoflowers would form a thin film modification layer on the glassy carbon electrode (GCE). And its good electrical conductivity and higher specific surface area utilization further improving the sensitivity of the ECL immunosensor. Under the optimized conditions, the proposed immunosensor exhibited satisfactory stability, sensitivity and accuracy, and its ECL signal was proportional to the logarithm of ZEN concentration (0.0001-100 ng/mL) and the limit of detection (LOD) was 0.034 pg/mL. In addition, the results of recovery experiment acquired for wheat flour and pig urine samples further proved the feasibility of the immunosensor for the detection of real samples, indicating its potential for ultrasensitive detection of ZEN.

Design superhydrophobic no-noble metal substrates for highly sensitive and signal stable SERS sensing

Surface-enhanced Raman spectroscopy (SERS) is an analytical technique with a broad range of potential applications in fields such as biomedicine, electrochemistry, and hazardous chemicals. However, it is challenging to develop SERS substrates that are both good sensitive and signal stable. Here we designed a superhydrophobic Nd doped MoS2 uniformly assembled on the activated carbon fiber cloth (CFC) to avoid the coffee ring effect and enrich the analyte, improving the enhancement factor (EF) to 3.9 × 109 and pesticide endosulfan (<10-10) analyte detection. We demonstrate our strategy by density-functional theory (DFT) calculations confirming that both adsorption energy and density of states are enhanced after doping Nd leading to SERS enhancement. Beside DFT calculations, our experiments also provide an effective means to demonstrate that the high SERS sensitivity is based on multiple charge transfer processes combined with the activated carbon cloth. Our results address the limitations of low sensitivity and limit of detection (LOD) of semiconductor SERS substrates for trace analysis and are a step towards practical applications.

Electrochemical peptide-based biosensor for the detection of the inflammatory disease biomarker, interleukin-1beta

This paper reports the development of a highly sensitive and selective electrochemical peptide-based biosensor for the detection of the inflammatory disease biomarker, interleukin-1beta (IL-1β). To this end, flower-like Au-Ag@MoS2-rGO nanocomposites were used as the signal amplification platform to achieve a label-free biosensor with a high sensitivity and selectivity. First, a high-affinity peptide for IL-1β was identified through biopanning with M13 random peptide libraries, and was newly designed by incorporating cysteine at the C-terminus. An IL-1β specific binding peptide was used as the bio-receptor, and the interaction between the IL-1β binding peptide and IL-1β was confirmed via enzyme-linked immunosorbent assay and various physicochemical and electrochemical analyses. Under optimal conditions, the biosensor achieved an ultrasensitive and specific IL-1β detection in a wide linear concentration range of 0-250 ng/mL with a picomolar-level detection limit (∼2.4 pM), low binding constant (∼0.62 pM), and a low coefficient of variation (<1.65 %). The biosensor was successfully utilized for IL-1β determination in the serum of Crohn's disease patients with a good correlation coefficient. In addition, the detection performance was comparable to that of commercially available IL-1β ELISA kit. This indicates that the electrochemical peptide-based biosensor may offer a potentially valuable platform for the clinical diagnosis of various inflammatory disease biomarkers.

Label-Free Detection of Unbound Bilirubin and Nitrophenol Explosives in Water by a Mechanosynthesized Dual Functional Zinc Complex: Recognition of Picric Acid in Various Common Organic Media

High levels of unconjugated bilirubin (UB) in serum lead to asymptomatic and neonatal jaundice and brain dysfunctions. Herein, we have reported the detection of UB at as low as 1 μM in an aqueous alkaline medium using a Zn(II) complex. The specificity of the complex has been validated by the HPLC in the concentration window 6-90 μM, which is rare. The sensory response of the probe at physiological pH against nitro explosives developed it as an instant-acting fluorosensor for picric acid (PA) and 2,4-dinitrophenol (2,4-DNP). Spectroscopic titration provided a binding constant of 4×105  M-1 with PA. The naked eye detection was found to be 15 μM. The solid-state photoluminescent nature of the complex enabled it for PA sensing in the solid phase. Interestingly, the probe remained fluorescent in various volatile and non-volatile organic solvents. As a result, it can also detect PA and 2,4-DNP in a wide range of common organic media. NMR studies revealed the coordination of PA, 2,4-DNP, and UB to the Zn(II) center of the probe, which is responsible for the observed quenching of the probe with the analytes.

Silver nanosheets self-assembled on polystyrene microspheres to form "hot spots" with different nanogap distances for high sensitive SERS detection

Herein, we reported a facile method to control the nanogap distance of silver (Ag) nanosheets to obtain high sensitive plasmonic Surface-enhanced Raman scattering (SERS) substrates. The sulfonated polystyrene (SPS) microspheres with different diameters were first fabricated using micro-emulsion synthesis, and then the SPS microspheres were coated with Ag nanosheets through chemical synthesis with citric acid/ascorbic acid to form Ag nanosheets@SPS (Ag@SPS) substrates with different nanogap distances. The results showed that the nanogap distance of Ag nanosheets self-assembled on SPS microspheres reduced from 80-150 nm to 28-68 nm when the diameter of SPS microspheres increased from 0.9 to 3.5 μm, and the enhancement factor (EF) increased from 105 to 107, the limit of detection of rhodamine 6G (R6G) for the Ag@SPS microspheres reduced from 10-10 to 10-13 mol/L. It confirmed that the Ag nanosheets coated on the surface of SPS microspheres could achieve ultra trace detection of analyte. Furthermore, the low concentration detection limit for melamine with the Ag@SPS microspheres substrate was about 10-8 mg/L, which is lower than the standard legislated by the European Union and the Food & Drug Administration. In addition, the SERS spectrum of 3-mercaptopropionic acid (3-MPA) could be also detected when its concentration was 10-8 mol/L. The prepared substrate offered a promising opportunity for SERS practical applications.

A review of nanomaterials for biosensing applications

A biosensor is a device that reacts with the analyte to be analyzed, detects its concentration, and generates readable information, which plays an important role in medical diagnosis, detection of physiological indicators, and disease prevention. Nanomaterials have received increasing attention in the fabrication and improvement of biosensors due to their unique physicochemical and optical properties. In this paper, the properties of nanomaterials such as the size effect, optical and electrical properties, and their advantages in the field of biosensing are briefly summarized, and the application of nanomaterials can effectively improve the sensitivity and reduce the detection limit of biosensors. The advantages of commonly used nanomaterials such as gold nanoparticles (AuNPs), carbon nanotubes (CNTs), quantum dots (QDs), graphene, and magnetic nanobeads for biosensor applications are also reviewed. Besides, the two main types of biosensors using nanomaterials involved in their construction and their working principles are described, and the toxicity and biocompatibility of nanomaterials and the future direction of nanomaterial biosensors are discussed.

Carbon dots@noble metal nanoparticle composites: research progress report

Carbon dots@noble metal nanoparticle composites are formed by combining carbon dots and metal nanoparticles using various strategies. Carbon dots exhibit a reducing ability and function as stabilisers; consequently, metal-ion solutions can be directly reduced by them to synthesise gold, silver, and gold-silver alloy particles. Carbon dots@gold/silver/gold-silver particle composites have demonstrated the potential for several practical applications owing to their superior properties and simple preparation process. Until now, several review articles have been published to summarise fluorescent carbon dots or noble metal nanomaterials. Compared with metal-free carbon dots, carbon dots@noble metal nanoparticles have a unique morphology and structure, resulting in new physicochemical properties, which allow for sensing, bioimaging, and bacteriostasis applications. Therefore, to promote the effective development of carbon dots@noble metal nanoparticle composites, this paper primarily reviews carbon dots@gold/silver/gold-silver alloy nanoparticle composites for the first time in terms of the following aspects. (1) The synthesis strategies of carbon dots@noble metal nanoparticle composites are outlined. The principle and function of carbon dots in the synthesis strategies are examined. The advantages and disadvantages of these methods and composites are analysed. (2) The characteristics and properties of such composites are described. (3) The applications of these composite materials are summarised. Finally, the potentials and limitations of carbon dots@noble metal nanoparticle composites are discussed, thus laying the foundation for their further development.

Resonance-Assisted Surface-Enhanced Raman Spectroscopy Amplification on Hierarchical Rose-Shaped MoS2/Au Nanocomposites

Surface-enhanced Raman spectroscopy (SERS) has emerged as a highly sensitive trace detection technique in recent decades, yet its exceptional performance remains elusive in semiconductor materials due to the intricate and ambiguous nature of the SERS mechanism. Herein, we have synthesized MoS2 nanoflowers (NFs) decorated with Au nanoparticles (NPs) by hydrothermal and redox methods to explore the size-dependence SERS effect. This strategy enhances the interactions between the substrate and molecules, resulting in exceptional uniformity and reproducibility. Compared to the unadorned Au nanoparticles (NPs), the decoration of Au NPs induces an n-type effect on MoS2, resulting in a significant enhancement of the SERS effect. This augmentation empowers MoS2 to achieve a low limit of detection concentration of 2.1 × 10-9 M for crystal violet (CV) molecules and the enhancement factor (EF) is about 8.52 × 106. The time-stability for a duration of 20 days was carried out, revealing that the Raman intensity of CV on the MoS2/Au-6 substrate only exhibited a reduction of 24.36% after undergoing aging for 20 days. The proposed mechanism for SERS primarily stems from the synergistic interplay among the resonance of CV molecules, local surface plasma resonance (LSPR) of Au NPs, and the dual-step charge transfer enhancement. This research offers comprehensive insights into SERS enhancement and provides guidance for the molecular design of highly sensitive SERS systems.

Ultrasensitive SERS-based detection of prostate cancer exosome using Cu2O-CuO@Ag composite nanowires

Exosome is a recently emerging cancer-associated biomarker for early diagnostic and prognostic owing to their noninvasive, intrinsic stability, and representativeness of primitive cell state. However, the development of convenient and quantitative methods for exosome analysis remains technically challenging. Here, we proposed a cost-effective assay for the direct capture and rapid monitoring of exosomes utilizing the multifunctional surface enhanced Raman scattering (SERS) substrate, which consisted of Cu2O-CuO nanowires prepared by a simple thermo-oxidative growth method and subsequently sputtered with Ag NPs. This reticulate substrate made up of interlaced one-dimensional nanowires that highly favored for exosome recognition and collection. Particularly, the electromagnetic hotspots with high density were uniformly distributed on the nanowires due to uniform physical deposition, facilitating robust SERS property with an enhancement factor (EF) of 3.3 × 108 and signal reproducibility with a relative standard deviation (RSD) of 13%. In addition, the presence of Cu2O-CuO heterojunction enabled further elevation of the SERS performance attributed to the effective charge transfer, triggering a significant chemical enhancement effect. Finally, clinical validation with the serum specimens of prostate cancer patients indicated that the proposed immunosensor possessed great potential for application in rapid cancer screening and diagnosis.

Ultrasensitive detection of crystal violet using a molybdenum sulfide-silver nanostructure-based sensing platform: roles of the adsorbing semiconductor in SERS signal enhancement

Crystal violet (CV) is an organic dye that is stabilized by the extensive resonance delocalization of electrons over three electron-donating amine groups. This prevents the molecule from being linked to a metal surface, and therefore, reduces the sensitivity of surface-enhanced Raman scattering (SERS) sensors for this toxic dye. In this work, we improved the sensing performance of a silver-based SERS sensor for CV detection by modifying the active substrate. Molybdenum sulfide (MoS2) nanosheets were employed as a scaffold for anchoring electrochemically synthesized silver nanoparticles (e-AgNPs) through a single step of ultrasonication, leading to the formation of MoS2/Ag nanocomposites. As an excellent adsorbent, MoS2 promoted the adsorption of CV onto the surface of the substrate, allowing more CV molecules to be able to experience the SERS effect originating from the e-AgNPs. Hence, the SERS signal of CV was significantly enhanced. In addition, the effects of the MoS2 content of the nanocomposites on their SERS performance were also taken into account. Using MoS2/Ag with the most optimal MoS2 content of 10%, the SERS sensor exhibited the best enhancement of the SERS signal of CV with an impressive detection limit of 1.17 × 10-11 M in standard water and 10-9 M in tap water thanks to an enhancement factor of 2.9 × 106, which was 11.2 times higher than that using pure e-AgNPs.

ReS2 Nanoflowers-Assisted Confined Growth of Gold Nanoparticles for Ultrasensitive and Reliable SERS Sensing

ReS₂, as a new member of transition metal dichalcogenides (TMDCs), has emerged as a promising substrate for semiconductor surface-enhanced Raman spectroscopy (SERS) due to its unique optoelectronic properties. Nevertheless, the sensitivity of the ReS₂ SERS substrate poses a significant challenge to its widespread application in trace detection. In this work, we present a reliable approach for constructing a novel ReS₂/AuNPs SERS composite substrate, enabling ultrasensitive detection of trace amounts of organic pesticides. We demonstrate that the porous structures of ReS₂ nanoflowers can effectively confine the growth of AuNPs. By precisely controlling the size and distribution of AuNPs, numerous efficient and densely packed "hot spots" were created on the surface of ReS₂ nanoflowers. As a result of the synergistic enhancement of the chemical and electromagnetic mechanisms, the ReS₂/AuNPs SERS substrate demonstrates high sensitivity, good reproducibility, and superior stability in detecting typical organic dyes such as rhodamine 6G and crystalline violet. The ReS₂/AuNPs SERS substrate shows an ultralow detection limit of 10^-10 M and a linear detection of organic pesticide molecules within 10^-6-10^-10 M, which is significantly lower than the EU Environmental Protection Agency regulation standards. The strategy of constructing ReS₂/AuNPs composites would contribute to the development of highly sensitive and reliable SERS sensing platforms for food safety monitoring.

Multi-dimensional plasmonic coupling system for efficient enrichment and ultrasensitive label-free SERS detection of bilirubin based on graphene oxide-Au nanostars and Au@Ag nanoparticles

Rapid and sensitive detection of free bilirubin (BR) is essential for early diagnosis of jaundice and other hepatobiliary diseases. Inspired by sandwich immunoassay strategy, a multi-dimensional plasmonic coupling SERS platform composed of graphene oxide-Au nanostars nanocomposites (GANS NCs) and Au@Ag nanoparticles (NPs) was designed for label-free detection of BR. Specifically, GANS NCs were first prepared, and their excellent SERS activity was ascribed to synergistic enhancement effect of electromagnetic enhancement and chemical enhancement. Furthermore, SERS spectroscopy was used to monitor the adsorption process of BR. Subsequently, secondary reinforcing Au@Ag NPs were directly added, ultimately resulting in a multi-dimensional plasmonic coupling effect. The SERS enhancing mechanism of coupled system was discussed through electromagnetic field simulations. Interestingly, the high-density hotspots generated by strong plasmonic coupling in GANS-Au@Ag substrate could lead to more extraordinary SERS enhancing behavior compared to GANS NCs. Sensing efficiency of the SERS platform was examined by BR with a detection limit down to 10^-11 M. Besides, GANS-Au@Ag NCs performed high uniformity and reproducibility. This work not only opens up a new avenue for construction of multi-dimensional plasmonic coupling system, but also offers a new biosensing technology for label-free diagnosis of BR-related diseases, thereby expecting to be applied in clinical diagnosis.

The convergence of traditional and digital biomarkers through AI-assisted biosensing: A new era in translational diagnostics?

Advances in consumer electronics, alongside the fields of microfluidics and nanotechnology have brought to the fore low-cost wearable/portable smart devices. Although numerous smart devices that track digital biomarkers have been successfully translated from bench-to-bedside, only a few follow the same fate when it comes to track traditional biomarkers. Current practices still involve laboratory-based tests, followed by blood collection, conducted in a clinical setting as they require trained personnel and specialized equipment. In fact, real-time, passive/active and robust sensing of physiological and behavioural data from patients that can feed artificial intelligence (AI)-based models can significantly improve decision-making, diagnosis and treatment at the point-of-procedure, by circumventing conventional methods of sampling, and in person investigation by expert pathologists, who are scarce in developing countries. This review brings together conventional and digital biomarker sensing through portable and autonomous miniaturized devices. We first summarise the technological advances in each field vs the current clinical practices and we conclude by merging the two worlds of traditional and digital biomarkers through AI/ML technologies to improve patient diagnosis and treatment. The fundamental role, limitations and prospects of AI in realizing this potential and enhancing the existing technologies to facilitate the development and clinical translation of "point-of-care" (POC) diagnostics is finally showcased.

Construction of a novel nano-enzyme for ultrasensitive glucose detection with surface-enhanced Raman scattering

Fabricating more sensitive, stable and low-cost nanomaterials for the detection of glucose is important for the disease diagnosis and monitoring. Herein, we established a nanocomposite (polypyrrole bridging GO@Au@MnO₂) as a novel surface-enhanced Raman scattering (SERS) nanoprobe for the quantitative detection of glucose in trace serum. Each component in the nanocomposites played an irreplaceable role in SERS detection of glucose. Polypyrrole (PPy) could act as Raman signal and extra SERS signal molecules didn't need to be introduced; Graphene oxide (GO) and gold nanoparticles (Au NPs) could enhance Raman signal of PPy; Au NPs also acted as glucose oxidase, which can oxidize glucose to produce gluconic acid and hydrogen peroxide(H₂O₂); Manganese oxide (MnO₂) further enhanced Raman signal of PPy and responded to hydrogen peroxide, which will induce the decrease of Raman intensity of PPy. Thus, glucose can be quantified according to Raman signal output of PPy, which displayed a liner range from 1 to 10 μM, with detectable limit of 0.114 μM. Because of the merits in sensitivity, convenience and versatility, the novel method shows large potential space for disease-related substance detection in the future.

Ni and O co-modified MoS2 as universal SERS substrate for the detection of different kinds of substances

Surface-enhanced Raman scattering (SERS) has attracted extensive attention as an ultrasensitive detection method. However, the poor biocompatibility and expensive synthesis cost of noble metal SERS substrates have become non-negligible factors that limit the development of SERS technology. Metal chalcogenide semiconductors as an alternative to noble metal SERS substrates can avoid these disadvantages, but the enhancement effect is lower than that of noble metal substrates. Here, we report a method to co-modify MoS₂ by Ni and O, which improves the carrier concentration and mobility of MoS₂. The SERS effect of the modified MoS₂ is comparable to that of noble metals. We found that the improved SERS performance of MoS₂ can be attributed to the following two factors: strong interfacial dipole-dipole interaction and efficient charge transfer effect. During the doping process, the incorporation of Ni and O enhances the polarity and carrier concentration of MoS₂, enhances the interfacial interaction of MoS₂, and provides a basis for charge transfer. During the annealing process, the introduction of O atoms into the S defects reduces the internal defects of doped MoS₂, improves the carrier mobility, and promotes the efficient charge transfer effect of MoS₂. The final modified MoS₂ as a SERS substrate realizes low-concentration detection of bilirubin, cytochrome C, and trichlorfon. This provides promising guidance for the practical inspection of metal chalcogenide semiconductor substrates.

Application of SERS in In-Vitro Biomedical Detection

Surface-enhanced Raman scattering (SERS), as a rapid and nondestructive biological detection method, holds great promise for clinical on spot and early diagnosis. In order to address the challenging demands of on spot detection of biomedical samples, a variety of strategies has been developed. These strategies include substrate structural and component engineering, data processing techniques, as well as combination with other analytical methods. This report summarizes the recent SERS developments for biomedical detection, and their promising applications in cancer detection, virus or bacterial infection detection, miscarriage spotting, neurological disease screening et al. The first part discusses the frequently used SERS substrate component and structures, the second part reports on the detection strategies for nucleic acids, proteins, bacteria, and virus, the third part summarizes their promising applications in clinical detection in a variety of illnesses, and the forth part reports on recent development of SERS in combination with other analytical techniques. The special merits, challenges, and perspectives are discussed in both introduction and conclusion sections.

Engineered Two-Dimensional Nanostructures as SERS Substrates for Biomolecule Sensing: A Review

Two-dimensional nanostructures (2DNS) attract tremendous interest and have emerged as potential materials for a variety of applications, including biomolecule sensing, due to their high surface-to-volume ratio, tuneable optical and electronic properties. Advancements in the engineering of 2DNS and associated technologies have opened up new opportunities. Surface-enhanced Raman scattering (SERS) is a rapid, highly sensitive, non-destructive analytical technique with exceptional signal amplification potential. Several structurally and chemically engineered 2DNS with added advantages (e.g., π-π* interaction), over plasmonic SERS substrates, have been developed specifically towards biomolecule sensing in a complex matrix, such as biological fluids. This review focuses on the recent developments of 2DNS-SERS substrates for biomolecule sensor applications. The recent advancements in engineered 2DNS, particularly for SERS substrates, have been systematically surveyed. In SERS substrates, 2DNS are used as either a standalone signal enhancer or as support for the dispersion of plasmonic nanostructures. The current challenges and future opportunities in this synergetic combination have also been discussed. Given the prospects in the design and preparation of newer 2DNS, this review can give a critical view on the current status, challenges and opportunities to extrapolate their applications in biomolecule detection.

Painless and sensitive pepsinogen I detection: an electrochemical immunosensor based on rhombic dodecahedral Cu3Pt and MoS2 NFs

Gastric cancer (GC) is a common malignant tumour of the digestive tract with a high mortality rate worldwide. However, many patients delay treatment due to the avoidance of the costly and painful procedure of gastroscopy. Therefore, an early convenient screening method is essential to improve the survival rate of GC patients. To address this issue, we constructed an electrochemical immunosensor supported by rhombohedral Cu3Pt and MoS2 nanoflowers (MoS2 NFs) for rapid, painless and quantitative detection of the GC biomarker in vitro. Here, pepsinogen I was employed as a model protein biomarker to analyse the performance of the immunosensor. The rhombohedral dodecahedral Cu3Pt nanoparticles decorated with MoS2-NFs were further functionalized; this allowed the constructed sensor to possess more nano- or micro-structures, thereby improving the detection sensitivity. In specific applications, the corresponding bioactive molecules can be flexibly captured. Under optimal conditions, the immunoassay showed a wide linear range from 500 pg mL-1 to 400 ng mL-1 and a low detection limit of 167 pg mL-1 (S/N = 3). This covers the critical value of 70 ng mL-1, and the results obtained from the analysis of human serum samples were on par with those from the enzyme immunoassay, suggesting significant potential for this new method in daily diagnosis.

Using Blue Mini-LEDs as a Light Source Designed a Miniaturized Optomechanical Device for the Detection of Direct Bilirubin

This study developed a miniaturized optomechanical device (MOD) for the feasibility study of direct bilirubin in urine using high-collimation blue mini-light-emitting diodes (Mini-LEDs) as the light source. The constructed MOD used optical spectroscopy to analyze different concentrations of direct bilirubin using the absorbance spectrum to achieve a noninvasive method for detection. The experimental results showed that between the absorbance and different concentrations of direct bilirubin at the blue Mini-LEDs central wavelength (462 nm) was the optimum fitting wavelength; in the direct bilirubin concentration range from 0.855 to 17.1 μmol/L, the coefficient of determination (R²) was 0.9999, the limit of detection (LOD) of 0.171 μmol/L, and the limit of quantitation (LOQ) of 0.570 μmol/L. Therefore, we propose using blue Mini-LEDs as a light source to design a MOD to replace the invasive blood sampling method with a spectroscopic detection of direct bilirubin concentration corresponding to absorbance.

Ultrasensitive Sandwich-Type SERS-Biosensor-Based Dual Plasmonic Superstructure for Detection of Tacrolimus in Patients

Tacrolimus (FK506) is widely used in the prevention of organ transplant rejection and the treatment of autoimmune diseases, but it is difficult to detect within the low and narrow concentration range in practical clinical fields. A magnetic plasmonic superstructure-targets-plasmonic superstructure-based sandwich-type SERS biosensor is presented here to ultrasensitively detect FK506 in the blood of organ transplant patients. The spiky Fe₃O₄@SiO₂@Ag flower magnetic superstructure and hollow Ag@Au superstructure enhanced the SERS signals by providing rich sharp tips, cavities, and abundant hot spot gaps. And the magnetic feature makes it easy to concentrate and separate the biological target. Using the designed sandwich-type SERS biosensor, FK506 could be detected within a range of 0.5-20 ng/mL with a detection limit of 0.33 ng/mL. All results indicated that the sandwich-type SERS biosensor has good stability, sensitivity, and anti-interference properties. It is noteworthy that this allowed us to successfully analyze FK506 in the blood of transplant patients, which is in strong agreement with the clinical results. Consequently, the attractive sandwich-type SERS biosensor can be used for the detection of FK506 in real samples, which is promising for clinical diagnosis.

Facile Synthesis of Biocarbon-Based MoS2 Composite for High-Performance Supercapacitor Application

Nanocomposites are gaining high demand for the development of next-generation energy storage devices because of their eco-friendly and cost-effective natures. However, their short-term energy retainability and marginal stability are regarded as hindrances to overcome. In this work, we demonstrate a high-performance supercapacitor fabricated by biocarbon-based MoS₂ (Bio-C/MoS₂) nanoparticles synthesized by a facile hydrothermal approach using date fruits. Here, we report the high specific capacitance for a carbon-based nanocomposite employing the pyrolysis technique of converting agricultural biowaste into a highly affordable energy resource. The biocompatible Bio-C/MoS₂ nanospheres exhibited a high capacitance of 945 F g^-1 at a current density of 0.5 A g^-1 and an excellent reproducing stability of 92% after 10000 charge/discharge cycles. In addition, the Bio-C/MoS₂ NS showed an exceptional power density of 3800-8000 W kg^-1 and an energy density of 74.9-157 Wh kg^-1. The results would pave a new strategy for design of eco-friendly materials toward the high-performance energy storage technology.

Optimization of surface enhanced Raman scattering performance based on Ag nanoparticle-modified vanadium-titanium nanorods with tunable nanogaps

The combination of new noble metal nanomaterials and surface enhanced Raman scattering (SERS) technology has become a new strategy to solve the problem of low sensitivity in the detection of traditional Chinese medicine. In this work, taking natural cicada wing (C.w.) as a template, by optimizing the magnetron sputtering experimental parameters for the growth of Ag nanoparticles (NPs) on vanadium-titanium (V-Ti) nanorods, the nanogaps between the nanorods were effectively regulated and the Raman signal intensity of the Ag₁₅/V-Ti₂₀/C.w. substrate was improved. The proposed homogeneous nanostructure exhibited high SERS activity through the synergistic effect of the electromagnetic enhancement mechanism at the nanogaps between the Ag NPs modified V-Ti nanorods. The analytical enhancement factor (AEF) value was as high as 1.819 × 10⁸, and the limit of detection (LOD) was 1 × 10^-11 M for R6G. The large-scale distribution of regular electromagnetic enhancement "hot spots" ensured the good reproducibility with the relative standard deviation (RSD) value less than 7.31%. More importantly, the active compound of Artemisinin corresponded the pharmacological effect of Artemisia annua was screened out by SERS technology, and achieved a LOD of 0.01 mg/l. This reliable preparation technology was practically applicable to produce SERS-active substrates in detection of pharmacodynamic substance in traditional Chinese medicine.

Superparamagnetic MoS2@Fe3O4 nanoflowers for rapid resonance-Raman scattering biodetection

Sensors for rapid and reliable detection of biomolecules are crucial for clinical medical diagnoses. Here, a rapid, ultra-sensitive, magnetic-assisted biosensor based on resonance Raman scattering at MoS2@Fe3O4 composite nanoflowers is presented. Raman shifts and X-ray photoelectron spectra indicated that the composite was formed via Fe-S covalent bonds. Convenient magnetic separations could be performed because of the superparamagnetic Fe3O4 nanoparticles. MoS2 E12g and A1g Raman peaks were used as probe signals for anti-interference immunoassays. The probe unit of the immunoassay also included goat anti-human IgG molecules that were used as the target analyte. Au substrates coupled with the goat anti-human IgG were used as capture units to form sandwich biosensors. Because of the magnetic enrichment, the detection limit was improved by three orders-of-magnitude and the detection time was reduced from 1.5 h to 1 min. Sandwich biosensors using MoS2@Fe3O4 nanoflowers as Raman probes could be very promising sensors for proteins, antigens, and other immunogenic biopolymers, as well as for corpuscular viruses and cells.

Spontaneous formation of gold nanoparticles on MoS2 nanosheets and its impact on solution-processed optoelectronic devices

Understanding size-dependent properties of 2D materials is crucial for their optimized performance when incorporated through solution routes. In this work, the chemical nature of MoS₂ as a function of nanosheet size is investigated through the spontaneous reduction of chloroauric acid. Microscopy studies suggest higher gold nanoparticle decoration density in smaller nanosheet sizes, resulting from higher extent of reduction. Further corroboration through surface-enhanced Raman scattering using the gold-decorated MoS₂ nanosheets as substrates exhibited an enhancement factor of 1.55 × 10⁶ for smaller nanosheets which is 7-fold higher as compared to larger nanosheets. These plasmonic-semiconductor hybrids are utilized for photodetection, where decoration is found to impact the photoresponse of smaller nanosheets the most, and is optimized to achieve responsivity of 367.5 mAW^-1 and response times of ∼17 ms. The simplistic modification via solution routes and its impact on optoelectronic properties provides an enabling platform for 2D materials-based applications.

•

Reducing agent-free Au nanoparticle decoration on aqueously dispersed 2H-MoS₂.

•

Control on Au nanoparticle decoration density through nanosheet size-selection.

•

SERS as a probe for determining the decoration density along with microscopy.

•

Enhanced photodetection by spontaneous modification with Au on MoS₂ films.

Advanced Metal-Organic Frameworks-Based Catalysts in Electrochemical Sensors

Developing efficient catalysts is vital for the application of electrochemical sensors. Metal-organic frameworks (MOFs), with high porosity, large specific surface area, good conductivity, and biocompatibility, have been widely used in catalysis, adsorption, separation, and energy storage applications. In this invited review, the recent advances of a novel MOF-based catalysts in electrochemical sensors are summarized. Based on the structure-activity-performance relationship of MOF-based catalysts, their mechanism as electrochemical sensor, including metal cations, synthetic ligands, and structure, are introduced. Then, the MOF-based composites are successively divided into metal-based, carbon-based, and other MOF-based composites. Furthermore, their application in environmental monitoring, food safety control, and clinical diagnosis is discussed. The perspective and challenges for advanced MOF-based composites are proposed at the end of this contribution.

MoS2-Based Substrates for Surface-Enhanced Raman Scattering: Fundamentals, Progress and Perspective

Surface-enhanced Raman scattering (SERS), as an important tool for interface research, occupies a place in the field of molecular detection and analysis due to its extremely high detection sensitivity and fingerprint characteristics. Substantial efforts have been put into the improvement of the enhancement factor (EF) by way of modifying SERS substrates. Recently, MoS2 has emerged as one of the most promising substrates for SERS, which is also exploited as a complementary platform on the conventional metal SERS substrates to optimize the properties. In this minireview, the fundamentals of MoS2-related SERS are first explicated. Then, the synthesis, advances and applications of MoS2-based substrates are illustrated with special emphasis on their practical applications in food safety, biomedical sensing and environmental monitoring, together with the corresponding challenges. This review is expected to arouse broad interest in nonplasmonic MoS2-related materials along with their mechanisms, and to promote the development of SERS studies.

Fabricating BiOI nanostructures armed catalytic strips for selective electrochemical and SERS detection of pesticide in polluted water

We have constructed a dual mode catalytic strip equipped with 2D BiOI nanostructures and deployed for dual mode detection sensing of hazardous trichlorophenol (TCP). Synthesized BiOI nanostructures are investigated for its crystal architecture, morphology and chemical composition. The BiOI are loaded onto the catalytic strips with the assistance of gravity offered drying process. The BiOI nanostructures offers a very less charge transfer resistance indicating its superior catalytic properties upon the electrochemical impedance studies. It reflected on providing an excellent limit of detection (LOD) and linear sensing range for TCP in electrochemical mode. For SERS, a thin plasmonic Au layer is sputter coated on BiOI equipped catalytic strips (Au@BiOI) for the TCP detection. An impressive enhancement factor of 10⁷ is obtained for SERS detection of TCP with good LOD of 10^-10 M. Fabricated dual mode BiOI based strips are thoroughly examined for operational stability and performance in real time conditions. The fabricated high performance dual mode platform for the detection of hazardous pesticides appears to be a promising prospect for the on-the-spot investigation.

A Visible Light Driven Photoelectrochemical Chloramphenicol Aptasensor Based on a Gold Nanoparticle-Functionalized 3D Flower-like MoS2/TiO2 Heterostructure

Developing a photoactive material by combining the characteristics of a wide light response range and effective separation of photogenerated electron-hole pairs remains a huge challenge for the construction of a photoelectrochemical (PEC) sensing platform. Herein, a gold nanoparticle (AuNP)/MoS₂/TiO₂ composite was prepared through the facile hydrothermal method coupled with an in situ photoreduction technology. Benefiting from both the compositional and structure merits, the composite not only extends the absorption range to visible light but also enhances the photoelectric conversion efficiency by transferring photogenerated electrons into the conduction band of semiconductors from the plasmonic AuNP. Meanwhile, the thiolated aptamers were attached to the surface of AuNP/MoS₂/TiO₂ composites through the Au-S bonding to construct a visible light driven PEC aptasensor for ultrasensitive detection chloramphenicol (CAP). In the presence of CAP, the aptamers anchored on the surface of the photoactive materials could specifically recognize CAP and interact with it to form a bioaffinity complex with a steric hindrance effect, resulting in the rapid decrease of photocurrent responses. Based on this photocurrent suppression strategy, the constructed PEC aptasensing platform exhibited a high sensitivity with a wide linear range from 5 pM to 100 nM and a low detection limit of 0.5 pM.

Raman, Infrared and Brillouin Spectroscopies of Biofluids for Medical Diagnostics and for Detection of Biomarkers

This review surveys Infrared, Raman/SERS and Brillouin spectroscopies for medical diagnostics and detection of biomarkers in biofluids, that include urine, blood, saliva and other biofluids. These optical sensing techniques are non-contact, noninvasive and relatively rapid, accurate, label-free and affordable. However, those techniques still have to overcome some challenges to be widely adopted in routine clinical diagnostics. This review summarizes and provides insights on recent advancements in research within the field of vibrational spectroscopy for medical diagnostics and its use in detection of many health conditions such as kidney injury, cancers, cardiovascular and infectious diseases. The six comprehensive tables in the review and four tables in supplementary information summarize a few dozen experimental papers in terms of such analytical parameters as limit of detection, range, diagnostic sensitivity and specificity, and other figures of merits. Critical comparison between SERS and FTIR methods of analysis reveals that on average the reported sensitivity for biomarkers in biofluids for SERS vs FTIR is about 103 to 105 times higher, since LOD SERS are lower than LOD FTIR by about this factor. High sensitivity gives SERS an edge in detection of many biomarkers present in biofluids at low concentration (nM and sub nM), which can be particularly advantageous for example in early diagnostics of cancer or viral infections.HighlightsRaman, Infrared spectroscopies use low volume of biofluidic samples, little sample preparation, fast time of analysis and relatively inexpensive instrumentation.Applications of SERS may be a bit more complicated than applications of FTIR (e.g., limited shelf life for nanoparticles and substrates, etc.), but this can be generously compensated by much higher (by several order of magnitude) sensitivity in comparison to FTIR.High sensitivity makes SERS a noninvasive analytical method of choice for detection, quantification and diagnostics of many health conditions, metabolites, and drugs, particularly in diagnostics of cancer, including diagnostics of its early stages.FTIR, particularly ATR-FTIR can be a method of choice for efficient sensing of many biomarkers, present in urine, blood and other biofluids at sufficiently high concentrations (mM and even a few µM)Brillouin scattering spectroscopy detecting visco-elastic properties of probed liquid medium, may also find application in clinical analysis of some biofluids, such as cerebrospinal fluid and urine.

Simultaneous detection of dual biomarkers using hierarchical MoS2 nanostructuring and nano-signal amplification-based electrochemical aptasensor toward accurate diagnosis of prostate cancer

Accurate and reliable quantification of tumor biomarkers in clinical samples is of vital importance for early stage diagnosis and treatment of cancer. However, a poor specificity of prostate specific antigen (PSA) testing alone fostering overdetection and overtreatment, remains a great controversy in prostate cancer (PCa) screening. Here we report an electrochemical aptasensor using hierarchical MoS₂ nanostructuring and SiO₂ nano-signal amplification for simultaneous detection of dual PCa biomarkers, PSA and sarcosine, to enhance the diagnostic performance of PCa. In this strategy, hierarchical flower-like MoS₂ nanostructures as functional interface accelerated intermolecular accessibility and improved DNA hybridization efficiency. Moreover, the spherical SiO₂ nanoprobe that conjugated with both electroactive tags and DNA probes, allowed effective electrochemical signal amplification. By deliberately designing different hybridization modes, we individually implemented the optimization of PSA and sarcosine sensing system. Based on this, simultaneous determination of PSA and sarcosine was achieved, with limit of detection (LOD) down to 2.5 fg/mL and 14.4 fg/mL, respectively, as well as excellent selectivity. More importantly, using this approach, we could directly differentiate cancer patients with healthy ones for clinical serum samples. The ultrasensitive biosensor provides single-step analysis with simple operation and a small sample volume (∼12 μL), shedding new light on accurate diagnosis and early-detection of cancer in clinical applications.

Synthesis, Characterization, and Supercapacitor Performance of a Mixed-Phase Mn-Doped MoS2 Nanoflower

The fascinating features of 2D nanomaterials for various applications have prompted increasing research into single and few-layer metal dichalcogenides nanosheets using improved nanofabrication and characterization techniques. MoS2 has recently been intensively examined among layered metal dichalcogenides and other diverse transition metal-based materials, that have previously been studied in various applications. In this research, we report mixed-phase Mn-doped MoS2 nanoflowers for supercapacitor performance studies. The confirmation of the successfully prepared Mn-doped MoS2 nanoflowers was characterized by XRD, SEM-EDS, RAMAN, and BET research techniques. The mixed-phase of the as-synthesized electrode material was confirmed by the structural changes observed in the XRD and RAMAN studies. The surface area from the BET measurement was calculated to be 46.0628 m2/g, and the adsorption average pore size of the electrode material was 11.26607 nm. The electrochemical performance of the Mn-doped MoS2 electrode material showed a pseudo-capacitive behavior, with a specific capacitance of 70.37 Fg−1, and with a corresponding energy density of 3.14 Whkg−1 and a power density of 4346.35 Wkg−1. The performance of this metal-doped MoS2-based supercapacitor device can be attributed to its mixed phase, which requires further optimization in future works.

The Challenges of Developing Biosensors for Clinical Assessment: A Review

Emerging research in biosensors has attracted much attention worldwide, particularly in response to the recent pandemic outbreak of coronavirus disease 2019 (COVID-19). Nevertheless, initiating research in biosensing applied to the diagnosis of diseases is still challenging for researchers, be it in the preferences of biosensor platforms, selection of biomarkers, detection strategies, or other aspects (e.g., cutoff values) to fulfill the clinical purpose. There are two sides to the development of a diagnostic tool: the biosensor development side and the clinical side. From the development side, the research engineers seek the typical characteristics of a biosensor: sensitivity, selectivity, linearity, stability, and reproducibility. On the other side are the physicians that expect a diagnostic tool that provides fast acquisition of patient information to obtain an early diagnosis or an efficient patient stratification, which consequently allows for making assertive and efficient clinical decisions. The development of diagnostic devices always involves assay developer researchers working as pivots to bridge both sides whose role is to find detection strategies suitable to the clinical needs by understanding (1) the intended use of the technology and its basic principle and (2) the preferable type of test: qualitative or quantitative, sample matrix challenges, biomarker(s) threshold (cutoff value), and if the system requires a mono- or multiplex assay format. This review highlights the challenges for the development of biosensors for clinical assessment and its broad application in multidisciplinary fields. This review paper highlights the following biosensor technologies: magnetoresistive (MR)-based, transistor-based, quartz crystal microbalance (QCM), and optical-based biosensors. Its working mechanisms are discussed with their pros and cons. The article also gives an overview of the most critical parameters that are optimized by developing a diagnostic tool.

Fluorescent sensing of free bilirubin at nanomolar level using a Langmuir-Blodgett film of glucuronic acid-functionalized gold nanoclusters

Serum bilirubin is an important indicator to assess liver function and diagnose various types of liver diseases. The level of serum bilirubin is also negatively correlated with the risk of cardiovascular disease and cancer. We had fabricated a fluorescent film sensor aiming at free bilirubin detection at the nanomolar level. Gold nanoclusters capped by human serum albumin (HSA-AuNCs) were utilized as a fluorescent platform for bilirubin biorecognition. HSA-AuNCs were functionalized with glucuronic acid to increase the binding sites for bilirubin. An ultrathin film of glucuronic acid-functionalized gold nanoclusters was obtained by the Langmuir-Blodgett (LB) technique. When exposed to bilirubin, the interaction between free bilirubin and the functionalized AuNCs resulted in fluorescent quenching of the film. Good linearity could be achieved for the quenching efficiency versus the logarithm of free bilirubin concentration over a concentration range of 1.00 nM~5.00 μM. The limit of detection (LOD) was calculated to be (2.70 ± 0.14) × 10^-1 nM (S/N = 3). The film sensor presents a good anti-interference capability towards common substances coexisting with bilirubin in serum. Satisfactory results achieved in the tests of real serum samples indicate that the LB film sensor can be used for bilirubin determination in nanomolar concentration.

Noble metal modified ReS2 nanocavity for surface-enhanced Raman spectroscopy (SERS) analysis

The rhenium disulphide (ReS₂) nanocavity-based surface enhanced Raman scattering (SERS) substrates ware fabricated on the gold-modified silicon pyramid (PSi) by thermal evaporation technology and hydrothermal method. In this work, the ReS₂ nanocavity was firstly combined with metal nanostructures in order to improve the SERS properties of ReS₂ materials, and the SERS response of the composite structure exhibits excellent performance in sensitivity, uniformity and repeatability. Numerical simulation reveals the synergistic effect of the ReS₂ nanocavity and the plasmon resonance generated by the metal nanostructures. And the charge transfer between the metal, ReS₂ and the analytes was also verified and plays an non-ignorable role. Besides, the plasmon-driven reaction for p-nitrothiophenol (PNTP) to p,p'-dimercaptobenzene (DMAB) conversion was successfully in-situ monitored. Most importantly, it is found for the first time that the SERS properties of ReS₂ nanocavity-based substrates are strongly temperature dependent, and the SERS effect achieves the best performance at 45 °C. In addition, the low concentration detection of malachite green (MG) and crystal violet (CV) molecules in lake water shows its development potential in practical application.

In-situ surface-enhanced Raman scattering based on MTi20 nanoflowers: Monitoring and degradation of contaminants

Real-time and in-situ monitoring of chemical reactions has attracted great attention in many fields. In this work, we in-situ monitored the photodegradation reaction process of methylene blue (MB) by Surface enhanced Raman scattering (SERS) technique. An effective and versatile SERS platform assembled from MoS₂ nanoflowers (NFs) and TiO₂ nanoparticles (NPs) was prepared successfully. The optimized MoS₂/TiO₂ substrate (MTi₂₀) exhibits not only an ultra-high SERS response but also the excellent catalytic degradation performance to the contaminant MB, which provided a new material for real-time and in-situ monitoring the photodegradation process. Experiments prove that the detection limit is as low as 10^-13 M, and degradation rate is as high as 97.2% in 180 s, respectively. And the activity of the substrate kept in the air for 90 days is almost unchanged. Furthermore, as a practical SERS substrate, MTi₂₀ can also detect trace amounts of other harmful substances including malachite green (MG), bisphenol A (BPA) and endosulfan. Thus, this study come up with a new orientation at the real-time and in-situ monitoring of photocatalytic reaction and may be applied in environmental monitoring and food security fields in the future.

A cyclodextrin-decorated plasmonic gold nanosatellite substrate for selective detection of bipyridylium pesticides

A cyclodextrin-decorated gold nanosatellite (AuNSL) substrate was developed as a surface-enhanced Raman scattering sensor for the selective sensing of bipyridylium pesticides such as paraquat (PQ), diquat (DQ), and difenzoquat (DIF). The AuNSL structure was fabricated via vacuum deposition of gold nanoparticles (AuNPs) on a gold nanopillar substrate, and a large density of hot-spots was formed for Raman signal enhancement. Thiolated β-cyclodextrin (SH-CD) was surface-modified on the AuNSL as a chemical receptor. The detection limit of PQ, DQ, and DIF on the SH-CD-coated AuNSL (CD-AuNSL) was 0.05 ppm for each, and showed linear correlation in a concentration range of 10 ppm-0.05 ppm. Then, selective bipyridylium pesticide detection was performed by comparing the Raman intensity of each pesticide with and without the washing step. After the washing step, 90% of the PQ, DQ, and DIF Raman signals were maintained on the CD-AuNSL substrate with a uniform selectivity in a mapping area of 200 μm × 200 μm. Furthermore, selective pesticide detection was performed using a ground-apple solution without pretreatment. Raman signals were clearly observed after the washing step and they showed a limit of detection down to a concentration of 0.05 ppm for each pesticide. Principal component analysis (PCA) of the binary and ternary mixtures of PQ, DQ, and DIF showed that each component could be easily identified via the typical Raman fingerprint analysis. The developed CD-AuNSL is expected to be applied for various chemical sensors, especially for pyridine-containing toxic substances in the environment and metabolite biomarkers in biofluids.

Tip-to-tip assembly of urchin-like Au nanostar at water-oil interface for surface-enhanced Raman spectroscopy detection

Au Nanostar (NS) monolayer as a surface enhanced Raman scattering (SERS) substrate has been synthesized by self-assembly at a water-oil interface. It is confirmed from the experiment and simulation results that the Au NS monolayer includes lots of "hot spots" at or between the tips of the Au NSs, enhancing the local electromagnetic fields and giving rise to strong SERS signals sequentially. The limit of detection is determined to be down to 4.2 × 10^-12 M for rhodamine 6G. Furthermore, the Au NS monolayer can detect multiple molecules, including thiabendazole, methylene blue, 4-mercaptobenzoic acid, and p-amino thiophenol, indicating that the SERS substrate composed of Au NS monolayer has potential applications in analytical chemistry, food safety, and environmental safety.