Organic molecular passivation of phosphorene: An aptamer-based biosensing platform

MoS2 nanosheets supported on anodic aluminum oxide membrane: An effective interface for label-free electrochemical detection of microRNA

The interesting adsorption affinity of two-dimensional nanosheets to single stranded over double stranded nucleic acids have stimulated the exploration of these materials in biosensing. Herein, MoS₂ nanosheets decorated anodic aluminum oxide (AAO) membrane was simply prepared by suction filtration. The MoS₂/AAO hybrid membrane was initially applied to the electrochemical detection of microRNA using let-7a as the model. When let-7a was incubated with its complementary DNA, double stranded DNA-RNA formed and which displayed weak adsorption capability to the hybrid membrane. And thus the steric effect combining the electrostatic repulsion of the backbone phosphate of nucleic acids for [Fe(CN)₆]^3- transport across the hybrid membrane varied with the concentration of let-7a. In this way, a label-free electrochemical detection method for microRNA was established by monitoring the change of the redox current of [Fe(CN)₆]^3-. To further improve the detection sensitivity of the method, we proposed two separate strategies focusing on the amplification of the target-induced steric hindrance with DNA nanostructure and the magnification of the electrode sensitivity for [Fe(CN)₆]^3- by electrode modification. By using the two strategies, the hybrid membrane based-detection method exhibited broad linear range, low detection limit and good selectivity as well as reproducibility. Therefore, this study provided a proof-of-concept for the application of two-dimensional material to nucleic acids detection.

Ultrasensitive Electrochemical Aptasensing of Malathion Based on Hydroxylated Black Phosphorus/Poly-L-Lysine Composite

A highly sensitive unlabeled electrochemical aptasensor based on hydroxylated black phosphorus/poly-L-lysine (hBP/PLL) composite is introduced herein for the detection of malathion. Poly-L-lysine (PLL) with adhesion and coating properties adhere to the surface of the nanosheets by noncovalent interactions with underlying hydroxylated black phosphorus nanosheets (hBP) to produce the hBP/PLL composite. The as-synthesized hBP/PLL composite bonded to Au nanoparticles (Au NPs) firmly by assembling and using them as a substrate for the aptamer with high specificity as a probe to fabricate the sensor. Under optimal conditions, the linear range of the electrochemical aptasensor was 0.1 pM~1 μM, and the detection limit was 2.805 fM. The electrochemical aptasensor has great selectivity, a low detection limit, and anti-interference, which has potential application prospects in the field of rapid trace detection of pesticide residues.

Advancements in nanomaterial-based aptasensors for the detection of emerging organic pollutants in environmental and biological samples

The combination of nanomaterials (NMs) and aptamers into aptasensors enables highly specific and sensitive detection of diverse pollutants. The great potential of aptasensors is recognized for the detection of diverse emerging organic pollutants (EOPs) in different environmental and biological matrices. In addition to high sensitivity and selectivity, NM-based aptasensors have many other advantages such as portability, miniaturization, facile use, and affordability. This work showcases the recent advances achieved in the design and fabrication of NM-based aptasensors for monitoring EOPs (e.g., hormones, phenolic contaminants, pesticides, and pharmaceuticals). On the basis of their sensing mechanisms, the covered aptasensing systems are classified as electrochemical, colorimetric, PEC, fluorescence, SERS, and ECL. Special attention has been paid to the fabrication processes, analytical achievements, and sensing mechanisms of NM-based aptasensors. Further, the practical utility of aptasensing approaches has also been assessed based on their basic performance metrics (e.g., detection limits, sensing ranges, and response times).

Tuning the magnetoresistance properties of phosphorene with periodic magnetic modulation

Periodic superlattices constitute ideal structures to modulate the transport properties of two-dimensional materials. In this paper, we show that the tunneling magnetoresistance (TMR) in phosphorene can be tuned effectively through periodic magnetic modulation. Deltaic magnetic barriers are arranged periodically along the phosphorene armchair direction in parallel (PM) and anti-parallel magnetization (AM) fashion. The theoretical treatment is based on a low-energy effective Hamiltonian, the transfer matrix method and the Landauer-Büttiker formalism. We find that the periodic modulation gives rise to oscillating transport characteristics for both PM and AM configurations. More importantly, by adjusting the electrostatic potential appropriately we find Fermi energy regions for which the AM conductance is reduced significantly while the PM conductance keeps considerable values, resulting in an effective TMR that increases with the magnetic field strength. These findings could be useful in the design of magnetoresistive devices based on magnetic phosphorene superlattices.

Amplification of fluorescence polarization signal based on specific recognition of aptamers combined with quantum quenching effect for ultrasensitive and simple detection of PCB-77

Here, we report a novel aptasensor based on decahedral silver nanoparticles (Ag₁₀NPs) enhanced fluorescence polarization (FP) for detecting PCB-77. Using aptamer modified Ag₁₀NPs hybridized with DNA sequence labeled fluorescent group as an analytical probe, polychlorinated biphenyls (PCB-77) could be detected with high sensitivity and selectivity. The linear range of determination was 0.02 ng/L to 390 ng/L and the limit of detection was 5 pg/L. In addition, through the optimization of the experiment condition and signal probe DNA (pDNA), we found that the maximum FP signal could be generated when the distance between fluorescein and the surface of Ag₁₀NPs was 3 nm. When the aptamer was immobilized on the surface of Ag₁₀NPs could be strengthened the anti-interference performance of aptamer nanoprobe and further improved the detection ability. At the same time, we also compared the detection performance of the traditional FP signal enhancer streptavidin (SA) analysis system. The fluorescence polarization aptasensor could detect PCB-77 samples efficiently in complex environmental water, which shows a good application prospect.

Two-Dimensional Black Phosphorus: Preparation, Passivation and Lithium-Ion Battery Applications

As a new type of single element direct-bandgap semiconductor, black phosphorus (BP) shows many excellent characteristics due to its unique two-dimensional (2D) structure, which has great potential in the fields of optoelectronics, biology, sensing, information, and so on. In recent years, a series of physical and chemical methods have been developed to modify the surface of 2D BP to inhibit its contact with water and oxygen and improve the stability and physical properties of 2D BP. By doping and coating other materials, the stability of BP applied in the anode of a lithium-ion battery was improved. In this work, the preparation, passivation, and lithium-ion battery applications of two-dimensional black phosphorus are summarized and reviewed. Firstly, a variety of BP preparation methods are summarized. Secondly, starting from the environmental instability of BP, different passivation technologies are compared. Thirdly, the applications of BP in energy storage are introduced, especially the application of BP-based materials in lithium-ion batteries. Finally, based on preparation, surface functionalization, and lithium-ion battery of 2D BP, the current research status and possible future development direction are put forward.

An aggregation-induced emission immunoassay for broad detection of polychlorinated biphenyls in chicken and crab

Polychlorinated biphenyls (PCBs) are persistent organic pollutants (POPs) with multiple variants, which may be harmful to human health by absorption and bioaccumulation. To ensure food safety, it is necessary to develop multi-residue immunoassays for broad recognition of PCBs. In this study, by mimicking the generic core structure of PCBs, three haptens have been designed and synthesized for monoclonal antibody (mAb) generation. A carboxylic acid derivative of PCB80 was a hapten that induced a mAb with broad recognition of PCBs. The results of ELISA further identified that the mAb could recognize 11 different kinds of PCBs; half-maximal inhibition concentrations (IC₅₀) ranged from 33.12 to 476.42 ng/mL. Subsequently, using aggregation-induced emission luminogen (AIEgen) nanobeads as the tracer for the output signal, the IC₅₀ value of the various PCBs was improved to 6.38-252.1 ng/mL. The limit of detection (LOD) varied from 0.32 to 42.15 ng/mL. Recoveries of 76.90-95.74% and intra-assay coefficients of variation of 8.5-14.4% were obtained with spiked chicken and crab meat samples. Matrix interference was eliminated by dilution, and no false-positive and false-negative results were observed. The developed assay provides a simple, broad-spectrum, and sensitive tool for detecting PCBs, with high-throughput possibilities for large-scale screening of PCBs in food.

Visual Test Paper for on-Site Polychlorinated Biphenyls Detection and Its Logic Gate Applications

A visual detection method was proposed for polychlorinated biphenyls (PCBs) detection using lateral flow test paper as the sensing platform. The aptamer sequence was used to recognize the target 3,3',4,4'-tetrachlorobiphenyl (PCB77). The integration of Zn²⁺-dependent DNAzyme with toehold-mediated strand displacement reaction significantly improved the response signals. Gold nanoparticles were utilized as the signal tracers in the test paper, making the results visible directly by the naked eye. Under optimal conditions, the paper enables the visual detection of PCB77 as low as 10 pM without additional instrumentation. The assay displays a high selectivity for PCB77 against potential interfering molecules. The visual test paper is robust and has been applied to the detection of PCB77 in milk samples with good recovery and satisfactory accuracy. Using two different PCBs (PCB77 and PCB72) as inputs, we further fabricated OR and AND logic gates, which is conducive to the development of an intelligent detection strategy for PCBs monitoring. Given the attractive characteristics of disposability, low cost, logic operation, and intuitive output, the test paper shows great promise for on-site screening of PCBs in resource-limited areas.

Ultrasensitive detection of PCB77 based on Exonuclease III-powered DNA walking machine

In view of the urgent need to determine polychlorinated biphenyls (PCBs) in the environment, we report a simple and sensitive electrochemical aptasensor to detect 3,3',4,4'-tetrachlorobiphenyl (PCB77) based on Exonuclease III-powered Deoxyribonucleic Acid (DNA) walking machine using poly (diallyldimethylammonium chloride) (PDDA), which was functionalized hollow porous graphitic carbon nitride/ Ni-Co hollow nanoboxes/ Au-Pd-Pt nanoflowers composite material. Upon the addition of PCB77, the specific binding between PCB77 and the aptamer (Apt) could trigger the Exo III-assisted cyclic amplification process and release unlocking probes to deblock the Swing arm/Blocker duplex. Finally, the hybridized hairpin 3 (HP3), a short oligonucleotide, was left on the electrode via Exo III digestion of hybridized HP2, and thus a strong methylene blue (MB) signal was obtained. As expected, the proposed aptasensor exhibits exceptional PCB77 detection performances with a very low detection limit of 5.13 pg/L and a wide linear range of 0.01-100 ng/L based on the calibration curve. Moreover, the aptasensor presents a high level of selectivity and stability, with an acceptable degree of reproducibility. The results of this study have indicated that the proposed aptasensor has great potential application prospects, as demonstrated by its successful use in real environmental water samples.

Recent advances in black phosphorus-based electrochemical sensors: A review

Since the discovery of liquid-phase-exfoliated black phosphorus (BP) as a field-effect transistor in 2014, BP, with its 2D layered structure, has attracted significant attention, owing to its anisotropic electroconductivity, tunable direct bandgap, extraordinary surface activity, moderate switching ratio, high hole mobility, good biocompatibility, and biodegradability. Several pioneering research efforts have explored the application of BP in different types of electrochemical sensors. This review summarizes the latest synthesis methods, protection strategies, and electrochemical sensing applications of BP and its derivatives. The typical synthesis methods for BP-based crystals, nanosheets, and quantum dots are discussed in detail; the degradation of BP under ambient conditions is introduced; and state-of-the-art protection methodologies for enhancing BP stability are explored. Various electrochemical sensing applications, including chemically modified electrodes, electrochemiluminescence sensors, enzyme electrodes, electrochemical aptasensors, electrochemical immunosensors, and ion-selective electrodes are discussed in detail, along with the mechanisms of BP functionalization, sensing strategies, and sensing properties. Finally, the major challenges in this field are outlined and future research avenues for BP-based electrochemical sensors are highlighted.

An ultrasensitive platform for PCB77 detection: New strategy for liquid crystal-based aptasensor fabrication

Polychlorinated biphenyls (PCBs) are considered persistent bio-accumulative toxicants which threats global food safety and environmental health. Traditional analytical techniques for detection of PCBs are time-consuming and they do not satisfy urgent need for rapid and accurate monitoring of these persistent pollutants. Biosensor technology may be promising in this respect. Here we demonstrate a novel liquid crystal (LC)-based aptasensing platform as a promising label-free and rapid biosensor for PCB77 detection. This novel molecular strategy utilize triple-helix molecular conformational switch which is mediated formation of duplex on sensing platform in presence of target. Duplex forming leads to optical change from dark to bright in a liquid crystal based aptasensor. The limit of quantification of the LC-aptasensor to PCB77 is 1.5 × 10^-5 μg/L with comparable selectivity. Besides, we also demonstrated that this system is able to detect PCB77 in tap water, environmental water and milk. This strategy has potential for label-free and portable detection of different targets without any aptamer sequence length restrictions.

Two-dimensional materials in biomedical, biosensing and sensing applications

Two-dimensional (2D) materials are at the forefront of materials research. Here we overview their applications beyond graphene, such as transition metal dichalcogenides, monoelemental Xenes (including phosphorene and bismuthene), carbon nitrides, boron nitrides along with transition metal carbides and nitrides (MXenes). We discuss their usage in various biomedical and environmental monitoring applications, from biosensors to therapeutic treatment agents, their toxicity and their utility in chemical sensing. We highlight how a specific chemical, physical and optical property of 2D materials can influence the performance of bio/sensing, improve drug delivery and photo/thermal therapy as well as affect their toxicity. Such properties are determined by crystal phases electrical conductivity, degree of exfoliation, surface functionalization, strong photoluminescence, strong optical absorption in the near-infrared range and high photothermal conversion efficiency. This review conveys the great future of all the families of 2D materials, especially with the expanding 2D materials' landscape as new materials emerge such as germanene and silicene.

An electrochemical aptasensor-based CoxP-decorated porous carbon microspheres and AuNRs labelled methylene blue as signal labels for the sensitive detection of PCB77

In this work, a simple, specific and ultra-sensitive electrochemical aptasensor was successfully developed based on a novel signal reduction strategy for the detection of polychlorinated biphenyls (PCB77). This aptasensor was prepared by the electrodeposition of gold nanoparticles (AuNPs) on an Au electrode (AuE) modified with cobalt phosphide (Co_xP, a mixture of CoP and Co₂P) decorated porous carbon microspheres. In this study, the thiolated single-complementary DNA (cDNA) was immobilized on the surface of the modified electrode via the Au-S bond. Subsequently, the gold nanorod@methylene blue connection aptamer (AuNRs@MB-Apt) signal labels were immobilized onto the modified electrode through the principle of complementary base pairing. Further, the aptamer preferentially binds to PCB77, decreasing the amount of AuNR@MB-Apt. The DPV current response was related to the PCB77 concentration. Under the optimized experimental conditions, a low detection limit of 5.9 × 10^-2 ng L^-1 and a wide linear range of 1 × 10^-11 mg mL^-1 to 1 × 10^-4 mg mL^-1 (S/N = 3) for PCB77 were achieved. Moreover, the proposed aptasensor offered high selectivity, stability and reproducibility, indicating the broad potential application in environmental monitoring.

A reagentless electrochemical sensor for aflatoxin B1 with sensitive signal-on responses using aptamer with methylene blue label at specific internal thymine

Aptamer electrochemical sensors using immobilized aptamers with redox tag rely on the target binding-induced changes of current signal on electrode, offering advantages in operation convenience, no separation, rapidity, and sensitivity. Usually, the redox tag is placed on aptamer terminal, however, sometimes the terminal label may be insensitive to target-binding and fail to generate sensitive responses. The redox tag methylene blue (MB) labeled on different sites of aptamer may experience distinct changes in local environment, distance to electrode, or interactions with aptamer bases during affinity binding, which affect the current signal. Thus, it is possible to construct aptamer electrochemical sensors with sensitive and significant responses to targets by screening a series of sites (e.g., internal thymine T) of the aptamer and placing MB tag on a specific site of the aptamer. With this strategy, we successfully fabricated an electrochemical sensor on gold electrode for rapid, reagentless, and sensitive detection of aflatoxin B1 (AFB1), an important mycotoxin causing great health risks, by using a 26-mer DNA aptamer with MB on an internal T site (e.g., 18th T) and a thiol moiety at 5' terminal. This sensor generated remarkable signal-on responses to AFB1, allowed a detection limit of 6 pM, and enabled detection of AFB1 in wine, milk and corn flour samples. This sensor can be well regenerated by rinsing with deionized water and reused, and shows good stability. This sensor and the demonstrated strategy are promising in wide applications.

Two-Dimensional Black Phosphorus: An Emerging Anode Material for Lithium-Ion Batteries

Two-dimensional black phosphorus (2D BP), an emerging material, has aroused tremendous interest once discovered. This is due to the fact that it integrates unprecedented properties of other 2D materials, such as tunable bandgap structures, outstanding electrochemical properties, anisotropic mechanical, thermodynamic, and photoelectric properties, making it of great research value in many fields. The emergence of 2D BP has greatly promoted the development of electrochemical energy storage devices, especially lithium-ion batteries. However, in the application of 2D BP, there are still some problems to be solved urgently, such as the difficulty in the synthesis of large-scale high-quality phosphorene, poor environmental stability, and the volume expansion as electrode materials. Herein, according to the latest research progress of 2D BP in the field of energy storage, we systematically summarize and compare the preparation methods of phosphorene and discuss the basic structure and properties of BP, especially the environmental instability and passivation techniques. In particular, the practical application and challenges of 2D BP as anode material for lithium-ion batteries are analyzed in detail. Finally, some personal perspectives on the future development and challenges of BP are presented.

Chemistry of Phosphorene: Synthesis, Functionalization and Biomedical Applications in an Update Review

The present review aims to highlight the potential of an emerging 2D single element material: phosphorene. Attention is focused on the more recent studies on phosphorene, in terms of synthetic approaches, modification aimed at its stabilization, and potential applications in the biomedical field. Critical aspects for a practical use of phosphorene are discussed, in order to show a realistic scenario and challenges facing researchers.

Label-free and highly selective electrochemical aptasensor for detection of PCBs based on nickel hexacyanoferrate nanoparticles/reduced graphene oxides hybrids

In consideration of the urgent need to determine polychlorinated biphenyls (PCBs) in the environment, a label-free and highly selective electrochemical aptasensor was constructed for determining PCBs based on nickel hexacyanoferrate nanoparticles (NiHCF NPs)/reduced graphene oxides (rGO) hybrids. NiHCF NPs/rGO hybrids with small size of about 5 nm NiHCF NPs were synthesized for the first time by in situ co-deposition of NiHCF NPs on rGO surface. In the hybrids, rGO with large area and good conductivity can supply more space for loading NiHCF NPs and improve the conductivity of the hybrids. NiHCF NPs that can be used to be act as a signal probe exhibit a couple of well-defined peaks with highly reversible redox ability and good stability. Here, PCB77 as a model molecule, the anti-PCB77 aptamer was anchored on the NiHCF NPs/rGO hybrids by covalent bonding reaction. The design aptasensor for detecting PCB77 exhibits a favorable linear response from 1.0 to 100.0 ng/L with a low detection limit of 0.22 ng/L. Meanwhile, it displays good selectivity for PCB77 detection due to the specificity and high affinity of aptamer to PCB77. Additionally, the application of the aptasensor was evaluated in real environmental samples.

Recent progress in the development of recognition bioelements for polychlorinated biphenyls detection: Antibodies and aptamers

Polychlorinated biphenyls (PCBs) are persistent pollutants, which have expanded in foods and the environment. Detection of PCBs is considered essential due to recognized side-effects of PCBs on health and the public concerns in this regard. On the other hand, due to the trace levels of these organic chlorine compounds, reliable and sensitive assays must be developed. Recognition elements are essential parts of analytical detection assays and sensors of PCBs since these elements are involved in the selective identification of the analytes of interest. Understanding the fundamentals of the recognition elements of PCBs and the benefits of the sensor strategies result in the development of next-generation recognition devices. This review aimed to highlight the recent progress in the recognition elements as key parts of biosensors. We initially, focused on the developed antibody-based biosensors for the detection of PCBs, followed by discussing the aptamers as novel recognition elements. Furthermore, the recent advancement in the development of aptamer-based solid phase extractions has been evaluated. These findings could contribute to improving the design of commercial PCB-kits in the future.