Rolling circle extension-actuated loop-mediated isothermal amplification (RCA-LAMP) for ultrasensitive detection of microRNAs

Click chemical ligation-enabled digital particle counting for multiplexed microRNA analysis

Digital counting assays, that quantify targets by counting individual signal entities, provide a promising way for the sensitive analysis of biomarkers even at the single-molecule level. Considering the requirements of complex enzyme-catalyzed amplification techniques and specialized instruments in traditional digital counting biosensors, herein, a simple digital counting platform for microRNA (miRNA) analysis is developed by employing the miRNA-templated click chemical ligation to hinge ultrabright quantum dot-doped nanoparticles (QDNPs) on the bottom of microplate well. Compared with the traditional short miRNA-mediated sandwich hybridization mechanism, the click chemistry-mediated ligation featured enhanced stability, achieving higher sensitivity by directly counting the number of QDNPs with a common wide-field fluorescence microscope. Furthermore, enzyme-free cycling click ligation strategy is adopted to push the detection limit of miRNA down to a low level of 8 fM. What is more, taking advantages of the tunable emission wavelength and narrow emission spectra of fluorescent nanoparticles, the platform enables simultaneous detection of multiplex miRNA targets without cross interference. Benefiting from the simple operation, high sensitivity, and good generality, miRNA analysis in complex samples is successfully achieved. This method not only pioneers a new route for digital counting assays but also holds great potential in miRNA-related biological researches.

Catalytic hairpin assembly-based AIEgen/graphene oxide nanocomposite for fluorescence-enhanced and high-precision spatiotemporal imaging of microRNA in living cells

The low abundance, heterogeneous expression, and temporal changes of miRNA in different cellular locations pose significant challenges for both the detection sensitivity of miRNA liquid biopsy and intracellular imaging. In this work, we report an intelligently assembled biosensor based on catalytic hairpin assembly (CHA) and aggregation-induced emission (AIE), named as catalytic hairpin aggregation-induced emission (CHAIE), for the ultrasensitive detection and intracellular imaging of miRNA-155. To achieve such goal, tetraphenylethylene-N3 (TPE-N3) is used as AIE luminogen (AIEgen), while graphene oxide is introduced to quench the fluorescence. When the target miRNA is present, CHA reaction is triggered, causing the AIEgen to self-assemble with the hairpin DNA. This will restrict the intramolecular rotation of the AIEgen and produce a strong AIE fluorescence. Interestingly, CHAIE does not require any enzyme or expensive thermal cycling equipment, and therefore provides a rapid detection. Under optimal conditions, the proposed biosensor can determine miRNA in the concentration range from 2 pM to 200 nM within 30 min, with the detection limit of 0.42 pM. The proposed CHAIE biosensor in this work offers a low background signal and high sensitivity, making it applicable for highly precise spatiotemporal imaging of target miRNA in living cells.

Fluorescence biosensor to detect microRNAs via integrating DNA hairpins transition mediated strand displacement amplification with primer exchange reaction

Herein, we constructed a fluorescence biosensor for the ultra-sensitive analysis of microRNAs (miRNAs) by combining DNA hairpins transition triggered strand displacement amplification (DHT-SDA) with primer exchange reaction (PER). Target miRNA initiated DHT-SDA to facilitate the generation of multiple single-stranded DNA (ssDNA) as PER primer, which was extended into a long ssDNA. The biosensor is successfully utilized in detecting miRNAs with high sensitivity (limit of detection for miRNA-21 was 58 fM) and a good linear relationship between 100 nM and 100 fM. By simply changing the DNA hairpin sequence, the constructed biosensor can be extended to analyze another miRNAs. Moreover, the biosensor has the feasibility of detecting miRNAs in real samples with satisfactory accuracy and reliability. Therefore, the fluorescent biosensor has great application potential in clinical diagnosis.

Parasite-derived microRNA let-7-5p detection for metacestodiasis based on rolling circular amplification-assisted CRISPR/Cas9

Metacestodiasis is an infectious disease caused by the larval stage of cestode parasites. This disease poses a serious health hazard to wildlife, livestock, and humans, and it incurs substantial economic losses by impacting the safety of the livestock industry, the quality of meat production, and public health security. Unfortunately, there is currently no available molecular diagnostic method capable of distinguishing cysticercus- and Echinococcus-derived microRNAs (miRNAs) from other helminthes and hosts in the plasma of metacestode-infected animals. This study aims to develop a specific, sensitive, and cost-efficient molecular diagnostic method for cysticercosis and echinococcosis, particularly for early detection. The study developed a rolling circular amplification (RCA)-assisted CRISPR/Cas9 detection method based on parasite-derived miRNA let-7-5p. Using a series of dilutions of the let-7 standard, the limit of detection (LOD) of the qPCR, RCA, and RCA-assisted CRISPR/Cas9 methods was compared. The specificity of qPCR and CRISPR/Cas9 was evaluated using four artificially synthesized let-7 standards from different species. A total of 151 plasma samples were used to evaluate the diagnostic performance. Additionally, the study also assessed the correlation between plasma levels of let-7-5p, the number of Taenia pisiformis cysticerci, and the weight of Echinococcus multilocularis cysts. The results demonstrated that the RCA-assisted CRISPR/Cas9 assay could significantly distinguish let-7 from cestodes and other species, achieving a LOD of 10 aM; the diagnostic sensitivity and specificity for rabbit cysticercosis and mouse E. multilocularis were 100% and 97.67%, and 100% and 100%, respectively. Notably, let-7-5p gradually increased in the plasma of T. pisiformis-infected rabbits from 15 days post infection (dpi), peaked at 60 dpi, and persisted until 120 dpi. In E. multilocularis-infected mice, let-7-5p gradually increased from 15 dpi and persisted until 90 dpi. Furthermore, the expression of let-7-5p positively correlated with the number of cysticerci and cyst weight. These results indicated that the let-7-5p-based RCA-assisted CRISPR/Cas9 assay is a sensitive and specific detection method that can be used as a universal diagnostic method for metacestodiasis, particularly for early diagnosis (15 dpi).

A supersensitive electrochemical sensor based on RCA amplification-assisted "silver chain"-linked gold interdigital electrodes and CRISPR/Cas9 for the detection of Staphylococcus aureus in food

With the rising emphasis on food safety, technology to rapidly identify Staphylococcus aureus (S. aureus) is of great significance. Herein, we developed a novel electrochemical biosensor based on the CRISPR/Cas9 system and rolling circle amplification (RCA)-assisted "silver chain"-linked gold interdigital electrodes (Au-IDE). This sensor utilizes RCA to create DNA long chains that span the Au-IDE, and CRISPR/Cas9 as a recognition component to recognize capture/target dsDNA. Additionally, we used silver staining technology to improve detection sensitivity. Then, we detected S. aureus through impedance changes that occurred when the silver chain between the Au-IDE was connected or broke, with a limit of detection (LOD) of 7 CFU/mL and a detection time of 1.5 h. Lastly, we successfully employed this sensor to detect S. aureus in real food samples, making it a promising tool for food monitoring.

Interface-constrained catalytic hairpin assembly permits highly sensitive SERS signaling of miRNA

The rapid and precise monitoring of peripheral blood miRNA levels holds paramount importance for disease diagnosis and treatment monitoring. In this study, we propose an innovative research strategy that combines the catalytic hairpin assembly reaction with SERS signal congregation and enhancement. This combination can significantly enhance the stability of SERS detection, enabling stable and efficient detection of miRNA. Specifically, our paper-based SERS detection platform incorporates a streptavidin-modified substrate, biotin-labeled catalytic hairpin assembly reaction probes, 4-ATP, and primer-co-modified gold nanoparticles. In the presence of miRNA, the 4-ATP and primer-co-modified gold nanoparticles can specifically recognize the miRNA and interact with the biotin-labeled CHA probes to initiate an interfacial catalytic hairpin assembly reaction. This enzyme-free high-efficiency catalytic process can accumulate a large amount of biotin on the gold nanoparticles, which then bind to the streptavidin on the substrate with the assistance of the driving liquid, forming red gold nanoparticle stripes. These provide a multitude of hotspots for SERS, enabling enhanced signal detection. This innovative design achieves a low detection limit of 3.47 fM while maintaining excellent stability and repeatability. This conceptually innovative detection platform offers new technological possibilities and solutions for clinical miRNA detection.

Amplification- and Enzyme-Free Magnetic Diagnostics Circuit for Whole-Genome Detection of SARS-CoV-2 RNA

Polymerase chain reaction (PCR) requires thermal cycling and enzymatic reactions for sequence amplification, hampering their applications in point-of-care (POC) settings. Magnetic bioassays based on magnetic particle spectroscopy (MPS) and magnetic nanoparticles (MNPs) are isothermal, wash-free, and can be quantitative. Realizing them amplification- and enzyme-free on a benchtop device, they will become irreplaceable for POC applications. Here we demonstrate a first-in-class magnetic signal amplification circuit (MAC) that enables detection of whole genome of SARS-CoV-2 by combining the specificity of toehold-mediated DNA strand displacement with the magnetic response of MNPs to declustering processes. Using MAC, we detect the N gene of SARS-CoV-2 samples at a concentration of 104 RNA copies/μl as determined by droplet digital PCR. Further, we demonstrate that MAC can reliably distinguish between SARS-CoV-2 and other human coronaviruses. Being a wash-, amplification- and enzyme-free biosensing concept and working at isothermal conditions (25 °C) on a low-cost benchtop MPS device, our MAC biosensing concept offers several indispensable features for translating nucleic acid detection to POC applications.

Recent Advances in Electrochemiluminescence Biosensors for MicroRNA Detection

Electrochemiluminescence (ECL) as an analytical technology with a perfect combination of electrochemistry and spectroscopy has received considerable attention in bioanalysis due to its high sensitivity and broad dynamic range. Given the selectivity of bio-recognition elements and the high sensitivity of the ECL analysis technique, ECL biosensors are powerful platforms for the sensitive detection of biomarkers, achieving the accurate prognosis and diagnosis of diseases. MicroRNAs (miRNAs) are crucial biomarkers involved in a variety of physiological and pathological processes, whose aberrant expression is often related to serious diseases, especially cancers. ECL biosensors can fulfill the highly sensitive and selective requirements for accurate miRNA detection, prompting this review. The ECL mechanisms are initially introduced and subsequently categorize the ECL biosensors for miRNA detection in terms of the quenching agents. Furthermore, the work highlights the signal amplification strategies for enhancing ECL signal to improve the sensitivity of miRNA detection and finally concludes by looking at the challenges and opportunities in ECL biosensors for miRNA detection.

Amplification-Free Analysis of Bladder Cancer MicroRNAs on Wrinkled Silica Nanoparticles with DNA-Functionalized Quantum Dots

Bladder cancer (BC) occurrence and progression are accompanied by alterations in microRNAs (miRNAs) expression levels. Simultaneous detection of multiple miRNAs contributes to the accuracy and reliability of the BC diagnosis. In this work, wrinkled silica nanoparticles (WSNs) were applied as the microreactor for multiplex miRNAs analysis without enzymes or nucleic acid amplification. Conjugated on the surface of WSNs, the S9.6 antibody was adopted as the universal module for binding DNA/miRNA duplexes, regardless of their sequence. Furthermore, single-stranded DNA (ssDNA) was labeled with quantum dots (QDs) for identifying a given miRNA to form QDs-ssDNA/miRNA, which enabled the specific capture of the corresponding QDs on the wrinkled surface of WSNs. Based on the detection of fluorescence signals that were ultimately focused on WSNs, target miRNAs could be sensitively identified to a femtomolar level (5 fM) with a wide dynamic range of up to 6 orders of magnitude. The proposed strategy achieved high specificity to obviously distinguish single-base mutation sequences and possessed multiplex assay capability. Moreover, the assay exhibited excellent practicability in the multiplex detection of miRNAs in clinical serum specimens.

Programmable DNA barcode-encoded exponential amplification reaction for the multiplex detection of miRNAs

Multiple analysis of miRNAs is essential for the early diagnosis and monitoring of diseases. Here, a programmable, multiplex, and sensitive approach was developed for one-pot detection of miRNAs by melting temperature encoded sequences and exponential isothermal amplification (E-EXPAR). In the presence of target miRNAs, the corresponding templates initiate the cycles of nicking and polymerization/displacement, generating numerous barcode strands with unique encoding sequences. Subsequently, generated barcode strands hybridize with fluorescent probes and quench the fluorophore by a triplet of G base through a photo-induced electron transfer mechanism. Finally, a melting curve analysis is performed to quantify miRNAs by calculating the rate of fluorescence change at the corresponding melting temperature. Based on this, miRNA-21, miRNA-9, and miRNA-122 were detected with the detection limits of 3.3 fM, 2.9 fM, and 1.7 fM, respectively. This E-EXPAR was also employed to simultaneously detect three miRNAs in biological samples, showing consistent results with RT-qPCR. Overall, this study provides a programmable and universal platform for multiplex analysis of miRNAs, and holds great promise as an alternative to the multiplex analysis in clinical diagnostics and prognostics for nucleic acid detection.

Integrated phase separation in microliter droplets for ultratrace-enriching biomarker analysis

Ultratrace-enriching biomarker analysis is an effective method for achieving highly accurate and enhanced sensitive detection. In this study, we have developed an enrichment detection platform by combining a minipillar array with an aqueous two-phase system (ATPS) for ultratrace enriching biomarker analysis. After optimizing the enrichment conditions of ATPS, target miRNAs at ultratrace levels specifically accumulate in the DEX-rich phase, which significantly increases the target miRNA concentration-related fluorescence intensity. Compared to non-enriched miRNA in the single-phase PEG solution, the detection limit of ATPS-enriched miRNA had improved more than 200-fold. The ATPS-based enrichment detection strategy offers a novel and convenient approach for the simultaneous detection of biomarkers with ultratrace.

Catalytic Assembly of DNAzyme Integrates with Primer Exchange Reaction (CDiPER) for Highly Sensitive Detection of MicroRNA

MicroRNAs (miRNAs) have significant regulatory functions in the modulation of gene expression, making them essential biomarkers for the diagnosis and prognosis of diseases. Nevertheless, the identification of miRNA poses significant difficulty in terms of its low abundance, necessitating sensitive and reliable approaches. Herein, we develop a simple approach, termed Catalytic assembly of DNAzyme integrates with Primer Exchange Reaction (CDiPER), for reliable and sensitive miRNA detection through the target recognition-triggered DNAzyme assembly and primer exchange reaction (PER) strategy. In this method, target miRNA can precisely bind with a specifically designed hairpin probe (H probe) to induce the conformation changes of the H probe, releasing DNAzyme sections to activate the PER process for signal amplification and fluorescence signal production. The established method displays a high dynamic range of over 6 orders of magnitude and a low detection limit of 312 aM. The created method has a number of unique advantages, such as (i) a better sensitivity than existing systems using PER for signal amplification as a result of its integration with the target recognition-triggered DNAzyme assembly and (ii) streamlined operating procedures. Further, the technology was used to detect the expression of miRNA in collected clinical samples from diabetes mellitus patients, revealing that miRNA was decreased in patients and demonstrating the significant clinical promise of the method.

FADH2-mediated radical polymerization amplification for microRNA-21 detection

For early diagnosis of disease, ultrasensitive mircoRNA-21 detection has considerable potential. In this paper, an ultra-sensitive fluorescence detection method for microRNA was developed by atom transfer radical polymerization (ATRP). This ATRP reaction was first initiated by using flavin mononucleotide (FADH2). The DNA probe 1 modified with amino group was fixed on the magnetic nanoparticle Fe3O4, and microRNA-21 was added to form the probe 1-microRNA-21. Another carboxy-modified DNA 2 forms a sandwich structure with the bound microRNA-21. Two terminally modified DNA types are used as microRNA probes, using complementary base pairing to form a stable super-sandwich structure between the DNA probe and the microRNA. Under optimal conditions, microRNA was detected in PBS buffer with a detection limit of 0.19 fM. And even in 10% of human serum, microRNA-21 can be detected with a detection limit of 47.8 fM. Results show that this method has high selectivity, efficiency and stability, which broad application prospect in microRNA ultra-sensitive detection.

Robust noncovalent spherical nucleic acid enzymes (SNAzymes) for ultrasensitive unamplified electrochemiluminescence detection of endogenous myocardial MicroRNAs

Here we develop robust noncovalent spherical nucleic acid enzymes (SNAzymes) for direct electrochemiluminescence (ECL) detection of acute myocardial infarction (AMI) related endogenous microRNAs in both circulating blood and cardiomyocytes, which circumvents the need for time-consuming signal amplification widely used in previous counterparts. It mainly relies on the super peroxidase-like activity of the designed noncovalent SNAzymes, promoted by a few nucleotides flanking on the 3'-terminals of common parallel G-quadruplexes (G4). For this reason, an unmodified G4 with an A5T30 head is well chosen and then attached robustly onto bare AuNPs via microwave-assisted heating-drying. A probe strand is meanwhile attached onto SNAzymes, enabling the target microRNA-triggered formation of a Y-shaped junction together with a capture strand tethered to a DNA tetrahedron on the electrode surface. The utilization of this tetrahedral nanoscaffold favors the ECL readout and thereby contributes to high sensitivity of the sensing platform. In this way, an AMI-related microRNA, miR-499, can be probed in a wide linear range, with a detection limit of 33 aM and high selectivity over other analogues. Furthermore, our developed sensing platform is employed to analyze endogenous miR-499 in AMI patients' blood, revealing an apparently higher level than the mean value of the healthy. What it means to patients, heart injury, is elucidated by comparing the miR-499 levels of cardiomyocytes and other tissue cells, with endogenous miR-16 as an intrinsic reference.

Simultaneous and rapid colorimetric detection of distinct miRNAs using Split-LAMP

Introduction: Aberrant microRNA (miRNA) expressions are often discovered in many life threatening diseases such as cancer. In particular, recent studies show combinations of miRNA levels have greater diagnostic accuracy as opposed to single miRNA levels. For point-of-care applications, rapid and sensitive isothermal amplification with loop-mediated isothermal amplification (LAMP) has gained significant interest. Method: We developed a cost-effective point-of-care testing (POCT) device for multiple miRNAs that can integrate miRNA signals into a single output. Results and Discussion: We demonstrate that the loop primers for LAMP can be broken and be used for miRNA detection. This split-LAMP approach provides a logic AND-gate output for two distinct miRNA inputs. We then show that this is potentially useable in point-of-care testing using pH-sensitive dye to give a rapid, colorimetric endpoint readout within 30 min. This novel logic gate approach can potentially be extended to multiple miRNAs such that there can be a powerful diagnostic concept for multiple short RNAs in a point-of-care rapid test.

Amplification-free microRNA profiling with femtomolar sensitivity on a plasmonic enhanced fluorescence nano-chip

MicroRNAs (miRNAs) are a class of small, non-coding RNA molecules involved in the regulation of gene expression, thus considered as promising biomarkers for cancer, cardiovascular diseases, neurodegenerative diseases, etc. However, quantitative analysis of miRNAs faces challenges owing to their high homology, small size & ultra-low abundance, and disease occurrence is often related to abnormal expression of multiple miRNAs where method for parallel miRNAs analysis is required. In this work, multiplexed analysis of miRNAs was established on a plasmonic nano-chip capable of fluorescence enhancement in the near-infrared region. Combined with polyadenylation at the hydroxyl terminate of target miRNA to afford abundant sites for fluorophore labeling, our assay achieved amplification-free detection of miRNAs from nM to fM with the limit of detection down to ca. 5 fM. A miRNA panel was constructed to detect 10 miRNAs differentially expressed in MCF-7 and A549 cell lines and validated with qRT-PCR, demonstrating the practical application of this method. This scalable platform can be customized for different miRNA panels, facilitating multiple miRNA profiling for various diseases.

Proximity ligation initiated DNAzyme-powered catalytic hairpin assembly for sensitive and accurate microRNA analysis

MicroRNAs (miRNAs) play a significant role in regulating diverse physiological processes, and are regarded as novel diagnostic biomarkers. However, the sensitive and reliable miRNA detection remains a huge challenge. Herein, we propose a proximity ligated initiated magnesium ion (Mg2+)-dependent DNAzyme-powered signal cascade for sensitive, accurate and reliable detection of miRNAs. Three signal amplification processes are involved in this approach, including the target miRNA recycle, DNAzyme powered substrate cleavage, and catalytic hairpin reaction (CHA). Based on this, the approach shows a low limit of detection of 523 aM and a wide detection range of 7 orders of magnitudes, which is comparable or superior to most of the former miRNA detection methods. In addition, the approach also possesses a high selectivity to target miRNA, suggesting a potential promising future of the approach for rapid detection of miRNAs in the application of developing novel tools for skin cancer diagnosis, and recovery evaluation.

Multiple thermocycles followed by LAMP with only two primers for ultrasensitive colorimetric viral RNA testing and tracking at single-base resolution

Rapid, accurate and high throughput measurement of infectious viruses is an urgent need to prevent viral transmission. Loop-mediated isothermal amplification (LAMP) is an attractive isothermal amplification method for nucleic acid detection, especially for point-of-care (POC) testing, but it needs at least four primers and its sensitivity is also limited when integrating with visual detection methods. Herein, by designing only two primers to precisely recognize the four regions of the target, we developed a multiple thermocycles-based LAMP method (MTC-LAMP) for sensitive and specific testing and tracking of viral RNA. We also introduced a novel SYBR Green I (SG)-assisted stable colorimetric assay induced by the amplification products through the charge neutralization effect of positively charged SG toward gold nanoparticles (AuNPs). The ultralow nonspecific background of the double exponential amplification improved the detection sensitivity to near single-molecule level (1 aM, 3 copies in 5 μL solution), which was higher than RT-PCR and RT-LAMP. After adding AuNPs, a significant color difference between target and blank was immediately observed by naked eye. By introducing a peptide nucleic acid (PNA) clamp into our colorimetric MTC-LAMP assay, the specific distinguish of virus variants at single-base resolution was observed without the requirement of any equipment. This assay shows great potential for large-scale screening and tracking of the threatening viruses with ultrahigh sensitivity and pronounced colorimetric output, which is of great importance for pandemic control.

A Novel miRNA Detection Method Using Loop-Mediated Isothermal Amplification

A novel ligation-based loop-mediated isothermal amplification has been developed for miRNA detection. Two stem-loop structure DNA linker A/B probes which hybridized with miRNA were designed to establish a rapid and ultrasensitive miRNA-LAMP system for miRNA detection. Target miR-200a was used to template the ligation of Linker A/B probes with SplintR Ligase and used as a dumbbell-shaped amplicon. By adding BIP/FIP and Bst 2.0 DNA polymerase, the LAMP reaction was carried out, which brought greatly improved amplification efficiency. The double-stranded DNA fluorescent dye EvaGreen was added for the detection of amplification product to achieve the quantification of the target miRNA. This method can detect miRNA in a linear range of seven orders of magnitude, with a detection limit of 100 fM. Therefore, this ultrasensitive miRNA-LAMP assay provides a new path for the highly sensitive quantitative analysis of miRNA, thereby bringing convenience to clinical diagnosis and prognostic research.

Double blocking gap-filling-ligation coupled with cascade isothermal amplification for ultrasensitive quantification of N6-methyladenosine

We developed a method for quantifying N6-methyladenosine at one-nucleotide resolution based on double blocking gap-filling-ligation and cascade isothermal amplification. This proposed method can detect as low as 1 fM target RNA, achieving selectivity up to approximately 100-fold between m6A and A, and has been successfully applied to the analysis of m6A at specific sites in cell samples.

A simple, sensitive and label-free method for miRNA analysis in gastric cancer via catalytic hairpin assembly assisted programming of split-G-quadruplexes

Accurate analysis of miRNA is valuable for the diagnosis of various diseases. Herein, a sensitive and accurate fluorescence method was developed for miRNA detection based on catalytic hairpin assembly (CHA) and split-G-quadruplex (split-G4) based signal reactions. The presence of target miRNA activated the CHA process through unfolding the H1 probe, which could continuously induce the proximity of split-G4. The formed intact G4 can be specifically recognized by the commercial fluorescent dye ThT (thioflavin T), allowing for the highly sensitive, label-free detection of miRNAs. By utilizing split-G4 to generate a signal, the method exhibited a low background signal and a high reliability. In addition, the method is demonstrated to be applied for clinical sample detection, implying its promising prospect for disease diagnosis.

Enzyme-Assisted Amplification and Copper Nanocluster Fluorescence Signal-Based Method for miRNA-122 Detection

At present, a large number of studies have demonstrated that miRNAs can be used as biological indicators for the diagnosis and treatment of diseases such as tumours and cancer, so it is important to develop a new miRNA detection platform. In this work, miRNA-122 is used as the basis for targeting detection agents. We have designed an unlabelled DNA1 that undergoes partial hybridisation and has a 20 T base long strand. The fluorescent signal in this experiment is derived from copper nanoclusters (CuNCs) generated on the circular T-long strand of DNA1. At the same time, DNA1 is able to react with miRNA-122 and achieve hydrolysis of the part bound to miRNA-122 via the action of nucleic acid exonuclease III (Exo III), leaving a part of the DNA, called DNA3, while releasing miRNA-122 to participate in the next reaction, thus achieving circular amplification. DNA3 is able to react with DNA2, which is bound to streptavidin magnetic beads (SIBs) and separated from the reaction solution via the application of a magnetic field. Overall, this is a fluorescence signal reduction experiment, and the strength of the fluorescence signal from the copper nanoclusters can determine whether the target miRNA-122 is present or not. The degree of fluorescence reduction indicates how much DNA1, and thus the amount of target miRNA-122, has been hydrolysed. By evaluating the variations in the fluorescence signal under optimised conditions, we discovered that this method has good sensitivity, with a detection limit as low as 0.46 nM, better than many other previous works on fluorescence signal-based biosensors for miRNA detection. This technique offers high discrimination and selectivity and can serve as a persuasive reference for early diagnosis.

DNAzyme-Amplified Cascade Catalytic Hairpin Assembly Nanosystem for Sensitive MicroRNA Imaging in Living Cells

Sensitive imaging of microRNAs (miRNAs) in living cells is significant for accurate cancer clinical diagnosis and prognosis research studies, but it is challenged by inefficient intracellular delivery, instability of nucleic acid probes, and limited amplification efficiency. Herein, we engineered a DNAzyme-amplified cascade catalytic hairpin assembly (CHA)-based nanosystem (DCC) that overcomes these challenges and improves the imaging sensitivity. This enzyme-free amplification nanosystem is based on the sequential activation of DNAzyme amplification and CHA. MnO2 nanosheets were used as nanocarriers for the delivery of nucleic acid probes, which can resist the degradation by nucleases and supply Mn2+ for the DNAzyme reaction. After entering into living cells, the MnO2 nanosheets can be decomposed by intracellular glutathione (GSH) and release the loaded nucleic acid probes. In the presence of target miRNA, the locking strand (L) was hybridized with target miRNA, and the DNAzyme was released, which then cleaved the substrate hairpin (H1). This cleavage reaction resulted in the formation of a trigger sequence (TS) that can activate CHA and recover the fluorescence readout. Meanwhile, the DNAzyme was released from the cleaved H1 and bound to other H1 for new rounds of DNAzyme-based amplification. The TS was also released from CHA and involved in the new cycle of CHA. By this DCC nanosystem, low-abundance target miRNA can activate many DNAzyme and generate numerous TS for CHA, resulting in sensitive and selective analysis of miRNAs with a limit of detection of 5.4 pM, which is 18-fold lower than that of the traditional CHA system. This stable, sensitive, and selective nanosystem holds great potential for miRNA analysis, clinical diagnosis, and other related biomedical applications.

Rolling circle extension-assisted loop-mediated isothermal amplification (Rol-LAMP) method for locus-specific and visible detection of RNA N6-methyladenosine

N6-methyladenosine (m6A) is the most prevalent RNA modification in eukaryotic mRNAs. Currently available detection methods for locus-specific m6A marks rely on RT-qPCR, radioactive methods, or high-throughput sequencing. Here, we develop a non-qPCR, ultrasensitive, isothermal, and naked-eye visible method for m6A detection based on rolling circle amplification (RCA) and loop-mediated isothermal amplification (LAMP), named m6A-Rol-LAMP, to verify putative m6A sites in transcripts obtained from the high-throughput data. When padlock probes hybridize to the potential m6A sites on targets, they are converted to circular form by DNA ligase in the absence of m6A modification, while m6A modification hinders the sealing of padlock probes. Subsequently, Bst DNA polymerase-mediated RCA and LAMP allow the amplification of the circular padlock probe to achieve the locus-specific detection of m6A. Following optimization and validation, m6A-Rol-LAMP can ultra-sensitively and quantitatively determine the existence of m6A modification on a specific target site as low as 100 amol under isothermal conditions. Detections of m6A can be performed on rRNA, mRNA, lincRNA, lncRNA and pre-miRNA from biological samples with naked-eye observations after dye incubation. Together, we provide a powerful tool for locus-specific detection of m6A, which can simply, quickly, sensitively, specifically, and visually determine putative m6A modification on RNA.

Recent advances in cascade isothermal amplification techniques for ultra-sensitive nucleic acid detection

Nucleic acid amplification techniques have always been one of the hot spots of research, especially in the outbreak of COVID-19. From the initial polymerase chain reaction (PCR) to the current popular isothermal amplification, each new amplification techniques provides new ideas and methods for nucleic acid detection. However, limited by thermostable DNA polymerase and expensive thermal cycler, PCR is difficult to achieve point of care testing (POCT). Although isothermal amplification techniques overcome the defects of temperature control, single isothermal amplification is also limited by false positives, nucleic acid sequence compatibility, and signal amplification capability to some extent. Fortunately, efforts to integrating different enzymes or amplification techniques that enable to achieve intercatalyst communication and cascaded biotransformations may overcome the corner of single isothermal amplification. In this review, we systematically summarized the design fundamentals, signal generation, evolution, and application of cascade amplification. More importantly, the challenges and trends of cascade amplification were discussed in depth.

Smartphone-Based Photothermal Lateral Flow Immunoassay Using Rhenium Diselenide Nanosheet

Developing a rapid antibody-based detection method is of great importance for preventing and controlling the spread of coronavirus disease 2019 (COVID-19). Among the antibody-based methods for point-of-care (POC) detection, lateral flow immunoassay (LFIA) is the most widely used. However, LFIA still has the disadvantage of low sensitivity. In this work, an ReSe2 nanosheet with a thickness of 10-20 nm was prepared by liquid exfoliation and applied as the label in a photothermal LFIA due to its high photothermal conversion efficiency and high photothermal stability. An integrated detection device was introduced for rapid, on-site, and highly sensitive assay of the human antisevere acute respiratory syndrome coronavirus 2 (SARS-CoV-2) Spike (S) protein IgG antibodies. The device mainly included a rhenium diselenide (ReSe2) nanosheet-based photothermal LFIA, a portable laser, and a smartphone with a portable thermal imager, which was used to record and analyze the thermal signal of the LFIA test zone. The human anti-SARS-COV-2 S protein IgG antibodies in buffer solution can be detected in a portable box within 10 min, with a thermal signal detection limit of 0.86 ng mL-1, which was 108-fold lower than that of the colorimetric signal. The integrated device can detect values as low as 2.76 ng mL-1 of the human anti-SARS-COV-2 S protein IgG antibodies in 50% serum. The integrated device showed great potential for rapid and home self-testing diagnosis of COVID-19.

Enzyme-Assisted Nucleic Acid Amplification in Molecular Diagnosis: A Review

Infectious diseases and tumors have become the biggest medical challenges in the 21st century. They are driven by multiple factors such as population growth, aging, climate change, genetic predispositions and more. Nucleic acid amplification technologies (NAATs) are used for rapid and accurate diagnostic testing, providing critical information in order to facilitate better follow-up treatment and prognosis. NAATs are widely used due their high sensitivity, specificity, rapid amplification and detection. It should be noted that different NAATs can be selected according to different environments and research fields; for example, isothermal amplification with a simple operation can be preferred in developing countries or resource-poor areas. In the field of translational medicine, CRISPR has shown great prospects. The core component of NAAT lies in the activity of different enzymes. As the most critical material of nucleic acid amplification, the key role of the enzyme is self-evident, playing the upmost important role in molecular diagnosis. In this review, several common enzymes used in NAATs are compared and described in detail. Furthermore, we summarize both the advances and common issues of NAATs in clinical application.

Ti3C2@Bi2O3 nanoaccordion for electrochemical determination of miRNA-21

Based on a dual signal amplification strategy of novel accordion-like Bi₂O₃-decorated Ti₃C₂ (Ti₃C₂@Bi₂O₃) nanocomposites and hybridization chain reaction (HCR), an ultra-sensitive electrochemical biosensor was constructed for miRNA-21 detection. By etching Ti₃AlC₂ with HF, Ti₃C₂ with an accordion-like structure was first obtained and subsequently covered by Bi₂O₃ nanoparticles (NPs), forming Ti₃C₂@Bi₂O₃. A layer of Au NPs was electrodeposited on the glassy carbon electrode coated with Ti₃C₂@Bi₂O₃, which not only significantly improved the electron transport capacity of the electrode but also greatly increased its surface active area. Upon the immobilization of the thiolated capture probe (SH-CP) on the electrode, the target miRNA-21 specifically hybridized with SH-CP and thus opened its hairpin structure, triggering HCR to form a long double strand with the primers H1 and H2. A large number of the electrochemical indicator molecules were thus embedded inside the long double strands to produce the desirable electrochemical signal at a potential of - 0.19 V (vs. Ag/AgCl). Such dual signal amplification strategy successfully endowed the biosensor with ultra-high sensitivity for miRNA-21 detection in a wide linear range from 1 fM to 100 pM with a detection limit as low as 0.16 fM. The excellent detection of miRNA-21 in human blood plasma displayed a broad prospect in clinical diagnosis. An ultra-sensitive electrochemical biosensor was successfully constructed for miRNA-21 detection in human blood plasma based on the dual signal amplification strategy of novel accordion-like Bi₂O₃ decorated Ti₃C₂ (Ti₃C₂@Bi₂O₃) nanocomposites and hybridization chain reaction.

Recent advances on the electrochemical and optical biosensing strategies for monitoring microRNA-21: a review

The small non-coding RNA, microRNA-21 (miR-21), is dysregulated in various cancers and can be considered an appropriate target for therapeutic approaches. Therefore, the detection of miR-21 concentration is important in the diagnosis of diseases. Low specificity and the cost of materials are two necessary limitations in the traditional diagnosis method such as RT-PCR, northern blotting and microarray analysis. Biosensor technology can play an effective role in improving the quality of human life due to its capacity of rapid diagnosis, monitoring different markers, suitable sensitivity, and specificity. Moreover, bioanalytical systems have an essential role in the detection of biomolecules or miRNAs due to their critical features, including easy usage, portability, low cost and real-time analysis. Electrochemical biosensors based on novel nanomaterials and oligonucleotides can hybridize with miR-21 in different ranges. Moreover, optical biosensors and piezoelectric devices have been developed for miR-21 detection. In this study, we have evaluated different materials used in bioanalytical systems for miR-21 detection as well as various nanomaterials that offer improved electrodes for its detection.

Recent advances in PCR-free nucleic acid detection for SARS-COV-2

As the outbreak of Coronavirus disease 2019 (COVID-19) caused by severe acute respiratory disease coronavirus 2 (SARS-COV-2), fast, accurate, and economic detection of viral infection has become crucial for stopping the spread. Polymerase chain reaction (PCR) of viral nucleic acids has been the gold standard method for SARS-COV-2 detection, which, however, generally requires sophisticated facilities and laboratory space, and is time consuming. This review presents recent advances in PCR-free nucleic acid detection methods for SARS-CoV-2, including emerging methods of isothermal amplification, nucleic acid enzymes, electrochemistry and CRISPR.

Ultrasenstive SERS biosensor based on Zn2+ from ZnO nanoparticle assisted DNA enzyme amplification for detection of miRNA

In this work, a simple and sensitive SERS biosensor was proposed for ultrasensitive detecting miRNA 122 based on ZnO nanoparticle amplification strategy and the full utilization of DNA chain. Firstly, ZnO@S1/S2 and CoFe₂O₄@S3 complexes can flock together with the assistance of target miRNA. Accompanied with the incremental amount of miRNA, the quantity of ZnO@S1/S2 would increase. Therefore, a significant amplification capability can be obtained by converting ZnO complexes into Zn²⁺ with the assistance of HCl. In this case, the DNA chain S2 can be obtained by the ZnO dissolving. In addition, through a clever design, the obtained Zn²⁺ can be further utilized to induce DNA enzyme cycle amplification to cleave S5 into DNA chain which was similar with DNA S2. This step greatly avoided the waste of DNA chains and improved the utilization efficiency of DNA chains. The S2 and abundant S2 analogues can complement with S4 on the Raman sensing interface to imbed lots of Raman probe DOX for obtaining strong Raman signal. By this way, with the increased number of miRNA, the S2 and abundant S2 analogues would increase, so the amount of DOX would increase to produce strong Raman signal to quantitatively detect target miRNA. As a result, this SERS biosensor based on Zn⁺ amplification and high utilization efficiency of DNA chain can obtain a low detection limit of 6.82 aM and wide linear range from 10 aM to 10 pM, which shown great potential in the clinical application and medical diagnosis.

Nucleic Acids Detection for Mycobacterium tuberculosis Based on Gold Nanoparticles Counting and Rolling-Circle Amplification

Tuberculosis (TB) is a common infectious disease caused by Mycobacterium tuberculosis, which usually disturbs the lungs, and remains the second leading cause of death from an infectious disease worldwide after the human immunodeficiency virus. Herein, we constructed a simple and sensitive method for Mycobacterium tuberculosis-specific DNA detection with the dark-field microscopic imaging of gold nanoparticles (AuNPs) counting strategy and rolling-circle amplification (RCA). Taking advantage of RCA amplification, one target molecule produced hundreds of general oligonucleotides, which could form the sandwich structure with capture-strand-modified magnetic beads and AuNPs. After magnetic separation, AuNPs were released and detected by dark-field imaging; about 10 fM Mycobacterium tuberculosis-specific DNA target can still be differentiated from the blank. No significant change of the absorbance signals was observed when the target DNA to genomic DNA ratio (in mass) was from 1:0 to 1:10⁶. The spike recovery results in genomic DNA from human and Klebsiella pneumoniae suggested that the proposed method has the feasibility for application with biological samples. This proposed method is performed on an entry-level dark-field microscope setup with only a 6 μL detection volume, which creates a new, simple, sensitive, and valuable tool for pathogen detection.

Development of Loop Mediated Isothermal Amplification (LAMP): A new tool for rapid diagnosis of cotton leaf curl viral disease

Cotton leaf curl disease (CLCuD) ranks top among all endemic diseases transmitted by whitefly (Bemisia tabaci) affecting cotton (Gossypium hirsutum) causing severe economic losses to the cotton growers in the Indian subcontinent. For its effective management, robust tools for detection are a prerequisite and it is important to diagnose the virus titre in early stage of infection in plants as well as in the disease transmitting vector. Considering the limitations in current PCR-based techniques we have standardized rapid and sensitive Loop Mediated Isothermal Amplification (LAMP) protocol for the diagnosis of cotton leaf curl virus (CLCuV) in cotton leaves and in its transmitting vector whitefly. Perhaps, this is the first report of use of LAMP tool for rapid diagnosis of CLCuV in cotton and its transmitting vector the whitefly. Further, the colorimetric detection for diagnostic simplicity of amplified LAMP product by using different dyes lead to enhanced applicability of this technique in the field of disease diagnostics. The merit of present study is that the diagnostic failure of PCR and LAMP due to low virus titre in the infected leaf has been circumvented through the combination of rolling circle amplification (RCA) with LAMP. Thus RCA-LAMP can be an option for ultra-sensitive detection of samples with low virus titre. The potential applications of this advanced diagnostic tool in laboratory research on diagnosis of CLCuV, an important viral pathogen of cotton have been discussed.

Modern Methods for Assessment of microRNAs

The review discusses modern methods for the quantitative and semi-quantitative analysis of miRNAs, which are small non-coding RNAs affecting numerous biological processes such as development, differentiation, metabolism, and immune response. miRNAs are considered as promising biomarkers in the diagnosis of various diseases.

Circulating Abnormal Extracellular Vesicles: Their Mechanism for Crossing Blood-Brain Barrier, Effects on Central Nervous System and Detection Methods

Central nervous system (CNS) diseases are difficult to treat and harmful. Many CNS diseases are secondary to peripheral diseases, such as tumor brain metastases (BMS), viral infections and inflammation of the brain, and their pathogenic factors travel through the circulatory system to the brain, eventually leading to lesions. Extracellular vesicles (EVs) play an important role in this process. Recent studies have shown that, extracellular EVs can effectively cross the blood- brain barrier (BBB) through endocytosis and they transmit molecular signals in cell-to-cell communication. Abnormal EVs produced in the lesion portion transport pathogenic factors, including miRNAs, proteins, and virions into the CNS. These pathogenic factors participate in cellular pathways to interfere with homeostasis or are themselves pathogens that directly damage CNS. In addition, different or specific pathological molecules in EVs are potential disease markers. We herein reviewed pathways through which the abnormal EVs cross BBB and adverse effects of abnormal exosomes. We also and summarized their existing detection techniques, so as to provide basis for prevention and early diagnosis of secondary diseases.

Isothermal nucleic acid amplification technology for rapid detection of virus

While the research field and industrial market of in vitro diagnosis (IVD) thrived during and post the COVID-19 pandemic, the development of isothermal nucleic acid amplification test (INAAT) based rapid diagnosis was engendered in a global wised large measure as a problem-solving exercise. This review systematically analyzed the recent advances of INAAT strategies with practical case for the real-world scenario virus detection applications. With the qualities that make INAAT systems useful for making diagnosis relevant decisions, the key performance indicators and the cost-effectiveness of enzyme-assisted methods and enzyme-free methods were compared. The modularity of nucleic acid amplification reactions that can lead to thresholding signal amplifications using INAAT reagents and their methodology design were examined, alongside the potential application with rapid test platform/device integration. Given that clinical practitioners are, by and large, unaware of many the isothermal nucleic acid test advances. This review could bridge the arcane research field of different INAAT systems and signal output modalities with end-users in clinic when choosing suitable test kits and/or methods for rapid virus detection.

Anti-Interference Detection of Vibrio parahaemolyticus from Aquatic Food Based on Target-Cyclized RCA with Dynamic Adapter Followed by LAMP

Vibrio parahaemolyticus (V. parahaemolyticus) is considered the most concerning pathogen for seafood. Like other pathogens in food samples, its gene detection suffers from a problem of background interference when isothermal detection methods are used. The sensitivity and specificity greatly decrease due to large amounts of background genome. Here we describe a novel isothermal detection technology based on target-cyclized rolling circle amplification combined with loop-mediated isothermal amplification (tRCA-lamp). By avoiding unexpected ligation, a short dynamic adapter is employed to increase the sensitivity of target cyclization in the presence of the background genome. At the amplification step, highly specific detection is obtained by linear RCA and simplified LAMP (only two primers are used). Furthermore, visual detection is easily realized with hydroxynaphthol blue (HNB). In the oyster samples, the tRCA-lamp approach can detect V. parahaemolyticus with a detection limit of 22 cfu/g with none necessary to enrich the bacteria and remove the host DNA. This method gets rid of the complicated primer design process and can be extended to the detection of other pathogens in food samples.

Metal-organic frameworks-assisted nonenzymatic cascade amplification multiplexed strategy for sensing acute myocardial infarction related microRNAs

Amplification strategies for multiple microRNAs (miRNAs) detection are pivotal for acute myocardial infarction (AMI). Herein, we rationally developed a metal-organic frameworks-assisted nonenzymatic cascade amplification strategy for simultaneous quantification of three AMI-related miRNAs (miR-21, miR-499 and miR-133a). The fluorescence of the elaborately designed DNA molecular beacons with the respective modification of FAM, TAMRA and Cy5 in the terminal was quenched by a metal-organic framework named Fe-MIL-88. When targets miRNA appeared, they hybridized with the corresponding DNA molecular beacons, and the catalyzed hairpin assembly (CHA) reaction would be triggered, producing "Y" shaped three-branched duplex nanostructure with the targets released, and initiating subsequent another cycle. The "Y" shaped nanostructures could not be adsorbed onto the surface of Fe-MIL-88 due to the weaker affinity between Fe-MIL-88 and "Y" shaped nanostructures. Therefore, the fluorescence of "Y" shaped nanostructures could not be quenched by Fe-MIL-88. In this way, three AMI-related miRNAs were simultaneously detected in the respective ranges of 0.05-30 nM, 0.08-30 nM and 0.1-20 nM with respective limits of detection down to 13, 25 and 40 pM. Furthermore, the method was successfully employed to determine three AMI-related miRNAs in human serum. The strategy offered great opportunity for ultrasensitive detecting multiple AMI-related miRNAs and substantially improving the accuracy of clinical early AMI diagnosis.

MicroRNA detection using light-up aptamer amplification based on nuclease protection transcription

The quantification of microRNAs (miRNAs) is important because the miRNA expression level is closely associated with the occurrence and development of diseases. Here, we report a simple nuclease protection transcription...

Functional nucleic acid biosensors utilizing rolling circle amplification

Functional nucleic acids regulate rolling circle amplification to produce multiple detection outputs suitable for the development of point-of-care diagnostic devices.

Recent advances in biological detection with rolling circle amplification: design strategy, biosensing mechanism, and practical applications

Rolling circle amplification (RCA) is a simple and isothermal DNA amplification technique that is used to generate thousands of repeating DNA sequences using circular templates under the catalysis of DNA polymerase.

Establishment and Application of Ligation Reaction-Based Method for Quantifying MicroR-156b

Microribonucleic acids (miRNAs) play significant roles in the regulation of biological processes and in responses to biotic or abiotic environmental stresses. Therefore, it is necessary to quantitatively detect miRNAs to understand these complicated biological regulation mechanisms. This study established an ultrasensitive and highly specific method for the quantitative detection of miRNAs using simple operations on the ground of the ligation reaction of ribonucleotide-modified deoxyribonucleic acid (DNA) probes. This method avoids the complex design of conventional reverse transcription. In the developed assay, the target miRNA miR156b was able to directly hybridize the two ribonucleotide-modified DNA probes, and amplification with universal primers was achieved following the ligation reaction. As a result, the target miRNA could be sensitively measured even at a detection limit as low as 0.0001 amol, and differences of only a single base could be detected between miR156 family members. Moreover, the proposed quantitative method demonstrated satisfactory results for overexpression-based genetically modified (GM) soybean. Ligation-based quantitative polymerase chain reaction (PCR) therefore has potential in investigating the biological functions of miRNAs, as well as in supervising activities regarding GM products or organisms.

A self-quenching fluorescence probe-mediated exponential isothermal amplification system for highly sensitive and specific detection of microRNAs

We designed an efficient self-quenching fluorescence probe and constructed this probe-mediated exponential isothermal amplification system for miRNA detection. Owing to the significant improvement in the detective signal-to-background ratio, a wide dynamic range of 9 orders of magnitude and a limit of detection as low as 0.08 aM can be easily achieved in a single step. Furthermore, benefiting from the additional advantages of high specificity and biocompatibility, the proposed method has been demonstrated to be capable of accurately quantifying miRNA biomarkers in serum, which will provide promising perspectives for clinical diagnosis.

Soft nanoball-encapsulated carbon dots for reactive oxygen species scavenging and the highly sensitive chemiluminescent assay of nucleic acid biomarkers

The expression level of nucleic acids is closely related to a variety of diseases. Herein, a highly sensitive detection of a nucleic acid based on a CoOOH-luminol chemiluminescence (CL) system without the addition of oxidants was proposed by the toehold-mediated strand displacement reaction (TSDR) and the liposome dual signal amplification strategy with the hybrid probe formed by linking soft nanoballs (SNBs) to magnetic beads (MBs) through DNA hybridization. Inspired by the free radical scavenging effect of the as-prepared carbon dots (CDs), CDs were successfully employed to quench the CL intensity of the CoOOH-luminol system. And the CDs were further encapsulated into liposomes to construct SNBs, which avoided the complex modification of CDs to maintain their original properties, as well as loaded a large number of CDs to scavenge free radicals to achieve signal amplification. Based on this, target DNA (tDNA) could be sensitively detected based on the reduced CL intensity, which achieved a dynamic detection range from 0.1 nM to 20 nM with a limit of detection as low as 59 pM (3σ/k), showing amazing promise in the biosensing of nucleic acid biomarkers.

Modular DNA Circuits for Point-of-Care Colorimetric Assay of Infectious Pathogens

Accurate, specific, and inexpensive detection of multiple infectious pathogens simultaneously is a significant goal for human health and safety. Herein we present a rationally designed modular DNA circuit for point-of-care (POC) detection of a variety of infectious pathogens based on nucleic acid isothermal amplification technology and DNAzyme-mediated colorimetric readout. A modular DNA circuit was constructed with a fixed module and a flexible module and was rationally designed according to genetic targets. On this basis, the platform could detect multiple genetic targets corresponding to infectious pathogens simultaneously. Signal amplification properties of the DNA circuit and the peroxidase-like DNAzyme enable the detection limits to reach the picomolar level. By urea treatment and magnetic separation, the fixed module can be reused at least five times, which makes this assay more economical and environmentally friendly. The detection of genetic infectious pathogens should be accomplished in 2 h with naked-eye observation and may provide an efficient tool for POC analysis of multiple infectious pathogens, especially in resource-poor areas.

Rolling Circle and Loop Mediated Isothermal Amplification Strategy for Ultrasensitive miRNA Detection

Rolling circle amplification (RCA) and loop mediated isothermal amplification (LAMP) were combined to establish the rolling circle and loop mediated isothermal amplification (RC-LAMP) method for miRNA detection. With the participation of Bst 2.0 DNA Polymerase, the method enabled RCA and LAMP amplification to occur simultaneously without thermal cycling. The limit of detection of RC-LAMP was 500 amol/L, which is comparable to previously reported amplification strategies. Moreover, its upper limit of quantitation was higher and showed a stronger resistance to matrix interference. Therefore, it is possible to detect low concentrations of miRNA in samples by increasing the total RNA added. Owing to its facile detection mode and simple operation, this method has great potential in clinical sample detection.