Thin-layer MoS2 and thionin composite-based electrochemical sensing platform for rapid and sensitive detection of zearalenone in human biofluids

Hydrangea-like TiO2/Bi2MoO6 porous nanoflowers triggering highly sensitive electrochemical immunosensing to tumor marker

Rapid and sensitive detection of carcinoembryonic antigen (CEA) is of great significance for cancer patients. Here, molybdenum (Mo) was doped into bismuth oxide (Bi2O3) by one-pot hydrothermal method forming porous tremella Bi2MoO6 nanocomposites with a larger specific surface area than the spherical structure. Then, a new kind of hydrangea-like TiO2/Bi2MoO6 porous nanoflowers (NFs) was prepared by doping titanium into Bi2MoO6, where titanium dioxide (TiO2) grew in situ on the surface of Bi2MoO6 nanoparticles (NPs). The hydrangea-like structure provides larger specific surface area, higher electron transfer ability and biocompatibility as well as more active sites conducive to the attachment of anti-carcinoembryonic antigen (anti-CEA) to TiO2/Bi2MoO6 NFs. A novel label-free electrochemical immunosensor was then constructed for the quantitative detection of CEA using TiO2/Bi2MoO6 NFs as sensing platform, showing a good linear relationship with CEA in the concentration range 1.0 pg/mL ~ 1.0 mg/mL and a detection limit of 0.125 pg/mL (S/N = 3). The results achieved with the designed immunosensor are comparable with many existing immunosensors used for the detection of CEA in real samples.

Signal Amplification Strategy Design in Nanozyme-Based Biosensors for Highly Sensitive Detection of Trace Biomarkers

Nanozymes show great promise in enhancing disease biomarker sensing by leveraging their physicochemical properties and enzymatic activities. These qualities facilitate signal amplification and matrix effects reduction, thus boosting biomarker sensing performance. In this review, recent studies from the last five years, concentrating on disease biomarker detection improvement through nanozyme-based biosensing are examined. This enhancement primarily involves the modulations of the size, morphology, doping, modification, electromagnetic mechanisms, electron conduction efficiency, and surface plasmon resonance effects of nanozymes for increased sensitivity. In addition, a comprehensive description of the synthesis and tuning strategies employed for nanozymes has been provided. This includes a detailed elucidation of their catalytic mechanisms in alignment with the fundamental principles of enhanced sensing technology, accompanied by the presentation of quantitatively analyzed results. Moreover, the diverse applications of nanozymes in strip sensing, colorimetric sensing, electrochemical sensing, and surface-enhanced Raman scattering have been outlined. Additionally, the limitations, challenges, and corresponding recommendations concerning the application of nanozymes in biosensing have been summarized. Furthermore, insights have been offered into the future development and outlook of nanozymes for biosensing. This review aims to serve not only as a reference for enhancing the sensitivity of nanozyme-based biosensors but also as a catalyst for exploring nanozyme properties and their broader applications in biosensing.

A quantum dot aptamer fluorescent sensor based on magnetic graphene oxide for the detection of zearalenone

As an estrogenic mycotoxin found in a wide range of agricultural crops, the toxicity of zearalenone (ZEN) poses a serious risk to human health. Accordingly, to achieve rapid detection of zearalenone in complex samples, an aptamer fluorescence sensor based on magnetic graphene oxide was developed. Compared with traditional methods, this technique has the virtues of simple operation, low cost, and reliable performance. Magnetic graphene oxide (MGO) was synthesized as a fluorescent bursting agent, using a chemical precipitation approach by depositing Fe3O4 on the surface of graphene oxide. As a fluorescent probe, an aptamer coupling with CdTe quantum dots and zearalenone was used. Following the specific binding of zearalenone and the aptamer, the affinity interaction between the fluorescent probe and MGO was weakened, resulting in the recovery of fluorescence and making the qualitative and quantitative analysis of zearalenone available via fluorescence intensity determination. The results indicated that the method's linear range was 5-120 μg L-1 and its detection limit was 2.9 μg L-1. In addition, the recoveries varied from 76.4 to 118.8% for crop samples, with relative standard deviations (RSDs) between 0.8 and 9.5%, which suggests an effective method for the separation and detection of mycotoxins in actual environmental samples.

An electrochemical aptasensor based on P-Ce-MOF@MWCNTs as signal amplification strategy for highly sensitive detection of zearalenone

In this research, a signal-off electrochemical aptasensor with high sensitivity was constructed for trace detection of zearalenone (ZEN). Specifically, Ce-based metal-organic framework and multi-walled carbon nanotubes nanocomposite was functionalized with polyethyleneimine (P-Ce-MOF@MWCNTs) and served as sensing platform for its high surface area and excellent electrochemical active. Subsequently, toluidine blue (TB) was electrodeposited as the signal probe, and platinum@gold nanoparticles (Pt@Au) were dropped for the attachment of aptamer (ZEA). In the presence of ZEN, the ZEA would specifically recognize and combine with the target, causing a decrease of electrochemical signal from TB. Under the optimal conditions, the aptasensor exhibited good linear relationship for ZEN in a concentration range from 5.0 × 10^-5 to 50.0 ng/mL, while the limit of detection (LOD, S/N = 3) and limit of quantitation (LOQ, S/N = 10) were 1.0 × 10^-5 ng/mL and 2.9 × 10^-5 ng/mL, respectively. Ultimately, the aptasensor was successfully applied into ZEN detection in semen coicis real samples.

Advances in immunoassay-based strategies for mycotoxin detection in food: From single-mode immunosensors to dual-mode immunosensors

Mycotoxin contamination in foods and other goods has become a broad issue owing to serious toxicity, tremendous threat to public safety, and terrible loss of resources. Herein, it is necessary to develop simple, sensitive, inexpensive, and rapid platforms for the detection of mycotoxins. Currently, the limitation of instrumental and chemical methods cannot be massively applied in practice. Immunoassays are considered one of the best candidates for toxin detection due to their simplicity, rapidness, and cost-effectiveness. Especially, the field of dual-mode immunosensors and corresponding assays is rapidly developing as an advanced and intersected technology. So, this review summarized the types and detection principles of single-mode immunosensors including optical and electrical immunosensors in recent years, then focused on developing dual-mode immunosensors including integrated immunosensors and combined immunosensors to detect mycotoxins, as well as the combination of dual-mode immunosensors with a portable device for point-of-care test. The remaining challenges were discussed with the aim of stimulating future development of dual-mode immunosensors to accelerate the transformation of scientific laboratory technologies into easy-to-operate and rapid detection platforms.

Recent advances in simultaneous detection strategies for multi-mycotoxins in foods

Mycotoxin contamination has become a challenge in the field of food safety testing, given the increasing emphasis on food safety in recent years. Mycotoxins are widely distributed, in heavily polluted areas. Food contamination with these toxins is difficult to prevent and control. Mycotoxins, as are small-molecule toxic metabolites produced by several species belonging to the genera Aspergillus, Fusarium, and Penicillium growing in food. They are considered teratogenic, carcinogenic, and mutagenic to humans and animals. Food systems are often simultaneously contaminated with multiple mycotoxins. Due to the additive or synergistic toxicological effects caused by the co-existence of multiple mycotoxins, their individual detection requires reliable, accurate, and high-throughput techniques. Currently available, methods for the detection of multiple mycotoxins are mainly based on chromatography, spectroscopy (colorimetry, fluorescence, and surface-enhanced Raman scattering), and electrochemistry. This review provides a comprehensive overview of advances in the multiple detection methods of mycotoxins during the recent 5 years. The principles and features of these techniques are described. The practical applications and challenges associated with assays for multiple detection methods of mycotoxins are summarized. The potential for future development and application is discussed in an effort, to provide standards of references for further research.

A label-free visual aptasensor for zearalenone detection based on target-responsive aptamer-cross-linked hydrogel and color change of gold nanoparticles

ZEN-responsive hydrogel was prepared using ZEN aptamer and a cationic conjugated skeleton which was formed by the electrostatic interaction between acrylamide and poly (diallyldimethylammonium chloride) (PDDA). In the presence of ZEN, the binding of aptamer and ZEN caused the hydrogel to dissociate, releasing the gold nanoparticles (AuNPs) encapsulated in the hydrogel into supernatant, whose color changes serving as response instructions were observed by eyes. To realize low dose visual detection, the TMB-H₂O₂ was used for quantitative readout by AuNPs released from the hydrogel which can efficiently catalyze the reaction to generate a obvious change.There was a good linear relationship between the changed absorbance and concentration of ZEN within 2.5-100 ng/mL, a detection limit of 0.98 ng/mL, recovery rates of 98.8%-101.3% and 99.8%-101.5% for corns and beer, respectively. This developed sensing strategy would provide a promising application for other mycotoxins by replacing the corresponding aptamer sequences.

Dual-template molecularly imprinted electrochemical biosensor for IgG-IgM combined assay based on a dual-signal strategy

Detection of immunoglobulins (Igs) is of clinical significance for early diagnosis and timely treatment of diseases. Herein, a dual-template molecularly imprinted (DTMI) electrochemical biosensor was developed for IgG-IgM combined assay. In this DTMI electrochemical biosensor, Prussian blue (PB) and thionine (TH) decorated on graphene oxide (GO) and multi-walled carbon nanotubes (MWCNTs), respectively, were utilized as the dual-signal probes, and Au nanoparticles (AuNPs) were used for Igs anchoring and signal amplification. Polypyrrole (PPy) was electrodeposited on the biosensor surface and acted as the molecularly imprinted polymers (MIPs). After the removal of the IgG and IgM templates, the resultant DTMI electrochemical biosensor was used for IgG-IgM combined assay, and the concentrations of IgG and IgM could be indicated by the changes in the peak currents of PB (ΔI_PB) and TH (ΔI_TH), respectively. The DTMI electrochemical biosensor displayed a wide linear range and a low limit of detection (LOD) for both IgG (28.80 pg mL^-1) and IgM (0.58 pg mL^-1). Finally, the developed DTMI biosensor was used for IgG-IgM combined assay in clinical serum samples, and the results were comparable to those obtained by conventional immunoturbidimetry, implying its great potential in clinical diagnosis.

Progress and challenges in sensing of mycotoxins using molecularly imprinted polymers

Mycotoxin is toxic secondary metabolite formed by certain filamentous fungi. This toxic compound can enter the food chain through contamination of food (e.g., by colonization of toxigenic fungi on food). In light of the growing concerns on the health hazards posed by mycotoxins, it is desirable to develop reliable analytical tools for their detection in food products in both sensitive and efficient manner. For this purpose, the potential utility of molecularly imprinted polymers (MIPs) has been explored due to their meritful properties (e.g., large number of tailor-made binding sites, sensitive template molecules, high recognition specificity, and structure predictability). This review addresses the recent advances in the application of MIPs toward the sensing of various mycotoxins (e.g., aflatoxins and patulin) along with their fabrication strategies. Then, performance evaluation is made for various types of MIP- and non-MIP-based sensing platforms built for the listed target mycotoxins in terms of quality assurance such as limit of detection (LOD). Further, the present challenges in the MIP-based sensing application of mycotoxins are discussed along with the future outlook in this research field.

Highly sensitive and convenient aptasensor based on Au NPs@Ce-TpBpy COF for quantitative determination of zearalenone

In this work, an aptasensor based on a portable U-disk electrochemical workstation in combination with a screen-printed electrode (SPE) is demonstrated for the quantitative determination of zearalenone (ZEN). The aptamer is immobilized on Au NPs@Ce-TpBpy COF (Covalent organic frameworks), which is modified on the surface of glassy carbon electrode. ZEN specifically binds to ZEN aptamer, which hinders the electron transfer and decreases the catalytic current of Au NPs@Ce-TpBpy COF for the reduction of hydrogen peroxide, measured by chronoamperometry (i-t). The quantitative detection of ZEN toxin is realized by a decrease of the catalytic current (ΔI). Under the optimal experimental conditions, the aptamer sensor exhibited excellent sensitivity, selectivity, reproducibility. A wide linear range of 1 pg mL^-1-10.0 ng mL^-1 with a detection limit of 0.389 pg mL^-1 (at 3σ) was obtained. The linear equation is ΔI = 0.401 lg c + 1.948 with a correlation coefficient of 0.9906. The recovery is in the range of 93.0-104.7% for the cornflour samples. The proposed method offers a new strategy for the rapid, inexpensive, and real-time detection of ZEN.

A label-free amperometric immunosensor with improved electrocatalytic 3D braided AuPtCu-SWCNTs@MoS2-rGO for human growth differentiation factor-15 detection

Growth differentiation factor-15 (GDF-15) is a member of the transforming growth factor-β family. GDF-15 is overexpressed in cardiovascular diseases and has become a novel biomarker for these diseases. In this study, we fabricated a label-free electrochemical immunosensor for sensitive detection of GDF-15. Briefly, a three-dimensional braided composite of AuPtCu-SWCNTs@MoS₂-rGO (denoted A@M), which served as a label-free immunosensor platform, was obtained by wrapping single-walled carbon nanotubes (SWCNTs) with trimetallic nanoflowers (AuPtCu NFs) woven on a three-dimensional network nanostructure composed of Molybdenum disulfide (MoS₂) and reduced graphene oxide (rGO) nanosheets. This optimization improved the ability of the platform to immobilize antibodies, accelerated the reduction of hydrogen peroxide, and promoted the migration rate of electrons on the electrode surface, thereby further amplifying the electrical signal and improving the sensitivity. The constructed sensor exhibited high sensitivity over a wide linear range from 1 pg mL^-1 to 50 ng mL^-1, with a low detection limit of 0.825 pg mL^-1 for GDF-15. The fabricated label-free immunosensor exhibits satisfactory reproducibility, selectivity, and stability. The detection of actual samples was successful, enabling a broad scope of application in the early diagnosis, prognosis, and treatment of cardiovascular diseases.

Recent advances in the highly sensitive determination of zearalenone residues in water and environmental resources with electrochemical biosensors

Zearalenone (ZEN), a significant class of mycotoxin which is considered as a xenoestrogen, permits, similar to natural estrogens, it's binding to the receptors of estrogen resulting in various reproductive diseases especially, hormonal misbalance. ZEN has toxic effects on human and animal health as a result of its teratogenicity, carcinogenicity, mutagenicity, nephrotoxicity, genotoxicity, and immunotoxicity. To ensure water and environmental resources safety, precise, rapid, sensitive, and reliable analytical and conventional methods can be progressed for the determination of toxins such as ZEN. Different selective nanomaterial-based compounds are used in conjunction with different analytical detection approaches to achieve this goal. The current review demonstrates the state-of-the-art advances of nanomaterial-based electrochemical sensing assays including various sensing, apta-sensing and, immunosensing studies to the highly sensitive determination of various ZEN families. At first, a concise study of the occurrence, structure, toxicity, legislations, and distribution of ZEN in monitoring has been performed. Then, different conventional and clinical techniques and procedures to sensitive and selective sensing techniques have been reviewed and the efficient comparison of them has been thoroughly discussed. This study has also summarized the salient features and the requirements for applying various sensing and biosensing platforms and diverse immobilization techniques in ZEN detection. Finally, we have defined the performance of several electrochemical sensors applying diverse recognition elements couples with nanomaterials fabricated using various recognition elements coupled with nanomaterials (metal NPs, metal oxide nanoparticles (NPs), graphene, and CNT) the issues limiting development, and the forthcoming tasks in successful construction with the applied nanomaterials.

Detection and electrocatalytic mechanism of zearalenone using nanohybrid sensor based on copper-based metal-organic framework/magnetic Fe3O4-graphene oxide modified electrode

A novel and simple strategy was proposed for the determination of ZEA in breakfast cereal, maize powder and rice flour using an electrochemical nanohybrid sensor based on copper-based metal-organic framework (Cu-MOF)/magnetic Fe₃O₄-graphene oxide (Fe₃O₄-GO) modified electrode fabricated by the layer-by-layer assembled technique. The synthesized Cu-MOF with high porosity favorably improved the effective surface area and the analytical performance of nanohybrid sensing electrode. The crafted sensor has large surface area, high electron transfer, and satisfactory efficiency. ZEA was electrochemically detected in a wide linear range from 159.2 to 2865.2 ng mL^-1 with LOD of 23.14 ng mL^-1 under the optimal conditions. Moreover, the electrocatalytic mechanism of ZEA oxidation was proposed by density functional theory (DFT). A favorable energetic interaction was presented when Cu-MOF adsorbed on Fe₃O₄-GO, and a small new band appeared on the Fermi level energy (E_f) that facilitated the electron transfer between bands.

A label-free electrochemical immunosensing platform based on PEI-rGO/Pt@Au NRs for rapid and sensitive detection of zearalenone

In this work, we design an immunosensor for zearalenone (ZEN) detection with PEI-rGO/Pt@Au NRs nanocomposite as the modification material. PEI-rGO/Pt@Au NRs nanocomposite have good stability, conductivity and a large specific surface area, so they are chosen as the substrate material for the modified electrode, which is beneficial in improving the detection performance of the sensor. When antibody binds to ZEN, the current signal decreases, and the response signal changes after ZEN incubation, recorded by differential pulse voltammetry (DPV) methods. Under the optimised conditions, the electrochemical response of the constructed immunosensor shows a linear relation to a wide concentration range from 1 pg/mL to 1 × 106 pg/mL with a detection limit of 0.02 pg/mL. Additionally, the proposed electrochemical immunosensor has high selectivity, good stability and great potential for the trace detection of ZEN in real samples.

Recent Progress in Rapid Determination of Mycotoxins Based on Emerging Biorecognition Molecules: A Review

Mycotoxins are secondary metabolites produced by fungal species, which pose significant risk to humans and livestock. The mycotoxins which are produced from Aspergillus, Penicillium, and Fusarium are considered most important and therefore regulated in food- and feedstuffs. Analyses are predominantly performed by official laboratory methods in centralized labs by expert technicians. There is an urgent demand for new low-cost, easy-to-use, and portable analytical devices for rapid on-site determination. Most significant advances were realized in the field bioanalytical techniques based on molecular recognition. This review aims to discuss recent progress in the generation of native biomolecules and new bioinspired materials towards mycotoxins for the development of reliable bioreceptor-based analytical methods. After brief presentation of basic knowledge regarding characteristics of most important mycotoxins, the generation, benefits, and limitations of present and emerging biorecognition molecules, such as polyclonal (pAb), monoclonal (mAb), recombinant antibodies (rAb), aptamers, short peptides, and molecularly imprinted polymers (MIPs), are discussed. Hereinafter, the use of binders in different areas of application, including sample preparation, microplate- and tube-based assays, lateral flow devices, and biosensors, is highlighted. Special focus, on a global scale, is placed on commercial availability of single receptor molecules, test-kits, and biosensor platforms using multiplexed bead-based suspension assays and planar biochip arrays. Future outlook is given with special emphasis on new challenges, such as increasing use of rAb based on synthetic and naïve antibody libraries to renounce animal immunization, multiple-analyte test-kits and high-throughput multiplexing, and determination of masked mycotoxins, including stereoisomeric degradation products.

Sensitivity of photoelctrocehmical aptasensor using spiral nanorods for detecting antiobiotic levels in experimental and real samples

Given increasing concern regarding antibiotic environmental contamination, there is immediate need to monitor antibiotic levels to effectively control pollution. In this study, we used a photoelectrochemical aptasensor based on TiO₂@MoS₂ spiral nanoarrays to detect chloramphenicol (CAP) in antibiotics. Nanoarrays were directly grown on fluorine-doped tin oxide (FTO) conductive glass with excellent biochemical stability, while aptamer-SH were immobilized by chemical binding on a synthetic TiO₂@MoS₂ nanoarray. Results show that the photocurrents were reduced in the presence of photoelectrochemistry associated with specific selection of aptamer for CAP. When the measurement of the fabricated nanomaterial chip was carried out using a three-electrode system, we found a highly specific and stable detection of chloramphenicol that ranged between 0.1 pM and 1 μM, with the detection limit of 0.1 pM. In addition, we obtained satisfactory results when real sample were used to validate the potential of photoelectrochemical (PEC) aptasensor for detecting chloramphenicol content in milk. Our results demonstrate that photoelectrochemical aptasensor is conducive to the development of less toxic multifunctional nanomaterials, making the biosensor more robust and environmentally friendly. Therefore, photoelectrochemical aptasensor can be widely applied in the field of environmental monitoring.

A sensitive immunosensor based on graphene-PAMAM composites for rapid detection of the CP4-EPSPS protein in genetically modified crops

A simple electrochemical immunosensor based on nitrogen-doped graphene and polyamide-amine (GN-PAM) composites was proposed for the detection of the CP4-EPSPS protein in genetically modified (GM) crops. In this immunosensor, the amplification of the detection signal was realized through antibodies labeled with gold nanoparticles (AuNPs). The electrochemical responses of the immunosensor were linear (R2 = 0.9935 and 0.9912) when the GM soybean RRS and maize NK603 content ranged from 0.025% to 1.0% and 0.05% to 1.5%, respectively. The limits of detection for the GM soybean RRS and maize NK603 were as low as 0.01% and 0.03%, respectively. The immunosensor also exhibited high specificity, and satisfactory stability, reproducibility, and accuracy. Our findings indicated that the constructed immunosensor provides a new approach for the sensitive detection of the CP4-EPSPS protein. Notably, the sensor may be applied to other proteins or pathogenic bacteria by simply changing the antibodies, and may also be used for multi-component analysis.

Recent advances in immunoassays and biosensors for mycotoxins detection in feedstuffs and foods

Mycotoxins are secondary metabolites produced by fungus. Many mycotoxin species are highly toxic and are frequently found in cereals and feedstuffs. So, powerful detection methods are vital and effective ways to prevent feed contamination. Traditional detection methods can no longer meet the needs of massive, real-time, simple, and fast mycotoxin monitoring. Rapid detection methods based on advanced material and sensor technology are the future trend. In this review, we highlight recent progress of mycotoxin rapid detection strategies in feedstuffs and foods, especially for simultaneous multiplex mycotoxin determination. Immunoassays, biosensors, and the prominent roles of nanomaterials are introduced. The principles of different types of recognition and signal transduction are explained, and the merits and pitfalls of these methods are compared. Furthermore, limitations and challenges of existing rapid sensing strategies and perspectives of future research are discussed.

A MoS2 platform and thionine-carbon nanodots for sensitive and selective detection of pathogens

This work focuses on the combination of molybdenum disulfide (MoS₂) and à la carte functionalized carbon nanodots (CNDs) for the development of DNA biosensors for selective and sensitive detection of pathogens. MoS₂ flakes prepared through liquid-phase exfoliation, serves as platform for thiolated DNA probe immobilization, while thionine functionalized carbon nanodots (Thi-CNDs) are used as electrochemical indicator of the hybridization event. Spectroscopic and electrochemical studies confirmed the interaction of Thi-CNDs with DNA. As an illustration of the pathogen biosensor functioning, DNA sequences from InIA gen of Listeria monocytogenes bacteria and open reading frame sequence (ORF1ab) of SARS-CoV-2 virus were detected and quantified with a detection limit of 67.0 fM and 1.01 pM, respectively. Given the paradigmatic selectivity of the DNA hybridization, this approach allows pathogen detection in the presence of other pathogens, demonstrated by the detection of Listeria monocytogenes in presence of Escherichia coli. We note that this design is in principle amenable to any pathogen for which the DNA has been sequenced, including other viruses and bacteria. As example of the application of the method in real samples it has been used to directly detect Listeria monocytogenes in cultures without any DNA Polymerase Chain Reaction (PCR) amplification process.

A novel ratiometric electrochemical sensor for the selective detection of citrinin based on molecularly imprinted poly(thionine) on ionic liquid decorated boron and nitrogen co-doped hierarchical porous carbon

Citrinin can cause serious human diseases, thus its detection in foods is necessary. Herein, a molecularly imprinted polymer-based ratiometric electrochemical sensor (MIP-RECS) was presented for citrinin detection. The sensor was fabricated by electropolymerization, using thionine as monomer and citrinin as template. The ionic liquid decorated boron and nitrogen co-doped hierarchical porous carbon (BN-HPC) as supporter, provided large surface for anchoring thionine and citrinin. Poly(thionine) not only acted as MIP, but also acted as reference probe. When [Fe(CN)₆] ^3-/4- was adopted as indicating probe, the resulting sensor demonstrated a wide linear detection range (i.e. 1 × 10^-3-10 ng mL^-1) and a low detection limit (i.e. 1 × 10^-4 ng mL^-1).The sensor was applied to the detection of spiked citrinin in real samples, and satisfactory recovery (i.e. 97% - 110%) was obtained. Hence, it was promising for citrinin detection.

Food additives: From functions to analytical methods

Food additives refer to all kinds of trace substances used in food or food processing to preserve flavor or enhance food taste, appearance, or other qualities. At present, artificial synthetic food additives have gradually replaced the natural food additives and many problems related to food additives, involving the abuse of food additives, excessive additives or even toxic additives. Obviously, food additives can bring people great sensory enjoyment and commercial convenience, but they may also cause potential risks to human health. So, it is of high significance to conduct quantitative analysis on the content of food additives. According to their functions and the regulatory requirements of food additives, this review starts from the classification and structures of various food additives involving colorants, preservatives, antioxidants, sweeteners, emulsifiers, stabilizers, thickeners, gelling agents. It then summarizes and discusses analytical methods for quantification of food additives including modern immunoassays and other biotechnological methods. The proposed review aspires to fill in the knowledge gap of food additives between academia and industry by covering all kinds of analytical methods for quantifying food additives.

Recent advances on TMDCs for medical diagnosis

Transition metal dichalcogenides (TMDCs), such as MoS₂ and WS₂, have attracted much attention in biosensing and bioimaging due to its excellent stability, biocompatibility, high specific surface area, and wide varieties. In this review, we overviewed the application of TMDCs in biosensing and bioimaging. Firstly, the synthesis methods and surface functionalization methods of TMDCs were summarized. Secondly, according to the working mechanism, we classified and gave a detailed account of the latest research progress of TMDC-based biosensing for the detection of the enzyme, DNA, and other biological molecules. Then, we outlined the recent progress of applying TMDCs in bio-imaging, including fluorescence, X-ray computed tomographic, magnetic response imaging, photographic and multimodal imaging, respectively. Finally, we discussed the future challenges and development direction of the application of TMDCs in medical diagnosis. Also, we put forward our view on the opportunity of TMDCs in the big data of modern medical diagnosis.

Electroactive polypyrrole-molybdenum disulfide nanocomposite for ultrasensitive detection of berberine in rat plasma

Electroactive polypyrrole-molybdenum disulfide (MoP) nanocomposites were synthesized and used for modifying screen-printed carbon electrodes (SPCEs) for ultrasensitive detection of berberine, an anticancer drug, in rat plasma. The electroactive nanocomposites were fabricated by exfoliating MoS₂ followed by pyrrole polymerization. The effect of polypyrrole in the MoP nanocomposite was evaluated by varying the pyrrole concentration during polymerization, and the resulting nanocomposites prepared with pyrrole concentrations of 10, 20, 30 μL were named as MoP-1, MoP-2, and MoP-3, respectively. The electrochemical characterization of the three MoP nanocomposite sensors revealed that MoP-2/SPCE exhibited the highest electroactivity. The detection of berberine by the three MoP-coated SPCEs revealed that MoP-2/SPCE exhibited the highest activity against berberine due to a two-electron transfer mechanism on the MoP-2/SPCE electrode surface. The detection limit of berberine using the MoP-2/SPCE sensor was found to be about 0.05 μM, which is remarkably lower than the reported detection limits. The interference study proved the selectivity of the MoP-2/SPCE sensor toward berberine in the presence of other bioactive molecules and metal ions. The designed MoP-2/SPCE sensor retained 92% of its initial activity after 15 days of storage at room temperature, with RSD values of about 2.95% and 3.68% for the repeatability and reproducibility studies. Finally, the detection limit of berberine in a rat plasma sample determined using the MoP-2/SPCE sensor was found to be about 5 μM.

Ionic liquid assisted molecular self-assemble and molecular imprinting on gold nanoparticles decorated boron-doped ordered mesoporous carbon for the detection of zearalenone

Accurate and early diagnosis of zearalenone (ZEN) is particularly significant to the food safety. Herein, we propose an ionic liquid assisted self-assembly molecular imprinting strategy for ZEN based on ionic liquid functionalized boron-doped ordered mesoporous carbon -gold nanoparticles composite (BOMC-IL-Au NPs). During the composite synthesis, increased well-dispersed and uniform Au NPs are deposited on the surface of IL modified BOMC, due to the strong electrostatic interaction between AuCl₄^- and positively charged IL. For molecular imprinting, the BOMC-IL-Au NPs/GCE is immersed into p-aminothiophenol (p-ATP) solution and template solution in turn. Thus, the mercapto group contained p-ATP self-assembles on the Au NPs. Subsequently, the template molecules self-assemble onto the composite to form dense template layer, because of the hydrophobic interaction, π-π and hydrogen bond between template and IL/or p-ATP. After electropolymerization, the template layer is embedded into the p-ATP polymer membrane and produces lots of imprinting sites. Hence, the obtained sensor exhibits high sensitivity and selectivity. Under the optimal conditions, zearalenone can be quantified from 5 × 10^-4 to 1 ng mL^-1 with the low detection limit of 1 × 10^-4 ng mL^-1, by using [Fe(CN)₆]^3-/4- probe and square wave voltammetry. This strategy can also be employed to construct sensors for the detection of other substances.

Human Biomonitoring of Mycotoxins in Blood, Plasma and Serum in Recent Years: A Review

This manuscript reviews the state-of-the-art regarding human biological monitoring (HBM) of mycotoxins in plasma serum and blood samples. After a comprehensive and systematic literature review, with a focus on the last five years, several aspects were analyzed and summarized: a) the biomarkers analyzed and their encountered levels, b) the analytical methodologies developed and c) the relationship between biomarker levels and some illnesses. In the literature reviewed, aflatoxin B1-lysine (AFB1-lys) and ochratoxin A (OTA) in plasma and serum were the most widely studied mycotoxin biomarkers for HBM. Regarding analytical methodologies, a clear increase in the development of methods for the simultaneous determination of multiple mycotoxins has been observed. For this purpose, the use of liquid chromatography (LC) methodologies, especially when coupled with tandem mass spectrometry (MS/MS) or high resolution mass spectrometry (HRMS), has grown. A high percentage of the samples analyzed for OTA or aflatoxin B1 (mostly as AFB1-lys) in the reviewed papers were positive, demonstrating human exposure to mycotoxins. This review confirms the importance of mycotoxin human biomonitoring and highlights the important challenges that should be faced, such as the inclusion of other mycotoxins in HBM programs, the need to increase knowledge of mycotoxin metabolism and toxicokinetics, and the need for reference materials and new methodologies for treating samples. In addition, guidelines are required for analytical method validation, as well as equations to establish the relationship between human fluid levels and mycotoxin intake.

Two-Dimensional Layered Nanomaterial-Based Electrochemical Biosensors for Detecting Microbial Toxins

Toxin detection is an important issue in numerous fields, such as agriculture/food safety, environmental monitoring, and homeland security. During the past two decades, nanotechnology has been extensively used to develop various biosensors for achieving fast, sensitive, selective and on-site analysis of toxins. In particular, the two dimensional layered (2D) nanomaterials (such as graphene and transition metal dichalcogenides (TMDs)) and their nanocomposites have been employed as label and/or biosensing transducers to construct electrochemical biosensors for cost-effective detection of toxins with high sensitivity and specificity. This is because the 2D nanomaterials have good electrical conductivity and a large surface area with plenty of active groups for conjugating 2D nanomaterials with the antibodies and/or aptamers of the targeted toxins. Herein, we summarize recent developments in the application of 2D nanomaterial-based electrochemical biosensors for detecting toxins with a particular focus on microbial toxins including bacterial toxins, fungal toxins and algal toxins. The integration of 2D nanomaterials with some existing antibody/aptamer technologies into electrochemical biosensors has led to an unprecedented impact on improving the assaying performance of microbial toxins, and has shown great promise in public health and environmental protection.

Dual-target electrochemical aptasensor based on co-reduced molybdenum disulfide and Au NPs (rMoS2-Au) for multiplex detection of mycotoxins

Multiple mycotoxin contamination has posed health risks in the area of food safety. In this study, co-reduced molybdenum disulfide and gold nanoparticles (rMoS₂-Au) were designed and used for the first time as an efficient platform endowing electrochemical electrodes with superior electron transfer rates, large surface areas and strong abilities to firmly couple with large amounts of different aptamers. After further modification with thionine (Thi) and 6-(Ferrocenyl) hexanethiol (FC6S), a platform enabling sensitive, selective and simultaneous determination of two important mycotoxins, zearalenone (ZEN) and fumonisin B1 (FB1), was achieved. The established aptasensor showed excellent linear relationships (R² > 0.99) when ZEN and FB1 concentrations were in the range of 1 × 10^-3-10 ng mL^-1 and 1 × 10^-3-1 × 10² ng mL^-1, respectively. High sensitivity of ZEN and FB1 with a limit of detection as low as 5 × 10^-4 ng mL^-1 was obtained with excellent selectivity and stability. The effectiveness of the aptasensor was verified in real maize samples, and satisfactory recoveries were attained. The established platform could be easily expanded to other aptamer-based multiplex screening protocols in biochemical research and clinical diagnosis.

A label-free immunosensor based on PtPd NCs@MoS2 nanoenzymes for hepatitis B surface antigen detection

Nowadays, nanomaterials with enzymatic properties have aroused wide interest because of their special advantages, such as catalytic activity, simple preparation method and high stability. We introduced new nanoenzymes to a label-free electrochemical immunosensor for Hepatitis B surface antigen (HBs Ag) detection. In this study, PtPd nanocubes@MoS₂ nanoenzymes (PtPd NCs@MoS₂) were prepared by loading PtPd nanocubes (PtPd NCs) on molybdenum disulfide nano-sheet (MoS₂) through in situ redox polymerization. The prepared nanoenzymes exhibited enhanced peroxidase-like activity than separate MoS₂ and PtPd NCs. The catalytic process of PtPd NCs@MoS₂ is in agreement with the Michaelis-Menten kinetic equation. PtPd NCs@MoS₂ were used for sensitive detection of HBs Ag, which is ascribed to their superior peroxidase activity, good conductivity and high specific surface area and synergistic amplification for current signals. Compared with the detection limit of colorimetric method (3.3 pg/mL), the electrochemical method (10.2 fg/mL) shows a lower detection limit and a wider linear range from 32 fg/mL to 100 ng/mL, so it is more suitable for quantitative analysis of Hepatitis B. In summary, the prepared immunosensor provides a better opportunity for early diagnosis of Hepatitis B and also has further applications in biosensing and medical diagnostics.