1
|
He Y, Zhou J, Zhang J, Guo Y, Ji Z, Chen H, Fu Y. Monitoring Gene Sequences of Staphylococcus aureus Using a Love-Mode Surface Acoustic Wave Biosensor Coated with Cellulose Acetate/Polyethylenimine Nanofibers and Au Nanoparticles. ACS Sens 2024. [PMID: 39373016 DOI: 10.1021/acssensors.4c01949] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/08/2024]
Abstract
Love-mode surface acoustic wave (SAW) sensors show great promise for biodetection applications owing to their low cost, digital output, and wireless passive capability, but their performance is often restricted by the availability of suitable sensitive membrane layers. Herein, a composite layer of electrospun fibers made from cellulose acetate and polyethylenimine, coated with gold nanoparticles, is proposed as a porous and sensitive membrane coated onto a love-mode SAW biosensor for monitoring gene sequences of Staphylococcus aureus. The results showed that the developed sensor exhibited an impressive sensitivity of 122.56 Hz/(nmol/L) for detecting gene sequences of S. aureus, surpassing the sensitivity of conventional SAW sensors employing a bare Au film as the sensitive layer by 5-fold. The analysis revealed a remarkably linear detection (R2 of 0.97827) of S. aureus gene sequences within the range of 0 to 100 nmol/L. The limit of detection was impressively low at 0.9116 nmol/L. The good stability and specificity of the biosensor in liquid environments were demonstrated for clinical diagnostics.
Collapse
Affiliation(s)
- Yahui He
- College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China
| | - Jian Zhou
- College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China
| | - Jinbo Zhang
- College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China
| | - Yihao Guo
- College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China
| | - Zhangbin Ji
- College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China
| | - Hui Chen
- College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China
| | - Yongqing Fu
- Faculty of Engineering and Environment, Northumbria University, Newcastle upon Tyne NE1 8ST, United Kingdom
| |
Collapse
|
2
|
Kalita N, Gogoi S, Minteer SD, Goswami P. Advances in Bioelectrode Design for Developing Electrochemical Biosensors. ACS MEASUREMENT SCIENCE AU 2023; 3:404-433. [PMID: 38145027 PMCID: PMC10740130 DOI: 10.1021/acsmeasuresciau.3c00034] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/01/2023] [Revised: 09/26/2023] [Accepted: 09/27/2023] [Indexed: 12/26/2023]
Abstract
The critical performance factors such as selectivity, sensitivity, operational and storage stability, and response time of electrochemical biosensors are governed mainly by the function of their key component, the bioelectrode. Suitable design and fabrication strategies of the bioelectrode interface are essential for realizing the requisite performance of the biosensors for their practical utility. A multifaceted attempt to achieve this goal is visible from the vast literature exploring effective strategies for preparing, immobilizing, and stabilizing biorecognition elements on the electrode surface and efficient transduction of biochemical signals into electrical ones (i.e., current, voltage, and impedance) through the bioelectrode interface with the aid of advanced materials and techniques. The commercial success of biosensors in modern society is also increasingly influenced by their size (and hence portability), multiplexing capability, and coupling in the interface of the wireless communication technology, which facilitates quick data transfer and linked decision-making processes in real-time in different areas such as healthcare, agriculture, food, and environmental applications. Therefore, fabrication of the bioelectrode involves careful selection and control of several parameters, including biorecognition elements, electrode materials, shape and size of the electrode, detection principles, and various fabrication strategies, including microscale and printing technologies. This review discusses recent trends in bioelectrode designs and fabrications for developing electrochemical biosensors. The discussions have been delineated into the types of biorecognition elements and their immobilization strategies, signal transduction approaches, commonly used advanced materials for electrode fabrication and techniques for fabricating the bioelectrodes, and device integration with modern electronic communication technology for developing electrochemical biosensors of commercial interest.
Collapse
Affiliation(s)
- Nabajyoti Kalita
- Department
of Biosciences and Bioengineering, Indian
Institute of Technology Guwahati, Guwahati, Assam 781039, India
| | - Sudarshan Gogoi
- Department
of Chemistry, Sadiya College, Chapakhowa, Assam 786157, India
| | - Shelley D. Minteer
- Department
of Chemistry, University of Utah, 315 S 1400 E, Salt Lake City, Utah 84112, United States
- Kummer
Institute Center for Resource Sustainability, Missouri University of Science and Technology, Rolla, Missouri 65409, United States
| | - Pranab Goswami
- Department
of Biosciences and Bioengineering, Indian
Institute of Technology Guwahati, Guwahati, Assam 781039, India
| |
Collapse
|
3
|
Goswami PP, Bonam S, Jeyaram K, Singh SG. Device-Physics Realization of ZnO-MWCNT Nanostructure-Based Field-Effect Biosensor for Ultrasensitive Simultaneous Genomic Detection of Foodborne Pathogens. Anal Chem 2023; 95:14695-14701. [PMID: 37727978 DOI: 10.1021/acs.analchem.3c02786] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 09/21/2023]
Abstract
The complex and versatile interactions among the wide variety of the nanostructures and the target analytes have primarily limited the detailed investigation of the transduction mechanism of nanomaterial-assisted electrical signal-based biosensors despite their high sensitivity, low-cost, portability, and ease of deployment. Hence, no common ground is formed detailing the principle of operation, demanding a strong need for systematic examination instead of hit and trial. Therefore, a maiden mechanistic investigation has been carried out in this paper for a field-effect-based biosensor device relying on the energy band diagram and the surface potential profile. To demonstrate the experimental evidence and appreciate the importance of food safety, three hazardous foodborne pathogens (Proteus mirabilis, Escherichia coli, and Clostridium botulinum) have been detected herein. The biosensor device, built on a hydrothermally synthesized zinc oxide and MWCNT (ZnO-MWCNT) composite nanostructure, simultaneously incorporates three fairly specific ss-DNA probes. Furthermore, the unmet challenge of biosensor device variability is addressed through the optimum selection of operating voltage of the device via a unique "voltage-selection-algorithm". We believe that the rigorous experimentation and the insightful device-physics realization demonstrated in this work will pave the way for a future decisive biosensor platform.
Collapse
Affiliation(s)
- Partha Pratim Goswami
- Department of Electrical Engineering, Indian Institute of Technology, Hyderabad, Telangana 502285, India
| | - Satish Bonam
- Department of Electrical Engineering, Indian Institute of Technology, Hyderabad, Telangana 502285, India
| | - Kumaraswamy Jeyaram
- Institute of Bioresources and Sustainable Development (IBSD), Regional Centre, Gangtok, Sikkim 737102, India
| | - Shiv Govind Singh
- Department of Electrical Engineering, Indian Institute of Technology, Hyderabad, Telangana 502285, India
| |
Collapse
|
4
|
Supraja P, Tripathy S, Govind Singh S. Smartphone-powered, ultrasensitive, and selective, portable and stable multi-analyte chemiresistive immunosensing platform with PPY/COOH-MWCNT as bioelectrical transducer: Towards point-of-care TBI diagnosis. Bioelectrochemistry 2023; 151:108391. [PMID: 36805206 DOI: 10.1016/j.bioelechem.2023.108391] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/18/2022] [Revised: 12/24/2022] [Accepted: 01/27/2023] [Indexed: 02/11/2023]
Abstract
Traumatic Brain Injury, one of the significant causes of mortality and morbidity, affects worldwide and continues to be a diagnostic challenge. The most desirable and partially met clinical need is to simultaneously detect the disease-specific-biomarkers in a broad range of readily available body fluids on a single platform with a rapid, low-cost, ultrasensitive and selective device. Towards this, an array of interdigitated microelectrodes was fabricated on commercially existing low-cost single-side copper cladded printed-circuit-board substrate followed by the bioelectrodes preparation through covalent immobilization of brain injury specific biomarkers on carboxylic functionalized multi-walled carbon nanotubes embedded polypyrrole nanocomposite modified interdigitated microelectrodes. Subsequently, the immunological binding events were transduced as the normalized change in bioelectrode resistance with and without the target analyte via current-voltage analysis. As proof of concept, current-voltage responses were primarily recorded using a conventional probe station, and later, a portable handheld-electronic-readout was developed for the point-of-care application. The data compilation and analysis were carried out using the in-house developed android-based mobile app. Notably, the smartphone powered the readout through a PL-2303 serial connector, avoiding integrating power sources with the readout. Further, this technology can be adapted to other point-of-care biosensing applications.
Collapse
Affiliation(s)
- Patta Supraja
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, 502285, India.
| | - Suryasnata Tripathy
- Department of Electronics and Communication Engineering, Indian Institute of Information Technology Surat, 395007, India.
| | - Shiv Govind Singh
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, 502285, India.
| |
Collapse
|
5
|
Goswami PP, Deshpande T, Rotake DR, Singh SG. Near perfect classification of cardiac biomarker Troponin-I in human serum assisted by SnS2-CNT composite, explainable ML, and operating-voltage-selection-algorithm. Biosens Bioelectron 2022; 220:114915. [DOI: 10.1016/j.bios.2022.114915] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/17/2022] [Revised: 11/03/2022] [Accepted: 11/12/2022] [Indexed: 11/16/2022]
|
6
|
Supraja P, Tripathy S, Krishna Vanjari SR, Singh SG. Label-free, ultrasensitive and rapid detection of FDA-approved TBI specific UCHL1 biomarker in plasma using MWCNT-PPY nanocomposite as bio-electrical transducer: A step closer to point-of-care diagnosis of TBI. Biosens Bioelectron 2022; 216:114631. [PMID: 35973277 DOI: 10.1016/j.bios.2022.114631] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2022] [Revised: 08/05/2022] [Accepted: 08/07/2022] [Indexed: 11/02/2022]
Abstract
Traumatic Brain Injury (TBI), a major cause of mortality and neurological disability affecting people of all ages worldwide, remains a diagnostic and therapeutic challenge to date. Rapid, ultra-sensitive, selective, and wide-range detection of TBI biomarkers in easily accessible body fluids is an unmet clinical need. Considering this, in this work, we report the design and development of a facile, label-free, highly stable and sensitive, chemi-impedance-based sensing platform for rapid and wide range detection of Ubiquitin-carboxy terminal hydrolase L1 (UCHL1: FDA-approved TBI specific plasma biomarker), using carboxylic functionalized MWCNTs embedded polypyrrole (PPY) nanocomposites (PPY/f-MWCNT). The said nanocomposites were synthesized using chemical oxidative polymerization method. Herein, the functionalized MWCNTs are used as conducting fillers so as to increase the polymer's dielectric constant according to the micro-capacitor model, thereby augmenting both DC electrical conductivity and AC dielectric property of the nanocomposite. The proposed immunosensing platform comprises of PPY/f-MWCNT modified interdigitated microelectrode (IDμEs) array, on which anti-UCHL1-antibodies are immobilized using suitable covalent chemistry. The AC electrical characterization of the nanocomposite modified IDμEs, with and without the antibodies, was performed through generic capacitance vs. frequency (C-F, 1 KHz - 1 MHz) and capacitance vs. applied bias (C-V, 0.1 V-1 V) measurements, using an Agilent B1500A parametric analyzer. The binding event of UCHL1 peptides to anti-UCHL1-antibodies was transduced in terms of normalised changes in parallel capacitance, via the C-F analysis. Further, we have tested the detection efficiency of the said immunoassay against UCHL1 spiked human plasma samples in the concentration range 10 fg/mL - 1 μg/mL. The proposed sensing platform detected UCHL1 in spiked-plasma samples linearly in the range of 10 fg/mL - 1 ng/mL with a sensitivity and LoD of 4.22 ((ΔC/C0)/ng.mL-1)/cm2 and 0.363 fg/mL, respectively. Further, it showed excellent stability (30 weeks), repeatability, reproducibility, selectivity and interference-resistance. The proposed approach is label-free, and if desired, can be used in conjunction with DC measurements, for biosensing applications.
Collapse
Affiliation(s)
- Patta Supraja
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, 502285, India.
| | - Suryasnata Tripathy
- Department of Electronics and Communication Engineering, Indian Institute of Information Technology Surat, 395007, India.
| | | | - Shiv Govind Singh
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, 502285, India.
| |
Collapse
|
7
|
Impact of Surface Area on Sensitivity in Autonomously Reporting Sensing Hydrogel Nanomaterials for the Detection of Bacterial Enzymes. CHEMOSENSORS 2022. [DOI: 10.3390/chemosensors10080299] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
The rapid and selective detection of bacterial contaminations and bacterial infections in a non-laboratory setting using advanced sensing materials holds the promise to enable robust point-of-care tests and rapid diagnostics for applications in the medical field as well as food safety. Among the various possible analytes, bacterial enzymes have been targeted successfully in various sensing formats. In this current work, we focus on the systematic investigation of the role of surface area on the sensitivity in micro- and nanostructured autonomously reporting sensing hydrogel materials for the detection of bacterial enzymes. The colorimetric sensing materials for the detection of β-glucuronidase (ß-GUS) from Escherichia coli (E. coli) were fabricated by template replication of crosslinked pullulan acetoacetate (PUAA) and by electrospinning chitosan/polyethylene oxide nanofibers (CS/PEO NFs), both equipped with the chromogenic substrate 5-bromo-4-chloro-3-indolyl-β-D-glucuronide. The investigation of the dependence of the initial reaction rates on surface area unveiled a linear relationship of rate and thereby time to observe a signal for a given concentration of bacterial enzyme. This knowledge was exploited in nanoscale sensing materials made of CS/PEO NFs with diameters of 295 ± 100 nm. Compared to bulk hydrogel slabs, the rate of hydrolysis was significantly enhanced in NFs when exposed to bacteria suspension cultures and thus ensuring a rapid detection of living E. coli that produces the enzyme β-GUS. The findings afford generalized design principles for the improvement of known and novel sensing materials towards rapid detection of bacteria by nanostructuring in medical and food related settings.
Collapse
|
8
|
Ekrami E, Khodabandeh Shahraky M, Mahmoudifard M, Mirtaleb MS, Shariati P. Biomedical applications of electrospun nanofibers in industrial world: a review. INT J POLYM MATER PO 2022. [DOI: 10.1080/00914037.2022.2032705] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
Affiliation(s)
- Elena Ekrami
- Bioprocess Engineering Research Group, Institute of Industrial and Environmental Biotechnology (IIEB), National Institute of Genetic Engineering and Biotechnology (NIGEB), Tehran, Iran
| | - Mahvash Khodabandeh Shahraky
- Bioprocess Engineering Research Group, Institute of Industrial and Environmental Biotechnology (IIEB), National Institute of Genetic Engineering and Biotechnology (NIGEB), Tehran, Iran
| | - Matin Mahmoudifard
- Bioprocess Engineering Research Group, Institute of Industrial and Environmental Biotechnology (IIEB), National Institute of Genetic Engineering and Biotechnology (NIGEB), Tehran, Iran
| | - Mona Sadat Mirtaleb
- Bioprocess Engineering Research Group, Institute of Industrial and Environmental Biotechnology (IIEB), National Institute of Genetic Engineering and Biotechnology (NIGEB), Tehran, Iran
| | - Parvin Shariati
- Bioprocess Engineering Research Group, Institute of Industrial and Environmental Biotechnology (IIEB), National Institute of Genetic Engineering and Biotechnology (NIGEB), Tehran, Iran
| |
Collapse
|
9
|
Dual-labeling ratiometric electrochemical strategy initiated with ISDPR for accurate screening MecA gene. Biosens Bioelectron 2022; 197:113772. [PMID: 34768067 DOI: 10.1016/j.bios.2021.113772] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/27/2021] [Revised: 11/01/2021] [Accepted: 11/03/2021] [Indexed: 12/30/2022]
Abstract
An outstanding dual-labeling ratiometric electrochemical biosensor based on isothermal strand displacement polymerization reaction (ISDPR) for highly sensitive and selective detection of mecA gene has been proposed. Concretely, in the presence of mecA gene, the addition of methylene blue (MB)-labeled primer and polymerase induced recycling amplification to change the structure of the ferrocene (Fc)-labeled hairpin probe, thereby releasing abundant target gene to realize the signal amplification and dual-signal output. Through this process, the electrochemical responses of Fc (IFc) and MB (IMB) were both substantially reduced and increased proportionally, ensuring that the value of IMB/IFc can accurately reflect the true detection level of mecA gene. Benefiting from the "signal-on/off" strategy, the fabricated biosensor exhibited outstanding sequence specificity to discriminate mismatched mecA gene, which verified to be 2.72 times that of single-label detection for perfect match/single base mismatch (PM/MM) discrimination ratio. This strategy effectively integrated the advantages of signal amplification and ratiometric modes, making the biosensor exhibit a broad working range with 10 fM - 3000 pM and a limit of detection (LOD) with 3.33 fM (S/N = 3). Moreover, the proposed biosensor has good feasibility for mecA gene determination in water samples due to acceptable recoveries (95-115%) and repeatability relative standard deviations (RSD) value of 4%. This will provide a powerful sensing platform for improving accuracy and decreasing background signal of sensor for ARGs screening in environmental monitoring.
Collapse
|
10
|
Tripathy S, Supraja P, Mohanty S, Sai VM, Agrawal T, Chowdary CG, Taranikanti M, Bandaru R, Mudunuru AK, Tadi LJ, Suravaram S, Siddiqui IA, Maddur S, Guntuka RK, Singh R, Singh V, Singh SG. Artificial Intelligence-Based Portable Bioelectronics Platform for SARS-CoV-2 Diagnosis with Multi-nucleotide Probe Assay for Clinical Decisions. Anal Chem 2021; 93:14955-14965. [PMID: 34694783 DOI: 10.1021/acs.analchem.1c01650] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/08/2023]
Abstract
In the context of the recent pandemic, the necessity of inexpensive and easily accessible rapid-test kits is well understood and need not be stressed further. In light of this, we report a multi-nucleotide probe-based diagnosis of SARS-CoV-2 using a bioelectronics platform, comprising low-cost chemiresistive biochips, a portable electronic readout, and an Android application for data acquisition with machine-learning-based decision making. The platform performs the desired diagnosis from standard nasopharyngeal and/or oral swabs (both on extracted and non-extracted RNA samples) without amplifying the viral load. Being a reverse transcription polymerase chain reaction-free hybridization assay, the proposed approach offers inexpensive, fast (time-to-result: ≤ 30 min), and early diagnosis, as opposed to most of the existing SARS-CoV-2 diagnosis protocols recommended by the WHO. For the extracted RNA samples, the assay accounts for 87 and 95.2% test accuracies, using a heuristic approach and a machine-learning-based classification method, respectively. In case of the non-extracted RNA samples, 95.6% decision accuracy is achieved using the heuristic approach, with the machine-learning-based best-fit model producing 100% accuracy. Furthermore, the availability of the handheld readout and the Android application-based simple user interface facilitates easy accessibility and portable applications. Besides, by eliminating viral RNA extraction from samples as a pre-requisite for specific detection, the proposed approach presents itself as an ideal candidate for point-of-care SARS-CoV-2 diagnosis.
Collapse
Affiliation(s)
- Suryasnata Tripathy
- Indian Institute of Technology Hyderabad, Kandi, Sangareddy, Telangana 502285, India
| | - Patta Supraja
- Indian Institute of Technology Hyderabad, Kandi, Sangareddy, Telangana 502285, India
| | - Swati Mohanty
- Indian Institute of Technology Hyderabad, Kandi, Sangareddy, Telangana 502285, India
| | - Vallepu Mohan Sai
- Indian Institute of Technology Hyderabad, Kandi, Sangareddy, Telangana 502285, India
| | - Tushant Agrawal
- Indian Institute of Technology Hyderabad, Kandi, Sangareddy, Telangana 502285, India
| | | | - Madhuri Taranikanti
- All India Institute of Medical Sciences, Bibinagar, Hyderabad, Telangana 508126, India
| | - Rajiv Bandaru
- ESIC Medical College, S R Nagar, Hyderabad, Telangana 500038, India
| | | | - Lakshmi Jyothi Tadi
- All India Institute of Medical Sciences, Bibinagar, Hyderabad, Telangana 508126, India.,ESIC Medical College, S R Nagar, Hyderabad, Telangana 500038, India
| | - Swathi Suravaram
- ESIC Medical College, S R Nagar, Hyderabad, Telangana 500038, India
| | | | - Srinivas Maddur
- ESIC Medical College, S R Nagar, Hyderabad, Telangana 500038, India
| | | | - Ranjana Singh
- Indian Institute of Technology Hyderabad, Kandi, Sangareddy, Telangana 502285, India
| | - Vikrant Singh
- School of Medicine, University of California, 1 Shields Avenue, Davis, California 95616, United States
| | - Shiv Govind Singh
- Indian Institute of Technology Hyderabad, Kandi, Sangareddy, Telangana 502285, India
| |
Collapse
|
11
|
Supraja P, Tripathy S, Singh R, Singh V, Chaudhury G, Singh SG. Towards point-of-care diagnosis of Alzheimer's disease: Multi-analyte based portable chemiresistive platform for simultaneous detection of β-amyloid (1-40) and (1-42) in plasma. Biosens Bioelectron 2021; 186:113294. [PMID: 33971525 DOI: 10.1016/j.bios.2021.113294] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/07/2021] [Revised: 04/11/2021] [Accepted: 04/28/2021] [Indexed: 01/05/2023]
Abstract
Label-free simultaneous detection of Alzheimer's disease (AD) specific biomarkers Aβ40 and Aβ42 peptides on a single platform using polypyrrole nanoparticle-based chemiresistive biosensors is reported here. The proposed interdigitated-microelectrode based inexpensive multisensor-platform can concurrently detect Aβ40 and Aβ42 in spiked-plasma in the range of 10-14 - 10-6 g/mL (with LoDs being 5.71 and 9.09 fg/mL, respectively), enabling the estimation of diagnostically significant Aβ42/Aβ40 ratio. A detailed study has been undertaken here to record the individual sensor responses against spiked-plasma samples with varying amounts and proportions of the two target peptides, towards enabling disease-progression monitoring using the Aβ-ratio. As compared to the existing cost-ineffective brain-imaging techniques such as PET and MRI, and the high-risk CSF based invasive AD biomarkers detecting procedures, the proposed approach offers a viable alternative for affordable point-of-care AD diagnostics, with possible usage in performance evaluation of therapeutic drugs. Towards point-of-care applications, the portable readout used in this work was conjugated with an android-based mobile app for data-acquisition and analysis.
Collapse
Affiliation(s)
- Patta Supraja
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, 502285, India.
| | - Suryasnata Tripathy
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, 502285, India.
| | - Ranjana Singh
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, 502285, India.
| | - Vikrant Singh
- School of Medicine, University of California Davis, USA.
| | - Gajendranath Chaudhury
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, 502285, India.
| | - Shiv Govind Singh
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, 502285, India.
| |
Collapse
|
12
|
Misra R, Acharya S, Sushmitha N. Nanobiosensor-based diagnostic tools in viral infections: Special emphasis on Covid-19. Rev Med Virol 2021; 32:e2267. [PMID: 34164867 PMCID: PMC8420101 DOI: 10.1002/rmv.2267] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/29/2021] [Accepted: 06/10/2021] [Indexed: 01/09/2023]
Abstract
The rapid propagation of novel human coronavirus 2019 and its emergence as a pandemic raising morbidity calls for taking more appropriate measures for rapid improvement of present diagnostic techniques which are time‐consuming, labour‐intensive and non‐portable. In this scenario, biosensors can be considered as a means to outmatch customary techniques and deliver point‐of‐care diagnostics for many diseases in a much better way owing to their speed, cost‐effectiveness, accuracy, sensitivity and selectivity. Besides this, these biosensors have been aptly used to detect a wide spectrum of viruses thus facilitating timely delivery of correct therapy. The present review is an attempt to analyse such different kinds of biosensors that have been implemented for virus detection. Recently, the field of nanotechnology has given a great push to diagnostic techniques by the development of smart and miniaturised nanobiosensors which have enhanced the diagnostic procedure and taken it to a new level. The portability, hardiness and affordability of nanobiosensor make them an apt diagnostic agent for different kinds of viruses including SARS‐CoV‐2. The role of such novel nanobiosensors in the diagnosis of SARS‐CoV‐2 has also been addressed comprehensively in the present review. Along with this, the challenges and future position of developing such ultrasensitive nanobiosensors which should be taken into consideration before declaring these nano‐weapons as the ideal futuristic gold standard of diagnosis has also been accounted for here.
Collapse
Affiliation(s)
- Ranjita Misra
- Centre for Molecular and Nanomedical Sciences, Sathyabama Institute of Science and Technology, Chennai, Tamil Nadu, India
| | - Sarbari Acharya
- Department of Life Science, School of Applied Sciences, Kalinga Institute of Industrial Technology, Bhubaneswar, Odisha, India
| | - Nehru Sushmitha
- Centre for Molecular and Nanomedical Sciences, Sathyabama Institute of Science and Technology, Chennai, Tamil Nadu, India
| |
Collapse
|
13
|
Flores-Hernandez DR, Santamaria-Garcia VJ, Melchor-Martínez EM, Sosa-Hernández JE, Parra-Saldívar R, Bonilla-Rios J. Paper and Other Fibrous Materials-A Complete Platform for Biosensing Applications. BIOSENSORS 2021; 11:128. [PMID: 33919464 PMCID: PMC8143474 DOI: 10.3390/bios11050128] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/22/2021] [Revised: 04/02/2021] [Accepted: 04/06/2021] [Indexed: 01/22/2023]
Abstract
Paper-based analytical devices (PADs) and Electrospun Fiber-Based Biosensors (EFBs) have aroused the interest of the academy and industry due to their affordability, sensitivity, ease of use, robustness, being equipment-free, and deliverability to end-users. These features make them suitable to face the need for point-of-care (POC) diagnostics, monitoring, environmental, and quality food control applications. Our work introduces new and experienced researchers in the field to a practical guide for fibrous-based biosensors fabrication with insight into the chemical and physical interaction of fibrous materials with a wide variety of materials for functionalization and biofunctionalization purposes. This research also allows readers to compare classical and novel materials, fabrication techniques, immobilization methods, signal transduction, and readout. Moreover, the examined classical and alternative mathematical models provide a powerful tool for bioanalytical device designing for the multiple steps required in biosensing platforms. Finally, we aimed this research to comprise the current state of PADs and EFBs research and their future direction to offer the reader a full insight on this topic.
Collapse
Affiliation(s)
| | | | | | | | | | - Jaime Bonilla-Rios
- Escuela de Ingeniería y Ciencias, Tecnologico de Monterrey, Avenida Eugenio Garza Sada 2501, Monterrey 64849, NL, Mexico; (D.R.F.-H.); (V.J.S.-G.); (E.M.M.-M.); (J.E.S.-H.); (R.P.-S.)
| |
Collapse
|
14
|
Kumar S, Vasylieva N, Singh V, Hammock B, Singh SG. A facile, sensitive and rapid sensing platform based on CoZnO for detection of fipronil; an environmental toxin. ELECTROANAL 2021; 32:2056-2064. [PMID: 33456276 DOI: 10.1002/elan.202000051] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Abstract
A sensitive detection of extremely toxic phenylpyrazole insecticide, 'Fipronil' is presented. Currently, the advancement of approaches for the detection of insecticides at low concentrations with less time is important for environmental safety assurance. Considering this fact, an effort has been made to develop an electrospun CoZnO nanofiber (NF) based label-free electrochemical system for the detection of fipronil. The CoZnO NF were characterized using different techniques including field emission scanning electron microscopy (FE-SEM), Energy Dispersive X-Ray Analysis (EDX), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Raman Spectroscopy. Based on the experimental results, the proposed platform displayed a linear response for fipronil in the attogram/mL range despite the multiple interfering agents. The sensitivity of the device was found to be 3.99 Kῼ (g/ml)-1 cm-2. Limit of detection (LOD) and limit of quantification (LOQ) were calculated and found to be 112 ag mL-1 and 340 ag mL-1 respectively. Further, this proposed sensor will be implemented in the fields for the rapid and proficient detection of the real samples.
Collapse
Affiliation(s)
- Sanni Kumar
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, Telangana, India 502285
| | - Natalia Vasylieva
- Department of Entomology & Nematology, University of California, Davis, USA
| | - Vikrant Singh
- School of Medicine, University of California, Davis, USA
| | - Bruce Hammock
- Department of Entomology & Nematology, University of California, Davis, USA
| | - Shiv Govind Singh
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, Telangana, India 502285
| |
Collapse
|
15
|
Kumar S, Tripathy S, Singh OK, Singh SG. Cerium oxide nanofiber based electroanalytical sensor for TNF-α detection: Improved interfacial stability with Nafion. Bioelectrochemistry 2020; 138:107725. [PMID: 33360954 DOI: 10.1016/j.bioelechem.2020.107725] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/02/2020] [Revised: 11/23/2020] [Accepted: 12/10/2020] [Indexed: 12/26/2022]
Abstract
The present work is aimed at improving the adhesion of nanomaterials at the interface of solid state working electrodes. Towards this, herein, an efficient method has been proposed that requires the electrode interface to be decorated with an optimally thin layer of Nafion. This selectively permeable layer ensures the stability of the sensor interface, without hampering the transport of biomolecules and electrons. As a case study, here, electrospun Cerium oxide nanofiber (CeNF) modified Glassy carbon electrodes (GCE) have been used as the sensing interface, and stability and performance of the GCE/CeNF/Nafion interface is evaluated using analytical electrochemistry. The CeNF is synthesized via electrospinning and is characterized using X-ray diffraction spectroscopy, Thermal gravimetry, Fourier transform infrared spectroscopy, and Field emission scanning electron microscopy. Further, detection of sepsis specific biomarker TNF-α from spiked buffer samples is demonstrated, as a case study, towards evaluating the effect of Nafion on the interfacial sensitivity. The achieved LOD of GCE/CeNF and GCE/CeNF/Nafion for TNF-α detection were 2.8 fg/mL and 1.2 fg/mL, respectively. A comparative analysis between the Electrochemical impedance spectroscopic (EIS) results of the GCE/CeNF and the GCE/CeNF/Nafion interfaces confirms the improvement in stability, without affecting the sensitivity and the limiting detection.
Collapse
Affiliation(s)
- Sanni Kumar
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, Telangana 502285, India
| | - Suryasnata Tripathy
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, Telangana 502285, India
| | - Om Krishan Singh
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, Telangana 502285, India
| | - Shiv Govind Singh
- Department of Electrical Engineering, Indian Institute of Technology Hyderabad, Telangana 502285, India.
| |
Collapse
|
16
|
Berkenbrock JA, Grecco-Machado R, Achenbach S. Microfluidic devices for the detection of viruses: aspects of emergency fabrication during the COVID-19 pandemic and other outbreaks. Proc Math Phys Eng Sci 2020; 476:20200398. [PMID: 33363440 PMCID: PMC7735301 DOI: 10.1098/rspa.2020.0398] [Citation(s) in RCA: 21] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/19/2020] [Accepted: 10/05/2020] [Indexed: 12/17/2022] Open
Abstract
Extensive testing of populations against COVID-19 has been suggested as a game-changer quest to control the spread of this contagious disease and to avoid further disruption in our social, healthcare and economical systems. Nonetheless, testing millions of people for a new virus brings about quite a few challenges. The development of effective tests for the new coronavirus has become a worldwide task that relies on recent discoveries and lessons learned from past outbreaks. In this work, we review the most recent publications on microfluidics devices for the detection of viruses. The topics of discussion include different detection approaches, methods of signalling and fabrication techniques. Besides the miniaturization of traditional benchtop detection assays, approaches such as electrochemical analyses, field-effect transistors and resistive pulse sensors are considered. For emergency fabrication of quick test kits, the local capabilities must be evaluated, and the joint work of universities, industries, and governments seems to be an unequivocal necessity.
Collapse
Affiliation(s)
- José Alvim Berkenbrock
- Department of Electrical and Computer Engineering, University of Saskatchewan, Saskatoon, SK, Canada
| | - Rafaela Grecco-Machado
- Department of Anatomy, Physiology and Pharmacology, University of Saskatchewan, Saskatoon, SK, Canada
| | - Sven Achenbach
- Department of Electrical and Computer Engineering, University of Saskatchewan, Saskatoon, SK, Canada
| |
Collapse
|
17
|
Liu Y, Hao M, Chen Z, Liu L, Liu Y, Yang W, Ramakrishna S. A review on recent advances in application of electrospun nanofiber materials as biosensors. CURRENT OPINION IN BIOMEDICAL ENGINEERING 2020. [DOI: 10.1016/j.cobme.2020.02.001] [Citation(s) in RCA: 50] [Impact Index Per Article: 12.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023]
|