Porous carbon supported nanoceria derived from one step in situ pyrolysis of Jerusalem artichoke stalk for functionalization of solution-gated graphene transistors for real-time detection of lactic acid from cancer cell metabolism

Microbial synthesis of antimony sulfide to prepare catechol and hydroquinone electrochemical sensor by pyrolysis and carbonization

The application of antimony sulfide sensors, characterized by their exceptional stability and selectivity, is of emerging interest in detection research, and the integration of graphitized carbon materials is expected to further enhance their electrochemical performance. This study represents a pioneering effort in the synthesis of carbon-doped antimony sulfide materials through the pyrolysis of the mixture of microorganisms and their synthetic antimony sulfide. The prepared materials are subsequently applied to electrochemical sensors for monitoring the highly toxic compounds catechol (CC) and hydroquinone (HQ) in the environment. Via cyclic voltammetry (CV) and impedance testing, we concluded that the pyrolytic product at 700 °C (Sb-700) demonstrated the best electrochemical properties. Differential pulse voltammetry (DPV) revealed impressive separation when utilizing Sb-700/GCE for simultaneous detection of CC and HQ, exhibiting good linearity within the concentration range of 0.1-140 μM. The achieved sensitivities of 24.62 μA μM-1 cm-2 and 22.10 μA μM-1 cm-2 surpassed those of most CC and HQ electrochemical sensors. Meanwhile, the detection limits for CC and HQ were as low as 0.18 μM and 0.16 μM (S/N = 3), respectively. Additional tests confirmed the good selectivity, reproducibility, and long-term stability of Sb-700/GCE, which was effective in detecting CC and HQ in tap water and river water, with recovery rates of 100.7%-104.5% and 96.5%-101.4%, respectively. It provides a method that combines green microbial synthesis and simple pyrolysis for the preparation of electrode materials in CC and HQ electrochemical sensors, and also offers a new perspective for the application of microbial synthesized materials.

Advances in Biocarbon and Soft Material Assembly for Enthalpy Storage: Fundamentals, Mechanisms, and Multimodal Applications

High-value-added biomass materials like biocarbon are being actively pursued integrating them with soft materials in a broad range of advanced renewable energy technologies owing to their advantages, such as lightweight, relatively low-cost, diverse structural engineering applications, and high energy storage potential. Consequently, the hybrid integration of soft and biomass-derived materials shall store energy to mitigate intermittency issues, primarily through enthalpy storage during phase change. This paper introduces the recent advances in the development of natural biomaterial-derived carbon materials in soft material assembly and its applications in multidirectional renewable energy storage. Various emerging biocarbon materials (biochar, carbon fiber, graphene, nanoporous carbon nanosheets (2D), and carbon aerogel) with intrinsic structures and engineered designs for enhanced enthalpy storage and multimodal applications are discussed. The fundamental design approaches, working mechanisms, and feature applications, such as including thermal management and electromagnetic interference shielding, sensors, flexible electronics and transparent nanopaper, and environmental applications of biocarbon-based soft material composites are highlighted. Furthermore, the challenges and potential opportunities of biocarbon-based composites are identified, and prospects in biomaterial-based soft materials composites are presented.

Selective detection of Pb2+ ions based on a graphene field-effect transistor gated by DNAzymes in binding mode

Heavy metal contamination has become a severe threat to dairy products through contaminated feed and the environment water. Among them, Pb(II) is highly toxic to the human body even under minimal exposure. Therefore, establishing a fast and sensitive Pb2+ detection technology is significant for rapid screening of vast number of dairy products. Hererin, we report the development of a sensitive and selective Pb(II) biosensor based on a solution-gated graphene transistor (SGGT) with the gate modified by Pb2+-dependent DNAzyme probes. It has also been explored that the DNAzymes working in simple binding mode integrate better with the SGGT than those working in normal catalytic mode, showing significantly stronger channel current responses and lower detection limit down to 0.39 μg/L (or 1.9 nM). Finally, the biosensor was practicably applied to the detection of lead ions in pure milk samples with a high recovery rate. We believe that this work reveals the best strategy for integrating metal ion dependent DNAzyme probes with SGGT sensing platforms to selectively and sensitively detect many metal ions.

Overview of nanozymes with phosphatase-like activity

Nanomaterials with intrinsic enzyme activity, referred to as nanozymes, have attracted substantial attention in recent years. Among them, phosphatase-mimicking nanozymes have become an increasingly important focus for future research, considering that phosphatase is not only one of key enzymes for phosphorous metabolism, which is essential for many biological processes (e.g., cellular regulation and signaling), but also one of extensively used biocatalytic labels in the enzyme-linked assays as well as a powerful tool enzyme in molecular biology laboratories. Nevertheless, compared with extensive oxidoreductase-mimicking nanozymes, there are a very limited number of nanozymes with phosphatase-like activity have been explored at present. The increasing demand of complex and individualized phosphatase-involved catalytic behaviors is pushing the development of more advanced phosphatase-mimicking nanozymes. Thus, we present an overview on recently reported phosphatase-like nanozymes, providing guidelines and new insights for designing more advanced phosphatase-mimicking nanozyme with superior properties.

CNT and Graphene-Based Transistor Biosensors for Cancer Detection: A Review

An essential aspect of successful cancer diagnosis is the identification of malignant tumors during the early stages of development, as this can significantly diminish patient mortality rates and increase their chances of survival. This task is facilitated by cancer biomarkers, which play a crucial role in determining the stage of cancer cells, monitoring their growth, and evaluating the success of treatment. However, conventional cancer detection methods involve several intricate steps, such as time-consuming nucleic acid amplification, target detection, and a complex treatment process that may not be appropriate for rapid screening. Biosensors are emerging as promising diagnostic tools for detecting cancer, and carbon nanotube (CNT)- and graphene-based transistor biosensors have shown great potential due to their unique electrical and mechanical properties. These biosensors have high sensitivity and selectivity, allowing for the rapid detection of cancer biomarkers at low concentrations. This review article discusses recent advances in the development of CNT- and graphene-based transistor biosensors for cancer detection.

Functional Carbon from Nature: Biomass-Derived Carbon Materials and the Recent Progress of Their Applications

Biomass is considered as a promising source to fabricate functional carbon materials for its sustainability, low cost, and high carbon content. Biomass-derived-carbon materials (BCMs) have been a thriving research field. Novel structures, diverse synthesis methods, and versatile applications of BCMs have been reported. However, there has been no recent review of the numerous studies of different aspects of BCMs-related research. Therefore, this paper presents a comprehensive review that summarizes the progress of BCMs related research. Herein, typical types of biomass used to prepare BCMs are introduced. Variable structures of BCMs are summarized as the performance and properties of BCMs are closely related to their structures. Representative synthesis strategies, including both their merits and drawbacks are reviewed comprehensively. Moreover, the influence of synthetic conditions on the structure of as-prepared carbon products is discussed, providing important information for the rational design of the fabrication process of BCMs. Recent progress in versatile applications of BCMs based on their morphologies and physicochemical properties is reported. Finally, the remaining challenges of BCMs, are highlighted. Overall, this review provides a valuable overview of current knowledge and recent progress of BCMs, and it outlines directions for future research development of BCMs.

Lactate-Oxidase-Instructed Cancer Diagnosis and Therapy

Lactate oxidase (LOx) has attracted extensive interest in cancer diagnosis and therapy in recent years owing to its specific catalysis on l-lactate; its catalytic process consumes oxygen (O₂ ) and generates a large amount of hydrogen peroxide (H₂ O₂ ) and pyruvate. Given high levels of lactate in tumor tissues and its tight correlation with tumor growth, metastasis, and recurrence, LOx-based biosensors including H₂ O₂ -based, O₂ -based, pH-sensitive, and electrochemical have been designed for cancer diagnosis, and various LOx-based cancer therapy strategies including lactate-depletion-based metabolic cancer therapy/immunotherapy, hypoxia-activated chemotherapy, H₂ O₂ -based chemodynamic therapy, and multimodal synergistic cancer therapy have also been developed. In this review, the lactate-specific catalytic properties of LOx are introduced, and the recent advances on LOx-instructed cancer diagnostic or therapeutic platforms and corresponding biological applications are summarized. Additionally, the challenges and potential of LOx-based nanomedicines are highlighted.

The Gate-Modified Solution-Gated Graphene Transistors for the Highly Sensitive Detection of Lead Ions

Lead ions are heavy metal ions that are extremely harmful to the human body and ecological environment. They can cause irreversible damage to the human nervous system and blood system at low concentrations. It is very important to develop a simple, rapid, and sensitive detection method of Pb²⁺. Solution-gated graphene transistors (SGGTs) have been widely studied in recent years due to their ultra-high sensitivity in chemical sensing. Herein, we have demonstrated a sensitive sensor of Pb²⁺ based on the SGGTs through the glutathione gate modification. When Pb²⁺ are added into the electrolyte solution, the electrical double layer capacitance near the gate electrode changes because Pb²⁺ can be strongly chelated, leading to the channel current change. The detection of Pb²⁺ can be realized. The detection limit of sensors for Pb²⁺ can reach 1 × 10^-18 M, and the response time is about 1 s. The channel current change and the logarithm of Pb²⁺ concentration exhibit a good linear relationship in the concentration range of 1 × 10^-18 and 1 × 10^-6 M. Because the glutathione molecule can well recognize Pb²⁺, the devices also demonstrate good selectivity to Pb²⁺. Compared with the convention detection, our method shows easy operation, high sensitivity, and high selectivity. Therefore, it has great potential in the analysis of trace samples for health and environment monitoring.

Graphene Biodevices for Early Disease Diagnosis Based on Biomarker Detection

The early diagnosis of diseases plays a vital role in healthcare and the extension of human life. Graphene-based biosensors have boosted the early diagnosis of diseases by detecting and monitoring related biomarkers, providing a better understanding of various physiological and pathological processes. They have generated tremendous interest, made significant advances, and offered promising application prospects. In this paper, we discuss the background of graphene and biosensors, including the properties and functionalization of graphene and biosensors. Second, the significant technologies adopted by biosensors are discussed, such as field-effect transistors and electrochemical and optical methods. Subsequently, we highlight biosensors for detecting various biomarkers, including ions, small molecules, macromolecules, viruses, bacteria, and living human cells. Finally, the opportunities and challenges of graphene-based biosensors and related broad research interests are discussed.

Synthesis and characterization of nanoceria for electrochemical sensing applications

Nanoceria (cerium oxide nanoparticles: CeO2-NPs) has received significant attention due to its biocompatibility, good conductivity, and the ability to transfer oxygen. Nanoceria has been widely used to develop electrochemical sensors and biosensors as it could increase response time, sensitivity, and stability of the sensor. In this review, we discussed synthesis methods, and the recent applications employing CeO2-NPs for electrochemical detection of various analytes reported in the most recent four years.

Fiber organic electrochemical transistors based on multi-walled carbon nanotube and polypyrrole composites for noninvasive lactate sensing

Multi-walled carbon nanotubes (MWCNT) play a synergistic role with conducting polymer in practical applications such as biological sensing. In this paper, multi-walled carbon nanotube and polypyrrole (PPy) composites were prepared on a fiber surface for the first time, and their morphology and electrical properties were characterized. Compared with PPy-coated fiber, the presence of carbon nanotubes induced the growth of large areas of PPy nanowires. In addition, fiber organic electrochemical transistors (FECTs) based on PPy and MWCNT were assembled, showing a higher on/off ratio, better stability, and greater flexibility. The lactate biosensor based on FECTs exhibits high sensitivity, with a correlation coefficient of R = 0.9889, quick response time of 0.6-0.8 s, a wide linear response range of 1 nM-1 mM, and excellent selectivity for lactate. Furthermore, the lactate concentration in human sweat was successfully detected by a FECT-based sensor. The hybrid fibers can be easily woven and placed on fabric simply by stitching. This favorable performance of the FECT-based sensor makes it suitable for noninvasive sensing of lactate. Therefore, it provides a promising platform for future use in healthcare and detection applications. Graphical abstract.

A novel solution-gated graphene transistor biosensor for ultrasensitive detection of trinucleotide repeats

A novel SGGT biosensor is constructed to achieve highly sensitive and selective sensing of GAA TNRs by integrating G-quadruplex enzymes.