Current status of optical fiber biosensor based on surface plasmon resonance

Molecularly Responsive Aptamer-Functionalized Hydrogel for Continuous Plasmonic Biomonitoring

Continuous in vivo monitoring of small molecule biomarkers requires biosensors with reversibility, sensitivity in physiologically relevant ranges, and biological stability. Leveraging the real-time, label-free detection capability of surface plasmon resonance (SPR) technology, a molecularly responsive hydrogel film is introduced to enhance small molecule sensitivity. This advanced biosensing platform utilizes split-aptamer-cross-linked hydrogels (aptagels) engineered using 8-arm poly(ethylene glycol) macromers, capable of directly and reversibly detecting vancomycin. Investigation through SPR and optical waveguide mode, along with quartz crystal microbalance with dissipation (QCM-D) monitoring, reveals that the reversible formation of analyte-induced ternary molecular complexes leads to aptagel contraction and significant refractive index changes. Optimization of aptamer cross-link distribution and complementarity of split-aptamer pairs maximizes conformational changes of the aptagel, demonstrating a detection limit of 160-250 nM for vancomycin (6-9 fold improvement over monolayer counterpart) with a broad linear sensing range up to 1 mM. The aptagel maintains stability over 24 h in blood serum and 5 weeks in diluted blood plasma (mimicking interstitial fluid). This structurally responsive aptagel platform with superior stability and sensitivity offers promising avenues for continuous in vivo monitoring of small molecules.

Nanophotonic biosensors for COVID-19 detection: advances in mechanisms, methods, and design

The growing societal impact of coronavirus disease 2019 (COVID-19) has underscored the urgent need for innovative strategies to address the ongoing challenges posed by the pandemic. While rapid therapeutic interventions remain critical for short-term mitigation, equally vital is the development of accessible and efficient diagnostic tools to curb viral transmission. In this context, optical sensing technologies have emerged as foundational tools for detection and diagnosis, owing to their rapid response, user-friendliness, and adaptability. These attributes strengthen their indispensable role in identifying severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the causative agent of COVID-19. This review systematically outlines the structural components of SARS-CoV-2 virions and their respective biological functions, classifies optical biosensors according to their underlying principles and evaluates the advantages and limitations of each methodology in real-world diagnostic applications. By addressing current detection challenges, these optical platforms not only enhance our capacity to manage SARS-CoV-2 but also establish a framework for deploying optical sensing technologies in future pandemic scenarios.

Recent advances of surface plasmon resonance sensors based on metal-organic frameworks

The surface Plasmon resonance (SPR) sensing technique combines rapid response, high sensitivity, non-destructive operation, high specificity, real-time on-site detection, and continuous monitoring advantages. These distinctive features enable its broad application in detecting disease biomarkers, viruses, foodborne contaminants, and hazardous gases. To enhance SPR sensing signals, metal-organic frameworks (MOFs), which emerge as a category of highly porous-organic frameworks, have demonstrated superior performance as SPR sensitive layers due to their features of large specific surface areas, high porosity, regular skeletons, tunable chemical components and functionality, and promising optoelectronic performances. Varieties of MOFs (such as UiO-66, porphyrin-based MOFs, and zeolitic imidazolate frameworks) and MOFs-based composites with improved plasmon-exciton coupling and charge carrier mobility exhibit amplified SPR responses through the integration of diverse effects. This review systematically summarizes the construction principle of MOFs-based SPR sensors and discusses their advancements for the inspection of biomarkers, drug residuals, viruses, and volatile organic gases. Finally, we also analyze the current challenge and provide the perspective about this field, which can inspire readers to a certain extent.

An antibody-free bio-layer interferometry biosensor for immunoglobulin G1 detection in human serum by using molecularly imprinted polynorepinephrine

Bio-Layer Interferometry (BLI) has emerged as a versatile technique in affinity-based biosensing, analogous to Surface Plasmon Resonance. BLI enables real-time, label-free detection, and quantification of biomolecular interactions between an immobilized receptor and an analyte in solution. The BLI sensor comprises an optical fiber with an internal reference layer at the end and an external biocompatible layer where biological receptors are immobilized and exposed to the solution. We report the first BLI bioassay using a mimetic receptor based on molecularly imprinted polynorepinephrine (MIPNE) for detecting immunoglobulin G isotype 1 in whole, untreated, human serum. Using BLI fiber optics with different chemical linkers, we compared the analytical performance, with a focus on selectivity against other Ig classes and across the four IgG isotypes. The bioassay displayed the ability to detect IgG1 with excellent analytical parameters both in buffer condition (LOD = 0.54 ± 0.01 μg mL-1, LOQ = 2.09 ± 0.02 μg mL-1, avRSD = 5.3%) and in whole serum (%RE = 0.3%, avRSD = 3%). These findings highlight the potential of integrating PNE-based molecular imprinting technology with BLI platforms for diverse analytical and diagnostic applications.

Microscale insight into the proton concentration during electrolytic reaction via an optical microfiber: potential for microcurrent monitoring by a dielectric probe

Local microcurrent monitoring is of great significance for biological and battery systems, yet it poses a formidable challenge. The current measurement techniques rely on electromagnetic materials which inevitably introduce interference to the system under examination. To address this issue, a promising approach based on a dielectric fiber-optic sensor is demonstrated. The microfiber is capable of detecting microcurrent through monitoring the localized proton concentration signal with a pH resolution of 0.0052 pH units. By sensing the refractive index variation surrounding the sensor induced by the interaction between local proton concentration changes and oxidizer-treated microfiber surface through the evanescent field, this sensing mechanism effectively avoids the interference of the electromagnetic material on the performance of the tested system. This sensor exhibits a limit of detection for microcurrent of 1 μA. The sensing region is a microfiber with a diameter of 8.8 μm. It can get invaluable information that cannot be obtained through conventional electrochemical methods. Examples include photocurrent attenuation in photogenerated carrier materials during illumination, electrical activation in nerve cells, and fluctuations in the efficiency of electrical energy generation during battery discharge. This approach provides a powerful complement to electrochemical methods for the elucidation of microscale reaction mechanisms. The information provided by the prepared dielectric fiber-optic sensor will shed more light on proton kinetics and electrochemical and electrobiological mechanisms, which may fill an important gap in the current bioelectricity and battery monitoring methods.

Dual-mode SPR/SERS optical fiber sensor for ultra-trace mercury ions detection

The detection of mercury ions (Hg2+) is crucial due to its harmful effects on health and environment. In this article, what we believe to be a novel dual-mode optical fiber sensor incorporating surface plasmon resonance (SPR) and surface-enhanced Raman scattering (SERS) is proposed for ultra-trace Hg2+ detection. The sensing probe comprises gold (Au)/graphene oxide (GO) composite membrane structure and Au nanospheres (AuNPs), which are connected via double-stranded DNA. In the presence of Hg2+, two single-stranded DNA (ssDNA) modified on the sensing region and AuNPs asymmetrically pair to form a thymine (T) - Hg2+ - T structure, facilitating AuNPs attachment to the sensing region. This attachment induces spectral changes, thereby enabling Hg2+ detection. In the SPR mode, the limit of detection (LOD) for Hg2+ is 1.82 × 10-12 M. In the SERS mode, AuNPs generate numerous "hot spots" that amplify the Raman signal through electromagnetic enhancement mechanism (EM), the Au/GO composite membrane can undergo charge transfer with Raman molecule to further enhance the Raman signal through chemical enhancement mechanism (CM), thus achieving detection of Hg2+ with a LOD of 3.94 × 10-13 M. The synergy between SPR mode and SERS mode enhances cross-validation of results and improves accuracy and reliability of the assay. Therefore, the sensor proposed in this paper demonstrates strong potential for diverse practical applications.

Generation of leaky mode resonance and lossy mode resonance with the same optical platform

Leaky mode resonance (LeMR) and lossy mode resonance (LoMR) refer to two different surface waves but are easily confused. Herein, we comprehensively investigated the excitation mechanism and sensing performance of both LeMR and LoMR with the same prism-film-surrounding platform based on the rigorous transfer matrix method. Both non-absorbing film waveguides, absorbing film waveguides, and gold-cladding film waveguides were analyzed. Our findings reveal that degenerate LeMR occurs across all configurations while polarization-dependent LoMR emerges only in the latter two cases, with their appearance determined by the corresponding critical angle of the incident wave. This spectral difference leads to different sensing performances for surrounding refractive index (RI) detection. In particular, the LeMR remains sensitive to the RI changing in a wide range, achieving the highest sensitivity as the prism-film-surrounding becomes optically symmetric. In contrast, the LoMR operates exclusively for the surrounding RI lower than that of the prism. The results also suggest that the LeMR exhibits flexibility in film material selection while the LoMR offers the advantage of a narrower bandwidth.

Ultrasensitive detection of SCCA employing a graphene oxide integrated microfiber ring laser biosensor

Squamous cell carcinoma antigen (SCCA) is one of the most commonly detected cancer biomarkers for a variety of cancers. In this paper, a microfiber ring laser biosensor with a graphene oxide linking layer for SCCA detection was proposed and experimentally demonstrated. SCCA antibody immobilized on graphene oxide surface binds specifically to SCCA, and induces refractive index variation over the surface of the microfiber biosensor, which leads to a wavelength shift of the microfiber ring laser biosensor. The experimental results show that the proposed laser biosensor can detect SCCA with concentrations from 0.01 to 50 ng/mL, and the calculated detection limit can be as low as 1.3 pg/mL. Additionally, the label-free quantitative detection of SCCA using the proposed microfiber biosensor was verified experimentally according to the corresponding regression equation, and the results agree well with clinical examination detection. This constructed microfiber biosensor may have promising practical applications in analytical detection, medical diagnostics, etc.

Advances in the application of carbon dots-based fluorescent probes in disease biomarker detection

Carbon dots (CDs), as an emerging nanomaterial, have shown tremendous potential in disease biomarker detection. CDs can selectively interact with different target molecules, enabling highly sensitive and specific detection of these biomolecules. Compared to traditional detection methods, CDs sensors offer advantages such as rapid response, high detection sensitivity, and low cost. In this review, we summarize the latest advances in the application of CDs fluorescence probes for the detection of disease biomarkers, including sensing mechanisms, and their applications in the selective detection of metal ions, amino acids, enzymes, proteins, other biomolecules, as well as bacteria and viruses. We discuss the current challenges and issues associated with the practical application of CDs-based fluorescent probes. Furthermore, we propose future directions for the development of CDs. We hope that this review will provide new insights for researchers in the field of disease biomarker detection.

Foodborne pathogen detection using surface acoustic wave biosensors: a review

This paper summarizes several attractive surface acoustic wave (SAW) biosensors, including Love-wave sensors, dual-channel SAW sensors, langasite SAW sensors, and SAW syringe filters. SAW sensors with different piezoelectric materials and high-frequency SAW sensors used for identifying the food pathogenic bacteria Escherichia coli (E. coli) are discussed together with the examples of methods based on such sensing technology that have been effectively utilized in diagnostics and epidemiological research. This review also emphasizes some of the limitations of using these biosensors, which have prompted the increased need for more rapid, sensitive, selective, portable, power-efficient, and low-cost methods for detecting these pathogens. It is envisioned that SAW devices will have remarkable significance in the future.

An enhanced SPR optical fiber biosensor using Ti3C2Tx MXene/AuNPs for label-free and sensitive detection of human IgG

Abnormal human immunoglobulin G (IgG) may induce the risk of immune system disorder, infectious diseases, tumors and so on. However, the current detection methods exhibit low sensitivity, which limits their practical application. In this work, an SPR optical fiber sensor (SPR-OFS) with high sensitivity is designed for label-free detection of human IgG. It is fabricated using a heterostructure optical fiber coated with Au film/AuNPs and the Ti3C2Tx MXene biofunctionalized with goat anti-human IgG by polydopamine (PDA). In the experiment, the optimal thickness of the Ti3C2Tx MXene was explored and determined to be about 93 nm by comprehensively considering the refractive index (RI) sensitivity and spectral bandwidth of the SPR sensor. When the largest figure of merit (FOM) is calculated to be 17.8279 RIU-1, its RI sensitivity was ultimately found to be 2804.5 nm per RIU. The SPR-OFS was employed to detect human IgG within the concentration range of 0-30 μg mL-1 and its sensitivity is demonstrated to be 1.7046 nm (μg mL-1)-1. The SPR-OFS was also proved to have excellent linearity, specificity and stability. The proposed sensor offers outstanding performance with simple fabrication, providing a cutting-edge bioanalytical platform with potential applications in clinical diagnosis.

Renewable regeneration optic fiber glucose sensor based on succinylaminobenzenoboronic acid modified excessively tilted fiber grating

BACKGROUND

Optical fiber sensors have been used to detect glucose owing to advantages such as low cost, small size, and ease of operation etc. phenylboronic acid is one of the commonly used receptors for glucose detection, however phenylboronic acid based regenerative optical fiber sensors are commonly cumulative regeneration, renewable regeneration sensor has been missing from the literature.

RESULTS

In this work, instead of using phenylboronic acid, we synthesized succinylaminobenzenoboronic acid molecule (BPOA) by introducing a short chain containing carboxyl group at the other end of phenylboronic acid then covalently bonded BPOA on the surface of excessively tilted fiber grating (Ex-TFG). This provides a very stable platform for renewable regeneration and the regenerative buffer was also optimized. The proposed renewable regeneration method exhibited higher linearity and sensitivity (R2 = 0.9992, 8 pm/mM) in relative to the conventional cumulative regeneration method (R2 = 0.9718, 4.9 pm/mM). The binding affinity between BPOA and glucose was found to be almost constant over 140 bind/release cycles with a variation of less than 0.3 % relative standard deviation.

SIGNIFICANCE

The regenerative and label-free sensing capacity of the proposed device provides a theoretical foundation for label-free saccharide detection and the development of wearable glucose monitoring devices based on fiber optic sensors.

Uricase biofunctionalized plasmonic sensor for uric acid detection with APTES-modified gold nanotopping

Current uric acid detection methodologies lack the requisite sensitivity and selectivity for point-of-care applications. Plasmonic sensors, while promising, demand refinement for improved performance. This work introduces a biofunctionalized sensor predicated on surface plasmon resonance to quantify uric acid within physiologically relevant concentration ranges. The sensor employs the covalent immobilization of uricase enzyme using 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and N-Hydroxysuccinimide (NHS) crosslinking agents, ensuring the durable adherence of the enzyme onto the sensor probe. Characterization through atomic force microscopy and Fourier transform infrared spectroscopy validate surface alterations. The Langmuir adsorption isotherm model elucidates binding kinetics, revealing a sensor binding affinity of 298.83 (mg/dL)-1, and a maximum adsorption capacity of approximately 1.0751°. The biofunctionalized sensor exhibits a sensitivity of 0.0755°/(mg/dL), a linear correlation coefficient of 0.8313, and a limit of detection of 0.095 mg/dL. Selectivity tests against potentially competing interferents like glucose, ascorbic acid, urea, D-cystine, and creatinine showcase a significant resonance angle shift of 1.1135° for uric acid compared to 0.1853° for interferents at the same concentration. Significantly, at a low uric acid concentration of 0.5 mg/dL, a distinct shift of 0.3706° was observed, setting it apart from the lower values noticed at higher concentrations for all typical interferent samples. The uricase enzyme significantly enhances plasmonic sensors for uric acid detection, showcasing a seamless integration of optical principles and biological recognition elements. These sensors hold promise as vital tools in clinical and point-of-care settings, offering transformative potential in biosensing technologies and the potential to revolutionize healthcare outcomes in biomedicine.

Orientation of Antibody Modified and Reacted on Carboxy-Functionalized Polystyrene Particle Revealed by Zeta Potential Measurement

The comprehensive understanding of the orientation of antibodies on a solid surface is crucial for affinity-based sensing mechanisms. In this study, we demonstrated that the orientation of primary antibodies modified on carboxy-functionalized polystyrene (PS) particles can be analyzed using zeta potential behavior at different pH based on the combined Gouy-Chapman-Stern model and the acid dissociation of carboxy groups and antibodies. We observed that at low surface concentrations of the primary antibody, a side-on orientation was predominant. However, at higher concentrations (approximately 30000 antibodies per PS particle), the orientation shifted to an end-on type due to steric hindrance. Furthermore, the reaction mechanism of the secondary antibody exhibited pH-dependent behavior. At pH > 7, the zeta potential changes were attributed to the antibody-antibody reaction, whereas at pH < 7, adsorption of secondary antibody onto the PS particle was observed, leading to a change in the orientation of the primary antibody modified on the PS particle to an end-on type. The change in zeta potential due to secondary antibody binding indicated a detection limit of 37000 antibodies per PS particle. As a result, we revealed that the analysis of zeta potential behavior enables the evaluation of antibody orientation and the detection of zeptomole order antibodies. This study represents the first demonstration of this capability. We anticipate that the present concept and results will broaden the quantitative application of zeta potential measurements and have significant implications for research areas, including physical chemistry and analytical chemistry.

Rapid, sensitive and multiplexed detection of SARS-CoV-2 viral nucleic acids enabled by phase-based surface plasmon resonance of metallic gratings

A rapid, sensitive and easy-to-implement approach is proposed for the detection of pathogenic nucleic acids based on phase-based plasmonic spectroscopy of metallic gratings. The plasmonic sensors were fabricated using interference lithography and functionalized with single-stranded DNA probes to specific target SARS-CoV-2. The biosensor achieved the detection of 40 fM viral nucleic acids within 5 min; furthermore, a detection capability of 1 aM (0.6 copies/µL) was acquired when combining with the recombinase polymerase amplification. Additionally, the multiplexed sensing system was demonstrated to simultaneously detect three genomic sequences on a single sensor chip, thereby enhancing diagnostic accuracy and enabling high-throughput detection.

DNA sensing based on aggregation of Janus particles using dynamic light scattering

BACKGROUND

The aggregation of isotropic particles through interparticle reactions poses a challenge in control due to the ability of all surfaces to bind to each other, rendering the quantitative detection of such interparticle reactions based on particle size difficult. Here, we proposed a novel detection scheme for DNA utilizing an assembly of Janus particles (JPs) employing dynamic light scattering (DLS). DNA molecules are tethered on one hemisphere of the JP, while the other hemisphere retains its hydrophobic properties.

RESULTS

Aggregation of JPs was induced by the sandwich hybridization of target DNA between them. The assembly of JPs was effectively monitored by the changes in hydrodynamic diameter detected by DLS, revealing that aggregation peaks at 2-3 particles and further reaction was hindered due to the inability of one hemisphere of the JP to interact with another JP. The target DNA demonstrated detectability at concentrations as low as several tens of pM to several nM using a digital sensing method. The two types of target DNA, such as simple (14 base pairs) and HIV-2 specific sequences (20 base pairs) were detectable at nM and pM levels, respectively. Moreover, we substantiated the robustness of our detection scheme through stoichiometric calculations based on an equilibrium model. The present detection mechanism was well explained based on the binding affinity of DNA hybridization.

SIGNIFICANCE

This detection method harnesses the anisotropic nature of JPs and represents the first detection approach based on aggregation. By altering the modification molecules on JPs to match target molecules, such as proteins and organic compounds, a wide range of versatile molecules can be detected using this scheme with high sensitivity. This underscores the broad applicability of the present method.

A pathway for detection of gastric cancer biomarkers via using a layer-by-layer coated D-shaped grinding long-period fiber grating sensor

Gastric cancer significantly contributes to global cancer mortality, often leading to inoperable stages and high recurrence rates post-surgery. Elevated levels of G-17 and G-gly have been identified as potential risk factors, particularly in patients with duodenal ulcers. This study introduces an innovative D-shaped grinding long-period fiber grating sensor (D-LLPFGs) designed for non-invasive detection of the gastrin G-17 antigen, employing a layer-by-layer chemical self-assembly to bond G-17 antibodies onto the fiber surface through hydrogen bonding. The D-LLPFGs sensor demonstrated significant spectral shifts within 1 min of antigen-antibody interaction, highlighting its rapid detection capability. At an optimized antibody concentration of 4 μg/ml, antigen testing across different concentrations (10, 12.5, 20, 50 μg/ml) showed peak changes at 12.5 μg/ml antigen, with a 1.186 nm shift and 0.503 dB loss. The sensor exhibited a wavelength sensitivity of 0.095 nm/μg/ml, indicating its high sensitivity and potential in gastric cancer classification, diagnosis, and treatment. This research concludes that the D-shaped fiber sensor is an effective and sensitive tool for detecting G-17 antigen levels, presenting a significant advancement in non-invasive gastric cancer diagnosis. Its quick response time and high sensitivity highlight its potential for broad biomedical applications, offering a new avenue for early cancer detection and improving patient prognosis. The success of this study opens the door to further exploration and implementation of fiber optic sensors in clinical settings, marking a significant step forward in the fight against gastric cancer.

Hydrogel binding sodium alginate based optical fiber surface plasmon resonance for calcium ion trace detection

A plasmonic tilted fiber Bragg grating (TFBG)-based sensor for the detection of calcium ion (Ca2+) was proposed and demonstrated experimentally. Hydrogel material was synthesized by utilizing hydrogen bond recombination between cellulose nanocrystals (CNC) and polyvinyl alcohol (PVA). Sodium alginate (SA) was incorporated into this hydrogel material, resulting in a composite membrane with specific binding properties for Ca2+. The membrane was applied as a coating on the surface of a gold-coated TFBG. The CNC/PVA-SA modified gold on the TFBG surface enhanced the localized refractive index changes caused by variations of Ca2+ concentrations. The experimental results demonstrated an impressive limit of detection (LOD) of approximately 0.025 fM, which is five orders of magnitude better than the current LODs of similar Ca2+ sensors. And the proposed Ca2+ sensor exhibited a wide dynamic range of 10-16 M to 10-6 M.

High sensitivity fiber SPR sensor based on a spiral coarse cone structure

A fiber SPR sensor can achieve rapid and portable detection of trivalent arsenic ions (As3+) in drinking water or food, but their sensitivity and detection limit need to be further improved and developed toward specific detection. This article proposed the implementation of the SPR sensor using a biased core fiber spiral coarse cone structure. The fine core of the biased core fiber was used to reduce the mode of transmitted light. By controlling the pitch of the spiral core to control the SPR incidence angle, a significant increase in the sensitivity of the fiber SPR sensor was achieved. Meanwhile, the harmless glutathione (GSH) was modified on the surface of the sensing gold film to achieve the specific detection of As3+. The experimental results indicate that the spiral coarse cone fiber SPR sensor proposed in this article has a detection sensitivity of 32.48 nm/ppb for As3+, with a detection limit as low as 0.011 ppb, meeting the detection requirements of the World Health Organization for As3+ in water, which provides a new feasible solution for fast, portable, and highly sensitive detection of metal ions in water and food.

Dual parameter sensor for RI and temperature detection by cascading Ag/WO3 film PCF and Ag/MoS2/PDMS film PCF

Multi-parameter surface plasmon resonance (SPR) sensors generally have low detection sensitivity due to detection wavelength limitations. We developed a two-parameter SPR sensor for refractive index (RI) and temperature detection by cascading Ag/WO3 film photonic crystal fiber (PCF) and Ag/MoS2 film PCF together. By using WO3 film with a low effective refractive index to prevent oxidation of silver-based PCF and maintain a wider RI sensing channel detection band; at the same time, MoS2 film with a high effective refractive index is used to modulate the detection range of temperature sensing channel. The detection performance and stability of the two-parameter SPR sensor were verified by software simulation and experiments. The data results indicate that the sensor can perform stable and independent tests during RI and temperature detection. The maximum sensitivity of the sensor within the RI detection range of 1.333 to 1.395 is as high as 6443 nm/RIU; the maximum temperature sensitivity within the temperature detection range of 40 °C∼90 °C is 8.72 nm/°C. This sensor can achieve high-sensitivity RI measurement in a high-temperature environment. This will have broad application prospects in the field of biochemistry.

Advances in Nanoplasmonic Biosensors: Optimizing Performance for Exosome Detection Applications

The development of sensitive and specific exosome detection tools is essential because they are believed to provide specific information that is important for early detection, screening, diagnosis, and monitoring of cancer. Among the many detection tools, surface-plasmon resonance (SPR) biosensors are analytical devices that offer advantages in sensitivity and detection speed, thereby making the sample-analysis process faster and more accurate. In addition, the penetration depth of the SPR biosensor, which is <300 nm, is comparable to the size of the exosome, making the SPR biosensor ideal for use in exosome research. On the other hand, another type of nanoplasmonic sensor, namely a localized surface-plasmon resonance (LSPR) biosensor, has a shorter penetration depth of around 6 nm. Structural optimization through the addition of supporting layers and gap control between particles is needed to strengthen the surface-plasmon field. This paper summarizes the progress of the development of SPR and LSPR biosensors for detecting exosomes. Techniques in signal amplification from two sensors will be discussed. There are three main parts to this paper. The first two parts will focus on reviewing the working principles of each sensor and introducing several methods that can be used to isolate exosomes. This article will close by explaining the various sensor systems that have been developed and the optimizations carried out to obtain sensors with better performance. To illustrate the performance improvements in each sensor system discussed, the parameters highlighted include the detection limit, dynamic range, and sensitivity.

2D material-based surface plasmon resonance biosensors for applications in different domains: an insight

The design of surface plasmon resonance (SPR) sensors has been greatly enhanced in recent years by the advancements in the production and integration of nanostructures, leading to more compact and efficient devices. There have been reports of novel SPR sensors having distinct nanostructures, either as signal amplification tags like gold nanoparticles (AuNPs) or as sensing substrate-like two-dimensional (2D) materials including graphene, transition metal dichalcogenides (TMDCs), MXene, black phosphorus (BP), metal-organic frameworks (MOFs), and antimonene. Such 2D-based SPR biosensors offer advantages over conventional sensors due to significant increases in their sensitivity with a good figure of merit and limit of detection (LOD). Due to their atomically thin structure, improved sensitivity, and sophisticated functionalization capabilities, 2D materials can open up new possibilities in the field of healthcare, particularly in point-of-care diagnostics, environmental and food monitoring, homeland security protection, clinical diagnosis and treatment, and flexible or transient bioelectronics. The present study articulates an in-depth analysis of the most recent developments in 2D material-based SPR sensor technology. Moreover, in-depth research of 2D materials, their integration with optoelectronic technology for a new sensing platform, and the predicted and experimental outcomes of various excitation approaches are highlighted, along with the principles of SPR biosensors. Furthermore, the review projects the potential prospects and future trends of these emerging materials-based SPR biosensors to advance in clinical diagnosis, healthcare biochemical, and biological applications.

Optical fiber sensing probe for detecting a carcinoembryonic antigen using a composite sensitive film of PAN nanofiber membrane and gold nanomembrane

An optical fiber sensing probe using a composite sensitive film of polyacrylonitrile (PAN) nanofiber membrane and gold nanomembrane is presented for the detection of a carcinoembryonic antigen (CEA), a biomarker associated with colorectal cancer and other diseases. The probe is based on a tilted fiber Bragg grating (TFBG) with a surface plasmon resonance (SPR) gold nanomembrane and a functionalized polyacrylonitrile (PAN) PAN nanofiber coating that selectively binds to CEA molecules. The performance of the probe is evaluated by measuring the spectral shift of the TFBG resonances as a function of CEA concentration in buffer. The probe exhibits a sensitivity of 0.46 dB/(µg/ml), a low limit of detection of 505.4 ng/mL in buffer, and a good selectivity and reproducibility. The proposed probe offers a simple, cost-effective, and a novel method for CEA detection that can be potentially applied for clinical diagnosis and monitoring of CEA-related diseases.

Silver nanoparticles-based localized surface plasmon resonance biosensor for Escherichia coli detection

Escherichia coli (E. coli) bacteria with varying solution concentrations have been successfully detected using silver nanoparticles (Ag NPs)-based localized surface plasmon resonance (LSPR) biosensors. The Ag NPs were effectively synthesized by a chemical method using trisodium citrate with L-Histidine (L-His) and deposited on the surface of Au thin film-coated half-cylinder BK-7 prisms. He-Ne laser with a wavelength of 632.8 nm was used to generate LSPR phenomena in Kretschmann configuration with prism/Au thin film/His-Ag NPs/E. coli bacteria/air structure arrangements. The variation of E. coli bacteria concentration was carried out to determine the effect of E. coli bacteria concentration on the LSPR curve characteristics. The characterization results showed that the size of Ag NPs was 18.7 nm, and that of His-Ag NPs was 17.9 nm. Selected area electron diffraction results indicated the formation of diffraction rings with the presence of lattice planes (111), (200), (220), and (311), proving the face-centered cubic crystal structure of silver. The absorbance peak of Ag NPs shifted from a wavelength of 421-414 nm with an increase in band gap energy from 2.94 eV to 2.99 eV, along with a decreased average particle size. The functional groups observed in His-Ag NPs showed wavenumbers at 3320 to 3318 cm-1, 2106 to 2129 cm-1, and 1635 cm-1, showing the OH, CH, and C CO bonds, respectively. The SPR angle of the prism/Au thin film/air structure is 44.80°. Meanwhile, the LSPR angle for the prism/Au thin film/His-Ag NPs/air structure is 44.92°. There is an increase in the LSPR angle by 0.12°. Moreover, the minimum reflectance increases by 0.02. After detecting E. coli bacteria, the LSPR angle shifted by 0.26°, 0.38°, and 0.49° for concentrations of 6.0 × 108 CFU/mL, 6.0 × 107 CFU/mL and 6.0 × 106 CFU/mL respectively. However, the minimum reflectance rose from 0.09° to 0.14°, 0.20°, and 0.22°. Moreover, SPR testing with the structure of the prism/Au thin film/E. coli bacteria/air was carried out to determine the contribution of His-Ag NPs for detecting E. coli bacteria. The results showed that no angular shift occurs. These results indicate that using Ag NPs encapsulated with L-His is essential in amplifying the SPR signal and detecting E. coli bacteria. There was a notable alteration in both the LSPR angle and minimum reflectance indicating that adding His-Ag NPs facilitated the interaction between the E. coli and the sensor surface, thereby enhancing the performance of LSPR-based sensors for E. coli detection for low limit of detection value at 0.47 CFU/mL.

Spiral cone fiber SPR sensor for detecting ginsenoside Rg1

The conical fiber SPR sensor is easy to manufacture and has been used in biochemical detection research, but it has the problem of structural fragility. This article proposes a spiral cone fiber SPR sensor, which introduces a spiral structure on the 76µm fiber coarse cone, achieving good coupling of the core mode into the cladding mode, and improving the physical strength and practicality of the cone-shaped fiber SPR sensor. By modifying the target protein on the surface of the sensor gold film, specific detection of ginsenoside Rg1, an active ingredient of traditional Chinese medicine ginseng, was achieved. The detection sensitivity was 0.138 nm/(µm/ml) and the detection limit was 0.22µm/ml. The proposed spiral cone fiber SPR sensor provides a new scheme for the specific detection of active ingredients in traditional Chinese medicine, which is structurally stable and physically strong.

Detection of NT-proBNP Using Optical Fiber Back-Reflection Plasmonic Biosensors

Heart failure (HF) is a clinical entity included in cardiovascular diseases affecting millions of people worldwide, being a leading cause of hospitalization of older adults, and therefore imposing a substantial economic burden on healthcare systems. HF is characterized by dyspnea, fatigue, and edema associated with elevated blood levels of natriuretic peptides, such as N Terminal pro-B-type Natriuretic Peptide (NT-proBNP), for which there is a high demand for point of care testing (POCT) devices. Optical fiber (OF) biosensors offer a promising solution, capable of real-time detection, quantification, and monitoring of NT-proBNP concentrations in serum, saliva, or urine. In this study, immunosensors based on plasmonic uncladded OF tips were developed using OF with different core diameters (200 and 600 µm). The tips were characterized to bulk refractive index (RI), anddetection tests were conducted with NT-proBNP concentrations varying from 0.01 to 100 ng/mL. The 200 µm sensors showed an average total variation of 3.6 ± 2.5 mRIU, an average sensitivity of 50.5 mRIU/ng·mL-1, and a limit of detection (LOD) of 0.15 ng/mL, while the 600 µm sensors had a response of 6.1 ± 4.2 mRIU, a sensitivity of 102.8 mRIU/ng·mL-1, and an LOD of 0.11 ng/mL. Control tests were performed using interferents such as uric acid, glucose, and creatinine. The results show the potential of these sensors for their use in biological fluids.

Silver-coated hollow fiber surface plasmon resonance sensor for glucose detection with enhanced limit of detection

A fiber-optic surface plasmon resonance (SPR) biosensor based on a silver-coated hollow fiber (HF) structure for glucose detection is presented. The sensor surface was immobilized with 4-mercaptophenylboronic acid (PMBA) acting as a glucose recognition monolayer. Then, gold nanoparticles (AuNPs) modified with 2-aminoethanethiol (2-AET) and PMBA were introduced onto the sensor surface after glucose was captured to enhance the wavelength shift of the SPR phenomenon excited by the light transmitted in the wall of the HF sensor. Instead of the conventional one-step sensitization pretreatment commonly used in the deposition process of silver films for fiber-optic SPR sensors, a sensitization-activation two-step activation method was adopted in the fabrication of the proposed sensor. Experiments for glucose detection were performed on the fabricated sensors in the concentration range of 1 nM-1 mM. Results showed that the sensor fabricated by the two-step activation method has a much larger shift of resonance wavelength than the sensor fabricated using the one-step sensitization method. The resonance wavelength shift was found to be linear to the logarithm of the concentration in the range of 1 nM-1 mM. The sensor achieved a limit of detection (LOD) of as low as 1 nM, which is at least an order of magnitude lower than that of other fiber-optic sensors for glucose detection reported previously. The presented HF glucose sensor has the potential for biosensing applications and provides a large reference value in the study of optical fiber SPR sensors for biosensing.

Rapid Nucleic Acid Diagnostic Technology for Pandemic Diseases

The recent global pandemic of coronavirus disease 2019 (COVID-19) has enormously promoted the development of diagnostic technology. To control the spread of pandemic diseases and achieve rapid screening of the population, ensuring that patients receive timely treatment, rapid diagnosis has become the top priority in the development of clinical technology. This review article aims to summarize the current rapid nucleic acid diagnostic technologies applied to pandemic disease diagnosis, from rapid extraction and rapid amplification to rapid detection. We also discuss future prospects in the development of rapid nucleic acid diagnostic technologies.

Recent advances in nanotechnology for programmed death ligand 1-targeted cancer theranostics

Programmed cell death ligand 1 (PD-L1)/programmed cell death protein 1 (PD-1) checkpoint inhibitor-based immunotherapy has provided a unique and potent weapon against cancer in clinical practice. The likelihood of achieving beneficial effects from PD-L1/PD-1 immune checkpoint blockade (ICB) therapy is clinically assessed by detecting PD-L1 expression through invasive tissue biopsies. However, PD-L1 expression is susceptible to tumor heterogeneity and dynamic response to ICB therapy. Moreover, currently, anti-PD-L1 immunotherapy still faces challenges of the low targeting efficiency of antibody drugs and the risk of immune-associated adverse events. To overcome these issues, advanced nanotechnology has been developed for the purpose of quantitative, non-invasive, and dynamic analyses of PD-L1, and to enhance the efficiency of ICB therapy. In this review, we first introduce the nanoprobe-assisted in vitro/in vivo modalities for the selective and sensitive analysis of PD-L1 during the diagnostic and therapeutic process. On the other hand, the feasibility of fabricating diverse functional nanocarriers as smart delivery systems for precisely targeted delivery of PD-L1 immune checkpoint inhibitors and combined therapies is highlighted. Finally, the current challenges are discussed and future perspectives for PD-L1-targeted cancer theranostics in preclinical research and clinical settings are proposed.

Optical fiber immunosensors based on surface plasmon resonance for the detection of Escherichia coli

Every year, millions of people suffer some form of illness associated with the consumption of contaminated food. Escherichia coli (E. coli), found in the intestines of humans and other animals, is commonly associated with various diseases, due to the existence of pathogenic strains. Strict monitoring of food products for human consumption is essential to ensure public health, but traditional cell culture-based methods are associated with long waiting times and high costs. New approaches must be developed to achieve cheap, fast, and on-site monitoring. Thus, in this work, we developed optical fiber sensors based on surface plasmon resonance. Gold and cysteamine-coated fibers were functionalized with anti-E. coli antibody and tested using E. coli suspensions with concentrations ranging from 1 cell/mL to 105 cells/mL. An average logarithmic sensitivity of 0.21 ± 0.01 nm/log(cells/mL) was obtained for three independent assays. An additional assay revealed that including molybdenum disulfide resulted in an increase of approximately 50% in sensitivity. Specificity and selectivity were also evaluated, and the sensors were used to analyze contaminated water samples, which verified their promising applicability in the aquaculture field.

All-fiber label-free optical fiber biosensors: from modern technologies to current applications [Invited]

Biosensors are established as promising analytical tools for detecting various analytes important in biomedicine and environmental monitoring. Using fiber optic technology as a sensing element in biosensors offers low cost, high sensitivity, chemical inertness, and immunity to electromagnetic interference. Optical fiber sensors can be used in in vivo applications and multiplexed to detect several targets simultaneously. Certain configurations of optical fiber technology allow the detection of analytes in a label-free manner. This review aims to discuss recent advances in label-free optical fiber biosensors from a technological and application standpoint. First, modern technologies used to build label-free optical fiber-based sensors will be discussed. Then, current applications where these technologies are applied are elucidated. Namely, examples of detecting soluble cancer biomarkers, hormones, viruses, bacteria, and cells are presented.

3D-printed biosensors in biomedical applications exploiting plasmonic phenomena and antibody self-assembled monolayers

In this work, a 3D-printed plasmonic chip based on a silver-gold bilayer was developed in order to enhance the optical response of the surface plasmon resonance (SPR) probe. More specifically, numerical and experimental results were obtained on the 3D-printed SPR platform based on a silver-gold bilayer. Then, the optimized probe's gold plasmonic interface was functionalized with a specific antibody directed against the p27Kip1 protein (p27), an important cell cycle regulator. The 3D-printed plasmonic biosensor was tested for p27 detection with good selectivity and a detection limit of 55 pM. The biosensor system demonstrated performance similar to commercially available ELISA (enzyme-linked immunoassay) kits, with several advantages, such as a wide detection range and a modular and simple-based architecture. The proposed biosensing technology offers flexible deployment options that are useful in disposable, low-cost, small-size, and simple-to-use biochips, envisaging future applications in experimental and biomedical research.

Hierarchical Nanobiosensors at the End of the SARS-CoV-2 Pandemic

Nanostructures have played a key role in the development of different techniques to attack severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Some applications include masks, vaccines, and biosensors. The latter are of great interest for detecting diseases since some of their features allowed us to find specific markers in secretion samples such as saliva, blood, and even tears. Herein, we highlight how hierarchical nanoparticles integrated into two or more low-dimensional materials present outstanding advantages that are attractive for photonic biosensing using their nanoscale functions. The potential of nanohybrids with their superlative mechanical characteristics together with their optical and optoelectronic properties is discussed. The progress in the scientific research focused on using nanoparticles for biosensing a variety of viruses has become a medical milestone in recent years, and has laid the groundwork for future disease treatments. This perspective analyzes the crucial information about the use of hierarchical nanostructures in biosensing for the prevention, treatment, and mitigation of SARS-CoV-2 effects.

Biosensing of DNA through difference in interaction between microparticle and glass plate based on particle dissociation in a coupled acoustic-gravitational field

A novel approach for detecting DNA without labeling the target DNA was developed based on the particle dissociation behavior in a combined acoustic-gravitational field. The particles, which are tethered on a glass plate via intermolecular interactions (Fbind), are dissociated by the resultant force of the acoustic radiation force (Fac), which is a function of the applied voltage (V), and the sedimentation force. In this system, V required for particle dissociation is dependent on Fbind. The differences in Fbind were exploited for detecting the target DNA. A glass plate and polystyrene (PS) particles were respectively modified with anchor and capture DNAs. The target DNA induces immobilization of the PS particles on the glass plate through sandwich hybridization, with a large accompanying Fbind. In the absence of the target DNA, the anchor DNA on the glass plate interacted weakly with the capture DNA on the PS particles via direct binding (small Fbind). The particle dissociation behavior varies based on the concentration of the target DNA due to changes in the ratio of the PS particles tethered through direct binding and sandwich hybridization. Target DNA with a length exceeding 12 base pairs (bps) can be detected on the picomolar scale at concentrations of 10-12 to 10-5 M. This detection scheme was applied to a specific sequence of HIV-2 with 20 bps, achieving a picomolar detection limit.

Marriage of a Dual-Plasmonic Interface and Optical Microfiber for NIR-II Cancer Theranostics

The use of light as a powerful tool for disease treatment has introduced a new era in tumor treatment and provided abundant opportunities for light-based tumor theranostics. This work reports a photothermal theranostic fiber integrating cancer detection and therapeutic functions. Its self-heating effect can be tuned at ultralow powers and used for self-heating detection and tumor ablation. The fiber, consisting of a dual-plasmonic nanointerface and an optical microfiber, can be used to distinguish cancer cells from normal cells, quantify cancer cells, perform hyperthermal ablation of cancer cells, and evaluate the ablation efficacy. Its cancer cell ablation rate reaches 89% in a single treatment. In vitro and in vivo studies reveal quick, deep-tissue photonic hyperthermia in the NIR-II window, which can markedly ablate tumors. The marriage of a dual-plasmonic nanointerface and an optical microfiber presents a novel paradigm in photothermal therapy, offering the potential to surmount the challenges posed by limited light penetration depth, nonspecific accumulation in normal tissues, and inadvertent damage in current methods. This work thus provides insight for the exploration of an integrated theranostic platform with simultaneous functions in cancer diagnostics, therapeutics, and postoperative monitoring for future practical applications.

Recent Advances in Real-Time Label-Free Detection of Small Molecules

The detection and analysis of small molecules, typically defined as molecules under 1000 Da, is of growing interest ranging from the development of small-molecule drugs and inhibitors to the sensing of toxins and biomarkers. However, due to challenges such as their small size and low mass, many biosensing technologies struggle to have the sensitivity and selectivity for the detection of small molecules. Notably, their small size limits the usage of labeled techniques that can change the properties of small-molecule analytes. Furthermore, the capability of real-time detection is highly desired for small-molecule biosensors' application in diagnostics or screening. This review highlights recent advances in label-free real-time biosensing technologies utilizing different types of transducers to meet the growing demand for small-molecule detection.

Optimized helical intermedium-period fiber grating for breathing monitoring

The investigation into the spectral properties and refractive index (RI) sensitivities at low RI region of helical intermedium-period fiber gratings (HIPFGs) with varied periods ranging from 10-48 μm is presented in detail for the first time. The structure of HIPFG is optimized for RI sensing in the RI range of 1.3-1.33 by comparing the optical properties of HIPFGs with different grating periods. The HIPFG with optimized structure is demonstrated to have a high average sensitivity of 302.5 nm/RIU in the RI ranging from 1.3 to 1.33, which is two orders more elevated than the traditional long-period fiber gratings. The improved HIPFG is also experimentally applied to breath monitoring in different states. Normal breath, slow breath, fast breath, and unhealthy breath are distinguished based on breathing rate, intensity, and time of exhalation and inhalation. The fastest response time is determined to be 10 ms. The results demonstrate that the optical fiber's sensitivity in the low RI region can be increased by shortening its period, offering a special strategy for improving detection performance of HIPFGs. By verifying its performance in breathing monitoring, it is proved that the optimized HIPFG sensor has the great potential to expand medical applications.

Exploiting the design of surface plasmon resonance interfaces for better diagnostics: A perspective review

Surface Plasmon Resonance based-sensors are promising tools for precision diagnostics as they can provide tests useful for early and, whenever possible, non-invasive disease detection and monitoring. The design of novel, robust and effective interfaces enabling the sensing of a variety of molecular interactions in a highly selective and sensitive manner is a necessary step to obtain both accurate and reliable detection by SPR. This review covers the recent research efforts in this area, specifically emphasizing well-designed interfaces and applications in real-life samples. In particular, after a short introduction which identifies some of the critical challenges, the emerging strategies for the integration of the linker, the metal substrate and the recognition element on the sensing interface will be explored and discussed in three sections, as well as the opportunities for building SPR biosensors, easy to use, and with excellent sensitivities. Finally, a summary of some of the more promising and latest diagnostic applications will be provided, presenting a new window into the near-future perspectives.

Trace detection of canine distemper virus based on Michelson-interferometer sensing probe

A single-mode-fiber (SMF)-multimode-fiber (MMF)-tri-core-fiber (TCF) Michelson probe structure is proposed for trace detection of canine distemper virus (CDV). One end of the TCF is cut flat and fused with the multimode fiber, and the other end is coated with a silver film to enhance the reflection, and an optic-fiber sensing probe with SMF-MMF-TCF structure is obtained. The (PDDA/PSS)3 multilayer film is modified on the surface of the fiber by layer-by-layer self-assembly method as a polyelectrolyte binder to immobilize CDV antibodies to form a (PDDA/PSS)3 /CDV antibody composite membrane for specific detection of CDV antigens. The response-recovery test of the sensor is performed to verify its repeatability. The detection limit, the sensitivity, and the linear fitting degree for CDV antigen are 0.1236 pg/mL, 1.1776 dB/(pg/mL), and 0.9899, respectively. At the same time, the stability, selectivity, and clinical samples of the sensors were also verified.

Optical fiber-integrated achromatic metalens based on catenary metasurfaces

A challenge in all-fiber-integrated metasurface devices is to efficiently control dispersion in the limited fiber end area to build metasurfaces, therefore, the design of metasurfaces with a special structure becomes crucial to meet the demands of dispersion control. A unique phase response of circularly polarized light in catenary metasurfaces can offer new opportunities for polarization-sensitive arbitrary chromatic dispersion control. Herein, we proposed an optical achromatic metalens based on equal width catenary metasurfaces integrated on the large-mode optical fiber (LMF) end. To reduce phase distortions, the LMF is designed to generate quasi-plane waves (QPW), and then QPW converts from catenary metasurfaces to realize achromatic focusing. A notable feature of this device is its axial focal length shift as low as 0.09% across the working wavelength range from 1.33 µm to 1.55 µm, commonly used in optical fiber communication, demonstrating its excellent dispersion control capability. Furthermore, the device exhibits exceptional capabilities to break through the diffraction limit of the output field. This research has potential applications in the fields of achromatic devices, chromatic aberration correction, fiber lasers, and optical communication and modulation.

Plasmonic nanosensors for pharmaceutical and biomedical analysis

The detection and identification of clinical biomarkers with related sensitivity have become a source of considerable concern for biomedical analysis. There have been increasing efforts toward the development of single-molecule analytical platforms to overcome this concern. The latest developments in plasmonic nanomaterials include fascinating advances in energy, catalyst chemistry, optics, biotechnology, and medicine. Nanomaterials can be successfully applied to biomolecule and drug detection in plasmonic nanosensors for pharmaceutical and biomedical analysis. Plasmonic-based sensing technology exhibits high sensitivity and selectivity depending on surface plasmon resonance (SPR) or localized surface plasmon resonance (LSPR) phenomena. In this critical paper, we offer an overview of the methodology of the SPR, LSPR, surface-enhanced Raman scattering (SERS), surface-enhanced infrared absorption (SEIRA), surface-enhanced fluorescence (SEF), and plasmonic nanoplatforms advanced for pharmaceutical and biomedical applications. First of all, we present here a brief discussion of the above trends. We have devoted the last section to the explanation of SPR, LSPR, SERS, SEIRA, and SEF platforms, which have found a wide range of applications, and reviewed recent advances for biomedical and pharmaceutical analysis.

Highly sensitive, modification-free, and dynamic real-time stereo-optical immuno-sensor

Modification-free biosensing with high specificity and sensitivity is essential for miniaturized, online, integrated, and rapid, or even real-time molecular analyses. However, most optical biosensors are based on surface pre-modification or fluorescent labeling, and have either low sensitivity or low quality factor (Q). To address these difficulties, in this study, an optical sensor prototype was developed with a microbubble optofluidic channel integrated inside a Fabry-Pérot cavity to three-dimensionally tailor the intra-cavity light field via the intra-cavity lensing (microbubble) configuration. A high Q-factor (∼105), small mode volume, and high light energy density were experimentally achieved with this "stereo-sensor" while maintaining an ultrahigh refractive index (RI) sensitivity (679 nm/RIU) and ultra-small RI resolution (∼10-7 RIU at 950 nm). Moreover, specific detection of very low concentration of biomolecules (5 fg/mL for human IgG and 0.5 pg/mL for human serum albumin (HSA)) and wide range of protein concentrations (e.g., fg/mL-ng/mL for human IgG and pg/mL-ng/mL for HSA) without probe pre-modification were achieved owing to the RI change specifically associated with the probe-target binding and the corresponding bio-macromolecular conformation change. This modification-free stereosensing scenario is applicable to continuous, real-time, and multiplexed operations, thus showing potential for online, integrated, dynamic, biomolecular analyses in vitro or in vivo, such as the dynamic metabolic analysis of single cells or organoids and point-of-care tests.

Fibrous wearable and implantable bioelectronics

Fibrous wearable and implantable devices have emerged as a promising technology, offering a range of new solutions for minimally invasive monitoring of human health. Compared to traditional biomedical devices, fibers offer a possibility for a modular design compatible with large-scale manufacturing and a plethora of advantages including mechanical compliance, breathability, and biocompatibility. The new generation of fibrous biomedical devices can revolutionize easy-to-use and accessible health monitoring systems by serving as building blocks for most common wearables such as fabrics and clothes. Despite significant progress in the fabrication, materials, and application of fibrous biomedical devices, there is still a notable absence of a comprehensive and systematic review on the subject. This review paper provides an overview of recent advancements in the development of fibrous wearable and implantable electronics. We categorized these advancements into three main areas: manufacturing processes, platforms, and applications, outlining their respective merits and limitations. The paper concludes by discussing the outlook and challenges that lie ahead for fiber bioelectronics, providing a holistic view of its current stage of development.

High-sensitivity fiber optic temperature sensor based on CTFBG-FPI and Vernier effect

A novel high-sensitivity temperature sensor based on a chirped thin-core fiber Bragg grating Fabry-Perot interferometer (CTFBG-FPI) and the Vernier effect is proposed and demonstrated. With femtosecond laser direct writing technology, two CTFBG-FPIs with different interferometric cavity lengths are inscribed inside a thin-core fiber to form a Vernier effect system. The two FPIs consist of two pairs of CTFBGs with a full width at half maximum (FWHM) of 66.5 nm staggered in parallel. The interferometric cavity lengths of the two FPIs were designed to be 2 mm and 1.98 mm as the reference arm and sensing arm of the sensor, respectively. The temperature sensitivity of this sensor was measured to be -1.084 nm/°C in a range of 40-90°C. This sensor is expected to play a crucial role in precision temperature measurement applications.

Ultrasensitive and Specific Clustered Regularly Interspaced Short Palindromic Repeats Empowered a Plasmonic Fiber Tip System for Amplification-Free Monkeypox Virus Detection and Genotyping

The urgent necessity for highly sensitive diagnostic tools has been accentuated by the ongoing mpox (monkeypox) virus pandemic due to the complexity in identifying asymptomatic and presymptomatic carriers. Traditional polymerase chain reaction-based tests, despite their effectiveness, are hampered by limited specificity, expensive and bulky equipment, labor-intensive operations, and time-consuming procedures. In this study, we present a clustered regularly interspaced short palindromic repeats (CRISPR)/Cas12a-based diagnostic platform with a surface plasmon resonance-based fiber tip (CRISPR-SPR-FT) biosensor. The compact CRISPR-SPR-FT biosensor, with a 125 μm diameter, offers high stability and portability, enabling exceptional specificity for mpox diagnosis and precise identification of samples with a fatal mutation site (L108F) in the F8L gene. The CRISPR-SPR-FT system can analyze viral double-stranded DNA from mpox virus without amplification in under 1.5 h with a limit of detection below 5 aM in plasmids and about 59.5 copies/μL when in pseudovirus-spiked blood samples. Our CRISPR-SPR-FT biosensor thus offers fast, sensitive, portable, and accurate target nucleic acid sequence detection.

Analysis of Plasmonic Sensors Performance Realized by Exploiting Different UV-Cured Optical Adhesives Combined with Plastic Optical Fibers

Polymer-based surface plasmon resonance (SPR) sensors can be used to realize simple, small-size, disposable, and low-cost biosensors for application in several fields, e.g., healthcare. The performance of SPR sensors based on optical waveguides can be changed by tuning several parameters, such as the dimensions and the shape of the waveguides, the refractive index of the core, and the metal nanofilms used to excite the SPR phenomenon. In this work, in order to develop, experimentally test, and compare several polymer-based plasmonic sensors, realized by using waveguides with different core refractive indices, optical adhesives and 3D printed blocks with a trench inside have been used. In particular, the sensors are realized by filling the blocks' trenches (with two plastic optical fibers located at the end of these) with different UV-cured optical adhesives and then covering them with the same bilayer to excite the SPR phenomenon. The developed SPR sensors have been characterized by numerical and experimental results. Finally, in order to propose photonic solutions for healthcare, a comparative analysis has been reported to choose the best sensor configuration useful for developing low-cost biosensors.

A Novel Approach to Realize Plasmonic Sensors via Multimode Optical Waveguides: A Review

In recent decades, the Surface Plasmon Resonance (SPR) phenomenon has been utilized as an underlying technique in a broad range of application fields. Herein, a new measuring strategy which harnesses the SPR technique in a way that is different from the classical methodology was explored by taking advantage of the characteristics of multimode waveguides, such as plastic optical fibers (POFs) or hetero-core fibers. The sensor systems based on this innovative sensing approach were designed, fabricated, and investigated to assess their ability to measure various physical features, such as magnetic field, temperature, force, and volume, and to realize chemical sensors. In more detail, a sensitive patch of fiber was used in series with a multimodal waveguide where the SPR took place, to alter the mode profile of the light at the input of the waveguide itself. In fact, when the changes of the physical feature of interest acted on the sensitive patch, a variation of the incident angles of the light launched in the multimodal waveguide occurred, and, as a consequence, a shift in resonance wavelength took place. The proposed approach permitted the separation of the measurand interaction zone and the SPR zone. This meant that the SPR zone could be realized only with a buffer layer and a metallic film, thus optimizing the total thickness of the layers for the best sensitivity, regardless of the measurand type. The proposed review aims to summarize the capabilities of this innovative sensing approach to realize several types of sensors for different application fields, showing the high performances obtained by exploiting a simple production process and an easy experimental setup.

Fiber Optic SERS Sensor with Silver Nanocubes Attached Based on Evanescent Wave for Detecting Pesticide Residues

Surface-enhanced Raman scattering (SERS) has great potential in the field of rapid detection of pesticide residues in food. In this paper, a fiber optic SERS sensor excited by evanescent waves was proposed for efficient detection of thiram. Silver nanocubes (Ag NCs) were prepared as SERS active substrates, which had much stronger electromagnetic field intensity than nanospheres under laser excitation due to much more "hot spots". By using the method of electrostatic adsorption and laser induction, Ag NCs were uniformly assembled at the fiber taper waist (FTW) for enhancing the Raman signal. Different from the traditional way of stimulation, evanescent wave excitation greatly increased the interaction area between the excitation and analyte, while reducing the damage of the excited light to the metal nanostructures. The methods proposed in this work have been successfully used to detect the pesticide residues of thiram and showed good detection performance. The detection limits for 4-Mercaptobenzoic acid (4-MBA) and thiram were determined to be 10^-9 and 10^-8 M, the corresponding enhancement factor could be 1.64 × 10⁵ and 6.38 × 10⁴. Low concentration of thiram was detected in the peels of tomatoes and cucumbers, indicating its feasibility in actual sample detection. The combination of evanescent waves and SERS provides a new direction for the application of SERS sensors, which had great application potential in the field of pesticide residue detection.