Fluorescent hydrogel test kit coordination with smartphone: Robust performance for on-site dimethoate analysis

Ultrabright silicon nanoparticles combined with o-phenylenediamine for ratiometric fluorescence and smartphone imaging dual-mode detection of nitrite

Nitrite (NO2-) is widely present in the natural environment and human daily life. Excessive NO2- can cause harm to the environment and human health. Herein, silicon nanoparticles (SiNPs) with a fluorescence quantum yield of up to 70 % were synthesised using a one-pot hydrothermal method and combined with the common and inexpensive o-phenylenediamine (OPD) to achieve the detection of NO2-. Upon the addition of NO2-, the blue fluorescence of the SiNPs was quenched due to static quenching and Förster resonance energy transfer (FRET), while the yellow fluorescence of benzotriazole, the reaction product of OPD and NO2-, was enhanced, resulting in the fluorescence color change from blue to yellow. Based on these phenomena, a ratiometric fluorescence sensor integrated with smartphone imaging technology was developed. This sensor is notable for its portability, cost-effectiveness, and satisfactory detection limits (0.016 μM for ratiometric fluorescence and 1.64 μM for smartphone imaging). Importantly, it demonstrates high reliability and practicability in detecting NO2- in real water and food samples. This broadens the application of SiNPs in the sensing field and introduces new possibilities for NO2- detection in complex sample matrices.

A novel robust hydrogel-assisted paper-based sensor based on fluorescence UiO-66-NH2@ZIF-8 for the dual-channel detection of captopril

Captopril (CP) is commonly used as an active enzyme inhibitor for the treatment of coronary heart disease, hypertension and angina pectoris. The development of sensitive and efficient method for CP analysis is of great importance in biomedical research. Herein, we fabricated a sensitive and robust hydrogel-assisted paper-based sensor based on fluorescence UiO-66-NH2@ZIF-8 and Co, N-doped carbon nanozymes with oxidase-mimicking activity for accurate monitoring of captopril. The hydrogel-assisted paper-based sensor appeared a visible pink signal due to the catalytic oxidation of colorless N,N-diethyl-p-phenylenediamine (DPD) to oxDPD by Co, N-doped carbon-based nanozymes, and resulted in the fluorescence quenching of UiO-66-NH2@ZIF-8. In the presence of captopril, the oxidation of chromogenic substrate DPD by Co, N-doped nanozymes in the hydrogel-assisted paper-based sensor was hindered and accompanied by a change in the visible color, leading to recovery of the fluorescence of UiO-66-NH2@ZIF-8, and the change in the fluorescence color could also be observed. Therefore, the quantitative detection of captopril is achieved by taking a smartphone photograph and converting the image parameters into data information using ImageJ software. The portable hydrogel-assisted paper sensor provided sensitive detection of captopril in two modes based on visible color change as well as fluorescence color change with limits of detection of 0.45 μM and 0.47 μM, respectively. This hydrogel-assisted paper-based sensor has been successfully applied to the accurate monitoring of captopril in human serum, providing a potential avenue for in situ detection of captopril.

β-Galactosidase-triggered in situ synthesis of yellow emitting silicon nanoparticle and its application in visual detection of E. coli O157:H7 and drug susceptibility test

The sensitive detection of foodborne pathogenic and rapid antibiotic susceptibility testing (AST) is of great significance. This paper reports the enzyme-triggered in situ synthesis of yellow emitting silicon nanoparticles (SiNPs) and the detection of Escherichia coli (E. coli) O157:H7 in food samples and the rapid AST. The rapid counting of E. coli O157:H7 has been achieved through direct visual observation, equipment detection, and smartphone digitalization. A simple detection platform based on smartphone senses and cotton swabs has been established. Meanwhile, rapid AST based on enzyme-catalyzed SiNPs can intuitively obtain colorimetric samples. This paper established a system for bacterial enzyme-triggered in situ synthesis of SiNPs, with high responsiveness, luminescence ratio, and specificity. The detection limit for E. coli O157:H7 can reach 100 CFU/mL during 5 h, and the recovery efficiency ranges from 90.14% to 110.16%, which makes it a promising strategy for the rapid detection of E. coli O157:H7 and AST.

A smartphone-assisted portable sensing hydrogel modules based on UCNPs and Co3O4 NPs for fluorescence quantitation of hypoxanthine in aquatic products

Hypoxanthine is a promising index for evaluating the freshness of various aquatic products. Combined the hydrogels containing upconversion nanoparticles (UCNPs), Co3O4 NPs, and N-ethyl-N-(3-sulfopropyl)-3-methylaniline sodium salt/4-amino-antipyrine (TOPS/4-AAP) with a smartphone, a portable sensor was developed for the convenient, sensitive detection of hypoxanthine. With the H2O2 from xanthine oxidase (XOD)-catalyzed reactions of hypoxanthine, the fluorescence of UCNPs was effectively quenched by the purple product produced from the oxidization of TOPS/4-AAP catalyzed by Co3O4 NPs exhibiting peroxidase activity, among which the color change could be transformed into digital signals for quantification of hypoxanthine. The Green value in the RGB analysis of the fluorescence image was negatively proportional to hypoxanthine concentration in the range of 2.5-20 mg/L with a detection limit of 0.69 mg/L and a quantitation limit of 2.30 mg/L. Finally, this sensor was applied for hypoxanthine detection in real aquatic products, showing potential application for freshness evaluation of aquatic products.

Metal nanostructures in polymeric matrices for optical detection and removal of heavy metal ions, pesticides and dyes from water

Water pollutants such as heavy metal ions, pesticides, and dyes pose a worldwide issue. Their presence in water resources interferes with the normal growth mechanisms of living beings and causes long or short-term diseases. For this reason, research continuously tends to develop innovative, selective, and efficient processes or technologies to detect and remove pollutants from water. This review provides an up-to-date overview on metal nanoparticles loaded in polymeric matrices, such as hydrogels and membranes, and employed as optical sensors and as removing materials for water pollutants. The synthetic pathways of nanomaterials loading into polymeric matrices have been analyzed, particularly focusing on noble metal nanoparticles, noble metal nanoclusters, and metal oxide nanoparticles. Moreover, the sensing properties of modified matrices towards water pollutants have been discussed in addition to the interaction mechanisms between the sensors and the toxic compounds. The last part of the review has been devoted to illustrating the separation mechanism and removal performance of membranes loaded with nanomaterials in the treatment and purification of water streams from different contaminants (heavy metals, dyes and pesticides).

Development of nanocellulose hydrogels for application in the food and biomedical industries: A review

As the most abundant and renewable natural resource, cellulose has attracted significant attention and research interest for the production of hydrogels (HGs). To address environmental issues and emerging demands, the benefits of naturally produced HGs include excellent mechanical properties and superior biocompatibility. HGs are three-dimensional networks created by chemical or physical cross-linking of linear or branched hydrophilic polymers and have high capacity for absorption of water and biological fluids. Although widely used in the food and biomedical fields, most HGs are not biodegradable. Nanocellulose hydrogels (NC-HGs) have been extensively applied in the food industry for detection of freshness, chemical additives, and substitutes, as well as the biomedical field for use as bioengineering scaffolds and drug delivery systems owing to structural interchangeability and stimuli-responsive properties. In this review article, the sources, structures, and preparation methods of NC-HGs are described, applications in the food and biomedical industries are summarized, and current limitations and future trends are discussed.

In Situ Fabrication of Photoluminescent Hydrogen-Bonded Organic Framework-Functionalized Ca (II) Hydrogel Film for the Tetracyclines Visual Sensor and Information Security

A facilely in situ fabricated hydrogen-bonded organic framework (HOF) hydrogel film with perfect photoluminescent performance was designed for visual sensing of tetracycline antibiotics (TCs) and information security. Luminescent HOF (MA-IPA) was combined with sodium alginate (SA) through hydrogen bonding actions and electrostatic interactions, then cross-linked with Ca2+ ions to form HOF hydrogel film (Ca@MA-IPA@SA). The HOF hydrogel film exhibited exceptional mechanical robustness along with stable blue fluorescence and ultralong green phosphorescence. After exposure to TCs, Ca2+ was combined with TCs to generate a new green fluorescence exciplex (TC-Ca2+) in hydrogel films. Due to fluorescence resonance energy transfer, the fluorescence of MA-IPA was quenched, and the fluorescent color of the HOF hydrogel film was changed from blue to green. This dichromatic fluorescent response is convenient for the visual and rapid detection of TCs. The detection limits of tetracycline (TC), oxytetracycline (OTC), and chlortetracycline (CTC) were 5.1, 7.7, and 32.7 ng mL-1, respectively. Importantly, this hydrogel sensing platform was free of tedious operation and enabled the ultrasensitive and selective detection of TCs within 6 min. It has been successfully applied to TC detection in pork and milk samples. Based on the stable photoluminescence performance of HOF hydrogel films and fluorescent-responsive properties to TCs, two types of anticounterfeiting arrays were fabricated for information encryption and decryption. This work provides a novel approach for on-site detection of TCs and offers valuable insights into information security.

A deep learning-enabled smartphone platform for rapid and sensitive colorimetric detection of dimethoate pesticide

A novel deep learning-enabled smartphone platform is developed to assist a colorimetric aptamer biosensor for fast and highly sensitive detection of dimethoate. The colorimetric determination of dimethoate is based on the specific binding of dimethoate and aptamer, which leads to the aggregation of AuNPs in high-concentration NaCl solution, resulting in an obvious color change from red to blue. This color change provides sufficient data for self-learning enabled by a convolutional neural network (CNN) model, which is established to predict dimethoate concentration based on images acquired from a smartphone. To enhance user-friendliness for non-experts, the CNN model is then embedded into a smartphone app, enabling offline detection of dimethoate pesticide in real environments within just 15 min using a pre-configured colorimetric probe. The developed platform exhibits superior performance, achieving a regression coefficient of 0.9992 in the concentration range of 0-10 μM. Moreover, the app's performance is found to be consistent with the ELISA kit. These remarkable findings demonstrate the potential of combining colorimetric biosensors with smartphone-based deep learning methods for the development of portable and affordable tools for pesticide detection.

Ratiometric fluorescent hydrogel for point-of-care monitoring of organophosphorus pesticide degradation

The residues of organophosphorus pesticides have caused the potential risk in environment and human health, arousing worldwidely great concern. Herein, we fabricated a robust gold nanoclusters/MnO₂ composites-based hydrogel portable kit for accurate monitoring of paraoxon residues and degradation in Chinese cabbages. With the immobilization of gold nanoclusters/MnO₂ composites into a hydrogel, a ratiometric fluorescent signal is generated by catalyzing the oxidation of o-phenylenediamine, which possesses a built-in correction with low background interference. Coupling with acetylcholinesterase catalytic reactions and pesticide inhibition effect, the portable kit can sensitively detect paraoxon residues with a detection limit of 5.0 ng mL^-1. For on-site quantification, the fluorescent color variations of portable kit are converted into digital information that exhibits applicative linear range toward pesticide. Notably, the hydrogel portable kit was successfully applied for precisely monitoring the residue and degradation of paraoxon in Chinese cabbage, providing a potential pathway toward practical point-of-care testing in food safety monitoring.

Intelligently design primary aromatic amines derived carbon dots for optical dual-mode and smartphone imaging detection of nitrite based on specific diazo coupling

Primary aromatic amines derived carbon dots (PAA-CDs) with the protonated amino groups and high quantum yield of 46% were favorably obtained by one-step solvothermal treatment of m-phenylenediamine (m-PDA) in acidic environment. The interaction between the PAA-CDs and nitrite (NO₂^-) was inherited the characteristic reaction of m-PDA (a primary aromatic amine) and NO₂^-, resulting in strong fluorescence quenching and obvious absorption variation of the PAA-CDs. Meanwhile, a chromogenic reaction of diazo coupling can cause significant color changes. Hence, the PAA-CDs were developed for an optical dual-mode and smartphone imaging sensor for NO₂^- detection in the range of 3.0 ~ 40.0 μM with high selectivity, good sensitivity, and excellent anti-interference capability. A limit of detection (LOD) of 0.024 μM and 0.16 μM was implemented by fluorometry and colorimetry, respectively. For smartphone imaging colorimetry, the LODs of 0.46 μM (visible color) and 0.99 μM (fluorescence color) were acquired. More importantly, the established sensor has been successfully applied for the dynamic detection of NO₂^- in various food samples with the satisfying results. A smartphone imaging colorimetry method based on the CDs was firstly proposed to visually and quantitatively detect NO₂^-, which will broaden the application range of the CDs in food safety inspection.

Effective Electrochemiluminescence Aptasensor for Detection of Atrazine Residue

According to the chemiluminescence characteristics of the luminol-hydrogen peroxide (H₂O₂) system, this work designed a novel and effective electrochemiluminescence (ECL) aptasensor to detect atrazine (ATZ) rapidly. Silver nanoparticles (AgNPs) could effectively catalyze the decomposition of H₂O₂ and enhance the ECL intensity of the luminol-H₂O₂ system. Once ATZ was modified on the aptasensor, the ECL intensity was significantly weakened because of the specific combination between ATZ and its aptamer. Therefore, the changes in ECL intensity could be used to detect the concentration of ATZ. Under optimal detecting conditions, the aptasensor had a wide linear range from 1 × 10⁻³ ng/mL to 1 × 10³ ng/mL and a low limit of detection (3.3 × 10⁻⁴ ng/mL). The designed aptasensor had the advantages of good stability, reproducibility, and specificity. The aptasensor could be used to detect the ATZ content of tap water, soil, and cabbage and had satisfactory results. This work effectively constructs a novel, effective, and rapid ECL aptasensor for detecting ATZ in actual samples.

A Portable Fluorescent Hydrogel-Based Device for On-Site Quantitation of Organophosphorus Pesticides as Low as the Sub-ppb Level

Portable devices possess powerful application prospects in on-site sensing without the limitation of bulky instruments. Given the relevance of pesticides to food safety, we herein fabricated a robust gold nanocluster (AuNC)-based hydrogel test kit for precisely quantified chlorpyrifos by using a three-dimensional (3D) printed subsidiary device. In this work, the fluorescence of AuNC-based hydrogel could be efficiently quenched by cobalt oxyhydroxide nanoflakes (CoOOH NFs) through the Förster resonance energy transfer effect. Chlorpyrifos as an acetylcholinesterase inhibitor controls the enzymatic hydrolysis reaction and further regulates the production of thiocholine that could decompose CoOOH nanoflakes into Co2+, resulting in the fluorescence response of AuNC-based hydrogel. By using a homemade subsidiary device and smartphone, the fluorescence color was transformed into digital information, achieving the on-site quantitative detection of chlorpyrifos with the limit of detection of 0.59 ng ml−1. Owing to specific AuNC signatures and hydrogel encapsulation, the proposed fluorescence hydrogel test kit displayed high sensitivity, good selectivity, and anti-interference capability in a real sample analysis, providing great potential in on-site applications.

Advances in organophosphorus pesticides pollution: Current status and challenges in ecotoxicological, sustainable agriculture, and degradation strategies

Organophosphorus pesticides (OPPs) are one of the most widely used types of pesticide that play an important role in the production process due to their effects on preventing pathogen infection and increasing yield. However, in the early development and application of OPPs, their toxicological effects and the issue of environmental pollution were not considered. With the long-term overuse of OPPs, their hazards to the ecological environment (including soil and water) and animal health have attracted increasing attention. Therefore, this review first clarified the classification, characteristics, applications of various OPPs, and the government's restriction requirements on various OPPs. Second, the toxicological effects and metabolic mechanisms of OPPs and their metabolites were introduced in organisms. Finally, the existing methods of degrading OPPs were summarized, and the challenges and further addressing strategy of OPPs in the sustainable development of agriculture, the environment, and ecology were prospected. However, methods to solve the environmental and ecological problems caused by OPPs from the three aspects of use source, use process, and degradation methods were proposed, which provided a theoretical basis for addressing the stability of the ecological environment and improving the structure of the pesticide industry in the future.

Integrating smartphone-assisted ratiometric fluorescent sensors with in situ hydrogel extraction for visual detection of organophosphorus pesticides

Rapid, reliable and on-site detection of organophosphorus pesticides (OPs) on fruit or vegetable surfaces is necessary in real life.

Recent advances and perspectives of enzyme-based optical biosensing for organophosphorus pesticides detection

The overuse or abuse of organophosphorus pesticides (OPs) can bring about severe contamination problems in foodstuff and the environment, which will seriously threaten human health and the ecosystem's cycle. Hence, it is in high demand to establish sensitive, portable, specific, and cost-effective methods for monitoring OPs to control food safety, protect the ecosystem, and prevent disease. The optical biosensor with enzyme as bio-recognition elements has been an effective alternative for OPs detection. Herein, we firstly introduce various enzymes, sensing mechanisms, advantages and disadvantages used as bio-recognition elements in optical sensing for OPs detection. Then, we review various optical biosensing strategies based on enzymes as recognition elements that were ingeniously designed and successfully utilized for OPs detection, with a particular emphasis on photoluminescence (PL), chemiluminescence (CL), electrochemiluminescence (ECL), and colorimetric (CM) biosensing strategies. We not only highlight the state-of-art developments and the construction strategies of the enzyme-based optical biosensing method but also summarize the existing deficiencies, current challenges, and the future perspectives of OPs detection.

Background-free sensing platform for on-site detection of carbamate pesticide through upconversion nanoparticles-based hydrogel suit

On-site monitoring of carbamate pesticide in complex matrix remians as a challenge in terms of the real-time control of food safety and supervision of environmental quality. Herein, we fabricated robust upconversion nanoparticles (UCNPS)/polydopamine (PDA)-based hydrogel portable suit that precisely quantified carbaryl in complex tea samples with smartphone detector. UCNPS/PDA nanoprobe was developed by polymerization of dopamine monomers on the surface of NaErF₄: 0.5% Tm³⁺@NaYF₄ through electrostatic interaction, leading to efficient red luminescence quenching of UCNPS under near-infrared excitation, which circumvented autofluorescence and background interference in complicated environment. Such a luminescence quenching could be suppressed by thiocholine that was produced by acetylcholinesterase-mediated catalytic reaction, thus enabling carbaryl bioassay by inhibiting the activity of enzyme. Bestowed with the feasibility analysis of fluorescent output, portable platform was designed by integrating UCNPS-embedded sodium alginate hydrogel with 3D-printed smartphone device for quantitatively on-site monitoring of carbaryl in the range of 0.5-200 ng mL^-1 in tea sample, accompanied by a detection limit of 0.5 ng mL^-1. Owing to specific UCNPS signatures and hydrogel immobilization, this modular platform displayed sensitive response, portability and anti-interference capability in complex matrix analysis, thus holding great potential in point-of-care application.

Biodegradation of the organophosphate dimethoate by Lactobacillus plantarum during milk fermentation

Bioremediation of pesticides in contaminated foodstuffs using probiotics has attracted great attention in recent years, but some intermediate products may have profound effects on the toxicity of treated food. Therefore, this work studied the degradation mechanism of dimethoate in milk by L. plantarum, and analyzed the toxicity of degradation products. The results showed that under the optimal conditions, L. plantarum can degrade 81.28% of dimethoate. Dimethoate had high binding affinities to phosphatase with the free energy of -16.67 kcal/mol, and amino acid residues, Gln375 and SER415 played important roles in the catalysis process. Five degradation products were identified using UPLC-QTOF/MS, and their toxicity was estimated using quantitative structure-activity relationship models. Some intermediate products were predicted to be toxic, which should not be ignored, but the overall toxicity of milk decreased after fermentation. Furthermore, the pH and titratable acidity of the fermented milk were 4.25 and 85 ^◦T, respectively.

An efficient LSPR method to quantitatively detect dimethoate: Development, characterization and evaluation

In recent years, there has been growing concern among consumers about pesticide contamination in fruits. Therefore, rapid, reliable, and consistent detection methods for OPPs, especially dimethoate, are crucially needed. The existing quantitative methods for detecting dimethoate are not suitable for rapid measuring system such as the dimethoate samples from two channels. Hence this paper examines the utilization of a dual-channel system for utilize the absorption variations of the Localized Surface Plasmon Resonance (LSPR) bands of gold nanoparticles (AuNPs) were investigate for detection of dimethoate. Under optimized conditions, the relationship between concentrations of dimethoate and absorbance ratios (A(520)/A(640)) was linearly found in the concentration range of 10–100 nM. Result from the experiment shows that both channels exhibit a linear correlation coefficient as high as 0.97 and a limit of detection (LOD) as low as 5.5 nM. This LSPR detection system was characterized by testing the dimethoate in apple samples and the recovery rates were found to be in the range of 85.90% to 107.37%. The proposed dual-channel LSPR system for detecting dimethoate creating a new approach for detecting organophosphate insecticide in agricultural fields. It could lay the foundation for designing a high-throughput analysis of the insecticides using a wavelength division multiplexing switch (WDMS).

Lab in hydrogel portable kit: On-site monitoring of oxalate

Oxalate is commonly employed as adjuvant of pesticide agent, causing renal injury of human even in trace residues. Despite the great achievements of the existing point-of-care testing (POCT) technology, accurate on-site screening of oxalate remains a tricky issue. To this aim, we proposed a "lab in a tube" platform which integrated portable hydrogel kit with smartphone for real-time monitoring of oxalate to achieve quantitatively precise analysis. In this work, a stimuli-responsive hydrogel-based kit was constructed via embedding manganese dioxide (MnO₂) nanosheets into sodium alginate hydrogel system. Based on the intrinsic oxidase-like activity, MnO₂ nanosheets-based nanozyme triggered color reaction by introducing a common sensing probe 3,3',5,5'-tetramethylbenzidine. Meanwhile, the presence of oxalate would decompose MnO₂ nanosheets, inducing the decrease of nanozyme activity, which resulted in the color response of portable kit. Coupling with ImageJ software, the image information of kit captured via smartphone could be transduced into the hue intensity, which provided a directly quantitative tool to detect oxalate with a detection limit of 8.0 μmol L^-1. This portable smartphone biosensor was successfully applied for screening urine sample within 10 min for high-throughput analysis (twelve samples) without the need for any advanced analytical instruments. Based on the merits of simple operation, cost-efficiency, and good selectivity, the availability of the miniaturized biosensor platform for POCT will achieve the requirements of routine screening and disease prevention.

Luminescent europium(III)-organic framework for visual and on-site detection of hydrogen peroxide via a tablet computer

A luminescent metal-organic framework of type Eu(III)-MOF has been fabricated for visual and on-site fluorometric determination of hydrogen peroxide (H₂O₂) via a tablet computer. The maximum excitation and emission peaks of type Eu(III)-MOF were found at λex = 290 nm and λem = 615 nm, respectively. The average length of Eu-MOF is 1.21 ± 0.07 μm. In the presence of the target H₂O₂, Fe²⁺ is transmitted into Fe³⁺ via Fenton reaction, leading to a fluorescence quenching of Eu-MOF. Therefore, visible color change occurred from bright red into colorless. Interestingly, by means of tablet computer's digital camera and ImageJ software, fluorescent signals were captured and transduced into digital parameters, resulting in a linear relationship between fluorescence intensity and the concentration of H₂O₂. As a result, the determination of H₂O₂ without the aid of complicated instruments is achieved in the range 2.0 μM to 0.2 mM with a detection limit of 1.02 μM. Our approach has been successfully applied to quantify H₂O₂ in serum, urine, and waste water with good recovery and precision (< 2.5% RSD). Besides, our assay has been exploited for visual detection of H₂O₂ released from HepG2 cells with the advantages of portability and accuracy. Moreover, the strategy displays acceptable selectivity and stability. Hence, our assay provides an alternative practical method for on-site determination of H₂O₂ without the need for instruments. Graphical abstract Schematic representation of the synthesis procedure of a luminescent Eu-MOF, which has been successfully applied for on-site detection of H₂O₂ via Fenton reaction and imaging analysis technique. The method exhibits handheld and accuracy for H₂O₂ determination, holding the potential for biochemical and clinical applications in remote regions.

Portable Smartphone-Based QDs for the Visual Onsite Monitoring of Fluoroquinolone Antibiotics in Actual Food and Environmental Samples

Accurate onsite profiling of fluoroquinolone antibiotics (FQs) is of vital significance for ensuring food safety and estimating environmental pollution. Here, we propose a smartphone-based QD ratiometric fluorescence-sensing system to precisely report the level of FQs. As a proof of concept, we chose gatifloxacin (GFLX, a typical member of FQs) as the model for the analytical target, which could effectively trigger the fluorescence color variation of QDs from bright yellow-green (∼557 nm) to blue (∼448 nm) through the photoinduced electron-transfer (PET) process, thus yielding an evident ratiometric response. Based on this, the level of GFLX can be reported within a wide linear range from 0.85 nM to 3.6 μM. Moreover, this assay owns a high sensitivity with a low detection limit of 0.26 nM for GFLX and a quick sample-to-answer monitoring time of 5.0 min, manifesting that this platform could be fully qualified for onsite requirements. Interestingly, this portable device has successfully been applied for the onsite detection of GFLX in real food (i.e., milk and drinking water) and environmental (i.e., fish-farming water) samples with acceptable results. This developed platform offers a great promise for the point-of-care detection of FQ residues in practical application with the merits of being label-free, low-cost, and rapid, thus opening a new pathway for the onsite evaluation of food safety and environmental health.

Rheology of partially and totally oxidized red seaweed galactans

Agarose and κ-carrageenan were oxidized using (2,2,6,6-tetramethylpiperidinyl)oxy (TEMPO) in the presence of NaOCl and NaBr. Products with several degrees of oxidation were structurally characterized. The mechanical spectra were determined: derivatives with a medium to high degree of oxidation give rise to polysaccharides that behave like dilute solutions in water, whereas those with a degree of oxidation close to 20 % keep the gelling properties with a different thermo-rheological response towards pH (6.5 or 4.0) and counterions (K⁺ or Ca²⁺) in comparison with the native polysaccharides. For instance, they showed a marked dependence on the presence of calcium ions, observed in the increase of thermal stability and dynamic elastic component (G') value, due to the known interaction of this divalent cation with the carboxylate groups. In this sense, these derivatives with low oxidation degrees have proven to be not only thermosensitive, like the native polysaccharide, but also pH- and calcium-sensitive.