Dual-mode visible light-induced aptasensing platforms for bleomycin detection based on CdS-In2S3 heterojunction

An ATMND/SGI based three-way junction ratiometric fluorescent probe for rapid and sensitive detection of bleomycin

In this work, we developed a rapid and sensitive label-free ratiometric fluorescent (FL) probe for the detection of bleomycin (BLM). The probe consists of a DNA sequence (D6) and two fluorophore groups, 2-amino-5,6,7-trimethyl-1,8-naphthalene (ATMND) and SYBR Green I (SGI). The D6 sequence could be folded into a three-way junction structure containing a C-C mismatch position in the junction pocket. The unique "Y" structure not only could entrap ATMND in the mismatch pocket with high affinity, leading to FL quenching at 408 nm, but also embed SGI in the grooves of the double-stranded portion, resulting in FL enhancement at 530 nm. In the presence of BLM-Fe(II), the "Y" structure of D6 was destroyed due to the specific cleavage of the BLM recognition site, the 5'-GT-3' site in D6. This caused the release of ATMND and SGI and thus the ratiometric signal change of FL enhancement by ATMND and FL quenching by SGI. Under optimal conditions, the ratiometric probe exhibited a linear correlation between the intensity ratio of F408/F530 and the concentration of BLM in the range of 0.5-1000 nM, with a detection limit of 0.2 nM. In addition, the probe was applied to detect BLM in human serum samples with satisfactory results, indicating its good clinical application potential.

Rational design of cuprofullerene bipyridine nanozyme with high peroxidase-like activity for colorimetric sensing of bleomycin

The high catalytic activity of Cu-based nanozymes mainly depends on the efficient Fenton-like reaction of Cu+/ H2O2, but Cu+ cannot exist stably. Trying to find a material that can stably support Cu+ while promoting the electron cycle of Cu2+/Cu+ still faces serious challenges. C60 is expected to be an ideal candidate to solve this problem due to its unique structure and rich physicochemical properties. Here, we designed and synthesized a C60-doped Cu+-based nanozyme (termed as C60-Cu-Bpy) by loading high catalytic active site Cu+ onto C60 and coordinating with 2,2'-bipyridine (Bpy). The single crystal diffraction analysis and a series of auxiliary characterization technologies were used to demonstrate the successful preparation of C60-Cu-Bpy. Significantly, the C60-Cu-Bpy exhibited superior peroxidase-like activity during the catalytic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). Then, the catalytic mechanism of C60-Cu-Bpy as peroxidase was elucidated in detail, mainly benefiting from the dual function of C60. On the one hand, C60 acted as a carrier to directly support Cu+, which has the ability to efficiently decompose H2O2 to produce reactive oxygen species. The other was that C60 acted as an electron buffer, contributing to promoting the Cu2+/Cu+ cycle to facilitate the reaction. Furthermore, a colorimetric sensor for the quantitative analysis of bleomycin was established based on the principle of bleomycin specific inhibition of C60-Cu-Bpy peroxidase-like activity, with satisfactory results in practical samples. This study provides a new strategy for the direct synthesis of Cu+-based nanozymes with high catalytic performance.

Carbon dots with selective fluorescence response to hydroxyl radical for sensitive detection of bleomycin

In this work, antioxidant carbon dots (ACDs) with high quantum yield (63.98%) were developed through a one-step strategy using citric acid, ethylenediamine, and L-arginine as sources. The ACDs demonstrated excellent in vitro antioxidant activity. Additionally, ACDs displayed a unique fluorescence response to hydroxyl radical (OH). Leveraging this distinctive feature, a selective and sensitive fluorescence-based sensor was developed for detecting bleomycin (BLM) in the presence of ferrous ions (Fe2+). The studies on the oxidizing properties and dynamic quenching mechanism of ACDs by OH suggested that OH reduced the contents of the amino and hydroxyl groups of ACDs, leading to a decreased electron cloud density of ACDs for dynamic quenching of ACDs. Under optimally refined conditions, the detection limit of this strategy for BLM was 0.58 μg/mL, with a linear range spanning from 1 to 24 μg/mL when employing ACDs as the probe. This fluorescence sensing strategy provides a promising method for the detection of BLM in clinical samples.

A membrane/mediator-free high-power density dual-photoelectrode PFC aptasensor for lincomycin detection in milk and chicken

Over use of lincomycin (LIN) as antibiotic in animals can lead to multiple harmful impacts to public health, thus detection of LIN at trace level in milk and chicken sample matrixes is vital. In this work, Zinc phthalocyanine nanoparticles sensitized MoS₂ (ZnPc/MoS₂) was firstly developed as a novel photocathode material combined with nitrogen-doped graphene-loaded TiO₂ nanoparticles (TiO₂/NG) as photoanode material to construct a dual-photoelectrode photofuel cell (PFC). The as-prepared membrane/mediator-free PFC achieved excellent output performance that the maximum power density (P_max) reached 11.83 μW cm^-2. Specific aptamers are adopted as LIN recognition elements, the as-proposed self-powered aptasensor for LIN exhibited a linear scope in 10^-11 -10^-5 mol L^-1 along with a low detection limit (3S/N) of 3.33 pmol L^-1. Consequently, such high-power density dual-photoelectrode PFC aptasensor may be a reassuring candidate electrochemical sensor for the detection of trace contamination in food samples.

Synergy of photocatalysis and fuel cells: A chronological review on efficient designs, potential materials and emerging applications

The rising demand of energy and lack of clean water are two major concerns of modern world. Renewable energy sources are the only way out in order to provide energy in a sustainable manner for the ever-increasing demands of the society. A renewable energy source which can also provide clean water will be of immense interest and that is where Photocatalytic Fuel Cells (PFCs) exactly fit in. PFCs hold the ability to produce electric power with simultaneous photocatalytic degradation of pollutants on exposure to light. Different strategies, including conventional Photoelectrochemical cell design, have been technically upgraded to exploit the advantage of PFCs and to widen their applicability. Parallel to the research on design, researchers have put an immense effort into developing materials/composites for electrodes and their unique properties. The efficient strategies and potential materials have opened up a new horizon of applications for PFCs. Recent research reports reveal this persistently broadening arena which includes hydrogen and hydrogen peroxide generation, carbon dioxide and heavy metal reduction and even sensor applications. The review reported here consolidates all the aspects of various design strategies, materials and applications of PFCs. The review provides an overall understanding of PFC systems, which possess the potential to be a marvellous renewable source of energy with a handful of simultaneous applications. The review is a read to the scientific community and early researchers interested in working on PFC systems.

Zinc-Air Battery-Based Self-Powered Sensor with High Output Power for Ultrasensitive MicroRNA let-7a Detection in Cancer Cells

Self-powered sensors do not require a power supply and are easy to miniaturize, which have potential for constructing wearable, portable, and real-time detection devices. However, it is challenging for the detection of low abundant targets due to the low output power density of fuel cells and much interference of complex biological environment. Herein, a new kind of photocatalytic zinc-air battery-based self-powered electrochemical sensor (ZAB-SPES) was constructed for the detection of microRNA let-7a (miRNA let-7a) by combining magnetic nanobeads (MBs) with a metal-organic framework loaded with glucose oxidase (MOFs@GOX). Poly(1,4-di(2-thienyl))benzene (PDTB) was used as the photocathode material, and the proposed ZAB-SPES had a high power density of 22.8 μW/cm², which was 2-3-fold of commonly used photofuel cells. MBs can capture and separate miRNA from complex samples quickly with a high separation efficiency of 99% within 60 s. The competitive reaction of oxygen reduction reaction between PDTB and MOFs@GOX would change the output power density of the ZAB-SPES. Based on the relationship between output power density and target concentration, the ZAB-SPES realized ultrasensitive detection of miRNA let-7a with a detection limit down to 1.38 fM. Furthermore, the successful detection of miRNA let-7a in A549 cancer cells indicated the great prospects of ZAB-SPES in clinical analysis and early diagnosis of cancers.

Self-powered Aptasensors Made with the In2O3-In2S3-Ti3C2 Composite for Dual-mode Detection of Microcystin-LR

A dual-mode self-powered aptasensing platform of photoelectrochemical (PEC) and photofuel cell (PFC) was constructed for Microcystin-LR (MC-LR) detection. Specifically, the In₂O₃-In₂S₃-Ti₃C₂ (IO-IS-TC) composite was facilely assembled on the base of MOF-derived In₂O₃ hollow tubulars, and the integrated mechanism and photoconversion efficiency are proposed and discussed in detail. Herein, a promising dual-mode sensing platform was constructed using the IO-IS-TC composite as a photoanode matrix with higher output power and obvious photocurrent response. Moreover, the dual-mode sensing platform did not require external bias and the addition of sacrificial agents under visible light irradiation. The enhanced PEC properties can be attributed to the matched energy level of ternary components and the improved separation of photogenerated carriers. Moreover, aptamer-based recognition was adopted to catch MC-LR molecules, which realized the highly sensitive and selective detection. The PFC aptasensor was exhibited at 50-5 × 10⁵ pmol/L with a detection limit of 17.4 pmol/L, and the PEC aptasensor was realized from 0.5 to 4 × 10⁵ pmol/L with a detection limit of 0.169 pmol/L. The proposed aptasensing platform showed good specificity, reproducibility, and stability, which paved the way for the construction of a fast and ultrasensitive PEC sensing methodology for environmental analysis.

Visible-Light-Assisted Photoelectrochemical Biosensing of Uric Acid Using Metal-Free Graphene Oxide Nanoribbons

In this study, we demonstrate the visible-light-assisted photoelectrochemical (PEC) biosensing of uric acid (UA) by using graphene oxide nanoribbons (GONRs) as PEC electrode materials. Specifically, GONRs with controlled properties were synthesized by the microwave-assisted exfoliation of multi-walled carbon nanotubes. For the detection of UA, GONRs were adopted to modify either a screen-printed carbon electrode (SPCE) or a glassy carbon electrode (GCE). Cyclic voltammetry analyses indicated that all Faradaic currents of UA oxidation on GONRs with different unzipping/exfoliating levels on SPCE increased by more than 20.0% under AM 1.5 irradiation. Among these, the GONRs synthesized under a microwave power of 200 W, namely GONR(200 W), exhibited the highest increase in Faradaic current. Notably, the GONR(200 W)/GCE electrodes revealed a remarkable elevation (~40.0%) of the Faradaic current when irradiated by light-emitting diode (LED) light sources under an intensity of illumination of 80 mW/cm². Therefore, it is believed that our GONRs hold great potential for developing a novel platform for PEC biosensing.

Novel Anti-Interference Strategy for a Self-Powered Sensor: Mediator-Free and Biospecific Photocathode Interface

As a new electrochemical sensing concept, a self-powered sensor shows a good application prospect in the field of analysis. However, it is still a great challenge to improve the anti-interference capability of sensors through reasonable design. In this study, we investigated the difference between the single photoanode and photocathode self-powered sensor and combined the advantages of these two aspects to fabricate a mediator-free self-powered aptasensor based on the dual-photoelectrode system, which combined the biological events from the photocathode. The biological events occurred at the photocathode could avoid the interference caused by the generated hole oxidation of reducing small molecules in the real sample on the photoanode surface, which was helpful to enhance the anti-interference capability of the sensor. Moreover, due to the sufficient Fermi level differentiation between two photoelectrodes, the redox mediator was not necessary. This could avoid the redox reaction caused by the introduction of extra electron donors or electron acceptors occurring before the photoelectrical behavior, thus improving the accuracy of the sensor. According to the influence of the generated biological conjugate on the external circuit, electron transmission between interfaces, and the obstruction of visible light irradiation, the sensitive and accurate detection of the analytical model was achieved. This work provided a proof-of-concept for the establishment of a mediator-free dual-photoelectrode self-powered sensing platform with high sensitivity and strong anti-interference performance.

A dual-photoelectrode photofuel cell based self-powered aptasensor using a multimeter as a direct visual readout strategy

A self-powered aptasensor based on a dual-photoelectrode photofuel cell, whose maximum power density and open circuit potential respectively reached 10.77 μW cm-2 and 0.664 V, was proposed combined with a digital multimeter as a direct visual readout strategy, providing a meaningful perspective for miniaturized, implantable, and on-site sensors.

Fluorescent and colorimetric dual-mode detection of tetracycline in wastewater based on heteroatoms-doped reduced state carbon dots

A large amount of tetracycline (TC) persists in water, soil, food, and feed due to the overuse of antibiotics, causing serious environmental problems such as damage to ecosystems and posing risks to human health. Thus, there is an urgent need to find a method to detect TC that is practical, rapid, sensitive, and offers ready visualization of TC levels so that adequate remediation measures can be immediately implemented. Herein, we report a fluorescent and colorimetric dual-mode nanosensor for the detection of TC based on reduced state carbon dots (r-CDs). In the presence of TC, the emission fluorescence of r-CDs was quenched by the Förster resonance energy transfer mechanism to achieve high-sensitivity detection of TC with a low limit of detection (LOD) of 1.73 nM. Moreover, TC was also detected by r-CDs via a noticeable color change of the solution (from colorless to red) with the naked eye, having an LOD of 0.46 μM. Furthermore, r-CDs have excellent selectivity and sensitivity in detecting TC in wastewater, and therefore, have practical applications in wastewater treatment. The fluorescent and colorimetric dual-mode proposed in this work may offer a unique idea for the detection of TC, with great prospects for environmental wastewater applications.

Rapid Potentiometric Detection of Chemical Oxygen Demand Using a Portable Self-Powered Sensor Chip

Chemical oxygen demand (COD) is an important indicator of organic pollutants in water bodies. Most of the present testing methods have the disadvantages of having complicated steps, being time-consuming, and using toxic and hazardous substances. In this work, rapid potentiometric detection of chemical oxygen demand (COD) using a portable self-powered sensor chip was successfully developed. The indium tin oxide (ITO) electrode was etched by laser, and the photocatalytic materials TiO₂/CuS and Pt were modified onto the photoanode and the cathode to prepare the sensor chip. Based on the principle of photocatalytic degradation, organic pollutants can be oxidized by TiO₂/CuS, and the concentration will affect the generated voltage. The quantitative detection of COD in the range of 0.05-50 mg/L can be rapidly achieved within 5 min by a miniature device. Besides good portability and sensitivity, the proposed sensor also has the advantages of environmental friendliness and ease of use, which is an ideal choice for the on-site detection of water pollution.

Self-Powered Photoelectrochemical Aptasensor for Oxytetracycline Cathodic Detection Based on a Dual Z-Scheme WO3/g-C3N4/MnO2 Photoanode

With the high sensitivity and anti-interference provided by a dual Z-scheme structure photoanode and a two-electrode system, a high-performance self-powered photoelectrochemical (PEC) aptasensor for oxytetracycline (OTC) detection was established in this work. Graphitic carbon nitride (g-C₃N₄) with excellent photoelectric properties was used to be combined with WO₃ and MnO₂ to form a kind of dual Z-scheme heterojunction. The designed unique structure and the complementary performances of the three materials collectively guaranteed the highly stable photocurrent output of the photoanode due to the wide range of light absorption and the high separation rate of electron-hole pairs. The aptamer-based cathode modified with reduced graphene oxide (rGO) and Au nanoparticles (Au NPs) provided high conductivity and aptamer-binding sites, which brought excellent selective recognition of OTC as well as the self-powered capacity by receiving electrons from the photoanode. In the PEC sensing of OTC, the device presented a wide detection range from 1 pM to 150 nM and a low detection limit of 0.1 pM. Besides, the developed PEC aptasenor showed good selectivity, reproducibility, and stability, so as to be applied to real samples. The proposed PEC sensing method can be considered an effective and promising direction for the detection of antibiotics in the future.

Amplified photocurrent signal for fabricating photoelectrochemical sulfadimethoxine aptasensor based on carbon nitride photosensitization with visible/near-infrared light responsive zinc phthalocyanine

Developing effective analytical method for sulfadimethoxine (SDM) detection is highly desirable and vitally crucial for protecting environment safety and human health. Herein, a highly selective and sensitive photoelectrochemical (PEC) aptasensor for accurate detection of SDM was proposed, which employed zinc phthalocyanine/graphitic carbon nitride (ZnPc/CN) nanocomposite as photosensitive material. The ZnPc/CN nanocomposite was constructed by modification of CN nanosheet with visible/near-infrared light responsive photosensitizer ZnPc. The introduction of ZnPc into CN exhibited amplified PEC response, which was 5.7 and 18.3 times than pure ZnPc and CN, attributed to the enhanced light harvesting ability and improved photoelectric conversion efficiency of such nanocomposite. By using ZnPc/CN and sulfadimethoxine (SDM) aptamer as PEC response material and specific probe, a PEC aptasensor was established for SDM detection. The aptamer was connected to the surface of chitosan/ZnPc/CN/ITO through the formation of phosphoramidate bonds between the amino group of the chitosan and phosphate group of the aptamer at 5' end. The fabricated aptasensor displayed good detection linearity of 0.1 ~ 300 nM and low detection limit of 0.03 nM (S/N = 3) under optimized conditions, and the potential applicability of the PEC aptasensor was confirmed by detecting SDM in milk powder samples.