An enzyme-free electrochemical biosensor based on well monodisperse Au nanorods for ultra-sensitive detection of telomerase activity

A Comparison of DNA-DNA Hybridization Kinetics in Complex Media on Planar and Nanostructured Electrodes

A comprehensive investigation into how nanostructures alter real-time DNA hybridization kinetics in both buffer and complex media and under a wide range of probe and target concentrations is currently lacking. In response, we use a real-time, wash-free, and in situ assay to study DNA hybridization kinetics by performing continuous electrochemical measurements in different media. We investigated the differences in hybridization kinetics under three regimes of probe density (low, medium, and high) and over three orders of magnitude of target concentrations (0.01-1 μM). Additionally, we compared the performance of planar and nanostructured electrodes in buffer, blood, urine, and saliva. Our experiments indicate that adding nanostructures to the transducer surface is only effective under a specific probe/target concentration regime. Additionally, we found that direct electrochemical readout is possible in the examined physiological media, with measurements in blood showing the highest and saliva showing the lowest signal magnitudes compared to buffer.

Application of surfactants in the electrochemical sensing and biosensing of biomolecules and drug molecules

Realizing sensitive and efficient detection of biomolecules and drug molecules is of great significance. Among the detection methods that have been proposed, electrochemical sensing is favored for its outstanding advantages such as simple operation, low cost, fast response and high sensitivity. The unique structure and properties of surfactants have led to a wide range of applications in the field of electrochemical sensors and biosensors for biomolecules and drug molecules. Through the comparative analysis of reported works, this paper summarizes the application modes of surfactants in electrochemical sensors and biosensors for biomolecules and drug molecules, explores the possible electrocatalytic mechanism of their action, and looks forward to the development trend of their applications. This review is expected to provide some new ideas for subsequent related research work.

Bonding states of gold/silver plasmonic nanostructures and sulfur-containing active biological ingredients in biomedical applications: a review

As one of the most instrumental components in the architecture of advanced nanomedicines, plasmonic nanostructures (mainly gold and silver nanomaterials) have been paid a lot of attention. This type of nanomaterial can absorb light photons with a specific wavelength and generate heat or excited electrons through surface resonance, which is a unique physical property. In innovative biomaterials, a significant number of theranostic (therapeutic and diagnostic) materials are produced through the conjugation of thiol-containing ingredients with gold and silver nanoparticles (Au and Ag NPs). Hence, it is essential to investigate Au/Ag-S interfaces precisely and determine the exact bonding states in the active nanobiomaterials. This study intends to provide useful insights into the interactions between Au/Ag NPs and thiol groups that exist in the structure of biomaterials. In this regard, the modeling of Au/Ag-S bonding in active biological ingredients is precisely reviewed. Then, the physiological stability of Au/Ag-based plasmonic nanobioconjugates in real physiological environments (pharmacokinetics) is discussed. Recent experimental validation and achievements of plasmonic theranostics and radiolabelled nanomaterials based on Au/Ag-S conjugation are also profoundly reviewed. This study will also help researchers working on biosensors in which plasmonic devices deal with the thiol-containing biomaterials (e.g., antibodies) inside blood serum and living cells.

Nonenzymatic Glucose Sensor Using Bimetallic Catalysts

Bimetallic glucose oxidation electrocatalysts were synthesized by two electrochemical reduction reactions carried out in series onto a titanium electrode. Nickel was deposited in the first synthesis stage followed by either silver or copper in the second stage to form Ag@Ni and Cu@Ni bimetallic structures. The chemical composition, crystal structure, and morphology of the resulting metal coating of the titanium electrode were investigated by X-ray diffraction, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and electron microscopy. The electrocatalytic performance of the coated titanium electrodes toward glucose oxidation was probed using cyclic voltammetry and amperometry. It was found that the unique high surface area bimetallic structures have superior electrocatalytic activity compared to nickel alone. The resulting catalyst-coated titanium electrode served as a nonenzymatic glucose sensor with high sensitivity and low limit of detection for glucose. The Cu@Ni catalyst enables accurate measurement of glucose over the concentration range of 0.2-12 mM, which includes the full normal human blood glucose range, with the maximum level extending high enough to encompass warning levels for prediabetic and diabetic conditions. The sensors were also found to perform well in the presence of several chemical compounds found in human blood known to interfere with nonenzymatic sensors.

DNAzyme-Mediated Biodeposition Coupling Adjustable Cascade Electric Fields for Photoelectrochemical Telomerase Activity Monitoring

Telomerase, as a specialized reverse transcriptase, plays a vital role in early cancer diagnostics and prognosis; thus, developing efficient sensing technologies is of vital importance. Herein, an innovative "signal-on-off" photoelectrochemical (PEC) sensing platform was developed for ultrasensitive evaluation of telomerase activity based on an electron-transfer tunneling distance regulation strategy and DNAzyme-triggerable biocatalytic precipitation. Concretely, cascade internal electric fields between CuInS2 quantum dots (QDs), graphitic carbon nitride nanosheets (g-C3N4 NSs), and TiO2 nanorod arrays (NRAs) were developed to realize cascade electron extraction and hole transfer. Enabled by such a design, an effective "signal-on" state to gain a progressively enhanced PEC output was designed by suppressing the photogenerated electron-hole pair recombination. With the introduction of hairpin probe H2 and the subsequent extension of the primer sequence driven by the target telomerase, the CuInS2 QDs labeled with hairpin probe H1 were programmatically unfolded, resulting in CuInS2 QDs' close proximity to the working electrode away from the cascade interface, accompanied by the formation of G-quadruplex/hemin complexes. The gradual undermining of tunneling distance and implantation of DNAzyme-initiating biocatalytic precipitation tremendously induced the sluggish migration kinetics of the photoinduced charge, accompanied by the photocurrent intensity decrement, leading to the "signal-off" state. Under optimized conditions, the as-prepared PEC biosensor realizes ultrasensitive detection of telomerase activity from 10 to 105 cell·mL-1 with a detection limitation of 3 cells·mL-1. As a proof of concept, this well-designed method provides new insights into signal amplification for telomerase activity evaluation and also presents promising potential for further development in drug screening, healthcare diagnostics, and biological assays.

Oncogene-targeting nanoprobes for early imaging detection of tumor

Malignant tumors have been one of the major reasons for deaths worldwide. Timely and accurate diagnosis as well as effective intervention of tumors play an essential role in the survival of patients. Genomic instability is the important foundation and feature of cancer, hence, in vivo oncogene imaging based on novel probes provides a valuable tool for the diagnosis of cancer at early-stage. However, the in vivo oncogene imaging is confronted with great challenge, due to the extremely low copies of oncogene in tumor cells. By combining with various novel activatable probes, the molecular imaging technologies provide a feasible approach to visualize oncogene in situ, and realize accurate treatment of tumor. This review aims to declare the design of nanoprobes responded to tumor associated DNA or RNA, and summarize their applications in detection and bioimaging for tumors. The significant challenges and prospective of oncogene-targeting nanoprobes towards tumors diagnosis are revealed as well.

Resultant inward imbalanced seeding force (RIISF)-induced concave gold nanostar (CAuNS) for non-enzymatic electrocatalytic detection of serotonin and Kynurenine in human serum

CTAC-based gold nanoseed-induced concave curvature evolution of surface boundary planes from concave gold nanocube (CAuNC) to concave gold nanostar (CAuNS) has been achieved by a novel synthetic methodology simply by controlling the extent of seed used and hence the generated 'Resultant Inward Imbalanced Seeding Force (RIISF)'. The resultant CAuNS shows an excellent enhancement in catalytic activity compared to CAuNC and other intermediates as a function of curvature-induced anisotropy. Detailed characterization evaluates the presence of an enhanced number of multiple defect sites, high energy facets, larger surface area, and roughened surface which ultimately results in an increased mechanical strain, coordinately unsaturation, and multifacet-oriented anisotropic behavior suitable for positive influence on the binding affinity of CAuNSs. While different crystalline and structural parameters improve their catalytic activity, the resultant uniform three-dimensional (3D) platform shows comparatively easy pliability and well absorptivity on the glassy carbon electrode surface for increased shelf life, a uniform structure to confine a large extent of stoichiometric systems, and long-term stability under ambient conditions for making this newly developed material a unique nonenzymatic scalable universal electrocatalytic platform. With the help of various electrochemical measurements, the ability of the platform has been established by performing highly specific and sensitive detection of the two most important human bio messengers: Serotonin (STN) and Kynurenine (KYN) which are metabolites of L-Tryptophan in the human body system. The present study mechanistically surveys the role of seed-induced RIISF-modulated anisotropy in controlling the catalytic activity which offers a universal 3D electrocatalytic sensing tenet by an electrocatalytic approach.

Facile synthesis of Pt/polyoxometalate/hollow carbon sphere tri-component nanoparticles via a "double gain strategy" for high-performance electrochemical sensing of adrenaline

In this study, we designed and successfully synthesized the Pt/polyoxometalate/hollow carbon sphere (Pt/POM/HCS) tri-component nanoparticles (NPs) by a pollution-free, efficient, and convenient method. HCSs with outstanding chemical stability and conductivity are self-generated by acid etching and calcination of silica spheres synthesized by a hard template method. HCSs have a hollow internal structure that provides specific three-dimensional storage space, and can increase the surface area. The mesoporous system is beneficial to providing numerous mass transfer passageways and immobilizing NPs. In addition, we introduced a "double gain strategy", by taking advantage of POMs as reducing and bridging agents, to achieve the loading of ultrafine Pt NPs on the surface of HCSs. Pt NPs have excellent stability and unique electrocatalytic activity. As a result of the synergistic effect of HCSs and ultrafine Pt NPs, the electrochemical sensing of adrenaline exhibits high-performance catalytic activity, sensitivity, suitable linearity range (0.16 μM-1.195 mM), and low limit of detection (57.5 nM, S/N = 3), excellent stability, and reproducibility. The developed platform is a sensitive and effective adrenaline electrical sensing platform with broad practical application prospects.

Surface-tethered electrochemical biosensor for telomerase detection by integration of homogeneous extension and hybridization reactions

The general electrochemical biosensors for telomerase detection require the immobilization of primers on the electrode surface for telomeric extension and hybridization reactions. However, immobilization of primers may suffer from the challenges of hindrance effect and configuration freedom, thus reducing the extension and hybridization efficiency. Herein, we developed a sensitive electrochemical biosensor for telomerase detection by integration of homogeneous extension and hybridization reactions and surface-tethered detection. In the presence of telomerase, the biotinylated primer (bio-primer) was efficiently elongated with telomeric repeats of (TTAGGG)_n at the 3' end in solution. Then, the extension product (bio-DNA) was hybridized with the signal probe DNA modified on the surface of ferrocene (Fc)-capped gold nanoparticle (AuNP). The bio-DNA/DNA/Fc-AuNP hybrids were then tethered by streptavidin-modified electrodes through the specific avidin-biotin interactions, thus producing strong electrochemical signals from the oxidation of Fc tags. The biosensor was successfully used to determine telomerase in HeLa cells and monitor the inhibition efficiency of inhibitor. A wide linear range for the detection of telomerase extracted from HeLa cells was attained. This method has great potential in clinical diagnosis and anti-cancer drug development, and should be beneficial for the fabrication of novel biosensors by integration of homogeneous catalysis and hybridization reactions.

An electrochemical aptasensor for detection of prostate-specific antigen-based on carbon quantum dots-gold nanoparticles

In this work, an electrochemical aptasensor was described for the determination of prostate-specific antigen (PSA). Aptamer chains were decorated on the surface of a glassy carbon electrode (GCE) via carbon quantum dots/Au nanoparticles (Au/CQD). Structural analysis that was used to characterize the prepared materials shows that Au/CQD nanoparticles synthesized in a spherical shape with an average size of 70 nm. Furthermore, the combination of Au nanoparticles with CQD resulted in formation of crystalline the structure of the Au/CQD composite. To study the electrochemical performance of the prepared aptasensor, cyclic voltammetry, square wave voltammetry, and electrochemical impedance spectroscopy were used. The results show that the aptasensor has a good selectivity to PSA over other biomaterials with the time optimized about 30 min. K₄ [Fe(CN)₆ ] was used as an electrochemical probe with the limit of detection about 2 fg⋅mL^-1 . To avoid the hazardous nature of K₄ [Fe(CN)₆ ], a label-based aptasensor was prepared using methylene blue as an electrochemical signal producer. They provide the capability of electrochemical detection in buffer phosphate solution with high sensitivity.

Multilayer Heterogeneous Membrane Biosensor Based on Multiphysical Field Coupling for Human Serum Albumin Detection

A factor closely associated with renal disease status in clinical diagnosis is abnormal human serum albumin (HSA) concentration levels in human body fluids urine, serum, etc. The surface stress biosensor was developed as a new type of biosensor to detect protein molecule concentration and has a wide range of clinical applications. However, further sensitivity improvement is required to achieve higher detection performance. Herein, MXene/PDMS/Fe₃O₄/PDMS of the multilayer heterogeneous membrane biosensor (MHBios) based on the coupling of the magnetic field, electric field, and surface stress field was successfully developed to achieve high sensitivity HSA detection through magnetic sensitization. The modified antibody specifically binds to HSA at the AuNP layer, allowing the biosensor to convert the surface stress caused by PDMS film deformation into an electrical signal. When the biosensor was exposed to a uniform magnetic field, the conductive path of the conductive layer was reshaped further as the magnetic force amplified the deformation of the PDMS film, enhancing the conversion of biological signals to electrical signals. The results exhibited that the detection limit (LOD) of the MHBios was 78 ng/mL when HSA concentration was 0-50 μg/mL, which was markedly lower than the minimum diagnostic limit of microalbuminuria. Furthermore, the MHBios detected HSA in actual samples, confirming the potential for early disease screening.

Sensitive bioanalytical methods for telomerase activity detection: a cancer biomarker

Telomerase is an enzyme that protects the length of telomeres by adding guanine-rich repetitive sequences. In tumors, gametes, and stem cells, telomerase activity is exerted. Telomerase activity can be a cancer biomarker for therapeutic and diagnosis approaches. So, a number of studies concentrating on the discovery of telomerase activity were reported. Bioanalytical devices, in comparison with other tests, have numerous advantages including low expense, simplicity, and excellent sensitivity and specificity. In this article we reviewed recent studies on the subject of various bioanalytical methods based on different nanomaterials. Optical, electrochemical, and quartz crystal microbalance (QCM) are prominent analytical techniques that are mentioned in this paper.

Simultaneous detection of circulating tumor DNAs using a SERS-based lateral flow assay biosensor for point-of-care diagnostics of head and neck cancer

Circulating tumor DNA (ctDNA) has recently emerged as an ideal target for biomarker analytes. Thus, the development of rapid and ultrasensitive ctDNA detection methods is essential. In this study, a high-throughput surface-enhanced Raman scattering (SERS)-based lateral flow assay (LFA) strip is proposed. The aim of this method is to achieve accurate quantification of TP53 and PIK3CA E545K, two types of ctDNAs associated with head and neck squamous cell carcinoma (HNSCC), particularly for point-of-care testing (POCT). Raman reporters and hairpin DNAs are used to functionalize the Pd-Au core-shell nanorods (Pd-AuNRs), which serve as the SERS probes. During the detection process, the existence of targets could open the hairpins on the surface of Pd-AuNRs and trigger the first step of catalytic hairpin assembly (CHA) amplification. The next stage of CHA amplification is initiated by the hairpins prefixed on the test lines, generating numerous "hot spots" to enhance the SERS signal significantly. By the combination of high-performing SERS probes and a target-specific signal amplification strategy, TP53 and PIK3CA E545K are directly quantified in the range of 100 aM-1 nM, with the respective limits of detection (LOD) calculated as 33.1 aM and 20.0 aM in the PBS buffer and 37.8 aM and 23.1 aM in human serum, which are significantly lower than for traditional colorimetric LFA methods. The entire detection process is completed within 45 min, and the multichannel design realizes the parallel detection of multiple groups of samples. Moreover, the analytical performance is validated, including reproducibility, uniformity, and specificity. Finally, the SERS-LFA biosensor is employed to analyze the expression levels of TP53 and PIK3CA E545K in the serum of patients with HNSCC. The results are verified as consistent with those of qRT-PCR. Thus, the SERS-LFA biosensor can be considered as a noninvasive liquid biopsy assay for clinical cancer diagnosis.

Facile one-pot method of AuNPs/PEDOT/CNT composites for simultaneous detection of dopamine with a high concentration of ascorbic acid and uric acid

In this research, a facile one-pot method was used to synthesize gold/poly-3,4-ethylene-dioxythiophene/carbon nanotube (AuNPs/PEDOT/CNTs) composite material. The composite material was investigated by Fourier Transform Infrared spectroscopy (FTIR), X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). Then the synthesized nanocomposite material was dropped on a bare glassy carbon electrode (GCE) to improve the detection performance of dopamine with a high concentration of ascorbic acid and uric acid. The electrochemical behavior of AuNPs/PEDOT/CNTs/GCE was studied by Cyclic Voltammetry (CV), Differential Pulse Voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Under optimum conditions, AuNPs/PEDOT/CNTs/GCE showed a good linear response in the concentration range from 9.14 to 29.704 μM with a detection limit (LOD) and sensitivity of 0.283 μM and 1.557 μA μM-1, respectively. This sensor was applied to detect practical samples with good average recovery. It also exhibited good reproducibility and stability.

One-dimensional bimetallic PdRh alloy mesoporous nanotubes constructed for ultra-sensitive detection of carbamate pesticide

Bimetallic nanomaterials with various dimensions have been successfully explored in electrochemical biosensor to detect the carbamate pesticide. One-dimensional bimetallic nanomaterials with mesoporous, which possess bigger electrochemical active area, more catalytic active sites and faster electron transmission efficiency, may have excellent performance in electrochemical biosensor, but have been rarely reported. In order to confirm this hypothesis, one-dimensional PdRh alloy mesoporous nanotubes were prepared and applied as a platform for carbamate pesticide electrochemical detection. Upon optimum conditions, the constructed AChE sensor showed an ultrahigh sensitivity (0.279 μA/nM), a wide linear range (9.44 × 10^-8 - 0.944 mg/L) and a low detection limit (9.44 × 10^-8 mg/L) for carbaryl. And the biosensor exhibited outstanding anti-interference ability, precision and stability. Moreover, the actual sample detection of the biosensor has been demonstrated with a satisfactory recovery (94.01%-102.80%). The remarkable property may attribute to the integrated advantages of one-dimensional mesoporous structure and bimetallic alloy.

Dual biomineralized metal-organic frameworks-mediated conversion of chemical energy to electricity enabling portable PEC sensing of telomerase activity in bladder cancer tissues

In this work, we report on a portable photoelectrochemical (PEC) sensing system for telomerase activity detection based on dual biomineralized ZIF-8 nanoparticles (NPs)-medicated conversion of chemical energy to electricity and terminal deoxynucleoside transferase (TdTase)-catalyzed elongation of Y-junction DNA structure. Two kinds of biomineralized ZIF-8 NPs including glucose oxidase (GOx)-encapsulated ZIF-8 (GZIF) and horseradish peroxidase (HRP)-encapsulated ZIF-8 (HZIF) are involved in this assay system. The recognition of telomerase is started with telomerase-catalyzed elongation of a telomerase substrate (TS) primer, which generates a longer elongation chain to trigger the formation of a Y-junction DNA structure. The Y-junction DNA with abundant 3'-OH terminal and small steric hindrance facilitates the implement of TdTase-catalyzed elongation reaction, in which the branches of Y-junction DNA are elongated and endowed with biotin moiety to capture streptavidin-modified GZIF (SA-GZIF). The signal transduction is then achieved on a luminol/HZIF/CdS-based photoelectrode. Once the H₂O₂ produced from GZIF-catalyzed hydrolysis of glucose is introduced to the photoelectrode, chemiluminescence of HRP-luminol-H₂O₂-p-iodo-phenol (PIP) system confined in HZIF is activated to excite photocurrent of CdS NPs, which is then recorded by a portable digital multimeter (DMM). The developed PEC sensing system possesses a wide calibration range from 50 to 5000 HeLa cells and a low detection limit of 46 cells. Significantly, the sensing platform is successfully applied to evaluate the telomerase activity in resected bladder tumor tissues. This work not only provides a diagnostic tool for telomerase-related diseases but also open a new avenue for establishing PEC assay methods using metal-organic framework (MOF) NPs.

Ultrasensitive fluorescent detection of telomerase activity based on tetrahedral DNA nanostructures as carriers for DNA-templated silver nanoclusters

Precise evaluation of telomerase activity is essential for the clinical diagnosis of early tumors. Herein, we have ingeniously designed a tetrahedral DNA nanostructure, with hairpin-shaped DNA probes rich in cytosine bases at four vertices for telomerase detection. The DNA-templated silver nanoclusters can be formed after the addition of Ag. Then the introduction of telomerase adds the single-strand TTAGGG extension, which can "turn on" the fluorescence of silver nanoclusters quickly by the proximity of the resulting guanine-rich sequences to silver nanoclusters and realize accurate detection of telomerase activity. In this study, integration of high stability tetrahedral DNA nanostructure and fluorescence signal amplification of four DNA-templated silver nanoclusters offers the advantage of high sensitivity, with a low detection limit of 1 cell. More than that, this method is low-cost, facile, and feasible for practical clinical applications.

Ferrocene-reduced graphene oxide-polyoxometalates based ternary nanocomposites as electrochemical detection for acetaminophen

Developing a convenient and accurate method for the determination of acetaminophen (APAP) content is very vital, and ferrocene (Fc) based nanocomposites coupled with polyoxometalates (POMs) as electrochemical sensor is a promising approach to address the issues. Herein, a new ternary nanocomposite of Fc based carbon nanomaterials (Fc-rGO) with PMo₁₂ (Fc-rGO/PMo₁₂, rGFP-n) was successfully fabricated, and the electrochemical activities and APAP detection of rGFP-n as electro-active materials were systematically investigated, and results of the differential pulse voltammetry (DPV) and electro-active surface area (0.0332 cm²) show that rGFP-1 is an excellent electrochemical sensor for APAP, and the proportion of Fc in rGFP-n can affect the charge transfer between APAP and rGFP. Under the optimal experimental conditions, rGFP-1 can be used to detect APAP with the limit of detection (LOD) of 13.27 nM (S/N = 3), the sensitivity of 36.81μA⋅μM^-1cm^-2, and the detection range from 1×10^-6 to 1×10^-3M, meeting the lowest plasma concentration of APAP (1.3 mM).

Telomerase detection using a DNA-PAINT strategy

Telomerase plays an important role in maintaining the length of telomere during cell division and is recognized as a new kind of biomarkers for cancer diagnosis. In this work, we present a brand new telomerase detection strategy based on a DNA points accumulation for imaging in nanoscale topography (DNA-PAINT) like strategy. With an extraordinary spatial resolution (∼10 nm), the DNA-PAINT based strategy offers several advantages. First, it avoids complicated polymerase chain reaction and electrophoresis procedures. Second, it enables super resolution imaging of the reaction products with a high signal-to-noise ratio and facilitates the location of telomeric elongation sites on the single particle level, which results in a high sensitivity. Third, the detection scheme of the DNA-PAINT strategy allows directin situvisualization of the telomeric elongation process, which has never been achieved before. All these advantages make the DNA-PAINT telomerase detection strategy significant for dynamic investigation of telomerase related physiological processes as well as cancer diagnosis.

Sensitive osteosarcoma diagnosis through five-base telomerase product-triggered CRISPR-Cas12a enhanced rolling circle amplification

Osteosarcoma is the most frequent primary malignant bone tumor, composed of mesenchymal cells producing osteoid and immature bone. The sensitive detection of telomerase plays a pivotal role in the early diagnosis and therapeutic treatment of osteosarcoma. We report here an in vitro strategy for sensitive telomerase activity detection through the integration of rolling circle amplification (RCA) and a clustered regularly spaced short palindrome repeats (CRISPR)-Cas12a system. In the proposed strategy, telomerase substrate (TS) primers are easily controlled to extend five bases (GGGTT) to give short telomerase extension products (TEP) with definite lengths without adding dATP. The resulting short TEPs can then cyclize the padlock through hybridizing with its two terminals and thus initiate the following RCA. To obtain an improved sensitivity, the CRISPR-Cas12a system is attached to collaterally cut surrounding DNA reporter probes after recognizing the target single strand DNA sequence in the RCA products. The highlights of this strategy are as follows: (i) the short TEP triggered strategy is excellent at detecting low telomerase activity and thus contributes to the early diagnosis of malignant tumors; (ii) highly sensitive telomerase activity detection which is easy to operate from RCA initiated CRISPR-Cas12a; (iii) opening up of a new avenue for telomerase activity detection with a CRISPR-Cas12a system. Finally, the proposed strategy exhibited sensitive telomerase activity detection under optimized experimental parameters and has great application potential for the clinical diagnosis of malignant tumors and the development of anti-cancer drugs.

Three-dimensional hierarchical porous carbon coupled with chitosan based electrochemical sensor for sensitive determination of niclosamide

Herein, a simple, low-cost, environment-friendly strategy was proposed to prepare the composite of three-dimensional hierarchical porous carbon and chitosan, which was applied to modify the glass carbon electrode to fabricate an electrochemical sensor for the determination of niclosamide. The three-dimensional porous carbon with interconnected conductive network, high surface area, and self-generated oxygen-containing functional groups was prepared by salt-templating method with glucose as carbon source and eutectic mixture of LiBr/KBr as both activating and pore-forming agent. During the subsequent ultrasonic process, chitosan with excellent filming property, strong adsorption ability, and good dispersibility was successfully decorated on the obtained porous carbon to further enhance the determination performance of niclosamide. Benefitting from the multi-functional integration of three-dimensional hierarchical porous carbon and chitosan, the fabricated sensor presented a low limit of detection (6.7 nM) in the linear concentration range from 0.01 to 10 µM. Moreover, the fabricated sensor could show good repeatability, reproducibility, stability, and selectivity. Most important, the decent practicability for the detection of niclosamide was obtained in different food samples with low relative standard deviation and satisfactory recoveries. This work provides a very valuable reference for the sensitive determination of niclosamide in food samples.

A novel tool for the adsorption of dsDNA: Electrochemical reduction of Pd nanoparticles onto reduced-keratin particles extracted from wool wastes

This work outlines the fabrication of a novel electrochemical platform for the dsDNA adsorption, using one of the most sustainable materials, wool fabric waste, and Pd²⁺ ions. To develop a functional material with a significant adsorption capability, the waste wool was subjected to the chemical reduction process, and the keratin-SH (KerSH) particles were extracted in powder form. These particles were used in the adsorption of Pd²⁺ ions by monitoring with the UV-vis spectra. The dispersion of the KerSH-Pd²⁺ particles was subsequently drop-casted onto a glassy carbon electrode (GCE) and electrochemically reduced to the GCE/KerSH-PdNPs composite by chronoamperometry at -0.4 V for 500 s. It was found that the KerSH particles were self-assembled by revealing chemically attractive NH₂ groups after the electrochemical PdNPs deposition. A GCE/KerSH-PdNPs composite was then employed in the electrochemical dsDNA detection by Differential Pulse Voltammetry (DPV), using the oxidation signals of guanine and adenine bases at 0.8 V and 1.2 V, respectively. Accordingly, relatively stable, repeatable, and reproducible dsDNA adsorption was ensured through the positively charged-NH₂ groups of KerSH-PdNPs. This finding reveals the potential of textile waste for various electrochemical applications, such as DNA biosensors for environmental, pharmaceutical, and medicinal fields.

Epoxy-functionalized macroporous carbon with embedded platinum nanoparticles for electrochemical detection of telomerase activity via telomerase-triggered catalytic hairpin assembly

Telomerase is regarded as a crucial biomarker for the early diagnosis of malignant tumors and a valuable therapeutic target. In this work, a telomerase-triggered amplification strategy was designed on the basis of a catalyzed hairpin assembly (CHA) for bridging a signal probe of platinum nanoparticles (Pt NPs) anchored on three-dimensional (3D) epoxy-functionalized macroporous carbon (Pt/MPC-COOH) in an ultrasensitive electrochemical biosensor. Pt/MPC-COOH nanomaterials with interconnected macroporous structure not only immobilized hairpin DNA probe 2 (H2) via an amide reaction (Pt/MPC-COOH-H2), but they also generated an obvious electrochemical signal in response to acetaminophen (AP) oxidation. After the introduction of telomerase, telomerase primer (TP) was extended to a telomerase extension product (TEP) with several hexamer repeats (TTAGGG)n to initiate the CHA cycle, leading to signal amplification. Subsequently, with the TEP-triggered CHA cycle amplification strategy, a large amount of Pt/MPC-COOH-H2 was introduced on the electrode surface for the construction of the electrochemical platform, which realized the sensitive detection of telomerase activity from 10² to10⁷ cells mL^-1 with a limit of detection (LOD) of 9.02 cells mL^-1. This strategy provides a sensitive method for the detection of biomolecules that could be useful for bioanalysis and early clinical diagnoses of diseases.

An all-in-one telomerase assay based on CRISPR-Cas12a trans-cleavage while telomere synthesis

As one of the crucial factors associated with human life span and cancer progression, telomerase is regarded as an emerging biomarker for cancer diagnosis. Therefore, a facile, rapid and sensitive approach for telomerase activity detection with point-of-care (POC) diagnosis potential is in great demands. Herein, an all-in-one telomerase activity detection assay was established based on the telomere synthesis activated CRISPR-Cas12a system. A telomerase extension reaction generated telomere repeats sequences (TTAGGG)_n, which was recognized by a customized CRISPR-guided RNA (crRNA) simultaneously, and finally activated a typical trans-cleavage based CRISPR-Cas12a detection assay. With the inherent sensitivity of CRISPR-Cas12a, this approach achieved a great linear regression ranging from 100 to 2000 HeLa cells and a limitation of detection down to 26 HeLa cells. Moreover, by using the proposed method, telomerase can be detected in one pot under isothermal condition (37 °C) by a simple and fast workflow (one step within 1 h). Due to its excellent performance, this all-in-one method shows great potential in POC detection of the telomerase activity.

A stepwise recognition strategy for the detection of telomerase activity via direct electrochemical analysis of metal-organic frameworks

The detection of telomerase is of great significance for monitoring cell canceration. The conventional methods depend on the extension of telomerase towards its primer to conduct signal transduction. Herein, a specific and reliable detection strategy based on stepwise recognition was developed for tandem detection of metal ions and enzymes. We first synthesized an electrically active metal-organic framework (MIL-101(Fe)), which can act directly as a signal reporter in phosphate buffered saline after being modified with capture DNA (cDNA). When the zinc ion is added as a coenzyme factor, the modified hairpin DNA on the electrode is cleaved by DNAzyme to yield the activated primer. After the addition of telomerase, the cleaved DNA strand would be extended, and the resulting sequence will be hybridized with the signal label of MIL-101(Fe)-cDNA. Therefore, a signal-on strategy for the detection of telomerase was achieved based on the direct electrochemical analysis of MIL-101(Fe). Moreover, this electrochemical biosensor can discriminate telomerase activity among different cell lines. The stepwise recognition ensured the advantages of an electrochemical biosensor such as high sensitivity and specificity during the detection process, providing a novel method for monitoring and diagnosis of diseases.

An ultrasensitive and point-of-care sensor for the telomerase activity detection

Telomerase owns great application potential in diagnosis, therapy, prognosis, and drug screening of cancers. Thus, the ultrasensitive and point-of-care detection of telomerase activity meets the clinical demands extremely. Here, a sensor based on telomerase extends activators to unlock the ssDNase activity of CRISPR/Cas12a was created for the first time to detect the telomerase activity. Based on the fluorescence or CRISPR/Cas12a-based lateral flow assay, we achieve the ultrasensitive and point-of-care detection of telomerase activity in MCF-7 cells low to 57 cells·mL^-1 and 5.7 × 10² cells·mL^-1 in about 1 h, respectively. Besides, the detection of telomerase activity in different subtype breast cancer cells indicates that the proposed sensor possesses potential in the classification of breast cancer cell subtypes.

Biosensors for the detection of respiratory viruses: A review

The recent events of outbreaks related to different respiratory viruses in the past few years, exponentiated by the pandemic caused by the coronavirus disease 2019 (COVID-19), reported worldwide caused by SARS-CoV-2, raised a concern and increased the search for more information on viruses-based diseases. The detection of the virus with high specificity and sensitivity plays an important role for an accurate diagnosis. Despite the many efforts to identify the SARS-CoV-2, the diagnosis still relays on expensive and time-consuming analysis. A fast and reliable alternative is the use of low-cost biosensor for in loco detection. This review gathers important contributions in the biosensor area regarding the most current respiratory viruses, presents the advances in the assembly of the devices and figures of merit. All information is useful for further biosensor development for the detection of respiratory viruses, such as for the new coronavirus.

Facile synthesis of Vulcan XC-72 nanoparticles-decorated halloysite nanotubes for the highly sensitive electrochemical determination of niclosamide

We report a scalable and controllable ultrasound-assisted strategy for the preparation of Vulcan XC-72 nanoparticles-decorated halloysite nanotubes (HNTs@VXC-72), which was applied to modify glassy carbon electrode (GCE) for the highly sensitive electrochemical determination of niclosamide (NA). For the HNTs@VXC-72 nanocomposite, VXC-72 nanoparticles with excellent electrical conductivity and good dispersing property contributed to the formation of the interconnected conductive network; HNTs possessed good adsorption performance and promoted the electrochemical redox reaction. The research results showed that the combination of VXC-72 nanoparticles and HNTs produced the effect of synergistic enhancement. The HNTs@VXC-72/GCE sensor could show a relatively low detection limit of 3.28 nM in the great linear NA concentration range of 0.01-1 µM. When used for the NA determination in food samples, the HNTs@VXC-72/GCE sensor exhibited good practical feasibility with low RSD and acceptable recoveries, which provided a promising NA determination approach to ensure food safety.

Facile preparation of Ni nanoparticle embedded on mesoporous carbon nanorods for non-enzymatic glucose detection

Transition metal doped carbon materials are recognized as promising sensing platforms for glucose detection. Herein, a simple strategy involving crystallinity, nanostructure engineering, and pyrolysis was developed for constructing well-defined Ni nanoparticle embedded on nanoporous carbon nanorods (Ni/NCNs). A three-dimensional nickel-based metal-organic framework (Ni-MOF) was used as both a self-sacrificing template and precursor. Due to the synergistic effects between the uniformly dispersed Ni nanoparticles and the nanoporous carbon matrix, the as-prepared Ni/NCNs exhibited remarkable electrochemical activity. The fabricated Ni/NCNs glucose sensor showed excellent electrocatalytic performance with ultra-low limit of detection, wide linear detection ranges, fast response times (within 1.6 s), superior stability, and anti-interference characteristics. Moreover, the Ni/NCNs sensing platform was successfully applied to analyze glucose concentrations in human blood samples. These results showed that Ni/NCNs hold potential applications in developing enzyme-free glucose sensors.

An enzyme-free electrochemical biosensor based on target-catalytic hairpin assembly and Pd@UiO-66 for the ultrasensitive detection of microRNA-21

MicroRNA-21 (miR-21) has been widely investigated as important biomarkers for cancer diagnosis and treatment. Herein, a highly sensitive nonenzymatic electrochemical biosensor based on Pd@metal-organic frameworks (Pd@UiO-66) and target-catalytic hairpin assembly (CHA) with target recycling approach has been proposed for the detection of miR-21. The proposed biosensor integrates the efficient CHA strategy and excellent electrocatalytic performance of Pd@UiO-66 nanocomposites. The concentration of miRNA-21 is related to the amount of the adsorbed electrocatalyst, leading to the different electrochemical signals for readout towards paracetamol (AP). This biosensor shows a low limit of detection of 0.713 fM with the dynamic range of 20 fM -600 pM under the optimal experimental conditions, providing a powerful platform for detecting miR-21. Furthermore, the designed biochemical self-assembly strategy of this electrochemical biosensor is promising candidate for potential applications in the analysis of other important genetic biomarkers for early diagnosis of cancers.

A novel cobalt and nitrogen co-doped mesoporous hollow carbon hemisphere as high-efficient electrocatalysts for oxygen reduction reaction

Exploring a cheap catalyst with effective activity for oxygen reduction reaction (ORR) to replace precious metal electrocatalysts has gained tremendous attention for several decades. In this study, we designed and synthesized cobalt and nitrogen supported on mesoporous hollow carbon hemisphere (Co/N/HCHs) nanocomposites by a facile and economical approach. Semisphere-shaped mesoporous hollow carbon is self-generated using silica particles as template, followed by a pyrolysis-etching process; and exhibits high electrical conductivity and high specific surface. The unique porous structure of carbon provides significant number of the abundant defective sites and shortens the mass transfer pathway, leading to a greatly enhanced electrocatalytic activity with mainly 4e^- reduction. Moreover, the synergistic effects of large electrochemically active areas and good electrical conductivity, resulting from the introduction of Co and N heteroatom, are the main reason for displaying outstanding ORR activity with a high half-wave potential of 0.8 V and the electron transfer numbers of 3.89. Furthermore, an excellent long-term stability (the current density retention of 87.0%) and superb methanol tolerance in alkaline medium are achieved. Undoubtedly, this demonstrates a potential way to strategically design the non-precious metal doped carbon catalysts for wider practical applications.

Construction of an ultrasensitive electrochemical sensing platform for microRNA-21 based on interface impedance spectroscopy

A hybridization chain reaction (HCR) amplification-based electrochemical impedimetric biosensor is fabricated for the quick, sensitive, and specific detection of miRNA-21 (miR-21) via monitoring of electrode interfacial property changes in real-time. Two sequences of H1 and H2 are adopted to trigger HCR amplification. A large amount of linear DNA concatemer are formed which could change the interfacial properties of the electrode. Interfacial charge transfer resistance difference (R_ct) is probed via electrochemical impedance spectroscopy (EIS) and Randles equivalent circuit. After amplifying via HCR, oligonucleotides with negatively charged repelling [Fe(CN)₆]^3-/4- ions can form a spatial blockage. HCR amplification strategy markedly enhanced the electrochemical signal with a limit of detection (LOD) down to 4.63 fM (S/N = 3). This strategy exhibited excellent selectivity for three different miRNAs: miR-199a, miR-141, and miR-155. Moreover, results show that the proposed method can be applied to miR-21 detection in the total RNA extracted from five cells. This work presents an enzyme-free and label-free EIS nucleic acid sensor for sensitively and selectively detecting miR-21, offering a promising approach in early diseases diagnosis.