Hybridization chain reaction (HCR) for amplifying nanopore signals

Colorimetric detection of circulating tumor cells in breast cancer based on ladder-branch hybridization chain reaction and DFs/AuNCs nanozyme

Breast cancer is the most common malignant tumor in women, which accounts for 6.9% of all cancer-related deaths. Early diagnosis is crucial for making the best clinical decision and improving the prognosis of patients. Circulating tumor cells (CTCs) have been regarded as significant tumor biomarkers. Herein, we designed a colorimetric biosensor for breast cancer CTCs quantification based on ladder-branch hybridization chain reaction (HCR) and DNA flowers/gold nanoclusters (DFs/AuNCs) nanozyme. With the assistance of complementary DNA labeled on magnetic beads (MBs), the cleavage products of RNA-cleaving DNAzymes (RCDs) could be rapidly captured, subsequently triggering ladder-branch HCR. In addition, the DFs/AuNCs nanozyme was applied for colorimetric analysis, which further improved the sensitivity for the detection of target CTCs. Benefiting from specific RCDs, ladder-branch HCR and DFs/AuNCs, we achieved a superior detection limit of 3 cells/mL as well as a broad linear range of 10 cells/mL to 104 cells/mL. Conclusively, this colorimetric biosensor achieved sensitively and selectively detection of breast cancer CTCs without the participation of enzymes at room temperature, which might provide new insight into the early detection of breast cancer.

Classification and applications of nanomaterials in vitro diagnosis

With the rapid development of clinical diagnosis and treatment, many traditional and conventional in vitro diagnosis technologies are unable to meet the demands of clinical medicine development. In this situation, nanomaterials are rapidly developing and widely used in the field of in vitro diagnosis. Nanomaterials have distinct size-dependent physical or chemical properties, and their optical, magnetic, electrical, thermal, and biological properties can be modulated at the nanoscale by changing their size, shape, chemical composition, and surface functional groups, particularly because they have a larger specific surface area than macromaterials. They provide an amount of space to modify different molecules on their surface, allowing them to detect small substances, nucleic acids, proteins, and microorganisms. Combining nanomaterials with in vitro diagnosis is expected to result in lower detection limits, higher sensitivity, and stronger selectivity. In this review, we will discuss the classfication and properties of some common nanomaterials, as well as their applications in protein, nucleic acids, and other aspect detection and analysis for in vitro diagnosis, especially on aging-related nanodiagnostics. Finally, it is summarized with guidelines for in vitro diagnosis.

Label-free and highly sensitive detection of microRNA from cancer cells via target-induced cascade amplification generation of lighting-up RNA aptamers

The abnormal expression levels of miRNAs have been proven to be highly related to the generation of various diseases and are also closely associated with the stages and types of disease development. The novel RNA aptamers-based homogenous fluorescent methods were simple, with low background signal and high signal-to-noise ratio, but lacked effective signal amplification technology to achieve sensitive detection of trace miRNA markers. There is an urgent need for combining effective nucleic acid amplification technology with RNA aptamer to achieve highly sensitive and accurate detection of miRNA. For this purpose, a new DNA multi-arm nanostructure-based dual rolling circle transcription machinery for the generation of lighting-up MG RNA aptamers is constructed for label-free and highly sensitive sensing of miRNA-21. In this system, the target miRNA-21 induces a structural transformation of the DNA multi-arm nanostructure probe to recycle miRNA-21 and trigger two independent rolling circle transcription reactions to generate two long RNAs, which can partially hybridize with each other to generate large amounts of complete MG RNA aptamers. These RNA aptamers can associate with organic MG dye to produce significantly enhanced fluorescence signals to accomplish ultrasensitive miRNA-21 detection down to 0.9 fM. In addition, this method exhibits high selectivity to distinguish miRNA-21 even with single nucleotide mismatch, and also has potential application capability to monitor different expression levels of miRNA-21 from different cancer cells. The effective collaboration between MG RNA aptamer and rolling circle transcription reaction makes this fluorescent method show the significant advantages of low background signal, high signal-to-noise ratio and high detection sensitivity. It has great potential to be a promising means to achieve label-free and highly sensitive monitoring of other trace biological markers via a simple change of target sequence.

Solid-State Nanopore Sensors with Enhanced Sensitivity through Nucleic Acid Amplification

Solid-state nanopores have wide applications in DNA sequencing, energy conversion and storage, seawater desalination, sensors, and reactors due to their high stability, controllable geometry, and a variety of pore-forming materials. Solid-state nanopore sensors can be used for qualitative and quantitative analyses of ions, small molecules, proteins, and nucleic acids. The combination of nucleic acid amplification and solid-state nanopores to achieve trace detection of analytes is gradually attracting attention. This review outlines nucleic acid amplification strategies for enhancing the sensitivity of solid-state nanopore sensors by summarizing the articles published in the past 10 years. The future development prospects and challenges of nucleic acid amplification in solid-state nanopore sensors are discussed. This review helps readers better understand the field of solid-state nanopore sensors. We believe that solid-state nanopore sensors will break through the bottleneck of traditional detection and become a powerful single-molecule detection platform.

Solid-state nanochannels for bio-marker analysis

Bio-markers, such as ions, small molecules, nucleic acids, peptides, proteins and cells, participate in the construction of living organisms and play important roles in biological processes. It is of great significance to accurately detect these bio-markers for studying their basic functions, the development of molecular diagnosis and to better understand life processes. Solid-state nanochannel-based sensing systems have been demonstrated for the detection of bio-markers, due to their rapid, label-free and high-throughput screening, with high sensitivity and specificity. Generally, studies on solid-state nanochannels have focused on probes on the inner-wall (PIW), ignoring probes on the outer-surface (POS). As a result, the direct detection of cells is difficult to realize by these inner-wall focused nanochannels. Moreover, the sensitivity for detecting ions, small molecules, nucleic acids, peptides and proteins requires further improvement. Recent research has focused on artificial solid-state nanochannels with POS, which have demonstrated the ability to independently regulate ion transport. This design not only contributes to the in situ detection of large analytes, such as cells, but also provides promising opportunities for ultra-high sensitivity detection with a clear mechanism. In this tutorial review, we present an overview of the detection principle used for solid-state nanochannels, inner-wall focused nanochannels and outer-surface focused nanochannels. Furthermore, we discuss the remaining challenges faced by current nanochannel technologies and provide insights into their prospects.

An ingenious designed dual mode self-powered biosensing platform based on graphdiyne heterostructure substrate for instant hepatocarcinoma marker detection

We report here for the first time a self-powered biosensing platform based on graphene/graphdiyne/graphene (GDY-Gr) heterostructure substrate material for ultrasensitive hepatocarcinoma marker (microRNA-21) detection in both electrochemical and colorimetric test modes. The dual-mode signal intuitively displayed on a smartphone fundamentally improves the detection accuracy. In electrochemical mode, the calibration curve is established in the linear range of 0.1-10000 fM, and the detection limit is as low as 0.333 fM (S/N = 3). Simultaneously, colorimetric analysis of the miRNA-21 is realized by using ABTS as an indicator. The detection limit is confirmed as 32 fM (S/N = 3), and miRNA-21 of concentration from 0.1 pM to 1 nM exhibit a linear relationship with R2 = 0.9968. Overall, the combination of GDY-Gr and multiple signal amplification strategy significantly improved the sensitivity by 310 times compared with traditional enzymatic biofuel cells (EBFCs) based detection platform, showing broad application prospects for on-site analysis and future mobile medical services.

Single Molecular Nanopores as a Label-Free Method for Homogeneous Conformation Investigation and Anti-Interference Molecular Analysis

In this paper, we propose a "reciprocal strategy" that, on the one hand, explores the ability of solid-state nanopores in a homogeneous high-fidelity characterization of nucleic acid assembly and, on the other hand, the formed nucleic acid assembly with a large size serves as an amplifier to provide a highly distinguished and anti-interference signal for molecular sensing. Four-hairpin hybridization chain reaction (HCR) with G-rich tail tags is taken as the proof-of-concept demonstration. G-rich tail tags are commonly used to form G-quadruplex signal probes on the side chain of HCR duplex concatemers. When such G-tailed HCR concatemers translocate the nanopore, abnormal, much higher nanopore signals over normal duplexes can be observed. Combined with atomic force microscopy, we reveal the G-rich tail may easily induce the "intermolecular interaction" between HCR concatemers to form "branched assembly structure (BAS)". To the best of our knowledge, this is the first evidence for the formation BAS of the G tailed HCR concatemers in a homogeneous solution. Systematic nanopore measurements further suggest the formation of these BASs is closely related to the types of salt ions, the amount of G, the concentration of substrate hairpins, the reaction time, and so forth. Under optimized conditions, these BASs can be grown to just the right size without being too large to block the pores, while producing a current 14 times that of conventional double-stranded chains. Here, these very abnormal large current blockages have, in turn, been taken as an anti-interference signal indicator for small targets in order to defend the high noises resulting from co-existing big species (e.g., enzymes or other long double-stranded DNA).

Electrical Nanobiosensors for Nucleic Acid Based Diagnostics

Recent advances in nanotechnologies have promoted the iterative updating of nucleic acid sensors. Among various sensing technologies, the electrical nanobiosensor is regarded as one of the most promising prospects to achieve rapid, precise, and point-of-care nucleic acid based diagnostics. In this Perspective, we introduce recent progresses in electrical nanobiosensors for nucleic acid detection. First, the strategies for improving detection performance are summarized, including chemical amplification and electrical amplification. Then, the detection mechanism of electrical nanobiosensors, such as electrochemical biosensors, field-effect transistors, and photoelectric enhanced biosensors, is illustrated. At the same time, their applications in cancer screening, pathogen detection, gene sequencing, and genetic disease diagnosis are introduced. Finally, challenges and future prospects in clinical application are discussed.

Development of a hybridization chain reaction-powered lab-on-fiber device for ultrafast point-of-care testing of circulating tuor DNA in whole blood

Circulating tumor DNA (ctDNA) demonstrates great promise in the guidance of prognostication, diagnosis, and surveillance of cancers, which highlights the need for rapid and sensitive point-of-care testing (POCT) technologies. Hybridization chain reaction (HCR)-based optical biosensors provide excellent solutions due to their prominent features. However, the requirement of a sophisticated and expensive optical readout device, relatively long detection time, and heating hold back their scalability and clinical applications. Here, an innovative HCR-powered lab-on-fiber device (HCR-LOFD) was developed for rapid on-site detection of ctDNA with high sensitivity, specificity, and reproducibility. A LOFD with a compact all-fiber optical structure was constructed for the fluorescence detection of the HCR system. Combining HCR, fluorescence energy resonant transfer, and the evanescent wave fluorescence principle, HCR-LOFD achieved the quantitative detection of KRAS G12D, the 12th amino acid from glycine (Gly) mutated aspartate (Asp) and the most common mutation of KARS, in 5 min at room temperature based on end-point detection mode or real-time fluorescence detection mode. This new assay platform was also successfully applied for the direct detection of KRAS G12D in whole blood with simple dilution. The application of HCR-LOFD not only greatly simplifies the complexity of optical readout devices and improves their scalability but also potentially serves as a sample-to-answer solution for the detection of biomarkers in limited medical resource regions.

Nanopore single-molecule biosensor in protein denaturation analysis

Unclear issues in protein studies include but not limited to the stability and denaturation mechanism in the presence of denaturants. Herein, we report a dynamic monitoring approach based on nanopore single-molecule biosensor, which can detect the protein's folding and unfolding transitions by recording a nanopore ionic current. When gradually increasing the concentration of denaturant guanidine hydrochloride (GdmCl), sensitive responses were observed with lysozyme unfolding. The emergence of the featured biphasic-pulse demonstrated the existence of a stable intermediate. It was the first time to experimentally confirm the dynamic equilibrium between the intermediate and the native states at single molecule level, therefore consolidating the standpoint of lysozyme denaturation process following the three-state model. Additionally, we got more insights into the conformation about the intermediate as globular-like structure, larger gyration radius, and enhanced positive charge density. We considered that the manner of denaturant toward lysozyme adopts the "direct" model based on stronger electrostatic and van der Waals forces. Nanopore biosensor exhibited excellent sensitivity with a low detection concentration of 280 pM and reproducibility in analysing the folding intermediate of lysozyme.

Self-assembly of DNA-hyperbranched aggregates catalyzed by a dual-targets recognition probe for miRNAs SERS detection in single cells

MicroRNAs (miRNAs) are very important for the early diagnosis and prognosis of tumors. In this work, we achieved the simultaneous detection of microRNA-155 (miR-155) and microRNA-21 (miR-21) with a dual target recognition probe (DRP) based on the nonlinear hybridization chain reaction (HCR). The multi-branched DNA products, three-dimensional multi-hotspot DNA dendrimers (3DmhD) were used in the amplification of the target miRNAs signal. The DRP is constructed with a core of gold nanocages (AuNCs), modified by nucleic acid probes and labeled with Raman signaling molecules ROX and Cy3. Experiments demonstrated that DRP could activate the multi-branched DNA reaction and generate 3DmhD in the presence of miR-155 and miR-21, which can achieve effective amplification of miR-21 and miR-155. When Surface Enhanced Raman Scattering (SERS) analysis was performed on 3DmhD, the multi-hot spot effect of 3DmhD significantly enhanced the signals of ROX and Cy3, allowing ultra-sensitive detection of miR-21 and miR-155 in vitro. To our delight, DRP also exhibited sensitive specificity and significant signal amplification for intracellular miRNAs. These results revealed that DRP has the potential to screen tumor cells by analyzing the expression levels of intracellular miRNAs.

Portable nanopore-sequencing technology: Trends in development and applications

Sequencing technology is the most commonly used technology in molecular biology research and an essential pillar for the development and applications of molecular biology. Since 1977, when the first generation of sequencing technology opened the door to interpreting the genetic code, sequencing technology has been developing for three generations. It has applications in all aspects of life and scientific research, such as disease diagnosis, drug target discovery, pathological research, species protection, and SARS-CoV-2 detection. However, the first- and second-generation sequencing technology relied on fluorescence detection systems and DNA polymerization enzyme systems, which increased the cost of sequencing technology and limited its scope of applications. The third-generation sequencing technology performs PCR-free and single-molecule sequencing, but it still depends on the fluorescence detection device. To break through these limitations, researchers have made arduous efforts to develop a new advanced portable sequencing technology represented by nanopore sequencing. Nanopore technology has the advantages of small size and convenient portability, independent of biochemical reagents, and direct reading using physical methods. This paper reviews the research and development process of nanopore sequencing technology (NST) from the laboratory to commercially viable tools; discusses the main types of nanopore sequencing technologies and their various applications in solving a wide range of real-world problems. In addition, the paper collates the analysis tools necessary for performing different processing tasks in nanopore sequencing. Finally, we highlight the challenges of NST and its future research and application directions.

Lego-Like Catalytic Hairpin Assembly Enables Controllable DNA-Oligomer Formation and Spatiotemporal Amplification in Single Molecular Signaling

While the solid-state nanopore shows increasing potential during sensitive and label-free single molecular analysis, target concentration and signal amplification method is in urgent need. In this article, a solution via designing a model nucleic acid circuit reaction that can produce "Y" shape-structure three-way DNA oligomers with controllable size and polymerization degree is proposed. Such a so-called lego-like three-way catalytic hairpin assembly (LK-3W-CHA) can provide both concentration amplification (via CHA circuit) and programmable size control (via lego-like building mode) to enhance spatiotemporal resolution in single molecular sensing of solid-state nanopore. Oligomers containing 1-4 DNA three-way junctions (Y monomers, Y1-Y4) are designed in proof-of-concept experiments and applications. When the oligomers are applied to direct translocation measurements, Y2-Y4 can significantly increase the signal resolution and stability than that of Y1. Meanwhile, Y1 to Y4 can be used as the tags on the long DNA carrier to provide very legible secondary signals for specific identification, multiple assays, and information storage. Compared with other possible tags, Y1-Y4 provides higher signal density and amplitude, and quasi-linear "inner reference" for each other, which may provide more systematic, reliable, and controllable experimental results.

Development of Enzyme-Free DNA Amplifier Based on Chain Reaction Principle

Enzyme-free DNA amplifiers can amplify the signal of nucleic acid molecules. They can be applied to DNA molecular operation and nucleic acid detection. The reaction speed is the core index to evaluate DNA amplifiers. In this study, we designed a DNA amplifier based on an enzyme-free chain reaction. This DNA amplifier can release one more signal molecule in each round of reaction and trigger the next round, which significantly improved reaction speed. Moreover, because the amplifier used a stable DNA structure, the reaction can occur at room temperature. To integrate the amplifier into other DNA molecular operations, we performed the amplification reaction in a microfluidic chip module. The results showed that the amplifier can realize real-time signal feedback at a proper input molecule concentration and reach the endpoint in 40 s, even at a low relative concentration. To apply the amplifier for nucleic acid detection, we also used a conventional fluorescent polymerase chain reaction instrument for the reaction. The results showed that the amplifier specifically detected trace DNA single-stranded molecules. To solve the leakage problem of existing amplifiers, we designed a DNA molecule as the chain reaction's inhibitor, which was crucial in controlling the reaction speed and preventing leakage. STATEMENT OF SIGNIFICANCE: Traditional amplifier strategies of enzyme-free DNA amplifiers relied on a constant number of cycling molecules to catalyze the amplifier molecules' changing structure and release fluorescent signals, which lead low reaction speed. Based on an enzyme-free chain reaction, we designed a DNA amplifier which can release one more cycling molecule in each loop and trigger the next loop and significantly improve reaction speed in this study. Our analysis on microfluidic chip module and PCR instrument verifies high sensitivity and selectivity. And this strategy of DNA amplifier realizes the control of reaction and prevents leakage. We believe that this automated amplification strategy could have great applications in vivo signal detection, imaging, and signal molecule translation.

A Pax-5a gene analysis approach enabled by selective digestion with lambda exonuclease

Owing to the rapid increase in acute leukemia patients, the detection of Pax-5a, which is a tumor marker, is very important for the early diagnosis of patients. Therefore, by combining the selective digestion function of lambda exonuclease and the hybridization chain reaction (HCR) enzyme-free amplification system, we design a biosensor to detect the Pax-5a gene with high sensitivity. Lambda exonuclease can cleave the blunt end formed by the hairpin probe and the Pax-5a gene, which exposes the nucleic acid sequence that can initiate the HCR. When the HCR is triggered, the fluorophore and quencher on H1 and H2 move away from each other, so that the fluorescence signal of the quenched fluorophore can be recovered. Under optimal experimental conditions, a good linear relationship was established between the fluorescence intensity and the logarithm of the target concentration, and the limit of detection (LOD) of Pax-5a was calculated to be 7.6 pM. In addition, the biosensor can not only discriminate the base mismatch sequences of the Pax-5a gene, but also be suitable for target detection in complex human serum samples. Therefore, this biosensor, with the advantages of simple operation, high sensitivity, and good selectivity, has a good application prospect and guiding role in the diagnosis of acute B lymphocytic leukemia and the design of biosensors.

Plasma colorimetric aptasensor for the detection of chloramphenicol in honey based on cage Au@AuNPs and cascade hybridization chain reaction

A plasma colorimetric aptasensor was developed for rapid determination of chloramphenicol (CAP) in honey on site. Herein, cage gold shell@core nanoparticles (Au@AuNPs) were synthesized to enhance signal response and broaden the linear range. In addition, aptamer-based cascade hybridization chain reaction (cHCR), consisting of HP1, HP2, HP3, and HP4, was also designed for signal amplification and specific analysis. In this assay, HP1 and HP4 were immobilized on the surface of cage Au@AuNPs. In the presence of CAP, cHCR was triggered, and frond-like DNA products were formed, which made the distance among the cage Au@AuNPs closer and the system color changed from red to deep purple. Qualitative and quantitative analysis were carried out according to color changes and UV-Vis spectra. Under the optimized conditions, the wavelength of UV-Vis absorption peak exhibited a good linear relationship with CAP concentration in the range of 5.0 to 500 nmol/L with the detection limit of 1.2 nmol/L (S/N = 3). This aptasensor also showed good specificity for CAP detection compared with other antibiotics similar to the target analyte. Furthermore, the colorimetric aptasensor was successfully applied to the detection of CAP in honey with recoveries of 88.0-107.6%. This cHCR-based aptasensing for CAP possesses high sensitivity, good selectivity, low cost and excellent stability, and could be extended to detect a wide variety of other small molecular analytes, nucleic acids or proteins. Therefore, the versatile method might become a potential alternative tool in food analysis and environmental monitoring.

An aptamer-assisted biological nanopore biosensor for ultra-sensitive detection of ochratoxin A with a portable single-molecule measuring instrument

Biological nanopore-based single-molecule detection technology has shown ultrahigh sensitivity to various target analyte. But the detection scope of interesting targets is limited due to the lack of effective signal conversion strategies. In addition, conventional nanopore detection instruments are cumbersome, resulting nanopore detection can only be performed in laboratory. Herein, a customizable nanopore current amplifier is constructed to lower the cost and increase the portability of the nanopore instrument, and then an immobilized aptamer-based signal conversion strategy is proposed for α-hemolysin (α-HL) nanopore to detect small molecules (ochratoxin A, OTA). The presence of OTA in sample would trigger the release of probe single-strand DNA (ssDNA) from magnetic beads, which could subsequently cause current blockage in nanopore. The results show that the signal frequency of probe ssDNA has a linear relationship with the OTA concentration in the range of 2 × 10¹～2 × 10³ pmol/L. Compared to other methods, our sensing system has achieved an ultra-sensitive detection of OTA with the detection limit as low as 1.697 pmol/L. This strategy could broaden the scope of nanopore detection and have the potential for rapid and in-situ detection of other food contaminants in the future.

A primer extension activating 3D DNAzyme walker for in situ imaging and sensitive detection of telomerase activity

Acquiring information on telomerase activity at multiple levels contributes to a better understanding of its role in various physiological and pathological processes. Herein, a primer extension activating 3D DNAzyme walker is developed for in situ imaging and sensitive detection of telomerase activity. This walker is constructed via co-modifying specially designed hairpin structured walking strands and track strands on a gold nanoparticle (AuNP). The walking strand contains a pre-blocked DNAzyme sequence and a telomerase primer hybridized to its root. The track strand embeds at an RNA cleavage site and is labeled with the FAM group. After this walker is taken up by cells, the telomerase primer is extended under the action of endogenous telomerase to liberate DNAzyme. The liberated DNAzyme cuts track strands in the presence of the cofactor Mn²⁺ to drive the walker's processive operation, resulting in an enhanced fluorescence recovery of the AuNP-quenched FAM fluorophore. In situ imaging of telomerase activity in three different cell lines (MCF-7 cells, HeLa cells and HL-7702 cells) was well implemented. The discrimination of cancer cells from normal cells and the screening of telomerase inhibitors have been achieved. The sensitive detection of telomerase activity in HeLa cell lysate has also been realized with a detection limit of 10 cells. This walker performed a new approach for monitoring telomerase activity from different levels, providing a potential tool for clinical diagnosis, prognostic evaluation and drug screening.

Application of Nanomaterials in Isothermal Nucleic Acid Amplification

Because of high sensitivity and specificity, isothermal nucleic acid amplification are widely applied in many fields. To facilitate and improve their performance, various nanomaterials, like nanoparticles, nanowires, nanosheets, nanotubes, and nanoporous films are introduced in isothermal nucleic acid amplification. However, the specific application, roles, and prospect of nanomaterials in isothermal nucleic acid amplification have not been comprehensively reviewed. Here, the application of different nanomaterials (0D, 1D, 2D, and 3D) in isothermal nucleic acid amplification is comprehensively discussed and recent progress in the field is summarized. The nanomaterials are mainly used for reaction enhancer, signal generation/amplification, or surface loading carriers. In addition, 3D nanomaterials can be also functioned as isolated chambers for digital nucleic acid amplification and the tools for DNA sequencing of amplified products. Challenges and future recommendations are also proposed to be better used for recent covid-19 detection, point-of-care diagnostic, food safety, and other fields.

Plasmonic biosensor for the highly sensitive detection of microRNA-21 via the chemical etching of gold nanorods under a dark-field microscope

MicroRNAs involved in tumor-related tissues at abnormal expression level present tremendous potential in the early diagnosis of cancers. However, their intrinsic shortcomings, for instance, low abundance and high sequence homology, make it challengeable to quantify them with high sensitivity and selectivity. Herein, a highly sensitive platform with great specificity was developed for microRNA-21 based on the produced-I₂ triggered chemical etching of gold nanorods to a smaller size, resulting in a significant blue shift and a great intensity decrease in the localized surface plasmon resonance (LSPR) scattering. The synergism of strand displacement and enzymatic reaction enabled the proposed strategy with a high sensitivity and selectivity toward microRNA-21 in a dynamic range from 0.1 to 10,000 pM and a low limit of detection of 71.22 fM (3σ/k) by dark-field microscope. Additionally, the remarkable discrimination of single nucleotide difference suggested the superior selectivity towards microRNA-21, which presented a satisfactory recovery in human serum samples. The proposed plasmon platform could also serve as a universal and sensitive detection of cancer biomarkers, presenting the amusing application prospects in the early diagnosis of various cancers by adapting the corresponding nucleic acid sequences.

A sensitive platform for DNA detection based on organic electrochemical transistor and nucleic acid self-assembly signal amplification

Highly sensitive detection of DNA is of great importance for the detection of genetic damage and errors for the diagnosis of many diseases. Traditional highly sensitive organic electrochemical transistor (OECT)-based methods mainly rely on good conductivity materials, which may be limited by complex synthesis and modification steps. In this work, DNA biosensor based on OECT and hybridization chain reaction (HCR) signal amplification was demonstrated for the first time. Au nanoparticles were electrochemically deposited on the Au gate electrode to increase the surface area. Then, the HCR products, long negatively charged double-stranded DNA, were connected to the target by hybridization, which can increase the effective gate voltage offset of OECT. This sensor exhibited high sensitivity and even 0.1 pM target DNA could be directly detected with a significant voltage shift. In addition, it could discriminate target DNA from the mismatched DNA with good selectivity. This proposed method based on HCR in DNA detection exhibited an efficient amplification performance on OECT, which provided new opportunities for highly sensitive and selective detection of DNA.

A new method has been developed for DNA detection by integrating hybridization chain reaction signal amplification with organic electrochemical transistor device for the first time.

Application of Data Science in Circulating Tumor DNA Detection: A Promising Avenue Towards Liquid Biopsy

The circulating tumor DNA (ctDNA), as a promising biomarker of liquid biopsy, has potential clinical relevance on the molecular diagnosis and monitoring of cancer. However, the trace concentration level of ctDNA in the peripheral blood restricts its extensive clinical application. Recently, high-throughput-based methodologies have been leveraged to improve the sensitivity and specificity of ctDNA detection, showing a promising avenue towards liquid biopsy. This review briefly summarizes the high-throughput data features concerned by current ctDNA detection strategies and the technical obstacles, potential solutions, and clinical relevance of current ctDNA profiling technologies. We also highlight future directions improving the limit of detection of ctDNA for better clinical application. This review may serve as a reference for the crosslinks between data science and ctDNA-based liquid biopsy, benefiting clinical translation in advanced cancer diagnosis.

Specific and sensitive detection of CircRNA based on netlike hybridization chain reaction

Circular RNA (circRNA), as a new class of biomarker, plays an important role in the occurrence and development of cancer. However, the limitations of detection methods in recent years have severely restricted the related research of circRNA. Here, we have developed an effective circRNA detection method based on the thermostatic netlike hybridization chain reaction (HCR). It combines reverse transcription-rolling circle amplification (RT-RCA) with well-designed netlike HCR to achieve dual selection and dual signal amplification, which can eliminate the interference of linear isomers. This two-dimensional netlike HCR is composed of an ingeniously designed trigger chain and two hairpin fuel probes, which can generate a stable network structure with RT-RCA products containing multiple sets of repeats at a constant temperature, thereby producing enhanced fluorescent signals. Systematic studies reveal that the optimized netlike HCR system has higher detection efficiency for DNA strands containing multiple sets of repetitive sequences, can detect circRNA as low as 0.1 pM, and has excellent selectivity. By using human tumor cell lines and tissues, it has been verified that the netlike HCR-based method can accurately detect specific circRNA in real biological samples without RNase R enrichment, which provides a simple and useful platform for detecting low-abundance circRNA. Furthermore, the proposed strategy is also a potential method for detecting some genes containing repetitive sequences, such as telomere DNA, centromere DNA and ribosomal DNA (rDNA).

Proximity-Induced Hybridization Chain Reaction-Based Photoacoustic Imaging System for Amplified Visualization Protein-Specific Glycosylation in Mice

Glycosylation is a key cellular mechanism that regulates several physiological and pathological functions. Therefore, identification and characterization of specific-protein glycosylation in vivo are highly desirable for studying glycosylation-related pathology and developing personalized theranostic modalities. Herein, we demonstrated a photoacoustic (PA) nanoprobe based on the proximity-induced hybridization chain reaction (HCR) for amplified visual detection of protein-specific glycosylation in vivo. Two kinds of functional DNA probes were designed. A glycan probe (DBCO-GP) was attached to glycans through metabolic oligosaccharide engineering (MOE) and protein probe (PP)-targeted proteins by aptamer recognition. Proximity-induced hybridization of the complementary domain between the two kinds of probes promoted conformational changes in the protein probes and in situ release of the HCR initiator domain. Gold nanoparticles (AuNPs) modified by complementary sequences (Au-H1 and Au-H2) self-assembled into Au aggregates via the HCR, thereby converting DNA signals to photoacoustic signals. Due to the high contrast and deep penetration of photoacoustic imaging, this strategy enabled in situ detection of Mucin 1 (MUC1)-specific glycosylation in mice with breast cancer and successfully monitored its dynamic states during tunicamycin treatment. This imaging technique provides a powerful platform for studying the effects of glycosylation on the protein structure and function, which helps to elucidate its role in disease processes.

The mechanism and improvements to the isothermal amplification of nucleic acids, at a glance

A comparative review of the most common isothermal methods is provided. In the last two decades, the challenge of using isothermal amplification systems as an alternate to the most extensive and long-standing nucleic acids-amplifying method-the polymerase chain reaction-has arisen. The main advantage of isothermal amplification is no requirement for expensive laboratory equipment for thermal cycling. Considerable efforts have been made to improve the current techniques of nucleic acid amplification and the development of new approaches based on the main drawbacks of each method. The most important and challenging goal was to achieve a low-cost, straightforward system that is rapid, specific, accurate, and sensitive.

A sensitive electrochemiluminescence DNA biosensor based on the signal amplification of ExoIII enzyme-assisted hybridization chain reaction combined with nanoparticle-loaded multiple probes

An electrochemiluminescence (ECL) DNA biosensor based on ExoIII exonuclease assistance and hybridization chain reaction (HCR) amplification technology has been constructed. ExoIII exonuclease and triple-helix DNA molecular switch are used in detecting a target in circulation. By combining HCR with AuNPs@DNA, a novel signal probe is built, which enables multiple signal amplification and the high-sensitive detection of transgenic rice BT63 DNA. The Fe₃O₄@Au solution is added to a magneto-controlled glassy carbon electrode, and sulfhydryl-modified capture DNA (CP) is immobilized on Fe₃O₄@Au through the Au-S bond. Mercaptoethanol is added to close sites and prevent the nonspecific adsorption of CP on the magnetron glassy carbon electrode. A target DNA is added to a constructed triple-helix DNA molecular centrifuge tube for reaction. Owing to base complementation and the reversible switching of the triple-helix DNA molecular state, the target DNA turns on the triple-helix DNA molecular switch and hybridizes with a long-strand recognition probe (RP) to form a double-stranded DNA (dsDNA). Exonuclease ExoIII is added to specifically recognize and cut the dsDNA and to release the target DNA. The target DNA strand then circulates back completely to open the multiple triple-helix DNA molecular switch, releasing a large number of signal transduction probes (STP). To hybridize with CP, a large amount of STP is added to the electrode. Finally, a AuNPs@DNA signal probe is added to hybridize with STP. H1 and H2 probes are added for the hybridization chain reaction and the indefinite extension of the primer strand on the probe. Then, tris-(bipyridyl)ruthenium(II) is added for ECL signal detection with PBS-tri-n-propylamine as the base solution. In the concentration range 1.0 × 10^-16 to 1.0 × 10^-8 mol/L of the target DNA, good linear relationship was achieved with the corresponding ECL signal. The detection limit is 3.6 × 10^-17 mol/L. The spiked recovery of the rice samples range from 97.2 to 101.5%. The sensor is highly sensitive and has good selectivity, stability, and reproducibility. A novel electrochemiluminescence biosensor with extremely higher sensitivity was prepared for the determination of ultra-trace amount transgenic rice BT63 DNA. The sensitivity was significantly improved by multiple signal enhancements. Firstly, a large number of signal transduction probes are released when the triple-helix DNA molecular switch unlock after recycles assisted by ExoIII exonuclease under target BT63 DNA; and then the signal transduction probes hybridize with the signal probes of AuNPs@(DNA-HCR) produced through hybridization chain reaction. Finally, the signal probes which were embedded with a large amount of electrochemiluminescence reagent produce high luminescence intensity. The detection limit was 3.6 × 10^-17 mol/L, which is almost the most sensitive methods reported.

The Recent Development of Hybridization Chain Reaction Strategies in Biosensors

With the continuous development of biosensors, researchers have focused increasing attention on various signal amplification strategies to pursue superior performance for more applications. In comparison with other signal amplification strategies, hybridization chain reaction (HCR) as a powerful signal amplification technique shows its certain charm owing to nonenzymatic and isothermal features. Recently, on the basis of conventional HCR, this technique has been developed and improved rapidly, and a variety of HCR-based biosensors with excellent performance have been reported. Herein, we present a systematic and critical review on the research progress of HCR in biosensors in the last five years, including the newly developed HCR strategies such as multibranched HCR, migration HCR, localized HCR, in situ HCR, netlike HCR, and so on, as well as the combination strategies of HCR with isothermal signal amplification techniques, nanomaterials, and functional DNA molecules. By illustrating some representative works, we also summarize the advantage and challenge of HCR in biosensors, and offer a deep discussion of the latest progress and future development trends of HCR in biosensors.

Electrochemical mixed aptamer-antibody sandwich assay for mucin protein 16 detection through hybridization chain reaction amplification

A mixed aptamer-antibody sandwich assay for the determination of mucin protein 16 (MUC16) was developed based on hybridization chain reaction (HCR) with methylene blue (MB) as an electrochemical indicator. First, MUC16 antibody was adsorbed onto the surface of the Au nanoparticle (AuNP)-modified indium tin oxide (ITO) electrode to effectively capture the target MUC16. After MUC16 was captured by the MUC16 aptamer, an antibody/MUC16/aptamer sandwich structure formed for the highly selective detection of MUC16. The 3' end of the aptamer was then subjected to HCR with the assistance of auxiliary probes to obtain DNA concatemers. Numerous MB molecules bonded with G bases in the DNA concatemers by immersing the modified ITO electrode into a stirred solution containing MB with KCl. Stepwise changes in the microscopic features of the electrode surface were studied by scanning electron microscopy (SEM). Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the electrochemical behavior of the different modified electrodes. The oxidation current of MB was detected by differential pulse voltammetry (DPV). Under the optimum conditions, the proposed mixed aptamer-antibody sandwich assay showed wide dynamic range from 0.39 to 200 unit mL^-1 with a low detection limit of 0.02 unit mL^-1 (S/N ratio = 3). The proposed method showed good accuracy, selectivity, and acceptable reproducibility. Graphical abstract An electrochemical mixed aptamer-antibody sandwich assay based on the aptamer-induced HCR amplification strategy was fabricated for the highly sensitive detection of MUC16. The mixed aptamer-antibody sandwich assay showed acceptable performance of detection range, detection limit, reproducibility, and selectivity.