Synthesis of a PEDOT-TiO2 heterostructure as a dual biosensing platform operating via photoelectrochemical and electrochemical transduction mode

An ultrasensitive photo-driven self-powered aptasensor for microcystin-RR assay based on ZnIn2S4/Ti3C2 MXenes integrated with a matching capacitor for multiple signal amplification

A photo-driven self-powered aptasensor was constructed based on a matching capacitor and the ZnIn2S4/Ti3C2 heterojunction as the photoanode and Cu2O as the photocathode in a dual-photoelectrode sensing matrix for multiple signal amplification for the ultrasensitive detection of microcystin-RR (MC-RR). The introduction of Ti3C2 MXene nanosheets on the photoanode surface can not only accelerate the transfer and separation of photoinduced electron/hole pairs, thus enhancing the output signal of the photo-driven self-powered system, but also provide a larger specific surface area for the immobilization of the bio-recognition unit aptamer. More importantly, for a portable and miniaturized device, a micro-workstation with the size of a universal serial bus (USB) disk and a novel short-circuit current access was proposed to capture the instantaneous output electrical signal for real-time data tracking. In such a way, a sensitivity of 2.7 mA pM-1 was achieved when the matching capacitor was integrated into the self-powered system, which was 22 times that without a capacitor. After the interaction between MC-RR and the corresponding aptamer, a 'signal-off' detection configuration was formed via the steric hindrance effect. Therefore, such a multiple signal amplification system realized the ultrasensitive and selective determination of MC-RR successfully. Under optimal conditions, the linear range of the self-powered aptasensor was 0.1 to 100 pM and the detection limit was 0.033 pM (S/N = 3). The aptasensor was applied to the detection of MC-RR in fish, exhibiting good reproducibility (≈3.88%), paving the way for detecting microcystins in real-life samples.

Highly efficient photocathodic cascade material for constructing sensitive photoelectrochemical biosensor

Photocathodic biosensor possesses excellent anti-interference capability in bioanalysis, which however suffers from high electron-hole recombination rate with low photocurrent. Herein, a high-performance inorganic organic P₃HT@C₆₀@ZnO nanosphere with cascade energy band arrangement was synthesized as photoactive signal probe, which inherited the advantages of inorganic strong optical absorptivity and organic high mobility for photo-generated holes. Specifically, the well-matched band gap endowed not only the improved life for light generated carrier and promoted separation of electron-hole pairs, but also the expansion of charge-depletion layer, significantly improving the photoelectric conversion efficiency for acquiring an extremely high photocathodic signal that increased by 30 times compared with individual materials. Accordingly, by integrating with the efficient amplification of DNA nanonet derived from clamped hybrid chain reaction (C-HCR), a sensitive P₃HT@C₆₀@ZnO nanosphere based photocathodic biosensor was proposed for accurate detection of p53. The experimental results showed that the biosensor had a wide detection range from 0.1 fM to 10 nM and a low detection limit of 0.37 fM toward p53, offering a new avenue to construct sensitive PEC platform with superior anti-interference ability and hold a prospective application in early disease diagnosis and biological analysis.

Role of hypoxia in cellular senescence

Senescent cells persist and continuously secrete proinflammatory and tissue-remodeling molecules that poison surrounding cells, leading to various age-related diseases, including diabetes, atherosclerosis, and Alzheimer's disease. The underlying mechanism of cellular senescence has not yet been fully explored. Emerging evidence indicates that hypoxia is involved in the regulation of cellular senescence. Hypoxia-inducible factor (HIF)- 1α accumulates under hypoxic conditions and regulates cellular senescence by modulating the levels of the senescence markers p16, p53, lamin B1, and cyclin D1. Hypoxia is a critical condition for maintaining tumor immune evasion, which is promoted by driving the expression of genetic factors (such as p53 and CD47) while triggering immunosenescence. Under hypoxic conditions, autophagy is activated by targeting BCL-2/adenovirus E1B 19-kDa interacting protein 3, which subsequently induces p21WAF1/CIP1 as well as p16Ink4a and increases β-galactosidase (β-gal) activity, thereby inducing cellular senescence. Deletion of the p21 gene increases the activity of the hypoxia response regulator poly (ADP-ribose) polymerase-1 (PARP-1) and the level of nonhomologous end joining (NHEJ) proteins, repairs DNA double-strand breaks, and alleviates cellular senescence. Moreover, cellular senescence is associated with intestinal dysbiosis and an accumulation of D-galactose derived from the gut microbiota. Chronic hypoxia leads to a striking reduction in the amount of Lactobacillus and D-galactose-degrading enzymes in the gut, producing excess reactive oxygen species (ROS) and inducing senescence in bone marrow mesenchymal stem cells. Exosomal microRNAs (miRNAs) and long noncoding RNAs (lncRNAs) play important roles in cellular senescence. miR-424-5p levels are decreased under hypoxia, whereas lncRNA-MALAT1 levels are increased, both of which induce cellular senescence. The present review focuses on recent advances in understanding the role of hypoxia in cellular senescence. The effects of HIFs, immune evasion, PARP-1, gut microbiota, and exosomal mRNA in hypoxia-mediated cell senescence are specifically discussed. This review increases our understanding of the mechanism of hypoxia-mediated cellular senescence and provides new clues for anti-aging processes and the treatment of aging-related diseases.

Antibody-free photoelectrochemical biosensor for DNA carboxylation detection based on SnS2@Ti3C2 heterojunction

As an important epigenetic modification, 5-carboxycytosine (5caC) played an important role in gene regulation, cell differentiation and growth. 5caC existed in many cells and tissues, but it was highly similar to the structure of other cytosine derivatives and had less content in the genome. Therefore, it was urgent to develop a sensitive and highly selective trace biosensor to detect 5caC. A novel photoelectrochemical biosensor was fabricated for 5-carboxy-2'-deoxycytidine-5'-triphosphate (5cadCTP) detection, where SnS₂@Ti₃C₂ nanocomposite was employed as photoactive material, polyethyleneimine was used as 5cadCTP recognition and capture reagent, and Ru(NH₃)₆³⁺ was used as photosensitizer for signal amplification. Due the good conductivity of Ti₃C₂ MXene and the matched energy band between Ti₃C₂ MXene and SnS₂, SnS₂@Ti₃C₂ nanocomposite presented strong photoactivity, which was beneficial to the high detection sensitivity. For specific recognition of 5cadCTP, the covalent interaction of -NH₂ in 5cadCTP with -COOH on the substrate electrode was used, which was beneficial to the high detection selectivity. A broad linear relationship between photocurrent and 5cadCTP concentration was observed ranging from 1 pM to 0.2 μM. The low detection limit of 260 fM was achieved. The developed method has high detection specificity and can even distinguish 5caC with its derivatives. In addition, the applicability was evaluated by detecting the content change of 5caC in the genomic DNA of rice seedlings after cultured with environmental pollutants. This work provides a novel platform for 5cadCTP detection, and it can also be applied to detect other cytosine derivatives with suitable recognition strategies.

Design of Ti-Pt Co-doped α-Fe2O3 photoanodes for enhanced performance of photoelectrochemical water splitting

This study demonstrates Ti and Pt co-doping can synergistically improve the PEC performance of the α-Fe₂O₃ photoanode. By varying the doping methods, the sample with in-situ Ti ex-situ Pt doping (Ti_i-Pt_e) exhibits the best performance. It demonstrates that Ti doping in bulk facilities charge separation and Pt doping on the surface further accelerates charge transfer. In contrast, Ti doping on the surface inhibits charge separation, and Pt doping in bulk hinders charge separation and transfer. HCl treatment is used to minimize the onset potential further, while it is favorable for the ex-situ doped α-Fe₂O₃, which is more efficient on Ti_e than the Pt_e-doped ones. On the ex-situ Ti-doped α-Fe₂O₃ after HCl treatment, anatase TiO₂ is probed, suggesting that Ti-O bonds accumulate when Fe-O bonds are partly removed, which enhances the charge transfer in surface states. Unfortunately, HCl treatment also induces lattice defects that are adverse to charge transport, inhibiting the performance of in-situ doped α-Fe₂O₃ and excessively treated ex-situ doped ones. Coupled with methanol solvothermal treatment and NiOOH/FeOOH cocatalysts loading, the optimized Ti-Pt/Fe₂O₃ photoanode exhibits an impressive photocurrent density of 2.81 mA cm^-2 at 1.23 V vs. RHE and a low onset potential of 0.60 V vs. RHE.

Dual II-scheme nanosheet-like Bi2S3/Bi2O3/Ag2S heterostructures for ultrasensitive PEC aptasensing of aflatoxin B1 coupled with catalytic signal amplification by dendritic nanorod-like Au@Pd@Pt nanozyme

As one of the most toxic chemical substances, aflatoxin B1 (AFB1) has a strong carcinogenic effect even at a trace level in human and animal, which severely threatens human health and even causes cancers. Therefore, ultrasensitive detection of AFB1 is of significant importance. For such analysis, dual II-scheme sheet-like Bi₂S₃/Bi₂O₃/Ag₂S heterostructures were prepared by the in-situ growth method, which exhibited high separation efficiency for the electron-hole (e^--h⁺) pairs, prominent stability, and high photoactivity. Moreover, the dendritic nanorod-like Au@Pd@Pt (Au@Pd@Pt DNRs) nanozyme was homely synthesized, whose peroxidase-like activity was scrupulously investigated by catalytical oxidation of diaminobenzidine (DAB) in the presence of H₂O₂. Integration by the aptasensing strategy, a photoelectrochemical (PEC) "signal-on" aptasensor was prepared, which exhibited a broader linear range of 0.5 pg mL^-1-100 ng mL^-1 with a lower limit of detection (LOD = 0.09 pg mL^-1, S/N = 3). This work provides a feasible strategy to develop advanced PEC biosensors for actual analysis of environmental pollutants.

Ultrasensitive photoelectrochemical biosensor for DNA 5-methylcytosine analysis based on co-sensitization strategy combined with bridged DNA nanoprobe

Altered DNA methylation in the form of 5-methylcytosine (5-mC) patterns is correlated with disease diagnosis, prognosis, and treatment response. Therefore, accurate analysis of 5-mC is of great significance for the diagnosis of diseases. Here, an efficient enhanced photoelectrochemical (PEC) biosensor was designed for the quantitative analysis of DNA 5-mC based on a cascaded energy level aligned co-sensitization strategy coupling with the bridged DNA nanoprobe (BDN). Firstly, Au nanoparticle/graphite phase carbon nitride/titanium dioxide (AuNPs/g-C₃N₄@TiO₂) nanocomposite was synthesized through in situ growth of AuNPs on g-C₃N₄@TiO₂ surface as a matrix to provide a stable background signal. Next, BDN with a high mass transfer rate synthesized from a pair of DNA tetrahedral as nanomechanical handles was used as a capture probe to bind to the target sequence. The polydopamine nanosphere was applied to load with CdTe QDs (PDANS-CdTe QDs) as a photocurrent label of 5-mC antibodies. When the 5-mC existed, a large number of PDANS-Ab-CdTe QDs were introduced to the electrode surface, the formed CdTe QDs/AuNPs/g-C₃N₄@TiO₂ co-sensitive structure could effectively enhance the electron transfer capability and photocurrent response rate due to the effective cascade energy level arrangement, leading to a significantly enhanced photocurrent signal. The proposed PEC biosensor manifested a wide range from 10^-17 M to 10^-7 M and a detection limit of 2.2 aM. Meanwhile, the excellent performance indicated the practicability of the designed strategy, thus being capable of the clinical diagnosis of 5-mC.

Z-scheme Cu2MoS4/CdS/In2S3 nanocages heterojunctions-based PEC aptasensor for ultrasensitive assay of fumonisin B1 via signal amplification with hollow PtPd–CoSnO3 nanozyme

Fumonisin B1 (FB1), the most prevalent and highest toxicity mycotoxins among fumonisins family, poses threats to human especially children and infants even at a trace level. Therefore, its facile and sensitive detection is of importance. Herein, Z-scheme Cu₂MoS₄/CdS/In₂S₃ nanocage-like heterojunctions (labeled Cu₂MoS₄/CdS/In₂S₃) were synthesized, whose photoelectrochemical (PEC) property and electron transfer mechanism were strictly investigated. The Cu₂MoS₄/CdS/In₂S₃ behaved as photoactive substrate for building a PEC sensing platform for detection of FB1, integrated with PtPd alloy modified hollow CoSnO₃ nanoboxes (labeled PtPd-CoSnO₃) nanozyme. By virtue of the stronger affinity between the target FB1 and its aptamer (FB1-Apt), the photocurrent was recovered by releasing the CoSnO₃-PtPd₃ modified FB1-Apt (FB1-Apt/PtPd-CoSnO₃) from the photoanode, which can terminate the catalytic precipitation reaction for its peroxidase-like property. The resultant PEC aptasensor exhibited a wider dynamic linear range from 1 × 10^-4 to 1 × 10² ng mL^-1 with a lower limit of detection (0.0723 pg mL^-1). Thus, this research provides a feasible PEC sensing platform for routine analysis of other mycotoxins in practice.

ZnO/C nanocomposite grafted molecularly imprinted polymers as photoelectrochemical sensing interface for ultrasensitive and selective detection of chloramphenicol

Nanomaterials-based photoelectrochemical (PEC) detection is becoming a rapidly-developing analytical technique in chemical and biological assays due to its unique advantages of easy miniaturization, high sensitivity, and rapid turnaround time. Herein, a molecularly imprinted polymer-assisted PEC sensor based on ZnO/C nanocomposite was successfully fabricated for the highly sensitive and selective determination of chloramphenicol (CAP). Benefiting from the hydrophilic functional groups (-OH, -COOH) and large surface area of bio-templated ZnO/C nanocomposite, the tight grafting of MIP with excellent recognition ability on substrate is easier and more stable than traditional PEC sensor, thus significantly increasing the performance. Under optimal conditions, the PEC sensor exhibited significant CAP detection performance in the range of 0.01-5000 ng mL^-1 with a detection LOD of 5.08 pg mL^-1 (S/N = 3) and successfully applied to the detection of CAP in milk sample. Our results show that ZnO/C nanocomposite and MIP can act as an efficient photo-responsible matrix to fabricate PEC sensor, providing important application potentials for pollutants control in food and environment.

Nonenzymatic Lactic Acid Detection Using Cobalt Poly-phthalocyanine/Carboxylated Multiwalled Carbon Nanotube Nanocomposites Modified Sensor

In this study, a novel cobalt polyphthalocyanine/carboxylic acid functionalized multiwalled carbon nanotube nanocomposite (CoPPc/MWCNTs-COOH) to detect lactic acid was successfully fabricated. The nanocomposite was systematically characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, ultraviolet–visible absorption spectroscopy, and X-ray photoelectron spectroscopy. The nanocomposite provided excellent conductivity for effective charge transfer and avoided the agglomeration of MWCNTs-COOH. The electrochemical surface area, diffusion coefficient and electron transfer resistance of the CoPPc/MWCNTs-COOH glassy carbon electrode (CoPPc/MWCNTs-COOH/GCE) were calculated as A = 0.49 cm2, D = 9.22 × 10−5 cm2/s, and Rct = 200 Ω, respectively. The lactic acid sensing performance of the CoPPc/MWCNTs-COOH was evaluated using cyclic voltammetry in 0.1 M PBS (pH 4). The results demonstrated that the novel electrode exhibited excellent electrochemical performance toward lactic acid reduction over a wide concentration range (10 to 240 μM), with a low detection limit (2 μM (S/N = 3)), and a reasonable selectivity against various interferents (ascorbic acid, uric acid, dopamine, sodium chloride, glucose, and hydrogen peroxide). Additionally, the electrode was also successfully applied to quantify lactic acid in rice wine samples, showing great promise for rapid monitoring applications.

Micro- and nanosensors for detecting blood pathogens and biomarkers at different points of sepsis care

Severe infections can cause a dysregulated response leading to organ dysfunction known as sepsis. Sepsis can be lethal if not identified and treated right away. This requires measuring biomarkers and pathogens rapidly at the different points where sepsis care is provided. Current commercial approaches for sepsis diagnosis are not fast, sensitive, and/or specific enough for meeting this medical challenge. In this article, we review recent advances in the development of diagnostic tools for sepsis management based on micro- and nanostructured materials. We start with a brief introduction to the most popular biomarkers for sepsis diagnosis (lactate, procalcitonin, cytokines, C-reactive protein, and other emerging protein and non-protein biomarkers including miRNAs and cell-based assays) and methods for detecting bacteremia. We then highlight the role of nano- and microstructured materials in developing biosensors for detecting them taking into consideration the particular needs of every point of sepsis care (e.g., ultrafast detection of multiple protein biomarkers for diagnosing in triage, emergency room, ward, and intensive care unit; quantitative detection to de-escalate treatment; ultrasensitive and culture-independent detection of blood pathogens for personalized antimicrobial therapies; robust, portable, and web-connected biomarker tests outside the hospital). We conclude with an overview of the most utilized nano- and microstructured materials used thus far for solving issues related to sepsis diagnosis and point to new challenges for future development.

Carbon dots induced in-situ formation of porous europium micro-networks with enhanced photocatalysis

Excellent photocatalysts are highly desirable for clean energy and pollutant treatment. Carbon dots (CDs)-based composite photocatalysts have been widely studied and utilized in catalytic fields. However, the preparation of the photocatalysts with high catalytic activity still faces a great challenge. Herein, white-light-driven CDs-based porous europium micro-networks (CDs@P-Eu-MNs) composite photocatalysts are prepared by a facile in-situ growth strategy. CDs can affect the morphology and produce a large number of porous structures of CDs@P-Eu-MNs. Importantly, the introduction of CDs not only increases the light absorption, but also promotes the separation of photogenerated charge carriers, and thus improve photocatalytic performance of CDs@P-Eu-MNs composites. CDs@P-Eu-MNs show the highest photocurrent density, which can be used for the highly-efficient photodegradation of rhodamine 6G dyes with almost 95% degradation rate under low power white light (20 W) without any radical generating agents such as H₂O₂. Therefore, this new and efficient CDs@P-Eu-MNs photocatalyst will have a great application prospect in water pollution treatment.

Amplified detection signal at a photoelectrochemical aptasensor with a poly(diphenylbutadiene)-BiOBr heterojunction and Au-modified CeO2 octahedrons

A major aspect of this work is the synergistic application of a poly(diphenylbutadiene)-BiOBr composite and a gold nanoparticle-linked CeO₂ octahedron to develop a photoelectrochemical aptasensor with an easily measurable detection signal change. Specifically, poly(diphenylbutadiene) nanofiber-immobilised BiOBr flower-like microspheres were developed as a hybrid material with a heterojunction that facilitates high visible light absorption and efficient photo-generated charge separation, which are essential features for sensitive photoelectrochemical sensors. The model analyte acetamiprid was attached via its specific aptamer on the aptasensor. Separately, a gold nanoparticle-linked CeO₂ octahedron was strategically used to significantly diminish the photocurrent by impeding electron transfer at the aptasensor surface. After acetamiprid binding, the CeO₂ octahedrons were displaced from the aptasensor. This caused a weakened quenching effect and restored the photocurrent to accomplish an "on-off-on" detection mechanism. This photoelectrochemical aptasensor exhibited a detection limit of 0.05 pM over a linear range of 0.1 pM-10 μM acetamiprid. The use of an aptamer has provided good specificity to acetamiprid and anti-interference. In addition, an ∼5.8% relative standard deviation was estimated as the reproducibility of the photoelectrochemical aptasensor. Furthermore, nearly 90% of the initial photocurrent was still measurable after storing these aptasensors at room temperature for 4 weeks, demonstrating their stability.

Clinically oriented Alzheimer's biosensors: expanding the horizons towards point-of-care diagnostics and beyond

The development of minimally invasive and easy-to-use sensor devices is of current interest for ultrasensitive detection and signal recognition of Alzheimer's disease (AD) biomarkers. Over the years, tremendous effort has been made on diagnostic platforms specifically targeting neurological markers for AD in order to replace the conventional, laborious, and invasive sampling-based approaches. However, the sophistication of analytical outcomes, marker inaccessibility, and material validity strongly limit the current strategies towards effectively predicting AD. Recently, with the promising progress in biosensor technology, the realization of a clinically applicable sensing platform has become a potential option to enable early diagnosis of AD and other neurodegenerative diseases. In this review, various types of biosensors, which include electrochemical, fluorescent, plasmonic, photoelectrochemical, and field-effect transistor (FET)-based sensor configurations, with better clinical applicability and analytical performance towards AD are highlighted. Moreover, the feasibility of these sensors to achieve point-of-care (POC) diagnosis is also discussed. Furthermore, by grafting nanoscale materials into biosensor architecture, the remarkable enhancement in durability, functionality, and analytical outcome of sensor devices is presented. Finally, future perspectives on further translational and commercialization pathways of clinically driven biosensor devices for AD are discussed and summarized.

Development of a molecularly imprinted photoelectrochemical sensing platform based on NH2-MIL-125(Ti)-TiO2 composite for the sensitive and selective determination of oxtetracycline

In this work, a molecularly imprinted photoelectrochemical (MIP-PEC) sensor based on a novel PEC composite of metal-organic frameworks (MOFs) and TiO₂ (NH₂-MIL-125(Ti)-TiO₂) was established for the ultrasensitive and selective detection of oxytetracycline (OTC). This is the first attempt of applying MOFs in the construction of MIP-PEC sensor. The NH₂-MIL-125(Ti)-TiO₂ was synthesized by a simple one-step solvothermal method and modified onto the surface of indium tin oxide (ITO) electrode as the photosensitive layer. Subsequently, molecularly imprinted polymer (MIP) was modified as recognition element by electropolymerization. The NH₂-MIL-125(Ti)-TiO₂ showed an enhanced photocurrent response due to stronger light absorption capacity and matched energy band. Furthermore, MIP greatly improved the selectivity and sensitivity of the constructed PEC sensor. The photocurrent response of the MIP-PEC sensor was reduced after OTC recognition because the specific binding of OTC to the imprinted cavities blocked the electron transfer of the electrode. Under optimal experimental conditions, the MIP-PEC sensor exhibited a wide detection range from 0.1 nM to 10 μM with a low limit of detection (LOD) of 60 pM, as well as certain reproducibility, stability and good applicability in real samples. The proposed sensor provides ideas for the application of MOFs in the construction of PEC sensors and will offer an alternative method for the detection of other pollutants in the field of food safety.

Photoelectrochemical thrombin biosensor based on perylene-3,4,9,10-tetracarboxylic acid and Au co-functionalized ZnO nanorods with signal-off quenching effect of Ag@Ag2S

In this work, a thrombin photoelectrochemical aptasensor was reported based on a photoanode of perylene-3,4,9,10-tetracarboxylic acid (PTCA), Au nanoparticle co-functionalized ZnO nanorods (ZnO NRs) and the "signal-off" amplification effect of Ag@Ag2S. The photocurrent response of the ZnO NRs was improved greatly due to the excellent visible-light photoelectric performance of PTCA and the surface plasmon resonance (SPR) effect of Au nanoparticles. Due to the specific recognition between thrombin and aptamers, the non-conductive complex with a steric hindrance structure blocked the diffusion path of the electron donating ascorbic acid (AA) and then the "signal-off" Ag@Ag2S quencher was captured. The quencher blocked the irradiation light toward the ZnO NRs/PTCA/Au electrode and competitively consumed the electron donor AA that could have been involved in the oxidation reaction with photogenerated holes of PTCA, resulting in the further decrease of the photocurrent. Based on the evident photocurrent response of the photoanode and the superior quenching strategies, the detection limit of thrombin is as low as 33 fM with a wide linear detection range from 0.0001 nM to 50 nM. The prepared biosensor also exhibited good specificity, reproducibility and stability, suggesting potential application in thrombin specific detection.

In situ creation of ZnO@CdS nanoflowers on ITO electrodes for sensitive photoelectrochemical detection of copper ions in blood

A highly selective and sensitive photoelectrochemical (PEC) detection method has been developed for the analysis of copper (Cu2+) ions using nanoflower-like ZnO@CdS heterojunctions, of which ZnO was first in situ grown onto the indium tin oxide electrodes by a hydrothermal method and then coated with CdS through the chemical bath deposition route. It was discovered that the ZnO@CdS heterojunction so formed could serve as a photosensitive catalyst with improved charge separation for visible-light-driven PEC responses. Enhanced visible-light harvesting of nanocomposites could also be expected with CdS as the visible-light sensitizer. Furthermore, the introduction of Cu2+ ions could cause a rational decrease in the photocurrents of nanocomposites through the specific interaction between CdS and Cu2+ ions. A ZnO@CdS heterojunction-based PEC sensor was thereby developed for the detection of Cu2+ ions in blood in the linear concentrations ranging from 0.50 to 80 nM, with a limit of detection of 0.18 nM. Such a heterojunction-based PEC detection platform constructed using two photocatalytic materials with matched band structures are promising for a wide range of applications for sensing Cu2+ ions in clinical diagnostics, food monitoring, and environmental analysis.

Oxygen vacancies enhanced photoelectrochemical aptasensing of 2, 3', 5, 5'-tetrachlorobiphenyl amplified with Ag3VO4 nanoparticle-TiO2 nanotube array heterostructure

This work proposed an enhancing mechanism of both oxygen vacancies (OVs) and the heterostructure for amplifying the photoelectrochemical (PEC) aptasensing signal. The OVs were formed by in situ electrochemical reduction of TiO₂ nanotube arrays (TNTAs), and well-separated Ag₃VO₄ nanoparticles (NPs) were then deposited on the TNTAs. The band gaps and positions of these nanomaterials were evaluated by Tauc equation and Mott-Schottky plots to verify the formation of the heterojunction. The OVs and heterojunction greatly enhanced the visible light absorption and improved the charge separation of TNTAs. The amplified PEC signal could be quenched by the resonance energy transfer between Ag₃VO₄ NPs and gold nanorods (Au NRs), which were labeled on the complementary DNA (cDNA) to the aptamer immobilized on the heterojunction. Upon the recognition of the aptamer to target analyte, the Au NR-cDNA was detached from the sensor, leading to a "signal-on" aptasensing strategy. Under optimal conditions, the PEC aptasensor displayed a detection limit of 0.015 pg mL^-1 and a linear range from 0.02 to 300 ng mL^-1 for 2,3',5,5'-tetrachlorobiphenyl.

Detection signal amplification strategies at nanomaterial-based photoelectrochemical biosensors

This review focusses on unique material modification and signal amplification strategies reported in developing photoelectrochemical biosensors with utmost sensitivity and selectivity.