"Aptamer-locker" DNA coupling with CRISPR/Cas12a-guided biosensing for high-efficiency melamine analysis

CRISPR-HOLMES-based NAD+ detection

Studies have indicated that the intracellular nicotinamide adenine dinucleotide (NAD+) level is associated with the occurrence and development of many diseases. However, traditional nicotinamide adenine dinucleotide (NAD+) detection techniques are time-consuming and may require large and expensive instruments. We recently found that the clustered regularly interspaced short palindromic repeat (CRISPR)-Cas12a protein can be inactivated by AcrVA5-mediated acetylation and reactivated by CobB, using NAD+ as the co-factor. Therefore, in this study, we created a CRISPR-Cas12a-based one-step HOLMES(NAD+) system for rapid and convenient NAD+ detection with the employment of both acetylated Cas12a and CobB. In HOLMES(NAD+), acetylated Cas12a loses its trans-cleavage activities and can be reactivated by CobB in the presence of NAD+, cutting ssDNA reporters to generate fluorescence signals. HOLMES(NAD+) shows both sensitivity and specificity in NAD+ detection and can be used for quantitative determination of intracellular NAD+ concentrations. Therefore, HOLMES(NAD+) not only provides a convenient and rapid approach for target NAD+ quantitation but also expands the application scenarios of HOLMES to non-nucleic acid detection.

A novel universal small-molecule detection platform based on antibody-controlled Cas12a switching

Molecular diagnostics play an important role in illness detection, prevention, and treatment, and are vital in point-of-care test. In this investigation, a novel CRISPR/Cas12a based small-molecule detection platform was developed using Antibody-Controlled Cas12a Biosensor (ACCBOR), in which antibody would control the trans-cleavage activity of CRISPR/Cas12a. In this system, small-molecule was labeled around the PAM sites of no target sequence(NTS), and antibody would bind on the labeled molecule to prevent the combination of CRISPR/Cas12a, resulting the decrease of trans-cleavage activity. Biotin-, digoxin-, 25-hydroxyvitamin D3 (25-OH-VD3)-labeled NTS and corresponding binding protein were separately used to verify its preformance, showing great universality. Finally, one-pot detection of 25-OH-VD3 was developed, exhibiting high sensitivity and excellent specificity. The limit of detection could be 259.86 pg/mL in serum within 30 min. This assay platform also has the advantages of low cost, easy operation (one-pot method), and fast detection (∼30 min), would be a new possibilities for the highly sensitive detection of other small-molecule targets.

Emerging programmable nuclease-based detection for food safety

Food safety issues are an important challenge across the world. Programmable nucleases are emerging as new tools because of their significant biological advantages. This forum article provides an overview of recent advances and challenges in the novel paradigm of programmable nuclease-based detection for food safety.

Programmable Aptasensor for Regulating CRISPR/Cas12a Activity

CRISPR-mediated aptasensors have gained prevalence for detecting non-nucleic acid targets. However, there is an urgent need to develop an easily customizable design to improve the signal-to-noise ratio, enhance universality, and expand the detection range. In this article, we report a CRISPR-mediated programmable aptasensor (CPAS) platform. The platform includes single-stranded DNA comprising the aptamer sequence, locker DNA, and a crRNA recognition region, forming a hairpin structure through complementary hybridization. With T4 DNA polymerase, the crRNA recognition region was transformed into a complete double-stranded DNA through stem-loop extension, thereby activating the trans-cleavage activity of Cas 12a and generating fluorescence signals. The specific binding between the target molecule and aptamer disrupted the formation of the hairpin structure, altering the fluorescence signals. Notably, the CPAS platform allows for easy customization by simply changing the aptamer sequence and locker DNA, without entailing adjustments to the crRNA. The optimal number of bases in the locker DNA was determined to be seven nucleotides for the SARS-CoV-2 spike (S) protein and four nucleotides for ATP. The CPAS platform exhibited high sensitivity for S protein and ATP detection. Integration with a lateral flow assay enabled sensitive detection within 1 h, revealing its excellent potential for portable analysis.

CRISPR/Cas12a and G-quadruplex DNAzyme-driven multimodal biosensor for visual detection of Aflatoxin B1

Aflatoxin B1 (AFB1) contamination severely threatens human and animal health, it is thus critical to construct a strategy for its rapid, accurate, and visual detection. Herein, a multimodal biosensor was proposed based on CRISPR/Cas12a cleaved G-quadruplex (G4) for AFB1 detection. Briefly, specific binding of AFB1 to the aptamer occupied the binding site of the complementary DNA (cDNA), and cDNA then activated Cas12a to cleave G4 into fragments. Meanwhile, the intact G4-DNAzyme could catalyze 3, 3', 5, 5'-tetramethylbenzidine (TMB) to form colourimetric/SERS/fluorescent signal-enhanced TMBox, and the yellow solution produced by TMBox under acidic conditions could be integrated with a smartphone application for visual detection. The colourimetric/SERS/fluorescent biosensor yielded detection limits of 0.85, 0.79, and 1.65 pg·mL-1, respectively, and was applied for detecting AFB1 in peanut, maize, and badam samples. The method is suitable for visual detection in naturally contaminated peanut samples and has prospective applications in the food industry.

Sensitive and Portable Signal Readout Strategies Boost Point-of-Care CRISPR/Cas12a Biosensors

Point-of-care (POC) detection is getting more and more attention in many fields due to its accuracy and on-site test property. The CRISPR/Cas12a system is endowed with excellent sensitivity, target identification specificity, and signal amplification ability in biosensing because of its unique trans-cleavage ability. As a result, a lot of research has been made to develop CRISPR/Cas12a-based biosensors. In this review, we focused on signal readout strategies and summarized recent sensitivity-improving strategies in fluorescence, colorimetric, and electrochemical signaling. Then we introduced novel portability-improving strategies based on lateral flow assays (LFAs), microfluidic chips, simplified instruments, and one-pot design. In the end, we also provide our outlook for the future development of CRISPR/Cas12a biosensors.

CRISPR/Cas System: The Accelerator for the Development of Non-nucleic Acid Target Detection in Food Safety

Non-nucleic acid targets have posed a serious challenge to food safety. The detection of non-nucleic acid targets can enable us to monitor food contamination in a timely manner. In recent years, the CRISPR/Cas system has been extensively explored in biosensing. However, there is a lack of a summary of CRISPR/Cas-powered detection tailored to non-nucleic acid targets involved in food safety. This review comprehensively summarizes the recent advances on the construction of CRISPR/Cas-powered detection and the promising applications in the field of food safety related non-nucleic acid targets. The current challenges and futuristic perspectives are also proposed accordingly. The rapidly evolving CRISPR/Cas system has provided a powerful propellant for non-nucleic acid target detection via integration with aptamer and/or DNAzyme. Compared with traditional analytical methods, CRISPR/Cas-powered detection is conceptually novel, essentially eliminates the dependence on large instruments, and also demonstrates the capability for rapid, accurate, sensitive, and on-site testing.

Simple and cheap CRISPR/Cas12a biosensor based on plug-and-play of DNA aptamers for the detection of endocrine-disrupting compounds

Endocrine-disrupting compounds (EDCs) are widely distributed in the environment. Here, we present a CRISPR/Cas12a (CAS) biosensor based on DNA aptamers for point-of-care detection of EDCs. Two typical EDCs, 17β-estradiol (E2) and bisphenol A (BPA), were selected to be detected by the CAS biosensors via the plug-and-play of their DNA aptamers. The results indicated that the performance of the CAS biosensors can be well regulated by controlling the trans-cleavage activity of Cas12a on a single-stranded DNA reporter and optimizing the sequence and ratio of DNA aptamer and activator DNA. Ultimately, two reliable and specific biosensors were developed, with the linear range and limit of detection of 0.2-25 nM and 0.08 nM for E2 and of 0.1-250 nM and 0.06 nM for BPA, respectively. Compared to the existing detection methods, the CAS biosensors showed higher reliability and sensitivity with simple operation, short detection time, and no costly equipment.

An amplification-free CRISPR/Cas12a-based fluorescence assay for ultrasensitive detection of nuclease activity

Nuclease, such as RNase H and DNase I, plays key roles in plenty of cellular processes and could be potential therapeutic target for drug development. It is necessary to establish rapid and simple-to-use methods to detect nuclease activity. Herein, we develop a Cas12a-based fluorescence assay without any nucleic acid amplification steps for ultrasensitive detection of RNase H or DNase I activity. By our design, the pre-assembled crRNA/ssDNA duplex triggered the cleavage of fluorescent probes in the presence of Cas12a enzymes. However, the crRNA/ssDNA duplex was selectively digested with the addition of RNase H or DNase I, which leaded to fluorescence intensity changes. Under optimized conditions, the method exhibited good analytical performance, achieving a limit of detection (LOD) as low as 0.0082 U/mL for RNase H and 0.13 U/mL for DNase I, respectively. The method was feasible for analysis of RNase H in human serum and cell lysates, as well as for screening of enzyme inhibitors. Moreover, it can be adopted to image RNase H activity in living cells. Together, this study provides a facile platform for nuclease detection and could be expanded for other biomedical research and clinical diagnostics.

Customization of aptamer to develop CRISPR/Cas12a-derived ultrasensitive biosensor

The CRISPR/Cas systems have provided wide biosensing applications. Particularly, the aptamer-involved CRISPR/Cas sensor system powerfully expanded to non-nucleic-acid targets. However, tailoring the sequence of the aptamer to explore the relationship between affinity and the activation of CRISPR/Cas12a trans-cleavage activity has not been reported yet. Herein, we developed a series of new aptamers toward the spike protein 1(S1) of SARS-CoV-2. Surface plasmon resonance measurements showed that the affinity of these aptamers to S1 was at the nM level. Subsequently, a "SET" effect (Sequence Essential Trans-cleavage activity) is discovered for the activation of CRISPR/Cas12a trans-cleavage activity. That is, an aptamer, as the activator, sequence needs to be tailored to activate CRISPR/Cas12a efficiently. A balance should be reached between affinity and activation ability. On the one hand, high affinity ensures target recognition performance, and on the other hand, activation can achieve adequate amplification and output of recognition signals. The optimized sequence (with 27 nucleotides, for short 27-nt) not only recognizes the target with a high affinity and specificity but also can trigger the CRISPR/Cas12a trans-cleavage activity efficiently, showing an excellent detection performance in electrochemical biosensors. The detection limit for SARS-CoV-2 S1 can be low at 1.5 pg mL^-1. The new CRISPR/Cas12a-derived aptasensor also displays a remarkable ability to detect Beta, Delta, and Omicron variants but is selective toward other kinds of proteins. Above all, it is robust for point-of-care testing (POCT) in complex biological fluids, such as saliva, urine, and serum, and provides a universal and scalable detecting platform. Our results provide new insights into aptamer development and a different strategy for COVID-19 antigen detection and biosensor development.

A universal CRISPR/Cas12a-powered intelligent point-of-care testing platform for multiple small molecules in the healthcare, environment, and food

Growing studies focusing on nuclear acid detection via the emerging CRISPR technique demonstrate its promising application. However, limited works solve the identification of non-nucleic acid targets, especially multiple small molecules. To address challenges for point-of-care testing (POCT) in complex matrices for healthcare, environment, and food safety, we developed CRISPR Cas12a-powered highly sensitive, high throughput, intelligent POCT (iPOCT) for multiple small molecules based on a smartphone-controlled reader. As a proof of concept, aflatoxin B1 (AFB1), benzo[a]pyrene (BaP), and capsaicin (CAP) were chosen as multiple targets. First, three antigens were preloaded in independent microwells. Then, the antibody/antigen-induced fluorescent signals were consecutively transferred from the biotin-streptavidin to CRISPR/Cas12a system. Third, the fluorescent signals were recorded by a smartphone-controlled handheld dark-box readout. Under optimization, detection limits in AFB1, BaP, and CAP were 0.00257, 4.971, and 794.6 fg/mL with wide linear ranges up to four orders of magnitude. Using urine, water, soybean oil, wheat, and peanuts as the complex matrix, we recorded high selectivity, considerable recovery, repeatability, and high consistency comparison to HPLC-MS/MS methods. This work promises a practical intelligent POCT platform for multiple targets in lipid-soluble and water-soluble matrices and could be extensively applied for healthcare, environment, and food safety.

CRISPR/Cas-based Aptasensor as an Innovative Sensing Approaches for Food Safety Analysis: Recent Progresses and New Horizons

Food safety is one of the greatest public problems occurring around the world. Chemical, physical, and microbiological hazards could lead to food safety problems, which might occur at all stages of the supply chain. To tackle food safety problems and protect consumer health, specific, accurate, and rapid diagnosis techniques meeting various requirements are the imperative measures to ensure food safety. CRISPR-Cas system, a novel emerging technology, is effectively repurposed in (bio)sensing and has shown a tremendous capability to develop on-site and portable diagnostic methods with high specificity and sensitivity. Among numerous existing CRISPR/Cas systems, CRISPR/Cas13a and CRISPR/Cas12a are extensively employed in the design of biosensors, owing to their ability to cleave both non-target and target sequences. However, the specificity limitation in CRISPR/Cas has hindered its progress. Nowadays, nucleic acid aptamers recognized for their specificity and high-affinity characteristics for their analytes are incorporated into CRISPR/Cas systems. With the benefits of reproducibility, high durability, portability, facile operation, and cost-effectiveness, CRISPR/Cas-based aptasensing approaches are an ideal choice for fabricating highly specific point-of-need analytical tools with enhanced response signals. In the current study, we explore some of the most recent progress in the CRISPR/Cas-mediated aptasensors for detecting food risk factors including veterinary drugs, pesticide residues, pathogens, mycotoxins, heavy metals, illegal additives, food additives, and other contaminants. The nanomaterial engineering support with CRISPR/Cas aptasensors is also signified to achieve a hopeful perspective to provide new straightforward test kits toward trace amounts of different contaminants encountered in food samples.

Aptamer-based CRISPR-Cas powered diagnostics of diverse biomarkers and small molecule targets

CRISPR-Cas systems have been widely used in genome editing and transcriptional regulation. Recently, CRISPR-Cas effectors are adopted for biosensor construction due to its adjustable properties, such as simplicity of design, easy operation, collateral cleavage activity, and high biocompatibility. Aptamers' excellent sensitivity, specificity, in vitro synthesis, base-pairing, labeling, modification, and programmability has made them an attractive molecular recognition element for inclusion in CRISPR-Cas systems. Here, we review current advances in aptamer-based CRISPR-Cas sensors. We briefly discuss aptamers and the knowledge of Cas effector proteins, crRNA, reporter probes, analytes, and applications of target-specific aptamers. Next, we provide fabrication strategies, molecular binding, and detection using fluorescence, electrochemical, colorimetric, nanomaterials, Rayleigh, and Raman scattering. The application of CRISPR-Cas systems in aptamer-based sensing of a wide range of biomarkers (disease and pathogens) and toxic contaminants is growing. This review provides an update and offers novel insights into developing CRISPR-Cas-based sensors using ssDNA aptamers with high efficiency and specificity for point-of-care setting diagnostics.

CRISPR-Cas systems mediated biosensing and applications in food safety detection

Food safety, closely related to economic development of food industry and public health, has become a global concern and gained increasing attention worldwide. Effective detection technology is of great importance to guarantee food safety. Although several classical detection methods have been developed, they have some limitations in portability, selectivity, and sensitivity. The emerging CRISPR-Cas systems, uniquely integrating target recognition specificity, signal transduction, and efficient signal amplification abilities, possess superior specificity and sensitivity, showing huge potential to address aforementioned challenges and develop next-generation techniques for food safety detection. In this review, we focus on recent progress of CRISPR-Cas mediated biosensing and their applications in food safety monitoring. The properties and principles of commonly used CRISPR-Cas systems are highlighted. Notably, the frequently coupled nucleic acid amplification strategies to enhance their selectivity and sensitivity, especially isothermal amplification methods, as well as various signal output modes are also systematically summarized. Meanwhile, the application of CRISPR-Cas systems-based biosensors in food safety detection including foodborne virus, foodborne bacteria, food fraud, genetically modified organisms (GMOs), toxins, heavy metal ions, antibiotic residues, and pesticide residues is comprehensively described. Furthermore, the current challenges and future prospects in this field are tentatively discussed.

CRISPR/Cas12a-based biosensing platform for the on-site detection of single-base mutants in gene-edited rice

At present, with the accelerated development of the global biotechnology industry, novel transgenic technologies represented by gene editing are developing rapidly. A large number of gene-edited products featuring one or a few base indels have been commercialized. These have led to great challenges in the use of traditional nucleic acid detection technology and in safety regulation for genetically modified organisms (GMOs). In this study, we developed a portable clustered regularly interspaced short palindromic repeats/CRISPR-associated proteins 12a-based (CRISPR/Cas12a-based) biosensing platform named Cas12aFVD (fast visual detection) that can be coupled with recombinase polymerase amplification (RPA) for on-site detection of mutants in gene-edited rice in one tube. The detection procedure can be accomplished in 40 min with a visible result, which can be observed by the naked eye under blue light (470-490 nm). By accurate recognition of targets based on Cas12a/CRISPR RNA (crRNA), Cas12aFVD exhibits excellent performance for the detection of two- and three-base deletions, one-base substitution, and one-base insertion mutants with a limit of detection (LOD) of 12 copies/μl showing great potential for mutant detection, especially single-base mutants. The Cas12aFVD biosensing platform is independent of laboratory conditions, making it a promising and pioneering platform for the detection of gene-edited products.

Two-step aggregation of gold nanoparticles based on charge neutralization for detection of melamine by colorimetric and surface-enhanced Raman spectroscopy platform

A colorimetric and surface-enhanced Raman scattering (SERS) signal amplification platform based on 2-step aggregation of gold nanoparticles (AuNP) was constructed for the sensitive detection of melamine. In this study, the positively charged SYBR Green I was used for the first step of aggregation of AuNP, via charge neutralization, to obtain small-sized AuNP aggregates. The positively charged SYBR Green I decreased the negative charges of the surface of AuNP, which was beneficial to the aggregation of AuNP. In addition, the melamine could aggregate AuNP by decreasing the negative charges of the surface of AuNP and self-assemble with each other on the surface of AuNP by hydrogen bonds. Therefore, the second efficient aggregation of small-sized AuNP aggregates could be achieved with melamine at low concentration, resulting in significant signal changes of color and SERS. The sensitivity of a colorimetric (0.60 mg/L) and SERS (0.089 mg/L) platform, based on 2-step aggregation of AuNP, was 15 and 2.2 times higher than that based on 1-step aggregation of AuNP for detecting melamine.

CRISPR-Cas-based detection for food safety problems: Current status, challenges, and opportunities

Food safety is one of the biggest public issues occurring around the world. Microbiological, chemical, and physical hazards can lead to food safety issues, which may occur at all stages of the supply chain. In order to tackle food safety issues and safeguard consumer health, rapid, accurate, specific, and field-deployable detection methods meeting diverse requirements are one of the imperative measures for food safety assurance. CRISPR-Cas system, a newly emerging technology, has been successfully repurposed in biosensing and has demonstrated huge potential to establish conceptually novel detection methods with high sensitivity and specificity. This review focuses on CRISPR-Cas-based detection and its current status and huge potential specifically for food safety inspection. We firstly illustrate the pending problems in food safety and summarize the popular detection methods. We then describe the potential applications of CRISPR-Cas-based detection in food safety inspection. Finally, the challenges and futuristic opportunities are proposed and discussed. Generally speaking, the current food safety detection methods are still unsatisfactory in some ways such as being time-consuming, displaying unmet sensitivity and specificity standards, and there is a comparative paucity of multiplexed testing and POCT. Recent studies have shown that CRISPR-Cas-based biosensing is an innovative and fast-expanding technology, which could make up for the shortcomings of the existing methods or even replace them. To sum up, the implementation of CRISPR-Cas and the integration of CRISPR-Cas with other techniques is promising and desirable, which is expected to provide "customized" and "smart" detection methods for food safety inspection in the coming future.

Rational design of an allosteric G-quadruplex aptamer probe for ultra-sensitive detection of melamine in milk

Efficient and accurate detection of melamine in dairy products remains a crucial yet challenging task. Herein, an allosterically modulated G-quadruplex-integrated aptamer is rationally designed with thymine-rich recognition termini for melamine binding. The detection process is facile by simply introducing the analyte into the mixture consisting of G-quadruplex aptamer probes, exonuclease III, and thioflavin T (ThT). The detection feasibility is confirmed by the polyacrylamide gel electrophoresis and fluorescence measurement results. This exonuclease III-assisted signal amplifiable approach works well in a linear range from 0.1 nM to 0.1 μM. Moreover, a detection limit as low as 83 pM is easily achieved, which is almost five orders of magnitude smaller than the maximum allowable melamine levels (about 8 μM) defined by many countries all over the world. The whole assay time for each test is no longer than 1 h. Additionally, the scheme is highly specific and satisfactory recovery rates (from 91% to 104%) are readily obtained when challenged with melamine-spiked milk samples. Therefore, the label-free, turn-on, low-cost, and time-efficient method can be used for reliable detection of melamine in an easily manipulated and ultra-sensitive manner, which may find its utilization in the field of food safety, biomedical engineering, and clinical diagnosis.

Recent advances in CRISPR-based systems for the detection of foodborne pathogens

There has long been a need for more advanced forms of pathogen detection in the food industry. Though in its infancy, biosensing based on clustered regularly interspaced short palindromic repeats (CRISPR) has the potential to solve many problems that cannot be addressed using conventional methods. In this review, we briefly introduce and classify the various CRISPR/Cas protein effectors that have thus far been used in biosensors. We then assess the current state of CRISPR technology in food-safety contexts; describe how each Cas effector is utilized in foodborne-pathogen detection; and discuss the limitations of the current technology, as well as how it might usefully be applied in other areas of the food industry. We conclude that, if the limitations of existing CRISPR/Cas-based detection methods are overcome, they can be deployed on a wide scale and produce a range of positive food-safety outcomes.

CRISPR/Cas12a-based technology: A powerful tool for biosensing in food safety

BACKGROUND

In the context of the current pandemic caused by the novel coronavirus, molecular detection is not limited to the clinical laboratory, but also faces the challenge of the complex and variable real-time detection fields. A series of novel coronavirus events were detected in the process of food cold chain packaging and transportation, making the application of molecular diagnosis in food processing, packaging, transportation, and other links urgent. There is an urgent need for a rapid detection technology that can adapt to the diversity and complexity of food safety.

SCOPE AND APPROACH

This review introduces a new molecular diagnostic technology-biosensor analysis technology based on CRISPR-Cas12a. Systematic clarification of its development process and detection principles. It summarizes and systematically organizes its applications in viruses, food-borne pathogenic bacteria, small molecule detection, etc. In the past four years, which provides a brand-new and comprehensive solution for food detection. Finally, this article puts forward the challenges and the prospects for food safety.

KEY FINDINGS AND CONCLUSIONS

The novel coronavirus hazards infiltrated every step of the food industry, from processing to packaging to transportation. The biosensor analytical technology based on CRISPR-Cas12a has great potential in the qualitative and quantitative analysis of infectious pathogens. CRISPR-Cas12a can effectively identify the presence of the specific nucleic acid targets and the small changes in sequences, which is particularly important for nucleic acid identification and pathogen detection. In addition, the CRISPR-Cas12a method can be adjusted and reconfigured within days to detect other viruses, providing equipment for nucleic acid diagnostics in the field of food safety. The future work will focus on the development of portable microfluidic devices for multiple detection. Shao et al. employed physical separation methods to separate Cas proteins in different microfluidic channels to achieve multiple detection, and each channel simultaneously detected different targets by adding crRNA with different spacer sequences. Although CRISPR-Cas12a technology has outstanding advantages in detection, there are several technical barriers in the transformation from emerging technologies to practical applications. The newly developed CRISPR-Cas12a-based applications and methods promote the development of numerous diagnostic and detection solutions, and have great potential in medical diagnosis, environmental monitoring, and especially food detection.

The creation of selective imprinted cavities on quartz crystal microbalance electrode for the detection of melamine in milk sample

Molecularly imprinted polymer based nanofilms specific to melamine were synthesized on quartz crystal microbalance (QCM) electrode surface. Contact angle measurements, atomic force microscopy, ellipsometry and scanning electron microscopy were used for characterizations process. Some of the findings of the study are as follows: pH 6.0 was found as optimal working pH for melamine detection. Prepared MIP QCM electrode showed a linearity of 99.53% in the concentration range of 50-1000 ng/mL. Langmuir-Freundlich hybrid model was the best fitted isotherm for whole concentration range. The performance of MIP QCM electrode was also confirmed by determining of melamine in melamine spiked milk samples. As a conclusion, the results figured out that not only QCM nanosensor for specific melamine detection but also polymerization strategy were classified as an intriguing alternative for developing new melamine sensing platforms. Limit of detection (LOD) and limit of quantification (LOQ) were calculated as 2.3 ng/mL and 7.8 ng/mL, respectively.

Powerful CRISPR-Based Biosensing Techniques and Their Integration With Microfluidic Platforms

In the fight against the worldwide pandemic coronavirus disease 2019 (COVID-19), simple, rapid, and sensitive tools for nucleic acid detection are in urgent need. PCR has been a classic method for nucleic acid detection with high sensitivity and specificity. However, this method still has essential limitations due to the dependence on thermal cycling, which requires costly equipment, professional technicians, and long turnover times. Currently, clustered regularly interspaced short palindromic repeats (CRISPR)-based biosensors have been developed as powerful tools for nucleic acid detection. Moreover, the CRISPR method can be performed at physiological temperature, meaning that it is easy to assemble into point-of-care devices. Microfluidic chips hold promises to integrate sample processing and analysis on a chip, reducing the consumption of sample and reagent and increasing the detection throughput. This review provides an overview of recent advances in the development of CRISPR-based biosensing techniques and their perfect combination with microfluidic platforms. New opportunities and challenges for the improvement of specificity and efficiency signal amplification are outlined. Furthermore, their various applications in healthcare, animal husbandry, agriculture, and forestry are discussed.

Rapid and accurate detection of SARS-CoV-2 mutations using a Cas12a-based sensing platform

The increasing prevalence of SARS-CoV-2 variants with spike mutations has raised concerns owing to higher transmission rates, disease severity, and escape from neutralizing antibodies. Rapid and accurate detection of SARS-CoV-2 variants provides crucial information concerning the outbreaks of SARS-CoV-2 variants and possible lines of transmission. This information is vital for infection prevention and control. We used a Cas12a-based RT-PCR combined with CRISPR on-site rapid detection system (RT-CORDS) platform to detect the key mutations in SARS-CoV-2 variants, such as 69/70 deletion, N501Y, and D614G. We used type-specific CRISPR RNAs (crRNAs) to identify wild-type (crRNA-W) and mutant (crRNA-M) sequences of SARS-CoV-2. We successfully differentiated mutant variants from wild-type SARS-CoV-2 with a sensitivity of 10⁻¹⁷ M (approximately 6 copies/μL). The assay took just 10 min with the Cas12a/crRNA reaction after a simple RT-PCR using a fluorescence reporting system. In addition, a sensitivity of 10⁻¹⁶ M could be achieved when lateral flow strips were used as readouts. The accuracy of RT-CORDS for SARS-CoV-2 variant detection was 100% consistent with the sequencing data. In conclusion, using the RT-CORDS platform, we accurately, sensitively, specifically, and rapidly detected SARS-CoV-2 variants. This method may be used in clinical diagnosis.

Dual-Enzyme-Based Signal-Amplified Aptasensor for Zearalenone Detection by Using CRISPR-Cas12a and Nt.AlwI

Zearalenone (ZEN) is harmful to animals and human beings, so it is very important to develop a rapid and sensitive method for the detection of ZEN. In this paper, we proposed a novel ZEN-monitoring method using two aptamers as recognition elements and EnGen LbaCas12a and Nt.AlwI nicking endonuclease as signal amplifiers. When ZEN was present, it bound to the aptamer Z0 and, Z1 was released into solution. The solution was then separated and the Nt.AlwI enzyme was added in order to form a nicking-enzyme cycle, thereby producing large amounts of the ssDNA Z3 for 30 min. The Z3 formed a CRISPR-Cas12a-Z3 complex with CRISPR-Cas12a, activated the trans-cleavage ability of Cas12a, cleaved the Quenched Reporter for 20 min, and underwent fluorescence recovery. The aptasensor was able to sensitively detect ZEN in the linear range of 1–1000 pg/mL, with a detection limit as low as 0.213 pg/mL. The detection time lasted for 2 h. Additionally, this detection technology can also be used to monitor other hazards.

Integrating PCR-free amplification and synergistic sensing for ultrasensitive and rapid CRISPR/Cas12a-based SARS-CoV-2 antigen detection

Antigen detection provides particularly valuable information for medical diagnoses; however, the current detection methods are less sensitive and accurate than nucleic acid analysis. The combination of CRISPR/Cas12a and aptamers provides a new detection paradigm, but sensitive sensing and stable amplification in antigen detection remain challenging. Here, we present a PCR-free multiple trigger dsDNA tandem-based signal amplification strategy and a de novo designed dual aptamer synergistic sensing strategy. Integration of these two strategies endowed the CRISPR/Cas12a and aptamer-based method with ultra-sensitive, fast, and stable antigen detection. In a demonstration of this method, the limit of detection was at the single virus level (0.17 fM, approximately two copies/μL) in SARS-CoV-2 antigen nucleocapsid protein analysis of saliva or serum samples. The entire procedure required only 20 min. Given our system's simplicity and modular setup, we believe that it could be adapted reasonably easily for general applications in CRISPR/Cas12a-aptamer-based detection.