Oligo-layer graphene stabilized fully exposed Fe-sites for ultra-sensitivity electrochemical detection of dopamine

Tailoring phases of ferrihydrite/α-Fe2O3@C nanocomposites using syringyl and guaiacyl-rich biomass-derived carbon nanodots for electrochemical application

Biomass-derived carbon nanodots (CNDs) hold promise as effective reducing agents for metal oxide nanoparticles yet understanding the intricate interplay with CND structure remains challenging. This study explores the impact of lignin types, specifically syringyl (S), and guaiacyl (G) units in CNDs on metal oxide phases and their electrochemical activity toward dopamine oxidation. We design phases of ferrihydrite/α-Fe2O3@C nanocomposites, using hazelnut carbon nanodots (HS-CNDs (S-rich)) and beetroot carbon nanodots (BS-CNDs (G-rich)) via a one-pot hydrothermal technique. Our findings show S units in HS-CNDs promote α-FeOOH/α-Fe2O3@CHS, while G units in BS-CNDs favor α (β)-FeOOH/α-Fe2O3@CBS. In contrast to α(β)-FeOOH/α-Fe2O3@CBS, α-FeOOH/α-Fe2O3@CHS exhibits superior electrochemical performance in dopamine oxidation due to its larger electrochemical active surface area, higher absorbance capacity, and shortened electron transfer length. Moreover, α-FeOOH/α-Fe2O3@CHS nanocomposites demonstrate remarkable dopamine selectivity, achieving rapid detection response in 10 s with a low LOD of 4 nM within a broad linear range (0.05-0.3 μM), demonstrating impressive reproducibility (97.5 %), stability (96.4 %), and works in real-time human urine detection with a recovery rate of ranging from 94.57 % and 102.2 %. Therefore, the utilization of biomass-derived CNDs, particularly S and G units-rich CNDs, in tailoring the phases of ferrihydrite/α-Fe2O3@C nanocomposites for electrochemical dopamine detection is promising.

Multiplexed neurochemical sensing with sub-nM sensitivity across 2.25 mm2 area

Multichannel arrays capable of real-time sensing of neuromodulators in the brain are crucial for gaining insights into new aspects of neural communication. However, measuring neurochemicals, such as dopamine, at low concentrations over large areas has proven challenging. In this research, we demonstrate a novel approach that leverages the scalability and processing power offered by microelectrode array devices integrated with a functionalized, high-density microwire bundle, enabling electrochemical sensing at an unprecedented scale and spatial resolution. The sensors demonstrate outstanding selective molecular recognition by incorporating a selective polymeric membrane. By combining cutting-edge commercial multiplexing, digitization, and data acquisition hardware with a bio-compatible and highly sensitive neurochemical interface array, we establish a powerful platform for neurochemical analysis. This multichannel array has been successfully utilized in vitro and ex vivo systems. Notably, our results show a sensing area of 2.25 mm2 with an impressive detection limit of 820 pM for dopamine. This new approach paves the way for investigating complex neurochemical processes and holds promise for advancing our understanding of brain function and neurological disorders.

Photo-electrochemical sensor based on BiOI/ZnIn2S4 heterojunction for detecting hydrogen peroxide and dopamine

Photoelectrochemical (PEC) detection as a potential development strategy for hydrogen peroxide and dopamine sensors has received extensive attentions. Herein, BiOI/ZnIn2S4-X (X = n (BiOI)/n(ZnIn2S4)) heterojunction was synthesized using various molar ratios via a two-step method. A series of characterization techniques were employed to analyze the composition, surface structure, valence state, and optical properties of BiOI/ZnIn2S4-X. The results show that BiOI/ZnIn2S4-X perform significantly better than both BiOI and ZnIn2S4. Furthermore, BiOI/ZnIn2S4-9% exhibits superior visible light absorption capacity and photocurrent response among all of the BiOI/ZnIn2S4-X tested. Therefore, a PEC sensor was developed using BiOI/ZnIn2S4-9% for the detection of hydrogen peroxide and dopamine. The linear detection range for hydrogen peroxide spans from to 1 ~ 40,000 µM, with the LOD of 0.036 µM (S/N = 3). For dopamine, the corresponding values are 2 ~ 250 µM for the linear detection range, and 0.017 μM for the LOD, respectively. The sensor exhibits demonstrates excellent stability, reproducibility and resistance to interference, enabling the detection of real samples and thus holds promising application potential.

Magnetic MOF composites for the electrocatalysis and biosensing of dopamine released from living cells

Metal-organic frameworks (MOFs) with fit ligands and metals can be integrated into electrochemical biosensors for the detection of various biomolecules. In this study, we have synthesized novel magnetic MOF composites as electrocatalysts and constructed a novel biosensor for electrochemical detection of dopamine. The composites named Fe3O4@ZIF-8@AuNPs-COOH are synthesized through layer-by-layer assembly. They exhibit excellent stability and cooperative catalytic activity. In addition, green recycling is readily achieved through magnetizing/demagnetizing the electrode. The large specific surface area and ordered porous structures of the magnetic MOFs ensure good dispersion of gold nanoparticles, while the carboxyl group efficiently shields other redox-active interfering substances. The proposed electrochemical biosensor accomplishes the sensitive detection of dopamine in human serums and living cells. This study broadens the application of MOFs in electrochemical biosensing, validates the feasibility of biosensors for in vivo analysis, and provides new insights into green sensing.

3D Porous Graphene Architecture Integrated with Cu2O for Enhanced Electrochemical Sensing Performance

Construction and functionalization of a 3D graphene architecture are crucial to harness and extend the unique features of graphene and thus essential for its numerous conventional and novel applications. Herein, a 3D honeycomb-patterned porous graphene architecture is constructed through a facile and low-cost self-assembly process and then integrated with Cu2O nanoparticles via a simple electrodeposition procedure. The 3D porous graphene structure is prepared by the breath figure method using a graphene oxide (GO)-based complex in which GO is modified by a surfactant as the casting material. Benefiting from the intercalation of the surfactant between the GO nanosheets and the fabrication of a 3D porous structure, the aggregation inhibition of GO nanosheets and increases in accessible surface area are realized at both nano- and microscales, resulting in good electrochemical performance. Moreover, the deposition of Cu2O nanoparticles can further improve the electrochemical sensing performance of the porous reduced graphene oxide (rGO) structure. Extremely low detection limit (30.72 nM) with a linear range of 0 μM to 30 μM, excellent anti-interference, repeatability, reproducibility, stability, and high accuracy for actual sample testing are shown when the 3D porous Cu2O/rGO film is applied as an electrochemical sensor for DA detection. This work provides not only a superior electrochemical biosensor but also a simple, yet effective and general strategy for the construction and functionalization of a 3D graphene structure.

A Dopamine Detection Sensor Based on Au-Decorated NiS2 and Its Medical Application

This article reports a simple hydrothermal method for synthesizing nickel disulfide (NiS2) on the surface of fluorine-doped tin oxide (FTO) glass, followed by the deposition of 5 nm Au nanoparticles on the electrode surface by physical vapor deposition. This process ensures the uniform distribution of Au nanoparticles on the NiS2 surface to enhance its conductivity. Finally, an Au@NiS2-FTO electrochemical biosensor is obtained for the detection of dopamine (DA). The composite material is characterized using transmission electron microscopy (TEM), UV-Vis spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The electrochemical properties of the sensor are investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and time current curves in a 0.1 M PBS solution (pH = 7.3). In the detection of DA, Au@NiS2-FTO exhibits a wide linear detection range (0.1~1000 μM), low detection limit (1 nM), and fast response time (0.1 s). After the addition of interfering substances, such as glucose, L-ascorbic acid, uric acid, CaCl2, NaCl, and KCl, the electrode potential remains relatively unchanged, demonstrating its strong anti-interference capability. It also demonstrates strong sensitivity and reproducibility. The obtained Au@NiS2-FTO provides a simple and easy-to-operate example for constructing nanometer catalysts with enzyme-like properties. These results provide a promising method utilizing Au coating to enhance the conductivity of transition metal sulfides.

Hierarchical CoWO4/NixFeyS microspheres bearing crystalline-amorphous interface as a multifunctional platform for outperformed water splitting and sensitive hydrazine sensing

Highly efficient and multifunctional electrocatalysts are of high value in energy transformation and electrochemical sensing. Herein, hierarchically architectured cobalt tungstate/nickel iron sulfide (CoWO4/NixFeyS) microspheres with a crystalline-amorphous interface have been prepared on bimetallic substrate of nickel-iron foam (NIF) by a two-step hydrothermal method. Electrochemical characterization shows that CoWO4/NixFeyS microspheres can boost the electrocatalytic activity effectively through the synergistic effect on the crystalline-amorphous interface. When the CoWO4/NixFeyS is applied as the electrocatalysts for oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER), the overpotentials at a high current density of 500 mA cm-2 are only 322.8 mV and 306.5 mV, respectively. The overall water splitting device composed of CoWO4/NixFeyS/NIF couple only needs a cell voltage of 1.80 V to reach a current density of 100 mA cm-2, and 2.19 V to reach 500 mA cm-2. The CoWO4/NixFeyS/NIF can be also utilized as an effective electrochemical platform for the sensing of toxic hydrazine in a wide range from 50 μM to 17.3 mM, with a detection limit of 46.4 μM. All these results display that the CoWO4/NixFeyS/NIF can be a high-performance multifunctional material for energy transformation and environmental pollutant monitoring.

Alkaline liquid-derived NaxTi11.5MoVOx/C-40 material with controlled electron transfer rate for sensitive electrochemical detection of dopamine

The neurotransmitter dopamine (DA) is associated with many physiological and pathological processes, so the importance of low detection limits and high sensitivity analysis cannot be overstated, especially for early disease detection. Here, 2 M NaOH aqueous solution is used to precipitate metal ions in an ethanol solution containing carbon black (CB), and then nanocomposite catalysts (NaxTi11.5MoVOx/C-40 (40 denoted as 40 mg CB)) were obtained by calcining the precipitation. When used for DA detection, NaxVOx acts as the main active site for electrochemical oxidation of DA and NaxTi11.5MoOx plays a role in facilitating the binding of DA to the active site and stabilizing the active site. The NaxTi11.5MoVOx/C-40 electrochemical biosensor has a limit of detection (LOD) of 0.003 μM with a linear range of 0.005-51.665 μM for DA. This sensor can be used to sensitively identify the concentration of DA in human blood and urine. Catalysts containing varying amounts of CB exhibit diverse electron transfer rates, and surprisingly, we found that the appropriate electron transfer rate is optimal for the detection of low concentrations of DA. Because the performance of the electrochemical biosensors is affected by both the activity of the catalysts and the accuracy of the electrochemical testing instrumentation. To better explain this phenomenon, we propose the concept of resolution (Rn) and present the formula to derive it, offering a new approach to evaluating the performance of electrochemical biosensors.

Ultrasensitive electrochemical sensing of catechol and hydroquinone via single-atom nanozyme anchored on MOF-derived porous carbon

Single-atom nanozymes (SANs) can significantly enhance the sensitivity and selectivity of electrochemical sensing platforms due to the homogeneity of their active sites, full atom utilization, and high catalytic activity. In this study, we demonstrate the synthesis and characterization of a high-density Co-based single-atom nanozyme anchored on activated MOF-derived porous carbon (Co-AcNC-3) via a cascade anchoring strategy for ultrasensitive, simultaneous electrochemical detection of catechol (CC) and hydroquinone (HQ). The Co-AcNC-3 displays a large specific surface area, high defectivity, and abundant oxygen-containing groups, with Co atoms being atomically dispersed throughout the carbon support via Co-N bonds. The Co-AcNC-3 biosensor exhibits superior electrochemical signals for CC and HQ, with linear ranges of 4.0 μM-300.0 μM. and detection limits of 0.072 μM and 0.034 μM, respectively. Moreover, the Co-AcNC-3 biosensor has shown excellent performance in accurately detecting CC and HQ in actual samples. Our findings highlight the potential of the proposed Co-AcNC-3 biosensor as a reliable and promising sensing platform for determining CC and HQ.

Nanobioengineered surface comprising carbon based materials for advanced biosensing and biomedical application

Carbon-based nanomaterials (CNMs) are at the cutting edge of materials science. Due to their distinctive architectures, substantial surface area, favourable biocompatibility, and reactivity to internal and/or external chemico-physical stimuli, carbon-based nanomaterials are becoming more and more significant in a wide range of applications. Numerous research has been conducted and still is going on to investigate the potential uses of carbon-based hybrid materials for diverse applications such as biosensing, bioimaging, smart drug delivery with the potential for theranostic or combinatorial therapies etc. This review is mainly focused on the classifications and synthesis of various types of CNMs and their electroanalytical application for development of efficient and ultra-sensitive electrochemical biosensors for the point of care diagnosis of fatal and severe diseases at their very initial stage. This review is mainly focused on the classification, synthesis and application of carbon-based material for biosensing applications. The integration of various types of CNMs with nanomaterials, enzymes, redox mediators and biomarkers have been used discussed in development of smart biosensing platform. We have also made an effort to discuss the future prospects for these CNMs in the biosensing area as well as the most recent advancements and applications which will be quite useful for the researchers working across the globe working specially in biosensors field.

Biomass-derived 2D carbon materials: structure, fabrication, and application in electrochemical sensors

Biomass, a renewable hydrocarbon, is one of the favorable sources of advanced carbon materials owing to its abundant resources and diverse molecular structures. Biomass-based two-dimensional carbon nanomaterials (2D-BC) have attracted extensive attention due to their tunable structures and properties, and have been widely used in the design and fabrication of electrochemical sensing platforms. This review embarks on the thermal conversion process of biomass from different sources and the synthesis strategy of 2D-BC materials. The affinity between 2D-BC structure and properties is emphasized. The recent progress in 2D-BC-based electrochemical sensors for health and environmental monitoring is also presented. Finally, the challenges and future development directions related to such materials are proposed in order to promote their further application in the field of electrochemical sensing.

Cell viability and drug evaluation biosensing system based on disposable AuNPs/MWCNT nanocomposite modified screen-printed electrode for exocytosis dopamine detection

Cell viability, as an important index to evaluate drug effects, usually was measured by tetrazolium colorimetric assay, playing a key role in drug development and drug screening. Tedious operating procedures, unsatisfactory sensitivity and abominable environments perplex researchers to acquire more detailed in vivo-relevant biological information. Herein, a simple and low-cost cell viability and drug evaluation biosensing system-based on multiwalled carbon nanotubes, gold nanoparticles and Nafion modified screen-printed electrode (SPE) biosensor was constructed for detection of dopamine (DA) released from living cells to evaluate cytotoxicity of antineoplastic drugs such as cisplatin and resveratrol. The biosensing system was demonstrated to display exceptional selectivity, excellent flexibility and good stability toward DA measurement in complex bio-samples. Additionally, the satisfactory recoveries of DA in real samples revealed the reliability and accuracy of the biosensing system in practical application. The IC₅₀ curves respectively obtained by the biosensing system and tetrazolium colorimetric assay provided similar IC₅₀ value but distinctly different dose-effect relationship, which confirmed the enormous potential of the biosensor in cell viability and described drug efficacy profiles in cell function. In short, the cell viability and drug evaluation system using SPE biosensor paves a new way in drug screening and pharmaceutical application to measure bioactive molecule such as DA.

Highly sensitive and selective serotonin (5-HT) electrochemical sensor based on ultrafine Fe3O4 nanoparticles anchored on carbon spheres

Neurotransmitter serotonin (5-HT) is involved in various physiological and pathological processes. Therefore, its highly sensitive and selective detection in human serum is of great significance for early diagnosis of disease. In this work, employing iron phthalocyanine as Fe source, ultrafine Fe₃O₄ nanoparticles anchored on carbon spheres (Fe₃O₄/CSs) have been prepared, which exhibits an excellent electrochemical sensing performance toward 5-HT. With carbonecous spheres turned into conductive carbon spheres under the heat treatment in N₂ atmosphere, iron phthalocyanine absorbed on their surfaces are simultaneously pyrolysised and oxidized, and finally transformed into ultrafine Fe₃O₄ nanoparticles. Electrochemical results demonstrate a high sensitivity (5.503 μA μM^-1) and a low detection limit (4 nM) toward 5-HT for as-prepared Fe₃O₄/CSs. In combination with the morphology and physicochemical property of Fe₃O₄/CSs, the enhanced sensing mechanism toward 5-HT is disscussed. In addition, the developed electrochemical sensor also displays a good sensing stability and an anti-interferent ability. Further applied in real human serum samples, a satisfactory recovery rate is achieved. Promisingly, the developed electrochemical sensor can be employed for the determination of 5-HT in actual samples.

A novel photoelectrochemical microfluidic chip for multi-index determination of diabetes and its complications

Rapid and accurate monitoring of glucose, lactic acid, pyruvic acid, and 3-hydroxybutyric acid is essential in preventing, diagnosing, and treating diabetes, lactic acidosis and diabetic ketoacidosis. Herein, a novel sensing chip for multi-index determination of diabetes, lactic acidosis, and diabetic ketoacidosis was presented by integrating microfluidic device and photoelectrochemical (PEC) sensor. In order to block the interference from the reductive species in real samples, the PEC sensor was divided into a biocathode and a photoanode, which were installed separately in the upper and bottom layers of the device. The photoanodes were modified with ZnIn₂S₄ nanoflower as photosensitive material, while enzymes for catalyzing the analytes were immobilized on the biocathodes. The PEC chip displayed wide detection ranges with low detection limits of 0.035 μM, 0.34 μM, 3.3 μM and 0.035 μM for the four analytes (S/N = 3). The chip also demonstrated decent anti-interference capability and reliability in monitoring the four biomarkers in human serum. Furthermore, a household amperemeter was deployed to record the photocurrent signals, which helps to reduce the cost. By replacing the enzyme on the biocathode, the sensing chip could play a role in monitoring a broad range of species.