Advances in aerobic granule formation and granule stability in the course of storage and reactor operation

Innovation for continuous aerobic granular sludge process in actual municipal sewage treatment: Self-circulating up-flow fluidized bed process

Aerobic granular sludge (AGS) capable of nitrogen and phosphorus removal is mainly limited to the applications in sequencing batch reactors. This study introduced an innovative continuous self-circulating up-flow fluidized bed process (Zier process) using separate aeration. The process was composed of an anoxic column (Zier-A), aeration column (Zier-OO) and aerobic column (Zier-O), and was used to treat actual municipal sewage continuously for 170 days. The process achieved self-circulation of 20-32 times and an up-flow velocity within the reactor of 7-16 m/h which were accurately controlled with only separate aeration. The larger proportion of self-circulating multiple times contributed to particle formation and stability, providing hydraulic shear conditions, and screened the precipitation performance of the granular sludge (GS). Meanwhile, the dissolved oxygen (DO) of Zier-O was controlled at 0.1-0.3 mg/L, and the DO of Zier-A input water was zero. The accurate oxygen supply enhanced simultaneous nitrification and denitrification (SND) as well as short-cut nitrification and denitrification in Zier-O and improved the COD utilization rate and the nitrogen removal rate in Zier-A. The COD treatment capacity reached 2.46 kg-COD/(m³·d). With a hydraulic retention time of 10 h, the process consistently ensured that the average concentrations of ammonia nitrogen and total nitrogen in the effluent were maintained below 5 and 15 mg/L, respectively. Moreover, the process maintained the shape and stability of GS, the median diameter of GS ranged between 300-1210 μm, the percentage of mass with particle size distribution < 200 μm at a height of 150 cm within Zier-A and Zier-O accounted for as low as 0.04%-0.05%, and showed good settling performance. The suspended solids in effluent can be maintained at 50-80 mg/L. Overall, the unique structural setting and control method of the Zier process provide another approach for the application of continuous AGS treatment for municipal sewage.

Reduction of greenhouse gas emissions from closed activated sludge- to aerobic granular sludge-based biosystems via gas circulation

Greenhouse gas (GHG) emissions from biological treatment units are challenging wastewater treatment plants (WWTPs) due to their wide applications and global warming. This study aimed to reduce GHG emissions (especially N2O) using a gas circulation strategy in a closed sequencing-batch reactor when the biological unit varies from activated sludge (AS) to aerobic granular sludge (AGS). Results show that gas circulation lowers pH to 6.3 ± 0.2, facilitating regular granules but elevating total N2O production. From AS to AGS, N2O emission factor increased (0.07-0.86 %) due to decreasing ammonia-oxidizing rates while the emissions of CO2 (0.3 ± 0.1 kg-CO2/kg-chemical oxygen demand) and CH4 remained in the closed biosystem. The gas circulation decreased N2O emission factor by 63 ± 15 % after granulation higher than 44 ± 34 % before granulation, which is implemented by heterotrophic denitrification. This study provides a feasible strategy to enhance heterotrophic N2O elimination in the biological WWTPs.

An overview of quorum sensing in shaping activated sludge forms: Mechanisms, applications and challenges

Activated sludge method is an effective method for the wastewater treatment and has been widely applied. Activated sludge usually exists in various forms such as activated sludge floc, biofilm and granule. Due to the different character and function for each sludge type, the role and mechanism in the wastewater treatment process are also different, but all were crucial. The quorum sensing (QS) /quorum quenching (QQ) have been demonstrated and proved to regulate the group behavior by secreting signaling molecules among microorganisms and thus affect the manifestation of sludge. However, the complex mechanisms and regulatory strategies of QS/QQ in sludge forms have not been systematically summarized. This review provided an overview on the mechanism of QS/QQ shaping sludge forms from macro to micro (Explore it through signaling molecules, extracellular polymeric substances and microorganisms). In addition, the application and challenges of QS/QQ regulating sludge forms in various wastewater treatment processes including biofilm batch reactor, granule sludge and membrane bioreactor were discussed. Finally, some suggestions for further research and development of effective and economical QS/QQ strategies are put forward.

Unveiling the role of ferrous ion in driving microalgae granulation from salt-tolerant strains for mariculture wastewater treatment

Development of microalgal-bacterial granular sludge (MBGS) from saline-adapted microalgae is a promising approach for efficient mariculture wastewater treatment, whereas the elusive mechanisms governing granulation have impeded its widespread adoption. In this study, spherical and regular MBGS were successfully developed from mixed culture of pure Spirulina platensis and Chlorella sp. GY-H4 at 10 mg/L Fe2+ concentration. The addition of Fe2+ was proven to induce the formation of Fe-precipitates which served as nucleation sites for microbial attachment and granulation initiation. Additionally, Fe2+ increased the prevalence of exopolysaccharide-producing cyanobacteria, i.e. Synechocystis and Leptolyngbya, facilitating microbial cell adhesion. Furthermore, it stimulated the secretion of extracellular proteins (particularly tryptophan and aromatic proteins), which acted as structural backbone for the development of spherical granule form microalgal flocs. Lastly, it fostered the accumulation of exogenous heterotrophic functional genera, resulting in the efficient removal of DOC (98 %), PO43--P (98 %) and NH4+-N (87 %). Nevertheless, inadequate Fe2+ hindered microalgal floc transformation into granules, excessive Fe2+ expanded the anaerobic zone within the granules, almost halved protein content in the TB-EPS, and inhibited the functional genes expression, ultimately leading to an irregular granular morphology and diminished nutrient removal. This research provides valuable insights into the mechanisms by which Fe2+ promotes the granulation of salt-tolerant microalgae, offering guidance for the establishment and stable operation of MBGS systems in mariculture wastewater treatment.

Unifying concepts in methanogenic, aerobic, and anammox sludge granulation

The retention of dense and well-functioning microbial biomass is crucial for effective pollutant removal in several biological wastewater treatment technologies. High solids retention is often achieved through aggregation of microbial communities into dense, spherical aggregates known as granules, which were initially discovered in the 1980s. These granules have since been widely applied in upflow anaerobic digesters for waste-to-energy conversions. Furthermore, granular biomass has been applied in aerobic wastewater treatment and anaerobic ammonium oxidation (anammox) technologies. The mechanisms underpinning the formation of methanogenic, aerobic, and anammox granules are the subject of ongoing research. Although each granule type has been extensively studied in isolation, there has been a lack of comparative studies among these granulation processes. It is likely that there are some unifying concepts that are shared by all three sludge types. Identifying these unifying concepts could allow a unified theory of granulation to be formed. Here, we review the granulation mechanisms of methanogenic, aerobic, and anammox granular sludge, highlighting several common concepts, such as the role of extracellular polymeric substances, cations, and operational parameters like upflow velocity and shear force. We have then identified some unique features of each granule type, such as different internal structures, microbial compositions, and quorum sensing systems. Finally, we propose that future research should prioritize aspects of microbial ecology, such as community assembly or interspecies interactions in individual granules during their formation and growth.

Granulation of partial denitrification sludge: Advances in mechanism understanding, technologies development and perspectives

The high-rate and stably efficient nitrite generation is vital and still challenges the wide application of partial denitrification (PD) and anammox technology. Increasing attention has been drawn to the granulation of PD biomass. However, the knowledge of PD granular sludge is still limited in terms of granules characterization and mechanisms of biomass aggregation for high nitrite accumulation. This work reviewed the performance and granulation of PD biomass for high nitrite accumulation via nitrate reduction, including the system start-up, influential factors, granular characteristics, hypothetical mechanism, challenges and perspectives in future application. The physiochemical characterization and key influential factors were summarized in view of nitrite production, morphology analysis, extracellular polymer substance structure, as well as microbial mechanisms. The PD granules exhibit potential advantages of a high biomass density, good settleability, high hydraulic loading rates, and strong shock resistance. A novel granular sludge-based PD combined with anammox process was proposed to enhance the capability of nitrogen removal. In the future, PD granules utilizing different electron donors is a promising way to broaden the application of anammox technology in both municipal and industrial wastewater treatment.

Hydroxyapatite (HAP) formation in acetate-driven partial denitrification process: Enhancing sludge granulation and phosphorus removal

Partial denitrification/anammox (PD/A) processes have emerged as a promising technology for efficient nitrogen removal from wastewater. However, these processes fail to remove phosphorus (P), a key pollutant that contributes to water eutrophication. To address this issue, the potential of inducing hydroxyapatite (HAP) precipitation in PD processes to achieve simultaneous P removal was investigated for the first time. Specifically, three SBRs (R1-R3) for PD were operated with adding varying concentrations of external Ca (30, 60, and 120 mg/L, respectively). Results demonstrated significant P reduction in all three SBRs, particularly in R3 with high Ca, which achieved an 80 % removal efficiency. Notably, sludge granulation was observed during operation, with the granule size in R3 with high Ca reaching 906.1 μm during the stable period, exceeding those in R2 (788.7 μm) and R1 (707.1 μm). This led to good settle ability of the PD sludge, as demonstrated by the lowest SVI5 (20 mL/g MLSS). Moreover, the decrease in the MLVSS/MLSS ratio suggested that the inorganic content accumulated, as observed by confocal laser scanning microscopy in the interior of the granules. Elemental composition analysis suggested that PD granules contained high P and Ca, while the X-ray diffraction (XRD) results confirmed the formation of HAP. Overall, this study demonstrated that PD-HAP coupled granular sludge process has potential as a robust and efficient method for nitrite production, as well as effective P removal and recovery, thereby advancing the application of anammox processes in wastewater treatment.

Metagenomic Analysis of a Continuous-Flow Aerobic Granulation System for Wastewater Treatment

Aerobic granulation is an emerging process in wastewater treatment that has the potential to accelerate sedimentation of the microbial biomass during secondary treatment. Aerobic granulation has been difficult to achieve in the continuous flow reactors (CFRs) used in modern wastewater treatment plants. Recent research has demonstrated that the alternation of nutrient-abundant (feast) and nutrient-limiting (famine) conditions is able to promote aerobic granulation in a CFR. In this study, we conducted a metagenomic analysis with the objective of characterizing the bacterial composition of the granular biomass developed in three simulated plug flow reactors (PFRs) with different feast-to-famine ratios. Phylogenetic analyses revealed a clear distinction between the bacterial composition of aerobic granules in the pilot simulated PFRs as compared with conventional activated sludge. Larger and denser granules, showing improved sedimentation properties, were observed in the PFR with the longest famine time and were characterized by a greater proportion of bacteria producing abundant extracellular polymeric substances (EPS). Functional metagenomic analysis based on KEGG pathways indicated that the large and dense aerobic granules in the PFR with the longest famine time showed increased functionalities related to secretion systems and quorum sensing, which are characteristics of bacteria in biofilms and aerobic granules. This study contributes to a further understanding of the relationship between aerobic granule morphology and the bacterial composition of the granular biomass.

Granule formation mechanism, key influencing factors, and resource recycling in aerobic granular sludge (AGS) wastewater treatment: A review

The high-efficiency and additionally economic benefits generated from aerobic granular sludge (AGS) wastewater treatment have led to its increasing popularity among academics and industrial players. The AGS process can recycle high value-added biomaterials including extracellular polymeric substances (EPS), sodium alginate-like external polymer (ALE), polyhydroxyfatty acid (PHA), and phosphorus (P), etc., which can serve various fields including agriculture, construction, and chemical while removing pollutants from wastewaters. The effects of various key operation parameters on formation and structural stability of AGS are comprehensively summarized. The degradable metabolism of typical pollutants and corresponding microbial diversity and succession in the AGS wastewater treatment system are also discussed, especially with a focus on emerging contaminants removal. In addition, recent attempts for potentially effective production of high value-added biomaterials from AGS are proposed, particularly concerning improving the yield, quality, and application of these biomaterials. This review aims to provide a reference for in-depth research on the AGS process, suggesting a new alternative for wastewater treatment recycling.

Structure-Thermodynamic Relationship of a Polysaccharide Gel (Alginate) as a Function of Water Content and Counterion Type (Na vs Ca)

Biofilms are the predominant mode of microbial life on Earth, and so a deep understanding of microbial communities─and their impacts on environmental processes─requires a firm understanding of biofilm properties. Because of the importance of biofilms to their microbial inhabitants, microbes have evolved different ways of engineering and reconfiguring the matrix of extracellular polymeric substances (EPS) that constitute the main non-living component of biofilms. This ability makes it difficult to distinguish between the biotic and abiotic origins of biofilm properties. An important route toward establishing this distinction has been the study of simplified models of the EPS matrix. This study builds on such efforts by using atomistic simulations to predict the nanoscale (≤10 nm scale) structure of a model EPS matrix and the sensitivity of this structure to interpolymer interactions and water content. To accomplish this, we use replica exchange molecular dynamics (REMD) simulations to generate all-atom configurations of ten 3.4 kDa alginate polymers at a range of water contents and Ca-Na ratios. Simulated systems are solvated with explicitly modeled water molecules, which allows us to capture the discrete structure of the hydrating water and to examine the thermodynamic stability of water in the gels as they are progressively dehydrated. Our primary findings are that (i) the structure of the hydrogels is highly sensitive to the identity of the charge-compensating cations, (ii) the thermodynamics of water within the gels (specific enthalpy and free energy) are, surprisingly, only weakly sensitive to cation identity, and (iii) predictions of the differential enthalpy and free energy of hydration include a short-ranged enthalpic term that promotes hydration and a longer-ranged (presumably entropic) term that promotes dehydration, where short and long ranges refer to distances shorter or longer than ∼0.6 nm between alginate strands.

Potential causes of partial-denitrification (PD) granular sludge breakdown under high nitrate loading rates

The granule instability has been frequently reported during the operation of high loading rates. While, there no research was performed on the recently developed anoxic partial-denitrification (PD) granules, a novel pathway in producing nitrite from nitrate for anammox process. Herein, this work, for the first time, investigated the influence of nitrate loading rates on the instability of PD granules and identified the key causes. Two lab-scale sequencing batch reactors (SBRs) were operated with nitrate loading rates (NLR) increased from 0.48 to 3.84 kg N/m³/d (R1, 8 cycles/d), and 0.96 to 7.68 kg N/m³/d (R2, 16 cycles/d) by gradually elevating the influent nitrate concentration. Results showed that nitrite production rates increased with the NLRs, with a maximal value of 5.26 kg N/m³/d obtained. However, the compact regular PD granules were not stable and broke down when NLR was above 3.84 kg N/m³/d, which resulted in serious sludge washing out from SBR. The high NLRs led to the extracellular polymeric substances (EPS) transformation in terms of its composition and structure, which the protein content in the EPS and the tightly bound EPS (T-EPS) fraction was significantly decreased, this was supposed to be the major reason causing the breakdown of PD granules. Besides, it was found the PD granule in R2 was more deteriorated than that in R1 under the same high NLR, suggesting the short starvation (idle) times in SBR cycle was likely another reason impairing the stability of PD granules. Overall, this research provides useful information in development of granule-based PD systems and sheds light on achieving high-rate nitrite production in SBR with great stability.

Cooperation of heterotrophic bacteria enables stronger resilience of halophilic assimilation biosystem than nitrification system under long-term stagnation

Long-term stagnation of biosystems (with no or very little wastewater) owing to seasonal downtime or failure maintenance brings great challenges to the performance recovery after system restart. In particular, the reduction of microbial activity and change of dissolved organic matter (DOM) affect the effluent quality and subsequent treatment procedures. Monitoring the dynamics and resilience of biosystems after long-term stagnation is important to formulate targeted countermeasures for system stability. However, the influence of long-term stagnation on autotrophic nitrification (AN) and heterotrophic assimilation (HA) biosystems has not been systematically explored. Here, we used halophilic AN and HA systems to study the stability and resilience of two nitrogen removal consortia after long-term stagnation. The results showed that 97.5 % and 93 % of ammonium and 47.0 % and 90.1 % of total nitrogen were removed using the halophilic AN and HA systems, respectively, in the stable period. After four weeks of stagnation, the HA system showed stronger resilience than AN system, in terms of faster recovery of treatment performance, and less fluctuations in sludge settleability and extracellular polymeric substances. In addition, after the stagnation period, the DOM of AN system was rich in low-molecular refractory humic acid, whereas that of HA system was rich in high-molecular proteins. The stagnation period led to the replacement of the dominant heterotrophic functional microorganisms, Paracoccus and Halomonas, with Muricauda and Marinobacterium in the HA system. The microbial network results revealed that the cooperation of heterotrophic bacteria enables stronger resilience of the HA system from prolonged stagnation than the AN system. In addition, the nitrogen removal efficiency, protein to polysaccharide ratio of EPS and fluorescence intensity of DOM were significantly correlated with the microbial community composition. These results suggest that AN system has greater risks in terms of treatment performance and sludge stability than the system after long-term stagnation.

Long-term effects of hydrocyclone operation on activated sludge morphology and full-scale secondary settling tank wet-weather operation in long sludge age WWTP

This paper presents the study concerning long-term effects of a full scale hydrocyclone unit implemented in a continuous flow long sludge age system, on sedimentation, treatment efficiency and sludge morphology. The research concentrates on identifying the mechanisms of sludge behaviour within the system. The gravimetric selection of activated sludge via a hydrocyclone is a recent development for enhancing sludge separation, where heavier flocs are retained in the system, and lighter ones are discarded as waste sludge. The effects of implementing hydroclyclones were analysed with the use of SEM imagining and fractal dimensioning through the frequent assessment of sludge settling capabilities, effluent quality, and floc properties. Over the course of 60 weeks of hydrocyclone operation, sedimentation efficiency varied significantly. Sludge volume index values of 40 mL/g, achieved during the warm season, were not sustained when the temperature decreased and an overgrowth of filamentous bacteria occurred. Good settling efficiency was also observed in batch tests, where settling velocity of experimental sludge was app. 1 m/h higher than for the reference train at the same concentrations. This was confirmed during wet weather, as the experimental train sustained safe sludge blanket height in secondary clarifiers. SEM imaging and fractal dimension analysis revealed that the underflow that returned to the system had a more compact and spherical shape, which led to an increased content of granule-like particles in the reactor. The presence of flocs with a diameter exceeding 900 μm in the underflow, which is not observed in the feed, indicated agglomeration within the hydrocyclone. This is contradictory to most of the literature data coming from laboratory experiments. This phenomenon was attributed to differences in the size and geometry of the used hydrocyclones, and the potential process mechanism was presented.

Synergism and mutualistic interactions between microalgae and fungi in fungi-microalgae symbiotic system

The method of collecting microalgae using fungal mycelium pellets has attracted widespread attention because of its high efficiency and simplicity. In this study, the interaction in FMSS was explored using Aspergillus fumigatus and Synechocystis sp. PCC6803. Under the conditions of 25-30 °C, pH of 5.0, 160 rpm, a light intensity of 1000 lx, light to darkness ratio of 6:18 h, and glucose concentration of 1.5 g/L, the FMSS had the highest biomass and recovery efficiency. SEM, TEM, and Zeta analysis showed that microalgae can be fixed on the surface of fungal mycelium pellets by the electrostatic attraction (amino, amide, phosphate, hydroxyl, and aldehyde groups) of EPS. The N cycling and CO₂-O₂ cycling promoted the synthesis of amino acids and provided a guarantee for gas exchange, and the intermediate metabolites (CO₃^2- and HCO₃^-/H₂CO₃) satisfied the metabolic activities. The microalgae and fungi worked in coordination each other, which was the mutualistic symbiosis.

Insight into aerobic phosphorus removal from wastewater in algal-bacterial aerobic granular sludge system

This study aimed to figure out the main contributors to aerobic phosphorus (P) removal in the algal-bacterial aerobic granular sludge (AGS)-based wastewater treatment system. Kinetics study showed that aerobic P removal was controlled by macropore (contributing to 64-75% P removal) and micropore diffusion, and the different light intensity (0, 4.0, 12.3, and 24.4 klux) didn't exert significant (p > 0.05) influence on P removal. On the other hand, the increasing light intensity did promote microalgae metabolism, leading to the elevated wastewater pH (8.0-9.8). The resultant pH increase had a strongly negative relationship (R² = 0.9723) with P uptake by polyphosphate-accumulating organisms, while promoted chemical Ca-P precipitation at a molar Ca/P ratio of 1.05. Results from this work could provide an in-depth understanding of microalgae-bacteria symbiotic interaction, which is helpful to better design and operate the algal-bacterial AGS systems.

Formulation of a protocol to evaluate the aerobic granulation potential (AGP) of an inoculum

This paper proposes and develops a protocol for measuring the aerobic granulation potential of sludge, aiming to provide an affordable and simple alternative that can facilitate the development of aerobic granulation technology. In this sense, the protocol comprises a set of parameters and considerations that interact to create a controlled environment and stimulate cell population clustering. All of this is done in the context of procedural simplicity, low cost, and the speed at which results are obtained. The protocol is essentially a three-stage method: preparation of the substrate, adaptation of the inoculum, and implementation of the protocol. Simple parameters were measured to evaluate the granulation process: SVI, settling velocity, and morphological parameters. The protocol was validated according to optimal ranges and criteria previously established in the literature. For this purpose, an activated sludge inoculum from a domestic wastewater treatment plant was submitted to the protocol, obtaining an optimal response of the biomass (SVI₅ =13.90 mL g⁻¹, settling velocity= 25,79 m h⁻¹, Diameter > 0.2 mm) in a relatively short time (7 d). The results show that this protocol can constitute a tool for evaluation and decision-making using traditional laboratory equipment and is applicable at different scales.

Rapid granulation of aerobic granular sludge and maintaining its stability by combining the effects of multi-ionic matrix and bio-carrier in a continuous-flow membrane bioreactor

The present investigation aimed at providing a novel approach to promote the rapid granulation and stability of aerobic granular sludge (AGS) in a continuous-flow membrane bioreactor (MBR). By operating two identical MBRs with or with no bio-carrier for 125 days, it was found that the combination of multi-ionic matrix and bio-carrier could promote the rapid formation and maintain the long-term stability of AGS. The primary AGS was first observed inside the reactor on day 14, and the mature AGS appeared soon and kept stable for more than 4 months (its average size still was about 800 μm on day 125). Suitable filling ratio of bio-carrier was beneficial to form a stable and regular circulating water flow inside, and adding divalent metal ions quickly reduced the negative charges of tiny sludge particles, which were two essential factors leading to the rapid granulation of AGS and maintaining its stability. The multi-ionic matrix not only enhanced the biological aggregation process, but also facilitated the expansion of the cultivated AGS into a new multi-habitat system of Mn-AGS, in which, complex microbial communities with rich bio-diversity robustly promoted the efficient removal of organic pollutants and nutrients.

Reproducibility of Aerobic Granules in Treating Low-Strength and Low-C/N-Ratio Wastewater and Associated Microbial Community Structure

Long-term stability of the aerobic granular sludge system is essentially based on the microbial community structure of the biomass. In this study, the physicochemical and microbial characteristics of sludge and wastewater treatment performance were investigated regarding formation, maturation, and long-term maintenance of granules in two parallel sequencing batch reactors (SBR), R1 and R2, under identical conditions. The aim was to explore the linkage between microbial community structure of the aerobic granules, their long-term stability, as well as the reproducibility of granulation and long-term stability. The two reactors were operated with a COD concentration of 400 mg/L and a chemical oxygen demand to nitrogen (COD/N) ratio of 4:1 under anoxic–oxic conditions. It was found that although SVI30, sludge size, and distributions in R1 and R2 were different, aerobic granules were formed, and they maintained long-term stability in both reactors for 320 days, implying that a certain level of randomness of granulation does not affect the long-term stability and performance for COD and N removal. In addition, a significant reduction in the richness and diversity of microbial production was observed after the sludge was converted from inoculum or flocs to granules, but this did not negatively affect the performance of wastewater treatment. Among the predominant microbial species in aerobic granules, Zoogloea was identified as the most important bacteria present during the whole operation with the highest abundance, while Thauera was the important genus in the formation and maturation of the aerobic granules, but it cannot be maintained long-term due to the low food-to-microorganisms ratio (F/M) in the system. In addition, some species from Ohtaekwangia, Chryseobacterium, Taibaiella, and Tahibacter were found to proliferate strongly during long-term maintenance of aerobic granules. They may play an important role in the long-term stability of aerobic granules. These results demonstrate the reproducibility of granulation, the small influence of granulation on long-term stability, and the robustness of aerobic granulation for the removal of COD and N. Overall, our study contributes significantly to the understanding of microbial community structure for the long-term stability of aerobic granular sludge in the treatment of low-COD and low-COD/N-ratio wastewater in practice.

Achieving stably enhanced biological phosphorus removal from aerobic granular sludge system via phosphorus rich liquid extraction during anaerobic period

In order to sustainably manage wastewater treatment plants and the environment, enhanced biological phosphorus (P) removal (EBPR) was proposed to achieve P recovery through extracting P-rich liquid (i.e., Phostrip) from the bottom of aerobic granular sludge (AGS)-based sequencing batch reactors (SBRs) under no mixing during the anaerobic phase. Results showed both tested bacterial AGS (BAGS) and algal-bacterial AGS (A-BAGS) systems stably produced low effluent P (<0.05 mg-P/L) with little impact on their organics and NH₄⁺-N removals (>99%). The collected P-rich liquids (55-83 mg-P/L) from both systems showed great potential for P recovery of about 83.85 ± 0.57 % (BAGS) or 83.99 ± 0.77% (A-BAGS), which were contributed by the influent P (>95%) and P reserves in granules based on P balance analysis. This study suggests that the AGS-based SBRs coupling the Phostrip holds great potentials for P recovery profit and further reduction in energy consumption.

Understanding the role of cations and hydrogen bonds on the stability of aerobic granules from the perspective of the aggregation and adhesion behavior of extracellular polymeric substances

Extracellular polymeric substances (EPS) were essential for the granulation and stability of aerobic granular sludge (AGS). In this study, the effects of electrostatic interactions, bridging effect of divalent cations, and hydrogen bonds on the EPS-EPS and EPS-surface interaction were verified by enhancing or reducing the specific interaction with the addition of cations or urea. The size and the surface properties of EPS aggregates were investigated, the adhesion behavior and viscoelasticity of EPS were analyzed by quartz crystal microbalance with dissipation monitoring. The changes of EPS in response to the various condition were analyzed by infrared spectroscopy and fluorescence spectrum. The electrostatic repulsion between EPS could be significantly reduced by Ca²⁺ addition. With the bridging effect, 10 μM of Ca²⁺ could reduce the negative charge of EPS more effectively than 200 μM of Na⁺. As Ca²⁺ could form the complex with the protein and Ca²⁺ was more inclined to bind with COO^-, the Ca²⁺ took advantage of boosting the EPS-EPS and EPS-surface interaction than Mg²⁺ at the same ionic strength, which resulted in the denser structure of calcium-treated EPS. The destruction of hydrogen bonds by urea addition reduced the EPS-EPS and EPS-surface interaction, which confirmed the potential existence of hydrogen bonds in the interaction of EPS-EPS and EPS-surface. The removal of hydrogen bonds of EPS destroyed the protein's secondary structure and caused the unfolded state of the protein, which led to the looser structure of the EPS layer.

Effects of wastewater type on stability and operating conditions control strategy in relation to the formation of aerobic granular sludge - a review

Currently, research trends on aerobic granular sludge (AGS) have integrated the operating conditions of extracellular polymeric substances (EPS) towards the stability of AGS systems in various types of wastewater with different physical and biochemical characteristics. More attention is given to the stability of the AGS system for real site applications. Although recent studies have reported comprehensively the mechanism of AGS formation and stability in relation to other intermolecular interactions such as microbial distribution, shock loading and toxicity, standard operating condition control strategies for different types of wastewater have not yet been discussed. Thus, the dimensional multi-layer structural model of AGS is discussed comprehensively in the first part of this review paper, focusing on diameter size, thickness variability of each layer and diffusion factor. This can assist in facilitating the interrelation between disposition and stability of AGS structure to correspond to the changes in wastewater types, which is the main objective and novelty of this review.

Start-up of an aerobic granular sludge system from stored granules: Evaluating the impact of storage period on biomass activity and stability and the effect of temperature on nitrification and phosphorus removal rates

Aerobic granular sludge (AGS) has been considered a breakthrough within the wastewater treatment sector. However, the long reactor start-up for the formation of granules is challenging and may hinder the spread of this technology. To circumvent this obstacle, inoculation of the reactors with pre-formed granules from existing plants is an interesting approach. In this context, issues related to biomass storage becomes very relevant. In this study, reactivation of aerobic granular biomass after storage was evaluated in a sequencing batch reactor (SBR) designed for achieving simultaneous organic matter, nitrogen and phosphorus removal. Two different scenarios, short (40 days) and long (180 days) storage periods, were assessed, and their influence on the granules physical properties and bioactivity was addressed. The results revealed that the granules stored for a shorter period showed higher resistance to breakage and underwent smooth color changes. On the other hand, the biomass stored for a longer period acquired a dark color and was more susceptible to disruption during reactivation. The granules stored for 6 months become swollen and exhibited an irregular morphology and fluffy structure within the first days of reactivation. Consequently, their settling properties were adversely affected, and some parameters such as the food-to-microorganism ratio had to be adjusted to prevent granules disintegration. Regarding the bioactivity of important microbial functional groups, COD removal was rapidly restored within a few days of SBR operation with the biomass stored for a shorter period. However, it took longer for the biomass stored for 180 days to reach the same performance observed for the granules stored for 40 days. A similar trend is valid for nitrification. In the experiments with sludge stored for a longer time, it took almost twice as long to reach effluent ammonium concentrations lower than 1 mg NH₄⁺-N L^-1 compared to the test using biomass stored for 40 days. Phosphate removal was strongly affected by biomass storage, especially after 180 days of inactivity, a condition found to be detrimental for polyphosphate-accumulating organisms. Finally, cycle tests were also conducted to assess substrate conversion rates for comparison between different trials and evaluate the influence of temperature (10-35 °C) on nitrification and phosphate removal rates.

Recovery of structure and activity of disintegrated aerobic granular sludge after long-term storage: Effect of exogenous N-acyl-homoserine lactones

Long-term storage of aerobic granular sludge (AGS) may lead to granule inactivation and disintegration. Granule recovery in both structure and activity is important for scale-up and stability of AGS, but information about the structure recovery of stored AGS is limited. In addition, whether short-term exogenous N-acyl-homoserine lactones (AHLs) regulations could accelerate the granule recovery and sustain positive effects on AGS is unknown. Herein, the recovery of 33-month stored AGS was performed in three reactors for 38 days (phase I) at different exogenous AHLs concentrations (0, 50 and 500 nM of AHL-mixtures in R0, R1 and R2, respectively) and for an extended 45 days without exogenous AHLs (phase II). Results demonstrated successful recovery of disintegrated AGS in all reactors, although it was relatively time-consuming in R0. The treatment performance was similar among the reactors and steady-state removal of COD (90%) and NH₄⁺-N (94%) could be recovered within 7 and 21 days, respectively. However, exogenous AHLs regulation (especially in R1) obviously accelerated bioactivity recovery of heterotrophs and nitrifiers and improved granule characteristics, including biomass, density, hydrophobicity and extracellular polymeric substance (EPS). During phase II, sustainable positive effects remained in R1, but granule characteristics deteriorated in R2. The abundance of functional genera Thauera, Nitrosomonas and Candidatus_Nitrotoga, contributed to the rapid recovery and helped maintain the structure and activity of AGS. The predictive functional profiling of bacterial communities also demonstrated sustainably higher activities of metabolism, growth and signal sensing under exogenous AHLs regulation at an appropriate content.

Bio-carrier-enhanced aerobic granulation: Effects on the extracellular polymeric substances production and microorganism community

In this study, the strengthening effect of bio-carrier inoculation in the process of aerobic granulation and its influence on the microbial secretion of extracellular polymeric substances (EPS) has been systematically explored, to further understand and perfect the rapid granulation mechanism. Complete granulation was achieved within 15 days, and the granule morphology realized in a reactor inoculated with the bio-carrier (R1) was better than that in the control group (R2), in which complete granulation was not achieved during the entire operation period. However, AGS gradually disintegrated after the 20th day because of the strong shearing force, the crushed AGS enhanced granulation, however did not ensure stability. The average EPS content in R1 20 mg﹒gVSS^-1 higher than that in R2, and the protein (PN) content changes around 41.23-82.56 mg﹒gVSS^-1 during the granulation process. This indicates that the bio-carrier stimulates microorganisms to secrete more EPS, and PN may have a greater effect on the aggregation of microorganisms. The results showed that the addition of the bio-carrier shortened the AGS granulation time, and increased the EPS content, and the broken AGS played an auxiliary role as the nucleus for floc attachment.

Research on rapid cultivation of aerobic granular sludge (AGS) with different feast-famine strategies in continuous flow reactor and achieving high-level denitrification via utilization of soluble microbial product (SMP)

The mixture of partial AGS and flocculent sludge in continuous flow reactors were operated with periodic famine (PF) strategy and continuous feast (CF) strategy to reveal the impact of the feast-famine strategies on cultivation of AGS and the dynamics of microbial communities. The experimental results showed that the mature AGS were cultivated with PF and CF strategy on the 31st and the 71st days respectively, which was the result of good extracellular polymeric substance (EPS) secretion with PF strategy. It could accelerate the formation of microbial aggregates due to the conditions of periodic famine. High-level denitrification with PF strategy via utilization of SMP was examined by EEM-PARAFAC on cycle test. The high-throughput pyrosequencing showed that the dominant bacteria with PF strategy involved functional bacteria of nutrient removal and EPS secreting bacteria, while the dominant bacteria were fast-growing heterotrophic organisms with CF strategy.

Fluctuation and Re-Establishment of Aerobic Granules Properties during the Long-Term Operation Period with Low-Strength and Low C/N Ratio Wastewater

Long-term structure stability of aerobic granules is critical to maintaining stable wastewater treatment performance. In this study, granulation and long-term stability of sludge-treating synthetic wastewater with a low chemical oxygen demand to nitrogen (COD/N) ratio of 4:1 and COD concentration of 400 mg/L in anoxic-oxic conditions were investigated for over 300 days. Inoculated suspended sludge gradually transformed into granules-dominant sludge on day 80. Due to the improved sludge volume index after 30 min settling (SVI30), mixed liquor suspended solids (MLSS) reached 5.2 g/L on day 140. Without any external intervention or disturbance, aerobic granules started to disintegrate from day 140, causing the increase in SVI and the decrease in biomass concentration until day 210, with the average sludge size reduced to 243 µm. From day 210, granular sludge started to be re-established by re-granulation, and the average granule size increased to 500 µm on day 302. During these disintegration and re-granulation periods, there was no obvious difference in terms of COD removal and nitrification, but microbial species were found more diverse after the re-granulation, with Thauera and Sphingomonas dominant. Although there was no external intervention, the food to microorganisms ratio (F/M) varied significantly due to the changes in biomass concentration caused by strong selective pressure and the change of sludge-settling ability in the reactor. F/M ratios should be controlled between 0.3 and 1.0 gCOD/gSS·d to maintain the stable structure of granules to minimize the fluctuation of sludge properties under the conditions used in this study. Although aerobic granular sludge is able to re-establish itself after disintegration, controlling F/M ratios in a certain range would benefit long-term stability. The findings in this study are significant to deepen the understanding of granule stability with low-strength and low COD ratio wastewater and, thus, provide guidance for maintaining the long-term stability of granules.

Understanding the dependence of start-up and stability of aerobic granule on pH from the perspective of adhesion behavior and properties of extracellular polymeric substances

The start-up and stability of aerobic granular sludge (AGS) could be greatly influenced by pH variation. The inner core in the aerobic granules provided adhesion sites for microbes by extracellular polymeric substances (EPS) adhesion, the adhesion behavior of EPS and the properties of adhesion layer formed by EPS with pH changes might directly affect the start-up efficiency and stability of AGS. In this study, the adhesion behavior of EPS at an inorganic surface and the viscoelasticity of the EPS adhesion layer with pH variation was investigated by quartz crystal microbalance with dissipation monitoring, and the response of functional groups and intermolecular interactions to pH changes was explored. Based on the interaction energy calculation, it was found that the charge repulsion between substances dominated the interactions between EPS components and between EPS and the surface by regulating protonation and deprotonation of the functional groups of EPS with pH variation. A lower energy barrier between EPS and the surface at a lower pH value could facilitate the adhesion of EPS at the surface, which favored the rapid start-up of AGS. Moreover, the high ratio of both α-helix and intermolecular hydrogen bond at an acid condition could enhance the gel-strength of EPS, which provide AGS the resistance ability against external disturbance. This study revealed the mechanism of the interactions in EPS adhesion process with the variation of pH and provided useful information for a better understanding of the stability of the AGS.

Phase equilibria, physical and rheological properties of extracellular polymeric substances in the aqueous urea solutions at different temperatures and concentrations

Extracellular polymeric substances (EPS) were extracted from aerobic granule sludge (AGS) using 8 M aqueous urea solution. It seems that the knowledge of these multi-component systems properties and the ability to predict their phase behavior is necessary for the extraction units design as well as process optimization. In this regard, water activity using the Dynamic Vapor Sorption (DVS) method, viscosity and shear stress, pH, and conductivity were measured at 283.15-343.15 K and 0.0108 to 0.0375 wt fraction of EPS. The salting effects in ternary systems assessed and the results were interpreted in terms of solute-water and solute-solute interactions. It was found these systems were not semi-ideal and except at 283.15 K, had a positive deviation from ideal solution behavior and only at this temperature as the optimum extraction temperature, the salting-in effect was observed for each concentration of EPS. The ternary solutions behave like pseudo-plastic fluids while aqueous urea solution is a Newtonian fluid. Increasing the temperature causes a decrease and increase in pH and conductivity of ternary solutions, respectively and the presence of EPS increases those of 8 M urea solution significantly.

A Bioreactor Designed for Restricting Oversize of Aerobic Granular Sludge

Aerobic granular sludge (AGS) with oversized diameter commonly affects its stability and pollutant removal. In order to effectively restrict the particle size of AGS, a sequencing batch reactor (SBR) with a spiny aeration device was put forward. A conventional SBR (R1) and an SBR (R2) with the spiny aeration device treating tannery wastewater were compared in the laboratory. The result indicates that the size of the granular sludge from R2 was smaller than that from R1 with sludge granulation. The spines and air bubbles could effectively restrict the particle size of AGS by collision and abrasion. Nevertheless, there was no significant change in mixed liquor suspended solids (MLSS) and the sludge volume index (SVI) in either bioreactors. The removal (%) of chemical oxygen demand (COD) and ammonia nitrogen (NH4+-N) in these two bioreactors did not differ from each other greatly. The analysis of biological composition displays that the proportion of Proteobacteria decreased slightly in R2. The X-ray fluorescence (XRF) analysis revealed less accumulation of Fe and Ca in smaller granules. Furthermore, a pilot-scale SBR with a spiny aeration device was successfully utilized to restrict the diameter of granules at about 300 μm.

Fast granulation of halophilic activated sludge treating low-strength organic saline wastewater via addition of divalent cations

Granulation of halophilic activated sludge is an important solution to solve the problem of solid-liquid separation in biological treatment of saline wastewater. This study demonstrated that by adding divalent cations into the saline influent with low organic load, halophilic granular sludge with an average diameter of 910 ± 10 μm can be cultivated. The close correlation between divalent cations and particle size indicated that Ca²⁺ played a major role in the granulation process. Ca²⁺ was accumulated in halophilic granular sludge, which provided an inorganic carrier for microbial aggregation and leaded to the dominance of halophilic bacteria of the family Flavobacteriaceae. The halophilic bacteria secreted a large amount of extracellular polymeric substances (EPS), which contained 70.0 ± 0.02% protein. By enhancing the EPS network of protein and Ca²⁺, halophilic granular sludge was formed. The addition of Mg²⁺ enhanced the network of Mg²⁺ and loosely bound EPS, which could be destroyed due to Na⁺ substitution. This study provides an effective granulation method for halophilic activated sludge.

Feast/famine ratio determined continuous flow aerobic granulation

Plug flow reactors (PFRs) made of multiple completely stirred tank reactors (CSTRs) in series were used to cultivate aerobic granules in real domestic wastewater. Theoretically, changing the number of CSTR chambers in series will change the nature of plug flow, and thus alter the pattern of the feast/famine condition and impact the aerobic granulation progress. Therefore, PFRs were operated in 4-, 6-, and 8-chamber mode under the same gravity selection pressure (a critical settling velocity of 9.75 m h^-1) and hydraulic retention time (6.5 h) until steady states were reached to evaluate the effect of the feast/famine condition on continuous flow aerobic granulation. The sludge particle size, circularity, settleability, specific gravity, zone settling velocity, and extracellular polymeric substance contents were analyzed to evaluate the role that a feast/famine regime plays in aerobic granulation. It was found that aerobic granulation failed whenever the feast/famine ratio was greater than 0.5. The results support a conclusion that the feast/famine condition is likely a prerequisite for continuous flow aerobic granulation.

Influence of static mixer on the development of aerobic granules for the treatment of low-medium strength domestic wastewater

The present work investigates the feasibility of aerobic granulation for the treatment of low-medium strength domestic wastewater for long-term operation and effects of a static mixer on the properties and removal performances of the aerobic granules formed. The static mixer was installed in a sequential batch reactor to provide higher hydrodynamic shear force in enhancing the formation of the aerobic granules. Aerobic granules were successfully formed in the domestic wastewater, and the granulation treatment system was sustained for a period of 356 days without granules disintegration. Subsequent to the installation, aerobic granules with a low SVI₃₀ of 41.37 mL/g_TSS, average diameter 1.11 mm, granular strength with integrity coefficient 10.4% and regular shape with minimum filamentous outgrowth were formed. Mineral concentrations such as Fe, Mg, Ca and Na as well as composition of protein and polysaccharide in tightly bound-extracellular polymeric substance of the aerobic granules were found to be higher under the effect of the static mixer. However, no significant improvement was observed on the TCOD, NH₄⁺-N and TSS removal performance. Good TCOD and TSS removal performance of above 85% and 90%, respectively and moderate NH₄⁺-N removal performance of about 60% were observed throughout the study. Higher simultaneous nitrification and denitrification (SND) efficiency of 56% was observed after the installation of the static mixer, as compared to 21% prior. Therefore, it may be concluded that the installation of the static mixer significantly improved the properties of aerobic granules formation and SND efficiency but not the TCOD, NH₄⁺-N and TSS removal performance.

Positive effects of zeolite powder on aerobic granulation: Nitrogen and phosphorus removal and insights into the interaction mechanisms

Aerobic granular sludge is considered one of the most promising biological wastewater treatment technologies of the 21st century. However, the long granulation time and poor treatment effect on N and P have severely limited its popularity and large-scale application. In this study, we systematically examine the strengthening effects of zeolite powder on granulation, N and P removal, and their interaction mechanisms. The addition of zeolite powder decreased sludge granulation time to 18 d, and improved average N and P removal rates by 4.48% and 2.22%, respectively. The multi-pore and nutrient-rich environment of the zeolite powder is beneficial for maintaining microbial activity and granular stability. Moreover, its adsorption to N and P enriches their respective removal strains, improving their removal efficiency.

Characterization of aerobic granules formed in an aspartic acid fed sequencing batch reactor under unfavorable hydrodynamic selection conditions

Granules initiation and development is the backbone of aerobic granular sludge technology. Feed composition can notably affect initiation and development of aerobic granules, and yield aerobic granules with distinct microbial community, morphology and structure. This paper reports an unexpected formation of aerobic granules in an aspartic acid fed SBR under unfavorable hydrodynamic selection conditions. Detailed characteristics of these aerobic granules were investigated in terms of morphology, structure, bioactivity and EPS. The results showed that due to the absence of favorable hydrodynamic selection pressure, the formed aerobic granules had an irregular shape with a rough outline and loose internal structure, which was quite different from mature aerobic granules. Bacteria in these aerobic granules were mainly presented in the form of microcolony with calcium and β-polysaccharides responsible for its mechanical stability. The high N/C ratio of aspartic acid enabled the enrichment of significant amount of nitrifiers within aerobic granules and thus resulted in high nitrification activity of these aerobic granules. The negatively charged and hydrophilic aspartic acid also induced the bacteria to secrete more exopolysaccharides for contributing to more neutral and hydrophilic surface of the aerobic granules, which was beneficial for aspartic acid capture. As a result, polysaccharides, rather than proteins, became the major components of EPS in these aerobic granules. This paper provides us a foundation to better understand the granulation potential of proteinaceous substrates that is frequently encountered in industrial wastewaters.

Formation of anaerobic granules and microbial community structure analysis in anaerobic hydrolysis denitrification reactor

An anaerobic hydrolysis denitrification (AnHD) process was developed to pretreat municipal wastewater for integrating partial nitration/anammox process. The results indicated that the carbon to nitrogen (C/N) ratio of municipal wastewater changed from 4.4 ± 0.3 to 2.2 ± 0.2 after pretreatment by AnHD process, which was favorable to the partial nitration/anammox process. The influent C/N ratio had influence on the formation of anaerobic granules. Two intrinsic factors, cyclic diguanylic acid (c-di-GMP) concentration and core bacterial community, were mainly responsible for the anaerobic granular formation. The higher c-di-GMP content increased the extracellular polymeric substances and decreased the motility of the bacteria, which was beneficial for the formation of anaerobic granules. The microbial community analysis showed that the lactic acid bacteria (Lactococcus) was the core bacteria during anaerobic hydrolysis process, while the denitrifying bacteria (Denitratisoma and unclassified Comamonadaceae) were the core bacterial community during AnHD process, which were responsible for nitrogen removal and anaerobic granular formation.

The effect of Np-magnetite on the granulation process of an SBR reactor used for domestic wastewater treatment

This study investigated the effect of magnetite nanoparticles (Np-magnetite) added to a pilot-scale sequencing batch reactor (SBR) treating domestic wastewater, to improve aerobic granular sludge (AGS) formation and the effects of granule disintegration. Np-magnetite additions (75 mg L^-1) were made during the start-up of the reactor and repeated after 100 and 170 days, when granule disintegration was observed. From the first Np-magnetite addition, SVI₅ was reduced from 1315 to 85 mL g^-1. The granular biomass was observed on the 56th day, when 57% of the granules presented diameters bigger than 212 µm. The 100-day disintegration episode disturbed the granular biomass, reducing the volatile suspended solids by 51%, increasing the SVI values to above 200 mL g^-1. Np-magnetite addition recovered all the granular biomass parameters to the values observed before disintegration. The treatment efficiency was stable during operation of the reactor for nutrients (52.8 ± 23.4% NH₄⁺-N; 54.5 ± 12.2% PO₄^3--P) and carbonaceous organic matter (71.7 ± 12.7% BOD₅; 77.5 ± 10.0% COD_t). Np-magnetite addition changed the microbial community of the granular sludge, analysed via high-throughput 16S RNA sequencing, and recovered the treatment efficiency previously disturbed by the disintegration processes. These results indicate the potential of Np-magnetite as an agent for sludge aggregation in an aerobic granular reactor.

Bacteriophage-mediated extracellular DNA release is important for the structural stability of aerobic granular sludge

The aim of this study was to investigate the microbial characteristics and the structural role of exDNA in different size AGSs. Metagenomic results showed that exDNA has a significantly lower GC content, ~46.0%, than the ~65.0% GC of intracellular DNA (inDNA). Taxonomic predictions showed most of the reads from the exDNA that could be taxonomically assigned were from members of the phyla Bacteroidetes (55.0-64.2% of the total exDNA reads). Assigned inDNA reads were mainly from Proteobacteria (50.9-57.8%) or Actinobacteria (18.0-28.0%). Reads mapping showed that exDNA read depths were similar across all predicted open reading frames from assembled genomes that were assigned as Bacteroidetes which is consistent with cell lysis as a source of exDNA. Enrichment of CRISPR-CAS proteins in exDNA reads and CRISPR spacers in Bacteroidetes associated draft genomes suggested that bacteriophage infection may be an important cause of lysis of these cells. A critical role for this exDNA was found using DNase I digestion experiments which showed that the exDNA was vital for the structural stability of relatively small sized AGS but not for the larger sized AGS. The characteristics of exDNA in AGSs revealed in this work provide a new perspective on AGS components and structural stability.

Formation and characteristics of filamentous granular sludge

Aerobic granular sludge process as a promising biotechnology has been one of the research hotspots in the area of wastewater treatment during the last two decades. In our study, after around 60 days' operation, filamentous granular sludge (FGS) was formed under low aeration (SAV = 0.085 cm/s) and multi-feeding conditions. The characteristics of FGS and the performance of the FGS system for organic matter and nutrients removal were investigated. The results showed that chemical oxygen demand (COD) and total organic carbon (TOC) removal efficiencies were relatively stable, while COD removal efficiency increased from 82% to 94% in the presence of sulfamethoxazole (SMZ) at low concentration (1 mg/L). At the same time, the TP removal efficiency could be improved and maintained at around 75%, while TN removal efficiency was flocculated at around 50%. The analysis of microbial diversity showed that Thiothrix and Trichococcus as typical filamentous species were detected and dominant in the FGS system. The abundance of Thiothrix increased from 15% to 34%, while Trichococcus decreased from 23% to 3% in the presence of SMZ.

Aggregate size-dependence of bacterial community separation in a full-scale membrane bioreactor plant

The size of bacterial aggregates can determine both nutrient removal and sludge/water separation in activated sludge processes. In this study, the bacterial community structures and network associations of different sized aggregates obtained from a full-scale membrane bioreactor plant over a one-year period were investigated. Our results showed that biodiversity of larger sized aggregates was significantly higher than that of smaller ones and that the bacterial compositions of different sized aggregates differed significantly from each other. Bacteria related to nutrient removal (e.g. denitrification, hydrolysis and fermentation) were found to be significantly more abundant in larger aggregates than smaller ones. Network analysis revealed significant difference in species-species interactions, topological roles of individual OTU and keystone populations among different sized aggregates. Moreover, the occurrence of keystone OTUs affiliated with denitrifiers (Thermomonas) in networks of large and medium aggregates may suggest that denitrification influences bacterial interactions in large and medium aggregates. Overall, our results indicate the aggregates size-dependence of bacterial community separation in activated sludge. The current findings not only can provide guidance for process design and operation optimization, but also highlight the necessity for paying more attentions to the aggregate-based community, metabolic function and gene expression of activated sludge in future studies.

Improving aerobic sludge granulation in sequential batch reactor by natural drying: Effluent sludge recovery and feeding back into reactor

One of the main problems in treating high volumes of wastewater is the long startup time required aerobic granular sludge (AGS), and this issue significantly limits the broad application of advanced AGS technology. To promote rapid AGS formation in the startup phase, a method was developed involving the recovery and natural drying of effluent sludge prior to feeding it back into the sequencing batch reactor (SBR). An analysis of the process shows that supplemented naturally dried sludge swiftly promoted sludge aggregation and granular sludge formation in the reactor, and feeding the SBR with naturally dried sludge aggregates (1.75 ± 0.05 g/L seven times) significantly shortened the granulation time in the startup phase by 14 days. In addition, MLSS, SVI₃₀, SVI₃₀/SVI₅, and the average granule size of AGS in the reactor were maintained at 4.66 g/L, 47.4 mL/g, 0.93, and 2.8 mm, respectively. When fed back into the bioreactor, the aggregates acted as nuclei/carriers in the rapid granulation and played a significant role in rendering the SBR operation stable. This approach could be used to eliminate the random granules aggregation-disintegration mechanism that occurs in the initial stage of AGS formation. The study results reveal that the removal rate of COD and NH₄⁺-N were above 95% and 96%, respectively. Furthermore, this approach requires less energy and significantly reduces the amount of sludge produced (as the effluent sludge is reused).

A sustainable strategy for effective regulation of aerobic granulation: Augmentation of the signaling molecule content by cultivating AHL-producing strains

The positive roles of N-acyl homoserine lactone (AHL)-mediated quorum sensing (QS) in aerobic granular sludge (AGS) have been widely acknowledged. However, it is not feasible to manipulate granulation via direct addition of AHL chemicals or AHL-producing strains. Here, several strains with high AHL-producing capacity were successfully isolated from AGS. These QS strains were cultivated, mixed as a consortium, and then divided into two groups: AHLs supernatant and bacterial cells encapsulated in sodium alginate (CEBs). The potential of QS regulation, via doses of AHLs supernatant and CEBs, in accelerating granulation was evaluated. Results clearly indicated that short-term (days 21-70) addition of AHLs supernatant led to a rapid specific growth rate (0.08 d^-1), compact structure without filamentous bacteria overgrowth, excellent settlement performance (SVI₁₀ 37.2 mL/g), and a high integrity coefficient (4.4%) of the granules. Sustainable release of AHLs (mainly C₆- and C₈-HSL) was induced by exogenous AHLs, possibly attributed to the enrichment of the genera Aeromonas and Pseudomonas. Further, tryptophan and aromatic protein substances were produced to maintain structural stability, suggesting that short-term QS regulation had long-term positive effects on the characteristics of AGS. By comparison, the addition of CEBs posed negligible or negative impact on the granulation, as evidenced by the rupture of smaller aggregates and poor characteristics of AGS. Overall, augmentation of the signaling content via addition of AHLs supernatant from QS strains is an economical and feasible regulation strategy to accelerate granulation and sustain long-term structural stability.

Performance and microbial characterization of aerobic granular sludge in a sequencing batch reactor performing simultaneous nitrification, denitrification and phosphorus removal with varying C/N ratios

The mechanism and effect of C/N ratios on the aerobic granules simultaneous nitrification, denitrification and phosphorus removal (SNDPR) system are still unclear. The reactor performance and microbial community dynamics of the system were investigated under variable C/N ratios (20, 10 and 5). The COD, TP and NH₄⁺-N removal remained unaffected with variable C/N ratios. The decreased C/N ratio of five strongly influenced the nitrogen removal. Further investigations revealed that Candidatus_Accumulibacter, Acinetobacter, Candidatus_Competibacter were the predominant genera. Classification of key groups involved in nitrogen and phosphorus removal indicated the lowest C/N ratio resulting in a large microbial community shift. This study might contribute to the application of SNDPR system for the treatment of wastewater. Different C/N ratios led to shift on the microbial community and the dominant was phosphorus-accumulating bacteria. The nitrogen removal efficiency decreased while the removal of COD, TP and NH₄⁺-N remained remarkable with the decreased C/N ratios.

Impact of hydraulic retention time and organic matter concentration on side-stream aerobic granular membrane bioreactor

This study investigated the effect of hydraulic retention time (HRT) and chemical oxygen demand (COD) concentration on membrane fouling in aerobic granular membrane bioreactor (AGMBR) in a systematic approach. Changes in HRT (7, 10, and 15 h) and COD (500, 1000 and 1500 mg/L) were applied in five operational phases, to determine the most significant parameters to control membrane fouling for enhanced AGMBR performance. Membrane permeability loss was dramatically intensified with increase in HRT from 7.5 to 15 h and COD from 500 to 1000 mg/L. The highest polysaccharide content of loosely bound EPS (0.41 mg PS/mg VSS) and soluble microbial products (SMPs) (27 mg PS/L) occurred alongside poor AGMBR performance. Variations in membrane fouling were accompanied with considerable changes in Flavobacterium, Thauera and Paracoccus populations. Analysis of variance (ANOVA) demonstrated that HRT and interaction between HRT and COD were the most significant parameters in controlling membrane fouling.

Continuous-flow aerobic granulation in plug-flow bioreactors fed with real domestic wastewater

This pilot study was designed to explore the feasibility of achieving successful aerobic granulation in continuous flow infrastructure like that existing in modern wastewater treatment plants (WWTPs). Results demonstrated that aerobic granulation of activated sludge can be achieved in plug-flow reactors (PFRs) fed with primary effluent from a domestic WWTP with seasonal temperature variation between 10 and 22.5 °C. It took about 90 days during the reactor startup to reach a state of sustained aerobic granulation. The characteristics of aerobic granules formed were comparable to those measured in sequential batch reactors (SBRs). The feast-to-famine concentration profiles measured in the plug-flow pilot reactors were found to be in line with those present in the full-scale treatment trains, lending support to the feasibility of converting existing infrastructure to continuous flow aerobic granulation systems. A selection pressure based on settling velocity (V_s) was applied in a V_s selector to retain bioparticles with V_s greater than ~9-9.75 m h^-1. It was theorized that an external V_s selection pressure would be necessary but would not be the sole condition sufficient to drive aerobic granulation. The alternating feast-to-famine internal selection provided by the PFRs is also believed to be a required condition to transform biomass from flocs toward dense and compact aerobic granules. While the pilot-scale Plug-flow Aerobic Granulation (PAG) reactor achieved similar COD and NH₃ removal efficiencies as the full-scale WWTP treatment train, its effluent from V_s selector contained an average of 138 mg L^-1 total suspended solids (TSS) as a result of the biomass 'wash-out" by the V_s selection pressure. Pilot results suggest a second clarifier for polishing, in addition to the V_s selector, may be needed in a full-scale application of the technique unless other downstream processes (flocculation, sedimentation, filtration) are provided to reach final water quality goals.

Enhanced aerobic granulation by inoculating dewatered activated sludge under short settling time in a sequencing batch reactor

The effect of dewatered activated sludge on aerobic granulation was investigated in a sequencing batch reactor (SBR) under short settling time. The results showed that dewatered sludge accelerated aerobic granulation and the granulation was completed within 5 days. On day 5, the aerobic granules were regular, compact, fast-settling and high granular strength and possessed excellent removal performance of carbon and nitrogen. The change trend of extracellular polymeric substances (EPS) was basically consistent with granular strength and granulation rate, indicating that EPS in granules played a vital function for granulation. Microbial community succession was investigated by pyrosequencing. In 5 days, microbial diversity was reduced and certain strains were rapidly enriched in the granules to become dominant species, serving on a crucial role in rapid granulation and pollutant removal as they could secrete excess EPS and possess the excellentability removing carbon and nitrogen pollutants.

Enhanced adsorption of Zn2+ by salinity-aided aerobic granular sludge: Performance and binding mechanism

Aerobic granular sludge (AGS), which is formed by closely associating microorganisms through the production of extracellular polymeric substances (EPS), has proved to be an excellent and promising biosorbent. The reutilization of excess AGS as a kind of biosorbent would be an environmental-friendly means for heavy metal removal and reutilization of excess AGS. In this study, short-term exposure experiments were conducted to determine whether salinity (NaCl concentration ranged from 0 to 50 g/L) caused positive effects on Zn²⁺ adsorption performance by AGS. The results showed that the AGS formed in response to a 30 g/L saline treatment exhibited the best adsorption performance. Compared with the control (salinity of 0 g/L), the adsorptive capacity at equilibrium increased by 19.90% and reached 29.76 mg/g. The calculated maximum adsorption capacity in 30 g/L saline treatment group was 73.94 mg/g which was higher than described in previous studies using biochar, clarified sludge and aerobic granules. Analysis of EPS components suggested the enhanced adsorption of AGS might be ascribed to increasing polysaccharides content in the EPS after saline treatments. Additionally, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) results indicated hydroxyl groups of EPS played an important role in Zn²⁺ binding. These findings provide further insight into the application of AGS for heavy metal adsorption.