Ionic liquids for regulating biocatalytic process: Achievements and perspectives

Hyper strength, high sensitivity integrated wearable signal sensor based on non-covalent interaction of an ionic liquid and bacterial cellulose for human behavior monitoring

Ion-sensing hydrogels exhibit electrical conductivity, softness, and mechanical and sensory properties akin to human tissue, rendering them an ideal material for mimicking human skin. In the realm of fabricating sensors for detecting human physiological activities, they present an ideal alternative to traditional rigid metal conductors. Nevertheless, achieving ionic hydrogels with outstanding tensile properties, toughness, ionic conductivity, and transport stability poses a significant challenge. This paper describes a simple method of forming a basic network by free radical polymerization of acrylamide, and then bacterial cellulose (BC) and 1-ethyl-3-methylimidazolium chloride ([EMIM]Cl) were introduced into the basic network. The polyhydrogen bonds and electrostatic interactions in the system gave the hydrogel notable tensile properties (3271 ± 37%), toughness (7.39 ± 0.13 MJ m-3), and high ultimate tensile stress (385.1 ± 7.2 kPa). In addition, the combination of BC and [EMIM]Cl collaboratively enhanced the mechanical properties and electrical conductivity. Ion sensing hydrogels have a wide operating strain range (≈1000%) and high sensitivity (gage factor (GF) = 11.85), and are therefore considered promising candidates for next-generation gel-based strain sensor platforms.

Do Ionic Liquids Exhibit the Required Characteristics to Dissolve, Extract, Stabilize, and Purify Proteins? Past-Present-Future Assessment

Proteins are highly labile molecules, thus requiring the presence of appropriate solvents and excipients in their liquid milieu to keep their stability and biological activity. In this field, ionic liquids (ILs) have gained momentum in the past years, with a relevant number of works reporting their successful use to dissolve, stabilize, extract, and purify proteins. Different approaches in protein-IL systems have been reported, namely, proteins dissolved in (i) neat ILs, (ii) ILs as co-solvents, (iii) ILs as adjuvants, (iv) ILs as surfactants, (v) ILs as phase-forming components of aqueous biphasic systems, and (vi) IL-polymer-protein/peptide conjugates. Herein, we critically analyze the works published to date and provide a comprehensive understanding of the IL-protein interactions affecting the stability, conformational alteration, unfolding, misfolding, and refolding of proteins while providing directions for future studies in view of imminent applications. Overall, it has been found that the stability or purification of proteins by ILs is bispecific and depends on the structure of both the IL and the protein. The most promising IL-protein systems are identified, which is valuable when foreseeing market applications of ILs, e.g., in "protein packaging" and "detergent applications". Future directions and other possibilities of IL-protein systems in light-harvesting and biotechnology/biomedical applications are discussed.

Enhanced stability and catalytic performance of laccase immobilized on magnetic graphene oxide modified with ionic liquids

Graphite oxide (GO) is an excellent laccase immobilization material. However, the electrostatic interaction between graphene leads to the accumulation of GO, as well as the interaction with the surface of enzyme molecules causing protein denaturation and deactivation, which limits its further industrial application. In this study, the ionic liquids (ILs) modification strategy was proposed to improve the stability and catalytic performance of immobilized laccase. The laccase-ILs-MGO exhibited remarkable enzymatic properties, with significant enhancements in organic solvent tolerance, thermal and operational stability. The laccase-ILs-MGO system exhibited a remarkable removal efficiency of 95.5% towards 2,4-dichlorophenol (2,4-DCP) within 12 h and maintained over 70.0% removal efficiency after seven reaction cycles. In addition, the efficient elimination of other phenolic compounds and recalcitrant polycyclic aromatic hydrocarbons could also be accomplished. Molecular dynamics simulation and molecular docking studies demonstrated that immobilized laccase exhibited superior structural rigidity and stronger hydrogen bond interactions with substrates compared to free laccase, which was beneficial for the stability of both the laccase and substrate degradation efficiency. Therefore, this study proposed a simple and practical strategy for modifying GO with ILs, providing novel insights into developing efficient enzyme immobilization techniques.

Supramolecular Ionic Liquid Gels for Enzyme Entrapment

Reported herein is an entrapment method for enzyme immobilization that does not require the formation of new covalent bonds. Ionic liquid supramolecular gels are formed containing enzymes that can be shaped into gel beads and act as recyclable immobilized biocatalysts. The gel was formed from two components, a hydrophobic phosphonium ionic liquid and a low molecular weight gelator derived from the amino acid phenylalanine. Gel-entrapped lipase from Aneurinibacillus thermoaerophilus was recycled for 10 runs over 3 days without loss of activity and retained activity for at least 150 days. The procedure does not form covalent bonds upon gel formation, which is supramolecular, and no bonds are formed between the enzyme and the solid support.

Formation and Surface Behavior of Pt and Pd Complexes with Ligand Systems Derived from Nitrile-functionalized Ionic Liquids Studied by XPS

We studied the formation and surface behavior of Pt(II) and Pd(II) complexes with ligand systems derived from two nitrile-functionalized ionic liquids (ILs) in solution using angle-resolved X-ray photoelectron spectroscopy (ARXPS). These ligand systems enabled a high solubility of the metal complexes in IL solution. The complexes were prepared by simple ligand substitution under vacuum conditions in defined excess of the coordinating ILs, [C₃ CNC₁ Im][Tf₂ N] and [C₁ CNC₁ Pip][Tf₂ N], to immediately yield solutions of the final products. The ILs differ in the cationic head group and the chain length of the functionalized substituent. Our XPS measurements on the neat ILs gave insights in the electronic properties of the coordinating substituents revealing differences in donation capability and stability of the complexes. Investigations on the composition of the outermost surface layers using ARXPS revealed no surface affinity of the nitrile-functionalized chains in the neat ILs. Solutions of the formed complexes in the nitrile ILs showed homogeneous distribution of the solute at the surface with the heterocyclic moieties preferentially orientated towards the vacuum, while the metal centers are rather located further away from the IL/vacuum interface.

Surface Modification of Magnetic ZIF-90 Nanoparticles Improves the Microenvironment of Immobilized Lipase and Its Application in Esterification

Interactions of enzymes with supports significantly affect the activity and stability of immobilized enzymes. Herein, amino-functionalized ionic liquid (IL)-grafted magnetic zeolitic imidazolate framework-90 (MZIF-90) was prepared and used to immobilize porcine pancreatic lipase (PPL). The nanocomposites were fully characterized; meanwhile, the interactions between ILs and ZIF-90 were calculated based on density functional theory. The prepared biocatalyst (PPL-ILs/MZIF-90) had a lipase loading of 178.3 mg/g and hydrolysis activity up to 287.5 U/g. When the biocatalyst was used to synthesize isoamyl acetate, the reaction media, molar ratio of alcohol/acid, temperature, and reaction time were optimized. Under the optimized reaction conditions (in hexane, alcohol/acid = 3:1, under 45 °C, reacted for 9 h), the ester yield reached 85.5%. The results of the stability test showed that PPL-ILs/MZIF-90 retained 88.7% of the initial activity after storing for 35 days and 92.5% of the initial activity after reusing for seven cycles for synthesizing isoamyl acetate. Moreover, the secondary structure analysis showed that the synthesized supports protected the active conformation of immobilized lipase, which lead to the enhanced catalytic performance. Additionally, the biocatalyst can be easily separated with a magnet, which facilitated the reusability. This study provides insights regarding the application of metal organic framework composites in the field of enzyme catalysis.

The Utilization of Two-Phase Catalytic System in Enantioselective Biotransformation of Racemic Atenolol

There are several methods that allow enantiomerically pure compounds to be obtained. In the study presented herein, the enantioselective biotransformations of (R,S)-atenolol were performed with the use of various catalytic systems containing ionic liquids and toluene as a reaction medium, vinyl acetate as an acetylating agent as well as lipases from Candida rugosa. The conducted studies profs that, the use of the two-phase reaction system enables the reuse of the biocatalyst in another cycle and allows to achieve satisfactory kinetic resolution parameters.

First Evidence of the Double-Bond Formation by Deoxydehydration of Glycerol and 1,2-Propanediol in Ionic Liquids

Deoxydehydration (DODH) reaction of glycerol (GL) and 1,2-propanediol (1,2-PD), in ionic liquids (ILs), catalyzed by methyltrioxorhenium (MTO) and Re₂O₇, was studied in detail. To better understand the ability of ILs to improve the catalytic performance of the rhenium catalyst, several experiments, employing eight different cations and two different anions, were carried out. Among the anions, bis(trifluoromethylsulfonyl)imide (TFSI) appears to be more appropriate than PF₆ ^-, for its relatively lower volatility of the resulting IL. Regarding the choice of the most appropriate cation, the presence of a single aromatic ring seems to be a necessary requirement for a satisfying and convenient reactivity. With the aim to extend the recyclability of the catalyst, experiments involving the readdition of polyol to the terminal reaction mixture were carried out. Worthy of interest is the fact that the presence of the IL prevents the inertization process of the catalyst, allowing us to obtain the alkene also after a readdition of fresh polyol.

Recovery of the N,N-Dibutylimidazolium Chloride Ionic Liquid from Aqueous Solutions by Electrodialysis Method

Ionic liquids (ILs), named also as liquid salts, are compounds that have unique properties and molecular architecture. ILs are used in various industries; however, due to their toxicity, the ILs’ recovery from the postreaction solutions is also a very important issue. In this paper, the possibility of 1,3-dialkylimidazolium IL, especially the N,N-dibutylimidazolium chloride ([C₄C₄IM]Cl) recovery by using the electrodialysis (ED) method was investigated. The influence of [C₄C₄IM]Cl concentration in diluate solution on the ED efficiency was determined. Moreover, the influence of IL on the ion-exchange membranes’ morphology was examined. The recovery of [C₄C₄IM]Cl, the [C₄C₄IM]Cl flux across membranes, the [C₄C₄IM]Cl concentration degree, the energy consumption, and the current efficiency were determined. The results showed that the ED allows for the [C₄C₄IM]Cl recovery and concentration from dilute solutions. It was found that the [C₄C₄IM]Cl content in the concentrates after ED was above three times higher than in the initial diluate solutions. It was noted that the ED of solutions containing 5–20 g/L [C₄C₄IM]Cl allows for ILs recovery in the range of 73.77–92.45% with current efficiency from 68.66% to 92.99%. The [C₄C₄IM]Cl recovery depended upon the initial [C₄C₄IM]Cl concentration in the working solution. The highest [C₄C₄IM]Cl recovery (92.45%) and ED efficiency (92.99%) were obtained when the [C₄C₄IM]Cl content in the diluate solution was equal 20 g/L. Presented results proved that ED can be an interesting and effective method for the [C₄C₄IM]Cl recovery from the dilute aqueous solutions.

Ionic Liquid-Assisted Fabrication of Bioactive Heterogeneous Magnetic Nanocatalyst with Antioxidant and Antibacterial Activities for the Synthesis of Polyhydroquinoline Derivatives

Antibacterial materials have obtained much attention in recent years due to the presence of hazardous agents causing oxidative stress and observation of pathogens. However, materials with antioxidant and antibacterial activities can cause toxicity due to their low biocompatibility and safety profile, urging scientists to follow new ways in the synthesis of such materials. Ionic liquids have been employed as a green and environmentally solvent for the fabrication of electrically conductive polymers. In the present study, an antibacterial poly(p-phenylenediamine)@Fe₃O₄ (PpPDA@Fe₃O₄) nanocomposite was fabricated using [HPy][HSO₄] ionic liquid. The chemical preparation of PpPDA@Fe₃O₄ nanocomposite was initiated through the oxidative polymerization of p-phenylenediamine by ammonium persulfate in the presence of [HPy][HSO₄]. The PpPDA@Fe₃O₄ nanocomposite exhibited antibacterial properties against Gram-negative (Escherichia coli) and Gram-positive (Bacillus subtilis) bacteria. The PpPDA@Fe₃O₄ nanocomposite was employed as a heterogeneous nanocatalysis for one-pot synthesis of polyhydroquinoline derivatives using aromatic aldehyde, dimedone, benzyl acetoacetate, and ammonium acetate. Polyhydroquinoline derivatives were synthesized in significant yields (90–97%) without a difficult work-up procedure in short reaction times. Additionally, PpPDA@Fe₃O₄ nanocatalyst was recycled for at least five consecutive catalytic runs with a minor decrease in the catalytic activity. In this case, 11 derivatives of polyhydroquinoline showed in vitro antioxidant activity between 70–98%.

Perspectives in the Computational Modeling of New Generation, Biocompatible Ionic Liquids

In this Perspective, I review the current state of computational simulations on ionic liquids with an emphasis on the recent biocompatible variants. These materials are used here as an example of relatively complex systems that highlights the limits of some of the approaches commonly used to study their structure and dynamics. The source of these limits consists of the coexistence of nontrivial electrostatic, many-body quantum effects, strong hydrogen bonds, and chemical processes affecting the mutual protonation state of the constituent molecular ions. I also provide examples on how it is possible to overcome these problems using suitable simulation paradigms and recently improved techniques that, I expect, will be gradually introduced in the state-of-the-art of computational simulations of ionic liquids.

Protein Modifications: From Chemoselective Probes to Novel Biocatalysts

Chemical reactions can be performed to covalently modify specific residues in proteins. When applied to native enzymes, these chemical modifications can greatly expand the available set of building blocks for the development of biocatalysts. Nucleophilic canonical amino acid sidechains are the most readily accessible targets for such endeavors. A rich history of attempts to design enhanced or novel enzymes, from various protein scaffolds, has paved the way for a rapidly developing field with growing scientific, industrial, and biomedical applications. A major challenge is to devise reactions that are compatible with native proteins and can selectively modify specific residues. Cysteine, lysine, N-terminus, and carboxylate residues comprise the most widespread naturally occurring targets for enzyme modifications. In this review, chemical methods for selective modification of enzymes will be discussed, alongside with examples of reported applications. We aim to highlight the potential of such strategies to enhance enzyme function and create novel semisynthetic biocatalysts, as well as provide a perspective in a fast-evolving topic.

Challenges and Recent Advances in Enzyme-Mediated Wastewater Remediation-A Review

Different classes of artificial pollutants, collectively called emerging pollutants, are detected in various water bodies, including lakes, rivers, and seas. Multiple studies have shown the devastating effects these emerging pollutants can have on human and aquatic life. The main reason for these emerging pollutants in the aquatic environment is their incomplete removal in the existing wastewater treatment plants (WWTPs). Several additional treatments that could potentially supplement existing WWTPs to eliminate these pollutants include a range of physicochemical and biological methods. The use of enzymes, specifically, oxidoreductases, are increasingly being studied for their ability to degrade different classes of organic compounds. These enzymes have been immobilized on different supports to promote their adoption as a cost-effective and recyclable remediation approach. Unfortunately, some of these techniques have shown a negative effect on the enzyme, including denaturation and loss of catalytic activity. This review focuses on the major challenges facing researchers working on the immobilization of peroxidases and the recent progress that has been made in this area. It focuses on four major areas: (1) stability of enzymes upon immobilization, enzyme engineering, and evolution; (2) recyclability and reusability, including immobilization on membranes and solid supports; (3) cost associated with enzyme-based remediation; and (4) scaling-up and bioreactors.