Microalgal-bacterial aggregates for wastewater treatment: A mini-review

Native Microalgae-Bacteria Consortia: A Sustainable Approach for Effective Urban Wastewater Bioremediation and Disinfection

Urban wastewater is a significant by-product of human activities. Conventional urban wastewater treatment plants have limitations in their treatment, mainly concerning the low removal efficiency of conventional and emerging contaminants. Discharged wastewater also contains harmful microorganisms, posing risks to public health, especially by spreading antibiotic-resistant bacteria and genes. Therefore, this study assesses the potential of a native microalgae-bacteria system (MBS) for urban wastewater bioremediation and disinfection, targeting NH4+-N and PO43--P removal, coliform reduction, and antibiotic resistance gene mitigation. The MBS showed promising results, including a high specific growth rate (0.651 ± 0.155 d-1) and a significant average removal rate of NH4+-N and PO43--P (9.05 ± 1.24 mg L-1 d-1 and 0.79 ± 0.06 mg L-1 d-1, respectively). Microalgae-induced pH increase rapidly reduces coliforms (r > 0.9), including Escherichia coli, within 3 to 6 days. Notably, the prevalence of intI1 and the antibiotic resistance genes sul1 and blaTEM are significantly diminished, presenting the MBS as a sustainable approach for tertiary wastewater treatment to combat eutrophication and reduce waterborne disease risks and antibiotic resistance spread.

Metagenomic analysis of microbial consortia native to the Amazon, Highlands, and Galapagos regions of Ecuador with potential for wastewater remediation

Native microbial consortia have been proposed for biological wastewater treatment, but their diversity and function remain poorly understood. This study investigated three native microalgae-bacteria consortia collected from the Amazon, Highlands, and Galapagos regions of Ecuador to assess their metagenomes and wastewater remediation potential. The consortia were evaluated for 12 days under light (LC) and continuous dark conditions (CDC) to measure their capacity for nutrient and organic matter removal from synthetic wastewater (SWW). Overall, all three consortia demonstrated higher nutrient removal efficiencies under LC than CDC, with the Amazon and Galapagos consortia outperforming the Highlands consortium in nutrient removal capabilities. Despite differences in α- and β-diversity, microbial species diversity within and between consortia did not directly correlate with their nutrient removal capabilities. However, all three consortia were enriched with core taxonomic groups associated with wastewater remediation activities. Our analyses further revealed higher abundances for nutrient removing microorganisms in the Amazon and Galapagos consortia compared with the Highland consortium. Finally, this study also uncovered the contribution of novel microbial groups that enhance wastewater bioremediation processes. These groups have not previously been reported as part of the core microbial groups commonly found in wastewater communities, thereby highlighting the potential of investigating microbial consortia isolated from ecosystems of megadiverse countries like Ecuador.

Microalgae systems - environmental agents for wastewater treatment and further potential biomass valorisation

Water is the most valuable resource on the planet. However, massive anthropogenic activities generate threatening levels of biological, organic, and inorganic pollutants that are not efficiently removed in conventional wastewater treatment systems. High levels of conventional pollutants (carbon, nitrogen, and phosphorus), emerging chemical contaminants such as antibiotics, and pathogens (namely antibiotic-resistant ones and related genes) jeopardize ecosystems and human health. Conventional wastewater treatment systems entail several environmental issues: (i) high energy consumption; (ii) high CO₂ emissions; and (iii) the use of chemicals or the generation of harmful by-products. Hence, the use of microalgal systems (entailing one or several microalgae species, and in consortium with bacteria) as environmental agents towards wastewater treatment has been seen as an environmentally friendly solution to remove conventional pollutants, antibiotics, coliforms and antibiotic resistance genes. In recent years, several authors have evaluated the use of microalgal systems for the treatment of different types of wastewater, such as agricultural, municipal, and industrial. Generally, microalgal systems can provide high removal efficiencies of: (i) conventional pollutants, up to 99%, 99%, and 90% of total nitrogen, total phosphorus, and/or organic carbon, respectively, through uptake mechanisms, and (ii) antibiotics frequently found in wastewaters, such as sulfamethoxazole, ciprofloxacin, trimethoprim and azithromycin at 86%, 65%, 42% and 93%, respectively, through the most desirable microalgal mechanism, biodegradation. Although pathogens removal by microalgal species is complex and very strain-specific, it is also possible to attain total coliform and Escherichia coli removal of 99.4% and 98.6%, respectively. However, microalgal systems' effectiveness strongly relies on biotic and abiotic conditions, thus the selection of operational conditions is critical. While the combination of selected species (microalgae and bacteria), ratios and inoculum concentration allow the efficient removal of conventional pollutants and generation of high amounts of biomass (that can be further converted into valuable products such as biofuels and biofertilisers), abiotic factors such as pH, hydraulic retention time, light intensity and CO₂/O₂ supply also have a crucial role in conventional pollutants and antibiotics removal, and wastewater disinfection. However, some rationale must be considered according to the purpose. While alkaline pH induces the hydrolysis of some antibiotics and the removal of faecal coliforms, it also decreases phosphates solubility and induces the formation of ammonium from ammonia. Also, while CO₂ supply increases the removal of E. coli and Pseudomonas aeruginosa, as well as the microalgal growth (and thus the conventional pollutants uptake), it decreases Enterococcus faecalis removal. Therefore, this review aims to provide a critical review of recent studies towards the application of microalgal systems for the efficient removal of conventional pollutants, antibiotics, and pathogens; discussing the feasibility, highlighting the advantages and challenges of the implementation of such process, and presenting current case-studies of different applications of microalgal systems.

Characteristics of algal-bacterial aerobic granular sludge treating real wastewater: Effects of algal inoculation and alginate-like exopolymers recovery

Limited information is available on the characteristics of algal-bacterial aerobic granular sludge (AGS) treating real wastewater, especially on its alginate-like exopolymers (ALE) production. In addition, the effect of target microalgae species inoculation on the system performance has not been fully understood. This study aimed to reveal the effect of microalgae inoculation on the characteristics of algal-bacterial AGS and its ALE production potential. Two photo-sequencing batch reactors (PSBR) were employed, namely R1 with activated sludge and R2 with Tetradesmus sp. and activated sludge being inoculated, respectively. Both reactors were fed with locally sourced municipal wastewater and operated for 90 days. Algal-bacterial AGS were successfully cultivated in both reactors. No significant difference was observed between the performances of R1 and R2, reflecting that the inoculation of target microalgae species may not be crucial for the development of algal-bacterial AGS when treating real wastewater. Both reactors achieved an ALE yield of about 70 mg/g of volatile suspended solids (VSS), indicating that a substantial amount of biopolymer can be recovered from wastewater. Interestingly, boron was detected in all the ALE samples, which might contribute to granulation and interspecies quorum sensing. The enrichment of lipids content in ALE from algal-bacterial AGS treating real wastewater reveals its high resource recovery potential. Overall, the algal-bacterial AGS system is a promising biotechnology for simultaneous municipal wastewater treatment and resource (like ALE) recovery.

Enhanced alginate-like exopolymers recovery from algal-bacterial aerobic granular sludge: Optimal cultivation condition and contribution of bacteria and microalgae during the transport/storage period

Extracting alginate-like exopolymers (ALE) is a promising approach for valuable resources recovery from excess algal-bacterial aerobic granular sludge (AGS) to achieve circular bioeconomy and environmental sustainability in wastewater treatment plants (WWTPs). In this study, six batch cultivation tests were conducted to investigate the optimal cultivation duration or transport/storage period, light intensity, and temperature for algal-bacterial AGS after sampling and before further processing or ALE extraction. At a light intensity of 5 klux, the highest ALE content (36.33 mg/g-VSS) was detected at a low temperature of 10°C, which increased by 300% from its original level after 6-h cultivation. Results from levofloxacin (LVX) exposure and dark condition imply that microalgae contributed more to ALE synthesis in the algal-bacterial granules. This work not only provides a better understanding of the mechanisms involved in ALE biosynthesis but also offers useful guidance for maintaining or improving ALE recovery after algal-bacterial biomass sampling.

Buffered loofah supported Microalgae-Bacteria symbiotic (MBS) system for enhanced nitrogen removal from rare earth element tailings (REEs) wastewater: Performance and functional gene analysis

Rare earth element tailings (REEs) wastewater, which has the characteristics of high ammonia nitrogen (NH₄⁺-N) and low COD. It can cause eutrophication and biotoxicity in water which is produced in high volumes, requiring treatment before final disposal. Microalgae-Bacteria symbiotic (MBS) system can be applied in REEs wastewater, but its low extent of nitrogen removal and instability limit its application. By adding biodegradable carrier as both carbon source and carrier, the system can be stabilized and the efficiency can be improved. In this work, the extent of NH₄⁺-N removal reached 100% within 24 h in a MBS system after adding loofah under optimal conditions, and the removal rate reached 127.6 mg NH₄⁺-N·L^-1·d^-1. In addition, the carbon release from loofah in 3 d reached 408.7 mg/L, which could be used as a carbon source to support denitrification. During 90 d of operation of the MBS system loaded with loofah, the effluent NH₄⁺-N was less than 15 mg/L. At phylum level, Proteobacteria were dominant which accounted for 78.2%. Functional gene analysis showed that enhancement of microalgae assimilation was the main factor affecting NH₄⁺-N removal. This work expands our understanding of the enhanced role of carbon-based carriers in the denitrification of REEs wastewater.

Algal-bacterial aerobic granular sludge for real municipal wastewater treatment: Performance, microbial community change and feasibility of lipid recovery

Despite various research works on algal-bacterial aerobic granular sludge for wastewater treatment and resource recovery processes, limited information is available on its application in real wastewater treatment in terms of performance, microbial community variation and resource recovery. This study investigated the performance of algal-bacterial aerobic granular sludge on real low-strength wastewater treatment in addition to the characterization of microbial community and fatty acid compositions for biodiesel production. The results demonstrated 71% COD, 77% NH₄⁺-N and 31% phosphate removal efficiencies, respectively. In addition, all the water parameters successfully met the effluent standard A, imposed by the Department of Environment (DOE) Malaysia. Core microbiome analyses revealed important microbial groups (i.e., Haliangium ochraceum, Burkholderiales and Chitinophagaceae) in bacterial community. Meanwhile the photosynthetic microorganisms, such as Oxyphotobacteria and Trebouxiophyceae dominated the algal-bacterial aerobic granular sludge, suggesting their important roles in granulation and wastewater treatment. Up to 12.51 mg/gSS lipid content was recovered from the granules. In addition, fatty acids composition showed high percetages of C16:0 and C18:0, demonstrating high feasibility to be used for biodiesel production application indicated by the cetane number, iodine value and oxidation stability properties.

Strategy for the formation of microalgae-bacteria aggregates in high-rate algal ponds

This work studied the formation of aggregates used for wastewater treatment in high-rate algal ponds (HRAP). For this, the establishment of microalgae-bacteria aggregates in these systems was evaluated, considering strategies for the inoculation and start-up. Two HRAP were operated in parallel, at first in batch mode and then in continuous flow. The wastewater treatment was efficient, with removal rates around 80% for COD and N-ammoniacal. Volatile suspended solids and chlorophyll for the culture grew continuously reached a concentration of 548 ± 11 mg L^-1 and 7.8 mg L^-1, respectively. Larger photogranules were observed when the system was placed in a continuous regime. The protein fraction of extracellular polymeric substances was identified as a determinant in photogranules formation. During the continuous regime, more than 50% of the biomass was higher than 0.2 mm, flocculation efficiency of 78 ± 6%, and the volumetric sludge index of 32 ± 5 mL g^-1. The genetic sequencing showed the growth of cyanobacteria in the aggregate and the presence of microalgae from the chlorophytes and diatoms groups in the final biomass.

Interaction of Scenedesmus quadricauda and native bacteria in marine biopharmaceutical wastewater for desirable lipid production and wastewater treatment

Improving knowledge of the alga-bacterium interaction can promote the wastewater treatment. The untreated marine biopharmaceutical wastewater (containing native bacteria) was used directly for culturing microalgae. Unlike previous studies on specific bacteria in algal-bacterial co-culture systems, the effect of native bacteria in wastewater on microalgae growth was investigated in this study. The results showed that the coexistence of native bacteria greatly promoted the microalgae growth, ultimately producing biomass of 0.64 g/L and biomass productivity of 56.18 mg/L·d. Moreover, the lipid accumulation in the algae + bacteria group was 1.31 and 1.13 times higher than those of BG11 and pure algae, respectively, mainly attributed to the fact that bacteria provided a good environment for microalgae growth by using extracellular substances released from microalgae for their own growth, and providing micromolecules of organic matter and other required elements to microalgae. This study would lay the theoretical foundation for improving biopharmaceutical wastewater treatment.

Influence of inoculation ratio on the performance and microbial community of bacterial-algal symbiotic system for rural wastewater treatment

In this study, co-culture of microalgae and activated sludge in photobioreactors (PBRs) was investigated at different inoculation ratios (0:1, 0.3:1, 0.7:1, and 1.3:1 sludge wt./algae wt.) for rural domestic wastewater treatment under direct solar radiation. Effluent qualities (such as pH, NO₂ ^- , PO₄ ^3- , and NH₄ ⁺ -N concentrations) were assessed; bacterial and microalgal communities in co-culture system were compared. The microalgal and bacterial biomass fraction played a significant role in the performance and microbial community structure of the treatment system. In reactors with inoculation ratio of 0.3:1 and 0.7:1, the pH exceeded 9 or 10 under solar radiation, which led to some functional bacteria being missing. In the reactor with inoculation ratio of 1.3:1, activated sludge effectively prevented excessive increase in pH in the reactor. Similar observations were made for reactors with inoculation ratios below 1.3:1 by adding sludge halfway through the process. The results show that activated sludge can inhibit excessive increase in pH caused by algal photosynthesis, maintain the activity of nitrite-oxidizing bacteria in PBR, and reduce algae loss with the effluent. PRACTITIONER POINTS: Appropriate fraction of activated sludge can effectively inhibit the excessive increase in pH caused by algal photosynthesis in PBR. Adding activated sludge could maintain the activity of nitrite-oxidizing bacteria in PBR, and reduce microalgae loss with the effluent. Considering the stability of operation and biodiversity in PBR, a 1.3:1 inoculation ratio of activated sludge and microalgae is preferred.

Optimization of Microalgae–Bacteria Consortium in the Treatment of Paper Pulp Wastewater

The microalgae–bacteria consortium is a promising and sustainable alternative for industrial wastewater treatment, since it may allow good removal of organic matter and nutrients, as well as the possibility of producing products with added value from the algae biomass. This research investigated the best bacterial and microalgae inoculation ratio for system start-up and evaluation of removing organic matter (as chemical oxygen demand (COD)), ammoniacal nitrogen (NH4+–N), nitrite nitrogen (NO2−–N), nitrate nitrogen (NO3−–N), phosphate phosphorus (PO43−–P) and biomass formation parameters in six photobioreactors with a total volume of 1000 mL. Reactors were operated for 14 days with the following ratios of pulp mill biomass aerobic (BA) and Scenedesmus sp. microalgae (MA): 0:1 (PBR1), 1:0 (PBR2), 1:1 (PBR3), 3:1 (PBR4), 5:1 (PBR5), and 1:3 (PBR6). Results show that COD removal was observed in just two days of operation in PBR4, PBR5, and PBR6, whereas for the other reactors (with a lower rate of initial inoculation) it took five days. The PBR5 and PBR6 performed better in terms of NH4+–N removal, with 86.81% and 77.11%, respectively, which can be attributed to assimilation by microalgae and nitrification by bacteria. PBR6, with the highest concentration of microalgae, had the higher PO43−–P removal (86%), showing the advantage of algae in consortium with bacteria for phosphorus uptake. PBR4 and PBR5, with the highest BA, led to a better biomass production and sedimentability on the second day of operation, with flocculation efficiencies values over 90%. Regarding the formation of extracellular polymeric substances (EPS), protein production was substantially higher in PBR4 and PBR5, with more BA, with average concentrations of 49.90 mg/L and 49.05 mg/L, respectively. The presence of cyanobacteria and Chlorophyceae was identified in all reactors except PBR1 (only MA), which may indicate a good formation and structuring of the microalgae–bacteria consortium. Scanning electron microscopy (SEM) analysis revealed that filamentous microalgae were employed as a foundation for the fixation of bacteria and other algae colonies.

Calcium ions-effect on performance, growth and extracellular nature of microalgal-bacterial symbiosis system treating wastewater

Microalgal-bacterial symbiosis (MABS) system treating wastewater has attracted great concern because of its advantages of carbon dioxide reduction and biomass energy production. However, due to the low density and negative surface charge of microalgae cells, the sedimentation and harvesting performance of microalgae biomass has been one limitation for the application of MABS system on wastewater treatment. This study investigated the performance enhancement of microalgae harvesting and wastewater treatment contributed by calcium ions (i.e., Ca²⁺) in the MABS system. Results showed that a low Ca²⁺ loading (i.e., 0.1 mM) promoted both COD and nutrients removal, with growth rates of 11.95, 6.53 and 1.21% for COD, TN and TP compared to control, and chlorophyll a was increased by 64.15%. Differently, a high Ca²⁺ loading (i.e., 10 mM) caused removal reductions by improving the aggregation of microalgae, with reduction rates of 34.82, 3.50 and 10.30% for COD, NH₄⁺-N and TP. Mechanism analysis indicated that redundant Ca²⁺ adsorbed on MABS aggregates and dissolved in wastewater decreased the dispersibility of microalgae cells by electrical neutralization and compressed double electric layer. Moreover, the presence of Ca²⁺ could improve extracellular secretions and promoted flocculation performance, with particle size increasing by 336.22%. The findings of this study may provide some solutions for the enhanced microalgae biomass harvest and nutrients removal from wastewater.

Emerging biological wastewater treatment using microalgal-bacterial granules: A review

Aiming at deepening the understanding of the formation and evolution of emerging microalgal-bacterial granule (MBG)-based wastewater treatment systems, the recent advances regarding the formation processes, transfer phenomena, innovative bioreactors development and wastewater treatment performance of MBG-based systems are comprehensively reviewed in this work. Particularly, the successful establishments of MBG-based systems with various inocula are summarized. Besides, as the indispensable factors for biochemical reactions in MBGs, the light and substrates (organic matters, inorganic nutrients, etc) need to undergo complicated and multi-scale transfer processes before being assimilated by microorganisms within MBGs. Therefore, the involved transfer phenomena and mechanisms in MBG-based bioreactors are critically discussed. Subsequently, some recent advances of MBG-based bioreactors, the application of MBG-based systems in treating various synthetic and real wastewater, and the future development directions are discussed. In short, this review helps in promoting the development of MBG-based systems by presenting current research status and future perspectives.

Development of autotrophic and heterotrophic consortia via immobilized microbial beads for chemical wastewater treatment, using PTA wastewater as an approach

Studies on the symbiosis of microalgae-bacteria have been accelerating as a mean for wastewater remediation. However, there were few reports about the microalgae-bacteria consortia for chemical wastewater treatment. The aim of the present study is to develop an autotrophic and heterotrophic consortium for chemical wastewater treatment and probe whether and how bacteria could benefit from the microalgae during the treatment process, using PTA wastewater as an approach. A process-dependent strategy was applied. First of all, the results showed that the sludge beads with the sludge concentration of 30 g/L were the optimal one with the COD removal rate at 84.8% but the ceiling effect occurred (COD removal rate < 90%) even several common reinforcement methods were applied. Additionally, by adding the microalgae Chlorella vulgaris, a microalgae-activated sludge consortium was formed inside the immobilized beads, which provided better performance to shatter the ceiling effect. The COD remove rate was higher than 90%, regardless of the activated sludge was pre-culture or not. COD removal capacity could also be improved (COD removal rate > 92%) when LEDs light belt was offered as an advanced light condition. Biochemical assay and DNA analysis indicated that the microalgae could form an internal circulation of substances within the activated sludge and drove the microbial community to success and the corresponding gene functions, like metabolism and.

Laboratory trial and full-scale implementation of integrated anaerobic-aerobic treatment for high strength acrylic acid wastewater

Sustainable treatment of highly polluting industrial wastewaters poses a challenge to many municipalities. This study presented treatment of a high strength inhibitory acrylic acid wastewater by integrated anaerobic-aerobic processes. A novel scheme integrating anaerobic granular sludge blanket (GSB) reactor, aerobic carrier biofilm (CBR) reactor and activated sludge reactor (ASR) was tested. The laboratory trial showed that the GSB was able to degrade exceptionally high chemical oxygen demand (COD up to 32,420 mg/L) acrylic acid wastewater laden with 5% waste oil. Operated under a high volumetric loading (VLR) rate of 21.6 g/L·d, the integrated GSB-CBR-ASB achieved 99% of COD removal, of which 90% were removed by the anaerobic process and 9% by the aerobic processes. Full-scale implementation indicated comparable performance with overall removal up to 99%, thus meeting the discharge limits of 500 mg COD/L of public sewer. The integrated scheme was effective in which the anaerobic GSB functioning as a prime degrader that degraded most of the pollutants, while the aerobic CBR-ASB serving as a polisher that removed the remaining COD. With adequate microbial acclimation and granulation, the novel integrated scheme offers a resilient and robust treatment system for high strength inhibitory acrylic acid wastewater.

Co-culture of microalgae-activated sludge for wastewater treatment and biomass production: Exploring their role under different inoculation ratios

In this study, mixed culture (microalgae:activated sludge) of a photobioreactor (PBR) were investigated at different inoculation ratios (1:0, 9:1, 3:1, 1:1, 0:1 wt/wt). This work was not only to determine the optimal ratio for pollutant remediation and biomass production but also to explore the role of microorganisms in the co-culture system. The results showed high total biomass concentrations were obtained from 1:0 and 3:1 ratio being values of 1.06, 1.12 g L^-1, respectively. Microalgae played a dominant role in nitrogen removal via biological assimilation while activated sludge was responsible for improving COD removal. Compared with the single culture of microalgae, the symbiosis between microalgae and bacteria occurred at 3:1 and 1:1 ratio facilitated a higher COD removal by 37.5-45.7 %. In general, combined assessment based on treatment performance and biomass productivity facilitated to select an optimal ratio of 3:1 for the operation of the co-culture PBR.