A comprehensive clinical review of maxillary sinus floor elevation: anatomy, techniques, biomaterials and complications

Risk Factors for Implant Failure Following Transcrestal Sinus-Floor Elevation: A Case Report and Literature Review

Although transcrestal sinus floor elevation (TSFE) is widely used for cases of insufficient residual bone height in the posterior maxilla, few studies focus on the risk factors of early implant failure associated with TSFE procedures. This study aimed to identify and summarize the possible risk factors of implant failure associated with TSFE to ensure a more predictable implant survival rate using TSFE. We report the treatment of a patient with implant failure following TSFE and discuss this case's possible associated risk factors. A standard implant with a diameter of 4.8 mm and length of 10 mm was used after the TSFE procedure. Implant loosening was suddenly observed 6 weeks after the initial surgery. Factors that could result in early implant failure included patient-related risk factors, anatomical factors of the operational area, and operation- and implant-related factors. Within the current study's limitations, the graft material particles between the implant surface and socket could be considered a direct risk factor resulting in implant failure. Therefore, more attention should be paid to socket cleaning during the TSFE procedure, and loose particulate grafting materials should be discouraged. Another significant consideration for implant loss is the possibility of fractures in the buccal or palatal cortical plates during the site preparation and implant insertion. Thus, these factors should be studied further and receive more clinical attention.

Maxillary Dental Anatomy and Physiology: Endodontic and Periodontal

The maxillary sinus floor is formed by the alveolar process of the maxilla. Frequently, the roots of maxillary molars and premolars may protrude into the sinus cavity, with only a thin membrane separating them. Endodontic infections are characterized by mixed biofilms of anaerobic and proteolytic bacteria that can infect the root canal space and accessory anatomy of those teeth producing apical periodontitis. Due to the close relationship with the maxillary sinus, the persistence of apical periodontitis could potentially lead to odontogenic sinusitis. Understanding maxillary sinus anatomy and its relationship with the posterior maxillary dentition is crucial for diagnosing this entity.

Distribution of the intraosseous branch of the posterior superior alveolar artery relative to the posterior maxillary teeth

Purpose

Preoperative identification of the intraosseous posterior superior alveolar artery (PSAA) is critical when planning sinus surgery. This study was conducted to determine the distance between the cementoenamel junction and the PSAA, as well as to identify factors influencing the detection of the PSAA on cone-beam computed tomography (CBCT).

Materials and Methods

In total, 254 CBCT scans of maxillary sinuses, acquired with 2 different scanners, were examined to identify the PSAA. The distance from the cementoenamel junction (CEJ) to the PSAA was recorded at each maxillary posterior tooth position. Binomial logistic regression and multiple linear regression were employed to evaluate the effects of scanner type, CBCT parameters, sex, and age on PSAA detection and CEJ-PSAA distance, respectively. P-values less than 0.05 were considered to indicate statistical significance.

Results

The mean CEJ-PSAA distances at the second molar, first molar, second premolar, and first premolar positions were 17.0±4.0 mm, 21.8±4.1 mm, 19.5±4.7 mm, and 19.9±4.9 mm for scanner 1, respectively, and 17.3±3.5 mm, 16.9±4.3 mm, 18.5±4.1 mm, and 18.4±4.3 mm for scanner 2. No independent variable significantly influenced PSAA detection. However, tooth position (b=-0.67, P<0.05) and scanner type (b=-1.3, P<0.05) were significant predictors of CEJ-PSAA distance.

Conclusion

CBCT-based estimates of CEJ-PSAA distance were comparable to those obtained in previous studies involving cadavers, CT, and CBCT. The type of CBCT scanner may slightly influence this measurement. No independent variable significantly impacted PSAA detection.

The safety of maxillary sinus floor elevation and the accuracy of implant placement using dynamic navigation

OBJECTIVE

To date, it remains a challenge to conduct maxillary sinus floor elevation (MSFE) owing to heterogeneity of anatomical structures and limited operative visibility of the maxillary sinus. The aim of this study is to investigate the safety of MSFE and the accuracy of implant placement using dynamic navigation.

METHODS

Forty-two implants were placed in thirty-five patients requiring implantation in posterior maxilla with dynamic navigation. They were assigned to either lateral window sinus floor elevation (LWSFE) group (n = 22) or transcrestal sinus floor elevation (TSFE) group (n = 20) according to the residual alveolar bone height (RBH). Platform deviation, apex deviation and angular deviation between actual and planned implant placement were measured in precision evaluation software. Three deviations of two groups were compared via SPSS 22.0 software.

RESULTS

Neither accidental bleeding nor perforation of Schneiderian membrane occurred in any patients. The actual window position of LWSFE was consistent with the preoperative design. There were no significant differences in platform, apex and angular deviations between the two groups (P > 0.05).

CONCLUSION

In this study the dynamic navigation harvested clinically acceptable safety of MSFE and accuracy for implant placement in posterior maxillary region. The dynamic navigation would provide the clinician with assistance in achieving precise preoperative planning and reducing complications in surgical procedures. The granular bone grafts used in the LWSFE did not significantly affection on the accuracy of the simultaneous implant placement under the guidance of dynamic navigation.

Clinical outcomes and risk factor analysis of dental implants inserted with lateral maxillary sinus floor augmentation: A 3- to 8-year retrospective study

AIM

To evaluate the 3- to 8-year outcomes of dental implants placed with lateral sinus floor augmentation (LSFA) and to identify factors affecting implant survival.

MATERIALS AND METHODS

This retrospective study was performed by screening all implants placed with LSFA procedures, which were conducted between January 2012 and December 2016. Subantral bone gain (SABG) and apical bone height (ABH) were assessed using panoramic radiographs. The cumulative survival rate of implants was analysed using life-table analysis and Kaplan-Meier survival curves. The influential risk factors affecting survival were assessed using univariate log-rank tests and multivariable mixture cure rate model. Implant complications were recorded.

RESULTS

Based on the established criteria, a total of 449 patients (760 implants) were included in this study. In the 3- to 8-year follow-up (mean ± SD, 5.81 ± 1.33 years), 15 implants in 14 patients failed, with a CRS of 96.81% on an implant basis and 95.07% on a patient basis. A history of periodontitis and poor compliance with supportive periodontal treatment was associated with a significantly higher risk of implant failure at both implant and patient levels. Significant decreases in ABH occurred during each yearly interval except for 3 years. A similar trend has been observed for SABG at 1, 2, 6 and 8 years. The total complication rate was 31.84% on implant basis, with peri-implant mucositis (21.58%) being the most frequent biologic complication and porcelain cracking (5.00%) being the most common technical complication.

CONCLUSIONS

Implant with LSFA is a reliable treatment option in atrophic maxilla. A history of periodontitis without regular supportive periodontal treatment was identified as a predictor for implant failure. Slight but significant shrinkage of vertically augmented bone can be observed after implant placement.

The Use of Platelet-Rich Fibrin in Sinus Floor Augmentation Surgery: a Systematic Review

Objectives

This systematic review aims to critically assess the impact of platelet-rich fibrin on maxillary sinus floor augmentation and outline the specific aspects of new bone formation, bone height, implant stability quotient, and Schneiderian membrane thickness.

Material and Methods

A systematic review and meta-analysis were conducted, analysing studies from MEDLINE (PubMed), the Cochrane Library, and ScienceDirect databases, published from January 29, 2018 until January 29, 2024 that compared maxillary sinus floor augmentation (MSFA) using bone graft material with and without platelet-rich fibrin (PRF). This review focused on patients 18 years and older who undergone MSFA before the dental implant placement. It systematically examined five studies, encompassing randomized controlled trials, and reported on 112 MSFA procedures conducted in 84 patients.

Results

The meta-analysis reveals a marginal significance in new bone formation with PRF, suggesting a trend towards beneficial outcomes that were not statistically significant. No significant impact on bone height was observed. However, a notable improvement in implant stability quotient (ISQ) was recorded, indicating enhanced implant stability with PRF. The Schneiderian membrane thickness did not show significant changes post-treatment with PRF.

Conclusions

While platelet-rich fibrin shows promise in enhancing implant stability, its effects on new bone formation and Schneiderian membrane thickness are inconclusive, highlighting the need for further research. Platelet-rich fibrin did not significantly affect bone height. The findings support platelet-rich fibrin's potential as a beneficial adjunct in maxillary sinus floor augmentation, particularly for implant stability.

Efficacy of bone ring grafts for the reconstruction of alveolar ridge deficiencies: A systematic review. Part I: Clinical trials

BACKGROUND

Bone ring (BR) grafts have been introduced to reconstruct alveolar ridge defects with simultaneous implant placement, but its clinical effectiveness remains undetermined. This systematic review aimed to comprehensively investigate BR grafts in diverse scenarios of ridge defect with simultaneous or staged implant placement.

METHODS

Electronic retrieval of MEDLINE, Embase, Cochrane Library(CENTRAL), Web of Science, Scopus, and citation search until August 3, 2023, was used to identify relevant clinical articles that utilized BR grafts for ridge defect reconstruction. The quality of evidence in the studies reviewed was assessed with the Joanna Briggs Institute Critical Appraisal tool. The protocol was registered in Prospective Register of Systematic Reviews (CRD42023453943).

RESULTS

Fourteen studies with 251 BRs were identified, of which 8 studies were for alveolar ridge augmentation, 4 studies were for extraction socket augmentation, and 2 studies were for sinus floor elevation. Reported sources of BRs included autografts, allografts, and xenografts. The follow-up period ranged from 4 months to 4.7 years. Regarding the primary outcomes, the utilization of BR grafts demonstrated favorable bone gain along with acceptable graft absorption and marginal bone loss. Regarding the secondary outcomes, satisfactory bone mineral density and implant stability were confirmed, accompanied by a recorded incidence of postoperative complications (20 cases) and an implant failure rate of 5.58%.

CONCLUSIONS

BR grafting with simultaneous or staged implant insertion is an effective approach for reconstructing alveolar ridge deficiencies. The BR grafts demonstrate favorable bone remodeling and osteointegration with the alveolar bone and implant; however, its success may be compromised by complications. Future studies should further investigate the clinical efficacy of BR grafting comparing to other bone augmentation techniques in diverse scenarios.

Biomechanical analysis of the maxillary sinus floor membrane during internal sinus floor elevation with implants at different angles of the maxillary sinus angles

OBJECTIVE

This study analyzed and compared the biomechanical properties of maxillary sinus floor mucosa with implants at three different maxillary sinus angles during a modified internal sinus floor elevation procedure.

METHODS

3D reconstruction of the implant, maxillary sinus bone, and membrane were performed. The maxillary sinus model was set at three different angles. Two internal maxillary sinus elevation models were established, and finite element analysis was used to simulate the modified maxillary sinus elevation process. The implant was elevated to 10 mm at three maxillary sinus angles when the maxillary sinus floor membrane was separated by 0 and 4 mm. The stress of the maxillary sinus floor membrane was analyzed and compared.

RESULTS

When the maxillary sinus floor membrane was separated by 0 mm and elevated to 10 mm, the peak stress values of the implant on the maxillary sinus floor membrane at three different angles were as follows: maxillary sinus I: 5.14-78.32 MPa; maxillary sinus II: 2.81-73.89 MPa; and maxillary sinus III: 2.82-51.87 MPa. When the maxillary sinus floor membrane was separated by 4 mm and elevated to 10 mm, the corresponding values were as follows: maxillary sinus I: 0.50-7.25 MPa; maxillary sinus II: 0.81-16.55 MPa; and maxillary sinus III: 0.49-22.74 MPa.

CONCLUSION

The risk of sinus floor membrane rupture is greatly reduced after adequate dissection of the maxillary sinus floor membrane when performing modified internal sinus elevation in a narrow maxillary sinus. In a wide maxillary sinus, the risk of rupture or perforation of the wider maxillary sinus floor is reduced, regardless of whether traditional or modified internal sinus elevation is performed at the same height.

A nomogram prediction of implant apical non-coverage on bone-added transcrestal sinus floor elevation: A retrospective cohort study

OBJECTIVES

To identify the risk indicators and develop and validate a nomogram prediction model of implant apical non-coverage by comprehensively analyzing clinical and radiographic factors in bone-added transcrestal sinus floor elevation (TSFE).

MATERIAL AND METHODS

A total of 260 implants in 195 patients receiving bone-added TSFE were included in the study. The population was divided into a development (180 implants) and a validation (80 implants) cohort. According to 6 months post-surgery radiographic images, implants were categorized as "apical non-coverage" or "apical covered." The association of risk factors including clinical and radiographic parameters with implant apical non-coverage was assessed using regression analyses. A nomogram prediction model was developed, and its validation and discriminatory ability were analyzed.

RESULTS

The nomogram predicting bone-added TSFE's simultaneously placed implant's apex non-coverage after 6 months. This study revealed that sinus angle, endo-sinus bone gain, implant protrusion length, graft contact walls, and distal angle were predictors of implant apical non-coverage. The generated nomogram showed a strong predictive capability (area under the curve [AUC] = 0.845), confirmed by internal validation using 10-fold cross-validation (Median AUC of 0.870) and temporal validation (AUC = 0.854). The calibration curve and decision curve analysis demonstrated good performance and high net benefit of the nomogram, respectively.

CONCLUSIONS

The clinical implementation of the present nomogram is suitable for predicting the apex non-coverage of implants placed simultaneously with bone-added TSFE after 6 months.

Outcomes that may affect implant and prosthesis survival and complications in maxillary fixed prosthesis supported by four or six implants: A systematic review and meta-analysis

Objective

To investigate whether the clinical and radiographical outcomes are affected when four or six implants support the maxillary fixed complete denture (FCD).

Materials and methods

This study was registered on PROSPERO (CRD42021226432) and followed the PRISMA guidelines. The focused PICO question was, "For an edentulous maxillary patient rehabilitated with an implant-supported fixed prosthesis, do the clinical and radiographical outcomes differ when four or six implants support the prosthesis ". A thorough search of the relevant studies was designed and performed electronically. The survival rate of implant and prosthesis, marginal bone loss, and complications (mechanical and biological) were the primary outcomes, whereas implant distribution and using the surgical guide, follow-up, and framework material were evaluated as secondary outcomes.

Results

Out of 1099 articles initially retrieved, 53 clearly stated the outcomes of interest and were included in this study. There were no significant differences in implant and prosthesis survival, technical/mechanical complications, and biological complications between the 4-implant group (4-IG) and the 6-implant group (6-IG). However, marginal bone loss (MBL) was significantly higher in the 4-IG (p < 0.01). The surgical guide and follow-up period did not significantly affect implant/prosthesis survival. Additionally, using the CAD/CAM milled framework and anteroposterior implant distribution were associated with significantly higher implant survival in the 6-IG (p < 0.01).

Conclusion

The findings of this study indicated that having a greater number of implants, as seen in the 6-implant group, can lead to a decrease in technical and biological complications and reduce marginal bone loss. It is worth noting that factors such as using CAD/CAM frameworks and the anteroposterior distribution of implants were recognized as important in improving implant survival rates when more implants are present.

Maxillary Sinus Augmentation with Xenogenic Collagen-Retained Heterologous Cortico-Cancellous Bone: A 3-Year Follow-Up Randomized Controlled Trial

Sinus augmentation procedures have become a valuable solution for patients with posterior maxillary edentulism. The objective of this study was to explore the efficacy and safety of porcine xenograft with collagen supplementation as a potential alternative to autologous bone grafts in lateral sinus augmentation over a three-year follow-up period. Twelve patients, each with bilateral posterior maxillary edentulism, were enrolled and randomly allocated to receive either a porcine xenograft or an autologous graft. Comprehensive assessments, including clinical and radiographic evaluations, were conducted at specific intervals, including implant stability, marginal bone loss, prosthetic and biological complications, and patient preferences. The results demonstrated no significant differences between the two graft materials in terms of implant survival, marginal bone loss, and patient preferences after three years of follow-up. Only one implant was affected by peri-implantitis, and prosthesis-related complications were present in one patient possibly due to bruxism. In conclusion, these findings suggest that a porcine xenograft with collagen supplementation may be a viable alternative to an autograft in lateral sinus augmentation procedures. The high implant survival rate, minimal complications, and patient satisfaction indicate the potential clinical relevance of this graft material and should be further investigated to confirm these promising results.

[Uses of 3D printing and Bioprinting for pre-implant bone reconstruction in Oral Surgery]

Pre-implant bone surgery in oral surgery allows to reconstruct maxillary atrophies related to traumatic, infectious or tumoral processes. In this context, the ideal biomaterial remains autogenous bone, but biomaterials (of natural or synthetic origin) allow to limit the morbidity linked to bone harvesting, and to simplify these surgical procedures. In this article, we illustrate how 3D printing technologies can be used as an adjuvant to treat bone defects of complex shape or to create anatomical models used to plan interventions. Finally, some perspectives brought by tissue engineering and bioprinting (creation of complex in vitro models) are presented.

Clinical and patient-centered outcomes following rehabilitation of atrophic edentulous maxilla using six implants placed simultaneously with bilateral maxillary sinus augmentation: A retrospective case series

OBJECTIVES

To evaluate treatment success, patient satisfaction, and oral health-related quality of life (OHRQoL) after rehabilitation of atrophic edentulous maxilla (AEM) with six implants placed simultaneously with bilateral maxillary sinus floor augmentation (MSFA).

MATERIALS AND METHODS

The selected patients were fully edentulous with atrophic maxillary posterior residual ridges and rehabilitated with six implants placed simultaneously with bilateral MSFA and immediate All-on-4 provisional fixed prosthesis (PFP). After 7-12 months of implant surgery, all patients have received an All-on-6 definitive fixed prosthesis (DFP). After at least one year of function with DFP, clinical and radiographic examinations were performed. Patient satisfaction was assessed through a visual analog scale (VAS). The OHRQoL before treatment (T0), during provisional (T1), and after definitive prosthesis (T2) was evaluated using OHI-14.

RESULTS

20 maxillary edentulous patients were rehabilitated with 120 implants, 20 immediate All-on-4 PFP, and 20 All-on-6 DFP. Of those, 12 patients have passed at least a year follow-up after DFP insertion and were eligible to be included in the assessment of treatment success. After a mean of 20 (12-36) months follow-up, the implant and prosthesis survival rates were 100%. The success rate at the implant level was 98.6%. The mean marginal bone loss (MBL) was 0.09 ± 0.06 mm. No prosthetic or postoperative complications, and the mean general satisfaction was (91.75 ± 7.06). There was a significant improvement in all OHIP-14 domains during the final All-on-6 prosthesis (T2) (P < 0.01).

CONCLUSIONS

Rehabilitation of atrophic edentulous maxilla using six implants with simultaneous bilateral MSFA and immediate All-on-4 PFP is a successful treatment approach associated with minimal postoperative complications and significant improvement in OHRQoL.

Maxillary Sinus Lift Procedures: An Overview of Current Techniques, Presurgical Evaluation, and Complications

A maxillary sinus lift procedure is indicated if a dental implant needs to be placed in the posterior maxilla with limited bone available to accommodate a dental implant. Both open and closed sinus lifting procedures are reliable approaches for increasing the bone volume needed to support proper implant positioning. However, these methods can lead to several complications. In addition to the general complications commonly linked to oral surgery, such as swelling or hematoma, the primary complication in open sinus lifting is typically the perforation of the Schneiderian membrane during osteotomy. Detailed and extensive presurgical evaluation is crucial to minimize such complications. The objective of this study was to delineate contemporary trends in sinus lift surgery, with a specific emphasis on different techniques of sinus lift procedure, anatomical and surgical factors, presurgical evaluation, bone grafting, and the practical implications of these factors in implant dentistry cases involving a deficient posterior maxilla. In conclusion, while both osteotome and lateral window techniques can assist clinicians in addressing the complexities of implant placement in a deficient posterior maxilla, bone height before implantation remains a critical factor in determining the success and longevity of implants.

The impact of deproteinized bovine bone particle size on histological outcomes in sinus floor elevation: a systematic review and meta-analysis

OBJECTIVES

The main purpose of this study was to evaluate whether large granular bovine bone can be as effective as small granular bovine bone in maxillary sinus floor elevation.

METHODS

A comprehensive online search of eligible articles was conducted using PubMed, EMBASE, Cochrane Library, Scopus, and Web of Science, and a systematic review and meta-analysis was performed from establishment to February, 2023. The outcome indicators were the percentage of connective tissue, the percentage of newly formed bone and the percentage of residual xenograft respectively. The meta-analysis was conducted by using the Stata 15.1 (Stata Conpernarn, USA) and Review Manager software5.4.1.

RESULTS

After careful screening and review, a total of 4 studies were included for systematic review and meta-analysis. The data were extracted to compare the histological performance of bovine bones with different particle sizes after maxillary sinus elevation. No significant differences were found in the percentage of connective tissue, the percentage of newly formed bone, and the percentage of residual xenograft.

CONCLUSION

In this study, a systematically review of the previous literature showed that similar histological results were obtained for both large-particle bovine bone and small-particle bovine bone. Therefore, the large granular bovine bone and the small granular bovine bone were equally effective in maxillary sinus elevation. It is difficult to make conclusion from limited evidence from four studies. More clinical evidence was needed.

Maxillary sinus floor augmentation: a review of current evidence on anatomical factors and a decision tree

Maxillary sinus floor augmentation using lateral window and crestal technique is considered as predictable methods to increase the residual bone height; however, this surgery is commonly complicated by Schneiderian membrane perforation, which is closely related to anatomical factors. This article aimed to assess anatomical factors on successful augmentation procedures. After review of the current evidence on sinus augmentation techniques, anatomical factors related to the stretching potential of Schneiderian membrane were assessed and a decision tree for the rational choice of surgical approaches was proposed. Schneiderian membrane perforation might occur when local tension exceeds its stretching potential, which is closely related to anatomical variations of the maxillary sinus. Choice of a surgical approach and clinical outcomes are influenced by the stretching potential of Schneiderian membrane. In addition to the residual bone height, clinicians should also consider the stretching potential affected by the membrane health condition, the contours of the maxillary sinus, and the presence of antral septa when evaluating the choice of surgical approaches and clinical outcomes.

Changes in bone graft height and influencing factors after sinus floor augmentation by using the lateral window approach: A clinical retrospective study of 1 to 2 years

STATEMENT OF PROBLEM

Recent systematic reviews have reported resorption of bone grafts after augmentation, but the influencing factors are numerous and uncertain. Different brands of bone graft and other factors may affect the bone formation effect after sinus floor augmentation.

PURPOSE

The purpose of this retrospective clinical study was to evaluate the graft material height changes after sinus floor augmentation with cone beam computed tomography (CBCT) and to investigate the potential influencing factors related to graft resorption.

MATERIAL AND METHODS

Four midsagittal cut CBCT images of 157 posterior maxillary implants after maxillary sinus floor elevation by using the lateral window approach with bone grafts from 116 patients were obtained. Four CBCT scans had been performed immediately (T0), 6 months (T1) and 12 months after bone grafting (T2), and 1.5 to 2 years after treatment (T3), and the distance between the implant platform and the grafted mucosa of the maxillary sinus floor was measured at 3 locations. Correlation coefficients of these parameters were calculated. A linear mixed model was used to investigate potential factors influencing graft height reduction, including the patient's sex, age, smoking status, periodontal status, graft brand, implant site, implant level, placement time, and residual bone height.

RESULTS

Mean ±standard deviation graft height at the mesial side of the implant (MeGH) was significantly decreased by 0.32 ±0.88 mm in the first 6 months, was gradually reduced after 6 months (0.26 ±0.43 mm), and then 1 to 2 years later increased to 0.39 ±0.97 mm. The changes in graft height at the center of the implant (CeGH) and graft height at the distal side (DiGH) groups were similar to those in the MeGH group. A significantly positive correlation was found among the height alterations in 3 locations (rs=0.954, P<.001). The linear mixed model showed that smoking was more likely to cause graft height reduction in MeGH (P=.034).

CONCLUSIONS

Graft height significantly decreased after maxillary sinus augmentation over 1 to 2 years. Smoking had a negative effect on graft height changes, while the 2 brands of graft and other factors had no significant effect.

The Effectiveness of the Addition of Platelet-Rich Fibrin to Bovine Xenografts in Sinus and Bone Ridge Augmentation: A Systematic Review

Dental implants sometimes need bone augmentation to recreate an adequate bone height and volume. Numerous bone augmentation techniques have been described, and, currently, the most commonly used bone graft procedure is xenografts with deproteinized bovine bone mineral (DBBM). The addition of platelet-rich fibrin (PRF) to DBBM has already shown better performance than DBBM alone in restoring intrabony periodontal defects, but the role of PRF in preimplantation bone grafts is still not clear. The objective of this systematic review was to evaluate the efficacy of the adjunction of PRF or L-PRF to DBBM in bone ridge augmentation procedures. Clinical randomized controlled studies using PRF associated with DBBM were included. In April 2023, three electronic databases (PubMed, Cochrane, and Web of Science) were searched. The search strategy was performed according to PRISMA guidelines. The risk of bias assessments were performed using the Cochrane Collaboration tool. A total of seven articles were included and analyzed. The results show no statistically significant effect of PRF added to DBBM compared to DBBM alone in the sinus lift procedure but do show an effect in the reduction in bone graft resorption in one study of mandibular guided bone regeneration.

Factors Influencing Recurrence after Surgical Treatment of Odontogenic Maxillary Sinusitis: An Analysis from the Oral and Maxillofacial Surgery Point of View

The aim of the study was to determine the factors influencing the development of recurrence after the surgical treatment of odontogenic maxillary sinusitis in an oral and maxillofacial surgery clinic over a 7-year period. Demographic and anamnesis data, clinical and radiological findings, treatment and outcome were analyzed. A multivariable analysis was performed to find associations between patient age, causative focus, surgical access for sinus revision, multilayer closure with a buccal fat pad, inferior meatal antrostomy (IMA) for temporary sinus drainage and sinusitis recurrence. A total of 164 patients with a mean age of 51.7 years were included. Sinusitis recurrence was observed in nine patients (5.48%) within 6 months after primary surgery. No significant correlation was detected between patient age, causative focus, surgical access for sinus revision, multilayer closure with a buccal fat pad, IMA for sinus drainage and the development of recurrence (p > 0.05). Patients with a history of antiresorptive-related osteonecrosis of the jaw showed a significant tendency toward disease recurrence (p = 0.0375). In conclusion, except for antiresorptive administration, none of the investigated variables were related to a higher risk of sinusitis recurrence. We encourage a combined approach of intraoral removal of the infective focus and sinus drainage via FESS, as well as an individual treatment decision in a multidisciplinary setting with collaboration between dentistry, maxillofacial surgery and otorhinolaryngology to avoid sinusitis recurrence.

Evaluation of Two Configurations of Hydroxyapatite and Beta-Tricalcium Phosphate in Sinus Grafts with Simultaneous Implant Installation: An Experimental Study in Rabbits

BACKGROUND

This study aimed to evaluate peri-implant bone formation in rabbits after sinus grafting mediated by hydroxyapatite and beta-tricalcium phosphate (HA + β-TCP) in granule or paste configurations, concomitant with immediate implant installation.

MATERIAL & METHODS

Thirty-four rabbit maxillary sinuses were grafted with HA + β-TCP, half of which were applied in a granule and half in a paste composition. Implant placement was performed simultaneously. At 7 and 40 days postoperatively, the animals were euthanized, and samples were prepared for tomographic, microtomographic, histological, histometric (hematoxylin and eosin staining, HE), and immunohistochemical (labeling of transcription factor Runx-2 [RUNX2], vascular endothelial growth factor [VEGF], osteocalcin [OCN], and tartrate-resistant acid phosphatase [TRAP]) analysis. Implant removal torque was also measured.

RESULTS

On tomography, maintenance of sinus membrane integrity was observed in both the groups. Higher values of morphometric parameters evaluated by micro-CT were found in the "paste group" after seven days. At 40 days, there were no significant differences between the groups in most of the microtomographic parameters evaluated. In histological sections stained with HE, a higher percentage of newly formed bone was observed in the "granule group" after 40 days. Similar positive immunolabeling was observed for both RUNX2 and OCN in both the experimental groups. TRAP immunolabeling was similar in both groups as well. VEGF labeling increased in the "granule group", indicating a higher osteoconductive potential in this biomaterial. Similar removal torque values were observed in both groups. Thus, the two HA + β-TCP configurations showed similar healing patterns of simultaneously installed implants adjacent to sinus floor elevation. However, significantly higher bone values were observed for the "granule configuration".

CONCLUSIONS

The HA + β-TCP granules and paste presentations showed favorable long-term healing results, with bone formation in similar quantities and quality adjacent to the implants.

Osteoinductive calcium phosphate with submicron topography as bone graft substitute for maxillary sinus floor augmentation: A translational study

OBJECTIVES

The aim of this study was the preclinical and clinical evaluation of osteoinductive calcium phosphate with submicron surface topography as a bone graft substitute for maxillary sinus floor augmentation (MSFA).

MATERIAL AND METHODS

A preclinical sheep model of MSFA was used to compare a calcium phosphate with submicron needle-shaped topography (BCPN , MagnetOs Granules, Kuros Biosciences BV) to a calcium phosphate with submicron grain-shaped topography (BCPG ) and autologous bone graft (ABG) as controls. Secondly, a 10-patient, prospective, randomized, controlled trial was performed to compare BCPN to ABG in MSFA with two-stage implant placement.

RESULTS

The pre-clinical study demonstrated that both BCPN and BCPG were highly biocompatible, supported bony ingrowth with direct bone apposition against the material, and exhibited bone formation as early as 3 weeks post-implantation. However, BCPN demonstrated significantly more bone formation than BCPG at the study endpoint of 12 weeks. Only BCPN reached an equivalent amount of bone formation in the available space and a greater proportion of calcified material (bone + graft material) in the maxillary sinus compared to the "gold standard" ABG after 12 weeks. These results were validated in a small prospective clinical study, in which BCPN was found comparable to ABG in implant stability, bone height, new bone formation in trephine core biopsies, and overall clinical outcome.

CONCLUSION

This translational work demonstrates that osteoinductive calcium phosphates are promising bone graft substitutes for MSFA, whereas their bone-forming potential depends on the design of their surface features. Netherlands Trial Register, NL6436.

Residual Bone Height and New Bone Formation after Maxillary Sinus Augmentation Procedure Using Biomaterials: A Network Meta-Analysis of Clinical Trials

BACKGROUND

Different factors may affect new bone formation following maxillary sinus floor augmentation for the rehabilitation of posterior edentulous maxilla. The purpose of this study was to determine the influence of residual bone height (RBH) on new bone formation after lateral sinus augmentation utilizing different biomaterials, through a network meta-analysis (NMA).

METHODS

PUBMED, Scopus, and Web of Science electronic databases were searched until 31 December 2022 to obtain relevant articles. A hand search was also conducted. Randomised controlled studies on maxillary sinus augmentation comparing different grafting materials in patients with atrophic posterior maxilla, in need of prosthetic rehabilitation, were included. The risk of bias was assessed following the guidelines of the Cochrane Collaboration. The primary outcome was new bone formation (NBF), assessed histomorphometrically. The statistical analysis was performed by splitting the data according to RBH (<4 mm and ≥4 mm).

RESULTS

A total of 67 studies were eligible for conducting NMA. Overall, in the included studies, 1955 patients were treated and 2405 sinus augmentation procedures were performed. The biomaterials used were grouped into: autogenous bone (Auto), xenografts (XG), allografts (AG), alloplasts (AP), bioactive agents (Bio), hyaluronic acid (HA), and combinations of these. An inconsistency factor (IF) seen in the entire loop of the XG, AP, and Bio+AP was found to be statistically significant. The highest-ranked biomaterials for the <4 mm RBH outcome were XG+AG, XG+AP, and Auto. Similarly, the surface under the cumulative ranking curve (SUCRA) of biomaterials for ≥4 mm RBH was Auto, Bio+XG, and XG+Auto.

CONCLUSION

There is no grafting biomaterial that is consistently performing better than others. The performance of the materials in terms of NBF may depend on the RBH. While choosing a biomaterial, practitioners should consider both patient-specific aspects and sinus clinical characteristics.

Histological examination of the effect of concentrated growth factor (CGF) on healing outcomes after maxillary sinus floor augmentation surgery

A double-blind clinical trial was conducted to examine the effect of concentrated growth factor (CGF), a new generation of platelet derivatives, on the healing outcome of maxillary sinus floor augmentation during maxillary sinus lift surgery. The study included 9 patients referred to the Tabriz University, Faculty of Dentistry, aged 30-80 years, with bilateral posterior partial edentulous or edentulous maxilla who underwent the procedure using a split-mouth technique. After lifting the Schneiderian membrane, bovine xenograft was randomly applied on one side (for example, left maxillary sinus) and CGF on the other side (for example, right maxillary sinus). Results from alizarin red and hematoxylin-eosin staining methods showed that the percentage of bone formed in the CGF group (112.41±26.34% and 96.16±24.49%, respectively) was significantly higher than in the control group (64.99±24.96% and 60.16±16.39%, respectively) (P<0.05). In addition, after 6 months, the amount of residual graft material in the control group (xenograft) was significantly higher than in the CGF group (P<0.05). These findings demonstrate that the use of CGF during open sinus lift surgery is reliable for the placement of dental implants.

A Randomized Clinical Trial Comparing Implants Placed in Two Different Biomaterials Used for Maxillary Sinus Augmentation

The objective of this study was to compare marginal bone loss, surgical and clinical complications, and dental implant survival rate in bilateral maxillary sinus augmented by autologous or porcine xenograft. A randomized controlled clinical trial using split-mouth design enrolled 12 consent adult patients (59.7 ± 8.7 years), who received bilateral maxillary sinus floor augmentation for oral rehabilitation with implant-supported prosthesis. Each patient received both the autologous bone from the mandible (control) or porcine xenograft (test) during the random bilateral sinus lift surgery. A total of 39 dental implants were placed in the posterior maxilla of the 12 patients after 6 months, being rehabilitated after the respective osseointegration period. Both graft materials demonstrated a high implant survival rate at 12 months: 95% for the xenograft side, only 1 implant without osseointegration, and 100% for the autologous side. Radiographic bone loss was low and similar for both groups: control group with a mean of 0.063 ± 0.126, and test group with a mean of 0.092 ± 0.163. No major surgical-related complications have occurred. Only one patient had several prosthetic complications due to fractures of prosthetic components. The maxillary sinus augmentation procedure, both with autologous bone and porcine xenograft materials, is an excellent clinical option procedure for the prosthetic rehabilitation of atrophic maxillae, with low marginal bone loss after one year follow-up, few clinical complications, and a high implant survival rate.

MiR-20a promotes osteogenic differentiation in bone marrow-derived mesenchymal stem/stromal cells and bone repair of the maxillary sinus defect model in rabbits

Introduction: This study aimed to determine whether miR-20 promoted osteogenic differentiation in bone marrow-derived mesenchymal stem/stromal cells (BMSCs) and accelerated bone formation in the maxillary sinus bone defect model in rabbits. Methods: BMSCs were transfected with miR-20a or anti-miR-20a for 12 h, followed by detection of RUNX2, Sp7 mRNA, bone morphogenetic protein 2 (BMP2), and RUNX2 protein expression. Alkaline phosphatase (ALP) activity and Alizarin Red S staining were used to detect calcified nodule deposition. In the rabbit maxillary sinus bone defect model, miR-20a loaded with AAV and BMP2 protein were mixed with Bio-Oss bone powder for filling the bone defect. At 4 weeks and 8 weeks, bone density was detected by cone beam computed tomography (CBCT), and new bone, osteoblasts, and collagen type 1 were evaluated by hematoxylin and eosin (HE) staining and immunohistochemical (IHC) staining. Results: Overexpression of miR-20a enhanced the mRNA and protein levels of BMP2, RUNX2, and SP7, the activity of ALP, and the levels of matrix mineralization, whereas the levels and activity of the aforementioned factors were decreased by anti-miR-20a treatment of BMSCs. Furthermore, miR-20a significantly increased the bone density, the number of osteoblasts, and the secretion of collagen type 1 in bone defects compared with Bio-Oss bone powder in the rabbit maxillary sinus bone defect model. Conclusion: Overall, miR-20a can induce osteogenic differentiation in BMSCs and accelerate bone formation of maxillary sinus defects in rabbits.

Does the use of platelet-rich plasma in sinus augmentation improve the survival of dental implants? A systematic review and meta-analysis

Background

Platelet-rich plasma is considered an effective modality to promote bone regeneration, improve hard and soft tissue healing in surgical procedures including sinus augmentation. However, the survival of dental implants in sinus augmented sites with platelet-rich plasma has shown equivocal results in recent studies.

Purpose

In this systematic review, data on dental implants' survival in sinus augmentation sites with platelet-rich plasma were examined.

Materials and methods

Randomized controlled trials on the topic with a minimum mean follow-up of 6 months with no language restriction were considered. Other study designs on the topic were excluded. Accordingly, relevant articles were searched in Clinicaltrials.gov, Cochrane databases, PubMed/Medline, and Scopus up to April 2021. Using the Cochrane risk of bias assessment tool, the listed studies' risk of bias was evaluated. From the included studies, the pertinent information was taken and pooled for qualitative and quantitative analysis using R software 4.1.1.

Results

Six randomized controlled trials involving 188 patients who underwent sinus augmentation with and without platelet-rich plasma, and 781 implants were included for qualitative and quantitative analysis. Four hundred and eleven implants were placed in the intervention group (with platelet-rich plasma) and 370 implants were placed in the control group (without platelet-rich plasma). The pooled estimate (OR 0.84, 95% CI 0.37 to 1.91; I2 = 0%) indicated that there was no statistically significant difference observed between the groups. The test for subgroup differences showed no statistically significant differences between the subgroups (p = 0.45) with no heterogeneity (I2 = 0%).

Conclusion

The bias associated with selective reporting of outcome data was considered as some concern for bias. This systematic review revealed that the effect of platelet-rich plasma is uncertain on the survival of dental implants.

The Effectiveness of a Bioactive Healing Abutment as a Local Drug Delivery System to Impact Peri-Implant Mucositis: A Prospective Case Series Study

Modern dental therapy makes use of prosthetic implant reconstructions, which are supported or retained on dental implants. The most frequent, long-term complications associated with these prosthetic implants include mucositis and peri-implantitis. Since mucositis is the initial inflammation of tissues supporting the dental implant, the management of this condition is thus crucial. The aim of the present study was to assess the effects of the placement of bioactive healing abutment for 48 h, in patients diagnosed with peri-implant mucositis. Moreover, the quantitative and qualitative shift in the bacterial profile of the biofilm present in the peri-implant pockets, was assessed by means of RT-PCR genotyping. Each patient was examined using a commercially available PET test protocol: the first sample was taken upon diagnosis (after which the bioactive healing abutment, with clindamycin at a dose of 30 mg, was used for 48 h and replaced with the prosthetic superstructure used so far by a patient); the second sample was taken two weeks after removal of the bioactive healing abutment. The effects of the intervention were clinically assessed using the PET test after the two weeks. A significant reduction in mucositis was observed following treatment, as measured by periodontal indices: modified Sulcus Bleeding Index—mBI (p < 0.001), modified Plaque Index—PLI (r = 0.69, Z= −4.43; p < 0.001) and probing depth—PD (Z = −4.61; p < 0.001). Significant differences in the occurrence of periopathogenic bacteria were also observed: Aggregatibacter actinomycetemcomitans (p < 0.014; Z = −2.45; r = 0.38), Treponema denticola (p < 0.005; Z = −2.83; r = 0.44), Tannerella forsythia (p < 0.001; Z = −4.47; r = 0.69) and Porphyromonas gingivalis (p < 0.132; Z = −1.51).

Influence of the contact area of the sub-antral space with sinus bone and the Schneiderian membrane on osteogenesis in lateral window sinus elevation surgery: a prospective experiment

BACKGROUND

Osteogenesis of lateral window sinus elevation surgery is the key to placement of the subsequent implant, excessive collapse of the sub-antral space may adversely affect long-term stability of implants. At present, few studies focus on the influence of the contact area of the sub-antral space on osteogenesis. This study evaluated whether the change in the contact area of the sub-antral space with maxillary sinus bone and the Schneiderian membrane can affect osteogenesis.

METHODS

Cone beam computed tomography (CBCT) images were collected of patients requiring maxillary sinus floor elevation (residual bone height < 6 mm) for standard-length implant placement before surgery, after surgery, and at 6-month follow-up visits. The postoperative sub-antral space volume (V₁) and surface area (S₁), and the remaining volume after six months of healing (V₂) were measured. Then, the contact area of sub-antral space with maxillary sinus bone (S_bc) and the Schneiderian membrane (S_mc), the absorbed volume during healing (V_a), and the percentage of remaining volume (V₂%) and absorbed volume (V_a%) were calculated. The correlation between anatomical parameters was analyzed using multiple linear regression.

RESULTS

A total of 62 maxillary sinuses from 56 patients were augmented, of which 57 were considered for the final analysis (5 withdrew due to perforation). Multiple linear regression results demonstrated that S_bc was significantly positively correlated with V_a (β coefficient = 0.141, p < 0.01) without correlation between S_mc and V_a (β coefficient =  - 0.046, p = 0.470). There was a positive correlation between S_bc and V₂% (β coefficient = 2.269, p < 0.05).

CONCLUSIONS

This study confirmed that the size of the S_bc in lateral window sinus elevation surgery affected osteogenesis after six months of healing. Clinicians should assess the sinus contour type preoperatively, then consider whether it is necessary to expand the range of the Schneiderian membrane elevation to avoid excessive collapse of the sub-antral space.

TRIAL REGISTRATION

Chinese Clinical Trial Registry (ChiCTR), ChiCTR2200057924. Registered 22 March 2022-Retrospectively registered.

Simultaneous placement of short implants (≤ 8 mm) versus standard length implants (≥ 10 mm) after sinus floor elevation in atrophic posterior maxillae: a systematic review and meta-analysis

Purpose

The objective of this meta-analysis was to compare the clinical outcomes of using short implants (≤ 8 mm) inserted with osteotome sinus floor elevation (OSFE) and standard implants (≥ 10 mm) inserted with sinus floor elevation (SFE) in atrophic posterior maxillae with insufficient residual bone height (RBH).

Methods

An electronic search was performed on PubMed, EMBASE, and the Cochrane Library from 1994 to July 2022, in combination with a manual search of references in relevant articles. Randomized controlled trials (RCTs) that compared the clinical results between short and standard implant placement with SFE were included. The primary outcomes were implant survival rate and marginal bone loss (MBL); the secondary outcome was complication rate.

Results

Three RCTs were included, totaling 138 short and 156 standard implants. The results of the meta-analysis showed no significant differences between the short and standard implant groups in survival rate (RR = 1.02, 95% CI   0.96–1.08, p = 0.570), MBL (MD = − 0.13, 95% CI   − 0.32 to 0.07, p = 0.190) and complication rate (intra-surgical complication: RR = 1.14, 95% CI   0.46–2.83, p = 0.770; post-operative complication: RR = 1.34, 95% CI   0.71–2.55, p = 0.370).

Conclusions

Using short implants (≤ 8 mm) combined with OSFE might be an alternative to standard implants (≥ 10 mm) with SFE when the RBH of the posterior maxilla is insufficient. Based on a short-term clinical observation, short implants with OSFE show good results in terms of survival rate, MBL, and complication incidence.

Graphical Abstract

The bone lid technique in lateral sinus lift: a systematic review and meta-analysis

Objective

This systematic review aimed at assessing the effect of the repositioned bone lid on bone augmentation in lateral sinus lift in pre-clinical in vivo and clinical studies. Secondary aims were to report on the healing of the bone window and to assess the implant survival rate.

Material and methods

Animal and human studies comparing lateral maxillary sinus floor elevation in combination or not with the repositioned bone lid were retrieved from MEDLINE (PubMed), Web of Science and Cochrane online library. Studies published in English up to April 2022 and reporting on histological and/or radiographic outcomes were considered. Case reports, case series and reviews were excluded. A hand search was also conducted. Risk of bias was assessed and meta-analysis performed to investigate the effect of the bone lid on new bone formation.

Results

After screening, 5 animal studies (4 in rabbits, 1 in sheep) and 2 clinical studies (1 RCT, 1 case–control) were included. Meta-analysis confirmed a higher new bone formation in rabbits at 2 and 8 weeks using the bone lid. The two clinical studies investigated lateral sinus lift with concomitant implant placement and reported similar results and high short-term implant success rate in both test and control groups.

Conclusions

The meta-analysis provided moderate evidence that the repositioned bone lid favored the formation of new bone to a higher extent as compared to resorbable membranes in animal studies. Implant success seems not to be influenced by the technique in the short term.

Primary stability of different implant macrodesigns in a sinus floor elevation simulated model: an ex vivo study

BACKGROUND

A novel type of implant (Straumann® BLX implant) has been developed for certain stability from the mechanical and biological aspects and is expected for the implant placement in atrophic maxilla with sinus floor elevation (SFE).

PURPOSE

The aim of this study was to evaluate the primary stability in the implants with different macrodesigns in an SFE simulated model. Primary stabilities defined as maximum insertion torque (MIT) and implant stability quotient (ISQ) were compared between this novel type of implant and other types.

MATERIALS AND METHODS

Five types of Straumann® 10 mm length implants (Standard Plus; SP, Tapered Effect; TE, Bone Level; BL, Bone Level Tapered; BLT and BLX) and two types of Straumann® 6 mm length implants (SP short, BLX short) were used in this study. Each implant was inserted through 5 mm-thick porcine iliac crest blocks (an SFE simulated model). Primary stability was evaluated by using MIT and ISQ.

RESULTS

The mean value of MIT for BLX group showed significantly higher values than SP, BL (p < 0.01), and TE (p < 0.05) groups. The mean value of ISQ for BLX group was significantly higher than the other groups (p < 0.01). The mean value of MIT and ISQ for BLX and BLX short group were significantly higher than those for SP and SP short group (p < 0.01).

CONCLUSIONS

In an SFE simulated ex vivo model, BLX group showed the highest values. These results suggest that implant selection can play a crucial role in the achievement of primary stability during SFE and simultaneous implant placement.

Advances in Barrier Membranes for Guided Bone Regeneration Techniques

Guided bone regeneration (GBR) is a widely used technique for alveolar bone augmentation. Among all the principal elements, barrier membrane is recognized as the key to the success of GBR. Ideal barrier membrane should have satisfactory biological and mechanical properties. According to their composition, barrier membranes can be divided into polymer membranes and non-polymer membranes. Polymer barrier membranes have become a research hotspot not only because they can control the physical and chemical characteristics of the membranes by regulating the synthesis conditions but also because their prices are relatively low. Still now the bone augment effect of barrier membrane used in clinical practice is more dependent on the body’s own growth potential and the osteogenic effect is difficult to predict. Therefore, scholars have carried out many researches to explore new barrier membranes in order to improve the success rate of bone enhancement. The aim of this study is to collect and compare recent studies on optimizing barrier membranes. The characteristics and research progress of different types of barrier membranes were also discussed in detail.

Histomorphometric evaluation of different graft associations for maxillary sinus elevation in wide antral cavities: a randomized controlled clinical trial

OBJECTIVES

Pneumatization of the maxillary sinus can make it difficult, if not impossible, to install osseointegrated implants, and undertake their eventual functional rehabilitation, which may ultimately require regenerative techniques to achieve. This randomized controlled study proposed conducting a histological evaluation of the behavior of different graft materials in wide maxillary sinuses, at a height of 8 to 10 mm from the alveolar ridge, combined with bone remnants less than 3mm.

MATERIALS AND METHODS

Thirty-six patients underwent a sinus elevation procedure through the lateral window. The sinuses were randomly filled with the following materials (n=12/group): group 1, xenogenic bone + autogenous bone (ratio 70:30, respectively); group 2, xenogenic bone + L-PRF; and group 3, xenogenic bone. At 8 months, bone biopsies of engrafted sites were harvested and analyzed histomorphometrically in order to quantify newly formed bone tissue.

RESULTS

The results showed a greater area of newly formed bone for G1, averaging 2678.37 (1116.40) μm², compared with G2 at 984.87 (784.27) μm², and G3 at 480.66 (384.76) μm² (p < 0.05). Additionally, fewer xenogenic bone particles and a large amount of connective tissue were observed in G2.

CONCLUSIONS

In maxillary sinuses with large antral cavities, autogenous bone combined with xenogenic bone seems to demonstrate better graft remodeling and improve bone formation, compared with the addition of L-PRF.

CLINICAL RELEVANCE

L-PRF produces few advantages regarding new bone formation in the wide maxillary sinuses.

TRIAL REGISTRATION

Brazilian Clinical Trials Registry (REBEC) number RBR-2pbbrvg.

Temporal and Permanent Changes Induced by Maxillary Sinus Lifting with Bone Grafts and Maxillary Functional Endoscopic Sinus Surgery in the Voice Characteristics-Systematic Review

Sinus surgery procedures such as sinus lifting with bone grafting or maxillary functional endoscopy surgery (FESS) can present different complications. The aims of this systematic review are to compile the post-operatory complications of sinus elevation with bone grafting and FESS including voice changes, and to elucidate if those changes are either permanent or temporary. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) were used, and the literature was exhaustively searched without time restrictions for randomized and non-randomized clinical studies, cohort studies (prospective and retrospective), and clinical case reports with ≥4 cases focused on sinus lift procedures with bone grafts and functional endoscopic maxillary sinus surgery. A total of 435 manuscripts were identified. After reading the abstracts, 101 articles were selected to be read in full. Twenty articles that fulfilled the inclusion criteria were included for analysis. Within the limitations of this systematic review, complications are frequent after sinus lifting with bone grafts and after FEES. Voice parameters are scarcely evaluated after sinus lifting with bone grafts and no voice changes are reported. The voice changes that occur after FESS include a decreased fundamental frequency, increased nasality, and nasalance, all of which are transitory.

Influence of anatomical factors related to maxillary sinus on outcomes of transcrestal sinus floor elevation

Background/purpose

Graft bone maturation and remodeling in the maxillary sinus require adequate angiogenesis and osteoprogenitor cells migration from the surrounding bony walls and Schneiderian membrane. This study aimed to evaluate the influence of anatomical factors related to maxillary sinus on the outcomes of transcrestal sinus floor elevation using cone-beam computed tomography (CBCT).

Materials and methods

Forty-five patients (63 elevated sites) were included in this study. CBCT were obtained preoperatively, immediately and 6 months after surgery. The anatomical features of residual bone height, maxillary sinus width, maxillary sinus angle and Schneiderian membrane thickness were measured on preoperative CBCT. Descriptive statistics and correlation analysis were conducted to evaluate the influence of anatomical factors on outcome parameters, including sinus lift height, graft bone resorption and marginal bone loss.

Results

The results showed that there was a positive correlation between sinus width and graft bone resorption. A significantly positive correlation between sinus angle and graft bone resorption was also found.

Conclusion

Our findings indicate that the anatomical factors of maxillary sinus (sinus width and sinus angle) have influence on the linear change of bone grafts after transcrestal sinus floor elevation.

The Modified Osseodensification Visco-Elastic (MOVE) Sinus Protocol: A Case Series to Illustrate the Combination of Osseodensification with Viscoelastic Bone Replacement Material

INTRODUCTION

The Modified Osseodensification Visco-Elastic (MOVE) protocol combines two established techniques for sinus lifting: osseodensification drills to elevate the Schneiderian membrane, and the use of a viscoelastic putty to distribute forces on the membrane, a combination first described by Neiva et al. (2019). This case series elucidates the technique for combining these materials, and its possible benefits, which include reduced procedure time, less traumatic sinus elevation, and more versatility for unusual sinus anatomy, such as sloped sinus floors and immediate implant sites.

CASE SERIES

The three cases, illustrating a single implant, adjacent implants, and an immediate implant, demonstrate various indications for using the MOVE protocol, documented with two- and three-dimensional radiography. The MOVE protocol is explained in detail with supplemental photos of the steps.

CONCLUSION

Applying the MOVE protocol has the potential to allow for same-day implant placement in sites that previously required preoperative bone augmentation or lateral wall sinus access, thereby reducing the extent of surgical invasiveness associated with implant placement in the posterior maxilla.

Radiographic and Histomorphometric Evaluation of Biomaterials Used for Lateral Sinus Augmentation: A Systematic Review on the Effect of Residual Bone Height and Vertical Graft Size on New Bone Formation and Graft Shrinkage

The aim of the present systematic review was to investigate the effect of residual bone height (RBH) and vertical bone gain on new bone formation (NBF) and graft shrinkage after lateral sinus lifts using different biomaterials.

METHODS

An electronic search was conducted on three databases to identify randomized controlled trials (RCTs) published until January 2021 with at least one follow-up at 6 months and at least five patients treated, comparing biomaterials used for maxillary sinus augmentation with a lateral approach. Graft volumetric changes, RBH, vertical bone gain, implant failure, and post-operative complications were evaluated. The risk of bias was assessed using the Cochrane tool.

RESULTS

We used 4010 identified studies, of which 21 were RCTs. Overall, 412 patients and 533 sinuses were evaluated. Only three publications had an overall low risk of bias. After 6 months, xenograft (XG) showed the least volume reduction (7.30 ± 15.49%), while autogenous graft (AU) was the most reabsorbed (41.71 ± 12.63%). NBF appeared to not be directly correlated with RBH; on the contrary, the overall linear regression analysis showed that NBF significantly decreased by 1.6% for each mm of postoperative vertical graft gain. This finding suggests that the greater the augmentation, the lower the NBF. A similar tendency, with a regression coefficient even higher than the overall one, was also observed with alloplast (AP) and XG.

CONCLUSIONS

The present results suggested that NBF was essentially independent of preoperative bone height. On the contrary, the smaller the volume was of the graft placed, the higher the amount of new bone formed, and the smaller the graft shrinkage was. Minimizing the augmentation volume might be beneficial to graft healing and stability especially when using AP and XG.

Bone regeneration capacity of newly developed spherical magnesium phosphate cement granules

OBJECTIVES

Magnesium phosphate-based cements begin to catch more attention as bone substitute materials and especially as alternatives for the more commonly used calcium phosphates. In bone substitutes for augmentation purposes, atraumatic materials with good biocompatibility and resorbability are favorable. In the current study, we describe the in vivo testing of novel bone augmentation materials in form of spherical granules based on a calcium-doped magnesium phosphate (CaMgP) cement.

MATERIALS AND METHODS

Granules with diameters between 500 and 710 μm were fabricated via the emulsification of CaMgP cement pastes in a lipophilic liquid. As basic material, two different CaMgP formulations were used. The obtained granules were implanted into drill hole defects at the distal femoral condyle of 27 New Zealand white rabbits for 6 and 12 weeks. After explantation, the femora were examined via X-ray diffraction analysis, histological staining, radiological examination, and EDX measurement.

RESULTS

Both granule types display excellent biocompatibility without any signs of inflammation and allow for proper bone healing without the interposition of connective tissue. CaMgP granules show a fast and continuous degradation and enable fully adequate bone regeneration.

CONCLUSIONS

Due to their biocompatibility, their degradation behavior, and their completely spherical morphology, these CaMgP granules present a promising bone substitute material for bone augmentation procedures, especially in sensitive areas.

CLINICAL RELEVANCE

The mostly insufficient local bone supply after tooth extractions complicates prosthetic dental restoration or makes it even impossible. Therefore, bone augmentation procedures are oftentimes inevitable. Spherical CaMgP granules may represent a valuable bone replacement material in many situations.

Sinus Lift and Implant Insertion on 3D-Printed Polymeric Maxillary Models: Ex Vivo Training for In Vivo Surgical Procedures

Background and Objectives: The aim of this study is to demonstrate the increased efficiency achieved by dental practitioners when carrying out an ex vivo training process on 3D-printed maxillaries before performing in vivo surgery. Materials and Methods: This developed ex vivo procedure comprises the following phases: (i) scanning the area of interest for surgery; (ii) obtaining a 3D virtual model of this area using Cone Beam Computed Tomography (CBCT); (iii) obtaining a 3D-printed model (based on the virtual one), on which (iv) the dental practitioner simulates/rehearses ex vivo (most of) the surgery protocol; (v) assess with a new CBCT the 3D model after simulation. The technical steps of sinus augmentation and implant insertion could be performed on the corresponding 3D-printed hemi-maxillaries prior to the real in vivo surgery. Two study groups were considered, with forty patients divided as follows: Group 1 comprises twenty patients on which the developed simulation and rehearsal procedure was applied; Group 2 is a control one which comprises twenty patients on which similar surgery was performed without this procedure (considered in order to compare operative times without and with rehearsals). Results: Following the ex vivo training/rehearsal, an optimal surgery protocol was developed for each considered case. The results of the surgery on patients were compared with the results obtained after rehearsals on 3D-printed models. The performed quantitative assessment proved that, using the proposed training procedure, the results of the in vivo surgery are not significantly different (p = 0.089) with regard to the ex vivo simulation for both the mezio-distal position of the implant and the distance from the ridge margin to sinus window. On the contrary, the operative time of Group 1 was reduced significantly (p = 0.001), with an average of 20% with regard to in vivo procedures performed without rehearsals (on the control Group 2). Conclusions: The study demonstrated that the use of 3D-printed models can be beneficial to dental surgeon practitioners, as well as to students who must be trained before performing clinical treatments.

Evaluation of available height, location, and patency of the ostium for sinus augmentation from an implant treatment planning perspective

Purpose

The objective of this study was to evaluate the amount of height available for a maxillary sinus augmentation procedure without blocking the ostium and jeopardizing the drainage of the ostiomeatal complex using cone-beam computed tomography (CBCT) imaging.

Materials and Methods

A total of 200 sinonasal complexes comprising 100 dentate and 100 edentulous scans were retrospectively assessed using CBCT. Invivo 5.0, a CBCT reconstruction program, was used for image evaluation. The coronal section demonstrating the ostiomeatal complex was selected as a reference view to perform measurements of the sinus. The measurements were done by 2 evaluators in separate sessions. Comparative analyses of measurements were performed between dentate and edentulous patients and between male and female patients.

Results

The safe height to which the sinus can be elevated without compromising the integrity of the ostiomeatal complex was calculated for each sinus. In the presence of significant mucosal thickening, the height available for augmentation was calculated by subtracting the height of mucosal thickening from the sinus floor to the location of the ostium. In this study, the available height was approximately 27.05 mm for dentate and 23.40 mm for edentulous patients. The inter-operator reliability was excellent for all the parameters evaluated.

Conclusion

This retrospective study with a limited number of patients from a single university-based site shows that CBCT is valuable in evaluating the location and patency of the ostium for planning sinus augmentation procedures for dental implant placement.

Staged Sinus Floor Elevation Using Novel Low-Crystalline Carbonate Apatite Granules: Prospective Results after 3-Year Functional Loading

The aim of this study was to evaluate clinical outcomes of staged sinus floor elevation (SFE) using novel low-crystalline carbonate apatite (CO₃Ap) granules. Patients who needed SFE for implant placement were recruited into this clinical trial. A staged procedure (lateral window technique using CO₃Ap granules, followed by implant placement after 7 ± 2 months) was employed in 13 patients. Bone-height increase and insertion torque values (ITVs) were assessed along with histological evaluation. The survival and success rates of 3-year functioning implants were also evaluated. Mean of bone-height increase after SFE using CO₃Ap granules was 7.2 ± 2.5 mm and this increase allowed implant placement in all cases (17 implants). Mean of ITV was 25.1 ± 13.2 Ncm and primary stability was achieved successfully in all cases. Histological analyses revealed mature new bone formation (36.8 ± 17.3%) and residual CO₃Ap granules (16.2 ± 10.1%) in the compartment after SFE. The survival and success rates after 3-year functional loading were 100% and no complications were found. These results clearly indicate the clinical usefulness of CO₃Ap granules for SFE.

Long-Term Clinical Study of Implants Placed in Maxillary Sinus Floor Augmentation Using Beta-Tricalcium Phosphate

Introduction. The aim of this study was to show the long-term clinical outcomes of implants placed in maxillary sinus floor augmentation (MFSA) using beta-tricalcium phosphate (β-TCP). Patients and methods. Maxillary patients were diagnosed for MFSA and used beta- β-TCP. After the lateral sinus surgery, implants were loaded at 6 months with restorations. The clinical follow-up was at 10 years. Results. One hundred and one patients (58 females and 43 males) were treated with MFSA. Twenty-nine patients (28.7%) had a history of periodontitis. Thirty-three patients (32.7%) were smokers. One hundred and twenty-one MFSA, 81 unilateral and 20 bilateral sites, with 234 implants were performed. The average vertical bone height available was 4.92 ± 1.83 mm. The average vertical bone gain obtained was 6.95 ± 2.19 mm following MFSA. The implant cumulative survival rate was 97.2%. Three implants (1.3%) were lost during the healing period. Six implants (2.6%) were lost by peri-implantitis. One hundred and fifteen restorations were placed in the patients. Mean marginal bone loss was 1.93 mm ± 1.03 mm. Six patients (27.3%) showed technical complications. Thirty-six implants (15.3%) in 14 patients (13.9%) were associated with peri-implantitis. Conclusions. This study indicates that treatment with implant-supported restoration by MFSA using β-TCP constitutes a successful implant approach.

Immediate implant placement following tooth extraction with simultaneous lateral sinus augmentation: a retrospective clinical study after at least 1 year of loading

Background

Lateral sinus augmentation is necessary when the residual bone height is insufficient in the posterior maxilla. Immediate implant placement following tooth extraction with lateral sinus augmentation will shorten the number of operations and treatment time.

Purpose

To evaluate radiologic and clinical results for at least 1 year after loading in patients who underwent tooth extraction, implant placement, and lateral sinus augmentation at the same time.

Materials and methods

We retrospectively evaluated 35 implants placed in 25 patients. Preoperative and postoperative CBCT were compared and analyzed for residual bone height (RBH) and increased bone height (IBH), the initial torque value (ITV), and the implant stability quotient (ISQ). A comparative evaluation was performed between a 1-stage (non-submerged) group and a 2-stage (submerged) group. After loading for at least 1 year, clinical and radiological evaluations were performed to evaluate the survival rate.

Results

One of the 35 implants failed in osseointegration, and the remaining 34 showed successful results. The failure-free survival rate at 1 year was 97.06% (95% CI, 91.38-100.0%). The RBH ranged from 3.1 to 9.6 mm (mean, 5.62 ± 1.68 mm), and the IBH ranged from 3 to 15.3 mm (mean, 8.87 ± 2.74 mm). Among the RBH, ITV, ISQ, treatment period, final bone height, and failure evaluation by stage of implant placement, only ISQ showed statistical significance between the groups (p < .001). A comparison of RBH, ITV, and ISQ, regardless of group, showed that each value tended to increase, but there were no statistically significant differences.

Conclusions

Immediate implant placement following tooth extraction with simultaneous lateral sinus augmentation is considered reliable even though the procedures had been performed at the same time.

Argon Bioactivation of Implants Installed Simultaneously to Maxillary Sinus Lifting without Graft. An Experimental Study in Rabbits

Background: The treatment of the surface of titanium implants with argon plasma improved its hydrophilicity and cell adhesion, resulting in higher bone apposition on implant and graft surfaces. The spontaneous perforation over time of the sinus mucosa after sinus augmentation has been documented in experimental studies at both implants and graft particles. The aim of the present study was to evaluate the influence of plasma argon treatment of the implant surface on bone apposition and on the rate of sinus mucosa perforations. Methods: A sinus lifting procedure was performed bilaterally in sixteen rabbits, and implants, either treated with argon plasma or left without treatment (control), were placed simultaneously without grafts. After 8 weeks, histological analyses were carried out. Results: A collapse of the sinus mucosa was observed at all implants. Twenty-four out of thirty-two implants presented sinus mucosa perforations at the apex. Several perforations were also found at the threads. Thinned mucosa sites (width < 40 µm) were found around almost all implants. About 2.6–2.9 mm of the apical regions of the implant did not present signs of osseointegration and about 1.3 mm were exposed to the sinus cavity. No statistically significant differences were found between plasma and control sites. Conclusions: In conclusion, the sinus mucosa was damaged and perforated by direct contact with treated and non-treated implant surfaces. The treatment of the implant surface with argon plasma did not affect the outcomes.

Advantages of Porcine Xenograft over Autograft in Sinus Lift: A Randomised Clinical Trial

This study aimed to compare the performance of intra-oral autologous bone grafts versus porcine xenografts in a two-step lateral window sinus lift. This split-mouth randomised controlled trial sequentially enrolled 12 patients with a 6-month follow-up. For each patient, a simultaneous randomised bilateral maxillary sinus lift was performed and filled with autologous bone from the mandible (control) or a porcine xenograft (test). A bone biopsy sample was collected during the implant placement for histological and histomorphometric analysis. CT scans were performed at the beginning and at the end of the trial to assess radiological evolution. A comparison of initial and six-month CT scans indicated statistically significant increases in bone level for both materials (7.8 ± 2.4 mm for autologous and 8.7 ± 2.2 mm for xenograft, p < 0.05), and there were no significant differences between the performance of the two materials over time (p = 0.26). The histological analysis showed various stages of the remodelling process and no cells or other signs of inflammation or infection were visible in both groups. The porcine xenografts presented similar results for the studied variables when compared to autologous bone, being a reasonable alternative for a sinus lift.

A retrospective preliminary histomorphometric and clinical investigation on sinus augmentation using enzyme-deantigenic, collagen-preserving equine bone granules and plasma rich in growth factors

Background

Enzyme-deantigenic equine bone (EDEB) is a substitute of autogenous bone. Mixing it with plasma rich in growth factors (PRGF) seems a viable option to achieve enhanced bone formation in alveolar bone augmentation surgeries. This retrospective study aims to first report the histomorphometric and clinical outcomes achieved when using the EDEB/PRGF mixture for performing sinus augmentation procedures followed by delayed implant placement.

Materials and methods

Records of 11 patients who underwent 14 sinus augmentation surgeries using EDEB/PRGF followed by delayed implant placement were retrospectively collected and analyzed to assess histomorphometric data concerning newly formed bone (NFB) and residual biomaterial (RB) recorded at implant placement, marginal bone loss (MBL) values of implants placed in the augmented sinuses, and implant and prosthetic success and survival rates.

Results

At 5.6 ± 1.1 months after grafting, NFB and RB were 34.0 ± 9.1% and 11.3 ± 2.2% respectively, and no histologic signs of inflammation or immune reaction were observed in any of the 34 bone biopsies being collected. Further, 86.5 ± 4.3 months after implant placement, MBL was 0.40 ± 0.07 mm. No implant or prosthesis failed, and the implant success and survival rates were 100%

Conclusions

Within the limitations of the present study, grafting EDEB/PRGF for lateral sinus augmentation and delayed implant placement seems to be safe. Compared to published data concerning EDEB alone, results of the present study do not suggest that the EDEB/PRGF combination may provide a histomorphometric or medium-/long-term clinical advantage.

Maxillary Sinus Augmentation Using Ceramic Alloplastic Granules or Paste: An Experimental Study in Rabbits

BACKGROUND

Due to the lack of data comparing the biological behavior of two formulations, granules and paste, of alloplastic graft from microtomographic and histomorphometric points of view, the aim of the present experiment was to compare the histomorphometric and microtomographic healing of two formulations, i.e., granules (MR sites) or paste (MR-inject sites) of an alloplastic graft composed of a combination of beta-tricalcium phosphate and hydroxyapatite used for maxillary sinus lifting.

METHODS

A sinus lifting procedure was carried out bilaterally in 20 rabbits, and the elevated space was filled with either paste or granules of an alloplastic material. A collagen membrane was placed on the antrostomy and the animals were euthanized after 2 or 10 weeks, 10 animals each group. Microtomographic and histological analyses were performed.

RESULTS

Higher proportions of new bone formation were found at the MR, compared to the MR-inject sites both after 2 weeks (2.65 ± 2.89% vs. 0.08 ± 0.12%; p < 0.01) and 10 weeks of healing (34.20 ± 13.86 vs. 23.28 ± 10.35%; p = 0.022).

CONCLUSIONS

It was concluded that new bone formation was faster in the MR sites, compared to the MR-inject. However, a longer time of healing should be allowed to make final conclusions about the efficiency in bone formation of the paste formulation of the biomaterial used in the present study.

Influence of different incision designs on bone increment of guided bone regeneration (Bio-Gide collagen membrane +Bio-OSS bone powder) during the same period of maxillary anterior tooth implantation

Exploring the influence of different incision designs on bone increment of guided bone regeneration [Bio-Gide collagen membrane +Bio-OSS bone powder (carbonate apatite crystal extracted from bovine bones), Bio-OSS bone meal was placed on the surface of the bone defect and then covered with a Bio-Gide membrane to close the wound] during the same period of maxillary anterior tooth implantation. The 99 patients from the stomatology department were divided into 3 groups: small incision (N = 30, group A), wide incision (N = 39, group B), internal gingival sulcus incision (N = 30, group C). At the different time (immediately after surgery, 6 months, 12 months and 24 months), the width and height of labial bone at different implant margin (2 mm, 4 mm, 6 mm) has no significant difference in comparison of any two of the three groups (p > 0.05). The score of esthetic feeling in group A was significant higher than group C (P < 0.05). The PPD, the incidence of SH, BOP in group A were all significant higher than group B (P < 0.05). The PISm, PISd, PPD, the incidence of SH and BOP in group A were all significant higher than group C (P < 0.05). The PISm, PISd, PPD, the incidence of SH and BOP in group B were all significant higher than group C (P < 0.05). The three groups has no significant different on the influence bone increment. The soft tissue condition around the implant after surgery was better in internal gingival crevicular incision than others two incisions, large-scale incision better than small incisions.

Case Report: Histological and Histomorphometrical Results of a 3-D Printed Biphasic Calcium Phosphate Ceramic 7 Years After Insertion in a Human Maxillary Alveolar Ridge

Introduction: Dental implant placement can be challenging when insufficient bone volume is present and bone augmentation procedures are indicated. The purpose was to assess clinically and histologically a specimen of 30%HA-60%β-TCP BCP 3D-printed scaffold, after 7-years.

Case Description: The patient underwent bone regeneration of maxillary buccal plate with 3D-printed biphasic-HA block in 2013. After 7-years, a specimen of the regenerated bone was harvested and processed to perform microCT and histomorphometrical analyses.

Results: The microarchitecture study performed by microCT in the test-biopsy showed that biomaterial volume decreased more than 23% and that newly-formed bone volume represented more than 57% of the overall mineralized tissue. Comparing with unloaded controls or peri-dental bone, Test-sample appeared much more mineralized and bulky. Histological evaluation showed complete integration of the scaffold and signs of particles degradation. The percentage of bone, biomaterials and soft tissues was, respectively, 59.2, 25.6, and 15.2%. Under polarized light microscopy, the biomaterial was surrounded by lamellar bone. These results indicate that, while unloaded jaws mimicked the typical osteoporotic microarchitecture after 1-year without loading, the BCP helped to preserve a correct microarchitecture after 7-years.

Conclusions: BCP 3D-printed scaffolds represent a suitable solution for bone regeneration: they can lead to straightforward and less time-consuming surgery, and to bone preservation.