Comparison of readily available scaffolds for adipose tissue engineering using adipose-derived stem cells

Three dimensional porous scaffolds derived from collagen, elastin and fibrin proteins orchestrate adipose tissue regeneration

Current gold standard to treat soft tissue injuries caused by trauma and pathological condition are autografts and off the shelf fillers, but they have inherent weaknesses like donor site morbidity, immuno-compatibility and graft failure. To overcome these limitations, tissue-engineered polymers are seeded with stem cells to improve the potential to restore tissue function. However, their interaction with native tissue is poorly understood so far. To study these interactions and improve outcomes, we have fabricated scaffolds from natural polymers (collagen, fibrin and elastin) by custom-designed processes and their material properties such as surface morphology, swelling, wettability and chemical cross-linking ability were characterised. By using 3D scaffolds, we comprehensive assessed survival, proliferation and phenotype of adipose-derived stem cells in vitro. In vivo, scaffolds were seeded with adipose-derived stem cells and implanted in a rodent model, with X-ray microtomography, histology and immunohistochemistry as read-outs. Collagen-based materials showed higher cell adhesion and proliferation in vitro as well as higher adipogenic properties in vivo. In contrast, fibrin demonstrated poor cellular and adipogenesis properties but higher angiogenesis. Elastin formed the most porous scaffold, with cells displaying a non-aggregated morphology in vitro while in vivo elastin was the most degraded scaffold. These findings of how polymers present in the natural polymers mimicking ECM and seeded with stem cells affect adipogenesis in vitro and in vivo can open avenues to design 3D grafts for soft tissue repair.

In situ Adipogenesis in Biomaterials Without Cell Seeds: Current Status and Perspectives

For cosmetic and reconstructive purposes in the setting of small-volume adipose tissue damage due to aging, traumatic defects, oncological resections, and degenerative diseases, the current strategies for soft tissue replacement involve autologous fat grafts and tissue fillers with synthetic, bioactive, or tissue-engineered materials. However, they all have drawbacks such as volume shrinkage and foreign-body responses. Aiming to regenerate bioactive vascularized adipose tissue on biomaterial scaffolds, adipose tissue engineering (ATE) has emerged as a suitable substitute for soft tissue repair. The essential components of ATE include scaffolds as support, cells as raw materials for fat formation, and a tolerant local environment to allow regeneration to occur. The commonly loaded seeding cells are adipose-derived stem cells (ASCs), which are expected to induce stable and predictable adipose tissue formation. However, defects in stem cell enrichment, such as donor-site sacrifice, limit their wide application. As a promising alternative approach, cell-free bioactive scaffolds recruit endogenous cells for adipogenesis. In biomaterials without cell seeds, the key to sufficient adipogenesis relies on the recruitment of endogenous host cells and continuous induction of cell homing to scaffolds. Regeneration, rather than repair, is the fundamental dominance of an optimal mature product. To induce in situ adipogenesis, many researchers have focused on the mechanical and biochemical properties of scaffolds. In addition, efforts to regulate an angiogenic and adipogenic microenvironment in cell-free settings involve integrating growth factors or extracellular matrix (ECM) proteins onto bioactive scaffolds. Despite the theoretical feasibility and encouraging results in animal models, few of the reported cell-free biomaterials have been tested in humans, and failures of decellularized adipose tissues in adipogenesis have also been reported. In these cases, the most likely reason was the lack of supporting vasculature. This review summarizes the current status of biomaterials without cell seeds. Related mechanisms and influencing factors of in situ adipogenesis in cell-free biomaterials, dilemma in the development of biomaterials, and future perspectives are also addressed.

Rhinoplasty with Fillers and Fat Grafting

Nonsurgical rhinoplasty is one choice for cases in which open surgery may be harmful, the deformity is not indicated to correct with open surgery, or in patients who have phobia of general anesthesia or any type of surgery. Autologous fat injection or fillers are most common materials currently available in the market. In this article, we explain the indications, contraindications, methods, and complications of this treatment.

Hyaluronic Acid: Redefining Its Role

The discovery of several unexpected complex biological roles of hyaluronic acid (HA) has promoted new research impetus for biologists and, the clinical interest in several fields of medicine, such as ophthalmology, articular pathologies, cutaneous repair, skin remodeling, vascular prosthesis, adipose tissue engineering, nerve reconstruction and cancer therapy. In addition, the great potential of HA in medicine has stimulated the interest of pharmaceutical companies which, by means of new technologies can produce HA and several new derivatives in order to increase both the residence time in a variety of human tissues and the anti-inflammatory properties. Minor chemical modifications of the molecule, such as the esterification with benzyl alcohol (Hyaff-11® biomaterials), have made possible the production of water-insoluble polymers that have been manufactured in various forms: membranes, gauzes, nonwoven meshes, gels, tubes. All these biomaterials are used as wound-covering, anti-adhesive devices and as scaffolds for tissue engineering, such as epidermis, dermis, micro-vascularized skin, cartilage and bone. In this review, the essential biological functions of HA and the applications of its derivatives for pharmaceutical and tissue regeneration purposes are reviewed.

Current Therapeutic Strategies for Adipose Tissue Defects/Repair Using Engineered Biomaterials and Biomolecule Formulations

Tissue engineered scaffolds for adipose restoration/repair has significantly evolved in recent years. Patients requiring soft tissue reconstruction, caused by defects or pathology, require biomaterials that will restore void volume with new functional tissue. The gold standard of autologous fat grafting (AFG) is not a reliable option. This review focuses on the latest therapeutic strategies for the treatment of adipose tissue defects using biomolecule formulations and delivery, and specifically engineered biomaterials. Additionally, the clinical need for reliable off-the-shelf therapies, animal models, and challenges facing current technologies are discussed.

Adipogenic differentiation of human adipose derived mesenchymal stem cells in 3D architectured gelatin based hydrogels (ArcGel)

Polymeric matrices mimicking multiple functions of the ECM are expected to enable a material induced regeneration of tissues. Here, we investigated the adipogenic differentiation of human adipose derived mesenchymal stem cells (hADSCs) in a 3D architectured gelatin based hydrogel (ArcGel) prepared from gelatin and L-lysine diisocyanate ethyl ester (LDI) in an one-step process, in which the formation of an open porous morphology and the chemical network formation were integrated. The ArcGel was designed to support adipose tissue regeneration with its 3D porous structure, high cell biocompatibility, and mechanical properties compatible with human subcutaneous adipose tissue. The ArcGel could support initial cell adhesion and survival of hADSCs. Under static culture condition, the cells could migrate into the inner part of the scaffold with a depth of 840±120 μm after 4 days, and distributed in the whole scaffold (2 mm in thickness) within 14 days. The cells proliferated in the scaffold and the fold increase of cell number after 7 days of culture was 2.55±0.08. The apoptotic rate of hADSCs in the scaffold was similar to that of cells maintained on tissue culture plates. When cultured in adipogenic induction medium, the hADSCs in the scaffold differentiated into adipocytes with a high efficiency (93±1%). Conclusively, this gelatin based 3D scaffold presented high cell compatibility for hADSC cultivation and differentiation, which could serve as a potential implant material in clinical applications for adipose tissue reparation and regeneration.

Combination of resveratrol-containing collagen with adipose stem cells for craniofacial tissue-engineering applications

Repair and regeneration of craniofacial tissues is particularly challenging because they comprise a complex structure of hard and soft tissues involved in intricate functions. This study combined collagen scaffolds and human adipose stem cells (hASCs) for oral mucosal and calvarial bone regeneration by using resveratrol (RSV), which affects the differentiation of mesenchymal stem cells. We have evaluated the effect of collagen scaffold-containing RSV (collagen/RSV) scaffolds both in vitro and in vivo for their wound healing and bone regeneration potential. Scanning electron microscopy and immunostaining results reveal that hASCs adhere well to and proliferate on both collagen scaffolds and collagen/RSV scaffolds. Oral mucosal lesion experiments demonstrated that the collagen/RSV scaffold is more effective in wound closure and contraction than the collagen scaffold. The micro-computed tomography (μCT) images of calvarial bone display regenerating bone in defects covered with hASCs on collagen/RSV scaffolds that are more visible than that in defects covered with hASCs on a collagen scaffolds. RSV was more effective at inducing hASC differentiation on the collagen scaffold, suggesting that collagen/RSV scaffolds can provide useful biological cues that stimulate craniofacial tissue formation.

Recent Advances on the Application of Negative Pressure External Volume Expansion in Breast Plastic Surgery

BACKGROUND

External volume expansion (EVE) has been effectively applied as an assistance to fat transplantation on breast plastic surgery. Many indicators and refinements have been made in clinical practice; meanwhile, the related mechanism and more optimized preclinical model also have been explored in experimental studies.

METHODS

A literature search was conducted using PubMed with the keywords: EVE, negative pressure, breast enlargement, breast augmentation, breast reconstruction, breast plastic surgery and breast aesthetic surgery. Studies dealing with the clinical and preclinical aspects of the subject and also in vitro experiments related to a certain period of negative pressure and adipose-derived cells were selected, and those only focused on negative pressure were excluded.

RESULTS

The indications, contraindications, complications and treatments of EVE in clinical practice were summarized. The experimental studies were mainly classified into two groups (mechanical and translational) according to their contents. Mechanical studies were further divided into inference experimental validation phase studies. For the experimental validation phase, EVE was verified to promote angiogenesis, while it still remained controversial whether it would enhance adipogenesis and cell proliferation.

CONCLUSION

Clinically, our experience is on the stage of exploration, and there is a lack of standardized guidelines on its clinical application. Experimentally, the previous studies showed some subtly different views on the functional mechanisms. However, it is not enough to regulate the clinical practice yet. Therefore, related basic studies and long-term clinical follow-up are needed.

LEVEL OF EVIDENCE IV

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Literature Review to Optimize the Autologous Fat Transplantation Procedure and Recent Technologies to Improve Graft Viability and Overall Outcome: A Systematic and Retrospective Analytic Approach

OBJECTIVE

Investigation and evaluation of the current methods and steps of autologous fat transplantation to optimize the viability of fat grafts and procedure outcome in quest of a more standardized protocol.

METHODS

A thorough literature search was performed across the CNKI, Wan Fang, PubMed, Ovid and EMBASE databases from the year 1970 to December 2014, collecting and classifying all of the autologous fat transplantation-related reports and articles, and after screening, a critical retrospective analysis was performed on the included data.

RESULTS

A total of 65 articles were included in the study. However, there were limited numbers of cases dealing with procedure-related steps such as the selection of donor sites, fat acquisition, graft treatment and methodology of transplant, resulting in a significant lack of evidence support, furthermore urging the need for more standardized protocol for the steps of autologous fat transplant to improve graft viability and overall outcome while decreasing procedure-related morbidity.

CONCLUSION

No good evidence was obtained to optimize the donor site, acquisition, processing and transplantation steps of the whole process of autologous fat transplantation. Tissue engineering and stem cell research have the potential to revolutionize the future of reconstructive surgery by replacing tissue, obviating the need for donor site morbidity. However, the use of stem cell therapies to expand and grow tissue for reconstruction must occur in the context of risk management. Balancing ease of harvest with yield and efficacy has been a delicate and often difficult trade-off which has prompted the scientific community to investigate alternative sources. However, there is much hope in the evaluation and implementation of multimodality approaches for autologous fat transplant, including thriving technologies such as ultrasound-assisted, water jet-assisted, nanotechnology-assisted liposuction in combination with revolutionary fat treatment technologies such as the VASER system.

LEVEL OF EVIDENCE IV

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Adipose‑derived stem cells and hyaluronic acid based gel compatibility, studied in vitro

Minimally invasive aesthetic and cosmetic procedures have increased in popularity. Injectable dermal fillers provide soft tissue augmentation, improve facial rejuvenation and wrinkles, and correct tissue defects. To investigate the use of adipose‑derived stem cells integrated with a hyaluronic acid based gel as a dermal filler, the present study used cytotoxicity studies, proliferation studies, adipogenic and osteogenic differentiation, apoptosis assays and scanning electron microscopy. Although hyaluronic acid induced low levels of apoptosis in adipose‑derived stem cells, its significantly promoted proliferation of adipose‑derived stem cells. Hyaluronic acid demonstrates little toxicity against adipose‑derived stem cells. Adipose‑derived stem cells were able to differentiate into adipocytes and osteoblasts. Furthermore, scanning electron microscopy revealed that adipose‑derived stem cells maintained intact structures on the surface of hyaluronic acid as well as in it, and demonstrated abundant cell attachments. The present study demonstrated the compatibility of adipose‑derived stem cells and hyaluronic acid based gels in vitro.

Delivered adipose-derived stromal cells improve host-derived adipose tissue formation in composite constructs in vivo

OBJECTIVES/HYPOTHESIS

Adipose tissue engineering aims to provide functional tissue surrogates for the restoration of soft tissue defects and contour deformities in the face. Many studies involve the delivery of cells; however, the impact and the exact role of the implanted cells is not yet fully elucidated.

STUDY DESIGN

Animal research.

METHODS

In this study, we used a mouse model for the development of volume-stable adipose tissue using polyurethane scaffolds combined with a long-term stable fibrin gel and adipose-derived stromal cells to investigate the influence of cell delivery on tissue development.

RESULTS

After 12 weeks in vivo, the emerging tissue in these constructs was shown to be exclusively of host origin by human-specific vimentin staining. Comparison of unseeded versus seeded scaffolds revealed a significant effect of the delivered cells on adipose tissue development as shown by histological staining and histomorphometric quantification of adipocytes, whereas blood vessel formation was not affected by delivery of adipose-derived stromal cells at this time point.

CONCLUSIONS

This is evidence for an indirect action of the implanted cells, providing a proadipogenic microenvironment within constructs, which was further boosted by adipogenic precultivation of the seeded constructs. Especially in peripheral areas of the constructs, the number of adipocytes was significantly elevated in seeded scaffolds compared to nonseeded controls, suggesting that the implanted cells likely triggered the invasion and differentiation of host cells. This is supported by the fact that the provision of a fat rich environment (by coverage of the constructs with a fat flap upon implantation) additionally stimulated adipose tissue formation.

LEVEL OF EVIDENCE

NA. Laryngoscope, 127:E428-E436, 2017.

Micronized Cross-Linked Human Acellular Dermal Matrices: An Effective Scaffold for Collagen Synthesis and Promising Material for Tissue Augmentation

Micronized cross-linked human acellular dermal matrices (ADMs) contain the extracellular components necessary for cell integration and tissue remodeling, and have high tensile strength and durability. We hypothesized that such material could serve as a scaffold to enhance the survival of adipocytes in grafted fat. Nude mice (n = 15) were randomly assigned to three groups, each receiving different subcutaneous injections into two dorsal paravertebral areas: fat and saline (control), fat and micronized ADM (E1), and fat and diluted micronized ADM (E2). Digital photographs were taken at 2-week intervals, and the grafted fat volumes and weights were examined after 10 weeks. A histological analysis of the grafted fat was performed, and the expression of vascular endothelial growth factor (VEGF) was examined. The grafted fat volumes decreased over time in all groups; however, at 10 weeks, the grafted fat was better preserved in both experimental groups, with significantly greater weights than in the group C (both, p < 0.001). In the experimental groups, there was more regular arrangement of collagen in the graft tissue, whereas relatively thin, disorderly collagen deposition was observed in the control group. In addition, VEGF expression was significantly greater in the experimental groups than in the control group (p < 0.001). These results are the first to show that micronized cross-linked human ADMs are an excellent scaffold for promoting adipocyte survival and may be an option for maintaining or promoting the in vivo survival of grafted fat.

The regenerative role of adipose-derived stem cells (ADSC) in plastic and reconstructive surgery

The potential use of stem cell-based therapies for the repair and regeneration of various tissues and organs offers a paradigm shift in plastic and reconstructive surgery. The use of either embryonic stem cells (ESC) or induced pluripotent stem cells (iPSC) in clinical situations is limited because of regulations and ethical considerations even though these cells are theoretically highly beneficial. Adult mesenchymal stem cells appear to be an ideal stem cell population for practical regenerative medicine. Among these cells, adipose-derived stem cells (ADSC) have the potential to differentiate the mesenchymal, ectodermal and endodermal lineages and are easy to harvest. Additionally, adipose tissue yields a high number of ADSC per volume of tissue. Based on this background knowledge, the purpose of this review is to summarise and describe the proliferation and differentiation capacities of ADSC together with current preclinical data regarding the use of ADSC as regenerative tools in plastic and reconstructive surgery.

Adipose regeneration and implications for breast reconstruction: update and the future

The evolution of breast reconstruction and management of breast cancer has evolved significantly since the earliest descriptions in the Edwin Smith Papyrus (3,000 BC). The development of surgical and scientific expertise has changed the way that women are managed, and plastic surgeons are now able to offer a wide range of reconstructive options to suit individual needs. Beyond the gold standard autologous flap based reconstructions, regenerative therapies promise the elimination of donor site morbidity whilst providing equivalent aesthetic and functional outcomes. Future research aims to address questions regarding ideal cell source, optimisation of scaffold composition and interaction of de novo adipose tissue in the microenvironment of breast cancer.

Additive manufacturing of collagen scaffolds by three-dimensional plotting of highly viscous dispersions

Additive manufacturing (AM) allows the free form fabrication of three-dimensional (3D) structures with distinct external geometry, fitting into a patient-specific defect, and defined internal pore architecture. However, fabrication of predesigned collagen scaffolds using AM-based technologies is challenging due to the low viscosity of collagen solutions, gels or dispersions commonly used for scaffold preparation. In the present study, we have developed a straightforward method which is based on 3D plotting of a highly viscous, high density collagen dispersion. The swollen state of the collagen fibrils at pH 4 enabled the homogenous extrusion of the material, the deposition of uniform strands and finally the construction of 3D scaffolds. Stabilization of the plotted structures was achieved by freeze-drying and chemical crosslinking with the carbodiimide EDC. The scaffolds exhibited high shape and dimensional fidelity and a hierarchical porosity consisting of macropores generated by strand deposition as well as an interconnected microporosity within the strands as result of the freeze-drying process. Cultivation of human mesenchymal stromal cells on the scaffolds, with and without adipogenic or osteogenic stimulation, revealed their cytocompatibility and potential applicability for adipose and bone tissue engineering.

In vitro and in vivo biocompatibility, bioavailability and tolerance of an injectable vehicle for adipose-derived stem/stromal cells for plastic surgery indications

Soft tissue reconstruction is a challenge in plastic surgery, when replacing lost materials and correcting contour defects. Many permanent and temporary fillers have been used to restore the volume of these lesions, but often with poor results and even complications. Adipose-derived stem/stromal cells (ASCs) and adipose tissue engineering have been suggested as valuable alternatives. In order to inject these cultured cells, it was essential to find a suitable vehicle. The purpose of this study was to evaluate Cytocare(®), an injectable medical device, composed of hyaluronic acid plus amino acids, vitamins and mineral salts. First, ASC viability and bioavailability in the 3 different available Cytocare(®) formulations using the MTT test were assessed; then an animal experiment, testing the tolerance after intradermal injections of both Cytocare(®) alone and with ASCs was carried out. Our in vitro results demonstrate a high biocompatibility of Cytocare(®) resulting in a better viability of ASCs when cultured in Cytocare(®) compared to culture medium (p < 0.05, Mann and Whitney). Cytocare(®) also permits their bioavailability and proliferation, making it a potential transfer vehicle that can retain the cells before their integration around the recipient site. Finally, our animal experiment shows that the ASC + Cytocare(®) combination is well tolerated. In conclusion, Cytocare(®) can be used as a biocompatible scaffold for cultured ASCs in therapeutic treatments, ensuring ASC bioavailability, as well as evidence of excellent tolerance in nude mice.

Brown adipose tissue and novel therapeutic approaches to treat metabolic disorders

In humans, 2 functionally different types of adipose tissue coexist: white adipose tissue (WAT) and brown adipose tissue (BAT). WAT is involved in energy storage, whereas BAT is involved in energy expenditure. Increased amounts of WAT may contribute to the development of metabolic disorders, such as obesity-associated type 2 diabetes mellitus and cardiovascular diseases. In contrast, the thermogenic function of BAT allows high consumption of fatty acids because of the activity of uncoupling protein 1 in the internal mitochondrial membrane. Interestingly, obesity reduction and insulin sensitization have been achieved by BAT activation-regeneration in animal models. This review describes the origin, function, and differentiation mechanisms of BAT to identify new therapeutic strategies for the treatment of metabolic disorders related to obesity. On the basis of the animal studies, novel approaches for BAT regeneration combining stem cells from the adipose tissue with active components, such as melatonin, may have potential for the treatment of metabolic disorders in humans.

Therapeutic Potential of Adipose-Derived SSEA-3-Positive Muse Cells for Treating Diabetic Skin Ulcers

Stage-specific embryonic antigen-3 (SSEA-3)-positive multipotent mesenchymal cells (multilineage differentiating stress-enduring [Muse] cells) were isolated from cultured human adipose tissue-derived stem/stromal cells (hASCs) and characterized, and their therapeutic potential for treating diabetic skin ulcers was evaluated. Cultured hASCs were separated using magnetic-activated cell sorting into positive and negative fractions, a SSEA-3+ cell-enriched fraction (Muse-rich) and the remaining fraction (Muse-poor). Muse-rich hASCs showed upregulated and downregulated pluripotency and cell proliferation genes, respectively, compared with Muse-poor hASCs. These cells also released higher amounts of certain growth factors, particularly under hypoxic conditions, compared with Muse-poor cells. Skin ulcers were generated in severe combined immunodeficiency (SCID) mice with type 1 diabetes, which showed delayed wound healing compared with nondiabetic SCID mice. Treatment with Muse-rich cells significantly accelerated wound healing compared with treatment with Muse-poor cells. Transplanted cells were integrated into the regenerated dermis as vascular endothelial cells and other cells. However, they were not detected in the surrounding intact regions. Thus, the selected population of ASCs has greater therapeutic effects to accelerate impaired wound healing associated with type 1 diabetes. These cells can be achieved in large amounts with minimal morbidity and could be a practical tool for a variety of stem cell-depleted or ischemic conditions of various organs and tissues.

Increased survival of human free fat grafts with varying densities of human adipose-derived stem cells and platelet-rich plasma

The high absorption rate of transplanted fat has limited the application of autogenous fat grafts in the clinical setting. Therefore, this study aimed to evaluate the effects of platelet-rich plasma (PRP) and adipose-derived stem cells (ASCs) on fat regeneration by investigating the impact of PRP and conditioned medium on the biological characteristics of ASCs. Fat grafts were prepared with ASCs at densities of 10⁷ /ml, 10⁶ /ml, 10⁵ /ml, 10⁴ /ml and 0/ml with and without PRP and injected subcutaneously into nude mice. Liquid overflow method, haematoxylin and eosin staining, and immunohistochemical analyses were used to examine the fat grafts. The residual fat volume of the 10⁵ /ml ASC + PRP group was significantly higher than that of other treatment conditions after 90 days. Furthermore, histological examination revealed that in 10⁵ /ml ASCs-treated grafts normal adipocyte area and capillary formation were increased dramatically compared with other treatment conditions. It is concluded that fat grafts consisting of PRP and 10⁵ /ml ASCs constitute an ideal transplant strategy, which may result in decreased absorption and accelerated fat regeneration. This simple and reliable method could provide a valuable and needed tool in plastic and reconstructive surgery. Copyright © 2014 John Wiley & Sons, Ltd.

Human adipose-derived stromal cells for cell-based therapies in the treatment of systemic sclerosis

The present study was designed to evaluate the clinical outcome of cell-based therapy with cultured adipose derived stromal cells (ASCs) for the treatment of cutaneous manifestations in patients affected by systemic sclerosis (SSc). ASCs have an extraordinary developmental plasticity, including the ability to undergo multilineage differentiation and self-renewal. Moreover, ASCs can be easily harvested from small volumes of liposuction aspirate, showing great in vitro viability and proliferation rate. Here we isolated, characterized, and expanded ASCs, assessing both their mesenchymal origin and their capability to differentiate towards the adipogenic, osteogenic, and chondrogenic lineage. We developed an effective method for ASCs transplantation into sclerodermic patients by means of a hyaluronic acid (HA) solution, which allowed us to achieve precise structural modifications. ASCs were isolated from subcutaneous adipose tissue of six sclerodermic patients and cultured in a chemical-defined medium before autologous transplantation to restore skin sequelae. The results indicated that transplantation of a combination of ASCs in HA solution determined a significant improvement in tightening of the skin without complications such as anechoic areas, fat necrosis, or infections, thus suggesting that ASCs are a potentially valuable source of cells for skin therapy in rare diseases such as SSc and generally in skin disorders.

Acellular adipose matrix as a natural scaffold for tissue engineering

BACKGROUND

In conventional tissue-regeneration technologies, stem cells and/or other cells are injected into or incubated on scaffolds. In general, scaffolds can be classified into synthetic and natural polymers and natural matrices. Polymers are generally less suitable than natural matrices in terms of biocompatibility and biodegradability. A highly promising alternative may be the acellular adipose matrix (AAM), which is a natural scaffold that could mediate tissue regeneration without any artefacts. The optimal method for adipose-tissue decellularisation is described in this article.

METHODS

Discarded human adipose tissues harvested from routine operations were used. In experiment 1, four different adipose-tissue-decellularisation methods were compared and modified. In experiment 2, the most effective method was tested by using adipose-tissue blocks from various donor sites (the abdomen, chest and forearm) and of different weights (0.8, 25 and 80 g). Haematoxylin and eosin (H &E) staining, immunohistochemistry (IHC) and scanning electron microscopy were used to determine the efficacy of decellularisation.

RESULTS

In experiment 1, a method using an enzymatic digestion solution yielded complete decellularisation after some modifications. In experiment 2, the 0.8-g specimens were completely decellularised by the modified method. However, cell components remained in the 25- and 80-g specimens. The donor site had no effect on the degree of decellularisation.

CONCLUSIONS

An optimal method for adipose-tissue decellularisation is reported. Because AAM is a natural collagen scaffold that is of human origin, this report describes an important first step in a tissue-engineering innovation that may be suitable for the regeneration of various tissues.

Human adipose CD34+ CD90+ stem cells and collagen scaffold constructs grafted in vivo fabricate loose connective and adipose tissues

Stem cell based therapies for the repair and regeneration of various tissues are of great interest for a high number of diseases. Adult stem cells, instead, are more available, abundant and harvested with minimally invasive procedures. In particular, mesenchymal stem cells (MSCs) are multi-potent progenitors, able to differentiate into bone, cartilage, and adipose tissues. Human adult adipose tissue seems to be the most abundant source of MSCs and, due to its easy accessibility; it is able to give a considerable amount of stem cells. In this study, we selected MSCs co-expressing CD34 and CD90 from adipose tissue. This stem cell population displayed higher proliferative capacity than CD34(-) CD90(-) cells and was able to differentiate in vitro into adipocytes (PPARγ(+) and adiponectin(+)) and endothelial cells (CD31(+) VEGF(+) Flk1(+)). In addition, in methylcellulose without VEGF, it formed a vascular network. The aim of this study was to investigate differentiation potential of human adipose CD34(+) /CD90(+) stem cells loaded onto commercial collagen sponges already used in clinical practice (Gingistat) both in vitro and in vivo. The results of this study clearly demonstrate that human adult adipose and loose connective tissues can be obtained in vivo, highlighting that CD34(+) /CD90 ASCs are extremely useful for regenerative medicine.

Stimulation of adipogenesis of adult adipose-derived stem cells using substrates that mimic the stiffness of adipose tissue

Biochemical and biomechanical extracellular matrix (ECM) cues have recently been shown to play a role in stimulating stem cell differentiation towards several lineages, though how they combine to induce adipogenesis has been less well studied. The objective of this study was to recapitulate both the ECM composition and mechanical properties of adipose tissue in vitro to stimulate adipogenesis of human adipose-derived stem cells (ASCs) in the absence of exogenous adipogenic growth factors and small molecules. Adipose specific ECM biochemical cues have been previously shown to influence adipogenic differentiation; however, the ability of biomechanical cues to promote adipogenesis has been less defined. Decellularized human lipoaspirate was used to functionalize polyacrylamide gels of varying stiffness to allow the cells to interact with adipose-specific ECM components. Culturing ASCs on gels that mimicked the native stiffness of adipose tissue (2 kPa) significantly upregulated adipogenic markers, in the absence of exogenous adipogenic growth factors and small molecules. As substrate stiffness increased, the cells became more spread, lost their rounded morphology, and failed to upregulate adipogenic markers. Together these data imply that as with other lineages, mechanical cues are capable of regulating adipogenesis in ASCs.

Three-dimensional scaffolds for tissue engineering applications: role of porosity and pore size

Tissue engineering applications commonly encompass the use of three-dimensional (3D) scaffolds to provide a suitable microenvironment for the incorporation of cells or growth factors to regenerate damaged tissues or organs. These scaffolds serve to mimic the actual in vivo microenvironment where cells interact and behave according to the mechanical cues obtained from the surrounding 3D environment. Hence, the material properties of the scaffolds are vital in determining cellular response and fate. These 3D scaffolds are generally highly porous with interconnected pore networks to facilitate nutrient and oxygen diffusion and waste removal. This review focuses on the various fabrication techniques (e.g., conventional and rapid prototyping methods) that have been employed to fabricate 3D scaffolds of different pore sizes and porosity. The different pore size and porosity measurement methods will also be discussed. Scaffolds with graded porosity have also been studied for their ability to better represent the actual in vivo situation where cells are exposed to layers of different tissues with varying properties. In addition, the ability of pore size and porosity of scaffolds to direct cellular responses and alter the mechanical properties of scaffolds will be reviewed, followed by a look at nature's own scaffold, the extracellular matrix. Overall, the limitations of current scaffold fabrication approaches for tissue engineering applications and some novel and promising alternatives will be highlighted.

Novel macro-microporous gelatin scaffold fabricated by particulate leaching for soft tissue reconstruction with adipose-derived stem cells

The restoration of body contours as shaped by adipose tissue remains a clinical challenge specifically in patients who have experienced loss of contour due to trauma, surgical removal of tumours or congenital abnormalities. We have developed a novel macro-microporous biomaterial for use in soft tissue re-bulking and augmentation. Alginate beads provided the pore template for the construct. Incorporation, and subsequent dissolution, of the beads within a 7 % (w/v) gelatin matrix, produced a highly porous scaffold with an average pore size of 2.01 ± 0.08 mm. The ability of this scaffold to support the in vitro growth and differentiation of human adipose-derived stem cells (ADSCs) was then investigated. Histological analysis confirmed that the scaffold itself provided a suitable environment to support the growth of ADSCs on the scaffold walls. When delivered into the macropores in a fibrin hydrogel, ADSCs proliferated and filled the pores. In addition, ADSCs could readily be differentiated along the adipogenic lineage. These results therefore describe a novel scaffold that can support the proliferation and delivery of ADSCs. The scaffold is the first stage in developing a clinical alternative to current treatment methods for soft tissue reconstruction.

Subcutaneous fat tissue engineering using autologous adipose-derived stem cells seeded onto a collagen scaffold

BACKGROUND

This pilot study examined the efficacy of 5-bromo-2-deoxyuridine-labeled autologous adipose-derived stem cells seeded onto collagen scaffolds to augment and/or regenerate the fat-enriched hypodermal tissue in an acute porcine wound model.

METHODS

Porcine autologous adipose-derived stem cells were isolated and cultured. At passage 2, the cells were labeled with 5-bromo-2-deoxyuridine, seeded onto a three-dimensional collagen scaffold, and cultured for 10 days. Scaffolds were implanted subcutaneously in adult pigs with two adipose-derived stem cell scaffolds and two control scaffolds. Animals were euthanized at 2, 4, 8, and 12 weeks; all scaffold conditions were explanted for histology and immunohistochemistry analyses.

RESULTS

For all time points, adipose-derived stem cell scaffolds had increased connective tissue matrix within the subcutaneous tissue compared with scaffold alone and untreated porcine skin (p < 0.01). The neosynthesized connective tissue was vascularized and composed of small cells within an abundant extracellular matrix organized in layers. 5-Bromo-2-deoxyuridine cells were detectable only up to 4 weeks and mature adipocytes were absent. Levels of collagen types I, III, and VI differed among the experimental groups, with increased extracellular matrix associated with the presence of adipose-derived stem cells.

CONCLUSIONS

The authors' data clearly show the efficacy of adipose-derived stem cells for soft-tissue repair and skin aging because it induces a significant increase of the dermis thickness. Moreover, the authors' results demonstrate the interest of their acute wound model and allowed them to show the skin thickness variation over time of the experiment, which is one of the challenges with which clinicians struggle in fat grafting.

Engraftment of human adipose derived stem cells delivered in a hyaluronic acid preparation in mice

PURPOSE

To evaluate the implant of human adipose derived stem cells (ADSC) delivered in hyaluronic acid gel (HA), injected in the subcutaneous of athymic mice.

METHODS

Control implants -HA plus culture media was injected in the subcutaneous of the left sub scapular area of 12 athymic mice. ADSC implants: HA plus ADSC suspended in culture media was injected in the subcutaneous, at the contra lateral area, of the same animals. With eight weeks, animals were sacrificed and the recovered implants were processed for extraction of genomic DNA, and histological study by hematoxilin-eosin staining and immunufluorescence using anti human vimentin and anti von Willebrand factor antibodies.

RESULTS

CONTROLS

Not visualized at the injection site. An amorphous substance was observed in hematoxilin-eosin stained sections. Human vimentin and anti von Willebrand factor were not detected. No human DNA was detected. ADSC implants - A plug was visible at the site of injection. Fusiform cells were observed in sections stained by hematoxilin- eosin and both human vimentin and anti von Willebrand factor were detected by immunofluorescence. The presence of human DNA was confirmed.

CONCLUSION

The delivery of human adipose derived stem cells in preparations of hyaluronic acid assured cells engraftment at the site of injection.

Genipin-Cross-Linked Microencapsulated Human Adipose Stem Cells Augment Transplant Retention Resulting in Attenuation of Chronically Infarcted Rat Heart Fibrosis and Cardiac Dysfunction

Stem cell transplantation has been widely acknowledged for their immense potential in regenerative medicine. In these procedures, the implanted cells need to maintain both their viability and functional properties for effective therapeutic outcomes. This has long been a subject of major concern and intensive studies. Microencapsulation of stem cells within polymeric microcapsules can be an efficient approach to achieve this goal, particularly for heart diseases. This study reports the use of biocompatible, fluorogenic genipin-cross-linked alginate chitosan (GCAC) microcapsules in delivery of human adipose stem cells (hASCs) with an aim to increase the implant retention in the infarcted myocardium for maximum clinical benefits. In vitro results show, under hypoxic conditions, the microencapsulated cells overexpressed significantly higher amount of biologically active vascular endothelial growth factor (VEGF). We investigated on the in vivo potential using immunocompetent female rats after induction of myocardial infarction. For this, animal groups ( n = 8) received empty control microcapsules, 1.5 × 106 free male hASCs, or 1.5 × 106 microencapsulated male hASCs. Results show significant retention (3.5 times higher) of microencapsulated hASCs compared to free hASCs after 10 weeks of transplantation. Microencapsulated hASCs showed significantly attenuated infarct size compared to free hASCs and empty microcapsule group (21.6% ± 1.1% vs. 27.2% ± 3.1% vs. 33.3% ± 3.2%; p < 0.05), enhanced vasculogenesis, and improved cardiac function (fractional shortening: 24.2% ± 2.1% vs. 19.1% ± 0.5% vs. 12.0% ± 4.0%; p < 0.05). These data suggest that microencapsulated hASCs can contribute significantly to the improvement in cardiac functions. Their greater retentions exhibit reduced fibrosis and cardiac dysfunction in experimental animals. However, further research is needed to fully comprehend the underlying biological and immunological effects of microencapsulated hASCs, which jointly play important roles in cardiac repair.

A simple way to reconstruct a human 3-d hypodermis: a useful tool for pharmacological functionality

BACKGROUND

Adipose tissue engineering has been hampered by the inability to culture mature adipocytes. Adipose-derived stem cell (ASC) culture opens the way for the preparation of human 3-D hypodermis in large quantities. These models play a role in obesity-related active molecules and slimming agent screening. Moreover, they contribute to a better understanding of the mechanisms underpinning obesity.

MATERIALS AND METHODS

Freshly extracted ASC from fat tissue were characterized by flow cytometry for CD73, CD90, CD105, HLA-ABC, CD14 and CD45 markers and by Western blot for pref-1. Their differentiation in mature adipocytes was followed by lipid and adiponectin secretion or by oil red O staining and radioimmunoassay. Neosynthesized extracellular matrix (ECM) of 3-D hypodermis was investigated by immunohistochemistry (collagen type I, V and VI) and transmission electron microscopy.

RESULTS

Our results demonstrate that the culture of preadipocytes in proliferation medium for 15 days followed by 16 days of culture in differentiation medium allowed production of the thickest single-layer hypodermis in which preadipocytes and mature adipocytes coexist and synthesize adiponectin and ECM components. Functionality of our 3-D single-layer hypodermis was demonstrated both by a 3.5-fold glycerol production after its stimulation with norepinephrine (adrenergic agonist) and by its slimming after caffeine treatment versus the nontreated 3-D hypodermis.

CONCLUSION

This economic 3-D model, easy to prepare and giving reproducible results after the treatment of actives, is useful for pharmacotoxicological trials as an alternative to animal experimentation.

Acellular dermal matrix seeded with adipose-derived stem cells as a subcutaneous implant

BACKGROUND

Soft tissue augmentation using autologous materials usually is associated with high resorption rates. To obtain more durable soft tissue filler, acellular dermal matrix (ADM) was seeded with adipose-derived stem cells (ASCs) in this study.

METHODS

For ADM preparation, split-thickness skin was obtained from the dorsum of two Fischer rats. Harvested skin was acellularized to obtain ADM and subsequently seeded in vitro with ASCs isolated from the same rats. Subcutaneous soft tissue augmentation was carried out in the dorsal area of 20 Fischer rats. The implant materials were ADM (group 1), ADM with ASCs (group 2), collagen type 1 gel (group 3), and collagen type 1 gel with ASCs (group 4). Each specimen was harvested after 8 weeks for quantitative evaluation of thickness, vascular density, and collagen content.

RESULTS

Histologic analysis showed that ASCs were successfully seeded onto ADM. The thickness of the implanted material and the vascular density were highest 8 weeks postoperatively in group 2. The subpanniculus layer became significantly thicker in group 3 than in group 4. The collagen content was significantly higher in group 2 than in the other groups.

CONCLUSION

These findings suggest that ADM seeded with ASCs forms the best implant material in terms of volume maintenance, vascular density, and collagen content.

Current methods of adipogenic differentiation of mesenchymal stem cells

There has been a recent increase in our understanding in the isolation, culture, and differentiation of mesenchymal stem cells (MSCs). Concomitantly, the availability of MSCs has increased, with cells now commercially available, including human MSCs from adipose tissue and bone marrow. Despite an increased understanding of MSC biology and an increase in their availability, standardization of techniques for adipogenic differentiation of MSCs is lacking. The following review will explore the variability in adipogenic differentiation in vitro, specifically in 3T3-L1 and primary MSCs derived from both adipose tissue and bone marrow. A review of alternative methods of adipogenic induction is also presented, including the use of specific peroxisome proliferator-activated receptor-gamma agonists as well as bone morphogenetic proteins. Finally, we define a standard, commonly used adipogenic differentiation medium in the hopes that this will be adopted for the future standardization of laboratory techniques--however, we also highlight the essentially arbitrary nature of this decision. With the current, rapid pace of electronic publications, it becomes imperative for standardization of such basic techniques so that interlaboratory results may be easily compared and interpreted.

Transplantation of adipose tissue and stem cells: role in metabolism and disease

Humans and other mammals have three main adipose tissue depots: visceral white adipose tissue, subcutaneous white adipose tissue and brown adipose tissue, each of which possesses unique cell-autonomous properties. In contrast to visceral adipose tissue, which can induce detrimental metabolic effects, subcutaneous white adipose tissue and brown adipose tissue have the potential to benefit metabolism by improving glucose homeostasis and increasing energy consumption. In addition, adipose tissue contains adipose-derived stem cells, which possess the ability to differentiate into multiple lineages, a property that might be of value for the repair or replacement of various damaged cell types. Adipose tissue transplantation has primarily been used as a tool to study physiology and for human reconstructive surgery. Transplantation of adipose tissue is, however, now being explored as a possible tool to promote the beneficial metabolic effects of subcutaneous white adipose tissue and brown adipose tissue, as well as adipose-derived stem cells. Ultimately, the clinical applicability of adipose tissue transplantation for the treatment of obesity and metabolic disorders will reside in the achievable level of safety, reliability and efficacy compared with other treatments.

Hyaluronan benzyl ester as a scaffold for tissue engineering

Tissue engineering is a multidisciplinary field focused on in vitro reconstruction of mammalian tissues. In order to allow a similar three-dimensional organization of in vitro cultured cells, biocompatible scaffolds are needed. This need has provided immense momentum for research on “smart scaffolds” for use in cell culture. One of the most promising materials for tissue engineering and regenerative medicine is a hyaluronan derivative: a benzyl ester of hyaluronan (HYAFF^®). HYAFF^® can be processed to obtain several types of devices such as tubes, membranes, non-woven fabrics, gauzes, and sponges. All these scaffolds are highly biocompatible. In the human body they do not elicit any adverse reactions and are resorbed by the host tissues. Human hepatocytes, dermal fibroblasts and keratinocytes, chondrocytes, Schwann cells, bone marrow derived mesenchymal stem cells and adipose tissue derived mesenchymal stem cells have been successfully cultured in these meshes. The same scaffolds, in tube meshes, has been applied for vascular tissue engineering that has emerged as a promising technology for the design of an ideal, responsive, living conduit with properties similar to that of native tissue.