A new peptidyl fluorescent chemosensors for the selective detection of mercury ions based on tetrapeptide

Sulfonamides as Optical Chemosensors

Sulfonamides are auspicious chemosensors which are capable to bind with ionic species through various ways like complexation, charge transfer, proton transfer etc. and produce a detection signal in the form of an optical change either in visible or UV-light and for electronic as well as fluorimetric spectra. Sulfonamides have gained much attention of analytical chemists these days as these are inexpensive, robust, green in nature and some what sensitive and selective to many anionic and cationic species. Due to their promising versatility in sensing properties, these are under great consideration in forensic, environmental, analytical and biochemistry laboratories. This review narrates how sulfonamides are being used to optically sense ionic species.

Recent Progress in Nanoparticles Based Sensors for the Detection of Mercury (II) Ions in Environmental and Biological Samples

To maintain a green and sustainable environment for human beings, rapid detection of potentially toxic heavy metals like mercury (Hg(II)) has attracted great attention. Recently, sensors have been designed which can selectively detect Hg(II) over other common available cations and give a naked eye or fluorometric response. In the last two decades, the trend is shifting from bulky organic chemosensors toward nanoparticles due to their rapid response, low cost, eco-friendly and easy synthesis. In this review, promising nanoparticles-based sensors for Hg(II) detection are discussed. The nano-sensors are functionalized with nucleotide or other suitable materials which coordinate with Hg(II) ions and give clear color or fluorescence change. The operational mechanisms are discussed focusing on its four basic types. The nanoparticles-based sensors are even able to detect Hg in three different oxidation states (Hg(II), Hg(I) and Hg(0)). Recently, the trend has been shifted from ordinary nanoparticles to magnetic nanoparticles to simultaneously detect and remove Hg(II) ions from environmental samples. Furthermore, the nano-sensors for Hg(II) are compared with each other and with the reported organic chemosensors.

Highly sensitive fluorescence turn-OFF and reversible chemical sensor for Hg2+ ion based on pyrene appended 2-thiohydantoin

A novel fluorometric chemical sensor (PY-2TH) based on 2-thiohydantoin (2TH) in conjugation with pyrene (PY) was designed by facile one-pot Knoevenagel condensation reaction and explored for the sensitive and selective detection of Hg2+ ion in solution and solid state methods. Different analytical techniques like NMR and LC-MS concomitantly confirmed the structure of PY-2TH. Absorption and emission studies demonstrate positive solvatochromic effects indicating intramolecular charge transfer in polar solvents. PY-2TH exhibits unprecedented selectivity for detecting Hg2+ ions in tetrahydrofuran (THF) through turn-OFF fluorescence with 90% decrease in the emission intensity with a limit of detection (LOD) of ∼4.4 ppb. The mechanistic investigation through NMR and optical studies confirm the formation of a 2:1 complex between PY-2TH and Hg2+. Thin films of PY-2TH exhibits the J-aggregate formation in the solid state leading to a shift in the emission towards the near-infrared region. Further, we have demonstrated the applicability of PY-2TH for detection of Hg2+ ions and fluorescence imaging in live Zebrafish larvae and the toxicological effects are explored. Cytotoxic evaluation on Zebrafish larval cells revealed that PY-2TH is found to be non-toxic. Detailed analysis demonstrate the potential of PY-2TH for ultra-sensitive Hg2+ ion detection and removal in aqueous environments, highlighting its applicability for identification of metal contamination in live organisms and environmental toxicity.

Organic Molecules Containing N, S and O Heteroatoms as Sensors for the Detection of Hg(II) Ion; Coordination and Efficiency toward Detection

Rapid detection of potentially toxic heavy metals like Hg(II) has attracted great attention in the last few decades due to the importance to maintain a safe and sustainable environment for human beings. Coordination chemistry and concepts therein, play an important role in the detection of Hg(II). Size, charge, and nature of the donor atom and the respective cation (metal ion), are crucial in selective interactions between the sensor and metal ions. The sensors designed for the purpose, coordinate to Hg(II) ion through various donor sites, coordination causes a change in the electron density in organic molecules and results in either visible color change or enhancing/quenching fluorescence intensity. Since Hg(II) is soft metal, with d10 electron system, so majority of the sensors have soft donor sites which prefer to coordinate with Hg(II). Oxygen is also present in some chelating ligands which is least preferred coordination site, due to its hard nature. There are several reports of replacing other ligating sites by sulfur for enhanced mercury sensing. In some cases, desulfurization is being detected as clear change in spectral behavior during the sensing process. Efforts are still in progress to design and introduce a sensor with utmost sensitivity and selectivity. In this review, we made an attempt to explain the coordination aspects of Hg(II) detectors, reasons for poor efficiency and possible suggestions to improve the selection criterion of various compounds. It will help researchers to know about important concepts in designing more sensitive and selective sensors for detection of Hg(II) in environmental and biological samples.

Ultrasensitive mercury ion and biothiol detection based on Dansyl-His-Pro-Gly-Asp-NH2 fluorescent sensor

Mercury is an environmental contaminant, which is highly toxic even at extremely low concentrations. Long-term accumulation of mercury in human body will damage the central nervous system or digestive tract system. Here, a new fluorescent chemical sensor Dansyl-His-Pro-Gly-Asp-NH₂ (D-P4) was synthesized for the determination of Hg²⁺. The D-P4 sensor exhibits excellent selectivity and sensitivity to Hg²⁺ in aqueous solution with a 'turn-off' fluorescence response. Furthermore, D-P4-Hg system displays a good 'turn-on' fluorescence response to biothiols. The calculated binding constant for the 1:1 complex of D-P4 with Hg^{2 +} is 1.07 × 10⁵ M^-1, which also confirms the high affinity of D-P4 for Hg²⁺. Results indicate that the detection limit of D-P4 for Hg²⁺ is 61.0 nM, and that of D-P4-Hg system for Cys is as low as 80.0 nM.

Fluorescent peptide dH3w: A sensor for environmental monitoring of mercury (II)

Heavy metals are hazardous environmental contaminants, often highly toxic even at extremely low concentrations. Monitoring their presence in environmental samples is an important but complex task that has attracted the attention of many research groups. We have previously developed a fluorescent peptidyl sensor, dH3w, for monitoring Zn2+ in living cells. This probe, designed on the base on the internal repeats of the human histidine rich glycoprotein, shows a turn on response to Zn2+ and a turn off response to Cu2+. Other heavy metals (Mn2+, Fe2+, Ni2+, Co2+, Pb2+ and Cd2+) do not interfere with the detection of Zn2+ and Cu2+. Here we report that dH3w has an affinity for Hg2+ considerably higher than that for Zn2+ or Cu2+, therefore the strong fluorescence of the Zn2+/dH3w complex is quenched when it is exposed to aqueous solutions of Hg2+, allowing the detection of sub-micromolar levels of Hg2+. Fluorescence of the Zn2+/dH3w complex is also quenched by Cu2+ whereas other heavy metals (Mn2+, Fe2+, Ni2+, Co2+, Cd2+, Pb2+, Sn2+ and Cr3+) have no effect. The high affinity and selectivity suggest that dH3w and the Zn2+/dH3w complex are suited as fluorescent sensor for the detection of Hg2+ and Cu2+ in environmental as well as biological samples.

Novel electrochemical sensing platform for quantitative monitoring of Hg(II) on DNA-assembled graphene oxide with target recycling

This work designs a new electrochemical sensing platform for the quantitative monitoring of mercury ion (Hg(2+)) on poly-T(15) oligonucleotide-functionalized graphene oxide by coupling with DNase I-assisted target recycling amplification. The assay was carried out on the basis of T-Hg(2+)-T coordination chemistry by using target-induced dissociation of indicator-labeled poly-T(15) oligonucleotide from graphene oxide nanosheets. The electronic signal was amplified through DNase I-triggered target recycling. Experimental results indicated that the amperometric response of DNA-based sensing platform deceased with the increasing Hg(2+) concentration in the sample, and has a detection limit of 0.12nM with a dynamic working range of up to 50nM. Our strategy afforded exquisite selectivity for Hg(2+) against other environmentally related metal ions. More significantly, this methodology displayed high reproducibility and acceptable accuracy, thus representing an optional sensing scheme for the screening of Hg(2+) in environmental water samples.

Selective and Sensitive Detection of Heavy Metal Ions in 100% Aqueous Solution and Cells with a Fluorescence Chemosensor Based on Peptide Using Aggregation-Induced Emission

A fluorescent peptidyl chemosensor for the detection of heavy metal ions in aqueous solution as well as in cells was synthesized on the basis of the peptide receptor for the metal ions using an aggregation-induced emission fluorophore. The peptidyl chemosensor (1) bearing tetraphenylethylene fluorophore showed an exclusively selective turn-on response to Hg(2+) among 16 metal ions in aqueous buffered solution containing NaCl. The peptidyl chemosensor complexed Hg(2+) ions and then aggregated in aqueous buffered solution, resulting in the significant enhancement (OFF-On) of emissions at around 470 nm. The fluorescent sensor showed a highly sensitive response to Hg(2+), and about 1.0 equiv of Hg(2+) was enough for the saturation of the emission intensity change. The detection limit (5.3 nM, R(2) = 0.99) of 1 for Hg(2+) ions was lower than the maximum allowable level of Hg(2+) in drinking water by EPA. Moreover, the peptidyl chemosensor penetrated live cells and detected intracellular Hg(2+) ions by the turn-on response.

A novel fluorescent chemosensor based on tetra-peptides for detecting zinc ions in aqueous solutions and live cells

A novel fluorescent chemosensor (HL) based on tetra-peptides conjugated with dansyl groups has been designed and synthesized, which is a promising analytical tool for detecting Zn²⁺ in aqueous solutions and live cells.

Fluorescence “on–off–on” peptide-based chemosensor for the selective detection of Cu2+ and S2− and its application in living cell bioimaging

A novel fluorescence chemosensor L based on a tetra-peptide conjugated with dansyl groups has been designed as a promising analytical tool for detecting Cu²⁺ and S²⁻ in 100% aqueous solutions and living cells.

A peptide-based fluorescent chemosensor for measuring cadmium ions in aqueous solutions and live cells

A novel peptide fluorescent chemosensor (H2L) with a lysine backbone and both -NH2 sites conjugated with cysteine and dansyl groups has been designed and synthesized by solid phase peptide synthesis with Fmoc chemistry. This chemosensor is a promising analytical tool for detecting Cd(2+) based on the photo-induced electron transfer (PET) effect by turn-on response in 100% aqueous solutions. As designed, H2L exhibits excellent cell permeation and low biotoxicity as well as displaying relatively high selectivity and sensitivity. The chemosensor penetrated live HeLa cells and detected intracellular Cd(2+) by turn-on response. The binding stoichiometry and affinity, interference test, pH sensitivity, fluorescence quantum yield, quantum mechanical calculations, lifetimes, and cytotoxicity of the chemosensor H2L to Cd(2+) were also investigated. Moreover, H2L exhibits low biotoxicity with a limit of detection (LOD) for Cd(2+) of about 52 nM, implying that H2L can be used as a highly selective and sensitive peptide fluorescent chemosensor in biological systems.

Pyrene Excimer-Based Peptidyl Chemosensors for the Sensitive Detection of Low Levels of Heparin in 100% Aqueous Solutions and Serum Samples

Fluorescent chemosensors (1 and 2, Py-(Arg)nGlyGlyGly(Arg)nLys(Py)-NH2, n = 2 and 3) bearing two pyrene (Py) labeled heparin-binding peptides were synthesized for the sensitive ratiometric detection of heparin. The peptidyl chemosensors (1 and 2) sensitively detected nanomolar concentrations of heparin in aqueous solutions and in serum samples via a ratiometric response. In 100% aqueous solutions at pH 7.4, both chemosensors exhibited significant excimer emission at 486 nm as well as weak monomer emission in the absence of heparin. Upon the addition of heparin into the solution, excimer emission increased with a blue shift (10 nm) and monomer emission at 376 nm decreased. The chemosensors showed a similar sensitive ratiometric response to heparin independent of the concentration of the chemosensors. The peptidyl chemosensors were applied to the ratiometric detection of heparin over a wide range of pH (1.5-11.5) using the excimer/momomer emission changes. In the presence of serum, 1 and 2 displayed significant monomer emission at 376 nm with relatively weak excimer emission and the addition of heparin induced a significant increase in excimer emission at 480 nm and a concomitant decrease in monomer emission. The enhanced ratiometric response to heparin in the serum sample was due to the interactions between the peptidyl chemosensors and serum albumin in the serum sample. The detection limits of 2 for heparin were less than 1 nM in 100% aqueous solutions and serum samples. The peptidyl chemosensors bearing two heparin-binding sites are a suitable tool for the sensitive ratiometric detection of nanomolar concentrations of heparin in 100% aqueous solutions and serum samples.

Highly sensitive colorimetric detection of HgII and CuII in aqueous solutions: from amino acids toward solid platforms

A chemosensor (NBD-H) based on an amino acid with 7-nitro-2,1,3-benzoxadiazole was used for selective detection of Hg^II and Cu^II among 15 metal ions in aqueous solutions by a colorimetric change and fluorescence change.

Ratiometric fluorescence chemosensor based on tyrosine derivatives for monitoring mercury ions in aqueous solutions

Ratiometric fluorescent chemosensors1and2were synthesized based on tyrosine amino acid derivatives with a pyrene fluorophore.