Biomolecular sensor based on fluorescence-labeled aptamer

Fluorogenic Aptasensors with Small Molecules

Aptamers are single-stranded DNA or RNA molecules that can be identified through an iterative in vitro selection–amplification process. Among them, fluorogenic aptamers in response to small molecules have been of great interest in biosensing and bioimaging due to their rapid fluorescence turn-on signals with high target specificity and low background noise. In this review, we report recent advances in fluorogenic aptasensors and their applications to in vitro diagnosis and cellular imaging. These aptasensors modulated by small molecules have been implemented in different modalities that include duplex or molecular beacon-type aptasensors, aptazymes, and fluorogen-activating aptamer reporters. We highlight the working principles, target molecules, modifications, and performance characteristics of fluorogenic aptasensors, and discuss their potential roles in the field of biosensor and bioimaging with future directions and challenges.

Recent Developments in Aptasensors for Diagnostic Applications

Aptamers are exciting smart molecular probes for specific recognition of disease biomarkers. A number of strategies have been developed to convert target-aptamer binding into physically detectable signals. Since the aptamer sequence was first discovered, a large variety of aptamer-based biosensors have been developed, with considerable attention paid to their potential applications in clinical diagnostics. So far, a variety of techniques in combination with a wide range of functional nanomaterials have been used for the design of aptasensors to further improve the sensitivity and detection limit of target determination. In this paper, the advantages of aptamers over traditional antibodies as the molecular recognition components in biosensors for high-throughput screening target molecules are highlighted. Aptamer-target pairing configurations are predominantly single- or dual-site binding; the design of recognition modes of each aptamer-target pairing configuration is described. Furthermore, signal transduction strategies including optical, electrical, mechanical, and mass-sensitive modes are clearly explained together with examples. Finally, we summarize the recent progress in the development of aptamer-based biosensors for clinical diagnosis, including detection of cancer and disease biomarkers and in vivo molecular imaging. We then conclude with a discussion on the advanced development and challenges of aptasensors.

Structural characterization of the saxitoxin-targeting APTSTX1 aptamer using optical tweezers and molecular dynamics simulations

Optical tweezers have enabled the exploration of picoNewton forces and dynamics in single-molecule systems such as DNA and molecular motors. In this work, we used optical tweezers to study the folding/unfolding dynamics of the APTSTX1-aptamer, a single-stranded DNA molecule with high affinity for saxitoxin (STX), a lethal neurotoxin. By measuring the transition force during (un)folding processes, we were able to characterize and distinguish the conformational changes of this aptamer in the presence of magnesium ions and toxin. This work was supported by molecular dynamics (MD) simulations to propose an unfolding mechanism of the aptamer-Mg+2 complex. Our results are a step towards the development of new aptamer-based STX sensors that are potentially cheaper and more sensitive than current alternatives.

Coordination-induced structural changes of DNA-based optical and electrochemical sensors for metal ions detection

Metal ions play a critical role in human health and abnormal levels are closely related to various diseases. Therefore, the detection of metal ions with high selectivity, sensitivity and accuracy is particularly important. This article highlights and comments on the coordination-induced structural changes of DNA-based optical, electrochemical and optical-electrochemical-combined sensors for metal ions detection. Challenges and potential solutions of DNA-based sensors for the simultaneous detection of multiple metal ions are also discussed for further development and exploitation.

Salen/salan metallic complexes as redox labels for electrochemical aptasensors

We provide a new route for the functionalization of electrode supporting aptamers conjugated to a salan chelator useful in biosensor devices.

A simple and rapid chemiluminescence aptasensor for acetamiprid in contaminated samples: Sensitivity, selectivity and mechanism

Ultralow concentration and selective detection of pesticide residue is important to evaluate the environmental and biological pollution and the threat to human health which single component pesticide can bring. Herein, we report an amplified chemiluminescence (CL) sensing platform for ultrasensitive and selective acetamiprid (widely used pesticide) detection. It is based on aptamer's high binding affinity to target and the relevance between AuNPs' morphology and its catalytic effect to stimulate the generation of CL in the presence of H2O2 and luminol. Moreover, AuNPs morphological slight change induced by aptamers' conformation during targets binding could lead to the significant change of catalytic properties. Therefore, the proposed sensing platform for pesticide residue exhibited a high sensitivity toward acetamiprid with a detection limit of 62pM, which was about 100-fold lower than that of other aptamer-based sensor for acetamiprid detection. Because of the intrinsic specificity of aptamer's recognization, this sensing platform has high selectivity. So, this sensing platform provides a label-free and cost-effective approach for sensitive and selective detection of single component pesticide residue. More importantly, this CL method was successfully used to determine acetamiprid in real contaminated samples.

Facile and Cost-Effective Detection of Saxitoxin Exploiting Aptamer Structural Switching

A simple method to detect saxitoxin (STX), one of the main components of the paralytic shellfish poison from red tide, has been developed. By using a next generation dye for double-stranded DNA we were able to differentiate fluorescence from STX-binding aptamers when exposed to different concentrations of STX, suggesting a change in aptamer folding upon target binding. The developed method is extremely rapid, only requiring small sample volumes, with quantitative results in the concentration range of 15 ng/mL to 3 µg/mL of STX, with a detection limit of 7.5 ng/mL.

A facile label-free colorimetric aptasensor for acetamiprid based on the peroxidase-like activity of hemin-functionalized reduced graphene oxide

A facile aptasensor has been developed for the colorimetric detection of acetamiprid by using the hemin-functionalized reduced graphene oxide (hemin-rGO) composites. The as-prepared hemin-rGO composites possessed both the ability of rGO to physically adsorb the aptamers and the peroxidase-like activity of hemin that could catalyse 3,3,5,5-tetramethylbenzidine (TMB) in the presence of H2O2, to produce a solution with blue color. The well-dispersed hemin-rGO composites coagulated completely at the proper salt concentration; however, the coagulation of hemin-rGO was vanished when abundant aptamers were adsorbed on its surface because the attached negatively charged DNA backbone increased individual hemin-rGO electrostatic repulsion. In the detection scheme, acetamiprid with different concentrations was firstly incubated with the same amount of aptamer. The more acetamiprid in the tested solution, the less free aptamers were absorbed on the hemin-rGO surface, making the composites coagulate to a higher degree in the presence of the optimum NaCl concentration. As a consequence, the content of hemin-rGO in the supernatant was decreased after centrifugation, which catalysed oxidation of TMB in the presence of H2O2 to produce light blue color with a low absorbance. The color variation relavant to the acetamiprid concentration can be judged by the naked eyes and easily monitored by the inexpensive UV-vis spectrometer. Such designed aptasensor displayed a linear response for acetamiprid in the range from 100nM to 10μM with a detection limit of 40nM (S/N=3). This colorimetric aptasensing platform offers great advantages including the simple operation process, low-cost portable instrument, and user-friendly applications.

Optical aptasensors for quantitative detection of small biomolecules: a review

Aptasensors are aptamer-based biosensors with excellent recognition capability towards a wide range of targets. Specially, there have been ever-growing interests in the development of aptasensors for the detection of small molecules. This phenomenon is contributed to two reasons. On one hand, small biomolecules play an important role in living organisms with many kinds of biological function, such as antiarrhythmic effect and vasodilator activity of adenosine. On the other hand, the concentration of small molecules can be an indicator for disease diagnosis, for example, the concentration of ATP is closely associated with cell injury and cell viability. As a potential analysis tool in the construction of aptasensors, optical analysis has attracted much more interest of researchers due to its high sensitivity, quick response and simple operation. Besides, it promises the promotion of aptasensors in performance toward a new level. Review the development of optical aptasensors for small biomolecules will give readers an overall understanding of its progress and provide some theoretical guidelines for its future development. Hence, we give a mini-review on the advance of optical aptasensors for small biomolecules. This review focuses on recent achievements in the design of various optical aptasensors for small biomolecules, containing fluorescence aptasensors, colorimetric aptasensors, chemiluminescence aptasensors and other optical aptasensors.

Exonuclease I aided enzyme-linked aptamer assay for small-molecule detection

A novel enzyme-linked aptamer assay (ELAA) with the aid of Exonuclease I (Exo I) for colorimetric detection of small molecules was developed. The fluorescein isothiocyanate (FITC)-labeled aptamer was integrated into a double-stranded DNA (dsDNA). In the presence of target, the binding of aptamer with target protected the aptamer from Exo I degradation, which resulted in the FITC tag remaining on the aptamer. Then, the anti-FITC-HRP conjugate was used to produce an optically observable signal. By monitoring the color change, we were able to detect two model molecules, ATP and L-argininamide, with high selectivity and high sensitivity even in the serum matrix. It is expected to be a simple and general ELAA method with wide applicability.

A surface-stress-based microcantilever aptasensor

Biosensors based on microcantilevers convert biological recognition events into measurable mechanical displacements. They offer advantages such as small size, low sample volume, label-free detection, ease of integration, high-throughput analysis, and low development cost. The design and development of a microcantilever-based aptasensor employing SU-8 polymer as the fabrication material is presented in this paper. Aptamers are employed as bioreceptor elements because they exhibit superior specificity compared to antibodies due to their small size and physicochemical stability. To immobilise thrombin DNA aptamer on the bare SU-8 surface of the aptasensor, a combined plasma mode treatment method is implemented which modifies the surface of the aptasensor. Label-free detection of thrombin molecules using the fabricated aptasensor is successfully demonstrated. The measured deflection is one order of magnitude higher than that of a silicon nitride microcantilever biosensor. The developed aptasensor also demonstrates high specificity.

Advances in aptamer screening and small molecule aptasensors

It has been 20 years since aptamer and SELEX (systematic evolution of ligands by exponential enrichment) were described independently by Andrew Ellington and Larry Gold. Based on the great advantages of aptamers, there have been numerous isolated aptamers for various targets that have actively been applied as therapeutic and analytical tools. Over 2,000 papers related to aptamers or SELEX have been published, attesting to their wide usefulness and the applicability of aptamers. SELEX methods have been modified or re-created over the years to enable aptamer isolation with higher affinity and selectivity in more labor- and time-efficient manners, including automation. Initially, most of the studies about aptamers have focused on the protein targets, which have physiological functions in the body, and their applications as therapeutic agents or receptors for diagnostics. However, aptamers for small molecules such as organic or inorganic compounds, drugs, antibiotics, or metabolites have not been studied sufficiently, despite the ever-increasing need for rapid and simple analytical methods for various chemical targets in the fields of medical diagnostics, environmental monitoring, food safety, and national defense against targets including chemical warfare. This review focuses on not only recent advances in aptamer screening methods but also its analytical application for small molecules.

Aptamer-based fluorescent biosensors

Selected from random pools of DNA or RNA molecules through systematic evolution of ligands by exponential enrichment (SELEX), aptamers can bind to target molecules with high affinity and specificity, which makes them ideal recognition elements in the development of biosensors. To date, aptamer-based biosensors have used a wide variety of detection techniques, which are briefly summarized in this article. The focus of this review is on the development of aptamer-based fluorescent biosensors, with emphasis on their design as well as properties such as sensitivity and specificity. These biosensors can be broadly divided into two categories: those using fluorescently-labeled aptamers and others that employ label-free aptamers. Within each category, they can be further divided into "signal-on" and "signal-off" sensors. A number of these aptamer-based fluorescent biosensors have shown promising results in biological samples such as urine and serum, suggesting their potential applications in biomedical research and disease diagnostics.

Metal-induced specific and nonspecific oligonucleotide folding studied by FRET and related biophysical and bioanalytical implications

Metal induced nucleic acid folding has been extensively studied with ribozymes, DNAzymes, tRNA and riboswitches. These RNA/DNA molecules usually have a high content of double-stranded regions to support a rigid scaffold. On the other hand, such rigid structural features are not available for many in vitro selected or rationally designed DNA aptamers; they adopt flexible random coil structures in the absence of target molecules. Upon target binding, these aptamers adaptively fold into a compact structure with a reduced end-to-end distance, making fluorescence resonance energy transfer (FRET) a popular signaling mechanism. However, nonspecific folding induced by mono- or divalent metal ions can also reduce the end-to-end distance and thus lead to false positive results. In this study we used a FRET pair labeled Hg(II) binding DNA and monitored metal-induced folding in the presence of various cations. While nonspecific electrostatically mediated folding can be very significant, at each tested salt condition, Hg(II) induced folding was still observed with a similar sensitivity. We also studied the biophysical meaning of the acceptor/donor fluorescence ratio that allowed us to explain the experimental observations. Potential solutions for this ionic strength problem have been discussed. For example, probes designed to signal the formation of double-stranded DNA showed a lower dependency on ionic strength.

Dual-polarization interferometry for quantification of small molecules using aptamers

An interferometry-based method was developed for detection of a small molecule, argininamide. The quantification of argininamide was demonstrated using aptamers immobilized on silicone oxynitride sensor surface via avidin-biotin binding. The aptamers formed a thin film over avidin layer corresponding to a thickness of 1.2 nm, consistent with a molecular positioning of multipoint attachment to the surface. The binding of argininamide did not cause any significant changes in the thickness of the aptamer film, suggesting that the specific binding did not affect the overall conformation of the aptamer molecules after adaptive rearrangement of aptamer molecules. However, the binding results in clearly detectable changes in mass calculated from multiple parameters determined by mass deposition and structural changes. The limit of detection of the developed sensor was determined to be 5 μM. The sensor can monitor real-time changes in argininamide concentrations with high reliability and sensitivity. The model system demonstrated that a combined measurement considering structural and mass changes through interferometry-based techniques can overcome one of the major problems associated with real-time monitoring of small mass analytes.

Serum inverts and improves the fluorescence response of an aptamer beacon to various vitamin D analytes

A dominant aptamer loop structure from a library of nearly 100 candidate aptamer sequences developed against immobilized 25-hydroxyvitamin D(3) (calcidiol) was converted into a 5'-TYE 665 and 3'-Iowa black-labelled aptamer beacon. The aptamer beacon exhibited a mild 'lights on' reaction in buffer as a function of increasing concentrations of several vitamin D analogues and metabolites, with a limit of detection of approximately 200 ng/mL, and was not specific for any particular congener. In 10% or 50% human serum, the same aptamer beacon inverted its fluorescence behaviour to become a more intense 'lights off' reaction with an improved limit of detection in the range 4-16 ng/mL. We hypothesized that this drastic change in fluorescence behaviour was due to the presence of creatinine and urea in serum, which might destabilize the quenched beacon, causing an increase in fluorescence followed by decreasing fluorescence as a function of vitamin D concentrations that may bind and quench increasingly greater fractions of the denatured beacons. However, the results of several control experiments in the presence of physiological or greater concentrations of creatinine and urea, alone or combined in buffer, failed to produce the beacon fluorescence inversion. Other possible mechanistic hypotheses are also discussed.

Fluorescent aptasensors based on conformational adaptability of abasic site-containing aptamers in combination with abasic site-binding ligands

Aptamers are nucleic acids that can selectively bind to a variety of targets. Aptamers usually undergo conformational transitions from a flexible or disordered structure into a rigid or ordered structure upon target-binding. This study describes a detection method for l-argininamide (l-Arm) and adenosine based on the conformational adaptability of nucleic acid aptamers. An abasic site (AP site) was formed in the stem and close to the target-binding site of a stem-loop aptamer as an anchoring pocket for a fluorescent ligand. 3,5-Diamino-6-chloro-2-pyrazine carbonitrile (DCPC), which can bind to AP site-containing DNA duplexes by pseudo-base pairing, was utilized as a signaling reporter for the target-binding. The binding of a target to an aptamer induces the tight pairing of bases flanking the AP site, so that DCPC can effectively bind to the stem. The binding of DCPC is accompanied by a significant enhancement of its fluorescence. This new sensing method without an antisense DNA strand was demonstrated by using l-Arm and its aptamer as a model. It was confirmed that the method can sensitively detect l-Arm with a detection limit of 2.1 μM. The proposed method was also applied to adenosine detection, where the reported sequence of an adenosine aptamer was slightly modified. The method based on an AP site-containing aptamer and an AP site-binding ligand was applicable to detection of a target in horse serum.

DNA aptamer beacon assay for C-telopeptide and handheld fluorometer to monitor bone resorption

A novel DNA aptamer beacon is described for quantification of a 26-amino acid C-telopeptide (CTx) of human type I bone collagen. One aptamer sequence and its reverse complement dominated the aptamer pool (31.6% of sequenced clones). Secondary structures of these aptamers were examined for potential binding pockets. Three-dimensional computer models which analyzed docking topologies and binding energies were in agreement with empirical fluorescence experiments used to select one candidate loop for beacon assay development. All loop structures from the aptamer finalists were end-labeled with TYE 665 and Iowa Black quencher for comparison of beacon fluorescence levels as a function of CTx concentration. The optimal beacon, designated CTx 2R-2h yielded a low ng/ml limit of detection using a commercially available handheld fluorometer. The CTx aptamer beacon bound full-length 26-amino acid CTx peptide, but not a shorter 8-amino acid segment of CTx peptide which is a common target for commercial CTx ELISA kits. The prototype assay was shown to detect CTx peptide from human urine after creatinine and urea were removed by size-exclusion chromatography to prevent nonspecific denaturing of the aptamer beacon. This work demonstrates the potential of aptamer beacons to be utilized for rapid and sensitive bone health monitoring in a handheld or point-of-care format.

Nucleic acid-based fluorescent probes and their analytical potential

It is well known that nucleic acids play an essential role in living organisms because they store and transmit genetic information and use that information to direct the synthesis of proteins. However, less is known about the ability of nucleic acids to bind specific ligands and the application of oligonucleotides as molecular probes or biosensors. Oligonucleotide probes are single-stranded nucleic acid fragments that can be tailored to have high specificity and affinity for different targets including nucleic acids, proteins, small molecules, and ions. One can divide oligonucleotide-based probes into two main categories: hybridization probes that are based on the formation of complementary base-pairs, and aptamer probes that exploit selective recognition of nonnucleic acid analytes and may be compared with immunosensors. Design and construction of hybridization and aptamer probes are similar. Typically, oligonucleotide (DNA, RNA) with predefined base sequence and length is modified by covalent attachment of reporter groups (one or more fluorophores in fluorescence-based probes). The fluorescent labels act as transducers that transform biorecognition (hybridization, ligand binding) into a fluorescence signal. Fluorescent labels have several advantages, for example high sensitivity and multiple transduction approaches (fluorescence quenching or enhancement, fluorescence anisotropy, fluorescence lifetime, fluorescence resonance energy transfer (FRET), and excimer-monomer light switching). These multiple signaling options combined with the design flexibility of the recognition element (DNA, RNA, PNA, LNA) and various labeling strategies contribute to development of numerous selective and sensitive bioassays. This review covers fundamentals of the design and engineering of oligonucleotide probes, describes typical construction approaches, and discusses examples of probes used both in hybridization studies and in aptamer-based assays.

Using azobenzene incorporated DNA aptamers to probe molecular binding interactions

The rational design of DNA/RNA aptamers for use as molecular probes depends on a clear understanding of their structural elements in relation to target-aptamer binding interactions. We present a simple method to create aptamer probes that can occupy two different structural states. Then, based on the difference in binding affinity between these states, target-aptamer binding interactions can be elucidated. The basis of our two-state system comes from the incorporation of azobenzene within the DNA strand. Azobenzene can be used to photoregulate the melting of DNA-duplex structures. When incorporated into aptamers, the light-regulated conformational change of azobenzene can be used to analyze how aptamer secondary structure is involved in target binding. Azobenzene-modified aptamers showed no change in target selectivity, but showed differences in binding affinity as a function of the number, position, and conformation of azobenzene modifications. Aptamer probes that can change binding affinity on demand may have future uses in targeted drug delivery and photodynamic therapy.

Label-free aptamer-based sensors for L-argininamide by using nucleic acid minor groove binding dyes

The nucleic acid minor groove binding dyes, DAPI and Hoechst 33258, were for the first time used in label-free aptamer-based sensors for L-argininamide. The synergy binding effect results in the enhancement of fluorescence of dyes. The method for detection of L-argininamide is simple, rapid and cost-effective.

Design strategies of fluorescent biosensors based on biological macromolecular receptors

Fluorescent biosensors to detect the bona fide events of biologically important molecules in living cells are increasingly demanded in the field of molecular cell biology. Recent advances in the development of fluorescent biosensors have made an outstanding contribution to elucidating not only the roles of individual biomolecules, but also the dynamic intracellular relationships between these molecules. However, rational design strategies of fluorescent biosensors are not as mature as they look. An insatiable request for the establishment of a more universal and versatile strategy continues to provide an attractive alternative, so-called modular strategy, which permits facile preparation of biosensors with tailored characteristics by a simple combination of a receptor and a signal transducer. This review describes an overview of the progress in design strategies of fluorescent biosensors, such as auto-fluorescent protein-based biosensors, protein-based biosensors covalently modified with synthetic fluorophores, and signaling aptamers, and highlights the insight into how a given receptor is converted to a fluorescent biosensor. Furthermore, we will demonstrate a significance of the modular strategy for the sensor design.

Rationally designed aptamer-based fluorescence polarization sensor dedicated to the small target analysis

A direct fluorescence polarization (FP) assay strategy, dedicated to the small molecule sensing and based on the unique induced-fit binding mechanism of end-labelled nucleic acid aptamers, has been recently developed by our group. Small target binding has been successfully converted into a significant increase of the fluorescence anisotropy signal presumably produced by the reduction of the local motional freedom of the dye. In order to generalize the approach, a rational FP sensor methodology was established herein, by engineering instability in the secondary structure of an aptameric recognition element. The anti-adenosine DNA aptamer, labelled by a single fluorescein dye at its 3' extremity, was employed as a model functional nucleic acid probe. The terminal stem of the stem-loop structure was shortened to induce a destabilized/denatured conformation which promoted the local segmental mobility of the dye and then a significant depolarization process. Upon target binding, the structural change of the aptamer induced the formation of a stable stem-loop structure, leading to the reduction of the dye mobility and the increase in the fluorescence anisotropy signal. This reasoned approach was applied to the sensing of adenosine and adenosine monophosphate and their chiral analysis.

Simultaneously fluorescence detecting thrombin and lysozyme based on magnetic nanoparticle condensation

In this protocol, a fluorescent aptasensor based on magnetic separation for simultaneous detection thrombin and lysozyme was proposed. Firstly, one of the anti-thrombin aptamer and the anti-lysozyme aptamer were individually immobilized onto magnetic nanoparticles, acting as the protein captor. The other anti-thrombin aptamer was labeled with rhodamine B and the anti-lysozyme aptamer was labeled with fluorescein, employing as the protein report. By applying the sandwich detection strategy, the fluorescence response at 515 nm and 578 nm were respectively corresponding to lysozyme and thrombin with high selectivity and sensitivities. The fluorescence intensity was individually linear with the concentration of thrombin and lysozyme in the range of 0.13-4 nM and 0.56-12.3 nM, and the detection limits were 0.06 nM of thrombin and 0.2 nM of lysozyme, respectively. The preliminary study on simultaneous detection of thrombin and lysozyme in real plasma samples was also performed. It shows that the proposed approach has the good character for simultaneous multiple protein detection.