Quantifying sex, race, and age specific differences in bone microstructure requires measurement of anatomically equivalent regions

Preclinical Rodent Models for Human Bone Disease, Including a Focus on Cortical Bone

Preclinical models (typically ovariectomized rats and genetically altered mice) have underpinned much of what we know about skeletal biology. They have been pivotal for developing therapies for osteoporosis and monogenic skeletal conditions, including osteogenesis imperfecta, achondroplasia, hypophosphatasia, and craniodysplasias. Further therapeutic advances, particularly to improve cortical strength, require improved understanding and more rigorous use and reporting. We describe here how trabecular and cortical bone structure develop, are maintained, and degenerate with aging in mice, rats, and humans, and how cortical bone structure is changed in some preclinical models of endocrine conditions (eg, postmenopausal osteoporosis, chronic kidney disease, hyperparathyroidism, diabetes). We provide examples of preclinical models used to identify and test current therapies for osteoporosis, and discuss common concerns raised when comparing rodent preclinical models to the human skeleton. We focus especially on cortical bone, because it differs between small and larger mammals in its organizational structure. We discuss mechanisms common to mouse and human controlling cortical bone strength and structure, including recent examples revealing genetic contributors to cortical porosity and osteocyte network configurations during growth, maturity, and aging. We conclude with guidelines for clear reporting on mouse models with a goal for better consistency in the use and interpretation of these models.

Regional variation in bone mineral density of the distal radius

Objectives

This study investigates the regional variation in areal bone mineral density (aBMD) at the distal radius, a critical site for osteoporosis-related fractures. Understanding aBMD distribution is essential for accurate diagnosis and management of osteoporosis.

Methods

The study involved 261 participants aged over 50. Using dual-energy X-ray absorptiometry (DXA) scans, aBMD was recorded across contiguous regions of the distal radius. Factors considered include age, sex, and hand dominance, providing a comprehensive view of aBMD distribution.

Results

The findings indicated a consistent pattern in aBMD distribution along the radius, with a plateau around the one-third distance from the wrist. Notably, significant differences in aBMD were observed between age groups, especially among post-menopausal women. The study also recorded minor variations in aBMD between dominant and non-dominant forearms.

Conclusions

The study's insights into aBMD variation at the distal radius have implications for osteoporosis research and clinical diagnosis. It highlights the importance of standardized region of interest placement in DXA scans for accurate assessment.

Am I big boned? Bone length scaled reference data for HRpQCT measures of the radial and tibial diaphysis in White adults

Cross-sectional size of a long bone shaft influences its mechanical properties. We recently used high-resolution peripheral quantitative computed tomography (HRpQCT) to create reference data for size measures of the radial and tibial diaphyses. However, data did not take into account the impact of bone length. Human bone exhibits relatively isometric allometry whereby cross-sectional area increases proportionally with bone length. The consequence is that taller than average individuals will generally have larger z-scores for bone size outcomes when length is not considered. The goal of the current work was to develop a means of determining whether an individual's cross-sectional bone size is suitable for their bone length. HRpQCT scans performed at 30 % of bone length proximal from the distal end of the radius and tibia were acquired from 1034 White females (age = 18.0 to 85.3 y) and 392 White males (age = 18.4 to 83.6 y). Positive relationships were confirmed between bone length and cross-sectional areas and estimated mechanical properties. Scaling factors were calculated and used to scale HRpQCT outcomes to bone length. Centile curves were generated for both raw and bone length scaled HRpQCT data using the LMS approach. Excel-based calculators are provided to facilitate calculation of z-scores for both raw and bone length scaled HRpQCT outcomes. The raw z-scores indicate the magnitude that an individual's HRpQCT outcomes differ relative to expected sex- and age-specific values, with the scaled z-scores also considering bone length. The latter enables it to be determined whether an individual or population of interest has normal sized bones for their length, which may have implications for injury risk. In addition to providing a means of expressing HRpQCT bone size outcomes relative to bone length, the current study also provides centile curves for outcomes previously without reference data, including tissue mineral density and moments of inertia.

Fixed and Relative Positioning of Scans for High Resolution Peripheral Quantitative Computed Tomography

INTRODUCTION

High resolution peripheral quantitative computed tomography (HR-pQCT) imaging protocol requires defining where to position the ∼1 cm thick scan along the bone length. Discrepancies between the use of two positioning methods, the relative and fixed offset, may be problematic in the comparison between studies and participants. This study investigated how bone landmarks scale linearly with length and how this scaling affects both positioning methods aimed at providing a consistent anatomical location for scan acquisition.

METHODS

Using CT images of the radius (N = 25) and tibia (N = 42), 10 anatomical landmarks were selected along the bone length. The location of these landmarks was converted to a percent length along the bone, and the variation in their location was evaluated across the dataset. The absolute location of the HR-pQCT scan position using both offset methods was identified for all bones and converted to a percent length position relative to the HR-pQCT reference line for comparison. A secondary analysis of the location of the scan region specifically within the metaphysis was explored at the tibia.

RESULTS

The location of landmarks deviated from a linear relationship across the dataset, with a range of 3.6 % at the radius sites, and 4.5 % at the tibia sites. The consequent variation of the position of the scan at the radius was 0.6 % and 0.3 %, and at the tibia 2.4 % and 0.5 %, for the fixed and relative offset, respectively. The position of the metaphyseal junction with the epiphysis relative to the scan position was poorly correlated to bone length, with R2 = 0.06 and 0.37, for the fixed and relative offset respectively.

CONCLUSION

The variation of the scan position by either method is negated by the intrinsic variation of the bone anatomy with respect both to total bone length as well as the metaphyseal region. Therefore, there is no clear benefit of either offset method. However, the lack of difference due to the inherent variation in the underlying anatomy implies that it is reasonable to compare studies even if they are using different positioning methods.

Regulation of Bone by Mechanical Loading, Sex Hormones, and Nerves: Integration of Such Regulatory Complexity and Implications for Bone Loss during Space Flight and Post-Menopausal Osteoporosis

During evolution, the development of bone was critical for many species to thrive and function in the boundary conditions of Earth. Furthermore, bone also became a storehouse for calcium that could be mobilized for reproductive purposes in mammals and other species. The critical nature of bone for both function and reproductive needs during evolution in the context of the boundary conditions of Earth has led to complex regulatory mechanisms that require integration for optimization of this tissue across the lifespan. Three important regulatory variables include mechanical loading, sex hormones, and innervation/neuroregulation. The importance of mechanical loading has been the target of much research as bone appears to subscribe to the "use it or lose it" paradigm. Furthermore, because of the importance of post-menopausal osteoporosis in the risk for fractures and loss of function, this aspect of bone regulation has also focused research on sex differences in bone regulation. The advent of space flight and exposure to microgravity has also led to renewed interest in this unique environment, which could not have been anticipated by evolution, to expose new insights into bone regulation. Finally, a body of evidence has also emerged indicating that the neuroregulation of bone is also central to maintaining function. However, there is still more that is needed to understand regarding how such variables are integrated across the lifespan to maintain function, particularly in a species that walks upright. This review will attempt to discuss these regulatory elements for bone integrity and propose how further study is needed to delineate the details to better understand how to improve treatments for those at risk for loss of bone integrity, such as in the post-menopausal state or during prolonged space flight.

Reference data and calculators for second-generation HR-pQCT measures of the radius and tibia at anatomically standardized regions in White adults

High-resolution peripheral quantitative computed tomography (HR-pQCT) is a powerful tool to assess bone health. To determine how an individual's or population of interest's HR-pQCT outcomes compare to expected, reference data are required. This study provides reference data for HR-pQCT measures acquired in a population of White adults.

PURPOSE

To provide age- and sex-specific reference data for high-resolution peripheral quantitative computed tomography (HR-pQCT) measures of the distal and diaphyseal radius and tibia acquired using a second-generation scanner and percent-of-length offsets proximal from the end of the bone.

METHODS

Data were acquired in White adults (aged 18-80 years) living in the Midwest region of the USA. HR-pQCT scans were performed at the 4% distal radius, 30% diaphyseal radius, 7.3% distal tibia, and 30% diaphyseal tibia. Centile curves were fit to the data using the LMS approach.

RESULTS

Scans of 867 females and 317 males were included. The fitted centile curves reveal HR-pQCT differences between ages, sexes, and sites. They also indicate differences when compared to data obtained by others using fixed length offsets. Excel-based calculators based on the current data were developed and are provided to enable computation of subject-specific percentiles, z-scores, and t-scores and to plot an individual's outcomes on the fitted curves. In addition, regression equations are provided to convert estimated failure load acquired with the conventional criteria utilized with first-generation scanners and those specifically developed for second-generation scanners.

CONCLUSION

The current study provides unique data and resources. The combination of the reference data and calculators provide clinicians and investigators an ability to assess HR-pQCT outcomes in an individual or population of interest, when using the described scanning and analysis procedure. Ultimately, the expectation is these data will be expanded over time so the wealth of information HR-pQCT provides becomes increasingly interpretable and utilized.

Fabric-elasticity relationships of tibial trabecular bone are similar in osteogenesis imperfecta and healthy individuals

Osteogenesis Imperfecta (OI) is an inherited form of bone fragility characterised by impaired synthesis of type I collagen, altered trabecular bone architecture and reduced bone mass. High resolution peripheral computed tomography (HR-pQCT) is a powerful method to investigate bone morphology at peripheral sites including the weight-bearing distal tibia. The resulting 3D reconstructions can be used as a basis of micro-finite element (FE) or homogenized finite element (hFE) models for bone strength estimation. The hFE scheme uses homogenized local bone volume fraction (BV/TV) and anisotropy information (fabric) to compute healthy bone strength within a reasonable computation time using fabric-elasticity relationships. However, it is unclear if these relationships quantified previously for healthy controls are valid for trabecular bone from OI patients. Thus, the aim of this study is to investigate fabric-elasticity relationships in OI trabecular bone compared to healthy controls. In the present study, the morphology of distal tibiae from 50 adults with OI were compared to 120 healthy controls using second generation HR-pQCT. Six cubic regions of interest (ROIs) were selected per individual in a common anatomical region. A first matching between OI and healthy control group was performed by selecting similar individuals to obtain identical mean and median age and sex distribution. It allowed us to perform a first morphometric analysis and compare the outcome with literature. Then, stiffness tensors of the ROIs were computed using μFE and multiple linear regressions were performed with the Zysset-Curnier orthotropic fabric-elasticity model. An initial fit was performed on both the OI group and the healthy control group using all extracted ROIs. Then, data was filtered according to a fixed threshold for a defined coefficient of variation (CV) assessing ROI heterogeneity and additional linear regressions were performed on these filtered data sets. These full and filtered data were in turn compared with previous results from μCT reconstructions obtained in other anatomical locations. Finally, the ROIs of both groups were matched according to their BV/TV and degree of anisotropy (DA). Linear regressions were performed using these matched data to detect statistical differences between the two groups. Compared to healthy controls, we found the OI samples to have significantly lower BV/TV and trabecular number (Tb.N.), significantly higher CV, trabecular separation (Tb.Sp.) and trabecular separation standard deviation (Tb.Sp.SD), but no differences in trabecular thickness (Tb.Th.). These results are in agreement with previous studies. The stiffnesses of highly heterogeneous ROIs were randomly lower with respect to the fabric-elasticity relationships, which reflects the limit of validity of the computational homogenisation methodology. This limitation does not challenge the fabric-elasticity relationship, which extrapolation to heterogeneous ROIs is probably reasonable but can simply not be evaluated with the employed homogenisation methodology. Moreover, due to their low BV/TV, the potential (unknown) errors on these heterogeneous ROIs would have negligible influence on whole bone stiffness in comparison to homogeneous ROIs which are orders of magnitude stiffer. The filtering of highly heterogeneous ROIs removed these low stiffness ROIs and led to similar correlation coefficients for both OI and healthy groups. Finally, the BV/TV and DA matched data revealed no significant differences in fabric-elasticity parameters between OI and healthy individuals. Moreover, the filtering step did not exclude a particular OI type. Compared to previous studies, the stiffness constants from the 61 μm resolution HR-pQCT ROIs were lower than for the 36 μm resolution μCT ROIs. In conclusion, OI trabecular bone of the distal tibia was shown to be significantly more heterogeneous and have a lower BV/TV than healthy controls. Despite the reduced linear regression parameters found for HR-pQCT images, the fabric-elasticity relationships between OI and healthy individuals are similar when the trabecular bone ROIs are sufficiently homogeneous to perform the computational stiffness analysis. Accordingly, the elastic properties used for FEA of healthy bones are also valid for OI bones.

The effect of denosumab and alendronate on trabecular plate and rod microstructure at the distal tibia and radius: A post-hoc HR-pQCT study

BACKGROUND

Age-related trabecular microstructural deterioration and conversion from plate-like trabeculae to rod-like trabeculae occur because of unbalanced rapid remodeling. As denosumab achieves greater remodeling suppression and lower cortical porosity than alendronate, we hypothesized that denosumab might also preserve trabecular plate microstructure, bone stiffness and strength more effectively than alendronate.

METHODS

In this post hoc analysis of a phase 2 study, postmenopausal women randomized to placebo (P, n = 74), denosumab (D, n = 72), or alendronate (A, n = 68). HR-pQCT scans of the distal radius and tibia were performed at baseline and Month-12 (M12). Trabecular compartment was subjected to Individual Trabecula Segmentation while finite element analysis was performed to estimate stiffness and strength. Percent change from baseline at M12 of each parameter was compared between patient groups.

RESULTS

At the distal tibia, in the placebo group, plate surface area (pTb.S, -1.3%) decreased while rod bone volume fraction (rBV/TV, +4.5%) and number (rTb.N, +2.1%) increased. These changes were prevented by denosumab but persisted despite alendronate therapy (pTb.S: -1.7%; rBV/TV: +6.9%; rTb.N: +3.0%). Both treatments improved whole bone stiffness (D: +3.1%; A: +1.8%) and failure load (D: +3.0%; A: +2.2%); improvements using denosumab was significant compared to placebo (stiffness: p = 0.004; failure load: p = 0.003). At the distal radius, denosumab increased total trabecular bone volume fraction (BV/TV, +3.4%) and whole bone failure load (+4.0%), significantly different from placebo (BV/TV: p = 0.044; failure load: p = 0.046). Significantly different effects of either drug on plate and rod microstructure were not detected.

CONCLUSIONS

Denosumab preserved trabecular plate microstructure. Alendronate did not. However, estimated strength did not differ between denosumab and alendronate treated groups.

Differences in bone mineral density and morphometry measurements by fixed versus relative offset methods in high-resolution peripheral quantitative computed tomography

INTRODUCTION

High-resolution peripheral quantitative computed tomography (HR-pQCT), which enables in vivo analysis of bone morphometry, is widely used in osteoporosis research. The scan position is usually determined by the fixed offset method; however, there are concerns that the scan position can become relatively proximal if limb length is short. The present study compared bone mineral density and morphometry measured using the fixed and relative offset methods, in which the scan position is determined based on the lengths of the forearm and lower leg, and investigated factors responsible for measurement differences between the two methods.

METHODS

A total of 150 healthy Japanese subjects, comprising 75 men and 75 women, with a mean age of 45.1 years, were enrolled in this study. The distal radius and tibia were scanned using the fixed and relative offset methods; the fixed offset method involved scanning the radius and tibia at 9 mm and 22 mm, respectively, proximal to their distal articular surfaces. By contrast, the relative offset method entailed scanning the radius at 4% of the forearm length and the tibia at 7.3% of the lower leg length, proximal to their respective distal articular surfaces. The percent overlap between the scan positions of the two methods was measured using the scout views. Measurement values obtained with the two methods were compared. The correlation between the differences in the values among the two methods and forearm length, lower leg length, and body height was examined.

RESULTS

The subjects had a mean height of 164.3 ± 14.3 cm, mean forearm length of 252.9 ± 17.3 mm, and mean lower leg length of 346.7 ± 22.3 mm. The mean percent overlap was 85.0 ± 9.1% (59.2-99.6%) for the radius and 79.8 ± 12.5% (48.3-99.8%) for the tibia. Fixed offset scanning yielded higher total volumetric bone mineral density (Tt.vBMD) and cortical vBMD (Ct.vBMD) and greater cortical thickness (Ct.Th) (all p < 0.001). The differences between the two methods in terms of Tt.vBMD, Ct.vBMD and Ct.Th were significantly greater with shorter forearm length, lower leg length, and body height (radius: 0.51 < |r| < 0.63, tibia: 0.61 < |r| < 0.95).

CONCLUSION

Measurements of bone mineral density and morphometry obtained using the fixed offset method differed from those obtained using the relative offset method, which takes body size into account. Shorter body height, forearm length, and lower leg length were found to correlate with greater measurement differences. In populations with smaller stature, use of the fixed offset method results in relatively proximal images; thus, caution should be exercised when comparing groups of different height.

Effect of Testosterone Treatment on Bone Microarchitecture and Bone Mineral Density in Men: A 2-Year RCT

CONTEXT

Testosterone treatment increases bone mineral density (BMD) in hypogonadal men. Effects on bone microarchitecture, a determinant of fracture risk, are unknown.

OBJECTIVE

We aimed to determine the effect of testosterone treatment on bone microarchitecture using high resolution-peripheral quantitative computed tomography (HR-pQCT).

METHODS

Men ≥ 50 years of age were recruited from 6 Australian centers and were randomized to receive injectable testosterone undecanoate or placebo over 2 years on the background of a community-based lifestyle program. The primary endpoint was cortical volumetric BMD (vBMD) at the distal tibia, measured using HR-pQCT in 177 men (1 center). Secondary endpoints included other HR-pQCT parameters and bone remodeling markers. Areal BMD (aBMD) was measured by dual-energy x-ray absorptiometry (DXA) in 601 men (5 centers). Using a linear mixed model for repeated measures, the mean adjusted differences (95% CI) at 12 and 24 months between groups are reported as treatment effect.

RESULTS

Over 24 months, testosterone treatment, versus placebo, increased tibial cortical vBMD, 9.33 mg hydroxyapatite (HA)/cm3) (3.96, 14.71), P < 0.001 or 3.1% (1.2, 5.0); radial cortical vBMD, 8.96 mg HA/cm3 (3.30, 14.62), P = 0.005 or 2.9% (1.0, 4.9); total tibial vBMD, 4.16 mg HA/cm3 (2.14, 6.19), P < 0.001 or 1.3% (0.6, 1.9); and total radial vBMD, 4.42 mg HA/cm3 (1.67, 7.16), P = 0.002 or 1.8% (0.4, 2.0). Testosterone also significantly increased cortical area and thickness at both sites. Effects on trabecular architecture were minor. Testosterone reduced bone remodeling markers CTX, -48.1 ng/L [-81.1, -15.1], P < 0.001 and P1NP, -6.8 μg/L[-10.9, -2.7], P < 0.001. Testosterone significantly increased aBMD at the lumbar spine, 0.04 g/cm2 (0.03, 0.05), P < 0.001 and the total hip, 0.01 g/cm2 (0.01, 0.02), P < 0.001.

CONCLUSION

In men ≥ 50 years of age, testosterone treatment for 2 years increased volumetric bone density, predominantly via effects on cortical bone. Implications for fracture risk reduction require further study.

Multisite longitudinal calibration of HR-pQCT scanners and precision in osteogenesis imperfecta

BACKGROUND

For high-resolution peripheral quantitative computed tomography (HR-pQCT) to be used in longitudinal multi-center studies to assess disease and treatment effects, data must be aggregated across multiple timepoints and scanners. This requires an understanding of the factors contributing to scanner precision, and multi-scanner cross-calibration procedures, especially for clinical populations with severe phenotypes, like osteogenesis imperfecta (OI).

METHODS

To address this, we first evaluated single- and multi-center short- and long-term precision errors of standard HR-pQCT parameters. Two imaging phantoms were circulated among 13 sites (7 XtremeCT and 6 XtremeCT2) and scanned in triplicate at 3 timepoints/site. Additionally, duplicate in vivo radial and tibial scans were acquired in 29 individuals with OI. Secondly, we investigated subject- and scanner-related factors that contribute to precision errors using regression analysis. Thirdly, we proposed a reference site selection criterion for multisite cross-calibration and demonstrated the external validity of phantom-based calibrations.

RESULTS

Our results show excellent short-term single-site precision in both phantoms (CV % < 0.5%) and in density, microarchitecture and finite element parameters of OI participants (CV % = 0.75 to 1.2%). In vivo reproducibility significantly improved with (i) cross sectional area image registration versus no registration and (ii) scans with no motion artifacts. While reproducibility was similar across OI subtypes and anatomical sites, XtremeCT2 scanners achieved ~2.5% better precision than XtremeCT for trabecular parameters. Finally, we demonstrate that multisite longitudinal precision errors resulting from inconsistencies between scanners can be partially corrected through scanner cross-calibration.

CONCLUSIONS

This study is the first to assess long-term reproducibility and cross-calibration in a study using first and second generation HR-pQCT scanners. The results presented in this context provide timely guidelines for future use of this powerful clinical imaging modality in multi-center longitudinal clinical trials.

Dominant and nondominant distal radius microstructure: Predictors of asymmetry and effects of a unilateral mechanical loading intervention

Most information about distal radius microstructure is based on the non-dominant forearm, with little known about the factors that contribute to bilateral asymmetries in the general population, or what factors may influence bilateral changes over time. Here, we analyzed bilateral high resolution peripheral quantitative computed tomography (HRpQCT) data collected over a 12-month period as part of a clinical trial that prescribed a well-controlled, compressive loading task to the nondominant forearm. Baseline data from 102 women age 21–40, and longitudinal data from 66 women who completed the 12-month trial, were examined to determine factors responsible for side-to-side asymmetries in bone structure and change in structure over time. Cross-sectionally, the dominant radius had 2.4%–2.7% larger cross-sectional area, trabecular area, and bone mineral content than the nondominant radius, but no other differences were noted. Those who more strongly favored their dominant arm had significantly more, thinner, closely spaced trabecular struts in their dominant versus nondominant radius. Individuals assigned to a loading intervention had significant bilateral gains in total bone mineral density (2.0% and 1.2% in the nondominant versus dominant sides), and unilateral gains in the nondominant (loaded) cortical area (3.1%), thickness (3.0%), bone mineral density (1.7%) and inner trabecular density (1.3%). Each of these gains were significantly predicted by loading dose, a metric that included bone strain, number of cycles, and strain rate. Within individuals, change was negatively associated with age, meaning that women closer to age 40 experienced less of a gain in bone versus those closer to age 21. We believe that dominant/nondominant asymmetries in bone structure reflect differences in habitual loads during growth and past ability to adapt, while response to loading reflects current individual physiologic capacity to adapt.

•

We examined relationships between physical activity, handedness, demographics, and asymmetries in distal radius structure.

•

Trabecular and cross-sectional area were 2.4-2.7% larger in the dominant side.

•

We examined factors that predicted 12-month change after a unilateral loading intervention on the nondominant side.

•

The intervention caused unilateral (nondominant) increases in most variables, which scaled with loading dose.

•

The results also suggest that greater dietary calcium is associated with endosteal bone apposition following loading.

Heterogeneity in microstructural deterioration following spinal cord injury

BACKGROUND

Modelling and remodelling adapt bone morphology to accommodate strains commonly encountered during loading. If strains exceed a threshold threatening fracture, modelling-based bone formation increases bone volume reducing these strains. If unloading reduces strains below a threshold that inhibits resorption, increased remodelling-based bone resorption reduces bone volume restoring strains, but at the price of compromised bone volume and microstructure. As weight-bearing regions are adapted to greater strains, we hypothesized that microstructural deterioration will be more severe than at regions commonly adapted to low strains following spinal cord injury.

METHODS

We quantified distal tibial, fibula and radius volumetric bone mineral density (vBMD) using high-resolution peripheral quantitative computed tomography in 31 men, mean age 43.5 years (range 23.5-75.0), 12 with tetraplegia and 19 with paraplegia of 0.7 to 18.6 years duration, and 102 healthy age- and sex-matched controls. Differences in morphology relative to controls were expressed as standardized deviation (SD) scores (mean ± SD). Standardized between-region differences in vBMD were expressed as SDs (95% confidence intervals, CI).

RESULTS

Relative to controls, men with tetraplegia had deficits in total vBMD of -1.72 ± 1.38 SD at the distal tibia (p < 0.001) and - 0.68 ± 0.69 SD at distal fibula (p = 0.041), but not at the distal radius, despite paralysis. Deficits in men with paraplegia were -2.14 ± 1.50 SD (p < 0.001) at the distal tibia and -0.83 ± 0.98 SD (p = 0.005) at the distal fibula while distal radial total vBMD was 0.23 ± 1.02 (p = 0.371), not significantly increased, despite upper limb mobility. Comparing regions, in men with tetraplegia, distal tibial total vBMD was 1.04 SD (95%CI 0.07, 2.01) lower than at the distal fibula (p = 0.037) and 1.51 SD (95%CI 0.45, 2.57) lower than at the distal radius (p = 0.007); the latter two sites did not differ from each other. Results were similar in men with paraplegia, but total vBMD at the distal fibula was 1.06 SD (95%CI 0.35, 1.77) lower than at the distal radius (p = 0.004).

CONCLUSION

Microarchitectural deterioration following spinal cord injury is heterogeneous, perhaps partly because strain thresholds regulating the cellular activity of mechano-transduction are region specific.

Guidelines for the assessment of bone density and microarchitecture in vivo using high-resolution peripheral quantitative computed tomography

INTRODUCTION

The application of high-resolution peripheral quantitative computed tomography (HR-pQCT) to assess bone microarchitecture has grown rapidly since its introduction in 2005. As the use of HR-pQCT for clinical research continues to grow, there is an urgent need to form a consensus on imaging and analysis methodologies so that studies can be appropriately compared. In addition, with the recent introduction of the second-generation HrpQCT, which differs from the first-generation HR-pQCT in scan region, resolution, and morphological measurement techniques, there is a need for guidelines on appropriate reporting of results and considerations as the field adopts newer systems.

METHODS

A joint working group between the International Osteoporosis Foundation, American Society of Bone and Mineral Research, and European Calcified Tissue Society convened in person and by teleconference over several years to produce the guidelines and recommendations presented in this document.

RESULTS

An overview and discussion is provided for (1) standardized protocol for imaging distal radius and tibia sites using HR-pQCT, with the importance of quality control and operator training discussed; (2) standardized terminology and recommendations on reporting results; (3) factors influencing accuracy and precision error, with considerations for longitudinal and multi-center study designs; and finally (4) comparison between scanner generations and other high-resolution CT systems.

CONCLUSION

This article addresses the need for standardization of HR-pQCT imaging techniques and terminology, provides guidance on interpretation and reporting of results, and discusses unresolved issues in the field.

Deterioration of Cortical and Trabecular Microstructure Identifies Women With Osteopenia or Normal Bone Mineral Density at Imminent and Long-Term Risk for Fragility Fracture: A Prospective Study

More than 70% of women sustaining fractures have osteopenia or "normal" bone mineral density (BMD). These women remain undetected using the BMD threshold of -2.5 SD for osteoporosis. As microstructural deterioration increases bone fragility disproportionate to the bone loss producing osteopenia/normal BMD, we hypothesized that the structural fragility score (SFS) of ≥70 units, a measure capturing severe cortical and trabecular deterioration, will identify these women. Distal radial images were acquired using high-resolution peripheral quantitative tomography in postmenopausal French women, mean age 67 years (range 42-96 years); 1539 women were followed for 4 years (QUALYOR) and 561 women followed for 8 years (OFELY). Women with osteopenia or normal BMD accounted for ~80% of fractures. Women ≥70 years, 29.2% of the cohort, accounted for 39.2% to 61.5% of fractures depending on follow-up duration. Women having fractures had a higher SFS, lower BMD, and a higher fracture risk assessment score (FRAX) than women remaining fracture-free. In each BMD category (osteoporosis, osteopenia, normal BMD), fracture incidence was two to three times higher in women with SFS ≥70 than <70. In multivariable analyses, associations with fractures remained for BMD and SFS, not FRAX. BMD was no longer, or weakly, associated with fractures after accounting for SFS, whereas SFS remained associated with fracture after accounting for BMD. SFS detected two-to threefold more women having fractures than BMD or FRAX. SFS in women with osteopenia/normal BMD conferred an odds ratio for fracture of 2.69 to 5.19 for women of any age and 4.98 to 12.2 for women ≥70 years. Receiver-operator curve (ROC) analyses showed a significant area under the curve (AUC) for SFS, but not BMD or FRAX for the women ≥70 years of age. Targeting women aged ≥70 years with osteopenia indicated that treating 25% using SFS to allocate treatment conferred a cost-effectiveness ratio < USD $21,000/QALY saved. Quantifying microstructural deterioration complements BMD by identifying women without osteoporosis at imminent and longer-term fracture risk. © 2019 American Society for Bone and Mineral Research.

Impaired geometry, volumetric density, and microstructure of cortical and trabecular bone assessed by HR-pQCT in both sporadic and MEN1-related primary hyperparathyroidism

This study evaluated bone features of PHPT using HR-pQCT. The results showed both cortical and trabecular bones were significantly impaired in PHPT patients. Male and female PHPT patients suffered similar damages in bone. HR-pQCT indices were not observed to differ in MEN1 and sporadic PHPT patients.

INTRODUCTION

High-resolution peripheral quantitative CT is a novel imaging technique used to separately assess trabecular and cortical bone status of the radius and tibia in vivo. Using HR-pQCT, we aimed to evaluate bone features of primary hyperparathyroidism patients in a Chinese population and reveal similarities and differences in bone features in multiple endocrine neoplasia type 1-related PHPT and sporadic PHPT patients in the Chinese population.

METHODS

A case-control study was designed. In 58 PHPT patients and 58 sex- and age-matched healthy controls, the distal radius and tibia were scanned using HR-pQCT. Areal bone mineral density (aBMD) was also determined in PHPT patients using dual-energy X-ray absorptiometry (DXA).

RESULTS

In comparison with controls, PHPT patients were observed to exhibit reduced volumetric BMD at the cortical and trabecular compartments, thinner cortices, and more widely spaced trabeculae. Significant differences were still observed when comparing data of female and male patients with age-matched controls separately. MHPT patients (n = 11) were found to have lower aBMD Z-scores in the lumbar spine, trochanteric region, and total hip compared with sporadic PHPT patients (n = 47), while no differences were observed in HR-pQCT indices between the two groups. In multiple linear regression models, no significant correlations were identified between PTH and HR-pQCT indices. However, height was found to positively correlate with HR-pQCT-derived trabecular indices at both the radius and tibia.

CONCLUSIONS

PHPT affects geometry, volumetric density, and microstructure in both the cortical and trabecular bones in both male and female Chinese patients. MHPT patients were observed to have reduced aBMD as determined by DXA in the lumbar spine and hip in comparison with sporadic PHPT patients. However, HR-pQCT indices were not observed to differ.

Dimorphism in axial and appendicular dimensions, cortical and trabecular microstructure and matrix mineral density in Chinese and Caucasian women

INTRODUCTION

Appendicular fractures are less common in Chinese than Caucasian women. Bone mineral density (BMD) is lower, not higher than in Caucasians because Chinese have smaller appendicular dimensions than Caucasians. However, smaller bones may offset the liability to fracture by being assembled with a more robust microstructure. We hypothesized that Chinese assemble an appendicular skeleton with a thicker, less porous and more mineralized cortex that is less deteriorated in advanced age than in Caucasians.

METHODS

We compared anthropometry in 477 Chinese and 278 Caucasian women and compared bone microstructure using high-resolution peripheral quantitative computed tomography in another cohort of 186 Chinese and 381 Caucasian women aged 18 to 86 years, all living in Melbourne, Australia. Trabecular plate (p) and rod (r) bone volume/total volume (BV/TV) were quantified using individual trabecula segmentation (ITS). Bone strength was estimated using micro-finite element analysis (μFEA).

RESULTS

Premenopausal Chinese were shorter than Caucasian women, mainly due to shorter leg length. Distal radial total cross sectional area (CSA) was 14.8% smaller (p < 0.001). After adjusting for age and total CSA, Chinese had similar cortical and medullary areas but 0.30 SD lower cortical porosity and 0.27 SD higher matrix mineral density (both p < 0.05). Trabecular plate-to-rod ratio was 0.55 SD higher due to a 0.41 SD higher pBV/TV and 0.36 SD lower rBV/TV (p ranging 0.001 to 0.023). Chinese also had 0.36 SD greater whole bone stiffness and 0.36 SD greater failure load than Caucasians (both p < 0.05). After adjusting for age and total CSA, postmenopausal Chinese had 3.3% smaller cortical area, medullary area was 2.1% larger, cortical porosity was no lower, matrix mineral density and pBV/TV were no higher compared with Caucasians at the distal radius. Whole bone stiffness was 0.39 SD lower and failure load was 0.40 SD lower in Chinese (both p < 0.05).

CONCLUSION

Chinese build a more robust skeleton than Caucasians during growth, an advantage not observed in advanced age due to greater bone loss or race-specific secular trends in bone morphology.

Chinese Women in Both the United States and Hong Kong Have Cortical Microstructural Advantages and More Trabecular Plates Compared With White Women

We cross-sectionally compared racial differences in bone quality between Chinese women in the United States (US) and Hong Kong (HK) with white women. A total of 514 women were included. We measured bone geometry, mass, microstructure, and stiffness by high-resolution peripheral quantitative computed tomography (HR-pQCT), individual trabecula segmentation (ITS), and microfinite element analysis (μFEA). After adjustment for age and body mass index (BMI), premenopausal Chinese women in the US and HK had smaller bone area but greater radial cortical (Ct.) thickness and Ct. and trabecular (Tb.) volumetric bone mineral density (vBMD) versus white women but did not differ from each other. At the radius, Tb. number was lower and spacing greater in Chinese women from HK and the US versus white women, whereas Chinese women did not differ from each other. Tb. thickness was highest in Chinese women from HK, intermediate in Chinese-Americans, and lowest in white women. Chinese women had more trabecular plates versus white women, leading to greater age- and BMI-adjusted stiffness for premenopausal Chinese women in HK and the US (both p < 0.05) versus white women. Tibial differences were similar in premenopausal women; analogous trends in microstructure were present in postmenopausal women at the tibia, although stiffness did not differ. In contrast, at the radius, cortical, plate-to-rod ratio, and stiffness were similar between postmenopausal HK and white women. Adjusting for age, weight, and height rather than age and BMI tended to reduce differences in bone size and Tb. parameters but accentuate cortical differences such that Chinese premenopausal women in both locations and postmenopausal women from HK had higher stiffness at both skeletal sites compared with white women. Compared with white women, Chinese women in the US and HK have vBMD and microstructural advantages leading to higher or similar mechanical competence in pre- and postmenopausal women, respectively, despite smaller bone size.

Sexual Dimorphism in Cortical and Trabecular Bone Microstructure Appears During Puberty in Chinese Children

Distal forearm fractures during growth are more common in males than females. Because metaphyseal cortical bone is formed by coalescence of trabeculae emerging from the periphery of the growth plate, we hypothesized that the later onset of puberty in males produces a longer delay in trabecular bone formation and coalescence, which leaves a transient phase of high cortical porosity, low matrix mineral density, and high trabecular density relative to females. We quantified the nondominant distal radial microstructure using high-resolution peripheral quantitative computed tomography in 214 healthy Chinese boys and 219 Chinese girls aged between 7 and 17 years living in Hong Kong. Measurements of 110 slices (9.02 mm) were acquired 5 mm proximal to the growth plate of the nondominant distal radius. Porosity was measured using StrAx1.0 (Straxcorp, Melbourne, VIC, Australia) and trabecular plate and rod structure were measured using individual trabecula segmentation (ITS). Mechanical properties were estimated using finite element analysis (FEA). Results were adjusted for age, total bone cross-sectional area (CSA), dietary calcium intake, and physical activity. In boys, total bone CSA was 17.2% to 22.9% larger throughout puberty, cortical/total bone CSA was 5.1% smaller in Tanner stage 2 only, cortical porosity was 9.4% to 17.5% higher, and matrix mineral density was 1.0% to 2.5% lower in Tanner stage 2 to 5, than girls. Boys had higher trabecular rod BV/TV in Tanner stage 3 and 4, but higher trabecular plate BV/TV and plate to rod ratio in Tanner stage 5, than girls. Boys had 17.0% lower apparent modulus than girls in Tanner stage 2. A transient phase of higher porosity due to dissociation between bone mineral accrual and linear growth may contribute to higher distal radial bone fragility in Chinese boys compared to girls. © 2018 American Society for Bone and Mineral Research.

Increased Cortical Porosity and Reduced Trabecular Density Are Not Necessarily Synonymous With Bone Loss and Microstructural Deterioration

Absolute values of cortical porosity and trabecular density are used to estimate fracture risk, but these values are the net result of their growth-related assembly and age-related deterioration. Because bone loss affects both cortical and trabecular bone, we hypothesized that a surrogate measure of bone fragility should capture the age-related deterioration of both traits, and should do so independently of their peak values. Accordingly, we developed a structural fragility score (SFS), which quantifies the increment in distal radial cortical porosity and decrement in trabecular density relative to their premenopausal mean values in 99 postmenopausal women with forearm fractures and 105 controls using HR-pQCT. We expressed the results as odds ratios (ORs; 95% CI). Cortical porosity was associated with fractures in the presence of deteriorated trabecular density (OR 2.30; 95% CI, 1.30 to 4.05; p = 0.004), but not if trabecular deterioration was absent (OR 0.96; 95% CI, 0.50 to 1.86; p = 0.91). Likewise, trabecular density was associated with fractures in the presence of high cortical porosity (OR 3.35; 95% CI, 1.85 to 6.07; p < 0.0001), but not in its absence (OR 1.60; 95% CI, 0.78 to 3.28; p = 0.20). The SFS, which captures coexisting cortical and trabecular deterioration, was associated with fractures (OR 4.52; 95% CI, 2.17 to 9.45; p < 0.0001). BMD was associated with fracture before accounting for the SFS (OR 5.79; 95% CI, 1.24 to 27.1; p = 0.026), not after (OR 4.38; 95% CI, 0.48 to 39.9; p = 0.19). The SFS was associated with fracture before (OR 4.67; 95% CI, 2.21 to 9.88) and after (OR 3.94; 95% CI, 1.80 to 8.6) accounting for BMD (both ps < 0.0001). The disease of bone fragility is captured by cortical and trabecular deterioration: A measurement of coexisting cortical and trabecular deterioration is likely to identify women at risk for fracture more robustly than absolute values of cortical porosity, trabecular density, or BMD. © 2018 The Authors. JBMR Plus Published by Wiley Periodicals, Inc. on behalf of the American Society for Bone and Mineral Research.

The Influence of Cortical Porosity on the Strength of Bone During Growth and Advancing Age

PURPOSE OF REVIEW

Bone densitometry provides a two-dimensional projected areal apparent bone mineral density that fails to capture the heterogeneity of bone's material composition and macro-, micro-, and nano-structures critical to its material and structural strength. Assessment of the structural basis of bone fragility has focused largely on trabecular bone based on the common occurrence of fragility fractures at sites with substantial amounts of trabecular bone. This review focuses on the contribution of cortical bone to bone fragility throughout life.

RECENT FINDINGS

Accurately differentiating cortical and trabecular bone loss has important implications in quantifying bone fragility as these compartments have differing effects on bone strength. Recent advances in imaging methodology have improved distinction of these two compartments by (i) recognition of a cortico-trabecular transitional zone and (ii) quantifying bone microstructure in a region of interest that is a percentage of bone length rather than a fixed point. Additionally, non-invasive three-dimensional imaging methods allow more accurate quantification of changes in the cortical, trabecular, and cortico-trabecular compartments during growth, aging, disease, and treatment. Over 75% of the skeleton is assembled as cortical bone. Of all fragility fractures, ~ 80% are appendicular and involve regions rich in cortical bone and ~ 70% of all age-related appendicular bone loss is cortical and is mainly due to unbalanced intracortical remodeling which increases cortical porosity. The failure to achieve the optimal peak bone microstructure during growth due to disease and the deterioration in cortical and trabecular bone produced by bone loss compromise bone strength. The loss of strength produced by microstructural deterioration is disproportionate to the bone loss producing this deterioration. The reason for this is that the loss of strength increases as a 7th power function of the rise in cortical porosity and a 3rd power function of the fall in trabecular density (Schaffler and Burr in J Biomech. 21(1):13-6, 1988), hence the need to quantify bone microstructure.

Distal radius microstructure and finite element bone strain are related to site-specific mechanical loading and areal bone mineral density in premenopausal women

While weight-bearing and resistive exercise modestly increases aBMD, the precise relationship between physical activity and bone microstructure, and strain in humans is not known. Previously, we established a voluntary upper-extremity loading model that assigns a person's target force based on their subject-specific, continuum FE-estimated radius bone strain. Here, our purpose was to quantify the inter-individual variability in radius microstructure and FE-estimated strain explained by site-specific mechanical loading history, and to determine whether variability in strain is captured by aBMD, a clinically relevant measure of bone density and fracture risk. Seventy-two women aged 21–40 were included in this cross-sectional analysis. High resolution peripheral quantitative computed tomography (HRpQCT) was used to measure macro- and micro-structure in the distal radius. Mean energy equivalent strain in the distal radius was calculated from continuum finite element models generated from clinical resolution CT images of the forearm. Areal BMD was used in a nonlinear regression model to predict FE strain. Hierarchical linear regression models were used to assess the predictive capability of intrinsic (age, height) and modifiable (body mass, grip strength, physical activity) predictors. Fifty-one percent of the variability in FE bone strain was explained by its relationship with aBMD, with higher density predicting lower strains. Age and height explained up to 31.6% of the variance in microstructural parameters. Body mass explained 9.1% and 10.0% of the variance in aBMD and bone strain, respectively, with higher body mass indicative of greater density. Overall, results suggest that meaningful differences in bone structure and strain can be predicted by subject characteristics.

•

Areal bone mineral density (aBMD) explains 51% of the variability in bone strain.

•

Adult bone loading predicts greater cortical porosity and trabecular density.

•

Greater body mass predicts greater aBMD and lower bone strain.