Diffusion and partitioning of fluorescent lipid probes in phospholipid monolayers

Phase behavior and miscibility in lipid monolayers containing glycolipids

HYPOTHESIS

Glycolipids in biological membranes are ubiquitous and believed to be involved in the formation of ordered functional domains. However, our current knowledge about such glycolipid-enriched domains is limited because they are inherently difficult to characterize.

EXPERIMENTS

We use grazing-incidence X-ray diffraction, isotherm measurements, and Brewster angle microscopy to investigate the phase behavior and miscibility in Langmuir lipid monolayers containing glycolipids.

FINDINGS

Glycolipid-enriched domains give rise to distinct diffraction patterns that allow for a systematic structural investigation and reveal a rich phenomenology, ranging from near-complete demixing to the formation of mixed domains with unique features. The phase behavior is governed by the headgroup chemistry and by the length and saturation of the tails.

Measuring protein insertion areas in lipid monolayers by fluorescence correlation spectroscopy

Membrane insertion of protein domains is an important step in many membrane remodeling processes, for example, in vesicular transport. The membrane area taken up by the protein insertion influences the protein binding affinity as well as the mechanical stress induced in the membrane and thereby its curvature. To our knowledge, this is the first optical measurement of this quantity on a system in equilibrium with direct determination of the number of inserted protein and no further assumptions concerning the binding thermodynamics. Whereas macroscopic total area changes in lipid monolayers are typically measured on a Langmuir film balance, finding the number of inserted proteins without perturbing the system and quantitating any small area changes has posed a challenge. Here, we address both issues by performing two-color fluorescence correlation spectroscopy directly on the monolayer. With a fraction of the protein being fluorescently labeled, the number of inserted proteins is determined in situ without resorting to invasive techniques such as collecting the monolayer by aspiration. The second color channel is exploited to monitor a small fraction of labeled lipids to determine the total area increase. Here, we use this method to determine the insertion area per molecule of Sar1, a protein of the COPII complex, which is involved in transport vesicle formation. Sar1 has an N-terminal amphipathic helix, which is responsible for membrane binding and curvature generation. An insertion area of (3.4 ± 0.8) nm² was obtained for Sar1 in monolayers from a lipid mixture typically used in COPII reconstitution experiments, in good agreement with the expected insertion area of the Sar1 amphipathic helix. By using the two-color approach, determining insertion areas relies only on local fluorescence measurements. No macroscopic area measurements are needed, giving the method the potential to also be applied to laterally heterogeneous monolayers and bilayers.

Melting transitions in biomembranes

We investigated melting transitions in native biological membranes containing their membrane proteins. The membranes originated from E. coli, B. subtilis, lung surfactant and nerve tissue from the spinal cord of several mammals. For some preparations, we studied the pressure, pH and ionic strength dependence of the transition. For porcine spine, we compared the transition of the native membrane to that of the extracted lipids. All preparations displayed melting transitions of 10-20° below physiological or growth temperature, independent of the organism of origin and the respective cell type. We found that the position of the transitions in E. coli membranes depends on the growth temperature. We discuss these findings in the context of the thermodynamic theory of membrane fluctuations close to transition that predicts largely altered elastic constants, an increase in fluctuation lifetime and in membrane permeability. We also discuss how to distinguish lipid melting from protein unfolding transitions. Since the feature of a transition slightly below physiological temperature is conserved even when growth conditions change, we conclude that the transitions are likely to be of major biological importance for the survival and the function of the cell.

Fluorescence Correlation Spectroscopy to Examine Protein-Lipid Interactions in Membranes

Fluorescence correlation spectroscopy (FCS) is a versatile technique to study membrane dynamics and protein-lipid interactions. It can provide information about diffusion coefficients, concentrations, and molecular interactions of proteins and lipids in the membrane. These parameters allow for the determination of protein partitioning into different lipid environments, the identification of lipid domains, and the detection of lipid-protein complexes on the membrane. During the last decades, FCS studies were successfully performed on model membrane systems as also on living cells, to characterize protein-lipid interactions. Recent developments of the method described here improved quantitative measurements on membranes and decreased the number of potential artifacts. The aim of this chapter is to provide the reader with the necessary information and some practical guidelines to perform FCS studies on artificial and cellular membranes.

Complex formation equilibria between cholesterol and diosgenin analogues in monolayers determined by the Langmuir method

The purpose of this study was to investigate the interaction between diosgenin analogues [DioA: diosgenin acetate (DAc) and (25R)-5α,6β-dihydroxyspirostan-3β-ol acetate (DSol)] and cholesterol (Ch) monolayers at the air/water interface. The surface tension of pure and mixed lipid monolayers at 22 °C was measured by using the Langmuir method with a Teflon trough and a Nima 9002 tensiometer. The surface tension values were used to calculate the π-A isotherms and to determine the molecular surface areas. The interactions between Ch and each DioA resulted in significant deviations from the additivity rule. The theory described in this work was used to determine the stability constants, the areas occupied by one molecule of Ch-DAc or Ch-DSol, and the complex formation energy (Gibbs free energy) values.

FCS Analysis of Protein Mobility on Lipid Monolayers

In vitro membrane model systems are used to dissect complex biological phenomena under controlled unadulterated conditions. In this context, lipid monolayers are a powerful tool to particularly study the influence of lipid packing on the behavior of membrane proteins. Here, monolayers deposited in miniaturized fixed area-chambers, which require only minute amounts of protein, were used and shown to faithfully reproduce the characteristics of Langmuir monolayers. This assay is ideally suited to be combined with single-molecule sensitive fluorescence correlation spectroscopy (FCS) to characterize diffusion dynamics. Our results confirm the influence of lipid packing on lipid mobility and validate the use of FCS as an alternative to conventional surface pressure measurements for characterizing the monolayer. Furthermore, we demonstrate the effect of lipid density on the diffusional behavior of membrane-bound components. We exploit the sensitivity of FCS to characterize protein interactions with the lipid monolayer in a regime in which the monolayer physical properties are not altered. To demonstrate the potential of our approach, we analyzed the diffusion behavior of objects of different nature, ranging from a small peptide to a large DNA-based nanostructure. Moreover, in this work we quantify the surface viscosity of lipid monolayers. We present a detailed strategy for the conduction of point FCS experiments on lipid monolayers, which is the first step toward extensive studies of protein-monolayer interactions.

Gradient-driven diffusion and pattern formation in crowded mixtures

Gradient-driven diffusion in crowded, multicomponent mixtures is a topic of high interest because of its role in biological processes such as transport in cell membranes. In partially phase-separated solutions, gradient-driven diffusion affects microstructure, which in turn affects diffusivity; a key question is how this complex coupling controls both transport and pattern formation. To examine these mechanisms, we study a two-dimensional multicomponent lattice gas model, where "tracer" molecules diffuse between a source and a sink separated by a solution of sticky "crowder" molecules that cluster to form dynamically evolving obstacles. In the high-temperature limit, crowders and tracers are miscible, and transport may be predicted analytically. At intermediate temperatures, crowders phase separate into clusters that drift toward the tracer sink. As a result, steady-state tracer diffusivity depends nonmonotonically on both temperature and crowder density, and we observe a variety of complex microstructures. In the low-temperature limit, crowders rapidly aggregate to form obstacles that are kinetically arrested; if crowder density is near the percolation threshold, resulting tracer diffusivity shows scaling behavior with the same scaling exponent as the random resistor network model. Though highly idealized, this simple model reveals fundamental mechanisms governing coupled gradient-driven diffusion, phase separation, and microstructural evolution in crowded mixtures.

Molecular-level insight into the binding of arginine to a zwitterionic Langmuir monolayer

Arginine molecules bind to a DPPC monolayer, altering the interfacial electrostatic potential and the lateral mobility of the lipids, while having little effect on the compression isotherm of the monolayer.

Protein Patterns and Oscillations on Lipid Monolayers and in Microdroplets

The Min proteins from E.coli position the bacterial cell-division machinery through pole-to-pole oscillations. In vitro, Min protein self-organization can be reconstituted in the presence of a lipid membrane as a catalytic surface. However, Min dynamics have so far not been reconstituted in fully membrane-enclosed volumes. Microdroplets interfaced by lipid monolayers were employed as a simple 3D mimic of cellular compartments to reconstitute Min protein oscillations. We demonstrate that lipid monolayers are sufficient to fulfil the catalytic role of the membrane and thus represent a facile platform to investigate Min protein regulated dynamics of the cell-division protein FtsZ-mts. In particular, we show that droplet containers reveal distinct Min oscillation modes, and reveal a dependence of FtsZ-mts structures on compartment size. Finally, co-reconstitution of Min proteins and FtsZ-mts in droplets yields antagonistic localization, thus demonstrating that droplets indeed support the analysis of complex bacterial self-organization in confined volumes.

Enabling Marangoni flow at air-liquid interfaces through deposition of aerosolized lipid dispersions

It has long been known that deposited drops of surfactant solution induce Marangoni flows at air-liquid interfaces. These surfactant drops create a surface tension gradient, which causes an outward flow at the fluid interface. We show that aqueous phospholipid dispersions may be used for this same purpose. In aqueous dispersions, phospholipids aggregate into vesicles that are not surface-active; therefore, drops of these dispersions do not initiate Marangoni flow. However, aerosolization of these dispersions disrupts the vesicles, allowing access to the surface-active monomers within. These lipid monomers do have the ability to induce Marangoni flow. We hypothesize that monomers released from broken vesicles adsorb on the surfaces of individual aerosol droplets and then create localized surface tension reduction upon droplet deposition. Deposition of lipid monomers via aerosolization produces surface tensions as low as 1mN/m on water. In addition, aerosolized lipid deposition also drives Marangoni flow on entangled polymer solution subphases with low initial surface tensions (∼34mN/m). The fact that aerosolization of phospholipids naturally found within pulmonary surfactant can drive Marangoni flows on low surface tension liquids suggests that aerosolized lipids may be used to promote uniform pulmonary drug delivery without the need for exogenous spreading agents.

Phospholipid lateral diffusion in phosphatidylcholine-sphingomyelin-cholesterol monolayers; effects of oxidatively truncated phosphatidylcholines

Oxidative stress is involved in a number of pathological conditions and the generated oxidatively modified lipids influence membrane properties and functions, including lipid-protein interactions and cellular signaling. Brewster angle microscopy demonstrated oxidatively truncated phosphatidylcholines to promote phase separation in monolayers of 1-palmitoyl-2-oleoyl-sn-glycerol-3-phosphocholine (POPC), sphingomyelin (SM) and cholesterol (Chol). More specifically, 1-palmitoyl-2-azelaoyl-sn-glycero-3-phosphocholine (PazePC), was found to increase the miscibility transition pressure of the SM/Chol-phase. Lateral diffusion of lipids is influenced by a variety of membrane properties, thus making it a sensitive parameter to observe the coexistence of different lipid phases, for instance. The dependence on lipid lateral packing of the lateral diffusion of fluorophore-containing phospholipid analogs was investigated in Langmuir monolayers composed of POPC, SM, and Chol and additionally containing oxidatively truncated phosphatidylcholines, using fluorescence correlation spectroscopy (FCS). To our knowledge, these are the first FCS results on miscibility transition in ternary lipid monolayers, confirming previous results obtained using Brewster angle microscopy on such lipid monolayers. Wide-field fluorescence microscopy was additionally employed to verify the transition, i.e. the loss and reformation of SM/Chol domains.

Probing the association of triblock copolymers with supported lipid membranes using microcantilevers

Pluronics are a class of amphiphilic triblock copolymers that are known to interact with cellular membranes in interesting ways. The solubility of these triblock copolymers in free lipid membranes can be altered with temperature, allowing the possibility of tuning their membrane insertion. However, for supported lipid membranes, the asymmetric local environment and the strong influence of the solid support can alter the solubility of these triblock copolymers in lipid membranes. Here, we probe the interactions of these copolymers with supported lipid membranes using microcantilevers and fluorescence recovery after photobleaching (FRAP) measurements. We measure the solubility and interactions of triblock copolymers (F68 and F98) in supported lipid bilayers as a function of temperature and the length of the copolymer lipophilic block. A Langmuir isotherm model and a free mean area theory are applied to describe the polymer-lipid interactions at the microcantilever surface, determine association constants, and analyze the effect of triblock copolymers on lateral lipid diffusion.

Membrane orientation and lateral diffusion of BODIPY-cholesterol as a function of probe structure

Cholesterol tagged with the BODIPY fluorophore via the central difluoroboron moiety of the dye (B-Chol) is a promising probe for studying intracellular cholesterol dynamics. We synthesized a new BODIPY-cholesterol probe (B-P-Chol) with the fluorophore attached via one of its pyrrole rings to carbon-24 of cholesterol (B-P-Chol). Using two-photon fluorescence polarimetry in giant unilamellar vesicles and in the plasma membrane (PM) of living intact and actin-disrupted cells, we show that the BODIPY-groups in B-Chol and B-P-Chol are oriented perpendicular and almost parallel to the bilayer normal, respectively. B-Chol is in all three membrane systems much stronger oriented than B-P-Chol. Interestingly, we found that the lateral diffusion in the PM was two times slower for B-Chol than for B-P-Chol, although we found no difference in lateral diffusion in model membranes. Stimulated emission depletion microscopy, performed for the first time, to our knowledge, with fluorescent sterols, revealed that the difference in lateral diffusion of the BODIPY-cholesterol probes was not caused by anomalous subdiffusion, because diffusion of both analogs in the PM was free but not hindered. Our combined measurements show that the position and orientation of the BODIPY moiety in cholesterol analogs have a severe influence on lateral diffusion specifically in the PM of living cells.

Measuring selective estrogen receptor modulator (SERM)-membrane interactions with second harmonic generation

The interaction of selective estrogen receptor modulators (SERMs) with lipid membranes has been measured at clinically relevant serum concentrations using the label-free technique of second harmonic generation (SHG). The SERMs investigated in this study include raloxifene, tamoxifen, and the tamoxifen metabolites 4-hydroxytamoxifen, N-desmethyltamoxifen, and endoxifen. Equilibrium association constants (Ka) were measured for SERMs using varying lipid compositions to examine how lipid phase, packing density, and cholesterol content impact SERM-membrane interactions. Membrane-binding properties of tamoxifen and its metabolites were compared on the basis of hydroxyl group substitution and amine ionization to elucidate how the degree of drug ionization impacts membrane partitioning. SERM-membrane interactions were probed under multiple pH conditions, and drug adsorption was observed to vary with the concentration of soluble neutral species. The agreement between Ka values derived from SHG measurements of the interactions between SERMs and artificial cell membranes and independent observations of the SERMs efficacy from clinical studies suggests that quantifying membrane adsorption properties may be important for understanding SERM action in vivo.

Validity and applicability of membrane model systems for studying interactions of peripheral membrane proteins with lipids

The cell membrane serves, at the same time, both as a barrier that segregates as well as a functional layer that facilitates selective communication. It is characterized as much by the complexity of its components as by the myriad of signaling process that it supports. And, herein lays the problems in its study and understanding of its behavior - it has a complex and dynamic nature that is further entangled by the fact that many events are both temporal and transient in their nature. Model membrane systems that bypass cellular complexity and compositional diversity have tremendously accelerated our understanding of the mechanisms and biological consequences of lipid-lipid and protein-lipid interactions. Concurrently, in some cases, the validity and applicability of model membrane systems are tarnished by inherent methodical limitations as well as undefined quality criteria. In this review we introduce membrane model systems widely used to study protein-lipid interactions in the context of key parameters of the membrane that govern lipid availability for peripheral membrane proteins. This article is part of a Special Issue entitled Tools to study lipid functions.

Determination of nanostructure of liposomes containing two model drugs by X-ray scattering from a synchrotron source

Small-angle X-ray scattering has been employed to study how the introduction of paracetamol and acetylsalicylic acid into a liposome bilayer system affects the system's nanostructure. An X-ray scattering model, developed for multilamellar liposome systems [Pabst et al. (2000), Phys. Rev. E, 62, 4000-4009], has been used to fit the experimental data and to extract information on how structural parameters, such as the number and thickness of the bilayers of the liposomes, thickness of the water layer in between the bilayers, size and volume of the head and tail groups, are affected by the drugs and their concentration. Even though the experimental data reveal a complicated picture of the drug-bilayer interaction, they clearly show a correlation between nanostructure, drug and concentration in some aspects. The localization of the drugs in the bilayers is discussed.

A monolayer assay tailored to investigate lipid-protein systems

Model membrane systems have become invaluable tools to investigate specific features of cellular membranes. Although a variety of different experimental assays does exist, many of them are rather complicated in their preparation and difficult in their practical realisation. Here, we propose a new simple miniaturised monolayer assay that can easily be combined with standard analytical techniques such as confocal fluorescence microscopy and fluorescence correlation spectroscopy (FCS).

Single molecule probes of membrane structure: orientation of BODIPY probes in DPPC as a function of probe structure

Single molecule fluorescence measurements have recently been used to probe the orientation of fluorescent lipid analogs doped into lipid films at trace levels. Using defocused polarized total internal reflection fluorescence microscopy (PTIRF-M), these studies have shown that fluorophore orientation responds to changes in membrane surface pressure and composition, providing a molecular level marker of membrane structure. Here we extend those studies by characterizing the single molecule orientations of six related BODIPY probes doped into monolayers of DPPC. Langmuir-Blodgett monolayers transferred at various surface pressures are used to compare the response from fluorescent lipid analogs in which the location of the BODIPY probe is varied along the length of the acyl chain. For each BODIPY probe location along the chain, comparisons are made between analogs containing phosphocholine and smaller fatty acid headgroups. Together these studies show a general propensity of the BODIPY analogs to insert into membranes with the BODIPY probe aligned along the acyl chains or looped back to interact with the headgroups. For all BODIPY probes studied, a bimodal orientation distribution is observed which is sensitive to surface pressure, with the population of BODIPY probes aligned along the acyl chains increasing with elevated surface pressure. Trends in the single molecule orientations for the six analogs reveal a configuration where optimal placement of the BODIPY probe within the acyl chain maximizes its sensitivity to the surrounding membrane structure. These results are discussed in terms of balancing the effects of headgroup association with acyl chain length in designing the optimal placement of the BODIPY probe.

Interface shear microrheometer with an optically driven oscillating probe particle

We report the first experimental demonstration of an active interfacial shear microrheometer (ISMR) that uses a particle trapped by oscillating optical tweezers (OT) to probe the shear modulus G(s)(*)(ω) of a gas/liquid interface. The most significant advantages of the oscillating OT in a rheology study are: (1) very high sensitivity compared to other active microrheology methods and (2) the ability to measure both the real and imaginary components of the complex shear modulus without relying on the use of Kramers-Kronig relation, which can be problematic at low frequencies for most of the passive methods. We demonstrate the utilities of our ISMR in two case studies: (1) a 1,2-dipalmitoyl-sn-glycero-3-phosphocholine monolayer and (2) a composite of poly(styrene sulfonate) and dioctadecyldimethylammonium at the air/water interface in regimes where no other active instruments can explore.

Atomistic simulation of lipid and DiI dynamics in membrane bilayers under tension

Membrane tension modulates cellular processes by initiating changes in the dynamics of its molecular constituents. To quantify the precise relationship between tension, structural properties of the membrane, and the dynamics of lipids and a lipophilic reporter dye, we performed atomistic molecular dynamics (MD) simulations of DiI-labeled dipalmitoylphosphatidylcholine (DPPC) lipid bilayers under physiological lateral tensions ranging from -2.6 mN m(-1) to 15.9 mN m(-1). Simulations showed that the bilayer thickness decreased linearly with tension consistent with volume-incompressibility, and this thinning was facilitated by a significant increase in acyl chain interdigitation at the bilayer midplane and spreading of the acyl chains. Tension caused a significant drop in the bilayer's peak electrostatic potential, which correlated with the strong reordering of water and lipid dipoles. For the low tension regime, the DPPC lateral diffusion coefficient increased with increasing tension in accordance with free-area theory. For larger tensions, free area theory broke down due to tension-induced changes in molecular shape and friction. Simulated DiI rotational and lateral diffusion coefficients were lower than those of DPPC but increased with tension in a manner similar to DPPC. Direct correlation of membrane order and viscosity near the DiI chromophore, which was just under the DPPC headgroup, indicated that measured DiI fluorescence lifetime, which is reported to decrease with decreasing lipid order, is likely to be a good reporter of tension-induced decreases in lipid headgroup viscosity. Together, these results offer new molecular-level insights into membrane tension-related mechanotransduction and into the utility of DiI in characterizing tension-induced changes in lipid packing.

Free volume theory applied to lateral diffusion in Langmuir monolayers: atomistic simulations for a protein-free model of lung surfactant

We hereby present a study on lateral diffusion of lipids in Langmuir monolayers. We apply atomistic molecular dynamics simulations to a model system whose composition is consistent with protein-free lung surfactant. Our main focus is on the assessment of the validity of the free volume theory for lateral diffusion and on the interpretation of the cross-sectional area and activation energy parameters appearing in the theory. We find that the diffusion results can be fitted to the description given by the free volume theory, but the interpretation of its parameters is not straightforward. While the cross-sectional area appears to be related to the hard-core cross-sectional area of a lipid, its role in the lateral diffusion process is unclear. Also, the activation energy derived using the free volume theory is different from the activation energy found through Arrhenius analysis, and its physical interpretation remains elusive. Finally, we find that lipid diffusion does not occur via rapid single-particle "jumps". Instead, lipids move in a concerted manner as loosely defined transient clusters, as observed earlier for lipid bilayers.

Influence of lipid heterogeneity and phase behavior on phospholipase A2 action at the single molecule level

We monitored the action of phospholipase A(2) (PLA(2)) on L- and D-dipalmitoyl-phosphatidylcholine (DPPC) Langmuir monolayers by mounting a Langmuir-trough on a wide-field fluorescence microscope with single molecule sensitivity. This made it possible to directly visualize the activity and diffusion behavior of single PLA(2) molecules in a heterogeneous lipid environment during active hydrolysis. The experiments showed that enzyme molecules adsorbed and interacted almost exclusively with the fluid region of the DPPC monolayers. Domains of gel state L-DPPC were degraded exclusively from the gel-fluid interface where the buildup of negatively charged hydrolysis products, fatty acid salts, led to changes in the mobility of PLA(2). The mobility of individual enzymes on the monolayers was characterized by single particle tracking. Diffusion coefficients of enzymes adsorbed to the fluid interface were between 3.2 microm(2)/s on the L-DPPC and 4.9 microm(2)/s on the D-DPPC monolayers. In regions enriched with hydrolysis products, the diffusion dropped to approximately 0.2 microm(2)/s. In addition, slower normal and anomalous diffusion modes were seen at the L-DPPC gel domain boundaries where hydrolysis took place. The average residence times of the enzyme in the fluid regions of the monolayer and on the product domain were between approximately 30 and 220 ms. At the gel domains it was below the experimental time resolution, i.e., enzymes were simply reflected from the gel domains back into solution.

Two-dimensional microfluidics using circuits of wettability contrast

We originally introduce a device to achieve monitored flows of Langmuir monolayers on predesigned wet circuits imprinted on a solid support. The hydrophilic track is first engraved in contact with a hydrophobically coated metallic plate that is fitted into a three-compartment Langmuir trough. Two different designs are tested to confirm flow stability and control. In particular and as a first utility, we measure the diffusion coefficient of a fluorescent probe using Y-junction geometry.