Molecular dynamics simulations of DNA/PEI complexes: effect of PEI branching and protonation state

Peptide-based non-viral gene delivery: A comprehensive review of the advances and challenges

Gene therapy is the most effective treatment option for diseases, but its effectiveness is affected by the choice and design of gene carriers. The genes themselves have to pass through multiple barriers in order to enter the cell and therefore require additional vectors to carry them inside the cell. In gene therapy, peptides have unique properties and potential as gene carriers, which can effectively deliver genes into specific cells or tissues, protect genes from degradation, improve gene transfection efficiency, and enhance gene targeting and biological responsiveness. This paper reviews the research progress of peptides and their derivatives in the field of gene delivery recently, describes the obstacles encountered by foreign materials to enter the interior of the cell, and introduces the following classes of functional peptides that can carry materials into the interior of the cell, and assist in transmembrane translocation of carriers, thus breaking through endosomal traps to enable successful entry of genetic materials into the nucleus of the cell. The paper also discusses the combined application of peptide vectors with other vectors to enhance its transfection ability, explores current challenges encountered by peptide vectors, and looks forward to future developments in the field.

Carbon capture in polymer-based electrolytes

Nanoparticle organic hybrid materials (NOHMs) have been proposed as excellent electrolytes for combined CO2 capture and electrochemical conversion due to their conductive nature and chemical tunability. However, CO2 capture behavior and transport properties of these electrolytes after CO2 capture have not yet been studied. Here, we use a variety of nuclear magnetic resonance (NMR) techniques to explore the carbon speciation and transport properties of branched polyethylenimine (PEI) and PEI-grafted silica nanoparticles (denoted as NOHM-I-PEI) after CO2 capture. Quantitative 13C NMR spectra collected at variable temperatures reveal that absorbed CO2 exists as carbamates (RHNCOO- or RR'NCOO-) and carbonate/bicarbonate (CO32-/HCO3-). The transport properties of PEI and NOHM-I-PEI studied using 1H pulsed-field-gradient NMR, combined with molecular dynamics simulations, demonstrate that coulombic interactions between negatively and positively charged chains dominate in PEI, while the self-diffusion in NOHM-I-PEI is dominated by silica nanoparticles. These results provide strategies for selecting adsorbed forms of carbon for electrochemical reduction.

Predicting Ion Sequestration in Charged Polymers with the Steepest-Entropy-Ascent Quantum Thermodynamic Framework

The steepest-entropy-ascent quantum thermodynamic framework is used to investigate the effectiveness of multi-chain polyethyleneimine-methylenephosphonic acid in sequestering rare-earth ions (Eu3+) from aqueous solutions. The framework applies a thermodynamic equation of motion to a discrete energy eigenstructure to model the binding kinetics of europium ions to reactive sites of the polymer chains. The energy eigenstructure is generated using a non-Markovian Monte Carlo model that estimates energy level degeneracies. The equation of motion is used to determine the occupation probability of each energy level, describing the unique path through thermodynamic state space by which the polymer system sequesters rare-earth ions from solution. A second Monte Carlo simulation is conducted to relate the kinetic path in state space to physical descriptors associated with the polymer, including the radius of gyration, tortuosity, and Eu-neighbor distribution functions. These descriptors are used to visualize the evolution of the polymer during the sequestration process. The fraction of sequestered Eu3+ ions depends upon the total energy of the system, with lower energy resulting in greater sequestration. The kinetics of the overall sequestration are dependent on the steepest-entropy-ascent principle used by the equation of motion to generate a unique kinetic path from an initial non-equilibrium state.

Protonation-mediated DNA tile self-assembly with nuclease resistance characteristic for signal-amplified detection of microRNAs

DNA nanotechnology, developing rapidly in recent years, has unprecedented superiorities in biological application-oriented research including high programmability, convenient functionalization, reconfigurable structure, and intrinsic biocompatibility. However, the susceptibility to nucleases in the physiological environment has been an obstacle to applying DNA nanostructures in biological science research. In this study, a new DNA self-assembly strategy, mediated by double-protonated small molecules instead of classical metal ions, is developed to enhance the nuclease resistance of DNA nanostructures while retaining their integrality and functionality, and the relative application has been launched in the detection of microRNAs (miRNAs). Faced with low-abundance miRNAs, we integrate hybrid chain reaction (HCR) with DNA self-assembly in the presence of double-protonated small molecules to construct a chemiluminescence detection platform with nuclease resistance, which utilizes the significant difference of molecular weight between DNA arrays and false-positive products to effectively separate of reaction products and remove the detection background. This strategy attaches importance to the nucleic acid stability during the assay process via improving nuclease resistance while rendering the detection results for miRNAs more authentic and reliable, opening our eyes to more possibilities for the multiple applications of customized DNA nanostructures in biology, including bioassay, bioimaging, drug delivery, and cell modulation.

Potential of Modulating Aldosterone Signaling and Mineralocorticoid Receptor with microRNAs to Attenuate Diabetic Kidney Disease

Diabetic Kidney Disease (DKD) is a significant complication of diabetes and primary cause of end-stage renal disease globally. The exact mechanisms underlying DKD remain poorly understood, but multiple factors, including the renin-angiotensin-aldosterone system (RAAS), play a key role in its progression. Aldosterone, a mineralocorticoid steroid hormone, is one of the key components of RAAS and a potential mediator of renal damage and inflammation in DKD. miRNAs, small noncoding RNA molecules, have attracted interest due to their regulatory roles in numerous biological processes. These processes include aldosterone signaling and mineralocorticoid receptor (MR) expression. Numerous miRNAs have been recognized as crucial regulators of aldosterone signaling and MR expression. These miRNAs affect different aspects of the RAAS pathway and subsequent molecular processes, which impact sodium balance, ion transport, and fibrosis regulation. This review investigates the regulatory roles of particular miRNAs in modulating aldosterone signaling and MR activation, focusing on their impact on kidney injury, inflammation, and fibrosis. Understanding the complex interaction between miRNAs and the RAAS could lead to a new strategy to target aldosterone signaling and MR activation using miRNAs. This highlights the potential of miRNA-based interventions for DKD, with the aim of enhancing kidney outcomes in individuals with diabetes.

Reversible stabilization of DNA/PEI complexes by reducible click-linkage between DNA and polymer. A new polyplex concept for lowering polymer quantity

Nonviral transfection of mammalian cells can be performed with electrostatic complexes (polyplexes) between a plasmid DNA (pDNA) encoding a foreign gene and a cationic polymer. However, an excess of the cationic polymer is required for pDNA condensation and polyplexes formation, which generate in vivo toxicity. Here, we present a new concept of polyplexes preparation aiming to reduce the polymer quantity. pDNA was functionalized with 3,6,9-trioxaundecan-1- {4 - [(2-chloroethyl) ethylamino)] - benzylamino}, 11-azide, and polyethyleneimine (lPEI) with reducible dibenzocyclooctyl (SS-DBCO) groups allowing azide-alkyne cycloaddition between pDNA and lPEI after condensation. The size of polyplexes with DBCO-SS-lPEI was smaller than with lPEI due to a stronger DNA condensation thanks to linkages between polymer and pDNA preventing dissociation until disulfide bridges reduction. In vitro transfection showed that the amount of DBCO-SS-lPEI leading to the most efficient polyplexes was three times lower than lPEI. As expected, toxicity in mice was significantly reduced upon intravenous injection of DBCO-SS-lPEI polyplexes at doses where the lPEI polyplexes killed mice. This is probably due to the high stability of the DBCO-SS-lPEI polyplexes which prevented their aggregation in the pulmonary capillaries. Overall, this new concept of polyplexes with DBCO-SS-lPEI offering the possibility of administering higher doses of polyplexes than lPEI and their ability to pass the pulmonary barrier could be favorably exploited for transfection of distant organs or tissues, such as tumors.

Automated Parameterization of Coarse-Grained Polyethylenimine under a Martini Framework

As a versatile polymer in many applications, synthesized polyethylenimine (PEI) is polydisperse with diverse branched structures that attain pH-dependent protonation states. Understanding the structure-function relationship of PEI is necessary for enhancing its efficacy in various applications. Coarse-grained (CG) simulations can be performed at length and time scales directly comparable with experimental data while maintaining the molecular perspective. However, manually developing CG forcefields for complex PEI structures is time-consuming and prone to human errors. This article presents a fully automated algorithm that can coarse-grain any branched architecture of PEI from its all-atom (AA) simulation trajectories and topology. The algorithm is demonstrated by coarse-graining a branched 2 kDa PEI, which can replicate the AA diffusion coefficient, radius of gyration, and end-to-end distance of the longest linear chain. Commercially available 25 and 2 kDa Millipore-Sigma PEIs are used for experimental validation. Specifically, branched PEI architectures are proposed, coarse-grained using the automated algorithm, and then simulated at different mass concentrations. The CG PEIs can reproduce existing experimental data on PEI's diffusion coefficient and Stokes-Einstein radius at infinite dilution as well as its intrinsic viscosity. This suggests a strategy where probable chemical structures of synthetic PEIs can be inferred computationally using the developed algorithm. The coarse-graining methodology presented here can also be extended to other polymers.

Engineering poly- and micelleplexes for nucleic acid delivery - A reflection on their endosomal escape

For the longest time, the field of nucleic acid delivery has remained skeptical whether or not polycationic drug carrier systems would ever make it into clinical practice. Yet, with the disclosure of patents on polyethyleneimine-based RNA carriers through leading companies in the field of nucleic acid therapeutics such as BioNTech SE and the progress in clinical studies beyond phase I trials, this aloofness seems to regress. As one of the most striking characteristics of polymer-based vectors, the extraordinary tunability can be both a blessing and a curse. Yet, knowing about the adjustment screws and how they impact the performance of the drug carrier provides the formulation scientist committed to its development with a head start. Here, we equip the reader with a toolbox - a toolbox that should advise and support the developer to conceptualize a cutting-edge poly- or micelleplex system for the delivery of therapeutic nucleic acids; to be specific, to engineer the vector towards maximum endosomal escape performance at minimum toxicity. Therefore, after briefly sketching the boundary conditions of polymeric vector design, we will dive into the topic of endosomal trafficking. We will not only discuss the most recent knowledge of the endo-lysosomal compartment but further depict different hypotheses and mechanisms that facilitate the endosomal escape of polyplex systems. Finally, we will combine the different facets introduced in the previous chapters with the fundamental building blocks of polymer vector design and evaluate the advantages and drawbacks. Throughout the article, a particular focus will be placed on cellular peculiarities, not only as an additional barrier, but also to give inspiration to how such cell-specific traits might be capitalized on.

Molecular Insights into the Binding of Linear Polyethylenimines and Single-Stranded DNA Using Raman Spectroscopy: A Quantitative Approach

Establishing how polymeric vectors such as polyethylenimine (PEI) bind and package their nucleic acid cargo is vital toward developing more efficacious and cost-effective gene therapies. To develop a molecular-level picture of DNA binding, we examined how the Raman spectra of PEIs report on their local chemical environment. We find that the intense Raman bands located in the 1400-1500 cm-1 region derive from vibrations with significant CH2 scissoring and NH bending character. The Raman bands that derive from these vibrations show profound intensity changes that depend on both the local dielectric environment and hydrogen bonding interactions with the secondary amine groups on the polymer. We use these bands as spectroscopic markers to assess the binding between low molecular weight PEIs and single-stranded DNA (ssDNA). Analysis of the Raman spectra suggest that PEI primarily binds via electrostatic interactions to the phosphate backbone, which induces the condensation of the ssDNA. We additionally confirm this finding by conducting molecular dynamics simulations. We expect that the spectral correlations determined here will enable future studies to investigate important gene delivery activities, including how PEI interacts with cellular membranes to facilitate cargo internalization into cells.

Branched polyethyleneimine: CHARMM force field and molecular dynamics simulations

Polyethyleneimine (PEI), one of the non-viral vectors of great interest for gene delivery, was investigated at all-atom level, with particular emphasis on its branched form. We report the extension of our previously published CHARMM force field (FF) for linear PEI, with parameters optimized specifically for branched configurations. A new residue type for the branch connector is introduced and the charges and bonded parameters are derived from ab initio calculations based on a model polymer. The new FF is validated by extensive molecular dynamics simulations of solvated branched PEIs of various protonation fractions and branch lengths. The gyration radii, end-to-end distances, and diffusion coefficients are compared with results for linear PEIs of similar molecular weights and protonation patterns. Solvated complexes of DNA with (linear/branched) PEI were also investigated to determine favorable attachment conformations. The parametrized atomistic force field is suitable for simulations of PEI with arbitrary branching pattern, protonation, and size, and is expected to provide relevant insights regarding optimal conditions for DNA-PEI complex formation.

A model system for antiviral siRNA therapeutics using exosome-based delivery

Emerging viral diseases, such as Ebola, SARS, MERS, and the pathogen causing COVID-19, SARS-CoV-2, present a challenge for the development of therapeutics because of strict biosafety handling procedures and rapid mutation of their genomes. To facilitate the development of an adaptable and testable therapeutic model system, a colostrum exosome-based nanoparticle delivery system, EPM (exosome-PEI matrix), that overcomes stringent biosafety containment, was used to mimic the expression of viral proteins. This system would greatly expand the number of laboratories actively participating in the screening of potential therapeutics. EPM technology can deliver both plasmid DNA and siRNA to both simulate viral gene expression and screen potential antiviral siRNA therapeutics. Using this nanoplatform, three key SARS-CoV-2 proteins (the spike glycoprotein, nucleocapsid, and replicase) were expressed in vitro and in vivo. In vitro, several viral gene-targeting siRNAs were screened to determine knockdown efficiency, with some siRNA duplexes resulting in 80%-95% knockdown of corresponding protein expression. Moreover, in vivo experiments introducing the spike protein and nucleocapsid by EPM resulted in the production of antibodies against the viral antigen, measured up to 45 d after target delivery. Together, these findings support the efficacy of the EPM delivery system to establish a model for screening antiviral therapeutics-reduced biosafety level.

Polyethylenimine-DNA Nanoparticles under Endosomal Acidification and Implication to Gene Delivery

Non-viral gene delivery using polyethylenimine (PEI) has shown tremendous promise as a therapeutic technique. Through the formation of nanoparticles (NPs), PEIs protect genetic material such as DNA from degradation. Escape of the NPs from endosomes and lysosomes is facilitated by PEI's buffering capacity over a wide range of pH. However, little is known about the effects of endosomal acidification on the morphology of the NPs. In this work, large-scale coarse-grained simulations performed to mimic endosomal acidification reveal that NPs undergo a resizing process that is highly dependent on the N/P ratio (ratio of PEI nitrogen to DNA phosphate) at which they are prepared. With a low N/P ratio, NPs further aggregate after endosomal acidification, whereas with a high N/P ratio they dissociate. The mechanisms behind such NP resizing and its consequences on endosomal escape and nuclear trafficking are discussed. Based on the findings, suggestions are made on the PEI architecture that may enhance NP dissociation driven by endosomal acidification.

MicroRNA-Based Diagnosis and Therapy

MicroRNAs (miRNAs) are a group of endogenous non-coding RNAs that regulate gene expression. Alteration in miRNA expression results in changes in the profile of genes involving a range of biological processes, contributing to numerous human disorders. With high stability in human fluids, miRNAs in the circulation are considered as promising biomarkers for diagnosis, as well as prognosis of disease. In addition, the translation of miRNA-based therapy from a research setting to clinical application has huge potential. The aim of the current review is to: (i) discuss how miRNAs traffic intracellularly and extracellularly; (ii) emphasize the role of circulating miRNAs as attractive potential biomarkers for diagnosis and prognosis; (iii) describe how circulating microRNA can be measured, emphasizing technical problems that may influence their relative levels; (iv) highlight some of the circulating miRNA panels available for clinical use; (v) discuss how miRNAs could be utilized as novel therapeutics, and finally (v) update those miRNA-based therapeutics clinical trials that could potentially lead to a breakthrough in the treatment of different human pathologies.

pH-Regulated Single and Double Charge Inversions on PEI-Coated Surfaces

The pH-regulated charge inversions on polyethylenimine (PEI)-coated surfaces are indispensable to their applications in biomaterials and nanomaterials. Various PEI-coated surfaces, where single charge inversion happens, have been extensively investigated, while the surfaces where double charge inversion appears are less reported. Here, using a molecular theory, we systematically study the pH-regulated charge density of PEI-coated surfaces. The results suggest whether single or double charge inversion happens depends on PEI affinity to the surface and the bare surface charge density. The region of double charge inversion is much smaller than that of single charge inversion, revealing the reason why double charge inversion is less observed in experiments. Besides, the charge inversions are significantly influenced by the solution condition. The present work provides a useful guideline to the selection of the coated materials and the parameters of PEI solution in the design of PEI-coated surfaces aiming to promote their applications in multifunctional nanomaterials.

Linear Poly(ethylenimine-propylenimine) Random Copolymers for Gene Delivery: From Polymer Synthesis to Efficient Transfection with High Serum Tolerance

Naturally occurring oligoamines, such as spermine, spermidine, and putrescine, are well-known regulators of gene expression. These oligoamines frequently have short alkyl spacers with varying lengths between the amines. Linear polyethylenimine (PEI) is a polyamine that has been widely applied as a gene vector, with various formulations currently in clinical trials. In order to emulate natural oligoamine gene regulators, linear random copolymers containing both PEI and polypropylenimine (PPI) repeat units were designed as novel gene delivery agents. In general, statistical copolymerization of 2-oxazolines and 2-oxazines leads to the formation of gradient copolymers. In this study, however, we describe for the first time the synthesis of near-ideal random 2-oxazoline/2-oxazine copolymers through careful tuning of the monomer structures and reactivity as well as polymerization conditions. These copolymers were then transformed into near-random PEI-PPI copolymers by controlled side-chain hydrolysis. The prepared PEI-PPI copolymers formed stable polyplexes with GFP-encoding plasmid DNA, as validated by dynamic light scattering. Furthermore, the cytotoxicity and transfection efficiency of polyplexes were evaluated in C2C12 mouse myoblasts. While the polymer chain length did not significantly increase the toxicity, a higher PPI content was associated with increased toxicity and also lowered the amount of polymers needed to achieve efficient transfection. The transfection efficiency was significantly influenced by the degree of polymerization of PEI-PPI, whereby longer polymers resulted in more transfected cells. Copolymers with 60% or lower PPI content exhibited a good balance between high plasmid-DNA transfection efficiency and low toxicity. Interestingly, these novel PEI-PPI copolymers revealed exceptional serum tolerance, whereby transfection efficiencies of up to 53% of transfected cells were achieved even under 50% serum conditions. These copolymers, especially PEI-PPI with DP500 and a 1:1 PEI/PPI ratio, were identified as promising transfection agents for plasmid DNA.

Polyethylenimine/cGAMP Nanocomplexes for STING-Mediated Cancer Immunotherapy: Formulation and Characterization Using Orthogonal Techniques

Cyclic GMP-AMP (cGAMP) has lately been extensively investigated in cancer immunotherapy due its activation of the innate immunity stimulation of interferon genes (STING) pathway within antigen presenting cells (APC) leading to an increase in tumor specific CD8+ T cells. As negatively charged dinucleotides are prone to enzymatic degradation before being taken up by APC, there is a need for an appropriate carrier. Therefore, polyethylenimine (PEI), a gold standard for oligonucleotide delivery, was selected. Molecular weight, type of PEI and N/P ratio between PEI/cGAMP were investigated in terms of toxicity, efficacy and physicochemical properties of the nanocomplexes (NCs) such as size, zeta potential and shape. Due to lack of nano-medicine regulations and the need for a case-by case assessment, here we examine these parameters by several orthogonal methods, such as dynamic light scattering (DLS), nanoparticle tracking analysis (NTA) and online asymmetric flow field flow fractionation (AF4) connected to DLS. N/P ratio of 2/1 ratio using linear PEI 25 kDa resulted in larger, positively charged particles of elongated shape, which were shown to have the best toxicity/efficacy ratio among different PEIs and ratios tested.

Branched versus Linear Structure: Lowering the CO2 Desorption Temperature of Polyethylenimine-Functionalized Silica Adsorbents

Lowering the regeneration temperature for solid CO2-capture materials is one of the critical tasks for economizing CO2-capturing processes. Based on reported pKa values and nucleophilicity, we compared two different polyethylenimines (PEIs): branched PEI (BPEI) and linear PEI (LPEI). LPEI outperformed BPEI in terms of adsorption and desorption properties. Because LPEI is a solid below 73–75 °C, even a high loading amount of LPEI can effectively adsorb CO2 without diffusive barriers. Temperature-programmed desorption (TPD) demonstrated that the desorption peak top dropped to 50.8 °C for LPEI, compared to 78.0 °C for BPEI. We also revisited the classical adsorption model of CO2 on secondary amines by using in situ modulation excitation IR spectroscopy, and proposed a new adsorption configuration, R1(R2)-NCOOH. Even though LPEI is more expensive than BPEI, considering the long-term operation of a CO2-capturing system, the low regeneration temperature makes LPEI attractive for industrial applications.

New insights on the mechanism of polyethylenimine transfection and their implications on gene therapy and DNA vaccines

Polyethylenimine (PEI) has been demonstrated as an efficient DNA delivery vehicle both in vitro and in vivo. There is a consensus that PEI-DNA complexes enter the cells by endocytosis and escape from endosomes by the so-called "proton sponge" effect. However, little is known on how and where the polyplexes are de-complexed for DNA transcription and replication to occur inside the cell nucleus. To better understand this issue, we (i) tracked the cell internalization of PEI upon transfection to human epithelial cells and (ii) studied the interaction of PEI with phospholipidic layers mimicking nuclear membranes. Both the biological and physicochemical experiments provided evidence of a strong binding affinity between PEI and the lipidic bilayer. Firstly, confocal microscopy revealed that PEI alone could not penetrate the cell nucleus; instead, it arranged throughout the cytoplasm and formed a sort of aureole surrounding the nuclei periphery. Secondly, surface tension measurements, fluorescence dye leakage assays, and differential scanning calorimetry demonstrated that a combination of hydrophobic and electrostatic interactions between PEI and the phospholipidic monolayers/bilayers led to the formation of stable defects along the model membranes, allowing the intercalation of PEI through the monolayer/bilayer structure. Results are also supported by molecular dynamics simulation of the pore formation in PEI-lipidic bilayers. As discussed throughout the text, these results might shed light on a the mechanism in which the interaction between PEI and the nucleus membrane might play an active role on the DNA release: on the one hand, the PEI-membrane interaction is anticipated to facilitate the DNA disassembly from the polyplex by establishing a competition with DNA for the PEI binding and on the other hand, the forming defects are expected to serve as channels for the entrance of de-complexed DNA into the cell nucleus. A better understanding of the mechanism of transfection of cationic polymers opens paths to development of more efficiency vectors to improve gene therapy treatment and the new generation of DNA vaccines.

Marked increase in tumor transfection with a truncated branched polymer

BACKGROUND

We previously determined that polyplexes formed by linear H2K peptides were more effective in transfecting tumors in vivo than polyplexes formed by branched H2K4b-20 peptides. Based on trypsin digest and salt displacement studies, the linear H2K polyplexes were less stable than the branched H2K4b-20 polyplexes. Because binding and release of the polymer and DNA from the H2K4b-20 polyplex may account for the ineffectiveness, we investigated whether four-branched histidine-lysine (HK) peptides with varying numbers of amino acids in their branches would be more effective in their ability to increase gene expression in tumors in vivo.

METHODS

Linear and branched peptides with multiple -KHHK- motifs were synthesized by solid-phase synthesis. The branched H2K4b-20, -18, -14 and 12 peptides had 20, 18, 14 and 12 amino acids in their branches, respectively. These peptides were examined for their ability to carry luciferase-expressing plasmids to human breast cancer xenografts in a mouse model. With gel retardation and in vivo transfection, the incorporation of a targeting ligand and an endosomal lysis peptide into these polyplexes was also examined. A blocking antibody was pre-injected prior to the polyplexes to determine the role of neuropilin 1 in the uptake of these polyplexes by the tumor. The size of the polyplexes was measured by dynamic light scattering.

RESULTS

Of the four negative surface-charge polyplexes formed by the branched carriers, the H2K4b-14 polyplex was determined to be the most effective plasmid delivery platform to tumors. The incorporation of a targeting ligand and an endosomal lysis peptide into H2K4b-14 polyplexes further enhanced their ability to transfect tumors in vivo. Furthermore, after pre-injecting tumor-bearing mice with a blocking antibody to the neuropilin-1 receptor (NRP-1), there was a marked reduction of tumor gene expression with the modified H2K4b-14 polyplexes, suggesting that NRP-1 mediated their transport into the tumor.

CONCLUSIONS

The present study established that branched peptides intermediate in length were very efficient in delivering plasmids to tumors in vivo.

Foliar Delivery of siRNA Particles for Treating Viral Infections in Agricultural Grapevines

Grapevine leafroll disease (GLD) is a globally spreading viral infection that causes major economic losses by reducing crop yield, plant longevity and berry quality, with no effective treatment. Grapevine leafroll associated virus-3 (GLRaV-3) is the most severe and prevalent GLD strain. Here, we evaluated the ability of RNA interference (RNAi), a non-GMO gene-silencing pathway, to treat GLRaV-3 in infected Cabernet Sauvignon grapevines. We synthesized lipid-modified polyethylenimine (lmPEI) as a carrier for long double-stranded RNA (dsRNA, 250-bp-long) that targets RNA polymerase and coat protein genes that are conserved in the GLRaV-3 genome. Self-assembled dsRNA-lmPEI particles, 220 nm in diameter, displayed inner ordered domains spaced 7.3±2 nm from one another, correlating to lmPEI wrapping spirally around the dsRNA. The particles effectively protected RNA from degradation by ribonucleases, and Europium-loaded particles applied to grapevine leaves were detected as far as 60-cm from the foliar application point. In three field experiments, a single dose of foliar administration knocked down GLRaV-3 titer, and multiple doses of the treatment kept the viral titer at baseline and triggered recovery of the vine and berries. This study demonstrates RNAi as a promising platform for treating viral diseases in agriculture.

Controlled DNA Delivery Using Poly(lactide) Nanoparticles and Understanding the Binding Interactions

Cationic polymer-based gene delivery vectors suffer from several limitations such as low DNA-loading capacity, poor transfection, toxicity, environmental degradations, etc. Again, very limited works are available addressing the binding interactions in detail at the atomic level explaining the loading capacity, protection ability against harsh environments, and controlled release behavior of the DNA-encapsulated vehicles. Here, a poly(l-lactide) (PLA) nanoparticle-based controlled DNA release system is proposed. The developed vehicle possesses a high DNA-loading capacity and can release the loaded DNA in a controlled manner. Spectroscopic, physicochemical, and molecular simulation techniques (AM1 and atomistic molecular dynamics) have been employed to understand the binding interactions between PLA and DNA molecules enabling high DNA loading, protection against external harsh environments, and controlled DNA release behavior. Methyl thiazolyl tetrazolium (MTT) assay experiments confirm the biocompatible nature of the vehicle. Cellular uptake efficiency and endo-lysosomal escape capabilities have been investigated against HeLA cells. This study, therefore, demonstrates the development of a promising nonviral DNA delivery vector and includes a detailed investigation of the atomic-level interaction behavior between PLA and DNA molecules.

Shells of compacted DNA as nanocontainers transporting proteins in multiplexed delivery

Polyethyleneimine (PEI) polymers are known to compact DNA strands into spheroid, toroid, or rod structures. A formulation with mannose-grafted PEI (PEIm), however, was reported to compact DNA into ~100 nm spheroids that indented like thin-walled pressurized shells. The goal of the study is to understand why mannose bristles divert the traditional pathway of PEI-DNA compaction to produce shell-like structures, and to manipulate the process so that proteins can be packed into the core of the assembling shells for co-delivering DNA and proteins into cells. DLS, AFM, and TEM imaging provide a consistent picture that BSA proteins can be packed into the shells without altering the shell architecture, as long as the proteins were added during the time course of shell assembly. Force spectroscopy studies reveal that DNA shells that buckle also have a rich surface-coating of mannose, indicating that a micelle-like partitioning of hydrophobic and hydrophilic layers governs shell assembly. When HEK293T cells are spiked with BSA-laden DNA shells, co-transfection of DNA and BSA is observed at higher levels than control formulations. Distinct micron-sized features appear having both green fluorescence from BSA-FITC and blue fluorescence from NucBlue DNA stain, suggesting BSA release in nucleus and secretory granules. With DNA nanocontainers, proteins can take advantage of the efficiency of PEI-based DNA transfection for hitchhiking into cells while being shielded from the challenges of the intracellular route. DNA nanocontainers are rapid to assemble, not dependent on the DNA sequence, and can be adapted for different protein types; thereby having potential to serve as a high-throughput platform in scenarios where DNA and protein have to be released at the same site and time within cells (e.g., theranostics, multiplexed co-delivery, gene editing).

Next-Generation Vaccines: Nanoparticle-Mediated DNA and mRNA Delivery

Nucleic acid vaccines are a method of immunization aiming to elicit immune responses akin to live attenuated vaccines. In this method, DNA or messenger RNA (mRNA) sequences are delivered to the body to generate proteins, which mimic disease antigens to stimulate the immune response. Advantages of nucleic acid vaccines include stimulation of both cell-mediated and humoral immunity, ease of design, rapid adaptability to changing pathogen strains, and customizable multiantigen vaccines. To combat the SARS-CoV-2 pandemic, and many other diseases, nucleic acid vaccines appear to be a promising method. However, aid is needed in delivering the fragile DNA/mRNA payload. Many delivery strategies have been developed to elicit effective immune stimulation, yet no nucleic acid vaccine has been FDA-approved for human use. Nanoparticles (NPs) are one of the top candidates to mediate successful DNA/mRNA vaccine delivery due to their unique properties, including unlimited possibilities for formulations, protective capacity, simultaneous loading, and delivery potential of multiple DNA/mRNA vaccines. This review will summarize the many varieties of novel NP formulations for DNA and mRNA vaccine delivery as well as give the reader a brief synopsis of NP vaccine clinical trials. Finally, the future perspectives and challenges for NP-mediated nucleic acid vaccines will be explored.

Machine learning to determine optimal conditions for controlling the size of elastin-based particles

This paper evaluates the aggregation behavior of a potential drug and gene delivery system that combines branched polyethyleneimine (PEI), a positively-charged polyelectrolyte, and elastin-like polypeptide (ELP), a recombinant polymer that exhibits lower critical solution temperature (LCST). The LCST behavior of ELP has been extensively studied, but there are no quantitative ways to control the size of aggregates formed after the phase transition. The aggregate size cannot be maintained when the temperature is lowered below the LCST, unless the system exhibits hysteresis and forms irreversible aggregates. This study shows that conjugation of ELP with PEI preserves the aggregation behavior that occurs above the LCST and achieves precise aggregate radii when the solution conditions of pH (3, 7, 10), polymer concentration (0.1, 0.15, 0.3 mg/mL), and salt concentration (none, 0.2, 1 M) are carefully controlled. K-means cluster analyses showed that salt concentration was the most critical factor controlling the hydrodynamic radius and LCST. Conjugating ELP to PEI allowed crosslinking the aggregates and achieved stable particles that maintained their size below LCST, even after removal of the harsh (high salt or pH) conditions used to create them. Taken together, the ability to control aggregate sizes and use of crosslinking to maintain stability holds excellent potential for use in biological delivery systems.

New 2,9-disubstituted-1,10-phenanthroline derivatives with anticancer activity by selective targeting of telomeric G-quadruplex DNA

Fifteen new 1,10-phenanthrolines disubstituted at positions 2 and 9 via amide bonds with different heterocycles have been designed and synthesized as G-quadruplex DNA stabilizers. Ten compounds were evaluated for the in vitro anticancer activity against 60 human tumor cell lines panel, four of them showing a very good inhibitory activity on several cell lines. To assess the ability of the most active compounds to interact with G-quadruplex DNA (G4-DNA), circular dichroism experiments were performed. The potency of the compounds to stabilize the G4-DNA has been shown from the thermal denaturation experiments. The mechanism of compounds binding to DNA and to G4-DNA was theoretically investigated by molecular docking studies. The experimental results demonstrated excellent capacity of the two compounds bearing two pyridin-3-yl residues (methylated and non-methylated) to act as selective G-quadruplex binders with promising anticancer activity.

Comment on "Martini force field for protonated polyethyleneimine"

We comment on the recently published Martini forcefield for linear polyethylenimine (Beu et al., J. Comput. Chem., 2020, 41, 349). With supporting evidence, we demonstrate that the new coarse-graining methodology presented in that work is inconsistent with the Martini methodology and lacks important validation steps which is usually required by Martini forcefields.

Biocompatibility of magnetic nanoparticles coating with polycations using A549 cells

Fe₃O₄ nanoparticles were obtained by chemical coprecipitation of iron chloride and sodium hydroxide. The morphology and sizes of the obtained nanoparticles were characterized using laser Doppler velocimetry, transmission electron and atomic force microscopy. Then the nanoparticles were stabilized by three polycations (polyethylenimine (PEI), poly(allylamine hydrochloride) (PAH), poly(diallyldimethylammonium chloride) (PDADMAC)) to increase their biocompatibility. The cytotoxicity of the obtained polymer-stabilized nanoparticles was studied using a human lung carcinoma cell line (A549). The biodistribution of nanoparticles stabilized by polycations in human lung carcinoma cells was analyzed by transmission electron microscopy, and the toxicity of nanomaterials was evaluated using toxicity tests and flow cytometry. As a result, the most biocompatible nanoparticle-biopolymer complex was identified. PAH stabilized magnetic nanoparticles demonstrated the best biocompatibility, and the PEI-magnetic nanoparticle complex was the most toxic.

Effect of pH and Molecular Length on the Structure and Dynamics of Linear and Short-Chain Branched Poly(ethylene imine) in Dilute Solution: Scaling Laws from Detailed Molecular Dynamics Simulations

Atomistic molecular dynamics (MD) simulations are carried out to examine the effect of molecular weight M_w (= 0.6, 0.86, 1.12, and 2.15 kDa) and pH (or equivalently, degree of ionization, α⁺ = 0, 50, and 100%) on the structure, state of hydration, and dynamics of linear and branched poly(ethylene imine) (PEI) chains in infinitely dilute salt-free aqueous solutions. It is found that the degree of ionization is the key factor determining the type of molecular conformation adopted by PEI, regardless of molecular architecture and chain length, resulting in a stable trans conformation for fully ionized solutions and in a stable gauche⁺/gauche^- state for neutral or alternate ionized ones; in the latter case, a strong electrolyte behavior is verified for both linear and branched PEI. Linear PEI is observed to be significantly stiffer than branched PEI of the same molecular weight at 100% degree of ionization, but the effect subsides as the degree of ionization decreases. Also, linear PEI diffuses markedly slower than branched PEI of the same M_w. From the MD results, scaling exponents are deduced and reported for the conformation, solvent-accessible surface area, and dynamics of the two different PEI structures with M_w.

Cross-Plane and In-Plane Heat Conductions in Layer-by-Layer Membrane: Molecular Dynamics Study

A material with anisotropic heat conduction characteristics, which is determined by molecular scale structure, provides a way of controlling heat flow in nanoscale spaces. As such, here, we consider layer-by-layer (LbL) membranes, which are an electrostatic assembly of polyelectrolyte multilayers and are expected to have different heat conduction characteristics between cross-plane and in-plane directions. We constructed models of a poly(acrylic acid)/polyethylenimine (PAA/PEI) LbL membrane sandwiched by charged solid walls and investigated their anisotropic heat conduction using molecular dynamics simulations. In the cross-plane direction, the thermal boundary resistance between the solid wall and the LbL membrane and that between the constituent PAA and PEI layers decrease with increasing degree of ionization (solid surface charge density and the number of electric charges per PAA/PEI molecule). When the degree of ionization is low, the cross-plane thermal conductivity of a constituent layer is higher than that of the bulk state. As the degree of ionization increases, however, the cross-plane thermal conductivity of PAA, a linear polymer, decreases because of the increase in the number of in-plane oriented polymer chains. In the in-plane direction, we investigated the heat conduction of each layer and found the enhancement of effective in-plane thermal conductivity again due to the in-plane oriented chain alignment. The heat conduction in the LbL membrane is three-dimensionally enhanced compared to those in the bulk states of the constituent polymers because of the electrostatic interactions in the cross-plane direction and the molecular alignment in the in-plane direction.

Dynamic gelation of shear-induced filamentous domains for cellulose ether assemblies due to polyion complexation

Assemblies of carbohydrate polymers are important in a number of applications and improved methods for their fabrication are increasingly sought after. Herein, we report that an aqueous two-phase system of alginate (Alg) and hydroxypropyl cellulose with poly(methacrylic acid) graft chains (HPC-PMA) facilitated the assembly of Alg/HPC-PMA in both phases. Dynamically formed filamentous domains in a flow field were gelled by rapid complexation with cationic polyethyleneimine (PEI). The fabricated HPC-PMA gel filament morphologies can be switched between the bundled and dissociated gel filaments using a co-flow microfluidic device in response to the amount of supplied PEI crosslinker. Excess complexation of PEI contributes to the fabrication of cationic gel filaments; this contribution results in a dissociated structure due to electrostatic repulsion. In contrast, an appropriate amount of PEI resulted in a bundle structure. The proposed spinning method avoids the risk of nozzle clogging, and enables the one-step spinning of multiple gel filaments.

A novel method for removing polyethyleneimine from biopharmaceutical samples: improving assay sensitivity of residual DNA qPCR

Polyethyleneimine (PEI) is a flocculent that is widely used in the downstream purification of monoclonal antibodies. It is an in-process residual that is carried through the drug purification process and strongly inhibits residual DNA quantitation by real-time quantitative PCR assay. Very high sample dilutions (e.g., 1:10,000) can overcome the interference of PEI, but at the cost of DNA assay sensitivity. Diluting samples poses a significant risk to the assay sensitivity needed to satisfy regulatory requirements on the quantitation of residual genomic DNA present per dose (i.e., 10 ng/dose). Removing PEI while retaining DNA, by the use of sodium dodecyl sulfate, heparin and/or sarkosyl can overcome the interference of PEI and allow a more accurate quantitation of residual DNA.

A zipped-up tunable metal coordinated cationic polymer for nanomedicine

Incorporating metal elements into polymers is a feasible means to fabricate new materials with multiple functionalities. In this work, a metal coordinated cationic polymer (MCCP) was developed. Ferric ions were incorporated into the polyethyleneimine-β-cyclodextrin (PC) polymer chain via coordination to produce a zipped-up polymer with a micro-ordered and macro-disordered topological structure. By varying the metal concentration, a tunable superstructure could be formed on the nano-templates via the "zipping" effect. In addition, the physicochemical properties of the assembly of MCCPs and nucleic acids were tailored by tuning the composition of the metal ions and polymers. The loading efficiency of Rhodamine-B by MCCPs was enhanced. The in vitro and in vivo results showed that the hybrid materials could be adjusted to deliver nucleic acids or small molecules with good performance and acquired the capacity of generating reactive oxygen species in tumor cells. Thus, the tunable and multifunctional MCCP system has great potential in nanomedicine and biomaterial science.

Martini Force Field for Protonated Polyethyleneimine

Polyethyleneimine (PEI), one of the most widely used nonviral gene carriers, was investigated in the presented work at coarse-grained (CG) level. The main focus was on elaborating a realistic CG force field (FF) aimed to reproduce dynamic structural features of protonated PEI chains and, furthermore, to enable massive simulations of DNA-PEI complex formation and condensation. We parametrized CG Martini FF models for PEI in polarizable and nonpolarizable water by applying Boltzmann inversion techniques to all-atom (AA) probability distributions for distances, angles, and dihedrals of entire monomers. The fine-tuning of the FFs was achieved by fitting simulated CG gyration radii and end-to-end distances to their AA counterparts. The developed Martini FF models are shown to be well suited for realistic large-scale simulations of size/protonation-dependent behavior of solvated PEI chains, either individually or as part of DNA-PEI systems. © 2019 Wiley Periodicals, Inc.

Membrane lipids destabilize short interfering ribonucleic acid (siRNA)/polyethylenimine nanoparticles

Cell entry of polymeric nanoparticles (NPs) bearing polynucleotides is an important stage for successful gene delivery. In this work, we addressed the influence of cell membrane lipids on the integrity and configurational changes of NPs composed of short interfering ribonucleic acid (siRNA) and polyethylenimine. We focused on NPs derived from two different PEIs, unmodified low molecular weight PEI and linoleic acid (LA)-substituted PEI, and their interactions with two membrane lipids (zwitterionic 2-oleoyl-1-palmitoyl-sn-glycero-3-phosphocholine (POPC) and anionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-l-serine (POPS)). Our experiments showed that POPS liposomes interacted strongly with both types of NPs, which caused partial dissociation of the NPs. POPC liposomes, however, did not induce any dissociation. Consistent with the experiments, steered molecular dynamics simulations showed a stronger interaction between the NPs and the POPS membrane than between the NPs and the POPC membrane. Lipid substitution on the PEIs enhanced the stability of the NPs during membrane crossing; lipid association between PEIs of the LA-bearing NPs as well as parallel orientation of the siRNAs provided protection against their dissociation (unlike NPs from native PEI). Our observations provide valuable insight into the integrity and structural changes of PEI/siRNA NPs during membrane crossing which will help in the design of more effective carriers for nucleic acid delivery.

Polymeric Hybrid Nanomicelles for Cancer Theranostics: An Efficient and Precise Anticancer Strategy for the Codelivery of Doxorubicin/miR-34a and Magnetic Resonance Imaging

To realize precise tumor therapy, a versatile oncotherapy nanoplatform integrating both diagnostic and therapeutic functions is necessary. Herein, we fabricated a hybrid micelle (HM) utilizing two amphiphilic diblock copolymers, polyethylenimine-polycaprolactone (PEI-PCL) and diethylenetriaminepentaacetic acid gadolinium(III)  (Gd-DTPA)-conjugated polyethyleneglycol-polycaprolactone (Gd-PEG-PCL), to codeliver the small-molecule chemotherapy drugs doxorubicin (Dox) and microRNA-34a (miR-34a), denoted as Gd-HM-Dox/34a. Conjugating Gd-DTPA on the surface of hybrid micelles, leading the relaxation rate of Gd-DTPA increased more than 1.4 times (13.6 mM^-1 S^-1). Furthermore, hybrid micelles enhanced the ability of miR-34a to escape from lysosomes/endosomes and Dox release to the nucleus. In addition, the released miR-34a subsequently downregulates Bcl-2, cyclin D1, CDK6, and Bax expression and inhibits proliferation and migration of MDA-MB-231 breast cancer cells. Moreover, the suitable micelle size improved the penetration of Dox into three-dimensional (3D) multicellular spheroids compared with Gd-HM-Dox and Free Dox, generating efficient cell killing in the 3D multicellular spheroids. Furthermore, the Gd-HM-Dox/34a exhibited augmented accumulation in the tumor tissue, which improved the magnetic resonance (MR) imaging contrast of solid tumors and enhanced the combined efficiency of chemotherapeutic drugs Dox and therapeutic gene miR-34a in suppressing tumor growth on MDA-MB-231 tumor-bearing mice. Therefore, we established a hybrid micelle to offer a promising theranostic approach that inhibits tumor growth and enhances MR imaging.

MicroRNA delivery through nanoparticles

MicroRNAs (miRNAs) are attracting a growing interest in the scientific community due to their central role in the etiology of major diseases. On the other hand, nanoparticle carriers offer unprecedented opportunities for cell specific controlled delivery of miRNAs for therapeutic purposes. This review critically discusses the use of nanoparticles for the delivery of miRNA-based therapeutics in the treatment of cancer and neurodegenerative disorders and for tissue regeneration. A fresh perspective is presented on the design and characterization of nanocarriers to accelerate translation from basic research to clinical application of miRNA-nanoparticles. Main challenges in the engineering of miRNA-loaded nanoparticles are discussed, and key application examples are highlighted to underline their therapeutic potential for effective and personalized medicine.

Surface Charge-Reversible Tubular Micromotors for Extraction of Nucleic Acids in Microsystems

Extraction of nucleic acids in microsystems is of significance for biomedical applications, but the current extraction methods generally require sophisticated microchannels and external equipment, hindering their practical applications. In this work, we have demonstrated a simple, versatile and efficient approach to extract nucleic acids in microsystems by developing cationic branched polyethyleneimine (PEI)-functionalized tubular micromotors. The as-developed tubular micromotors are fabricated by a two-step process combining the template-assisted electrodeposition and carbodiimide chemistry, and contain an inner catalytic Pt layer, a middle magnetic Ni layer and an outer cationic PEI layer. They exhibit autonomous bubble-propelled motion in aqueous hydrogen peroxide solutions, which can be guided by an external magnetic field, and the surface charges can be reversibly modulated by changing the pH value of the solution. Consequently, the as-developed tubular micromotors can selectively absorb nucleic acids from acidic solutions and desorb them into alkaline solutions, leading to the extraction of nucleic acids with high efficiency without external stirring. Furthermore, they can be operated in a microchannel chip without the aid of a pumping system. Our results indicate that this PEI-functionalized tubular micromotor platform provides a novel, simple and versatile microsystem nucleic acid extraction technology, holding considerable promise for important practical applications.

CHARMM force field for protonated polyethyleneimine

We present a revised version of our previously published atomistic Chemistry at Harvard Macromolecular Mechanics (CHARMM) force field for polyethyleneimine (PEI). It is based on new residue types (with symmetric CNC backbone), whose integer charges and bonded parameters are derived from ab initio calculations on an enlarged set of model polymers. The force field is validated by extensive molecular dynamics simulations on solvated PEI chains of various lengths and protonation patterns. The profiles of the gyration radius, end-to-end distance, and diffusion coefficient fine-tune our previous results, while the simulated diffusion coefficients excellently reproduce experimental findings. The developed CHARMM force field is suitable for realistic atomistic simulations of size/protonation-dependent behavior of PEI chains, either individually or composing polyplexes, but also provides reliable all-atom distributions for deriving coarse-grained force fields for PEI. © 2018 Wiley Periodicals, Inc.

Effects of Polyethylenimine and Its Molecular Weight on the Chemical Bath Deposition of ZnO Nanowires

The addition of polyethylenimine (PEI) in the standard chemical bath deposition (CBD) of ZnO nanowires has received an increasing interest for monitoring their aspect ratio, but the physicochemical processes at work are still under debate. To address this issue, the effects of PEI are disentangled from the effects of ammonia and investigated over a broad range of molecular weight (i.e., chain length) and concentration, varying from 1300 to 750 000 and from 1.5 to 10 mM, respectively. It is shown that the addition of PEI strongly favors the elongation of ZnO nanowires by suppressing the homogeneous growth at the benefit of the heterogeneous growth as well as by changing the supersaturation level through a pH modification. PEI is further found to inhibit the development of the sidewalls of ZnO nanowires by adsorbing on their nonpolar m-planes, as supported by Raman scattering analysis. The inhibition proceeds even in the low pH range, which somehow rules out the present involvement of electrostatic interactions as the dominant mechanism for the adsorption. Furthermore, it is revealed that PEI drastically affects the nucleation process of ZnO nanowires on the polycrystalline ZnO seed layer by presumably adsorbing on the nanoparticles oriented with the m-planes parallel to the surface, reducing in turn their nucleation rate as well as inducing a significant vertical misalignment. These findings, specifically showing the effects of the PEI molecular weight and concentration, cast light onto its multiple roles in the CBD of ZnO nanowires.

Molecular Dynamics Simulations on Nucleic Acid Binding Polymers Designed To Arrest Thrombosis

Cancer-associated thrombosis is managed by the administration of anticoagulants and antithrombotic agents that have a high risk of inducing hemorrhagic complications. To develop safer strategies for antithrombotic therapy, in vivo activators of the intrinsic pathway, namely, cell-free nucleic acids (DNA and RNA) have been targeted with cationic, polyamine-based polymers. The cytotoxicity of the highly cationic polymers is a major drawback for their practical use, and biocompatible alternatives are in high demand. In this study, we carried out all-atom molecular dynamics simulations to systematically examine the DNA binding of polyamine-poly(ethylene glycol) (PEG) diblock polymers designed from biocompatible building blocks to inhibit the procoagulant activity of DNA. The differences in cationic charge, PEG chain length, and initial conformations of the polymers resulted in marked differences in their binding to DNA. We found that having an exposed cationic polyamine group is essential to polymer-DNA binding and a certain level of electrostatic interactions is necessary to maintain the bound state. Intrachain associations between the polyamine groups and PEG chains in some cases have led to a collapsed state of the polymer that precludes binding to DNA. This self-association is mainly due to a strong hydrogen bond between polymer polyamine and PEG groups and partly due to a partially charged semibranched polyamine group architecture. As polymer "masking" of DNA is thought to arrest DNA's prothrombotic activity, our findings highlight the desired structural features of the polymers for stronger DNA binding and provide insights into the design of novel antithrombotic agents.

Investigation on vascular cytotoxicity and extravascular transport of cationic polymer nanoparticles using perfusable 3D microvessel model

Vascular networks are the first sites exposed to cationic polymer nanoparticles (NPs) administered intravenously, and thus function as a barrier for NPs reaching the target organ. While cationic polymer NPs have been intensively studied as non-viral delivery systems, their biological effects in human microvessels have been poorly investigated due to a lack of appropriate in vitro systems. Here, we employed a three-dimensional microvessel on a chip, which accurately models in vivo conditions. An open and perfused microvessel surrounded by pericytes was shown to reproduce the important features of living vasculature, including barrier function and biomarkers. Using this microvessel chip, we observed contraction of the microvascular lumen induced by perfused polyethylenimine (PEI)/DNA NPs. We demonstrated that the oxidative stress present when microvessels were exposed to PEI NPs led to rearrangement of microtubules resulting in microvessel contraction. Furthermore, the transcytotic behavior of PEI NPs was analyzed in the microvessel by monitoring the escape of PEI NPs from the microvascular lumen into the perivascular region, which was not possible in two-dimensional culture systems. With our new understanding of the different behaviors of cationic polymer NPs depending on their transcytotic route, we suggest that caveolae-mediated transcytosis is a powerful route for efficient extravascular transport.

STATEMENT OF SIGNIFICANCE

Microvascular networks are not only biological system constituting largest surface area in the body and but also first site exposed to nanoparticle in vivo. While cationic polymer NPs have been intensively studied as non-viral delivery systems, its biological effects in human microvessel have been poorly investigated due to lack of appropriate in vitro systems. Here, we microengineered an open and perfused 3D pericyte incorporated microvessel model which possesses same morphological characteristic of in vivo. Using the microengineered model, this study represents the first report of transcytotic behavior of NPs in 3D microvessel, and its effect on extravasation efficiency. Our study lays the groundwork for the integration of innovative technologies to examine blood vessel-nanoparticle interaction, which a critical but ill-defined phenomenon.