Classifying surfactants with respect to their effect on lipid membrane order

The different adsorption-degradation behaviors of SARS-CoV-2 by bioactive chemicals in wastewater: The suppression kinetics and their implications for wastewater-based epidemiology

Wastewater-Based Epidemiology (WBE) is widely used to monitor the progression of SARS-CoV-2 pandemic. While there is a clear correlation between the number of COVID patients in a sewershed and the viral load in the wastewater, there is notable variability across different treatment plants. In particular, some facilities consistently exhibit higher viral content per diagnosed patient, implying a potential underestimation of the number of COVID patients, while others show a low viral load per diagnosed case, indicating potential attenuation of genetic material from the sewershed. In this study, we investigated the impact of nonylphenol ethoxylate (NPHE), linear alkylbenzene sulfonic acid (LABS), bisoctyl dimethyl ammonium chloride (BDAC), and didecyldimethylammonium chloride (DDAC), the surfactants that have been commonly used as detergents, emulsifiers, wetting agents on the stability of SARS-CoV-2 in wastewater. The results showed multiple and dynamic mechanisms, including degradation and desorption, can occur simultaneously during the interaction between SARS-CoV-2 and different chemicals depending on the physicochemical properties of each chemical. Through the elucidation of the dynamic interactions, the findings from this study could help the state health organizations and scientific community to optimize the SARS-CoV-2 wastewater-based epidemiology strategies.

Rupture of thin liquid trilayer films with soluble surfactants: fundamentals and applications to droplet coalescence

Understanding the stability of thin liquid trilayer films is of direct relevance to applications such as multilayer coatings and polymer processing. The stability of trilayer films can also be used to provide insights into emulsion dynamics, such as the rupture of the thin film formed between two droplets during coalescence. Often, emulsions are laden with surfactants and other additives, which can be present in one or both phases as well as at the interfaces between the liquids. In experimental studies, complicating factors such as variations in droplet sizes, curvatures, and collision processes make it difficult to specifically isolate the influence of surfactant transport on droplet coalescence and film rupture. The present work addresses this issue by systematic consideration of a model problem involving a thin liquid trilayer film. Surfactant is soluble in either the outer layers or the inner layer, corresponding to surfactant soluble in the droplets or the continuous phase. Rupture of the inner layer is driven by van der Waals forces. Lubrication theory is applied to derive coupled nonlinear evolution equations describing the perturbations to the interface positions and the surfactant concentrations. Our findings reveal that surfactant better stabilizes the film when soluble in the inner layer, and the stabilizing effect is more pronounced when the outer layers are thicker. These findings are consistent with experimental observations involving emulsions, where emulsions tend to be more stable when surfactant is in the continuous phase rather than in the droplets, with the distinction being more pronounced when droplets are larger.

Time-resolved fluorescence of tryptophan characterizes membrane perturbation by cyclic lipopeptides

Viscosin is a membrane-permeabilizing, cyclic lipopeptide (CLiP) produced by Pseudomonas species. Here, we have studied four synthetic analogs (L1W, V4W, L5W, and L7W), each with one leucine (Leu; L) or valine residue exchanged for tryptophan (Trp; W) by means of time-resolved fluorescence spectroscopy of Trp. To this end, we recorded the average fluorescence lifetime, rotational correlation time and limiting anisotropy, dipolar relaxation time and limiting extent of relaxation, rate constant of acrylamide quenching, effect of H2O-D2O exchange, and time-resolved half-width of the spectrum in the absence and presence of POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) liposomes. Structure, localization, and hydration of the peptides were described by molecular dynamics simulations. The combination of the parameters provides a good description of the molecular environments of the Trp positions and the behavior of viscosin as a whole. Of particular value for characterizing the impact of viscosin on the membrane is the dipolar relaxation of Trp4 in V4W, which is deeply embedded in the hydrophobic core. The limiting relaxation level represents the membrane perturbation-unlike typical membrane probes-at the site of the perturbant. Fractions of Trp4 relax at different rates; the one not in contact with water upon excitation relaxes via recruitment of a water molecule on the 10-ns timescale. This rate is sensitive to the concerted membrane perturbation by more than one lipopeptide, which appears at high lipopeptide concentration and is assumed a prerequisite for the final formation of a membrane-permeabilizing defect. Trp7 relaxes primarily with respect to neighboring Ser residues. Trp5 flips between a membrane-inserted and surface-exposed orientation.

Application of Biosurfactants in Medical Sciences

Biosurfactants derived from microorganisms have attracted widespread attention in scientific research due to their unique surface activity, low toxicity, biodegradability, antibacterial properties, and stability under extreme conditions. Biosurfactants are widely used in many fields, such as medicine, agriculture, and environmental protection. Therefore, this review aims to comprehensively review and analyze the various applications of biosurfactants in the medical field. The central roles of biosurfactants in crucial medical areas are explored, like drug delivery, induction of tumor cell differentiation or death, treating bacterial and viral effects, healing wounds, and immune regulation. Moreover, a new outlook is introduced on optimizing the capabilities of biosurfactants through modification and gene recombination for better use in medicine. The current research challenges and future research directions are described, aiming to provide valuable insights for continuous study of biosurfactants in medicine.

A comprehensive review of medium chain monoglycerides on metabolic pathways, nutritional and functional properties, nanotechnology formulations and applications in food system

A large and growing body of literature has investigated the broad antibacterial spectrum and strong synergistic antimicrobial activity of medium chain monoglycerides (MCMs) have been widely investigated. Recently, more and more researches have focused on the regulation of MCMs on metabolic health and gut microbiota both in vivo and in vitro. The current review summarizes the digestion, absorption and metabolism of MCMs. Subsequently, it focuses on the functional and nutritional properties of MCMs, including the antibacterial and antiviral characteristics, the modulation of metabolic balance, the regulation of gut microbiota, and the improvement in intestinal health. Additionally, we discuss the most recent developments and application of MCMs using nanotechnologies in food industry, poultry and pharmaceutical industry. Additionally, we analyze recent application examples of MCMs and their nanotechnology formation used in food. The development of nanotechnology platforms facilitating molecular encapsulation and functional presentation contribute to the application of hydrophobic fatty acids and monoglycerides in food preservation and their antibacterial effectiveness. This study emphasizes the metabolic mechanisms and biological activity of MCMs by summarizing the prevailing state of knowledge on this topic, as well as providing insights into prospective techniques for developing the beneficial applications of MCMs to realize the industrialized production.

A fungal protein organizes both glycogen and cell wall glucans

Glycogen is a glucose storage molecule composed of branched α-1,4-glucan chains, best known as an energy reserve that can be broken down to fuel central metabolism. Because fungal cells have a specialized need for glucose in building cell wall glucans, we investigated whether glycogen is used for this process. For these studies, we focused on the pathogenic yeast Cryptococcus neoformans, which causes ~150,000 deaths per year worldwide. We identified two proteins that influence formation of both glycogen and the cell wall: glycogenin (Glg1), which initiates glycogen synthesis, and a protein that we call Glucan organizing enzyme 1 (Goe1). We found that cells missing Glg1 lack α-1,4-glucan in their walls, indicating that this material is derived from glycogen. Without Goe1, glycogen rosettes are mislocalized and β-1,3-glucan in the cell wall is reduced. Altogether, our results provide mechanisms for a close association between glycogen and cell wall.

Exploring the Physical Properties of Lipid Membranes with Polyhydroxy Oxanorbornane Head Group Using NBD-Conjugated and DPH Fluorescent Probes

The present study focuses on exploring the physical properties of lipid membranes based on the polyhydroxy oxanorbornane (PH-ONB) headgroup, designed as synthetic analogues of naturally occurring archaeal lipid membranes. Specifically, we study two variants of PH-ONB headgroup-based lipids differing in the number of hydroxy groups present in the headgroup, with one having two hydroxy groups (ONB-2OH) and the other having three (ONB-3OH). These lipids form stable bilayer membranes. The study begins with a comprehensive analysis of the fluorescence characteristics of nitrobenzoxadiazole (NBD)-tagged ONB-based lipids in different solvent environments and within a model lipid membrane 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC). Subsequently, the physical properties of the ONB-based membranes were examined by using an NBD-tagged ONB-based probe and a commonly used extrinsic 1,6-diphenyl-1,3,5-hexatriene (DPH) fluorescent probe. The steady-state and time-resolved fluorescence properties of the NBD-tagged ONB-based probe and DPH were used to compare the physical properties of the ONB-based membranes, including polarity, fluidity, phase transition, order, hydration, location, heterogeneity, and rotational diffusion. The solid gel to liquid crystalline phase transition temperatures of ONB-2OH and ONB-3OH lipid membranes are found to be (68 ± 1) °C and (74 ± 1) °C, respectively. The variation in organization (size), fluidity, and phase transition temperature of ONB-based lipid membranes is explained by the extent of hydrogen bonding interactions between lipid head groups. ONB-based membranes exhibit characteristics similar to those of phospholipid membranes and possess a notably high phase transition temperature. These properties make them a promising and cost-effective synthetic alternative to archaeal lipid membranes with a wide range of potential applications.

Three Dimensional Bioprinting for Hepatic Tissue Engineering: From In Vitro Models to Clinical Applications

Fabrication of functional organs is the holy grail of tissue engineering and the possibilities of repairing a partial or complete liver to treat chronic liver disorders are discussed in this review. Liver is the largest gland in the human body and plays a responsible role in majority of metabolic function and processes. Chronic liver disease is one of the leading causes of death globally and the current treatment strategy of organ transplantation holds its own demerits. Hence there is a need to develop an in vitro liver model that mimics the native microenvironment. The developed model should be a reliable to understand the pathogenesis, screen drugs and assist to repair and replace the damaged liver. The three-dimensional bioprinting is a promising technology that recreates in vivo alike in vitro model for transplantation, which is the goal of tissue engineers. The technology has great potential due to its precise control and its ability to homogeneously distribute cells on all layers in a complex structure. This review gives an overview of liver tissue engineering with a special focus on 3D bioprinting and bioinks for liver disease modelling and drug screening.

SDBS induces multiple catalase conformations in a dose-dependent manner

Amyloid fibrils have been linked to several incurable diseases. They are long and thin fibrous proteins that self-assemble into fibrils. Small molecules can stimulate amyloid fibrillation, but the mechanism by which this happens is not well understood. This study examined how a negatively charged benzene ring containing surfactant, sodium dodecylbenzene sulphonate (SDBS), affects the fibrillation of bovine liver catalase (BLC). After SDBS treatment, BLC conformational changes were examined in vitro using turbidity, RLS kinetics, intrinsic fluorescence, ThT fluorescence, far-UV CD, and TEM. BLC in the native state was alpha-helical at pH 7.4, while it was converted to a random coil structure at pH 2.0. Far-UV CD and intrinsic fluorescence data showed that at concentrations <0.1 mM of SDBS, randomly coiled BLC assumed a native-like alpha-helical structure. However, between 0.1 and 1.0 mM SDBS, BLC was aggregated. ThT fluorescence and far-UV CD measurements showed the amyloid-like structures in the aggregated BLC. At higher SDBS concentrations (>1.0 mM) at pH 2.0, BLC again attains a native-like alpha-helical structure. It is essential for therapeutic purposes to clearly understand the process underlying surfactant- or lipid-induced fibrillation.

Surfactin molecules with a cone-like structure promote the formation of membrane domains with negative spontaneous curvature and induce membrane invaginations

Surfactin uniquely influences lipid bilayer structure by initially inducing membrane invaginations before solubilization. In this study, we exposed DOPC giant vesicles to various surfactin concentrations at different temperatures and observed surfactin-induced membrane invaginations by using differential interference contrast and confocal laser fluorescence microscopy. These invaginations were stable at room temperature but not at higher temperatures. Surfactin molecules induce membrane nanodomains with negative spontaneous curvature and membrane invaginations despite their intrinsic conical shape and intrinsic positive curvature. Considering the experimentally observed capacity of surfactin to fluidize lipid acyl chains and induce partial dehydration of lipid headgroups, we propose that the resulting surfactin-lipid complexes exhibit a net negative spontaneous curvature. We further conducted 3D numerical Monte Carlo (MC) simulations to investigate the behaviour of vesicles containing negative curvature nanodomains within their membrane at varying temperatures. MC simulations demonstrated strong agreement with experimental results, revealing that invaginations are preferentially formed at low temperatures, while being less pronounced at elevated temperatures. Our findings go beyond the expectations of the Israelachvili molecular shape and packing concepts analysis. These concepts do not take into account the influence of specific interactions between neighboring molecules on the inherent shapes of molecules and their arrangement within curved membrane nanodomains. Our work contributes to a more comprehensive understanding of the complex factors governing vesicle morphology and membrane organization and provides insight into the role of detergent-lipid interactions in modulating vesicle morphology.

Recent advances in soluble decellularized extracellular matrix for heart tissue engineering and organ modeling

Despite the advent of tissue engineering (TE) for the remodeling, restoring, and replacing damaged cardiovascular tissues, the progress is hindered by the optimal mechanical and chemical properties required to induce cardiac tissue-specific cellular behaviors including migration, adhesion, proliferation, and differentiation. Cardiac extracellular matrix (ECM) consists of numerous structural and functional molecules and tissue-specific cells, therefore it plays an important role in stimulating cell proliferation and differentiation, guiding cell migration, and activating regulatory signaling pathways. With the improvement and modification of cell removal methods, decellularized ECM (dECM) preserves biochemical complexity, and bio-inductive properties of the native matrix and improves the process of generating functional tissue. In this review, we first provide an overview of the latest advancements in the utilization of dECM in in vitro model systems for disease and tissue modeling, as well as drug screening. Then, we explore the role of dECM-based biomaterials in cardiovascular regenerative medicine (RM), including both invasive and non-invasive methods. In the next step, we elucidate the engineering and material considerations in the preparation of dECM-based biomaterials, namely various decellularization techniques, dECM sources, modulation, characterizations, and fabrication approaches. Finally, we discuss the limitations and future directions in fabrication of dECM-based biomaterials for cardiovascular modeling, RM, and clinical translation.

Vesicle budding caused by lysolipid-induced asymmetry stress

Lysolipids such as lauroyl, myristoyl, and palmitoyl lysophosphatidylcholine (LPC) insert into the outer leaflet of liposomes but do not flip to the inner leaflet over many hours. This way, they create asymmetry stress between the intrinsic areas of the two leaflets. We have studied how this stress is relaxed with particular emphasis on the budding and fission of small (diameter 20-30 nm) daughter vesicles (DVs). Asymmetric flow field-flow fractionation was utilized to quantify the extent of budding from large unilamellar vesicles after exposure to LPC. Budding starts at a low threshold of the order of 2 mol% LPC in the outer (and ≈0 mol% LPC in the inner) leaflet. We see reason to assume that the fractional fluorescence intensity from DVs is a good approximation for the fraction of membrane lipid, POPC, transferred into DVs. Accordingly, budding starts with a "budding power" of ≈6 POPC molecules budding off per LPC added, corresponding to a more than 10-fold accumulation of LPC in the outer leaflet of DVs to ≈24 mol%. As long as budding is possible, little strain is built up in the membranes, a claim supported by the lack of changes in limiting fluorescence anisotropy, rotational correlation time, and fluorescence lifetime of symmetrically and asymmetrically inserted TMA-DPH. At physiological osmolarity, budding is typically limited to 20-30% of budded fraction with some batch-to-batch variation, but independent of the LPC species. We hypothesize that the budding limit is determined by the excess area of the liposomes upon preparation, which is then used up upon budding given the larger area-to-volume ratio of smaller liposomes. As the mother vesicles approach ideal spheres, budding must stop. This is qualitatively supported by increased and decreased budding limits of osmotically predeflated and preinflated vesicles, respectively.

Structural modulation of membrane-intercalating conjugated oligoelectrolytes decouples outer membrane permeabilizing and antimicrobial activities

We report a series of membrane-intercalating conjugated oligoelectrolytes (MICOEs) to probe how structural features impact bacterial membrane integrity and antibiotic activity. Minimum inhibitory concentrations (MICs) and outer membrane (OM) permeability correlated to different structural parameters suggesting that the antimicrobial mechanism is not related to OM permeabilization. However, lipid order parameters and MICs correlated to the same structural feature suggesting a possible link.

Environmental concentrations of anionic surfactants in lake surface microlayers enhance the toxicity of Microcystis blooms: Insight from photosynthesis, interspecies competition, and MC production

Anionic surfactants represented by linear alkylbenzene sulfonate (LAS) exhibit vertical heterogeneity of concentrations in aquatic environments owing to their amphiphilic structure. Field investigations showed that the concentration of anionic surfactants (mainly LAS) in the water surface microlayer (SML) of Lake Taihu reached 580 μg/L, higher than that in the lower layer. Floating Microcystis blooms overlap in space with the high concentration of anionic surfactants in SML. However, few studies have focused on the effects of anionic surfactants (e.g., LAS) on the interspecies competition between toxic and nontoxic Microcystis. In this study, coculture and monoculture experiments were conducted with both toxic and nontoxic Microcystis species to explore how the environmental concentration of LAS regulates the dominance of toxic Microcystis and toxicity from the perspective of photosynthesis, species dominance, and MC production. The results showed that LAS concentrations above 0.267 or 0.431 mg/L (depending on light conditions) selectively promoted the photosynthetic competitive advantage of toxic Microcystis, leading to its higher population proportion in the community. Additionally, LAS concentrations above 0.5 mg/L induced the synthesis and release of microcystins (MCs). The results of chlorophyll fluorescence analysis, electron microscopy and transcriptome sequencing suggested that compared with nontoxic Microcystis, toxic Microcystis can better resist LAS stress by dissipating excess light, maintaining an intact membrane structure and maintaining cellular homeostasis. Transcriptome sequencing revealed that the photosynthetic damage of nontoxic Microcystis might be attributed to the impacts of LAS on the absorption and assimilation of nitrogen, which finally resulted in the degradation of phycobilisomes. This study can provide novel insight for establishing standards and safety management of wastewater discharge.

Bovine liver catalase turns into three conformational states after exposure to an anionic surfactant

The mechanism by which anionic surfactants promote amyloid fibril is not well understood. Here, we investigated how sodium dodecyl sulfate (SDS), a negatively charged surfactant, affects the fibrillation of the partially unfolded random-coiled bovine liver catalase (BLC) at a pH of 2.0. We used several methods, including turbidity, RLS kinetics, intrinsic fluorescence, ThT fluorescence, far-UV CD, and TEM imaging, to evaluate the conformational changes of BLC in vitro in response to SDS treatment. BLC is a multimeric protein and well folded at physiological pH but forms a random coil structure at pH 2.0. Intrinsic fluorescence and far-UV CD data showed that below 0.1 mM SDS, random coiled BLC turned into a native-like structure. BLC incubated with an SDS concentration ranging from 0.1 to 2.0 mM led to the formation of aggregates. The ThT fluorescence intensity was enhanced in the aggregated BLC samples (0.1-2.0 mM SDS), and cross beta-sheeted structure was detected by the far UV CD measurements. BLC adopts a complete alpha-helical structure upon interacting with SDS at a more than 2.0 mM concentration at pH 2.0. Understanding the mechanism of surfactant- or lipid-induced fibrillation is important for therapeutic purposes.

Phospholipid headgroup composition modulates the molecular interactions and antimicrobial effects of sulfobetaine zwitterionic detergents against the "ESKAPE" pathogen Pseudomonas aeruginosa

We determine the efficacy for three known structurally related, membrane active detergents against multidrug resistant and wild type strains of Pseudomonas aeruginosa. Accessible solution state NMR experiments are used to quantify phospholipid headgroup composition of the microbial membranes and to gain molecular level insight into antimicrobial mode of action.

Antagonistic Toxic Effects of Surfactants Mixtures to Bacteria Pseudomonas putida and Marine Microalgae Phaeodactylum tricornutum

Surfactants can be found in an ever-widening variety of products and applications, in which the combination of several types of surfactants is used to reinforce their properties, looking for synergistic effects between them. After use, they tend to be discarded into wastewater, ending up in aquatic bodies with concerning harmful and toxic effects. The aim of this study is the toxicological assessment of three anionic surfactants (ether carboxylic derivative, EC) and three amphoteric surfactants (amine-oxide-based, AO), individually and in binary mixtures of them (1:1 w/w), to bacteria Pseudomonas putida and marine microalgae Phaeodactylum tricornutum. Critical Micelle Concentration (CMC) was determined to demonstrate the capacity to reduce surface tension and the toxicity of the surfactants and mixtures. Zeta potential (ζ-potential) and micelle diameter (MD) were also determined to confirm the formation of mixed surfactant micelles. The Model of Toxic Units (MTUs) was used to quantify the interactions of surfactants in binary mixtures and to predict if the concentration addition or response addition principle can be assumed for each mixture. The results showed a higher sensitivity of microalgae P. tricornutum to the surfactants tested and their mixtures than bacteria P. putida. Antagonism toxic effects have been detected in the mixture of EC + AO and in one binary mixture of different AOs; this is to say, the mixtures showed lower toxicity than expected.

Evaluation of decellularization process for developing osteogenic bovine cancellous bone scaffolds in-vitro

Current immunological issues in bone grafting regarding the transfer of xenogeneic donor bone cells into the recipient are challenging the industry to produce safer acellular natural matrices for bone regeneration. The aim of this study was to investigate the efficacy of a novel decellularization technique for producing bovine cancellous bone scaffold and compare its physicochemical, mechanical, and biological characteristics with demineralized cancellous bone scaffold in an in-vitro study. Cancellous bone blocks were harvested from a bovine femoral head (18-24 months old) subjected to physical cleansing and chemical defatting, and further processed in two ways. Group I was subjected to demineralization, while Group II underwent decellularization through physical, chemical, and enzymatic treatments. Both were then freeze-dried, and gamma radiated, finally producing a demineralized bovine cancellous bone (DMB) scaffold and decellularized bovine cancellous bone (DCC) scaffold. Both DMB and DCC scaffolds were subjected to histological evaluation, scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS), fourier-transform infrared spectroscopy (FTIR), quantification of lipid, collagen, and residual nucleic acid content, and mechanical testing. The osteogenic potential was investigated through the recellularization of scaffolds with human osteoblast cell seeding and examined for cell attachment, proliferation, and mineralization by Alizarin staining and gene expression. DCC produced a complete acellular extracellular matrix (ECM) with the absence of nucleic acid content, wider pores with extensive interconnectivity and partially retaining collagen fibrils. DCC demonstrated a higher cell proliferation rate, upregulation of osteogenic differentiation markers, and substantial mineralized nodules production. Our findings suggest that the decellularization technique produced an acellular DCC scaffold with minimal damage to ECM and possesses osteogenic potential through the mechanisms of osteoconduction, osteoinduction, and osteogenesis in-vitro.

Screening for bilayer-active and likely cytotoxic molecules reveals bilayer-mediated regulation of cell function

A perennial problem encountered when using small molecules (drugs) to manipulate cell or protein function is to assess whether observed changes in function result from specific interactions with a desired target or from less specific off-target mechanisms. This is important in laboratory research as well as in drug development, where the goal is to identify molecules that are unlikely to be successful therapeutics early in the process, thereby avoiding costly mistakes. We pursued this challenge from the perspective that many bioactive molecules (drugs) are amphiphiles that alter lipid bilayer elastic properties, which may cause indiscriminate changes in membrane protein (and cell) function and, in turn, cytotoxicity. Such drug-induced changes in bilayer properties can be quantified as changes in the monomer↔dimer equilibrium for bilayer-spanning gramicidin channels. Using this approach, we tested whether molecules in the Pathogen Box (a library of 400 drugs and drug-like molecules with confirmed activity against tropical diseases released by Medicines for Malaria Venture to encourage the development of therapies for neglected tropical diseases) are bilayer modifiers. 32% of the molecules in the Pathogen Box were bilayer modifiers, defined as molecules that at 10 µM shifted the monomer↔dimer equilibrium toward the conducting dimers by at least 50%. Correlation analysis of the molecules' reported HepG2 cell cytotoxicity to bilayer-modifying potency, quantified as the shift in the gramicidin monomer↔dimer equilibrium, revealed that molecules producing <25% change in the equilibrium had significantly lower probability of being cytotoxic than molecules producing >50% change. Neither cytotoxicity nor bilayer-modifying potency (quantified as the shift in the gramicidin monomer↔dimer equilibrium) was well predicted by conventional physico-chemical descriptors (hydrophobicity, polar surface area, etc.). We conclude that drug-induced changes in lipid bilayer properties are robust predictors of the likelihood of membrane-mediated off-target effects, including cytotoxicity.

Effect of surfactants on SARS-CoV-2: Molecular dynamics simulations

Surfactants are commonly used as disinfection agents in personal care products against bacteria and viruses, including SARS-CoV-2. However, there is a lack of understanding of the molecular mechanisms of the inactivation of viruses by surfactants. Here, we employ coarse grain (CG) and all-atom (AA) molecular dynamics simulations to investigate the interaction between general families of surfactants and the SARS-CoV-2 virus. To this end, we considered a CG model of a full virion. Overall, we found that surfactants have only a small impact on the virus envelope, being inserted into the envelope without dissolving it or generating pores, at the conditions considered here. However, we found that surfactants may induce a deep impact on the spike protein of the virus (responsible for its infectivity), easily covering it and inducing its collapse over the envelope surface of the virus. AA simulations confirmed that both negatively and positively charged surfactants are able to extensively adsorb over the spike protein and get inserted into the virus envelope. Our results suggest that the best strategy for the design of surfactants as virucidal agents will be to focus on those strongly interacting with the spike protein.

Effect of the number of sugar units on the interaction between diosgenyl saponin and membrane lipids

Saponin is the main bioactive component of the Dioscorea species, which are traditionally used for treating chronic diseases. An understanding of the interaction process of bioactive saponins with biomembranes provides insights into their development as therapeutic agents. The biological effects of saponins have been thought to be associated with membrane cholesterol (Chol). To shed light on the exact mechanisms of their interactions, we investigated the effects of diosgenyl saponins trillin (TRL) and dioscin (DSN) on the dynamic behavior of lipids and membrane properties in palmitoyloleolylphosphatidylcholine (POPC) bilayers using solid-state NMR and fluorescence spectroscopy. The membrane effects of diosgenin, a sapogenin of TRL and DSN, are similar to those of Chol, suggesting that diosgenin plays a major role in membrane binding and POPC chain ordering. The amphiphilicity of TRL and DSN enabled them to interact with POPC bilayers, regardless of Chol. In the presence of Chol, the sugar residues more prominently influenced the membrane-disrupting effects of saponins. The activity of DSN, which bears three sugar units, led to perturbation and further disruption of the membrane in the presence of Chol. However, TRL, which bears one sugar residue, increased the ordering of POPC chains while maintaining the integrity of the bilayer. This effect on the phospholipid bilayers is similar to that of cholesteryl glucoside. The influence of the number of sugars in saponin is discussed in more detail.

Cell-Derived Vesicles with Increased Stability and On-Demand Functionality by Equipping Their Membrane with a Cross-Linkable Copolymer

Cell-derived vesicles retain the cytoplasm and much of the native cell membrane composition. Therefore, they are attractive for investigations of membrane biophysics, drug delivery systems, and complex molecular factories. However, their fragility and aggregation limit their applications. Here, the mechanical properties and stability of giant plasma membrane vesicles (GPMVs) are enhanced by decorating them with a specifically designed diblock copolymer, cholesteryl-poly[2-aminoethyl methacrylate-b-poly(ethylene glycol) methyl ether acrylate]. When cross-linked, this polymer brush enhances the stability of the GPMVs. Furthermore, the pH-responsiveness of the copolymer layer allows for a controlled cargo loading/release, which may enable various bioapplications. Importantly, the cross-linked-copolymer GPMVs are not cytotoxic and preserve in vitro membrane integrity and functionality. This effective strategy to equip the cell-derived vesicles with stimuli-responsive cross-linkable copolymers is expected to open a new route to the stabilization of natural membrane systems and overcome barriers to biomedical applications.

Complex formation of potassium salt of highly fatty acid with hemagglutinin protein in influenza virus via exothermic interaction

In our previous study, we found highly fatty acid salts, which are a skin-friendly soaps, had a high ability to inactivate the influenza virus. In order to elucidate the mechanism of inactivation of influenza virus, we investigated interactions and complex formation of potassium tetradecanoate (C14K) as a highly fatty acid salt with a virus particle (VP) derived from avian influenza virus by using isothermal titration calorimetry (ITC) and small-angle X-ray scattering (SAXS). ITC showed C14K attractively interacted with hemagglutinin protein (HA) which exists in the envelop of VP. SAXS analyses revealed C14K formed highly ordered complex with HA through the attractive interaction. Since the HA is responsible for cell entry events, inactivation of influenza viruses by highly fatty acid salts are derived owing to HA inhibition of influenza viruses through the complex formation. Time-resolved SAXS measurements elucidated the complex formation was completed within 40 s after mixing aqueous solutions of C14K and VP. This result strongly suggests that hand-washing with a highly fatty acid salts is an effective measure to prevent infection with influenza virus without causing rough hands.

•

Pottasium salts of fatty acids show negative change of enthalpy of mixing with influenza viruses.

•

Fatty acid salts form complexes with hemagglutinin of influenza viruses through electrostatic interaction.

•

The electrostatic complex of fatty acid salts and hemagglutinin forms ordered lamellar structures.

•

Inactivation of influenza virus by fatty acid salts is related to hemagglutinin inhibition.

Optimized cell growth and poly(3-hydroxybutyrate) synthesis from saponified spent coffee grounds oil

Abstract

Spent coffee ground (SCG) oil is an ideal substrate for the biosynthesis of polyhydroxyalkanoates (PHAs) by Cupriavidus necator. The immiscibility of lipids with water limits their bioavailability, but this can be resolved by saponifying the oil with potassium hydroxide to form water-soluble fatty acid potassium salts and glycerol. Total saponification was achieved with 0.5 mol/L of KOH at 50 °C for 90 min. The relationship between the initial carbon substrate concentration (C₀) and the specific growth rate (µ) of C. necator DSM 545 was evaluated in shake flask cultivations; crude and saponified SCG oils were supplied at matching initial carbon concentrations (C₀ = 2.9–23.0 g/L). The Han-Levenspiel model provided the closest fit to the experimental data and accurately described complete growth inhibition at 32.9 g/L (C₀ = 19.1 g/L) saponified SCG oil. Peak µ-values of 0.139 h⁻¹ and 0.145 h⁻¹ were obtained with 11.99 g/L crude and 17.40 g/L saponified SCG oil, respectively. Further improvement to biomass production was achieved by mixing the crude and saponified substrates together in a carbon ratio of 75:25% (w/w), respectively. In bioreactors, C. necator initially grew faster on the mixed substrates (µ = 0.35 h⁻¹) than on the crude SCG oil (µ = 0.23 h⁻¹). After harvesting, cells grown on crude SCG oil obtained a total biomass concentration of 7.8 g/L and contained 77.8% (w/w) PHA, whereas cells grown on the mixed substrates produced 8.5 g/L of total biomass and accumulated 84.4% (w/w) of PHA.

Key points

• The bioavailability of plant oil substrates can be improved via saponification.

• Cell growth and inhibition were accurately described by the Han-Levenpsiel model.

• Mixing crude and saponified oils enable variation of free fatty acid content.

Surfactant-Mediated Solubilization of Myelin Figures: A Multistep Morphological Cascade

Lamellar mesophases of insoluble lipids are readily solubilized by the micellar mesophases of soluble surfactants. This simple process underscores a broad array of biochemical methodologies, including purification, reconstitution, and crystallization of membrane proteins, as well as the isolation of detergent-resistant membrane fractions. Although much is now known about the thermodynamic driving forces of membrane solubilization, the kinetic pathways by which the surfactant alters vesicular mesophases are only beginning to be appreciated. Little is known about how these interactions affect the solubilization of more complex, multilamellar mesophases. Here, we investigate how a common zwitterionic detergent affects the solubilization of a smectic, multilamellar, cylindrical mesophase of lipids, called the myelin figure. Our results reveal that myelin solubilization occurs in a multistep manner, producing a well-defined sequence of morphologically distinct intermediates en route to complete solubilization. The kinetic processes producing these intermediates include (1) coiling, which encompasses the formation, propagation, and tightening of extended helices; (2) thinning, which reflects the unbinding of lamellae in the smectic stacks; and (3) detachment or retraction, which either dissociates the myelinic protrusion from the source lipid mass or returns the myelinic protrusion to the source lipid mass─all in transit toward complete solubilization. These occasionally overlapping steps are most pronounced in single-lipid component myelins, while compositionally graded multicomponent myelins inhibit the coiling step and detach more frequently. Taken together, the appearance of these intermediates during the solubilization of myelins suggests a complex free-energy landscape characterizing myelin solubilization populated by metastable, morphological intermediates correlated with locally minimized changes in energy dependent upon the mesophase's composition. This then predicts the accessibility of structurally distinct, kinetic intermediates─such as loose and tight coiled helices, peeled myelins, retracted tubes, and detached protrusions─before reaching the stable ground state corresponding to a dissolved suspension of mixed surfactant-lipid micelles.

Emerging Paradigms in Bioengineering the Lungs

In end-stage lung diseases, the shortage of donor lungs for transplantation and long waiting lists are the main culprits in the significantly increasing number of patient deaths. New strategies to curb this issue are being developed with the help of recent advancements in bioengineering technology, with the generation of lung scaffolds as a steppingstone. There are various types of lung scaffolds, namely, acellular scaffolds that are developed via decellularization and recellularization techniques, artificial scaffolds that are synthesized using synthetic, biodegradable, and low immunogenic materials, and hybrid scaffolds which combine the advantageous properties of materials in the development of a desirable lung scaffold. There have also been advances in the design of bioreactors in terms of providing an optimal regenerative environment for the maturation of functional lung tissue over time. In this review, the emerging paradigms in the field of lung tissue bioengineering will be discussed.

Enhanced permeation by amphiphilic surfactant is spatially heterogenous at membrane and cell level

In the context of increased interest in permeability enhancement technologies to achieve mucosal delivery of drugs and biologics, we report our study on effects of the amphiphilic surfactant at cell membrane and cell population levels. Our results show that modulation in membrane order and fluidity initially occurs on insertion of individual surfactant molecules into the outer leaflet of membrane lipid bilayer; a process occurring at concentrations below surfactant's critical micellar concentration. The surfactant insertion, and consequent increase in membrane fluidity, are observed to be spatially heterogenous, i.e. manifested as 'patches' of increased membrane fluidity. At the cell population level, spatially heterogeneous activity of surfactant is also manifested, with certain cells displaying high permeability amongst a 'background' population. We propose that this heterogeneity is further manifested in a broad profile of intracellular and nuclear exposure levels to a model drug (doxorubicin) observed in cell population. The study points to heterogeneous nature of surfactant effects at cell membrane and cells in population levels.

Microfluidic Surgery in Single Cells and Multicellular Systems

Microscale surgery on single cells and small organisms has enabled major advances in fundamental biology and in engineering biological systems. Examples of applications range from wound healing and regeneration studies to the generation of hybridoma to produce monoclonal antibodies. Even today, these surgical operations are often performed manually, but they are labor intensive and lack reproducibility. Microfluidics has emerged as a powerful technology to control and manipulate cells and multicellular systems at the micro- and nanoscale with high precision. Here, we review the physical and chemical mechanisms of microscale surgery and the corresponding design principles, applications, and implementations in microfluidic systems. We consider four types of surgical operations: (1) sectioning, which splits a biological entity into multiple parts, (2) ablation, which destroys part of an entity, (3) biopsy, which extracts materials from within a living cell, and (4) fusion, which joins multiple entities into one. For each type of surgery, we summarize the motivating applications and the microfluidic devices developed. Throughout this review, we highlight existing challenges and opportunities. We hope that this review will inspire scientists and engineers to continue to explore and improve microfluidic surgical methods.

A Surfactant Enables Efficient Membrane Spanning by Non-Aggregating DNA-Based Ion Channels

DNA nanotechnology makes use of hydrophobically modified constructs to create synthetic membrane protein mimics. However, nucleic acid structures exhibit poor insertion efficiency, leading to a low activity of membrane-spanning DNA protein mimics. It is suggested that non-ionic surfactants improve insertion efficiency, partly by disrupting hydrophobicity-mediated clusters. Here, we employed confocal microscopy and single-molecule transmembrane current measurements to assess the effects of the non-ionic surfactant octylpolyoxyethylene (oPOE) on the clustering behavior and membrane activity of cholesterol-modified DNA nanostructures. Our findings uncover the role of aggregation in preventing bilayer interactions of hydrophobically decorated constructs, and we highlight that premixing DNA structures with the surfactant does not disrupt the cholesterol-mediated aggregates. However, we observed the surfactant's strong insertion-facilitating effect, particularly when introduced to the sample separately from DNA. Critically, we report a highly efficient membrane-spanning DNA construct from combining a non-aggregating design with the addition of the oPOE surfactant.

Personal care formulations demonstrate virucidal efficacy against multiple SARS-CoV-2 variants of concern: Implications for hand hygiene and public health

Despite considerable progress being made on vaccine roll out, practicing proper hand hygiene has been advocated as a consistent precautionary intervention against the circulating and emerging variants of SARS-CoV-2. Two variants of concern, namely beta and delta, have been shown to exhibit enhanced transmissibility, high viral load, and ability to escape antibody-mediated neutralization. In this report we have empirically determined the efficacy of selected personal care formulations from Unilever in inactivating the beta and delta variants of SARS-CoV-2 under simulated real-life conditions. All the formulations demonstrated greater than 99.9% reduction in viral infective titres which is comparable to inactivation of the original strain of SARS-CoV-2 virus tested under the same conditions. Therefore, it can be concluded that well-designed personal care formulations when tested under consumer-centric conditions, and with proven efficacy against the parent strain of SARS-CoV-2 will continue to be effective against extant and emerging variants of SARS-CoV-2.

Real-Time Monitoring the Staged Interactions between Cationic Surfactants and a Phospholipid Bilayer Membrane

The cationic surfactant-lipid interaction directs the development of novel types of nanodrugs or nanocarriers. The membrane action of cationic surfactants also has a wide range of applications. In this work,...

Stress adaptation signature into the functional units of spike, envelope, membrane protein and ssRNA of SARS-CoV-2

Pandemic coronavirus causes respiratory, enteric and sometimes neurological diseases. Proteome data of individual coronavirus strains were already reported. Here we investigated of SARS-CoV-2 ssRNA and protein of spike, envelope and membrane to determine stress adaptation profile. Thermodynamic properties, Physicochemical behaviour and, amino acid composition along with their RMSD value was analysed. Thermodynamic index of SARS-CoV2 spike, envelope and membrane ssRNA is unstable in higher temperature. Presence of higher proportion of polar with positive and negative charged amino acid residues into spike (S), envelope (E) and membrane (M) protein indicate the lower stress adaptability pattern. Our study represented several unstable pockets into S, E and M proteins of SARS-CoV-2 against different abiotic stresses, specifically higher in spike protein. Contact with heat through solvent may denature the architectural network of SARS-CoV-2 spike, envelope and membrane ssRNA and structural protein. The stress instability index of SARS-CoV-2 and the interactome profile of its transmembrane proteins may help to reveal novel factors for inhibiting SARS-CoV-2 growth.

Small-diameter artery decellularization: Effects of anionic detergent concentration and treatment duration on porcine internal thoracic arteries

Engineered replacement materials have tremendous potential for vascular applications where over 400,000 damaged and diseased blood vessels are replaced annually in the United States alone. Unlike large diameter blood vessels, which are effectively replaced by synthetic materials, prosthetic small-diameter vessels are prone to early failure, restenosis, and reintervention surgery. We investigated the differential response of varying 0%-6% sodium dodecyl sulfate and sodium deoxycholate anionic detergent concentrations after 24 and 72 h in the presence of DNase using biochemical, histological, and biaxial mechanical analyses to optimize the decellularization process for xenogeneic vascular tissue sources, specifically the porcine internal thoracic artery (ITA). Detergent concentrations greater than 1% were successful at removing cytoplasmic and cell surface proteins but not DNA content after 24 h. A progressive increase in porosity and decrease in glycosaminoglycan (GAG) content was observed with detergent concentration. Augmented porosity was likely due to the removal of both cells and GAGs and could influence recellularization strategies. The treatment duration on the other hand, significantly improved decellularization by reducing DNA content to trace amounts after 72 h. Prolonged treatment times reduced laminin content and influenced the vessel's mechanical behavior in terms of altered circumferential stress and stretch while further increasing porosity. Collectively, DNase with 1% detergent for 72 h provided an effective and efficient decellularization strategy to be employed in the preparation of porcine ITAs as bypass graft scaffolding materials with minor biomechanical and histological penalties.

Microneedle-Mediated Vaccination: Innovation and Translation

Vaccine administration by subcutaneous or intramuscular injection is the most commonly prescribed route for inoculation, however, it is often associated with some deficiencies such as low compliance, high professionalism, and risk of infection. Therefore, the application of microneedles for vaccine delivery has gained widespread interests in the past few years due to its high compliance, minimal invasiveness, and convenience. This review focuses on recent advances in the development and application of microneedles for vaccination based on different delivery strategies, and introduces the current status of microneedle-mediated vaccination in clinical translation. The prospects for its application including opportunities and challenges are further discussed.

In Silico and In Vitro Evaluation of the Antimicrobial Potential of Bacillus cereus Isolated from Apis dorsata Gut against Neisseria gonorrhoeae

Antimicrobial resistance is a major public health and development concern on a global scale. The increasing resistance of the pathogenic bacteria Neisseria gonorrhoeae to antibiotics necessitates efforts to identify potential alternative antibiotics from nature, including insects, which are already recognized as a source of natural antibiotics by the scientific community. This study aimed to determine the potential of components of gut-associated bacteria isolated from Apis dorsata, an Asian giant honeybee, as an antibacterial against N. gonorrhoeae by in vitro and in silico methods as an initial process in the stage of new drug discovery. The identified gut-associated bacteria of A. dorsata included Acinetobacter indicus and Bacillus cereus with 100% identity to referenced bacteria from GenBank. Cell-free culture supernatants (CFCS) of B. cereus had a very strong antibacterial activity against N. gonorrhoeae in an in vitro antibacterial testing. Meanwhile, molecular docking revealed that antimicrobial lipopeptides from B. cereus (surfactin, fengycin, and iturin A) had a comparable value of binding-free energy (BFE) with the target protein receptor for N. gonorrhoeae, namely penicillin-binding protein (PBP) 1 and PBP2 when compared with the ceftriaxone, cefixime, and doxycycline. The molecular dynamics simulation (MDS) study revealed that the surfactin remains stable at the active site of PBP2 despite the alteration of the H-bond and hydrophobic interactions. According to this finding, surfactin has the greatest antibacterial potential against PBP2 of N. gonorrhoeae.

The extracellular vesicle generation paradox: a bacterial point of view

All bacteria produce secreted vesicles that carry out a variety of important biological functions. These extracellular vesicles can improve adaptation and survival by relieving bacterial stress and eliminating toxic compounds, as well as by facilitating membrane remodeling and ameliorating inhospitable environments. However, vesicle production comes with a price. It is energetically costly and, in the case of colonizing pathogens, it elicits host immune responses, which reduce bacterial viability. This raises an interesting paradox regarding why bacteria produce vesicles and begs the question as to whether the benefits of producing vesicles outweigh their costs. In this review, we discuss the various advantages and disadvantages associated with Gram-negative and Gram-positive bacterial vesicle production and offer perspective on the ultimate score. We also highlight questions needed to advance the field in determining the role for vesicles in bacterial survival, interkingdom communication, and virulence.

Antimicrobial activity and mode of action of 1,8-cineol against carbapenemase-producing Klebsiella pneumoniae

Antimicrobial resistance remains one of the most challenging issues that threatens the health of people around the world. Plant-derived natural compounds have received considerable attention for their potential role to mitigate antibiotic resistance. This study was carried out to assess the antimicrobial activity and mode of action of a monoterpene, 1,8-cineol (CN) against carbapenemase-producing Klebsiella pneumoniae (KPC-KP). Results showed that resazurin microplate assay and time-kill analysis revealed bactericidal effects of CN at 28.83 mg/mL. Zeta potential showed that CN increased the surface charge of bacteria and an increase of outer membrane permeability was also detected. CN was able to cause leakage of proteins and nucleic acids in KPC-KP cells upon exposure to CN and ethidium bromide influx/efflux experiment showed the uptake of ethidium bromide into the cell; this was attributed to membrane damage. CN was also found to induce oxidative stress in CN-treated KPC-KP cells through generation of reactive oxygen species which initiated lipid peroxidation and thus damaging the bacterial cell membrane. Scanning and transmission electron microscopies further confirmed the disruption of bacterial cell membrane and loss of intracellular materials. In this study, we demonstrated that CN induced oxidative stress and membrane damage resulting in KPC-KP cell death.

Unraveling the mechanism of octenidine and chlorhexidine on membranes: Does electrostatics matter?

The increasing problem of antibiotic resistance in bacteria requires the development of new antimicrobial candidates. There are several well-known substances with commercial use, but their molecular mode of action is not fully understood. In this work, we focus on two commonly used antimicrobial agents from the detergent family—octenidine dichloride (OCT) and chlorhexidine digluconate (CHX). Both of them are reported to be agents selectively attacking the cell membrane through interaction inducing membrane disruption by emulsification. They are believed to present electrostatic selectivity toward charged lipids. In this study, we tested this hypothesis and revised previously proposed molecular mechanisms of action. Employing a variety of techniques such as molecular dynamics, ζ potential with dynamic light scattering, vesicle fluctuation spectroscopy, carboxyfluorescein leakage measurement, and fluorescence trimethylammonium-diphenylhexatriene- and diphenylhexatriene-based studies for determination of OCT and CHX membrane location, we performed experimental studies using two model membrane systems—zwitterionic PC and negatively charged PG (18:1/18:1):PC (16:0/18:1) 3:7, respectively. These studies were extended by molecular dynamics simulations performed on a three-component bacterial membrane model system to further test interactions with another negatively charged lipid, cardiolipin. In summary, our study demonstrated that detergent selectivity is far more complicated than supposed simple electrostatic interactions. Although OCT does disrupt the membrane, our results suggest that its primary selectivity was more linked to mechanical properties of the membrane. On the other hand, CHX did not disrupt membranes as a primary activity, nor did it show any sign of electrostatic selectivity toward negatively charged membranes at any stage of interactions, which suggests membrane disruption by influencing more discrete membrane properties.

Reconstitution of Functional Integrin αIIbβ3 and Its Activation in Plasma Membrane-Mimetic Lipid Environments

The study of the platelet receptor integrin αIIbβ3 in a membrane-mimetic environment without interfering signalling pathways is crucial to understand protein structure and dynamics. Our understanding of this receptor and its sequential activation steps has been tremendously progressing using structural and reconstitution approaches in model membranes, such as liposomes or supported-lipid bilayers. For most αIIbβ3 reconstitution approaches, saturated short-chain lipids have been used, which is not reflecting the native platelet cell membrane composition. We report here on the reconstitution of label-free full-length αIIbβ3 in liposomes containing cholesterol, sphingomyelin, and unsaturated phosphatidylcholine mimicking the plasma membrane that formed supported-lipid bilayers for quartz-crystal microbalance with dissipation (QCM-D) experiments. We demonstrate the relevance of the lipid environment and its resulting physicochemical properties on integrin reconstitution efficiency and its conformational dynamics. We present here an approach to investigate αIIbβ3 in a biomimetic membrane system as a useful platform do dissect disease-relevant integrin mutations and effects on ligand binding in a lipid-specific context, which might be applicable for drug screening.

Surfactants - Compounds for inactivation of SARS-CoV-2 and other enveloped viruses

We provide here a general view on the interactions of surfactants with viruses, with a particular emphasis on how such interactions can be controlled and employed for inhibiting the infectivity of enveloped viruses, including coronaviruses. The aim is to provide to interested scientists from different fields, including chemistry, physics, biochemistry, and medicine, an overview of the basic properties of surfactants and (corona)viruses, which are relevant to understanding the interactions between the two. Various types of interactions between surfactant and virus are important, and they act on different components of a virus such as the lipid envelope, membrane (envelope) proteins and nucleocapsid proteins. Accordingly, this cannot be a detailed account of all relevant aspects but instead a summary that bridges between the different disciplines. We describe concepts and cover a selection of the relevant literature as an incentive for diving deeper into the relevant material. Our focus is on more recent developments around the COVID-19 pandemic caused by SARS-CoV-2, applications of surfactants against the virus, and on the potential future use of surfactants for pandemic relief. We also cover the most important aspects of the historical development of using surfactants in combatting virus infections. We conclude that surfactants are already playing very important roles in various directions of defence against viruses, either directly, as in disinfection, or as carrier components of drug delivery systems for prophylaxis or treatment. By designing tailor-made surfactants, and consequently, advanced formulations, one can expect more and more effective use of surfactants, either directly as antiviral compounds or as part of more complex formulations.

TAM mediates adaptation of carbapenem-resistant Klebsiella pneumoniae to antimicrobial stress during host colonization and infection

Gram-negative pathogens, such as Klebsiella pneumoniae, remodel their outer membrane (OM) in response to stress to maintain its integrity as an effective barrier and thus to promote their survival in the host. The emergence of carbapenem-resistant K. pneumoniae (CR-Kp) strains that are resistant to virtually all antibiotics is an increasing clinical problem and OM impermeability has limited development of antimicrobial agents because higher molecular weight antibiotics cannot access sites of activity. Here, we demonstrate that TAM (translocation and assembly module) deletion increases CR-Kp OM permeability under stress conditions and enhances sensitivity to high-molecular weight antimicrobials. SILAC-based proteomic analyses revealed mis-localization of membrane proteins in the TAM deficient strain. Stress-induced sensitization enhances clearance of TAM-deficient CR-Kp from the gut lumen following fecal microbiota transplantation and from infection sites following pulmonary or systemic infection. Our study suggests that TAM, as a regulator of OM permeability, represents a potential target for development of agents that enhance the effectiveness of existing antibiotics.

Tween 20 regulate the function and structure of transmembrane proteins of Bacillus cereus: Promoting transmembrane transport of fluoranthene

Polycyclic aromatic hydrocarbons (PAHs) are degraded by the highly efficient degrading bacterium Bacillus cereus. Transmembrane transport is highly important in PAH degradation by bacteria. Surfactants are the key substances that promote PAH adsorption, uptake and transmembrane transport by Bacillus cereus. In this study, the isobaric tags for relative and absolute quantitation (iTRAQ) approach was used for high-throughput screening of key functional proteins during transmembrane fluoranthene transport by Bacillus cereus treated with Tween 20. In addition, SWISS-MODEL was used to simulate the tertiary structures of key transmembrane proteins and analyze how Tween 20 promotes transmembrane transport. Transmembrane fluoranthene transport into Bacillus cereus requires transmembrane proteins and energy. Tween 20 was observed to improve bacterial motility and transmembrane protein expression. The interior of representative transmembrane proteins is mostly composed of hydrophobic β-sheets while amphipathic α-helices are primarily distributed at their periphery. The primary reason for this configuration may be α-helices promote the aggregation of surfactants and the phospholipid bilayer and the β-sheets promote surfactant insertion into the phospholipid bilayer to enhance PAH transport into Bacillus cereus. Investigating the effect of Tween 20 on Bacillus cereus transmembrane proteins during transmembrane fluoranthene transport is important for understanding the mechanism of PAH degradation by microorganisms.

Interaction of a dirhamnolipid biosurfactant with sarcoplasmic reticulum calcium ATPase (SERCA1a)

The interaction of a dirhamnolipid biosurfactant secreted by Pseudomonas aeruginosa with calcium ATPase from sarcoplasmic reticulum (SR) was studied by means of different approaches, such as enzyme activity, fluorescence spectroscopy, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and molecular docking simulations. The ATP hydrolysis activity was fully inhibited by incubation with dirhamnolipid (diRL) up to 0.1 mM concentration, corresponding to a surfactant concentration below membrane solubilization threshold. Surfactant-protein interaction induced conformational changes in the protein observed by an increase in the accessibility of tryptophan residues to the aqueous phase and by changes in the secondary structure of the protein as seen by fluorescence and FTIR spectroscopy. As a consequence, the protein become more unstable and denatured at lower temperatures, as seen by enzyme activity and DSC studies. Finally, these results were explained at molecular level throughout molecular docking simulations. It is concluded that there is a specific dirhamnolipid-protein interaction not related to the surface activity of the surfactant but to the particular physicochemical properties of the biosurfactant molecule.

Designing Decellularized Extracellular Matrix-Based Bioinks for 3D Bioprinting

3D bioprinting is an emerging technology to fabricate tissues and organs by precisely positioning cells into 3D structures using printable cell-laden formulations known as bioinks. Various bioinks are utilized in 3D bioprinting applications; however, developing the perfect bioink to fabricate constructs with biomimetic microenvironment and mechanical properties that are similar to native tissues is a challenging task. In recent years, decellularized extracellular matrix (dECM)-based bioinks have received an increasing attention in 3D bioprinting applications, since they are derived from native tissues and possess unique, complex tissue-specific biochemical properties. This review focuses on designing dECM-based bioinks for tissue and organ bioprinting, including commonly used decellularization and decellularized tissue characterization methods, bioink formulation and characterization, applications of dECM-based bioinks, and most recent advancements in dECM-based bioink design.

Impact of post-tanning chemicals on the pollution load of tannery wastewater

The leather industry uses a large amount of chemicals to transform a raw hide into finished leather. Chemicals are not fully taken up by leather and thus end up in tannery wastewater. Physicochemical and toxicological characterization of tannery effluents has been widely assessed. However, the characterization of processing chemicals and their relation to the pollution load of effluents remains unknown. Thus, this study aimed to assess a physicochemical and cytotoxic characterization of chemicals used in the leather post-tanning process and to evaluate the contribution of each chemical to the pollution load of raw wastewater. This study was performed using a leather post-tanning formulation applied by a large tannery located in Brazil. Deacidulation agents caused high conductivity and dissolved solids in wastewater. Retanning agents (natural and synthetic tannins) were responsible for the largest inorganic pollution load, and synthetic tannins were more toxic than natural ones. Fatliquoring agents released the highest chemical oxygen demand load in wastewater and they were the chemical group that presented the highest toxicity. Fixing agent and black dye provided inorganic pollution load to wastewater, and nitrogen pollution of wastewater was mainly related to the neutralizing retanner and the black dye.

Lipid Scrambling Induced by Membrane-Active Substances

The functional roles of the lipid asymmetry of biomembranes are attracting increasing attention. This study characterizes the activity of surfactants to induce transmembrane flip-flop of lipids and thus "scramble" this asymmetry. Detergent-induced lipid scrambling of liposomes mimicking the charge asymmetry of bacterial membranes with 20 mol % of 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-rac-glycerol in the outer leaflet only was quantified by ζ-potential measurements for octaethylene glycol dodecyl ether (C₁₂EO₈), octyl glucoside (OG), and dodecyl maltoside. Membrane leakage was separately measured by the fluorescence lifetime-based calcein leakage assay and the onset of the membrane-to-micelle transition by isothermal titration calorimetry. Partition coefficients and partial molar areas were obtained as well. For the quickly membrane-permeant C₁₂EO₈ and OG, leakage proceeds at a rather sharp threshold content in the membrane, which is well below the onset of solubilization and little dependent on incubation time; it is accompanied by fast lipid scrambling. However, unlike leakage, flip-flop is a relaxation process that speeds up gradually from taking weeks in the detergent-free membrane to minutes or less in the leaking membrane. Hence, after 24 h of incubation, 10 mol % of C₁₂EO₈ or 50 mol % of OG in the membrane suffice for virtually complete lipid scrambling, whereas leakage remains below 10% for up to 14 mol % of C₁₂EO₈ and 88 mol % of OG. There is thus a concentration window in which lipid scrambling proceeds without leakage. This implies that lipid scrambling must be considered a possible mode of action of antimicrobial peptides and other membrane-active drugs or biomolecules. A related, detergent-based protocol for scrambling the lipid asymmetry of liposomes and maybe cells without compromising their overall integrity would be a very valuable tool to study functions of lipid asymmetry.

In vitro oxidations of low-density lipoprotein and RAW 264.7 cells with lipophilic O(3P)-precursors

A beneficial property of photogenerated reactive oxygen species (ROS) is the capability of oxidant generation within a specific location or organelle inside a cell. Dibenzothiophene S-oxide (DBTO), which is known to undergo a photodeoxygenation reaction to generate ground state atomic oxygen [O(³P)] upon irradiation, was functionalized to afford localization within the plasma membrane of cells. The photochemistry, as it relates to oxidant generation, was studied and demonstrated that the functionalized DBTO derivatives generated O(³P). Irradiation of these lipophilic O(³P)-precursors in the presence of LDL and within RAW 264.7 cells afforded several oxidized lipid products (oxLP) in the form of aldehydes. The generation of a 2-hexadecenal (2-HDEA) was markedly increased in irradiations where O(³P) was putatively produced. The substantial generation of 2-HDEA is not known to accompany the production of other ROS. These cellular irradiation experiments demonstrate the potential of inducing oxidation with O(³P) in cells.