Phylogeny of Populus-Salix (Salicaceae) and their relative genera using molecular datasets

Phylogenetic insights into the Salicaceae: The evolution of willows and beyond

The Salicaceae includes approximately 54 genera and over 1,400 species with a cosmopolitan distribution. Members of the family are well-known for their diverse secondary plant metabolites, and they play crucial roles in tropical and temperate forest ecosystems. Phylogenetic reconstruction of the Salicaceae has been historically challenging due to the limitations of molecular markers and the extensive history of hybridization and polyploidy within the family. Our study employs whole-genome sequencing of 74 species to generate an extensive phylogeny of the Salicaceae. We generated two RAD-Seq enriched whole-genome sequence datasets and extracted two additional gene sets corresponding to the universal Angiosperms353 and Salicaceae-specific targeted-capture arrays. We reconstructed maximum likelihood-based molecular phylogenies using supermatrix and coalescent-based supertree approaches. Our fossil-calibrated phylogeny estimates that the Salicaceae originated around 128 million years ago and unravels the complex taxonomic relationships within the family. Our findings confirm the non-monophyly of the subgenus Salix s.l. and further support the merging of subgenera Chamaetia and Vetrix, both of which exhibit intricate patterns within and among different sections. Overall, our study not only enhances our understanding of the evolution of the Salicaceae, but also provides valuable insights into the complex relationships within the family.

Phylogenomics reveals patterns of ancient hybridization and differential diversification that contribute to phylogenetic conflict in willows, poplars, and close relatives

Despite the economic, ecological, and scientific importance of the genera Salix L. (willows) and Populus L. (poplars, cottonwoods, and aspens) Salicaceae, we know little about the sources of differences in species diversity between the genera and of the phylogenetic conflict that often confounds estimating phylogenetic trees. Salix subgenera and sections, in particular, have been difficult to classify, with one recent attempt termed a "spectacular failure" due to a speculated radiation of the subgenera Vetrix and Chamaetia. Here, we use targeted sequence capture to understand the evolutionary history of this portion of the Salicaceae plant family. Our phylogenetic hypothesis was based on 787 gene regions and identified extensive phylogenetic conflict among genes. Our analysis supported some previously described subgeneric relationships and confirmed the polyphyly of others. Using an fbranch analysis, we identified several cases of hybridization in deep branches of the phylogeny, which likely contributed to discordance among gene trees. In addition, we identified a rapid increase in diversification rate near the origination of the Vetrix-Chamaetia clade in Salix. This region of the tree coincided with several nodes that lacked strong statistical support, indicating a possible increase in incomplete lineage sorting due to rapid diversification. The extraordinary level of both recent and ancient hybridization in both Salix and Populus have played important roles in the diversification and diversity in these two genera.

Host evolutionary relationships explain tree mortality caused by a generalist pest-pathogen complex

The phylogenetic signal of transmissibility (competence) and attack severity among hosts of generalist pests is poorly understood. In this study, we examined the phylogenetic effects on hosts differentially affected by an emergent generalist beetle-pathogen complex in California and South Africa. Host types (non-competent, competent and killed-competent) are based on nested types of outcomes of interactions between host plants, the beetles and the fungal pathogens. Phylogenetic dispersion analysis of each host type revealed that the phylogenetic preferences of beetle attack and fungal growth were a nonrandom subset of all available tree and shrub species. Competent hosts were phylogenetically narrower by 62 Myr than the set of all potential hosts, and those with devastating impacts were the most constrained by 107 Myr. Our results show a strong phylogenetic signal in the relative effects of a generalist pest-pathogen complex on host species, demonstrating that the strength of multi-host pest impacts in plants can be predicted by host evolutionary relationships. This study presents a unifying theoretical approach to identifying likely disease outcomes across multiple host-pest combinations.

The Evolutionary History, Diversity, and Ecology of Willows (Salix L.) in the European Alps

The genus Salix (willows), with 33 species, represents the most diverse genus of woody plants in the European Alps. Many species dominate subalpine and alpine types of vegetation. Despite a long history of research on willows, the evolutionary and ecological factors for this species richness are poorly known. Here we will review recent progress in research on phylogenetic relationships, evolution, ecology, and speciation in alpine willows. Phylogenomic reconstructions suggest multiple colonization of the Alps, probably from the late Miocene onward, and reject hypotheses of a single radiation. Relatives occur in the Arctic and in temperate Eurasia. Most species are widespread in the European mountain systems or in the European lowlands. Within the Alps, species differ ecologically according to different elevational zones and habitat preferences. Homoploid hybridization is a frequent process in willows and happens mostly after climatic fluctuations and secondary contact. Breakdown of the ecological crossing barriers of species is followed by introgressive hybridization. Polyploidy is an important speciation mechanism, as 40% of species are polyploid, including the four endemic species of the Alps. Phylogenomic data suggest an allopolyploid origin for all taxa analyzed so far. Further studies are needed to specifically analyze biogeographical history, character evolution, and genome evolution of polyploids.

Complete plastome sequence of Xylosma longifolia Clos. (Salicaceae)

Xylosma longifolia is a tree species within Salicaceae and is distributed in Guizhou, Yunnan, Fujian, Guangxi, Guangdong, and Hainan provinces of China as well as in Vietnam, Laos, and India. There are no studies utilizing the complete plastome of Xylosma longifolia in the current literature. Therefore, this report provides a reference for the plastid gene sequence of Xylosma longifolia, and it contributes to the phylogenetic placement and species identification. In this report, we described the complete plastome sequence of Xylosma longifolia. The complete plastome length of Xylosma longifolia is 156,938 bp and has the typical quadripartite structure and gene content of angiosperms, including two inverted repeat (IR) regions of 27,514 bp, a large single-copy (LSC) region of 85,221 bp and a small single-copy (SSC) region of 16,689 bp. The plastome contains 130 genes, including 86 protein coding genes, 36 tRNA genes, eight rRNA genes (5S rRNA, 4.5S rRNA, 16S rRNA, and 23S rRNA). The GC content of the plastome is 36.8%. The complete plastome sequence will be a valuable resource for studies involving the phylogenetic inference of Salicaceae.

Divergence of 3' ends as a driver of short interspersed nuclear element (SINE) evolution in the Salicaceae

Short interspersed nuclear elements (SINEs) are small, non-autonomous and heterogeneous retrotransposons that are widespread in plants. To explore the amplification dynamics and evolutionary history of SINE populations in representative deciduous tree species, we analyzed the genomes of the six following Salicaceae species: Populus deltoides, Populus euphratica, Populus tremula, Populus tremuloides, Populus trichocarpa, and Salix purpurea. We identified 11 Salicaceae SINE families (SaliS-I to SaliS-XI), comprising 27 077 full-length copies. Most of these families harbor segmental similarities, providing evidence for SINE emergence by reshuffling or heterodimerization. We observed two SINE groups, differing in phylogenetic distribution pattern, similarity and 3' end structure. These groups probably emerged during the 'salicoid duplication' (~65 million years ago) in the Salix-Populus progenitor and during the separation of the genus Salix (45-65 million years ago), respectively. In contrast to conserved 5' start motifs across species and SINE families, the 3' ends are highly variable in sequence and length. This extraordinary 3'-end variability results from mutations in the poly(A) tail, which were fixed by subsequent amplificational bursts. We show that the dissemination of newly evolved 3' ends is accomplished by a displacement of older motifs, leading to various 3'-end subpopulations within the SaliS families.

Analyzing the phylogeny of poplars based on molecular data

Methods for constructing trees using DNA sequences, known as molecular phylogenetics, have been applied to analyses of phylogenetic origin, evolutionary relatedness and taxonomic classification. Combining data sequenced in this study and downloaded from GenBank, we sampled 112 (chloroplast data) / 122 (ITS data) specimens belonging to 49 (chloroplast data) / 46 (ITS data) poplar species or hybrids from six (chloroplast data) / five sections (ITS data). Maximum parsimony and Bayesian inference were used to analyze phylogenetic relationships within the genus Populus based on eight chloroplast combinations and ITS regions. The results suggested that Bayesian inference might be more suitable for the phylogenetic reconstruction of Populus. All Populus species could be divided into two clades: clade 1, including subclades 1 and 2, and clade 2, including subclades 3 and 4. Species within clade 1, involving five sections except for Leuce, clustered coinciding with their two specific main geographical distribution areas: China (subclade 1) and North America (subclade 2). Clustering in subclade 3, section Leuce was confirmed to be of monophyletic origin and independent evolution. Its two subsections, namely Albidae and Trepidae, could be separated by chloroplast data but had frequent gene flow based on ITS data. Phylogeny analysis based on chloroplast data demonstrated once more that section Aigeiros was paraphyletic and further showed that the P. deltoides lineage is restricted in subclade 2 and that P. nigra lineage, located in subclade 3, originated from a hybrid of which an Albidae ancestor species was the material parent. Similarly, section Tacamahaca was found to be paraphyletic and had two lineages: a clade 1 lineage, such as P. cathayana, and a clade 2 lineage, such as P. simonii. Section Leucoides was paraphyletic and closely linked to section Tacamahaca. Their section boundaries were not conclusively delimitated by sequencing information.

Development, structure and evolutionary significance of seed appendages in Salix matsudana (Salicaceae)

The seeds of Salix and Populus (Salicaceae) are characterized by having numerous long hairs which loosely accompanying the seeds and a small annular appendage which surrounding the base of the seed along with tufted hairs. In this study, the complete development and detailed structure of the hairs and annular appendage in Salix matsudana were investigated using standard techniques for plant anatomy and histochemistry. The results show that the hairs originate successively from the single epidermal cells of the placenta (in megaspore mother cell phase) and funiculus (in eight-nucleate phase), and that their development consists of a progressive increase in cell size and an absence of cell division. The annular appendage is initiated from four to five rows of cells at the distal end of the funiculus in octant proembryo phase and its development is characterized by reactivated meristematic activity and a size increase of these cells. The initiation and development of the hairs are irrelevant to ovule development but fertilization and a developed embryo is necessary for the annular appendage to occur. Considering the reliable fossils, we inferred that the feature of seeds surrounded by long hairs is an ancestral character, and that the detachment of hairs from the funiculus and the occurrence of an annular appendage with tufts of hairs may be the more derived states for seed dispersal in Salix and Populus.

RAD sequencing resolved phylogenetic relationships in European shrub willows (Salix L. subg. Chamaetia and subg. Vetrix) and revealed multiple evolution of dwarf shrubs

The large and diverse genus Salix L. is of particular interest for decades of biological research. However, despite the morphological plasticity, the reconstruction of phylogenetic relationships was so far hampered by the lack of informative molecular markers. Infrageneric classification based on morphology separates dwarf shrubs (subg. Chamaetia) and taller shrubs (subg. Vetrix), while previous phylogenetic studies placed species of these two subgenera just in one largely unresolved clade. Here we want to test the utility of genomic RAD sequencing markers for resolving relationships at different levels of divergence in Salix. Based on a sampling of 15 European species representing 13 sections of the two subgenera, we used five different RAD sequencing datasets generated by ipyrad to conduct phylogenetic analyses. Additionally we reconstructed the evolution of growth form and analyzed the genetic composition of the whole clade. The results showed fully resolved trees in both ML and BI analysis with high statistical support. The two subgenera Chamaetia and Vetrix were recognized as nonmonophyletic, which suggests that they should be merged. Within the Vetrix/Chamaetia clade, a division into three major subclades could be observed. All species were confirmed to be monophyletic. Based on our data, arctic-alpine dwarf shrubs evolved four times independently. The structure analysis showed five mainly uniform genetic clusters which are congruent in sister relationships observed in the phylogenies. Our study confirmed RAD sequencing as a useful genomic tool for the reconstruction of relationships on different taxonomic levels in the genus Salix.

The complete chloroplast genome sequence of Populus wilsonii and its phylogenetic analysis

The complete chloroplast genome of Populus wilsonii was reconstructed by reference-based assembly using whole-genome sequencing data. The total chloroplast genome size of P. wilsonii was 158,080 bp in length, including a pair of inverted repeat regions (IRs) of 27,749 bp each, a large single-copy region (LSC) of 85,949 bp and a small single-copy region (SSC) of 16,633 bp. A total of 133 genes were predicted from the chloroplast genome, including 86 protein-coding genes, 39 tRNA genes and eight rRNA genes. Among these genes, 20 genes occurred in IRs, containing nine protein-coding genes, seven tRNA genes and four rRNA genes. The GC content of P. wilsonii chloroplast genome was 36.6%. The phylogenetic analysis with 15 other species showed that P. wilsonii was closely clustered with Populus cathayana. The complete chloroplast genome of P. wilsonii provides new insights into Populus evolutionary and genomic studies.