Relative efficiency of zinc sulfide (ZnS) quantum dots (QDs) based electrochemical and fluorescence immunoassay for the detection of Staphylococcal enterotoxin B (SEB)

A comprehensive review on the detection of Staphylococcus aureus enterotoxins in food samples

Staphylococcal enterotoxins (SEs), the major virulence factors of Staphylococcus aureus, cause a wide range of food poisoning and seriously threaten human health by infiltrating the food supply chain at different phases of manufacture, processes, distribution, and market. The significant prevalence of Staphylococcus aureus calls for efficient, fast, and sensitive methods for the early detection of SEs. Here, we provide a comprehensive review of the hazards of SEs in contaminated food, the characteristic and worldwide regulations of SEs, and various detection methods for SEs with extensive comparison and discussion of benefits and drawbacks, mainly including biological detection, genetic detection, and mass spectrometry detection and biosensors. We highlight the biosensors for the screening purpose of SEs, which are classified according to different recognition elements such as antibodies, aptamers, molecularly imprinted polymers, T-cell receptors, and transducers such as optical, electrochemical, and piezoelectric biosensors. We analyzed challenges of biosensors for the monitoring of SEs and conclude the trends for the development of novel biosensors should pay attention to improve samples pretreatment efficiency, employ innovative nanomaterials, and develop portable instruments. This review provides new information and insightful commentary, important to the development and innovation of further detection methods for SEs in food samples.

Recent Applications of Quantum Dots in Pharmaceutical Analysis

Nanotechnology has emerged as one of the most potential areas for pharmaceutical analysis. The need for nanomaterials in pharmaceutical analysis is comprehended in terms of economic challenges, health and safety concerns. Quantum dots (QDs)or colloidal semiconductor nanocrystals are new groups of fluorescent nanoparticles that bind nanotechnology to drug analysis. Because of their special physicochemical characteristics and small size, QDs are thought to be promising candidates for the electrical and luminescent probes development. They were originally developed as luminescent biological labels, but are now discovering new analytical chemistry applications, where their photo-luminescent properties are used in pharmaceutical, clinical analysis, food quality control and environmental monitoring. In this review, we discuss QDs regarding properties and advantages, advances in methods of synthesis and their recent applications in drug analysis in the recent last years.

SERS immuno- and apta-assays in biosensing/bio-detection: Performance comparison, clinical applications, challenges

Surface Enhanced Raman Spectroscopy is increasingly used as a sensitive bioanalytical tool for detection of variety of analytes ranging from viruses and bacteria to cancer biomarkers and toxins, etc. This comprehensive review describes principles of operation and compares the performance of immunoassays and aptamer assays with Surface Enhanced Raman scattering (SERS) detection to each other and to some other bioassay methods, including ELISA and fluorescence assays. Both immuno- and aptamer-based assays are categorized into assay on solid substrates, assays with magnetic nanoparticles and assays in laminar flow or/and strip assays. The best performing and recent examples of assays in each category are described in the text and illustrated in the figures. The average performance, particularly, limit of detection (LOD) for each of those methods reflected in 9 tables of the manuscript and average LODs are calculated and compared. We found out that, on average, there is some advantage in terms of LOD for SERS immunoassays (0.5 pM median LOD of 88 papers) vs SERS aptamer-based assays (1.7 pM median LOD of 51 papers). We also tabulated and analyzed the clinical performance of SERS immune and aptamer assays, where selectivity, specificity, and accuracy are reported, we summarized the best examples. We also reviewed challenges to SERS bioassay performance and real-life application, including non-specific protein binding, nanoparticle aggregation, limited nanotag stability, sometimes, relatively long time to results, etc. The proposed solutions to those challenges are also discussed in the review. Overall, this review may be interesting not only to bioanalytical chemist, but to medical and life science researchers who are interested in improvement of bioanalyte detection and diagnostics.

Reagentless detection of staphylococcal enterotoxin B via electrochemical interrogation of conformational changes

An electrochemical biosensor for staphylococcal enterotoxin B (SEB) detection has been designed on the basis of electrochemical interrogation of conformational changes. Ferrocene-labeled hairpin probe (Fc-HP) and SEB aptamer are introduced for the construction of the platform. Without SEB, the rigid construction of DNA duplex that included SEB aptamer and Fc-HP prevented Fc getting access to the electrode surface, keeping the "eT-off" state in the detection system. In the presence of SEB, the interaction between SEB and the aptamer could trigger the disruption of DNA duplex and the restoration of hairpin structure, accompanied by the increase of Fc oxidation current. The decreasing distance between the redox probe and electrode upon the nucleic acid reconfiguration substantially increased the efficiency of eT, which resulted in the enhanced Fc signal. The proposed strategy presented a wide linear detection range from 0.005 to 100 ng mL^-1 with a detection limit down to 3 pg mL^-1 (S/N = 3). To investigate the applicability and reliability of the method in real food samples such as milk samples, we compared the results between this method and the commercial ELISA kit. The relative percentage error between the two assays ranged from -6.42% to 6.31%, indicating that there was no obvious difference between the results.

Thiolated Nanoparticles for Biomedical Applications: Mimicking the Workhorses of Our Body

Advances in nanotechnology have generated a broad range of nanoparticles (NPs) for numerous biomedical applications. Among the various properties of NPs are functionalities being related to thiol substructures. Numerous biological processes that are mediated by cysteine or cystine subunits of proteins representing the workhorses of the bodies can be transferred to NPs. This review focuses on the interface between thiol chemistry and NPs. Pros and cons of different techniques for thiolation of NPs are discussed. Furthermore, the various functionalities gained by thiolation are highlighted. These include overall bio- and mucoadhesive, cellular uptake enhancing, and permeation enhancing properties. Drugs being either covalently attached to thiolated NPs via disulfide bonds or being entrapped in thiolated polymeric NPs that are stabilized via inter- and intrachain crosslinking can be released at the diseased tissue or in target cells under reducing conditions. Moreover, drugs, targeting ligands, biological analytes, and enzymes bearing thiol substructures can be immobilized on noble metal NPs and quantum dots for therapeutic, theranostic, diagnostic, biosensing, and analytical reasons. Within this review a concise summary and analysis of the current knowledge, future directions, and potential clinical use of thiolated NPs are provided.

Femtomolar determination of an ovarian cancer biomarker (miR-200a) in blood plasma using a label free electrochemical biosensor based on L-cysteine functionalized ZnS quantum dots

In the present study, a label-free electrochemical genosensor was designed based on ZnS quantum dots functionalized with l-cysteine (Cys-ZnS-QDs) to detect miR-200a, as a special ovarian cancer biomarker. The Cys-ZnS-QD genosensor was characterized by transmission electron microscopy (TEM), UV-Vis absorption and fluorescence methods. Cys-ZnS-QDs are electrodeposited on the glassy carbon electrode surface and act as a suitable substrate for immobilization of the DNA probe. The effective parameters in the preparation of the genosensor are optimized to improve its analytical performance. The analytical performance of the genosensor has been investigated using electrochemical impedance spectroscopy. Under optimal conditions, the linear range and the detection limit of miR-200a were found to be 1.0 × 10-14 to 1.0 × 10-6 M and 8.4 fM. In addition, the genosensor is used to detect the target complementary miRNA strand from a single-base mismatch miRNA strand. Finally, this label-free electrochemical biosensor was used to detect miR-200a in human plasma without using any amplification method.

A Group of Complexes Based on PAMAM and Quantum Dots Used in Clinical Immunoassays

We report a group of complexes used in clinical immunoassays. The complexes include a PAMAM-conjugated goat anti-rabbit IgG and a QDs-conjugated goat anti-mouse IgG. When rabbit anti-antigen and mouse anti-antigen are added, the corresponding antigen will be detected. The experiment, using the complexes, is simple, convenient, short in time, and short in steps. It is also applicable to different experiment methods, like to be used with FCM (flow cytometry), ICC (immunocytochemistry), and IHC (immunohistochemistry) to detect many kinds of antigens.

The adverse role of excess negative ions in reducing the photoluminescence from water soluble MAA-CdSe/ZnS quantum dots in various phosphate buffers

The use of CdSe/ZnS quantum dots in making biosensors or biomarkers requires them to be water soluble, which can be achieved by conjugating with MAA. We report observation of modulation in the photoluminescence intensities of MAA conjugated CdSe/ZnS QDs (MAA-QDs) that depended strongly on the types and quantity of negative ions present in various kinds of phosphate buffers. The deterioration of PL was attributed to the presence of excess ions in the media that altered the energy and occupation of HOMO and LUMO levels of MAA. Instantaneously, strong reduction in the PL intensity with pH was observed. MAA-QDs incubated for more than 24 hours in the phosphate buffer at pH ∼ 7.0-8.0 showed recovery and enhanced PL intensity, which was attributed to the presence of excess positive ions and a small amount of OH-. Saline buffers showed no significant recovery due to the presence of additional Cl- ions. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements were successfully employed to determine the band edges of the MAA-QD system in the presence of excess positive or negative ions (Na+, H+, Cl-, and OH-) in the media. Thus, it is very important to have complete knowledge of the ions present in the buffer when using MAA-QDs for biomarking or biosensing applications.

Sensors Based on Bio and Biomimetic Receptors in Medical Diagnostic, Environment, and Food Analysis

Analytical chemistry is now developing mainly in two areas: automation and the creation of complexes that allow, on the one hand, for simultaneously analyzing a large number of samples without the participation of an operator, and on the other, the development of portable miniature devices for personalized medicine and the monitoring of a human habitat. The sensor devices, the great majority of which are biosensors and chemical sensors, perform the role of the latter. That last line is considered in the proposed review. Attention is paid to transducers, receptors, techniques of immobilization of the receptor layer on the transducer surface, processes of signal generation and detection, and methods for increasing sensitivity and accuracy. The features of sensors based on synthetic receptors and additional components (aptamers, molecular imprinted polymers, biomimetics) are discussed. Examples of bio- and chemical sensors' application are given. Miniaturization paths, new power supply means, and wearable and printed sensors are described. Progress in this area opens a revolutionary era in the development of methods of on-site and in-situ monitoring, that is, paving the way from the "test-tube to the smartphone".

The Current Status and Future Outlook of Quantum Dot-Based Biosensors for Plant Virus Detection

Enzyme-linked immunosorbent assay (ELISA) and polymerase chain reaction (PCR), widely used for the detection of plant viruses, are not easily performed, resulting in a demand for an innovative and more efficient diagnostic method. This paper summarizes the characteristics and research trends of biosensors focusing on the physicochemical properties of both interface elements and bioconjugates. In particular, the topological and photophysical properties of quantum dots (QDs) are discussed, along with QD-based biosensors and their practical applications. The QD-based Fluorescence Resonance Energy Transfer (FRET) genosensor, most widely used in the biomolecule detection fields, and QD-based nanosensor for Rev-RRE interaction assay are presented as examples. In recent years, QD-based biosensors have emerged as a new class of sensor and are expected to open opportunities in plant virus detection, but as yet there have been very few practical applications (Table 3). In this article, the details of those cases and their significance for the future of plant virus detection will be discussed.

Rapid detection of staphylococcal enterotoxin B in milk samples based on fluorescence hybridization chain reaction amplification

A rapid, simple, and sensitive method has been developed to detect staphylococcal enterotoxin B (SEB). To establish the hybridization chain reaction-based aptasensor, we described the new probes of two hairpins (H1 and H2), which were first designed based on the partial complementary sequence of the SEB aptamer (cDNA). The H1 labeled with a fluorophore and a quencher can act as a molecular fluorescence “switch”. Hence, in the presence of SEB, the aptamer binds SEB, while the unbound cDNA triggers HCR to carry out the cyclic hybridization of H1 and H2 so as to turn “ON” the fluorescence through forming long nicked DNA. By using this new strategy, SEB can be sensitively detected within the range of 3.13 ng mL⁻¹ to 100 ng mL⁻¹ with a detection limit of 0.33 ng mL⁻¹ (S/N = 3). Furthermore, the developed method could facilitate the detection of SEB effectively in milk samples.

A new competitive aptasensor combined with HCR was developed for SEB detection.

Microbead QD-ELISA: Microbead ELISA Using Biocatalytic Formation of Quantum Dots for Ultra High Sensitive Optical and Electrochemical Detection

Electrochemical detection strategies employing semiconductor quantum dots (QDs) open up new opportunities for highly sensitive detection of biological targets. We designed a new assay based on microbead linked enzymatic generation of CdS QDs (Microbead QD-ELISA) and employed it in optical and electrochemical affinity assays for the cancer biomarker superoxide dismutase 2 (SOD2). Biotinylated antibodies against SOD2 were immobilized on the surface of polyvinyl chloride microbeads bearing streptavidin. In order to prevent any non-specific adsorption the microbeads were further blocked with bovine serum albumin. The analyte, SOD2 was captured on microbeads and labeled with alkaline phosphatase-conjugated antibody linked with mouse antibody against SOD2. Hydrolysis of para-nitrophenylphosphate by immobilized alkaline phosphatase triggered the rapid formation of phosphate-stabilized CdS QDs on the surface of microbeads. The resulting semiconductor nanoparticles were detected by fluorescence spectroscopy, microscopy, and square-wave voltammetry (SWV). The electrochemical assay based on the detection with square-wave voltammograms of Cd²⁺ ions originating from immobilized CdS QDs showed linearity up to 45 ng mL^-1, and the limit of SOD2 detection equal to 0.44 ng mL^-1 (1.96 × 10^-11 M). This detection limit is lower by 2 orders of magnitude in comparison with that of other previously published assays for superoxide dismutase. The electrochemical assay was validated with HepG2 (Human hepatocellular carcinoma) cell lysate containing SOD2.

Enzyme free detection of staphylococcal enterotoxin B (SEB) using ferrocene carboxylic acid labeled monoclonal antibodies: an electrochemical approach

We report a ferrocene based electrochemical immunosensor for staphylococcal enterotoxin B.