The effect of a new wound dressing on wound healing: Biochemical and histopathological evaluation

Bilayer hydrogel with a protective film and a regenerative hydrogel for effective diabetic wound treatment

Diabetic foot ulcers (DFUs) are one of the most serious complications of diabetes, often leading to necrosis and amputation. DFU is caused by the intricate diabetic microenvironment, including ischemia, hypoxia, hyperinflammation, reduced angiogenesis, and persistent infection. Traditional wound dressings made of single or mixed materials often struggle to meet all the requirements for effective diabetic wound healing. In contrast, multilayer dressings comprising more than single layers have the potential to address these challenges by combining their diverse chemical and physical properties. In this study, we developed a bilayer hydrogel comprising a GelMA-ALG-nano-ZnO protective film and a COL1-PRP regenerative hydrogel for facilitating diabetic wound healing. We demonstrated the protective properties against bacterial infection of the protective film, while highlighting the regenerative potential of the COL1-PRP hydrogel in promoting fibroblast and MUVEC migration, extracellular matrix secretion and deposition, and angiogenesis. Importantly, the bilayer hydrogel exhibited superior efficacy in promoting full-thickness wound healing in a diabetic rat model compared to its single-layer hydrogel counterparts. This multi-layer approach offers a promising strategy for addressing the complexities of diabetic foot treatment and improving clinical outcomes.

Silk fibroin biohydrogel composites for loading and ordered release of multiple active ingredients with enhanced bioactivity

Bioactive hydrogels are currently receiving significant attention. In this study, silk fibroin tyramine-modified gelatin hydrogels (SF-TG) with varying degrees of tyramine root substitution were explored. The physicochemical property and biocompatibility of low degree of substitution tyramine-modified gelatin hydrogel (SF-LTG) and high degree of substitution tyramine-modified gelatin hydrogel (SF-HTG) were compared. The results showed that SF-LTG possessed better mechanical property and higher biocompatibility. Thus, SF-LTG was selected as a bioactive matrix and loaded with basic fibroblast growth factor (bFGF); subsequently, curcumin-coupled chitosan rods (CCCRs-EGF) enriched with epidermal growth factor (EGF) were added to obtain SF-LTG-bFGF@CCCRs-EGF hydrogels. The results showed that SF-LTG-bFGF@CCCRs-EGF retained the basic structural and mechanical properties of the SF-LTG matrix gel material and underwent multiple loading and orderly release with different activities while displaying antioxidant, anti-inflammatory, antimicrobial, and pro-cellular proliferation activities and orderly regulation of activity during wound healing. Therefore, the SF-LTG-bFGF@CCCRs-EGF hydrogel is of great value in healing complex wounds.

Nanomaterial strategies in wound healing: A comprehensive review of nanoparticles, nanofibres and nanosheets

Wound healing is a complex process that orchestrates the coordinated action of various cells, cytokines and growth factors. Nanotechnology offers exciting new possibilities for enhancing the healing process by providing novel materials and approaches to deliver bioactive molecules to the wound site. This article elucidates recent advancements in utilizing nanoparticles, nanofibres and nanosheets for wound healing. It comprehensively discusses the advantages and limitations of each of these materials, as well as their potential applications in various types of wounds. Each of these materials, despite sharing common properties, can exhibit distinct practical characteristics that render them particularly valuable for healing various types of wounds. In this review, our primary focus is to provide a comprehensive overview of the current state-of-the-art in applying nanoparticles, nanofibres, nanosheets and their combinations to wound healing, serving as a valuable resource to guide researchers in their appropriate utilization of these nanomaterials in wound-healing research. Further studies are necessary to gain insight into the application of this type of nanomaterials in clinical settings.

Enhanced wound healing potential of arabincoside B isolated from Caralluma Arabica in rat model; a possible dressing in veterinary practice

BACKGROUND

Wound management is a critical procedure in veterinary practice. A wound is an injury that requires the body's cells' alignment to break down due to external assault, such as trauma, burns, accidents, and diseases. Re-epithelization, extracellular matrix deposition, especially collagen, inflammatory cell infiltration, and development of new blood capillaries are the four features that are used to evaluate the healing process. Using a natural extract for wound management is preferred to avoid the side effects of synthetic drugs. The current study aimed to assess the effect of major pregnane glycoside arabincoside B (AR-B) isolated from Caralluma arabica (C. arabica) for the wound healing process.

METHOD

AR-B was loaded on a gel for wound application. Rats were randomly distributed into six groups: normal, positive control (PC), MEBO®, AR-B 0.5%, AR-B 1%, and AR-B 1.5%, to be 6 animals in each group. Wounds were initiated under anesthesia with a 1 cm diameter tissue needle, and treatments were applied daily for 14 days. The collected samples were tested for SOD, NO, and MDA. Gene expression of VEGF and Caspase-3. Histopathological evaluation was performed at two-time intervals (7 and 14 days), and immunohistochemistry was done to evaluate α -SMA, TGF-β, and TNF-α.

RESULT

It was found that AR-B treatment enhanced the wound healing process. AR-B treated groups showed reduced MDA and NO in tissue, and SOD activity was increased. Re-epithelization and extracellular matrix deposition were significantly improved, which was confirmed by the increase in TGF-β and α -SMA as well as increased collagen deposition. TNF-α was reduced, which indicated the subsiding of inflammation. VEGF and Caspase-3 expression were reduced.

CONCLUSION

Our findings confirmed the efficiency of AR-B in enhancing the process of wound healing and its potential use as a topical wound dressing in veterinary practice.

Dual Functional Antibacterial-Antioxidant Core/Shell Alginate/Poly(ε-caprolactone) Nanofiber Membrane: A Potential Wound Dressing

Core/shell nanofibers offer the advantage of encapsulating multiple drugs with different hydrophilicity in the core and shell, thus allowing for the controlled release of pharmaceutic agents. Specifically, the burst release of hydrophilic drugs from such fiber membranes causes an instantaneous high drug concentration, whereas a long and steady release is usually desired. Herein, we tackle the problem of the initial burst release by the generation of core/shell nanofibers with the hydrophilic antibiotic drug gentamycin loaded within a hydrophilic alginate core surrounded by a hydrophobic shell of poly(ε-caprolactone). Emulsion electrospinning was used as the nanofibrous mesh generation procedure. This process also allows for the loading of a hydrophobic compound, where we selected a natural antioxidant molecule, betulin (BTL), to detoxify the radicals. The resulting nanofibers exhibited a cylindrical shape with a core/shell structure. In vitro tests showed a controlled release of gentamicin from nanofibers via diffusion. The drug reached 93% release in an alginate hydrogel film but only 50% release in the nanofibers, suggesting its potential to minimize the initial burst release. Antibacterial tests revealed significant activity against both Gram-negative and Gram-positive bacteria. The antioxidant property of betulin was confirmed through the DPPH assay, where the incorporation of 20% BTL revealed 37.3% DPPH scavenging. The nanofibers also exhibited favorable biocompatibility in cell culture studies, and no harmful effects on cell viability were observed. Overall, this research offers a promising approach to producing core/shell nanofibrous mats with antibacterial and antioxidant properties, which could effectively address the requirements of wound dressings, including infection prevention and wound healing acceleration.

Development strategy of novel drug formulations for the delivery of doxycycline in the treatment of wounds of various etiologies

Doxycycline hyclate (DOXH) is a broad-spectrum antibiotic derived synthetically from tetracycline. Despite its use in clinical practice for more than 40 years, DOXH remains an effective antibiotic with retained activity. The potential advantages of DOXH for wound healing therapy include its mechanisms of action, such as anti-inflammatory effects, antioxidant properties, modulation of cellular processes, stimulation of collagen synthesis, and antimicrobial activity. As current standards of care aim to improve wound healing by promoting rapid closure, a relevant direction is the development of novel DOXH formulations for parenteral delivery that enhance both skin regeneration and control of infectious conditions. Oral delivery is the most common and commercially available route for administering DOXH therapeutic agents. However, parenteral delivery of DOXH, where the antibiotic substance is not in a solid state (as in powdered or compressed solid form) but rather dissolved in any carrier, presents challenges regarding DOX solubility and the stability of DOXH solutions, which are major factors complicating the development of new formulations for parenteral administration. This review discusses the achievements in research strategies and the development of new pharmaceutical formulations for the delivery of doxycycline in the treatment of wounds of various etiologies.

Current Trends on Innovative Technologies in Topical Wound Care for Advanced Healing and Management

OBJECTIVES

To investigate critically traditional and modern techniques for cutaneous wound healing and to provide comprehensive information on these novel techniques to encounter the challenges with the existing wound healing methods.

SIGNIFICANCE

The financial burden and mortality associated with wounds is increasing, so managing wounds is essential. Traditional wound treatments include surgical and non-surgical methods, while modern techniques are advancing rapidly. This review examines the various traditional and modern techniques used for cutaneous wound healing.

KEY FINDINGS

Traditional wound treatments include surgical techniques such as debridement, skin flaps, and grafts. Non-surgical treatments include skin replacements, topical formulations, scaffold-based skin grafts, and hydrogel-based skin dressings. More modern techniques include using nanoparticles, growth factors, and bioactive substances in wound dressings. Bioengineered skin substitutes using biomaterials, cells, and growth factors are also being developed. Other techniques include stem cell therapy, growth factor/cytokine therapy, vacuum-assisted wound closure, and 3D-printed/bio-printed wound dressings.

CONCLUSION

Traditional wound treatments have been replaced by modern techniques such as stem cell therapy, growth factor/cytokine therapy, vacuum-assisted wound closure, and bioengineered skin substitutes. However, most of these strategies lack effectiveness and thorough evaluation. Therefore, further research is required to develop new techniques for cutaneous wound healing that are effective, cost-efficient, and appealing to patients.

Therapeutic effects of electrospun chitosan nanofibers on animal skin wounds: A systematic review and meta-analysis

Electrospun chitosan nanofibers (QSNFs) enhance the healing process by mimicking skin structure and function. The aim of this study was to analyze the therapeutic effects of QSNFs application on animal skin wounds to identify a potential direction for translational research in dermatology. The PRISMA methodology and the PICO scheme were used. A random effects model and mean difference analysis were applied for the meta-analysis. A meta-regression model was constructed, risk of bias was determined, and methodological quality assessment was performed. Of the 2370 articles collected, 54 studies were selected based on the inclusion and exclusion criteria. The wound healing area was used for building models on the 3rd, 7th, and 14th days of follow-up; the results were - 10.4% (95% CI, -18.2% to -2.6%, p = 0.001), -21.0% (95% CI, -27.3% to -14.7%, p = 0.001), and - 14.0% (95% CI, -19.1 to -8.8%, p = 0.001), respectively. Antioxidants and synthetic polymers combined with QSNFs further reduced skin wound areas (p < 0.05). The results show a more efficient reduction in wound area percentages in experimental groups than in control groups, so QSNFs could potentially be applied in translational human medicine research.

Development and optimization of film forming non-pressurized liquid bandage for wound healing by Box-Behnken statistical design

The goal of the current investigation was to develop a non-pressurized liquid bandage to promote the healing of wounds by using silver sulfadiazine. A three-factor three level box-behnken statistical design was employed to optimize the drug-loaded liquid bandage. Film-forming liquid bandage was developed by using ethyl-cellulose, dibutyl sebacate, and glycerol. For optimization, ethyl cellulose, dibutyl sebacate, and isopropyl myristate were taken as independent variables while tensile strength, water vapor absorption value, and drying time were taken as dependent variables. The film-forming liquid bandage was evaluated for various parameters like tensile strength, water vapor absorption value, drying time, viscosity, pH, in-vitro drug release studies, in-vivo wound healing studies, and stability studies. The optimized formulation was found with the tensile strength of 68.24 ± 0.24 MPa, water vapor absorption value of 2.00 ± 0.25 %, drying time of 1.75 ± 0.14 min, viscosity of 60 ± 0.5 cPs, pH of 6.0 ± 0.5 and good physicochemical properties with satisfactory film-forming ability. The in-vitro study shows that the release of test formulations was better than the marketed formulation. After 6 h of study, the liquid bandage and marketed formulation showed 41.02 % and 29.32 % of drug release respectively. Significant results were obtained for the in-vivo wound healing studies. Upon comparison with the control group (2.61 mm) and marketed formulation (1.44 mm), rats treated with the optimized formulation exhibited a noticeable improvement in wound contraction (0.8 mm). The liquid bandage after three months of stability testing was found to be stable with optimum. The film-forming liquid bandage was found to be an effective alternative to conventional topical preparations as it develops a thin polymeric layer on the wound and the skin around it and improves comfort for the patient by protecting the wound from external factors and physical harm.

Formulation and Comprehensive Evaluation of Biohybrid Hydrogel Membranes Containing Doxycycline or Silver Nanoparticles

Complicated wounds often require specialized medical treatments, and hydrogels have emerged as a popular choice for wound dressings in such cases due to their unique properties and the ability to incorporate and release therapeutic agents. Our focus was to develop and characterize a new optimized formula for biohybrid hydrogel membranes, which combine natural and synthetic polymers, bioactive natural compounds, like collagen and hyaluronic acid, and pharmacologically active substances (doxycycline or npAg). Dynamic (oscillatory) rheometry confirmed the strong gel-like properties of the obtained hydrogel membranes. Samples containing low-dose DOXY showed a swelling index of 285.68 ± 6.99%, a degradation rate of 71.6 ± 0.91% at 20 h, and achieved a cumulative drug release of approximately 90% at pH 7.4 and 80% at pH 8.3 within 12 h. The addition of npAg influenced the physical properties of the hydrogel membranes. Furthermore, the samples containing DOXY demonstrated exceptional antimicrobial efficacy against seven selected bacterial strains commonly associated with wound infections and complications. Biocompatibility assessments revealed that the samples exhibited over 80% cell viability. However, the addition of smaller-sized nanoparticles led to decreased cellular viability. The obtained biohybrid hydrogel membranes show favorable properties that render them suitable for application as wound dressings.

Electrospun PVA nanofiber mat for topical Deflazacort delivery: accentuated anti-inflammatory efficacy for wound healing

PURPOSE

Asses the wound healing activity of Polyvinyl alcohol - Deflazacort (PVA-DEF) nanofibers mats synthesized by electrospinning technology.

METHODS

PVA-DEF nanofiber mats were created with various PVA polymer concentrations using an electrospinning process. The morphological features and diameter of the electrospun nanofibrous mats were investigated using scanning electron microscopy (SEM). The in vitro DEF release rate from PVA electrospun nanofibrous mats was evaluated. In addition to assessing wound healing activity in vivo, histological, and immunochemical tests were conducted.

RESULTS

Results revealed a uniform and smooth surface of the fiber with an average diameter of the selected fibers of 533.9 nm ± 45.83. Also, PVA electrospun nanofiber mats showed an initial burst release of more than 50% of the DEF in 1 h, and the rest of the DEF was released gradually for up to 480 min. Fickian diffusion is the main DEF release mechanism from PVA electrospun nanofiber mats. In male Wistar albino rats with 1 cm2 excision wounds, in vivo studies revealed a significant improvement in wound healing rate via modulation of tumor necrosis factor-alpha (TNF-α) and vascular endothelial growth factor (VEGF) expression.

CONCLUSION

PVA-DEF nanofiber mats can be used effectively for improving wound healing.

Chitosan/Polylactic Acid Nanofibers Containing Astragaloside IV as a New Biodegradable Wound Dressing for Wound Healing

The ideal wound dressing should adequately protect the wound from bacterial infection and provide a suitable healing environment for the wound. Thus, we prepared a biodegradable functional nanofiber dressing with good antibacterial and biocompatibility by electrospinning technology. The average diameter of the dressing was 354 ± 185 nm, and the porosity was 93.27%. Scanning electron microscopy (SEM) showed that the dressing was smooth without beading. It was also characterized by Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The wettability and water vapor permeability of the dressing were tested; the results showed that the dressing had good wettability and permeability. The ability of drug release indicates that continuous release over a period of time is beneficial to wound healing. Finally, the antibacterial effect and in vivo pharmacodynamic evaluation of AS/CS/PLA nanofiber dressing were studied; the result showed that it had significant antibacterial activity and the ability to promote wound healing.

Biochemical and histological insights of 1,4-polyisoprene isolated from Sphenocentrum jollyanum pierre (menispermaceae) stem in wound healing activity in streptozotocin-induced diabetic rats

ETHNOPHARMACOLOGICAL RELEVANCE

Sphenocentrum jollyanum whole stem extract is used traditionally in combination with its leaves to treat chronic wounds and also ameliorate conditions that exacerbate wounds such as diabetes mellitus.

AIM OF THE STUDY

The study isolated the major wound healing bioactive compound from the non-polar fraction of S. jollyanum extract and evaluated the in vivo wound healing activity of a 0.10% w/w 1,4-polyisoprene-based ointment in streptozotocin-induced diabetic rats.

MATERIALS AND METHODS

The major bioactive constituent of S. jollyanum was isolated using a wound healing activity-guided approach and characterized the compound using 1D and 2D-NMR spectroscopic techniques. The wound healing activity study adopted both excision (wound contraction) and incision (biochemical) models.

RESULTS

In the excision model, the 1,4-polyisoprene caused 99% wound closure and restored the excised wound on day 12. On the 6th and 12th post-wounding days, 1,4-polyisoprene caused a significant (p < 0.001) elevation in the tensile strength (486 g) of the incision wound compared with the control (388 g). The biochemical (hexosamine and hydroxyproline) and antioxidant/inflammatory (ascorbic acid, superoxide dismutase, and glutathione peroxidase) parameters increased significantly while malondialdehyde was down-regulated in the wounds treated with 1,4-polyisoprene compared with control. The histological analysis of tissue sections taken from the edge and center of the wounds at 0-12 days post wounding revealed an increased tissue regeneration, accelerated collagen formation, and epidermal regeneration without edema or inflammation on the 12th day.

CONCLUSION

The major wound healing constituent of S. jollyanum is 1,4-polyisoprene and the study has provided a new class of compounds for further optimization.

Agaricus blazei Murill extract-loaded in alginate/poly(vinyl alcohol) films prepared by Ca2+ cross-linking for wound healing applications

This work aimed the development and evaluation of the wound healing activity of films based on sodium alginate, polyvinyl alcohol (PVA) and Ca²⁺ loaded with Agaricus blazei Murill hydroalcoholic extract (AbE). Firstly, AbE was prepared using a previously standardized methodology. The films were prepared by casting technique and cross-linked with Ca²⁺ using CaCl₂ as cross-linking agent. The physicochemical, morphological and water vapor barrier properties of the films were analyzed and the pre-clinical efficacy was investigated against the cutaneous wound model in mice. The films showed barrier properties to water vapor promising for wound healing. AbE showed physical and chemical interactions between both polymers, noticed by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermal analysis. The delivery of AbE in alginate/PVA films enhanced the antioxidant and wound healing properties of these polymers. Consequently, a reduction of malondialdehyde levels was observed, as well as an increase of the epidermis/dermis thickness and enhancement in collagen I deposition. Thus, these formulations are promising biomaterials for wound care and tissue repairing.

A review on polysaccharides mediated electrospun nanofibers for diabetic wound healing: Their current status with regulatory perspective

The current treatment strategies for diabetic wound care provide only moderate degree of effectiveness; hence new and improved therapeutic techniques are in great demand. Diabetic wound healing is a complex physiological process that involves synchronisation of various biological events such as haemostasis, inflammation, and remodelling. Nanomaterials like polymeric nanofibers (NFs) offer a promising approach for the treatment of diabetic wounds and have emerged as viable options for wound management. Electrospinning is a powerful and cost-effective method to fabricate versatile NFs with a wide array of raw materials for different biological applications. The electrospun NFs have unique advantages in the development of wound dressings due to their high specific surface area and porosity. The electrospun NFs possess a unique porous structure and biological function similar to the natural extracellular matrix (ECM), and are known to accelerate wound healing. Compared to traditional dressings, the electrospun NFs are more effective in healing wounds owing to their distinct characteristics, good surface functionalisation, better biocompatibility and biodegradability. This review provides a comprehensive overview of the electrospinning procedure and its operating principle, with special emphasis on the role of electrospun NFs in the treatment of diabetic wounds. This review discusses the present techniques applied in the fabrication of NF dressings, and highlights the future prospects of electrospun NFs in medicinal applications.

Experimentally Induced Burns in Rats Treated with Innovative Polymeric Films Type Therapies

Considering that microbial resistance to antibiotics is becoming an increasingly widespread problem, burn management, which usually includes the use of topical antimicrobial dressings, is still facing difficulties regarding their efficiency to ensure rapid healing. In this context, the main objective of this research is to include new oxytetracycline derivatives in polymeric-film-type dressings for the treatment of wounds caused by experimentally induced burns in rats. The structural and physico-chemical properties of synthesized oxytetracycline derivatives and the corresponding membranes were analyzed by FT-IR and MS spectroscopy, swelling ability and biodegradation capacity. In vitro antimicrobial activity using Gram-positive and Gram-negative bacterial strains and pathogenic yeasts, along with an in vivo study of a burn wound model induced in Wistar rats, was also analyzed. The newly obtained polymeric films, namely chitosan-oxytetracycline derivative membranes, showed good antimicrobial activity noticed in the tested strains, a membrane swelling ratio (MSR) of up to 1578% in acidic conditions and a biodegradation rate of up to 15.7% on day 7 of testing, which are important required characteristics for the tissue regeneration process, after the production of a burn. The in vivo study proved that chitosan-derived oxytetracycline membranes showed also improved healing effects which contributes to supporting the idea of using them for the treatment of wounds caused by burns.

Bilayer nanofibrous wound dressing prepared by electrospinning containing gallic acid and quercetin with improved biocompatibility, antibacterial, and antioxidant effects

OBJECTEIVES

The purpose of this study was to prepare an antibacterial, antioxidant, and biocompatible bilayer nanofibrous wound dressing by using electrospinning.

METHODS

The micromorphology and bilayer structure characteristics of the GA-Qe-PVP-PCL nanofibers were analyzed by SEM. The physicochemical characteristics were analyzed by XRD and FTIR. The uptake, mechanical properties, water contact angle, water vapor transmission and in vitro drug release were evaluated. In addition, the effect of antibacterial, antioxidant and biocompatability of the nanofibers were evaluated, respectively.

RESULTS

The SEM results showed that the GA-Qe-PVP-PCL nanofibers had a smooth surface, no beading phenomenon, and a prominent bilayer structure. The diameter and porosity of the drug-loading layer and waterproof support layer of the nanofibers were 842 ± 302 nm, 242 ± 50 nm, and 88.56 ± 1.67%, 94.49 ± 1.57%, respectively. Moreover, the water uptake, mechanical properties, water contact angle, and water vapor transmission showed ideal performance. The results of in vitro drug release indicated that GA and Qe were both released rapidly, which was conducive to accelerating wound healing. The GA-Qe-PVP-PCL nanofibers exhibited antibacterial effects against both bacteria as well as high antioxidant activity. Additionally, the GA-Qe-PVP-PCL nanofibers possessed good compatibility, could promote the proliferation, adhesion, and migration of L929 fibroblast cells.

CONCLUSION

The nanofibers we developed met the requirements of ideal materials for wound dressing, which makes the nanofibers the potential to be a wound dressing for wound care.

A New Insight to Silver Sulfadiazine Antibacterial Dressings: Nanoparticle-Loaded Nanofibers for Controlled Drug Delivery

The aim of this study was formulating a new-generation antibacterial dressing in a form of polymer-based hybrid nanofiber-nanoparticles, effective on Gram-negative and Gram-positive bacteria using silver sulfadiazine (SSD), an FDA-approved topical antibiotic. In this study, SSD nanoparticles were prepared with chitosan for taking the advantage of antibacterial and wound healing properties. Chitosan nanoparticles of SSD were prepared by using tripolyphosphate (TPP) or sulfobutylether-β-cyclodextrin (SBE-β-CD) as crosslinkers via ionic gelation method and then loaded to PVP-K30 and PVP-K90 nanofibers to obtain polymer-based nanofiber-nanoparticles. SSD-loaded chitosan nanoparticles prepared with SBE-β-CD had lower particle size (359.6 ± 19.9 nm) and polydispersity index (0.364 ± 0.113) as well, indicating a more desired particle size distribution but lower encapsulation efficiency (56.04% ± 4.33). It was found that loading drug in SBE-β-CD crosslinked nanoparticles and dispersing in nanofiber matrix lowered SSD release compared to  TPP crosslinked nanoparticle-loaded nanofibers. Drug release obtained by both TPP or SBE-β-CD crosslinked nanoparticle-loaded PVP-K30 nanofibers is significantly higher than nanoparticle-loaded PVP-K90 nanofibers, indicating that SSD release was mainly affected by polymer type. SSD nanoparticle-loaded PVP-K30 nanofibers were found to be effective against Gram-negative (Pseudomonas aeruginosa, Escherichia coli, Acinetobacter baumannii) and Gram-positive bacteria (Staphylococcus aureus and Enterococcus faecalis). SSD release was sustained by PVP-K90, resulting in lower antibacterial efficiency especially against Gram-positive bacteria. PVP-K30-based nanofiber-CS nanoparticle hybrids offer a new platform by combining and improving advantages of nanofibers and nanoparticles for obtaining controlled drug release and antibacterial efficacy.

Borrowing the Features of Biopolymers for Emerging Wound Healing Dressings: A Review

Wound dressing design is a dynamic and rapidly growing field of the medical wound-care market worldwide. Advances in technology have resulted in the development of a wide range of wound dressings that treat different types of wounds by targeting the four phases of healing. The ideal wound dressing should perform rapid healing; preserve the body’s water content; be oxygen permeable, non-adherent on the wound and hypoallergenic; and provide a barrier against external contaminants—at a reasonable cost and with minimal inconvenience to the patient. Therefore, choosing the best dressing should be based on what the wound needs and what the dressing does to achieve complete regeneration and restoration of the skin’s structure and function. Biopolymers, such as alginate (ALG), chitosan (Cs), collagen (Col), hyaluronic acid (HA) and silk fibroin (SF), are extensively used in wound management due to their biocompatibility, biodegradability and similarity to macromolecules recognized by the human body. However, most of the formulations based on biopolymers still show various issues; thus, strategies to combine them with molecular biology approaches represent the future of wound healing. Therefore, this article provides an overview of biopolymers’ roles in wound physiology as a perspective on the development of a new generation of enhanced, naturally inspired, smart wound dressings based on blood products, stem cells and growth factors.

Innovative Treatment Strategies to Accelerate Wound Healing: Trajectory and Recent Advancements

Wound healing is highly specialized dynamic multiple phase process for the repair of damaged/injured tissues through an intricate mechanism. Any failure in the normal wound healing process results in abnormal scar formation, and chronic state which is more susceptible to infections. Chronic wounds affect patients’ quality of life along with increased morbidity and mortality and are huge financial burden to healthcare systems worldwide, and thus requires specialized biomedical intensive treatment for its management. The clinical assessment and management of chronic wounds remains challenging despite the development of various therapeutic regimens owing to its painstakingly long-term treatment requirement and complex wound healing mechanism. Various conventional approaches such as cell therapy, gene therapy, growth factor delivery, wound dressings, and skin grafts etc., are being utilized for promoting wound healing in different types of wounds. However, all these abovementioned therapies are not satisfactory for all wound types, therefore, there is an urgent demand for the development of competitive therapies. Therefore, there is a pertinent requirement to develop newer and innovative treatment modalities for multipart therapeutic regimens for chronic wounds. Recent developments in advanced wound care technology includes nanotherapeutics, stem cells therapy, bioengineered skin grafts, and 3D bioprinting-based strategies for improving therapeutic outcomes with a focus on skin regeneration with minimal side effects. The main objective of this review is to provide an updated overview of progress in therapeutic options in chronic wounds healing and management over the years using next generation innovative approaches. Herein, we have discussed the skin function and anatomy, wounds and wound healing processes, followed by conventional treatment modalities for wound healing and skin regeneration. Furthermore, various emerging and innovative strategies for promoting quality wound healing such as nanotherapeutics, stem cells therapy, 3D bioprinted skin, extracellular matrix-based approaches, platelet-rich plasma-based approaches, and cold plasma treatment therapy have been discussed with their benefits and shortcomings. Finally, challenges of these innovative strategies are reviewed with a note on future prospects.

Bacterial Cellulose Properties Fulfilling Requirements for a Biomaterial of Choice in Reconstructive Surgery and Wound Healing

Although new therapeutic approaches for surgery and wound healing have recently made a great progress, there is still need for application of better and use novel methods to enhance biocompatibility as well as recovery and healing process. Bacterial Cellulose (BC) is natural cellulose in the form of nanostructure which has the advantages of being used in human body. The medical application of BC in reconstructive, cardiac and vascular surgery as well as wound healing is still under development, but without proved success of repetitive results. A review of studies on Bacterial Cellulose (BC) since 2016 was performed, taking into account the latest reports on the clinical use of BC. In addition, data on the physicochemical properties of BC were used. In all the works, satisfactory results of using Bacterial Cellulose were obtained. In all presented studies various BC implants demonstrated their best performance. Additionally, the works show that BC has the capacity to reach physiological as well as mechanical properties of relevance for various tissue replacement and can be produced in surgeons as well as patient specific expectations such as ear frames, vascular tubes or heart valves as well as wound healing dressings. Results of those experiments conform to those of previous reports utilizing ADM (acellular dermal matrix) and demonstrate that the use of BC has no adverse effects such as ulceration or extrusion and possesses expected properties. Based on preliminary animal as well as the few clinical data BC fittings are promising implants for various reconstructive applications since they are biocompatible with properties allowing blood flow, attach easily to wound bed and remain in place until donor site is healed properly. Additionally, this review shows that BC can be fabricated into patient specific shapes and size, with capability to reach mechanical properties of relevance for heart valve, ear, and muscle replacement. Bacterial cellulose appears, as shown in the above review, to be one of the materials that allow extensive application in the reconstruction after soft tissue defects. Review was created to show the needs of surgeons and the possibilities of using BC through the eyes and knowledge of biotechnologists.

Cellular Interaction of Human Skin Cells towards Natural Bioink via 3D-Bioprinting Technologies for Chronic Wound: A Comprehensive Review

Skin substitutes can provide a temporary or permanent treatment option for chronic wounds. The selection of skin substitutes depends on several factors, including the type of wound and its severity. Full-thickness skin grafts (SGs) require a well-vascularised bed and sometimes will lead to contraction and scarring formation. Besides, donor sites for full-thickness skin grafts are very limited if the wound area is big, and it has been proven to have the lowest survival rate compared to thick- and thin-split thickness. Tissue engineering technology has introduced new advanced strategies since the last decades to fabricate the composite scaffold via the 3D-bioprinting approach as a tissue replacement strategy. Considering the current global donor shortage for autologous split-thickness skin graft (ASSG), skin 3D-bioprinting has emerged as a potential alternative to replace the ASSG treatment. The three-dimensional (3D)-bioprinting technique yields scaffold fabrication with the combination of biomaterials and cells to form bioinks. Thus, the essential key factor for success in 3D-bioprinting is selecting and developing suitable bioinks to maintain the mechanisms of cellular activity. This crucial stage is vital to mimic the native extracellular matrix (ECM) for the sustainability of cell viability before tissue regeneration. This comprehensive review outlined the application of the 3D-bioprinting technique to develop skin tissue regeneration. The cell viability of human skin cells, dermal fibroblasts (DFs), and keratinocytes (KCs) during in vitro testing has been further discussed prior to in vivo application. It is essential to ensure the printed tissue/organ constantly allows cellular activities, including cell proliferation rate and migration capacity. Therefore, 3D-bioprinting plays a vital role in developing a complex skin tissue structure for tissue replacement approach in future precision medicine.

Cutaneous Wound Healing: An Update from Physiopathology to Current Therapies

The skin is the biggest organ of human body which acts as a protective barrier against deleterious agents. When this barrier is damaged, the organism promotes the healing process with several molecular and cellular mechanisms, in order to restore the physiological structure of the skin. The physiological control of wound healing depends on the correct balance among its different mechanisms. Any disruption in the balance of these mechanisms can lead to problems and delay in wound healing. The impairment of wound healing is linked to underlying factors as well as aging, nutrition, hypoxia, stress, infections, drugs, genetics, and chronic diseases. Over the years, numerous studies have been conducted to discover the correct approach and best therapies for wound healing, including surgical procedures and non-surgical treatments such as topical formulations, dressings, or skin substitutes. Thus, this general approach is necessary to facilitate the direction of further studies. This work provides updated concepts of physiological mechanisms, the factors that can interfere, and updated treatments used in skin wound healing.

Angelica dahurica and Rheum officinale Facilitated Diabetic Wound Healing by Elevating Vascular Endothelial Growth Factor

Traditional Chinese medicine (TCM) provides alternative treatment choices for diabetic wounds. The aim of this study was to evaluate the effects of Angelica dahurica and Rheum officinale (ARE) on diabetic wounds and its underlying action mechanism. A total of 36 healthy male Sprague-Dawley rats were randomly divided into three groups: diabetes mellitus (DM) rats treated with ARE (DM-ARE), DM rats treated with 0.9% saline (DM-NS), and non-DM rats treated with 0.9% saline (NDM-NS). DM was induced by intraperitoneal administration of 40 mg/kg of streptozotocin after a 2-week high-fat diet feeding. After excisional skin wounds and treatments, the remaining wound area (RWA) in each group was measured. The RWA in the DM-NS group (69.60% ± 2.35%) was greater than that in the DM-ARE (55.70% ± 1.85%) and NDM-NS groups (52.50% ± 2.77%) on day 6. Besides, the DM-ARE group showed higher vascular endothelial growth factor (VEGF), higher inducible nitric oxide synthase (iNOs), higher [Formula: see text]-smooth muscle actin ([Formula: see text]-SMA), and lower nuclear factor kappa-light-chain-enhancer of activated B cell (NF-[Formula: see text]B) expression in the wound skin tissue. These results showed that treatment with ARE shifted the recovery pattern of diabetic rats to the pattern of nondiabetic rats, indicating that ARE may improve wound healing in diabetic conditions.

Inhibitory Effect of Cold Atmospheric Plasma on Chronic Wound-Related Multispecies Biofilms

The presence of microbial biofilms in the wounds affects negatively the healing process and can contribute to therapeutic failures. This study aimed to establish the effective parameters of cold atmospheric plasma (CAP) against wound-related multispecies and monospecies biofilms, and to evaluate the cytotoxicity and genotoxicity of the protocol. Monospecies and multispecies biofilms were formed by methicillin-resistant Staphylococcus aureus (MRSA), Pseudomonas aeruginosa and Enterococcus faecalis. The monospecies biofilms were grown in 96 wells plates and multispecies biofilm were formed on collagen membranes. The biofilms were exposed to helium CAP for 1, 3, 5 and 7 min. In monospecies biofilms, the inhibitory effect was detected after 1 min of exposure for E. faecalis and after 3 min for MRSA. A reduction in P. aeruginosa biofilm’s viability was detected after 7 min of exposure. For the multispecies biofilms, the reduction in the overall viability was detected after 5 min of exposure to CAP. Additionally, cytotoxicity and genotoxicity were evaluated by MTT assay and static cytometry, respectively. CAP showed low cytotoxicity and no genotoxicity to mouse fibroblastic cell line (3T3). It could be concluded that He-CAP showed inhibitory effect on wound-related multispecies biofilms, with low cytotoxicity and genotoxicity to mammalian cells. These findings point out the potential application of CAP in wound care.

Bioactive anti-oxidative polycaprolactone/gelatin electrospun nanofibers containing selenium nanoparticles/vitamin E for wound dressing applications

In this study, polycaprolactone/gelatin (PCL/GEL) electrospun nanofibers containing biogenic selenium nanoparticles (Se NPs) and Se NPs/vitamin E (VE) with average diameters of 397.8 nm and 279.5 nm, respectively (as determined by SEM inspection) were prepared and their effect on wound healing was evaluated using in-vivo studies. The energy dispersive X-ray (EDX) mapping, TEM micrograph, and FTIR spectra of the prepared nanofibers strongly demonstrated well entrapment of Se NPs and VE into scaffolds. An amount of 57% Se NPs and 43% VE were gradually released from PCL/GEL/Se NPs/VE scaffold after 4 days immersion in PBS solution (pH 7.4). The both PCL/GEL/Se NPs and PCL/GEL/Se NPs/VE scaffolds supported 3T3 cell proliferation and attachment as confirmed by MTT assay and SEM imaging. Complete re-epithelialization, low level of edema and inflammatory cells in coordination with high level of oriented collagens demonstrated the wound healing activity of PCL/GEL/Se NPs/VE. Besides, significant antioxidant efficacy of PCL/GEL/Se NPs and PCL/GEL/Se NPs/VE scaffolds was demonstrated according to GSH and MDA assays. To sum up, the prepared PCL/GEL/Se NPs/VE scaffold in the present study represented suitable healing effect on animal model which candidate it for further studies.

Multifunctional bioactive core-shell electrospun membrane capable to terminate inflammatory cycle and promote angiogenesis in diabetic wound

Diabetic wound (DW) healing is a major clinical challenge due to multifactorial complications leading to prolonged inflammation. Electrospun nanofibrous (NF) membranes, due to special structural features, are promising biomaterials capable to promote DW healing through the delivery of active agents in a controlled manner. Herein, we report a multifunctional composite NF membrane loaded with ZnO nanoparticles (NP) and oregano essential oil (OEO), employing a new loading strategy, capable to sustainedly co-deliver bioactive agents. Physicochemical characterization revealed the successful fabrication of loaded nanofibers with strong in vitro anti-bacterial and anti-oxidant activities. Furthermore, in vivo wound healing confirmed the potential of bioactive NF membranes in epithelialization and granulation tissue formation. The angiogenesis was greatly prompted by the bioactive NF membranes through expression of vascular endothelial growth factor (VEGF). Moreover, the proposed NF membrane successfully terminated the inflammatory cycle by downregulating the pro-inflammatory cytokines interleukin −6 (IL-6) and matrix metalloproteinases-9 (MMP-9). In vitro and in vivo studies revealed the proposed NF membrane is a promising dressing material for the healing of DW.

•

A modified loading strategy was employed for dual bioactive agents through electrospinning.

•

The nanofibers sustainedly released the two bioactive agents.

•

The fabricated bioactive membranes turned out to be biocompatible, antioxidant and antibacterial.

•

The proposed bioactive membranes have posesses the potential of healing diabetic wounds.

Electrospun nanofiber-based drug delivery platform: advances in diabetic foot ulcer management

INTRODUCTION

Electrospinning is a facile and viable method for the fabrication of nanofibers. Electrospun nanofiber has a great potential in providing local drug or therapeutic molecule delivery to the wound site. The versatile nature of this technique ensures a broad scope of material used in the fabrication of nanofibers.

AREA COVERED

A brief introduction to diabetic foot ulcer (DFU) is covered with its pathogenesis, followed by the role of electrospun nanofibers in DFU. This review covers the evolution of the electrospinning technique over the past few years, various types of electrospun nanofibers reported for DFU or chronic diabetic wounds, the challenges associated with the preparation of nanofibers, and various methods to evaluate their efficacy and performance in diabetic wound healing.

EXPERT OPINION

Electrospinning-based nanofibers provide a safe, effective, and multifunctional system for effective management of DFU.