Effects of Ca2+ crosslinking on structure and properties of waterborne polyurethane-carboxymethylated guar gum films

Exploring the Effectiveness of Carboxymethylated and Crosslinked Albizia Procera Gum in Diltiazem Hydrochloride Matrix Tablets: A Comparative Analysis

This study investigates the efficacy of modified Albizia procera gum as a release-retardant polymer in Diltiazem hydrochloride (DIL) matrix tablets. Carboxymethylated Albizia procera gum (CAP) and ionically crosslinked carboxymethylated Albizia procera gum (Ca-CAP) were utilized, with Ca-CAP synthesized via crosslinking CAP with calcium ions (Ca2+) using calcium chloride (CaCl2). FTIR analysis affirmed polymer compatibility, while Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) assessed thermal behavior and crystallinity, respectively. Zeta potential analysis explored surface charge and electrostatic interactions, while rheology examined flow and viscoelastic properties. Swelling and erosion kinetics provided insights into water penetration and stability. CAP's carboxymethyl groups (-CH2-COO-) heightened divalent cation reactivity, and crosslinking with CaCl2 produced Ca-CAP through -CH2-COO- and Ca2+ interactions. Structural similarities between the polymers were revealed by FTIR, with slight differences. DSC indicated modified thermal behavior in Ca-CAP, while Zeta potential analysis showcased negative charges, with Ca-CAP exhibiting lower negativity. XRD highlighted increased crystallinity in Ca-CAP due to calcium crosslinking. Minimal impact on RBC properties was observed with both polymers compared to the positive control as water for injection (WFI). Ca-CAP exhibited improved viscosity, strength, controlled swelling, and erosion, allowing prolonged drug release compared to CAP. Stability studies confirmed consistent six-month drug release, emphasizing Ca-CAP's potential as a stable, sustained drug delivery system over CAP. Robustness and accelerated stability tests supported these findings, underscoring the promise of Ca-CAP in controlled drug release applications.

Optimization of biodegradable cross-linked guar-gum-PLA superabsorbent hydrogel formation employing response surface methodology

Cross-linked polymer networks with three-dimensional structures known as hydrogels absorb and retain a large amount of water. Because of their properties, hydrogel materials have been considered a boon in agriculture science. In the present investigation, guar gum cross-linked polylactic acid hydrogel is synthesized using MMA as monomer and optimized using a central composite design of response surface methodology for better swelling. The studied input variables are monomer concentration, initiator concentration, and cross-linker concentration at constant pH and temperature. The constructed response model has been tested using the analysis of variance (ANOVA), where the model F-value of 4.64 indicates that the model is significant. The R2 value (0.806) (multiple correlation coefficient) and the standard deviation for the quadratic model were both found to be 4.27. A separate validation experiment is conducted to ensure the quadratic model is sufficient. The hydrogel synthesis was confirmed by characterization techniques like FTIR spectroscopy, SEM, TGA, XRD, and water absorption studies. Synthesized hydrogels swell maximum in water and least in 0.9 % NaCl solution. The present work highlights the development of guar gum-based super-absorbent hydrogels, which are biodegradable and lead to potential application in agriculture, especially in drought regions.

Enhancing the Mechanical Properties of 3D-Printed Waterborne Polyurethane-Urea and Cellulose Nanocrystal Scaffolds through Crosslinking

In this work, shape-customized scaffolds based on waterborne polyurethane-urea (WBPUU) were prepared via the combination of direct ink writing 3D-printing and freeze-drying techniques. To improve the printing performance of the ink and guarantee a good shape fidelity of the scaffold, cellulose nanocrystals (CNC) were added during the synthesis of the WBPUU and some of the printed constructs were immersed in CaCl₂ prior to the freeze-drying process to promote ionic crosslinking between calcium ions and the polyurethane. The results showed that apart from allowing the ink to be successfully printed, obtaining scaffolds with good shape fidelity, the addition of the CNC resulted in a greater homogeneity of the porous structure as well as an increase of the swelling capacity of the scaffolds. Additionally, the CNC has a reinforcement effect in the printed systems, presenting a higher compression modulus as the CNC content increases. In the case of samples crosslinked by calcium ions, a rigid shell was observed by scanning electron microscopy, which resulted in stiffer scaffolds that presented a lower water absorption capacity as well as an enhancement of the thermal stability. These results showed the potential of this type of post-printing process to tune the mechanical properties of the scaffold, thus widening the potential of this type of material.

Experimental investigation on the high-pressure sand suspension and adsorption capacity of guar gum fracturing fluid in low-permeability shale reservoirs: factor analysis and mechanism disclosure

Guar fracturing technology has been considered as a kind of popular EOR technology, but the weak static suspension capacity becomes a challenge due to the poor temperature resistance and stability of guar fracturing fluid. The main goal of this investigation is to explore the effect of different factors on the high-pressure static sand suspension of guar gum fracturing fluid by a synthetic efficient nano-ZrO₂ cross-linker. In particular, a mechanism of static suspended sand of nano-ZrO₂ cross-linker is analyzed by microscopic simulation. The adsorption performance of guar fracturing fluid on the shale surface is also studied for analyzing the environmental pollution and damage of guar gum fracturing fluid to shale reservoirs after cross-linking in this investigation. The results obtained that the inclusion of a small content of nano-ZrO₂ cross-linker (0.4%) leads to an apparent increase of fracturing fluid viscosity and decrease in the falling quality of gravel (104 mPa·s and 0.3 g) compared to the classical cross-linker (63 mPa·s and 3.5 g). The lower adsorption capacity of guar fracturing fluid containing nano-ZrO₂ cross-linker on the shale surface means that it has a weaker pollution ability to the shale reservoir than the commercially available cross-linker. Meanwhile, the grid structure density formed by nano-cross-linker and guar gum is considered to be the key factor to significantly change the suspended sand capacity. The investigation of nano-cross-linker cannot only provide necessary theoretical technology and data support for the stability of water-based fracturing fluid, efficient sand carrying, and the development of water-based fracturing technology, but also effectively protect the underground shale reservoir.

Guar (Cyamopsis tetragonoloba L.) plant gum: From biological applications to advanced nanomedicine

Natural polymers are an efficient class of eco-friendly and biodegradable polymers, because they are readily available, come from natural sources, inexpensive and can be chemically modified with the correct reagents. Guar gum (GG) is a natural polymer with great potential to be used in pharmaceutical formulations due to its unique composition and lack of toxicity. GG can be designed to suit the needs of the biological and medical engineering sectors. In the development of innovative drug delivery systems, GG is commonly utilized as a rate-controlling excipient. In this review, different properties of GG including chemical composition, extraction methods and its usefulness in diabetes, cholesterol lowering, weight control, tablet formulations as well as its food application were discussed. The other purpose of this study is to evaluate potential use of GG and its derivatives for advanced nanomedicine such as drug delivery, tissue engineering and nanosensing. It should be noted that some applicable patents in medical area have also been included in the rest of this survey to extend knowledge about guar gum and its polymeric nature.

Preparation, development and characterization of Leucaena leucocephala galactomannan (LLG) conjugated sinapic acid: A potential colon targeted prodrug

Sinapic acid (SA), a widely prevalent hydroxycinnamic acid, possess numerous biological activities owing to its antioxidant property. The present study was aimed to prepare colon targeted polysaccharidic/polymeric ester prodrug of SA (a microbially triggered system) using Leucaena leucocephala galactomannan (LLG) as a polysaccharidic carrier. The polymeric conjugates of SA-LLG were found to exhibit an increase in % yield and DS with increase in amount of SA and volume of thionyl chloride. The degree of depolymerization of SA-LLG prodrug batches were evaluated using optimized concentration of galactomannase. The SA-LLG prodrug was characterized employing UV and FTIR spectroscopy, ¹H NMR and XRD. In vitro release study of the optimized prodrug batch (SL10) suggested stable nature of SA-LLG conjugate under acidic (pH 1.2) and alkaline conditions (pH 6.8). The treatment of prodrug with galactomannase (15 mg/mL) followed by esterase (10 U/mL) enzyme released approximately 81% of SA after 24 h. The cell viability results revealed that free SA and SA-LLG were found to have similar antiproliferative potential against human colon cancer cell lines (HCT-116 cells). Our investigation revealed that polysaccharidic prodrug, SA-LLG, has the potential for colon targeting of SA and thus can be employed for the treatment of Inflammatory Bowel Diseases (IBDs).

Chemical Modifications of Guar Gum for Drug Delivery Applications: A Review

Guar gum is a natural excipient extracted from the plant seed of Cyamopsis tetragonolobus, belonging to the Leguminosae family. In the pharmaceutical industries, it contributes an important role due to its non-toxicity, ease of availability, biodegradability and eco-friendly nature. The major constituents of guar gum is galactomannan which is composed of D-galactose anhydride and mannose anhydride. Hydroxyl groups present in galactomannan can be modified by carboxymethylation, grafting or cross-linking with other excipients for developing modified polymers having desirable properties. Guar gum is commonly used as a suspending, emulsifying, stabilizing, gelling and thickening agent in various dosage forms. The guar gum derivatives are also useful in controlling the drug release from the pharmaceutical dosage forms. In this review, different aspects of synthesis of guar gum derivatives and its applications in various drug delivery systems is described.

Bioengineered three-dimensional physical constructs from quince seed mucilage for human adipose-derived mesenchymal stem cells

In this study, we aimed at fabricating a novel porous physical construct from quince seed mucilage for translational medicine applications. To achieve this goal, quince seed mucilage was extracted, molded, and freeze-dried. After being freeze-dried, the molded constructs were chemically crosslinked with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide/N-hydroxysuccinimide to maintain the mechanical integrity of the structure. The fabricated scaffolds were characterized in-depth by scanning electron microscopy, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller analysis, thermogravimetric analysis, and dynamic mechanical analysis in addition to the swelling, liquid uptake, and porosity tests. The extraction yield of mucilage was calculated to be 6.28% ± 0.40% (n = 3). The swelling ratio of crosslinked quince seed mucilage–derived scaffolds was found to be 12,677.50% ± 388.82% (n = 3), whereas the porosity of crosslinked quince seed mucilage–derived scaffolds was 83.43% ± 2.84% (n = 3). The analyses confirmed the crosslinked quince seed mucilage–derived scaffolds to be possessed interconnected, highly porous structure. Afterward, human adipose-derived mesenchymal stem cells were seeded on the crosslinked quince seed mucilage–derived scaffolds, and the cell viability on the scaffolds was assessed with 3-[4,5-dimethylthiazole-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay. The MTT results revealed the scaffolds not to be possessed any cytotoxic effect on seeded cells. Human adipose-derived mesenchymal stem cells adhesion and migration on the crosslinked quince seed mucilage–derived scaffolds were also evaluated histologically using hematoxylin and eosin staining in addition to scanning electron microscopy analysis. In conclusion, we believe that crosslinked quince seed mucilage–derived scaffolds have the potential to be an alternative to routinely used polysaccharides in regenerative medicine applications.

Synthesis and Properties of Linear Polyether-Blocked Amino Silicone-Modified Cationic Waterborne Polyurethane

In this study, a waterborne polyurethane (WPU) is synthesized by using polytetramethylene ether glycol (PTMEG) to form the soft segment, 1,4-butanediol (BDO) as the chain extender, n-methyldiethanolamine (MDEA) as a hydrophilic chain extender, and isophorone diisocyanate (IPDI) to form the hard segment. Furthermore, the modified cationic WPU emulsion and its films are created through a reaction between the WPU and a linear polyether-blocked amino silicone (LEPS), which is an organosilicon compound that imparts flexibility. The properties of the structure and formed WPU films are then characterized by using Fourier transform infrared spectrometry, a thermogravimetric analysis, atomic force microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy, as well as by measuring the water contact angle, testing the water absorption, etc. It is found that, with an increase in the LEPS content in the WPU, the particle size of the modified WPU emulsion is increased, the WPU films are more flexible, and the resistance of the modified WPU films to heat and water are increased, while the crystallinity is reduced. The polysiloxane chain segment, which is added to the LEPS-modified WPU emulsion, is significantly enriched on the surface of the modified WPU films, while there are no adverse effects of the LEPS-modified WPU emulsion on the adhesive force between the WPU and substrate. When the LEPS content of the WPU is 14.0 wt%, the modified WPU emulsion and film provide the best performance.

Efeito da utilização de gomas na viscosidade e nas características sensoriais de shake à base de farinha de banana verde

Resumo Este trabalho teve como objetivo testar diferentes proporções de gomas na elaboração de um shake desenvolvido com farinha de banana verde, além de avaliar as suas propriedades organolépticas. Analisaram-se seis formulações com os seguintes ingredientes: farinha de banana verde (FBV), leite em pó integral, sucralose, cacau e diferentes proporções de goma xantana (GX) e goma guar (GG), nas proporções (GX:GG): F1 (1:0); F2 (0:1); F3 (1:1); F4 (1:3); F5 (3:1); F6 sem estabilizante. As formulações de shake foram submetidas ao teste de viscosidade, realizado a cada três dias, durante um período de 15 dias. Foi realizada análise sensorial com voluntários, em cabines individuais. A aceitabilidade dos atributos aparência, aroma, sabor, textura e impressão global foi avaliada utilizando-se a escala hedônica de 9 pontos. Foram realizadas análises estatísticas utilizando-se o Teste de Variância (ANOVA) e o Teste de Tukey a 5% de probabilidade. O estudo foi importante para demonstrar que a viscosidade dos produtos influencia nas características sensoriais e, dessa forma, interfere na escolha dos consumidores.

Efficacy of protein rich pearl powder on antioxidant status in a randomized placebo-controlled trial

Pearl is one of the well-known traditional Chinese medicine (TCM) prescribed for treating various skin and bone related disorders due to its abundant proteins and mineral contents. The present investigation focused on antioxidation and life span prolonging effects from different extracts of pearl powder. During in vitro studies, various oxidative indices were evaluated, along with lifespan-prolonging effect were checked using wild-type Caenorhabditis elegans. For the clinical trial, 20 healthy middle-aged subjects were recruited and separated into 2 groups as experimental and placebo group, who received 3 g of pearl powder/d (n = 10) and 3 g of placebo/d (n = 10) for 8 weeks, respectively. During the initial, 2nd, 4th, 6th, 8th and 10th weeks the blood samples were collected for biochemical analysis. The protein extract of pearl powder recorded maximum (p < 0.05) antioxidant activity (20–68%) as well as efficiently prolonged the life span of C. elegans by 18.87%. Pearl powder supplemented subjects showed a substantial increase (p < 0.05) in total antioxidant capacity from 0.45 to 0.69 mM, total thiols from 0.23 to 0.29 mM, Glutathione content from 5.89 to 9.19 μM, enzymic antioxidant activity (SOD-1248 to 1308; Gpx-30 to 32; GR-2.4 to 2.9) as well as considerably suppressed the lipid peroxidation products from 4.95 to 3.27 μM. The outcome of both in-vitro and in-vivo antioxidant activity inferred that protein extract of pearl powder was a potent antioxidant and thereby prolonged the lifespan of C. elegans. Hence, pearl powder could be recommended for treating various age-related degenerative disorders.

Preliminary characterization of genipin-cross-linked silk sericin/poly(vinyl alcohol) films as two-dimensional wound dressings for the healing of superficial wounds

The genipin-cross-linked silk sericin/poly(vinyl alcohol) (PVA) films were developed aiming to be applied as two-dimensional wound dressings for the treatment of superficial wounds. The effects of genipin cross-linking concentration on the physical and biological properties of the films were investigated. The genipin-cross-linked silk sericin/PVA films showed the increased surface density, tensile strength, and percentage of elongation, but decreased percentage of light transmission, water vapor transmission rate, and water swelling, compared to the non-cross-linked films. This explained that the cross-linking bonds between genipin and silk sericin would reduce the mobility of molecular chains within the films, resulting in the more rigid molecular structure. Silk sericin was released from the genipin-cross-linked films in a sustained manner. In addition, either L929 mouse fibroblast or HaCat keratinocyte cells showed high percentage of viability when cultured on the silk sericin/PVA films cross-linked with 0.075 and 0.1% w/v genipin. The in vivo safety test performed according to ISO 10993-6 confirmed that the genipin-cross-linked silk sericin/PVA films were safe for the medical usages. The efficacy of the films for the treatment of superficial skin wounds will be further investigated in vivo and clinically. The genipin-cross-linked silk sericin/PVA films would be promising choices of two-dimensional wound dressings for the treatment of superficial wounds.