A new insight into the gelatinization process of native starches

Research on the quantitative relationship of the viscosity reduction effect of large-ring cyclodextrin on potato starch during gelatinization process and mechanism analysis

Starch is extensively used across various fields due to its renewable properties and cost-effectiveness. Nonetheless, the high viscosity that arises from gelatinization poses challenges in the industrial usage of starch at high concentrations. Thus, it's crucial to explore techniques to lower the viscosity during gelatinization. In this study, large-ring cyclodextrins (LR-CDs) were synthesized from potato starch (PS) by using 4-α-glucanotransferase and then added to PS to alleviate the increased viscosity during gelatinization. The results from rapid viscosity analyzer (RVA) demonstrated that the inclusion of 5 % (w/w) LR-CDs markedly reduced the peak viscosity (PV) and final viscosity (FV) of PS by 49.85 % and 28.17 %. In addition, there was a quantitative relationship between PV and LR-CDs. The equation was fitted as y = 2530.73×e-x/2.48+1832.79, which provided a basis for the regulation of PS viscosity. The mechanism of LR-CDs reducing the viscosity of PS was also studied. The results showed that the addition of LR-CDs inhibited the gelatinization of PS by enhancing orderliness and limiting water absorption, resulting in a decrease in viscosity. This study provides a novel method for reducing the viscosity of starch, which is helpful for increasing its concentration and reducing energy consumption in industrial applications.

Physicochemical and rheological properties of ultrasonic-assisted pregelatinized rice flour

This study evaluated the physical and rheological properties of whole rice flour treated for different sonication times (0-15 min). Ultrasonication reduces the particle size of rice flour and improves its solubility. Viscosity tests using RVA and steady shear showed a notable decrease in the viscosity of the rehydrated pregelatinized rice flour. Although no unusual patterns were observed in the XRD analysis, the FT-IR and microstructure morphology findings suggest that ultrasonication led to structural changes in the rice flour. Overall, the study indicates that ultrasonication is a practical and clean method for producing plant-based drinks from rice flour, which could expand its limited applications in the beverage industry.

Comprehensive investigation of pressure-induced gelatinization of starches using in situ and ex-situ technical analyses

The pressure-induce gelatinization of pea starch, potato starch and corn starch was investigated by a combination of in situ and ex-situ technical analyses. According to in-situ observation of gelatinization process and the analysis of granular morphology by scanning electronic microscopy (SEM), the pressure that caused potato starch gelatinization was the highest at 600 MPa. This was followed by pea starch, and the pressure that caused the gelatinization of corn starch was the lowest at 400 MPa. In situ Raman spectral analysis revealed the molecular mechanism of starch gelatinization. This indicated that high pressure treatment resulted in the modification of the structure of the double helical polymers and the degree of a double helix of the starch crystalline varied as well. This study dynamically monitors the starch gelatinization process, aiming to better understand the gelatinization mechanism and provide a theoretical basis for the application of pressure in the starch field.

Physicochemical properties of amorphous granular starch (AGS) prepared by non-thermal gelatinization by high hydrostatic pressure (HHP) and spray drying

Corn starch was gelatinized by high hydrostatic pressure (HHP) and spray drying to make amorphous granular starch (AGS), and their physicochemical properties were compared with the conventionally prepared (heat-gelatinized and spray dried) AGS to devise a novel AGS preparation methodology. Pressure-induced (PAGS) and heat-induced AGS (HAGS) maintained their granular shape but lost their birefringence indicating that both methods could prepare AGS. DSC (differential scanning calorimeter) and XRD (X-ray diffraction) analysis confirmed the complete loss of amylopectin double helices and crystallinity of both PAGS and HAGS. However, their swelling power, solubility, RVA pasting properties, acid/shear stability, gel forming ability and textural properties were completely different. PAGS exhibited constrained swelling, suppressed amylose leaching, and reduced viscosity. Notably, HAGS formed a gel without heating, whereas PAGS yielded a viscous paste with water-soluble attributes. Even after reheating, PAGS maintained its granular structure with comparably less swelling and weaker gel strength than HAGS. Consequently, newly developed PAGS exhibited distinctive characteristics compared to the conventional HAGS, such as lower solubility and swelling power, viscosity, textural properties, and high acid and shear stabilities, rendering it a viable option for various applications within the food industry.

Effect of Damaged Starch and Wheat-Bran Arabinoxylans on Wheat Starch and Wheat Starch-Gluten Systems

This study investigated the impact of damaged starch and arabinoxylans on the thermal and pasting behavior of mixtures containing starch and gluten. The mixtures containing starch, arabinoxylans, and gluten were dispersed in water and a 50% sucrose solution. When arabinoxylans were added to native starch in water, it did not modify the viscosity profiles. An increase in viscosity parameters was observed due to the addition of arabinoxylans to starch with a higher level of damage. Gluten did not influence the effects caused by arabinoxylans. In the sucrose solution, arabinoxylans caused an increase in the viscosity parameters of native starch and starch with higher damage content dispersions. Gluten caused greater viscosity increases when arabinoxylans were added. In water, the addition of arabinoxylans to native starch caused a decrease in the enthalpy of gelatinization and an increase in the onset temperature. Adding arabinoxylans to starch with a higher level of damage caused the opposite effects. In the presence of sucrose, arabinoxylans caused a decrease in the enthalpy of gelatinization. These results lay the foundations for studying the influence of damaged starch and arabinoxylans in water-rich systems characterized by the presence of substantial proportions of sucrose, such as batter formulations.

The Bran and Grain Grinding Level Affect the Tensile Characteristics of Bioplastics Derived from Wholegrain Wheat Flours

The mechanical performance of thermoplastic bulk samples obtained by plasticizing wheat flours differing in grain hardness, alveographic parameters, absence or presence of bran, and grinding level was assessed. Grains of four bread wheat (Triticum aestivum L.) cultivars (Altamira, Aubusson, Blasco, and Bologna) were milled with the aim of producing single-cultivar refined flour (R), or wholegrain flour with fine (F) or coarse (C) grinding. The flours were plasticized, injection molded and tested for tensile properties. The results confirmed that the presence of bran increased the strength (σ) and reduced the elongation at break (ε) of thermoplastics obtained from the flours of each cultivar. The grinding level had an effect, since σ was higher and ε was lower in F than in C samples. SEM analysis of samples revealed that the bran and its texture affected the exposure of starch granules to plasticizer. Composting experiments also revealed that the formulations are able to disintegrate within 21 days with a mass loss rate higher in plastics from F than C flours, while germination tests carried out with cress seeds indicated that it takes two months before the compost loses its phytotoxic effects. Overall, the refining and bran particle size of wheat flours, besides their gluten composition and baking properties, represent novel choice factors to be considered when tailoring the manufacturing of plastic materials for selected requirements and uses.

Changes in morphological and structural characteristics of high amylose maize starch in alkaline solution at different temperatures

In this study, high amylose maize starch(HAMS)was treated by Hydrothermal-alkali. SEM, SAXS, XRD, FTIR, LC-Raman, ¹³C CP/MAS NMR, GPC and TGA were used to study the changes in the granules and structure of HAMS. The results show that the granule morphology, lamellar structure, and birefringence of HAMS remained intact at 30 °C and 45 °C. With increasing temperature, the starch granules are fragmented, and the crystallinity, DD, FWHM values, molecular weight, and thermal stability of HAMS decrease. The double helical structure dissociated, and the content of amorphous regions increased, indicating the from order to the disorder of the HAMS structure. A similar annealing behavior occurred in HAMS at 45 °C, with the rearrangement of amylose and amylopectin occurring. At 75 °C and 90 °C, the short-chain starch produced by chain breakage regroups to form an ordered double helix structure. In general, the granule structure level of HAMS was damaged to different degrees at varying temperatures. HAMS showed gelatinization behavior in alkaline solutions when the temperature is 60 °C. This study expects to provide a model for the gelatinization theory of HAMS systems.

Designing liquefaction and saccharification processes of highly concentrated starch slurry: Challenges and recent advances

Starch-based sugars are an important group of starch derivatives used in food, medicine, chemistry, and other fields. The production of starch sugars involves starch liquefaction and saccharification processes. The production cost of starch sugars can be reduced by increasing the initial concentration of starch slurry. However, the usage of the highly concentrated starch slurry is characterized by challenges such as low reaction efficiency and poor product performance during the liquefaction and saccharification processes. In this study, we endeavored to provide a reference guide for improving high-concentration starch sugar production. Thus, we reviewed the effects of substrate concentration on the starch sugar production process and summarized several potential strategies. These regulation strategies, such as physical field pretreatment, complex enzyme-assisted, and temperature control, can significantly increase the starch concentration and mitigate the challenges of using highly concentrated starch slurry. We believe that highly concentrated starch sugar production will achieve a qualitative leap in the future. This review provides theoretical guidance and highlights the importance of high concentration in starch-based sugar production. Further studies are needed to explore the fine structure and enzyme attack mode during the liquefaction and saccharification processes to regulate the production of more targeted products.

The Effect of Different Ratios of Starch and Freeze-Thaw Treatment on the Properties of Konjac Glucomannan Gels

The composite gels of konjac glucomannan (KGM) and corn starch (CS) were prepared and treated by the freeze-thaw method. For KGM-CS gels, as the starch ratio rose from 0 to 100%, storage modulus (G') decreased by 97.7% (from 3875.69 Pa to 87.72 Pa), degradation temperature decreased from 313.32 °C to 293.95 °C, and crystallinity decreased by 16.7%. For F-KGM-CS gels, G' decreased by 99.0% (from 20,568.10 Pa to 204.09 Pa), degradation temperature increased from 289.68 °C to 298.07 °C, and crystallinity decreased by 17.1% with more starch content. The peak in infrared spectroscopy shifted to a higher wavenumber with more starch and to a lower wavenumber by freezing the corresponding composite gels. The detected retrogradation of the composite gels appeared for KGM-CS with 80% starch and F-KGM-CS with 40% starch. The endothermic enthalpy of free water rose by 10.6% and 10.1% with the increase in starch for KGM-CS and F-KGM-CS, respectively. The results of moisture distribution found that bound water migrated to free water and the water-binding capacity reduced with more starch. The results demonstrated that the molecular interaction in composite gels was weakened by starch and strengthened by freezing.

High-amylose maize starch: Structure, properties, modifications and industrial applications

High-amylose maize refers to a special type of maize cultivar with a 50 %-90 % amylose content of the total starch. High-amylose maize starch (HAMS) is of interest because it possesses unique functionalities and provides many health benefits for humans. Therefore, many high-amylose maize varieties have been developed via mutation or transgenic breeding approaches. From the literature reviewed, the fine structure of HAMS is different from the waxy and normal corn starches, influencing its gelatinization, retrogradation, solubility, swelling power, freeze-thaw stability, transparency, pasting and rheological properties, and even in vitro digestion. HAMS has undergone physical, chemical, and enzymatical modifications to enhance its characteristics and thereby broaden its possible uses. HAMS has also been used for the benefit of increasing resistant starch levels in food products. This review summarizes the recent developments in our understanding of the extraction and chemical composition, structure, physicochemical properties, digestibility, modifications, and industrial applications of HAMS.

Insights on Some Polysaccharide Gel Type Materials and Their Structural Peculiarities

Global resources have to be used in responsible ways to ensure the world's future need for advanced materials. Ecologically friendly functional materials based on biopolymers can be successfully obtained from renewable resources, and the most prominent example is cellulose, the well-known most abundant polysaccharide which is usually isolated from highly available biomass (wood and wooden waste, annual plants, cotton, etc.). Many other polysaccharides originating from various natural resources (plants, insects, algae, bacteria) proved to be valuable and versatile starting biopolymers for a wide array of materials with tunable properties, able to respond to different societal demands. Polysaccharides properties vary depending on various factors (origin, harvesting, storage and transportation, strategy of further modification), but they can be processed into materials with high added value, as in the case of gels. Modern approaches have been employed to prepare (e.g., the use of ionic liquids as "green solvents") and characterize (NMR and FTIR spectroscopy, X ray diffraction spectrometry, DSC, electronic and atomic force microscopy, optical rotation, circular dichroism, rheological investigations, computer modelling and optimization) polysaccharide gels. In the present paper, some of the most widely used polysaccharide gels will be briefly reviewed with emphasis on their structural peculiarities under various conditions.

Insight into multi-scale structural evolution during gelatinization process of normal and waxy maize starch

By using a mimicked heating with ex-situ liquid nitrogen flash freezing method, multi-scale structural evolution behaviors of normal maize starch (NMS) and waxy maize starch (WMS) during gelatinization process were studied. The results from SEM, X-ray diffraction (XRD), FTIR/solid state NMR spectroscopy and small angle X-ray scattering (SAXS) showed that NMS and WMS exhibited differently structural evolution behavior during gelatinization process. As the temperature increase, the proportion of the NMS granules with cavity gradually increased, while after heating beyond (peak gelatinization temperature (Tp) + conclusion gelatinization temperature (Tc))/2 the disappearance of starch granule integrity occurred for WMS. The relative crystallinity of NMS declined from 32.8 to 15.26% gradually, as that of WMS declined from 42.43 to 13.09% with a sharply descent when heated beyond (Tp + Tc)/2. The loss of short-range order structure of NMS and WMS showed same trends according to FTIR and NMR. Semicrystalline lamellae of NMS became thinner gradually while that of WMS showed an apparently narrowing after heating beyond (Tp + Tc)/2. These results suggest that the destruction of double helix in amylopectin structure had greatly influence on the larger scale structure of starch samples. This strategy is important for thorough understanding and profiting starch-based food processing.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05520-2.

The use of time domain 1 H NMR to study proton dynamics in starch-rich foods: A review

Starch is a major contributor to the carbohydrate portion of our diet. When it is present with water, it undergoes several transformations during heating and/or cooling making it an essential structure-forming component in starch-rich food systems (e.g., bread and cake). Time domain proton nuclear magnetic resonance (TD ¹ H NMR) is a useful technique to study starch-water interactions by evaluation of molecular mobility and water distribution. The data obtained correspond to changes in starch structure and the state of water during or resulting from processing. When this technique was first applied to starch(-rich) foods, significant challenges were encountered during data interpretation of complex food systems (e.g., cake or biscuit) due to the presence of multiple constituents (proteins, carbohydrates, lipids, etc.). This article discusses the principles of TD ¹ H NMR and the tools applied that improved characterization and interpretation of TD NMR data. More in particular, the major differences in proton distribution of various dough and cooked/baked food systems are examined. The application of variable-temperature TD ¹ H NMR is also discussed as it demonstrates exceptional ability to elucidate the molecular dynamics of starch transitions (e.g., gelatinization, gelation) in dough/batter systems during heating/cooling. In conclusion, TD NMR is considered a valuable tool to understand the behavior of starch and water that relate to the characteristics and/or quality of starchy food products. Such insights are crucial for food product optimization and development in response to the needs of the food industry.

Insights into the gelatinization of potato starch by in situ 1H NMR

The gelatinization of potato starch and the effect of NaCl on starch gelatinization were monitored successfully in situ by 1H NMR spectroscopy. Variable temperature (VT) 1H NMR measurement, from 316 K to 340 K, was conducted on a suspension of potato starch and deuterium water as well as a mixture of potato starch, NaCl and deuterium water. The hydration level of starch was determined with the increase of temperature. In the presence of NaCl, the initial gelatinization temperature of potato starch was decreased from 331 to 328 K. Meanwhile, in situ 1H NMR spectroscopy as a function of time was also carried out to monitor the gelatinization with a time resolution of 90 s per spectrum. Furthermore, the effect of using different processing methods during gelatinization, including varying the temperature or time duration, was investigated in detail. It was confirmed that protons from different groups of starch showed different accessibility for water during hydration of starch granules. In comparison with temperature, gelatinization time as the major factor for reaching complete gelatinization was confirmed. We expect that this research, as a continuing effort to apply NMR spectroscopy for characterizing starch, will pave a new way in the structural elucidation of starch.

Heat Transfer in Cassava Starch Biopolymers: Effect of the Addition of Borax

In recent years, polymer engineering, at the molecular level, has proven to be an effective strategy to modulate thermal conductivity. Polymers have great applicability in the food packaging industry, in which transparency, lightness, flexibility, and biodegradability are highly desirable characteristics. In this work, a possible manner to adjust the thermal conductivity in cassava starch biopolymer films is presented. Our approach is based on modifying the starch molecular structure through the addition of borax, which has been previously used as an intermolecular bond reinforcer. We found that the thermal conductivity increases linearly with borax content. This effect is related to the crosslinking effect that allows the principal biopolymer chains to be brought closer together, generating an improved interconnected network favoring heat transfer. The highest value of the thermal conductivity is reached at a volume fraction of 1.40% of borax added. Our analyses indicate that the heat transport improves as borax concentration increases, while for borax volume fractions above 1.40%, heat carriers scattering phenomena induce a decrement in thermal conductivity. Additionally, to obtain a deeper understanding of our results, structural, optical, and mechanical characterizations were also performed.

Effects of treatment methods on the formation of resistant starch in purple sweet potato

In order to determine the mechanisms underlying resistant starch formation, three treatments were used to prepare resistant starch from purple sweet potato. The resistant starch yield, amylose content, chain length distribution, thermal properties, and crystal structure were determined, and the results were compared with those of unmodified starch. Autoclaving, pullulanase, and pullulanase-autoclaving treatments significantly increased the resistant starch yield, amylose content, shorter amylopectin branch content, and gelatinisation temperatures of native purple sweet potato starch. Resistant starch prepared via pullulanase-autoclaving combination treatment exhibited the highest gelatinisation enthalpy value and the greatest degree of overall thermal stability. X-ray diffraction patterns and Fourier-transform infrared spectra analysis demonstrated that all three treatments transformed the starch crystalline structure from C-type to B-type, and no new groups were generated during the modification process; all the processes were only physical modifications.

Modeling the gelatinization-melting transition of the starch-water system in pulses (lentil, bean and chickpea)

Cooking-induced conversion of starch, the major carbohydrate in pulses, is crucial for the digestibility of the seed. The gelatinization-melting transition of lentil, bean and chickpea starches was studied using Differential Scanning Calorimetry at different temperatures (T values ranged from 20 to 160 °C) and water contents (X from 0.2 to 3 kg kg^-1 db). Gelatinization and melting endotherms were successfully modeled as two desummed Gaussian functions. This modeling enabled to generate the degree of starch conversion for any T and X conditions, a valuable indicator that could be used in predictive cooking models. As previously reported for melting, the temperature of gelatinization was found to depend on moisture in a way that can be modeled using the Flory-Huggins equation. The results suggest that starch undergoes melting transition irrespective of water content. The similar starch conversion diagram for the three pulses suggest that starches have similar thermal behavior.

New Type of Food Processing Material: The Crystal Structure and Functional Properties of Waxy and Non-Waxy Proso Millet Resistant Starches

Resistant starch (RS) is widely used in the food industry because of its ability to regulate and protect the small intestine, but their distinct effects on the structural and functional properties of waxy and non-waxy proso millet starches are not completely understood. The crystalline structure and physicochemical properties of waxy and non-waxy proso millets' starch samples were analyzed after heat-moisture treatment (HMT). The analysis revealed significant differences between the RS of waxy and non-waxy proso millets. The crystal type of proso millets' starch changed from type A to type B + V. The relative crystallinity of the RS of waxy proso millet was better than that of non-waxy proso millet. The gelatinization temperature and thermal stability of RS significantly increased, and the pasting temperature (PTM) of the RS of waxy proso millet was the highest. The water solubility and swelling power of the RS in proso millet decreased, and the viscoelasticity improved. The correlation between the short-range ordered structure of RS and ΔH, and gelatinization properties has a stronger correlation. This study provides practical information for improving the nutritional benefits of waxy and non-waxy proso millet in food applications.

A novel cold-active type I pullulanase from a hot-spring metagenome for effective debranching and production of resistant starch

Pullulanase is a potent enzyme for starch debranching. In this study, a novel type I pullulanase (Pul_M) was identified from the metagenome of a thermal aquatic habitat that exhibits optimal activity of debranching at 40 °C temperature and pH 6.0 to 7.0. More than 50% enzymatic activity was detected at the low temperature of 4 °C, determining it a cold-active type I pullulanase. It was able to efficiently catalyze the hydrolysis of α-1,6-glycosidic linkages in pullulan, with a specific activity of 177 U mg^-1. The results determined Pul_M to be a potential starch debranching biocatalyst, causing a significant increase of about 80% in the apparent amylose content of potato starch. Retrogradation of the debranched starch resulted in the formation of resistant starch 3. The yield of resistant starch was estimated to be about 45%. The resistant starch exhibited higher crystallinity, enhanced heat-stability, and resistance to α-amylase digestion, as compared to native starch.

Morphology, structure, properties and applications of starch ghost: A review

Starch ghost, an insoluble structure of gelatinized starch, plays an important role in the applications of starch. In this review, we summarized the preparation, morphology, structure, properties and applications of starch ghost. The preparation steps of starch ghost include gelatinization, purification and preservation, and many factors influence the yield of starch ghost. The morphology and content of starch ghost can be influenced by many factors like starch resource and amylose content. Ghosts from non-waxy starches are composed of amylopectin with long branch-chains and amylose. These molecules cross-link to each other to reinforce the structure, and tend to form B-type double helix in ghosts from high-amylose starches. Some surface proteins that bind tightly to starch granules are also present in starch ghost. Protein and lipid are thought to have limited effects on the structural stability, but they make a big difference in the morphology of starch ghost. Starch ghost shows a different resistance to amylase among various starches, but it can be further digested under the high shear force. The mechanical, enzymatic hydrolysis and electrochemical properties of starch ghost make it widely used as emulsifier, stabilizer, thickener and starch-based films or gels in food and non-food processing industries.

Insights into the starch gelatinization behavior inside intact cotyledon cells

In this work, detailed structural changes of starch within intact cotyledon cells during differential scanning calorimetry (DSC) heating (water: cells ratio of 4:1, v/w) were investigated. Intact cotyledon cells containing raw starch granules from three legumes were isolated and used as materials, followed by simulate DSC heating up to different designated temperatures based on those gelatinization profiles of cells. The swelling power, solubility and gelatinization transition parameters of raw cells were significantly lower than pure starches. Upon simulate heating, all the starches inside intact cells were considered to maintain more amounts of crystalline and double-helix structures than pure starch counterparts. Meanwhile, the starch granules were not completely disrupted even heating up to 15 °C above conclusion temperature (T_c + 15 °C) for intact cells. The results showed clearly that the presence of intact cell wall exerts significant retarding or restricting effects on the process of starch gelatinization.

Characterizing internal cavity modulation of corn starch microcapsules

Swelling of normal corn starch granules through heating in water leads to enlargement of the starch particles and a corresponding increase in internal cavity size. Through control of the swelling extent, it is possible to tune the size of the internal cavity for the starch microcapsules (SMCs). The swelling extent can be controlled through regulation of the swelling time and the swelling temperature. Since the swelling extent is correlated with particle size and solubility, these aspects may also be controlled. Imaging the SMCs at increasing levels of swelling extent using scanning electron microscopy (SEM) allowed for the internal cavity swelling process to be clearly observed. Brightfield and polarizing light microscopy validated the SEM observations. Confocal laser scanning microscopy provided further validation and indicated that it is possible to load the SMCs with large molecules through diffusion. The highly tunable SMCs are novel microparticles which could have applications in various industries.

Rice starch accumulation at different endosperm regions and physical properties under nitrogen treatment at panicle initiation stage

The quality of rice grain is characterized by the component, structure and physicochemical properties of starch accumulated in endosperm cell. Nitrogen uptake strongly affects rice growth and starch development. In this study, Nangeng 9108 was used to investigated the accumulation of starch in different positions of the endosperm and physical properties of starch under nitrogen treatment of panicle initiation (PI) stage. Compared with the control group (CG), nitrogen treatment group (NTG) featured a higher number of grains per panicle and 1000-grain weight. Nitrogen treatment significantly increased starch accumulation among different regions during endosperm development, which was expressed as central endosperm cells > sub-aleurone cells of abdominal endosperm > sub-aleurone cells of dorsal endosperm. The amyloplast increased by constricting and budding-type division, generated a bead-like structure and derived some vesicles. The particle size of the starch granules obtained from the NTG was smaller and the apparent amylose content was lower than those of the CG, resulting in higher relative crystallinity. Nitrogen treatment promoted double helical components and provided a higher degree of order at short-rang scale for the starch granules. This study indicated that nitrogen significantly affected the accumulation and physicochemical properties of starch in the endosperm.

Preparation of starch-based drug delivery system through the self-assembly of short chain glucans and control of its release property

Here, we report a starch-based carrier system for the delivery of insoluble bioactive compound via oral route. We utilized the intrinsic characteristics of debranched amylopectins that self-assemble into a spherical microparticle in aqueous environment to encapsulate guest molecules. Upon complexation with β-cyclodextrin, the model bioactive compound, curcumin (CUR), was effectively incorporated into the starch microparticles (SMPs) to form CUR-CD@SMPs during the self-assembly reaction. The stability of encapsulated curcumin against environmental stresses, such as photodegradation and chemical oxidation, was greatly enhanced upon encapsulation. The size of CUR-CD@SMPs could be precisely controlled from 0.3 μm to 2 μm by modulating the rate of debranching reaction. A change of release profiles from concave-downward to sigmoidal form was observed upon increasing the size of CUR-CD@SMPs, suggesting that the release site could be controlled by modulating the crystallinity or size of the carrier microparticles.

Effects of experimental warming on physicochemical properties of indica rice starch in a double rice cropping system

To evaluate the actual response of rice starch physicochemical properties to climate warming, a field warming experiment was conducted with four indica rice cultivars using free-air temperature increase (FATI) facility in a double rice cropping system. FATI facility increased rice canopy temperature by 1.4-2.1 °C during the entire growth period. The responses of starch physicochemical properties to experimental warming were basically consistent for both early and late rice. On average, experimental warming increased the starch relative crystallinity, granule average diameter, and amylopectin average chain length by 14.3%, 6.9%, and 2.4%, respectively. These resulted in starch with lower swelling power, water solubility, and pasting viscosity, but higher gelatinization temperatures and gelatinization enthalpy. Our study indicated that experimental warming affected the rice starch physicochemical properties, and would provide some useful information on how to guide the rice starch end use in food and non-food industries under climate warming.

Common buckwheat-resistant starch as a suitable raw material for food production: A structural and physicochemical investigation

Heat-moisture treatment (HMT) of starch is defined as a physical method to change its properties. Compared with maize and potato, starches from common buckwheat (Xinong9976 and Pingqiao2) were isolated and its morphology and physicochemical properties investigated by scanning electron microscope (SEM), X-ray diffraction (XRD), ATR-FTIR analysis, rapid viscosity analyzer (RVA) and differential scanning calorimeter (DSC) were studied before and after HMT. The experimental results showed that there were obvious differences between native starch (NS) and resistant starch (RS) of common buckwheat. HMT altered the A-type crystalline pattern and the degree of short-range order of common buckwheat starches and significantly decreased water solubility, swelling power (70-90 °C), freeze-thaw stability and pasting properties and increased oil and water absorption capacities, light transmittance as well as thermal stability. This study shows that the NS and RS of common buckwheat can be used as the suitable raw materials in food processing.

Rapid Estimation of Parameters for Gelatinization of Waxy Corn Starch

Starch gelatinization is an important process due to the prevalence of starch usage in industries such as cosmetics and food production. In this study, the gelatinization of waxy corn starch (WCS) was investigated with the goal of providing an option for the rapid determination of starch gelatinization characteristics. The procedure used in the study was solely based on differential scanning calorimetry (DSC), which is an established technique for the determination of thermal characteristics of starches. A sequence of experiments was conducted to determine the excess water condition, an estimate of the minimum gelatinization temperature, and gelatinization time. These parameters were found to be ≥65 wt.% water, 75-85 °C, and 10 min, respectively. The estimation of the minimum gelatinization temperature was determined from the thermal properties of the WCS as obtained by DSC. The obtained parameters resulted in complete WCS gelatinization, and, thus, the sequence of procedures used in the study could possibly be used for rapid waxy starch evaluation.

Characterization of amylose and amylopectin fractions separated from potato, banana, corn, and cassava starches

Analytical techniques such HPSEC, DSC, and TGA have been employed for amylose determination in starch samples, though spectrophotometry by iodine binding is most commonly used. The vast majority of these techniques require an analytical curve, using amylose and amylopectin standards with physicochemical properties similar to those found in the original starch. The current study aimed to obtain the amylose and amylopectin fractions from potato, banana, corn, and cassava starches, characterize them, and evaluate their behavior via thermogravimetric curves. Blue amylose iodine complex and HPSEC-DRI methods have obtained high purity amylose and amylopectin fractions. All molecular weights of the obtained amylose and amylopectin fractions were similar to those presented in other reports. Different results were obtained by deconvolution of the amylopectin polymodal distribution. All amyloses presented as semi-crystalline V-type polymorphs, while all amylopectin fractions were amorphous. The T_g of all V_amyloses presented were directly proportional to their respective crystalline index. TGA evaluations have shown that selective precipitation of amylose with 1-butanol strongly changes its thermal behavior. Therefore, the separation procedure used was an ineffective pathway for obtaining standards for thermal studies.

Effects of Controlled Relative Humidity Storage on Moisture Sorption and Amylopectin Retrogradation in Gelatinized Starch Lyophiles

Water plays a significant role in the gelatinization and retrogradation (crystallization) of starch. Amylopectin crystalline regions can adopt several hydrated polymorphic forms; however, reports differ on the migration of water during retrogradation. The objectives of this study were to determine the moisture sorption patterns of gelatinized starch lyophiles during retrogradation in controlled relative humidity (RH) environments and document the amylopectin polymorph(s) formed. Starches from different botanical sources containing A-type and B-type amylopectin polymorphs were studied. Suspensions of starch were heated and then frozen and freeze-dried to make primarily amorphous matrices. Moisture sorption profiles of the dried samples were collected from 5% RH to 95% RH at 25 °C. To capture the retrogradation event, sample masses were also monitored at constant RHs over time (95%, 92.5%, and 90% RH). Powder X-ray diffraction was used to document the physical state of the samples, including the amylopectin polymorph formed upon retrogradation, and differential scanning calorimetry was used to determine glass transition temperatures (T_g s). In all lyophiles, water was first absorbed (mass gain), and if a critical water content was reached (at ≥92.5%RH), sample T_g s dropped below room temperature and concurrent retrogradation and water expulsion (mass loss) occurred, regardless of starch botanical source and whether A- or B-type polymorphs were formed. Overall, retrogradation and water expulsion increased as storage RH increased. These results offer further knowledge into the role of water in amylopectin retrogradation and the relationship among starch type, environmental RH, moisture sorption prior to retrogradation, and water redistribution during retrogradation. PRACTICAL APPLICATION: Starch gelatinization and retrogradation require molecular mobility, which is facilitated by water. Limited retrogradation occurred in lyophiles in the glassy state (90% RH, 25 °C), but increasing the storage RH (to ≥92.5% RH) resulted in increasing amylopectin retrogradation (note: many baked products have water activities in this range). Regardless of starch type (botanical source and amylose content), when the storage RH was high enough, the starch lyophiles first absorbed water, which depressed the T_g below the storage temperature, and then exhibited concomitant retrogradation and water expulsion. The water expelled during amylopectin retrogradation was not (fully) retained in the amorphous starch fraction, which is why samples lost weight. Water leaving the starch matrix during retrogradation could pose challenges for quality, texture, and shelf-life of starch-based products.