Effects of freezing on the condensed state structure of chitin in alkaline solution

Crustacean-inspired chitin-based flexible buffer layer with a helical cross-linked network for bamboo fiber/poly(3-hydroxybutyrate) biocomposites

Marine biological resources, serving as a renewable and sustainable reservoir, holds significant import for the utilization of composite material. Hence, we produced bamboo fiber/poly(3-hydroxybutyrate) (BF/PHB) biocomposites with exceptional performance and economic viability, drawing inspiration from the resilience of crustacean shells. Polyaminoethyl modified chitin (PAECT) was synthesized using the alkali freeze-thaw method and introduced into the interface between BF and PHB to improve interfacial adhesion. The resulting chitin fibers, characterized by their intertwined helical chains, constructed a flexible mesh structure on the BF surface through an electrostatic self-assembly approach. The interwoven PAECT filaments infiltrated the dual-phase structure, acting as a promoter of interfacial compatibility, while the flexible chitin network provided a greater capacity for deformation accommodation. Consequently, both impact and tensile strength of the BF/PHB composites were notably enhanced. Additionally, this flexible layer ameliorated the thermal stability and crystalline properties of the composites. This investigation aimed to leverage the distinctive helical configuration of chitin to facilitate the advancement of bio-reinforced composites.

King crab gills as a new source of chitin/chitosan and protein hydrolysates

This is the first report on the physicochemical properties of chitin obtained from gills of the king crab Paralithodes camtschaticus. In the present study, we investigated the chemical composition of red king crab gills and considered methods of its complex processing to obtain chitin and enzymatic protein hydrolysates. The gills contained approximately 21 % chitin in terms of dry matter. For the first time, the gills of the king crab were investigated as a source of chitin and chitosan. Chitin was isolated from crab gills using chemical and enzymatic methods. The physicochemical properties of chitin and chitosan from the gills were investigated. By performing infrared spectroscopy and X-ray phase analyses, the chitin present in the gills was established to be α-chitin. The physical and chemical properties (degree of deacetylation, molecular weight and crystal structure) of gill chitin and chitosan were absolutely similar to those of crab shell. Crab gills can be used as an additional source of chitin in the integrated processing of king crabs. The yield of chitin from the gills is up to 45 % of the yield of chitin from the crab carapace.

Chitin Hydrogels Prepared at Various Lithium Chloride/N,N-Dimethylacetamide Solutions by Water Vapor-Induced Phase Inversion

Chitin was chemically extracted from crab shells and then dissolved in N,N-dimethylacetamide (DMAc) solvent with lithium chloride (LiCl) at 3, 5, 7, and 10%. The concentrated chitin-DMAc/LiCl solutions were used for the preparation of chitin hydrogels by water vapor-induced phase inversion at 20°C. The coagulation process was investigated while altering the concentration of LiCl in the DMAc solution. The shear viscosity of the chitin solution increased with higher LiCl amounts and decreased when the concentration of LiCl was reduced by adding water to the chitin solution, implying high LiCl concentration delayed the coagulation of chitin solution in the presence of water. The viscoelasticity of the chitin solutions indicated the gel formation intensification was dependent on the dose of LiCl and chitin in the DMAc solution. After the chitin solution was coagulated, the resultant hydrogels had water contents of 387–461% and the tensile strength varied from 285 to 400 kPa when the concentration of LiCl in the hydrogel was adjusted to 3% and 7%, respectively. As for viscoelasticity, the complex modulus of the chitin hydrogels indicated that the increment of the LiCl concentration up to 7% formed the tight hydrogels. Atomic force microscopic (AFM) image revealed the formation of the entanglement network and larger domains of the aggregated chitin segments. However, the hydrogel prepared at 10% LiCl in DMAc solution exhibited weak mechanical properties due to the loose hydrogel networking caused by the strong aggregation of the chitin segments.

A chitosan solution-based vortex-forced matrix solid phase dispersion method for the extraction and determination of four bioactive constituents from Ligustri Lucidi Fructus by high performance liquid chromatography

A simple and efficient sample preparation method to extract four bioactive compounds (echinacoside, specnuezhenide, oleuropein and nuezhenoside G13) from Ligustri Lucidi Fructus was established by vortex-forced matrix solid phase dispersion (VFMSPD) method. Chitosan solution was applied as green eluent in this procedure and Celite AZO was employed as dispersant. High performance liquid chromatography (HPLC) equipped with ultraviolet (UV) detector was used to analyze the target analytes. The best result of the investigation was obtained with Celite AZO as dispersant, sample/ dispersant ratio as 1:1, grinding for 2 min, 1 mL high-viscosity chitosan solution (0.5 mg mL^-1) used as the elution reagent and vortex mixing for 1.5 min. The method exhibit a good linearity for the analytes (r² > 0.999). The absolute recoveries of the four target compounds in Ligustri Lucidi Fructus ranged from 90.7% to 98.8% and the relative recoveries of the target compounds ranged from 99.2% to 102% (RSD ≤ 3.4%), which were obtained by the final optimization method. Consequently, the newly developed chitosan solution-based vortex-forced matrix solid phase dispersion (MSPD) combined with HPLC could be efficiently applied to extract and analyze the target compounds in Ligustri Lucidi Fructus samples.

Composition and content analysis of fluoride in inorganic salts of the integument of Antarctic krill (Euphausia superba)

Ash of Antarctic krill integument (AAKI) was prepared by sintering the integument at 550°C under air atmosphere for 4 hours, and its composition was analyzed by X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR) and electron dispersive spectroscopy (EDS). XRD results showed that the major phase in AAKI was ascribed to apatite. Besides, it was noticed that the (300) peak of AAKI shifted to 33.07°, which was coincident with that of fluorapatite (FA). The FTIR results confirmed the presence of phosphate ions, and the absence of -OH. The EDS results confirmed the presence of Ca, P, O and F elements in the ash sample. The content of FA in the ash was determined to be 50.4%, and the proportion of fluorine in the form of FA to the total fluorine in the integument was 40.5%. Based on the XRD, FTIR and EDS results, it can be concluded that FA was the main form of fluoride in the integument of Antarctic krill.

Butylglyceryl Pectin Nanoparticles: Synthesis, Formulation and Characterization

Pectin is a polysaccharide with very good gel forming properties that traditionally has found important applications in foods and pharmaceutical industries. Although less studied, chemical modifications of pectin leading to a decrease in its hydrophilicity can be useful for the development of novel drug carriers. To this aim, butylglyceryl pectins (P-OX4) were synthesized via functionalization with n-butylglycidyl ether and subsequently formed into nanoparticles. Chromatographic, spectroscopic, and thermal analytical methods were employed to characterize the novel butylglyceryl pectins (P-OX4) obtained, prior to their formulation into nanoparticles via nanoprecipitation. Nuclear magnetic resonance (NMR) and Fourier transform infrared (FT-IR) spectroscopy confirmed a degree of modification in these materials in the range 10.4-13.6%, and thermal stability studies indicated an increase in both the thermal decomposition onset and glass transition temperature values (compared to those of the original pectin). An increase in the molecular weight and a decrease in the viscosity of P-OX4, when compared to the starting material, were also observed. The resulting nanoformulations were investigated in terms of particle morphology, size and stability, and it was found that particles were roughly spherical, with their size below 300 nm, and a negative zeta potential (-20 to -26 mV, indicating good stability). Having demonstrated the ability to load Doxorubicin at the level of 10%, their potential in drug delivery applications warrants further investigations.

Characterization and antibacterial mechanism of poly(aminoethyl) modified chitin synthesized via a facile one-step pathway

This work aims to synthesize poly(aminoethyl) modified chitin (PAEMC) and ascertain its antibacterial activity and mechanism. FTIR and ¹H NMR results proved aminoethyl moieties were grafted to C6OH and C3OH on chitin backbone in the form of polymerization. XRD and TG/DTG analyses manifested its well-defined crystallinity and thermostability. PAEMC, with average molecular weight (MW) of 851.0 kDa, degree of deacetylation (DD) of 27.95%, and degree of substitution (DS) of 1.77, had good solubility in aqueous solutions over the pH range of 3-12, and also possessed high antimicrobial activity against Staphylococcus epidermidis, Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Bacillus proteus, and Klebsiella pneumoniae, commonly causing chronic wound infections. Nucleic acid release, protein leakage, increased inner membrane permeability, and decreased cell surface hydrophobicity implied bacterial cytomembranes were substantially compromised in the presence of PAEMC. Microscopically, PAEMC visually perturbed bacteria, illustrating deformed and even collapsed morphologies. Overall, PAEMC possessed good solubility, effectively destroyed bacteria via a membrane damage mechanism, and might serve as an antibacterial agent for treatments of chronic wound infections.

Synthesis and characterisation of chitin from periwinkle (Tympanotonus fusatus (L.)) and snail (Lissachatina fulica (Bowdich)) shells

This study characterizes chitin extracted from bio-sources of snail and periwinkle using varied combinations of acid and alkali concentrations. A three level factorial design of experiment with alkali and acid concentrations was used. FTIR, XRD and SEM were used to investigate the structural changes after treatments. Results reveal that both alkali and acid concentrations significantly affect the development of the functional groups and their intensities in the extracted chitin. A certain combination of concentration of acid and alkali can be used to obtain chitin with high degree of order (Crystallinity Index (CrI)>0.9) and a degree of de-acetylation (DD>50%). This results in combined high crystallinity and degree of de-acetylation. The study also established that certain combination of acid and alkali concentrations could lead to alpha to beta transformation in chitin structure.

Thermal, structural and acetylation behavior of snail and periwinkle shells chitin

This article reports a successful removal of CaCO₃ from snail and periwinkle shells for the purpose of producing high quality chitin for possible application as bio-fillers in bone fixation materials. Experiment was designed with varying concentrations of acid and alkali for demineralization, deproteinization and deacetylation of the samples. Thermal characteristics, morphology, degree of de-acetylation, crystalline structure and hydrogen bonding characteristics of the extracted chitin were examined. Infra-red spectra, thermogravimetric analysis and X-ray diffraction patterns show that demineralization with 1.7 M HCl led to a successful removal of CaCO₃. Subsequent deproteinization and deacetylation with 1.2 M NaOH led to a development of chitosan having a degree of deacetylation of 77 and 60% for periwinkle and snail shells, respectively. Generally, all results show that different treatments led to different chitin structure and consequently different properties.

Synthesis and thermal gelation of hydroxypropyl chitin

Fully water-soluble and thermal gellable hydroxypropyl chitin was synthesized by the modification of chitin with propylene oxide in aqueous NaOH solution, a green and good solvent to chitin.

Novel glucosamine hydrochloride-rectorite nanocomposites with antioxidant and anti-ultraviolet activity

In this study, an attempt was made to prepare novel D-glucosamine hydrochloride-rectorite (DGH-REC) nanocomposites with improved antioxidant and anti-ultraviolet activity via the solution-intercalation method. The structure and morphology of DGH-REC nanocomposites were characterized by XRD, TEM, (13)C CP/MAS NMR, FT-IR, XPS and SEM. The results showed that the interlayer distance of REC was enlarged after intercalation of DGH; the largest value reached 11.76 nm, and in this case exfoliation of the REC layer was observed. Moreover, most strong crystals of DGH were greatly disrupted while two other weak crystals of DGH were stronger after intercalation of DGH into REC. More importantly, it was found that DGH-REC nanocomposites showed pronounced antioxidant activity, in contrast with DGH, and the nanocomposites had anti-ultraviolet capacity, which was not observed in DGH. Furthermore, the nanocomposites did not show apparent cytotoxicity. Therefore, DGH-REC nanocomposites have great potential in health or functional food application as compared to DGH.

Chitin

A comprehensive profile of chitin with 61 references is reported. A full description including nomenclature, formulae, elemental analysis, and appearance is included. Methods of preparation for chitin and its derivative, such as chitosan, are discussed. Physical properties, analytical methods, uses and applications, stability, biodegradability, and toxicity of chitin are also reviewed.