Effect of salts on pasting, thermal, and rheological properties of rice starch in the presence of non-ionic and ionic hydrocolloids

Incorporation of cross-linked/acetylated tapioca starches on the gelling properties, rheological behaviour, and microstructure of low-salt myofibrillar protein gels: Perspective on phase transition

This study investigated the gelling properties, rheological behaviour, and microstructure of heat-induced, low-salt myofibrillar protein (MP) gels containing different levels (2%, 4%, 6%, and 8%, w/w) of cross-linked (CTS) or acetylated (ATS) tapioca starch. The results indicated that either CTS or ATS significantly enhanced the gel strength and water-holding capacity of low-salt MP gels (P < 0.05), an outcome verified by the rheological behaviour test results under different modes. Furthermore, iodine-staining images indicated that the MP-dominated continuous phase gradually transited to a starch-dominated phase with increasing CTS or ATS levels, and 4% was the critical point for this phase transition. In addition, hydrophobic interactions and disulphide bonds constituted the major intermolecular forces of low-salt MP gels, effectively promoting phase transition. In brief, modified tapioca starches possess considerable potential application value in low-salt meat products.

Incorporating ions during thermal processing tailors the microstructure and practical features of rice starch/anthocyanin binary system

Understanding the interplay among salt ions, anthocyanin and starch within food matrices under thermal conditions is important for the development of starch-based foods with demanded quality attributes. However, how salt ions presence influences the microstructure and properties of starch/anthocyanin binary system remains largely unclear. Herein, indica rice starch (IRS) and rice anthocyanin (RA) were used to construct an IRS-RA binary system, with thermal treatment under different concentrations of Na+ (10-40 mM) and types of salt ions (Na+ and Ca2+). The incorporation of salt ions induced the formation of a porous gel matrix, and destroyed the hydrogen bond between starch and anthocyanin through electrostatic interactions, reducing the storage modulus and radius of gyration of the binary system, and increasing the relative crystallinity (from 1.08 % to 1.51 % (20 mM Na+) and 1.69 % (20 mM Ca+)) of the IRS-RA binary system at 90 °C. Also, the DPPH radical scavenging ability of the binary system at 90 °C was enhanced upon incorporating salt ions (0.93 for Na+ condition and 0.94 for Ca2+ condition at 20 mM ion concentration). It is noteworthy that Ca2+ inclusion had more significant effects than the case for Na+ presence, presumably due to the increased charge density.

Investigation of the role of sodium chloride on wheat starch multi-structure, physicochemical and digestibility properties during X-ray irradiation

In this paper, different NaCl content was added to wheat starch and then subjected to X-ray irradiation to investigate the effect of salt on starch modification by irradiation. The results showed that the degradation of wheat starch intensified with the increase in irradiation dose. When irradiated at the same dose, wheat starch with sodium chloride produced shorter chains, lower molecular weight and amylose content, and higher crystallinity, solubility, and resistant starch than wheat starch without sodium chloride. The energy generated by X-rays dissociating sodium chloride caused damage to the glycoside bonds of the starch molecule. With a further increase in the mass fraction of NaCl, the hydrogen bonds of the starch molecules were broken, and the double helix structure was depolymerized, which exacerbated the extent of irradiation-modified wheat starch. At the same time, starch molecules will be rearranged to form a more stable structure.

Effect of ultrasound/CaCl2 co-treatment on the microstructure, gelatinization, and film-forming properties of high amylose corn starch

The effect of ultrasound/CaCl2 co-treatment on aggregation structure, thermal stability, rheological, and film properties of high amylose corn starch (HACS) was investigated. The scanning electron microscopy (SEM) images revealed the number of starch fragments and malformed starch granules increased after co-treatment. The differential scanning calorimetry (DSC) results showed the co-treated HACS got a lower gelatinization temperature (92.65 ± 0.495 °C) and enthalpy values (ΔH, 4.14 ± 0.192 J/g). The optical microscope images indicated that lesser Maltase crosses were observed in co-treated HACS. The results of X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) indicated ultrasound influenced the compactness of amorphous zone and CaCl2 damaged the crystalline region of HACS granules. Additionally, the rheology properties of HACS dispersion demonstrated the apparent viscosity of co-treated dispersion increased as the ultrasound time prolonged. The mechanical strength and structural compactness of HACS films were improved after ultrasound treatment. The mechanism of ultrasound/CaCl2 co-treatment improved the gelatinization and film-forming ability of HACS was that (i) ultrasound wave loosened the HACS granules shell, promoted the treatment of CaCl2 on HACS granules, and (ii) ultrasound wave improved the uniform distribution of HACS dispersion, increased the interaction between CaCl2 and starch chains during the process of film-forming.

Controlling sodium chloride concentration modulates the supramolecular structure and sol features of wheat starch-acetylated starch binary matrix

The sol performance of wheat starch (WS) matrix incorporating acetylated starch (AS) is crucial for the processing and quality features of wheat products. From a supramolecular structure view, how regulating salt (sodium chloride) concentration modulates the sol features, e.g., pasting, zero-shear viscosity (ZSV) and thixotropy of WS-AS binary matrix was explored. Compared to the salt-free counterpart, the saline matrices exhibited a delayed pasting profile and a decreased viscoelasticity. Thereinto, the sol at 0.02 M NaCl exhibited the smallest ZSV (23,710 Pa·s) and the greatest in-shear recovery ratio (33.7 %). Such variations could be attributed to the weakened coil-helix, nematic-smectic and isotropy-anisotropy transitions from a side-chain liquid-crystalline perspective. Meanwhile, the correlation length (ξ) and radius of gyration (Rg) obtained from small angle X-ray scattering analysis were increased by 5.2 and 9.6 Å respectively, which disclosed a restrained entanglement and an enhanced chain mobility. These results would provide a reference for the design of fluid/semisolid products with optimized qualities.

Natural gums and their derivatives based hydrogels: in biomedical, environment, agriculture, and food industry

The hydrogels based on natural gums and chemically derivatized natural gums have great interest in pharmaceutical, food, cosmetics, and environmental remediation, due to their: economic viability, sustainability, nontoxicity, biodegradability, and biocompatibility. Since these natural gems are from plants, microorganisms, and seaweeds, they offer a great opportunity to chemically derivatize and modify into novel, innovative biomaterials as scaffolds for tissue engineering and drug delivery. Derivatization improves swelling properties, thereby developing interest in agriculture and separating technologies. This review highlights the work done over the past three and a half decades and the possibility of developing novel materials and technologies in a cost-effective and sustainable manner. This review has compiled various natural gums, their source, chemical composition, and chemically derivatized gums, various methods to synthesize hydrogel, and their applications in biomedical, food and agriculture, textile, cosmetics, water purification, remediation, and separation fields.

Incorporation of Lepidium perfoliatum seed gum into wheat starch affects its physicochemical, viscoelastic, pasting and freeze-thaw syneresis properties

This study aimed to investigate the influence of incorporating Lepidium perfoliatum seed gum (LPSG) into wheat starch (WS) at various mixing ratios on its FTIR, DSC, steady and dynamic rheological properties, pasting attributes, syneresis, and particle size distributions characteristics. The interaction between WS and LPSG was purely based on hydrogen-bonding. It was found that the onset (To) and peak (Tp) temperatures of the LPSG-rich mixtures increased by 10 % and 8 %, respectively, while the enthalpy (ΔH) decreased by 70 % compared to WS. A higher LPSG ratio led to a decrease in the frequency dependence of storage modulus (G'), as well as an increase in the pseudoplasticity of the mixtures. The in-shear structural recovery test showed that the rate of recovery (R, %) increased with an increasing LPSG ratio. The pasting results demonstrated that the 9/1 ratio had the highest final viscosity and the lowest relative breakdown. Applying 1 to 5 freeze-thaw cycles resulted in a 50 % to 70 % decrease in syneresis for the 9/1 mixing ratio in comparison to WS, respectively. The incorporation of LPSG into WS resulted in higher static and dynamic magnitudes of yield stress, as well as an increase in particle size when compared to WS.

Effects of zucchini polysaccharide on pasting, rheology, structural properties and in vitro digestibility of potato starch

Zucchini polysaccharide (ZP) has a unique molecular structure and a variety of biological activities. This study aimed to evaluate the effects of ZP (1, 2, 3, 4 and 5 %, w/w) on the properties of potato starch (PS), including pasting, rheological, thermodynamic, freeze-thaw stability, micro-structure, and in vitro digestibility of the ZP-PS binary system. The results showed that the appearance of ZP significantly reduced the peak, breakdown, final and setback viscosity and prolonged the pasting temperature of PS, whereas increased the trough viscosity. The tests of rheological showed that ZP had a damaging effect on PS gels. Meanwhile, the results of thermodynamic and Fourier transform infrared exhibited that the presence of ZP significantly retarded the retrogradation of PS, especially at a higher levels. The observation of the microstructure exhibited that ZP significantly altered the microscopic network structure of the PS gels, and ZP reduced the formation of the gel structure. Besides, ZP postponed the retrogradation process of PS gels. Moreover, ZP weakened the freeze-thaw stability of the PS gel. Furthermore, ZP also can decrease the digestibility and estimated glycemic index (eGI) value of PS from 86.04 % and 70.89 to 77.67 % and 65.22, respectively. Simultaneously, the addition of ZP reduced the rapidly digestible starch content (from 25.09 % to 16.59 %) and increased the slowly digestible starch (from 24.99 % to 26.77 %) and resistant starch content (from 49.92 % to 56.64 %). These results have certain guiding significance for the application of ZP in starch functional food.

Effects of NaCl on the Physical Properties of Cornstarch-Methyl Cellulose Blend and on Its Gel Prepared with Rice Flour in a Model System

This study investigated the impact of NaCl on the physical properties of cornstarch-methyl cellulose (CS-MC) mixtures and their gels prepared with rice flour in a model system. Opposite trends were observed, showing that NaCl led to decreased viscosity of the CS-MC mixtures (liquid-based), whereas a more stable and robust structure was observed for the rice-flour-added gels (solid-based) with the addition of NaCl. The interference of NaCl with the CS-MS blend's ability to form a stable gel network resulted in a thinner consistency, as the molecules of the CS-MS blend may not bind together as effectively. On the contrary, NaCl showed the potential to enhance the protein network within CS-MC gels prepared with rice flour, thereby contributing to an augmentation in the stability or firmness of the cooked gels. Careful utilization of NaCl to optimize the physical properties of the CS-MC blends, as well as the gels based on rice flour, should be performed.

A review of starch swelling behavior: Its mechanism, determination methods, influencing factors, and influence on food quality

Swelling behavior involves the process of starch granules absorbing enough water to swell and increase the viscosity of starch suspension under hydrothermal conditions, making it one of the important aspects in starch research. The changes that starch granules undergo during the swelling process are important factors in predicting their functional properties in food processing. However, the factors that affect starch swelling and how swelling, in turn, affects the texture and digestion characteristics of starch-based foods have not been systematically summarized. Compared to its long chains, the short chains of amylose easily interact with amylopectin chains to inhibit starch swelling. Generally, reducing the swelling of starch could increase the strength of the gel while limiting the accessibility of digestive enzymes to starch chains, resulting in a reduction in starch digestibility. This article aims to conduct a comprehensive review of the mechanism of starch swelling, its influencing factors, and the relationship between swelling and the pasting, gelling, and digestion characteristics of starch. The role of starch swelling in the edible quality and nutritional characteristics of starch-based foods is also discussed, and future research directions for starch swelling are proposed.

Starch modification through its combination with other molecules: Gums, mucilages, polyphenols and salts

Apart from its non-toxicity, biocompatibility and biodegradability, starch has demonstrated eminent functional characteristics, e.g., forming well-defined gels/films, stabilizing emulsions/foams, and thickening/texturizing foods, which make it a promising hydrocolloid for various food purposes. Nonetheless, because of the ever-increasing range of its applications, modification of starch via chemical and physical methods for expanding its capabilities is unavoidable. The probable detrimental impacts of chemical modification on human health have encouraged scientists to develop potent physical approaches for starch modification. In this category, in recent years, starch combination with other molecules (i.e., gums, mucilages, salts, polyphenols) has been an interesting platform for developing modified starches with unique attributes where the characteristics of the fabricated starch could be finely tuned via adjusting the reaction parameters, type of molecules reacting with starch and the concentration of the reactants. The modification of starch characteristics upon its complexation with gums, mucilages, salts, and polyphenols as common ingredients in food formulations is comprehensively overviewed in this study. Besides their potent impact on physicochemical, and techno-functional attributes, starch modification via complexation could also remarkably customize the digestibility of starch and provide new products with less digestibility.

Understanding gluten-free bread ingredients during ohmic heating: function, effect and potential application for breadmaking

Due to the absence of gluten, several challenges arise during gluten-free (GF) bread baking, affecting the mid-and-end-product quality. The main approach to overcome this issue is to combine certain functional ingredients and additives, to partially simulate wheat bread properties. In addition, the optimization of the baking process may contribute to improved product quality. A recent and very promising alternative to conventional baking is the use of ohmic heating (OH). Due to its volumetric and uniform heating principle, crumb development during baking and consequently bread volume is improved, which enhances the overall GF bread quality. Depending on the GF formulation, critical factors such as the electrical conductivity and viscosity of the batter may vary, which have a significant effect on the OH process performance. Therefore, this review attempts to provide a deeper understanding of the functionality of GF bread ingredients and how these may affect critical parameters during the OH processing.

Effects of proanthocyanidins on the pasting, rheological and retrogradation properties of potato starch

BACKGROUND

Proanthocyanidins (PAS) were complexed with potato starch (PS) to prepare polyphenol-starch complexes. The pasting, rheological and retrogradation properties of the complexes were investigated.

RESULTS

The addition of PAS markedly affected the pasting, rheological and retrogradation properties of PS, especially at a concentration of 5% (w/w). Rapid viscosity analysis indicated that PAS significantly changed the viscosity, breakdown and setback value of PS. The rheological results showed that PAS decreased the flow behavior index and consistency coefficient, but increased the viscoelasticity of PS. Differential scanning calorimetry and X-ray diffraction indicated that PAS delayed the retrogradation of PS. Furthermore, scanning electron microscopy indicated that the morphologies of retrograded PS gels were greatly altered to a less compact structure with the presence of PAS. Moreover, Fourier transform infrared spectroscopy elucidated that PAS interacted with PS via a noncovalent interaction, and inhibited the retrogradation of PS.

CONCLUSIONS

The findings suggested that supplementing PS with PAS might be an effective and convenient method for modifying the physicochemical properties of PS. © 2021 Society of Chemical Industry.

Late-Maturity Alpha-Amylase in Wheat (Triticum aestivum) and Its Impact on Fresh White Sauce Qualities

When wheat experiences a cold-temperature ‘shock’ during the late stage of grain filling, it triggers the abnormal synthesis of late-maturity α-amylase (LMA). This increases the enzyme content in affected grain, which can lead to a drastic reduction in falling number (FN). By commercial standards, a low FN is taken as an indication of inferior quality, deemed unsuitable for end-product usage. Hence, LMA-affected grains are either rejected or downgraded to feed grade at the grain receiving point. However, previous studies have found no substantial correlation between low FN-LMA and bread quality. The present study extends previous investigations to semi-solid food, evaluating the physical quality of fresh white sauce processed from LMA-affected flour. Results show that high-LMA flours had low FNs and exhibited poor pasting characteristics. However, gelation occurred in the presence of other components during fresh white sauce processing. This demonstrates that LMA-affected flours may have new applications in low-viscosity products.

Multiscale structural changes and retrogradation effects of addition of sodium alginate to fermented and native wheat starch

This work investigated the changes in multi-scale structure and retrogradation properties of native wheat starches (NS) modified by sodium alginate (AG) with and without fermentation. AG adhered on the surface of NS granules and fermentation promoted the adhesions. Compared with the addition of AG alone, dual modification by fermentation and AG together showed a greater effect to increase the weight-average molecular weight and reduce the relative crystallinity and double helix degree of NS. Small angle X-ray diffraction results showed a significant increase in amorphous region with dual modification compared with AG alone. Additionally, dual modification greatly slowed the increase of relative crystallinity and the enthalpy (ΔH) of NS paste during storage. The results of this study suggest that dual modification is a more effective approach to modify structures and properties of wheat starch than single AG treatment, and suggest its potential industrial application in starch-based foods.

Effects of xanthan and konjac gums on pasting, rheology, microstructure, crystallinity and in vitro digestibility of mung bean resistant starch

The effects of different concentrations of xanthan and konjac gums on the pasting, rheological properties, microstructure, crystallinity, and digestibility of mung bean resistant starch (MRS) were investigated. Based on the results of pasting properties, the adjunction of gums increased the peak, breakdown, and final viscosities of resistant starch. Compared with resistant starch, the addition of gum significantly increased the K value and dynamic moduli (G', G") of MRS with increasing gum concentration. This finding indicates that the mixtures had higher viscoelasticity. Mixtures with xanthan gum of MRS had larger starch particle compared with MRS, as revealed by SEM. All starches showed B and V-type crystallinity with high crystallinity. MRS had the highest summation of resistant starch (RS) and slowly digestible starch (SDS) of 71.89%. MRS had the lowest hydrolysis rate, which obviously decreased from 71.89% to 57.71% with increasing konjac gum from 0 to 0.30%.

Structural, rheological, pasting and textural properties of granular cold water swelling maize starch: Effect of NaCl and CaCl2

In this study granular cold water swelling (GCWS) starches were subjected to 0, 50, 100, 150 and 200 mM NaCl and CaCl₂ and their effects on microstructure, rheological, pasting, and textural properties were determined. SEM images revealed that NaCl decreased the thickness of GCWS starch paste cell walls while, CaCl₂ resulted in formation of denser and more homogenous pastes. The atomic force microscopy (AFM) results showed that NaCl increased the surface wrinkles of starch granules but CaCl₂ reduced the roughness of starch granule surface. Zeta potential measurements showed both salts reduced the negative values and CaCl₂ was more effective than NaCl. The steady shear measurements showed the shear thinning behavior of the samples. Starch pastes incorporated with NaCl had lower consistency coefficient (K) and apparent viscosity. However, the CaCl₂ containing samples were more viscous. The pasting and textural parameters were increased by the increase of CaCl₂ but decreased with NaCl.

Use of Response Surface Methodology to Investigate the Effects of Sodium Chloride Substitution with Potassium Chloride on Dough’s Rheological Properties

Bakery products are one of the main sources of dietary sodium intake of the world’s population. During the last decade, sodium intake has increased worldwide and nowadays the World Health Organization recommends reducing sodium intake by up to 2 g Na/day. KCl is the leading substitute for reducing sodium in bakery products. Therefore, the main purpose of our study was to investigate the impact of sodium reduction on dough’s rheological properties by reformulating the dough recipe using two types of salts, namely NaCl and KCl, with different amounts added to wheat flour. In order to establish their combination for obtaining the optimum rheological properties of dough, the response surface methodology (RSM) by the Design Expert software was used. The effect of combined NaCl and KCl salts were made on mixing, viscometric and fermentation process by using Farinograph, Extensograph, Amylograph and Rheofermentometer devices. On dough’s rheological properties, KCl and NaCl presented a significant effect (p < 0.01) on water absorption, stability, energy, dough resistance to extension, falling number and all Rheofermentometer-analyzed values. Mathematical models were achieved between independent variables, the KCl and NaCl amounts, and the dependent ones, dough rheological values. The optimal values obtained through RSM for the KCl and NaCl salts were of 0.37 g KCl/100 g and 1.31 g NaCl/100 g wheat flour, which leads to a 22% replacement of NaCl in the dough recipe.

Interaction between rice starch and Mesona chinensis Benth polysaccharide gels: Pasting and gelling properties

Interactions between starch and non-starch polysaccharides are very important for predicting and controlling the structure and function of starch-.based products. In this study, the effects of Mesona chinensis Benth polysaccharide (MCP) on the pasting, rheological, structural, and water mobility properties of rice starch (RS)-MCP gels were evaluated. Results indicated that MCP can increase the pasting viscosity, and gel properties of RS-MCP gels. Rheological results showed that RS-MCP gels exhibited shear-thinning behavior and that MCP can enhance the viscoelasticity of RS-MCP gels. Fourier-transform infrared spectra results indicated no covalent interaction between RS and MCP, and MCP could increase the degree of short-range order of RS-MCP gels. MCP also enhanced the water-retention capacity of RS-MCP gels. Scanning electron microscopy results suggested that MCP could decrease the pore sizes of RS gels and the microstructure of RS gels became more ordered at 0.1 % concentration of MCP. The results suggested that the amylose and MCP molecules interacted through hydrogen bonds and electrostatic forces, which enhanced the gelling properties of RS-MCP gels. Overall, this study shows the potential applications of MCP, and also provides the theoretical basis of interactions in starch-hydrocolloids systems.

Ultrasound-assisted weak-acid hydrolysis of crystalline starch nanoparticles for chemical enhanced oil recovery

Ascorbic acid was used for the first time to synthesize crystalline starch nanoparticles (CSNP). The physical properties of the CSNP were investigated. Rheological properties of the crystalline starch nanofluid (CSNF) were compared with native cassava starch (CS) and commercial polymer xanthan. Interfacial properties of the CSNF at the interface of oil and water (O/W) were investigated at different concentrations and temperatures. Wettability alteration efficiency of CSNF on oil-wet sandstone surface was investigated using the sessile drop method. Core flooding experiment was conducted at reservoir conditions. The methods were effective in producing spherical and polygonal nanoparticles with a mean diameter of 100 nm and increased in crystallinity of 7%. Viscosity increased with increase in surface area and temperature of the CSNF compared to a decrease in viscosity as the temperature increases for xanthan. Interfacial tension (IFT) decreased with increase in concentration of CSNF, electrolyte and temperature. The results show that CSNF can change the wettability of sandstone at low concentration, high salinity and elevated temperature. Pressure drops data shows stability of CSNF at 120 °C. The formation of oil bank was enough to increase oil recovery by 23%.

Self-Assembled Carbohydrate Polymers for Food Applications: A Review

The self-assembled natural and synthetic polymers are booming. However, natural polymers obtained from native or modified carbohydrate polymers (CPs), such as celluloses, chitosan, glucans, gums, pectins, and starches, have had special attention as raw material in the manufacture of self-assembled polymer composite materials having several forms: films, hydrogels, micelles, and particles. The easy manipulation of the architecture of the CPs, as well as their high availability in nature, low cost, and being sustainable and green polymers have been the main positive points in the use of them for different applications. CPs have been used as building blocks for composite structures, and their easy orientation and ordering has given rise to self-assembled CPs (SCPs). These macromolecules have been little studied for food applications. Nonetheless, their research has grown mainly in the last 5 years as encapsulated food additive wall materials, food coatings, and edible films. The multifaceted properties (systems sensitive to pH, temperature, ionic strength, types of ions, mechanical force, and enzymes) of these devices are leading to the development of advanced food materials. This review article focused on the analysis of SCPs for food applications in order to encourage other research groups for their preparation and implementation.

Fortified Blended Food Base: Effect of Co-Fermentation Time on Composition, Phytic Acid Content and Reconstitution Properties

Dehydrated blends of dairy-cereal combine the functional and nutritional properties of two major food groups. Fortified blended food base (FBFB) was prepared by blending fermented milk with parboiled wheat, co-fermenting the blend at 35 °C, shelf-drying and milling. Increasing co-fermentation time from 0 to 72 h resulted in powder with lower lactose, phytic acid and pH, and higher contents of lactic acid and galactose. Simultaneously, the pasting viscosity of the reconstituted base (16.7%, w/w, total solids) and its yield stress (σ0), consistency index (K) and viscosity on shearing decreased significantly. The changes in some characteristics (pH, phytic acid, η120) were essentially complete after 24 h co-fermentation while others (lactose, galactose and lactic acid, pasting viscosities, flowability) proceeded more gradually over 72 h. The reduction in phytic acid varied from 40 to 58% depending on the pH of the fermented milk prior to blending with the parboiled cereal. The reduction in phytic acid content of milk (fermented milk)-cereal blends with co-fermentation time is nutritionally desirable as it is conducive to an enhanced bioavailability of elements, such as Ca, Mg, Fe and Zn in milk-cereal blends, and is especially important where such blends serve as a base for fortified-blended foods supplied to food-insecure regions.

Effect of CaCl2 pre-treatment on the succinylation of potato starch

Potato starch was pre-treated with CaCl₂ solutions prior to modification with octenyl succinic anhydride (OSA). Starch pre-treated with 1.0 M CaCl₂ showed higher degree of substitution (DS) and reaction efficiency (RE) on OSA modification, whereas pre-treatment with CaCl₂ solutions at 0.05 M, 0.1 M and 0.5 M had no effect on DS and RE. CaCl₂ pre-treatment decreased the swelling power, paste clarity, peak viscosity (PV), breakdown (BD) and some textural parameters of potato starch, with the effects being greater at higher concentrations of CaCl₂. Pre-treatment with 1.0 M CaCl₂ caused a small disruption to starch crystallinity and granule morphology. OSA modification significantly decreased the textural parameters, PV, BD, relative crystallinity, swelling power, gelatinization temperatures and enthalpy of potato starch, but it increased the paste clarity and emulsifying activity. OSA-1.0 M-starch showed improved functional properties over OSA-starch, indicating that CaCl₂ pre-treatment provides advantages for improving the functional characters of succinylated starch.