Characterization of gelification of chitosan solutions by dynamic light scattering

Chitosan Nanoparticles Modified by Anredera cordifolia (Ten.) Steenis Leaf Extract for Enhancement of Azithromycin Encapsulation Efficiency and Loading Capacity: In vitro Drug Release Study

The encapsulation efficiency and the loading capacity of azithromycin (AZI) were succesfully enhanced by modifying chitosan nanoparticle (NCh) with Anredera cordifolia leaf extract (ACLE), as demonstrated in this study. The prominent secondary metabolites in ACLE could establish a new chemical bonds with NCh's amino groups and partly improved the hydrophobicity of NCh, which leads to excellent AZI encapsulation efficiency and loading capacity of 95.24 ± 1.30% and 55.74 ± 1.03%, respectively. TEM characterization demonstrated that the AZI-loaded ACLE-NCh nanoparticles were uniformly distributed with a particle size of 24.6 ± 2.9 nm. According to the result of in vitro drug release studies, AZI-loaded ACLE-NCh releases 1.12 ± 0.33% at a pH of 1.6 for 2 h, 82.05 ± 2.26% at a pH of 6.8 for 6 h, and 93.44 ± 1.94% at a pH of 7.4 for 24 h. It is remarkable that the encapsulation activityu of AZI-loaded ACLE-NCh is more effective due to the better interaction between NCh and AZI resulting from the increased hydrophobicity of modified NCh. Moreover, this work provides novel findings on the significant contribution of NCh modified by plant extracts, which has the potential as a carrier for azithromycin.

Covalently and ionically, dually crosslinked chitosan nanoparticles block quorum sensing and affect bacterial cell growth on a cell-density dependent manner

In our efforts to improve the quality and stability of chitosan nanoparticles (NPs), we describe here a new type of chitosan NPs dually crosslinked with genipin and sodium tripolyphosphate (TPP) that display quorum quenching activity. These NPs were created using a simplified and robust procedure that resulted in improved physicochemical properties and enhanced stability. This procedure involves the covalent crosslinking of chitosan with genipin, followed by the formation of chitosan NPs by ionic gelation with TPP. We have optimized the conditions to obtain genipin pre-crosslinked nanoparticles (PC-NPs) with positive ς-potential (~ +30 mV), small diameter (~130 nm), and low size distributions (PdI = 0.1-0.2). PC-NPs present physicochemical properties that are comparable to those of other dually crosslinked chitosan NPs fabricated with different protocols. In contrast to previously characterized NPs, however, we found that PC-NPs strongly reduce the acyl homoserine lactone (AHL)-mediated quorum sensing response of an Escherichia coli fluorescent biosensor. Thus, PC-NPs combine, in a single design, the stability of dually crosslinked chitosan NPs and the quorum quenching activity of ionically crosslinked NPs. Similar to other chitosan NPs, the mode of action of PC-NPs is consistent with the existence of a "stoichiometric ratio" of NP/bacterium, at which the positive charge of the NPs counteracts the negative ς-potential of the bacterial envelope. Notably, we found that the time of the establishment of the "stoichiometric ratio" is a function of the NP concentration, implying that these NPs could be ideal for applications aiming to target of bacterial populations at specific cell densities. We are confident that our PC-NPs are up-and-coming candidates for the design of efficient anti-quorum sensing and a new generation antimicrobial strategies.

Formation and relaxation kinetics of starch-particle complexes

The formation and relaxation kinetics of starch-particle complexes were investigated in this study. The combination of cationic nanoparticles in suspension and anionic starch in solution gave rise to aggregate formation which was studied by dynamic light scattering, revealing the initial adsorption of the starch molecules on the particle surface. By examining the stability ratio, W, it was found that even in the most destabilized state, i.e. at charge neutralization, the starch chains had induced steric stabilization to the system. At higher particle and starch concentrations relaxation of the aggregates could be seen, as monitored by a decrease in turbidity with time. This relaxation was evaluated by fitting the data to the Kohlrausch-Williams-Watts function. It was found that irrespective of the starch to particle charge ratio the relaxation time was similar. Moreover, a molecular weight dependence on the relaxation time was found, as well as a more pronounced initial aggregated state for the higher molecular weight starch. This initial aggregate state could be due to bridging flocculation. With time, as the starch chains have relaxed into a final conformation on the particle surface, bridging will be less important and is gradually replaced by patches that will cause patchwise flocculation. After an equilibration time no molecular weight dependence on aggregation could be seen, which confirms the patchwise flocculation mechanism.

Co-assembly of chitosan and phospholipids into hybrid hydrogels

Novel hybrid hydrogels were formed by adding chitosan (Ch) to phospholipids (P) self-assembled particles in lactic acid. The effect of the phospholipid concentration on the hydrogel properties was investigated and was observed to affect the rate of hydrogel formation and viscoelastic properties. A lower concentration of phospholipids (0.5% wt/v) in the mixture, facilitates faster network formation as observed by Dynamic Light Scattering, with lower elastic modulus than the hydrogels formed with higher phospholipid content. The nano-porous structure of Ch/P hydrogels, with a diameter of 260±20 nm, as observed by cryo-scanning electron microscopy, facilitated the penetration of water and swelling. Cell studies revealed suitable biocompatibility of the Ch/P hydrogels that can be used within life sciences applications.

Thermal preparation of chitosan-acrylic acid superabsorbent: optimization, characteristic and water absorbency

Chitosan-acrylic acid superabsorbent polymer was successfully prepared by the thermal reaction without using initiator and crosslinker in air. The effects of some reaction variables on the water absorbency of this polymer were investigated by orthogonal tests, and the optimal conditions were described. The influences of temperature, time, ratio of the reactants and neutralization degree of acrylic acid on the reaction were further studied. These polymers were also prepared in nitrogen atmosphere and by using a radical initiator and compared against thermal reaction obtained polymers. The structures of the polymers were characterized by FT-IR, TGA, XRD, (13)C NMR and elemental analyses. The results showed that the thermal reaction product of acrylic acid with chitosan might form N-carboxyethyl grafted and amide-linked polymer and this product could absorb water 644 times its own dry weight. The possible mechanism for the thermal reaction was further suggested. The purpose of this research was to explore the friendly synthesized method of the superabsorbent.

Comparative advantages and limitations of the basic metrology methods applied to the characterization of nanomaterials

Fabrication of modern nanomaterials and nanostructures with specific functional properties is both scientifically promising and commercially profitable. The preparation and use of nanomaterials require adequate methods for the control and characterization of their size, shape, chemical composition, crystalline structure, energy levels, pathways and dynamics of physical and chemical processes during their fabrication and further use. In this review, we discuss different instrumental methods for the analysis and metrology of materials and evaluate their advantages and limitations at the nanolevel.

Electrodeposition of a biopolymeric hydrogel: potential for one-step protein electroaddressing

The electrodeposition of hydrogels provides a programmable means to assemble soft matter for various technological applications. We report an anodic method to deposit hydrogel films of the aminopolysaccharide chitosan. Evidence suggests the deposition mechanism involves the electrolysis of chloride to generate reactive chlorine species (e.g., HOCl) that partially oxidize chitosan to generate aldehydes that can couple covalently with amines (presumably through Schiff base linkages). Chitosan's anodic deposition is controllable spatially and temporally. Consistent with a covalent cross-linking mechanism, the deposited chitosan undergoes repeated swelling/deswelling in response to pH changes. Consistent with a covalent conjugation mechanism, proteins could be codeposited and retained within the chitosan film even after detergent washing. As a proof-of-concept, we electroaddressed glucose oxidase to a side-wall electrode of a microfabricated fluidic channel and demonstrated this enzyme could perform electrochemical biosensing functions. Thus, anodic chitosan deposition provides a reagentless, single-step method to electroaddress a stimuli-responsive and biofunctionalized hydrogel film.