Isosorbide as the structural component of bio-based unsaturated polyesters for use as thermosetting resins

Digital Light Processing 3D Printing of Isosorbide- and Vanillin-Based Ester and Ester-Imine Thermosets: Structure-Property Recyclability Relationships

Four isosorbide-based photocurable resins were designed to reveal correlations between the composition and chemical structure, digital light processing (DLP) three-dimensional (3D) printability, thermoset properties, and recyclability. Especially, the role of functional groups, i.e., the concentration of ester groups vs the combination of ester and imine functionalities, in the recyclability of the resins was investigated. The resins consisted of methacrylated isosorbide alone or in combination with methacrylated vanillin or a flexible methacrylated vanillin Schiff-base. The composition of the resins significantly affected their 3D printability as well as the physical and chemical properties of the resulting thermosets. The results indicated the potential of methacrylated isosorbide to confer rigidity to thermosets with some negative effects on the printing quality and solvent-resistance properties. An increase in the methacrylated vanillin concentration in the resin enabled us to overcome these drawbacks, leading, however, to thermosets with lower thermal stability. The replacement of methacrylated vanillin with the methacrylated Schiff-base resin decreased the rigidity of the networks, ensuring, on the other hand, improved solvent-resistance properties. The results highlighted an almost complete preservation of the elastic modulus after the reprocessing or chemical recycling of the ester-imine thermosets, thanks to the presence of two distinct dynamic covalent bonds in the network; however, the concentration of the ester functions in the ester thermosets played a significant role in the success of the chemical recycling procedure.

A Study of Isosorbide Synthesis from Sorbitol for Material Applications Using Isosorbide Dimethacrylate for Enhancement of Bio-Based Resins

Bio-based cross-linkers can fulfill the role of enhancing additives in bio-sourced curable materials that do not compare with artificial resin precursors. Isosorbide dimethacrylate (ISDMMA) synthesized from isosorbide (ISD) can serve as a cross-linker from renewable sources. Isosorbide is a bicyclic carbon molecule produced by the reaction modification of sorbitol and the optimal conditions of this reaction were studied in this work. The reaction temperature of 130 °C and 1% w/w amount of para-toluenesulfonic acid (p-TSA) were determined as optimal and resulted in a yield of 81.9%. Isosorbide dimethacrylate was synthesized via nucleophilic substitution with methacrylic anhydride (MAA) with the conversion of 94.1% of anhydride. Formed ISD and ISDMMA were characterized via multiple verification methods (FT-IR, MS, 1H NMR, and XRD). Differential scanning calorimetry (DSC) proved the curability of ISDMMA (activation energy Ea of 146.2 kJ/mol) and the heat-resistant index of ISDMMA (Ts reaching value of 168.9) was determined using thermogravimetric analysis (TGA). Characterized ISDMMA was added to the precursor mixture containing methacrylated alkyl 3-hydroxybutyrates (methyl ester M3HBMMA and ethyl ester E3HBMMA), and the mixtures were cured via photo-initiation. The amount of ISDMMA cross-linker increased all measured parameters obtained via dynamic mechanical analysis (DMA), such as storage modulus (E') and glass transition temperature (Tg), and the calculated cross-linking densities (νe). Therefore, the enhancement influence of bio-based ISDMMA on resins from renewable sources was confirmed.

The Effect of Glycol Derivatives on the Properties of Bio-Based Unsaturated Polyesters

The scope of the present study was to prepare fully bio-based unsaturated polyester resins (UPRs) with comparable properties to the commercial formulations. The focus was set on the determination of the optimal prepolymer formulation using the same set of diacids (itaconic and succinic acid) and different diols (propylene glycol, isosorbide and neopentyl glycol) or its equimolar mixtures, keeping the fixed molar ratio of 1:1:2.1 in all feed compositions. Instead of commonly used styrene, bio-based dimethyl itaconate was used as a reactive diluent (RD). The rheology of the obtained resins was studied in detail. The effect of the used diol on structural (FTIR), thermal (DSC), thermomechanical (DMA), and mechanical (tensile) properties was explained. The properties of UPRs were found to be highly dependent on the diol used in the prepolymer formulation. The UPR with an equimolar ratio of propylene glycol and neopentyl glycol was shown to be the most promising candidate to compete with the commercial petroleum-based resins.

The effect of methyl and methoxy substituents on dianilines for a thermosetting polyimide system

4,4′-Methylenedianiline (MDA) is widely used in high-temperature polyimide resins, including polymerization of monomer reactants-15. The toxicity of MDA significantly limits the manufacturability using this resin. Modifying the substitution and electronics of MDA could allow for the reduction of toxicity while maintaining the high-performing properties of the materials derived from the modified MDA. The addition of a single methyl substituent, methoxy substituent, location of these substituents, and location of the amine relative to the phenolic bridge were modified as were other non-aniline diamines. Various anilines were condensed with paraformaldehyde under acidic conditions to yield dianilines. These dianilines and diamines were reacted with nadic anhydride and 3,3′,4,4′-benzophenonetetracarboxylic dianhydride in methanol to form the polyamic acid oligomers and heated at elevated temperature to form polyimide oligomers. It was found that the molecular weight of the oligomers derived from MDA alternatives was generally lower than that of MDA oligomers resulting in lower glass transition temperatures ( T gs) and degradation temperatures. Additionally, methoxy substituents further reduce the T g of the polymers versus methyl substituents and reduce the thermal stability of the resin. Methyl-substituted alternatives produced polyimides with similar T gs and degradation temperatures. The toxicity of the MDA alternatives was examined. Although a few were identified with reduced toxicities, the alternatives with properties similar to that of MDA also had high toxicities.

Phosphorus-Containing Flame Retardants from Biobased Chemicals and Their Application in Polyesters and Epoxy Resins

Phosphorus-containing flame retardants synthesized from renewable resources have had a lot of impact in recent years. This article outlines the synthesis, characterization and evaluation of these compounds in polyesters and epoxy resins. The different approaches used in producing biobased flame retardant polyesters and epoxy resins are reported. While for the polyesters biomass derived compounds usually are phosphorylated and melt blended with the polymer, biobased flame retardants for epoxy resins are directly incorporated into the polymer structure by a using a phosphorylated biobased monomer or curing agent. Evaluating the efficiency of the flame retardant composites is done by discussing results obtained from UL94 vertical burning, limiting oxygen index (LOI) and cone calorimetry tests. The review ends with an outlook on future development trends of biobased flame retardant systems for polyesters and epoxy resins.

Ultrasound-Assisted Heterogeneous Synthesis of Bio-Based Oligo-Isosorbide Glycidyl Ethers: Towards Greener Epoxy Precursors

The substitution of toxic precursors such as bisphenol A by renewable and safer molecules has become a major challenge. To overcome this challenge, the 12 principles of green chemistry should be taken into account in the development of future sustainable chemicals and processes. In this context, this paper reports the highly efficient synthesis of oligo-isosorbide glycidyl ethers from bio-based starting materials by a rapid one-pot heterogeneous ultrasound-assisted synthesis. It was demonstrated that the use of high-power ultrasound in solvent-free conditions with sodium hydroxide microbeads led for the first time to a fully epoxidated prepolymer with excellent epoxy equivalent weight (EEW). The structure of the epoxy precursor was characterized by FT-IR, NMR spectroscopy and high-resolution mass spectrometry (HRMS). The efficiency of the ultrasound-assisted synthesis was attributed to the physical effects caused by micro-jets on the surface of the solid sodium hydroxide microspheres following the asymmetrical collapse of cavitation bubbles.

Isosorbide as Core Component for Tailoring Biobased Unsaturated Polyester Thermosets for a Wide Structure-Property Window

Biobased unsaturated polyester thermosets as potential replacements for petroleum-based thermosets were designed. The target of incorporating rigid units, to yield thermosets with high thermal and mechanical performance, both in the biobased unsaturated polyester (UP) and reactive diluent (RD) while retaining miscibility was successfully achieved. The biobased unsaturated polyester thermosets were prepared by varying the content of isosorbide, 1,4-butanediol, maleic anhydride, and succinic anhydride in combination with the reactive diluent isosorbide-methacrylate (IM). Isosorbide was chosen as the main component in both the UP and the RD to enhance the rigidity of the formed thermosets, to overcome solubility issues commonly associated with biobased UPs and RDs and volatility and toxicity associated with styrene as RD. All UPs had good solubility in the RD and the viscosity of the mixtures was primarily tuned by the feed ratio of isosorbide but also by the amount of maleic anhydride. The flexural modulus and storage modulus were tailorable by altering the monomer composition The fabricated thermosets had superior thermal and mechanical properties compared to most biobased UP thermosets with thermal stability up to about 250 °C and a storage modulus at 25 °C varying between 0.5 and 3.0 GPa. These values are close to commercial petroleum-based UP thermosets. The designed tailorable biobased thermosets are, thus, promising candidates to replace their petroleum analogs.

Simple One-Pot Synthesis of Fully Biobased Unsaturated Polyester Resins Based on Itaconic Acid

For the preparation of fully biobased unsaturated polyester resins (UPRs), the replacement of styrene with alternate nonpetroleum-based monomers turned out to be one of the most challenging tasks. Its complexity lies in the fact that reactive diluents (RD) have to have low viscosity and volatility, good compatibility with prepolymer, and capability to homopolymerize and copolymerize with its unsaturations. In this context, we directed our efforts to develop fully biobased UPRs using the dialkyl itaconates as an alternative to styrene. Therefore, a series of 100% biobased UPRs were prepared from itaconic acid and 1,2-propandiol and diluted by dialkyl itaconates. The resins were characterized by Fourier transform infrared spectroscopy, NMR, volatility, and viscosity measurements, while the cured samples were characterized by dynamic mechanical properties, thermomechanical analysis, thermogravimetric analysis data, and tensile tests. The influence of RD structure on the properties of cured samples was discussed in detail. It was shown that the prepared resins had evaporation rates of dialkyl itaconates of several orders of magnitude less compared to styrene. The cured resins with dimethyl itaconate showed comparable or even better thermal and mechanical properties compared to the one with styrene. This investigation showed that itaconic acid and dialkyl itaconates are promising bioresources for the preparation of fully biobased UPRs for mass consumption.

The Closure of the Cycle: Enzymatic Synthesis and Functionalization of Bio-Based Polyesters

The polymer industry is under pressure to mitigate the environmental cost of petrol-based plastics. Biotechnologies contribute to the gradual replacement of petrol-based chemistry and the development of new renewable products, leading to the closure of carbon circle. An array of bio-based building blocks is already available on an industrial scale and is boosting the development of new generations of sustainable and functionally competitive polymers, such as polylactic acid (PLA). Biocatalysts add higher value to bio-based polymers by catalyzing not only their selective modification, but also their synthesis under mild and controlled conditions. The ultimate aim is the introduction of chemical functionalities on the surface of the polymer while retaining its bulk properties, thus enlarging the spectrum of advanced applications.

New unsaturated copolyesters based on 2,5-furandicarboxylic acid and their crosslinked derivatives

The synthesis and characterisation of a novel family of unsaturated polyesters (UPs) and their crosslinked resins (UPRs), based on 2,5-furandicarboxylic acid (FDCA), are reported.